BOXLIGHT CP-14t manual

USER’S GUIDE BO XLIGHT CP-14t[...]

2 INFORMA TION T O THE USER NO TE : This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursuant to P ar t 15 of FCC Rules. These limits are designed to provide reasonab le protection against har mful interf erence when the equipment is operated in a commercial environment. This equipment generates , u[...]

3 IMPOR T ANT SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Do not use attachments no[...]

4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 16 COMPUTER MODE 24 VIDEO MODE 30 SETTING 32 APPENDIX 33 PREP ARA TION 6 NAME OF EACH PART OF THE PROJECTOR 6 SETTING-UP THE PROJECTOR 7 POSITIONING THE PROJECTOR 8 ADJUSTABLE FEET 8 CONNECTING THE AC POWER CORD 8 VENTILATION 8 MOVING THE PROJECTOR 9 CONNECTING THE PR OJECT OR 10 TERMINA[...]

5 FEA TURES AND DESIGN This Multimedia Projector is designed with most advance technology for portability, durability, and ease for use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector is compatible with many different types [...]

6 PREP ARA TION NAME OF EA CH P AR T OF THE PR OJECT OR This Air Intake Vent should not be blocked. BO TT OM OF THE CABINET B A CK OF THE CABINET CARRY HANDLE HOT AIR EXHAUSTED ! Air blown from the exhaust vent is hot. When using or installing the projector, the following attention should be taken. ● Do not put a flammable object near this vent. [...]

7 PREP ARA TION SETTING-UP THE PR OJECT OR POSITIONING THE PR OJECT OR ROOM LIGHT The brightness in the room has a great influence on the picture quality. It is recommended to limit ambient lighting in order to provide the best image. ADJUST ABLE FEET Picture tilt and projection angle can be adjusted by twisting ADJUSTABLE FEET. Projection angle ca[...]

8 PREP ARA TION ● Do not cover the vent slot. ● Keep the rear grill at least 3 feet (1m) away from any object. ● Keep the bottom clear of any obstruction. Obstructions may block cooling air. This projector is equipped with the cooling fans for protection from overheating. Pay attention to the following to ensure ventilation and avoid a possib[...]

9 PREP ARA TION MO VING THE PR OJECT OR Use the Carry Handle when moving the Projector. ● When moving the projector, replace the lens cover and retract feet to prevent damage to the lens and cabinet. NOTE The carrying bag (supplied) is intended for protection from dust and scratches on the surface of the cabinet, and is not designed to protect th[...]

▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R – AUDIO – L S-VIDEO 10 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR Connect the computer output to this terminal. (Refer to P12 ~15.) When controlling the computer with the Remote Control of this projector, connect the mouse port to this connector. ([...]

11 CONNECTING THE PR OJECT OR ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING T O THE VIDEO EQUIPMENT Satellite TV Turner Video Cassette Recorder Video Disc Player Video Audio Cable ✽ S-VIDEO Cable ✽ Audio Amplifier Audio Speaker (stereo) External Audio Equipment Audio Cable ✽ (S[...]

12 CONNECTING THE PR OJECT OR CONNECTING T O THE IBM-COMP A TIBLE COMPUTER To connect to the IBM-compatible computer, refer to the figure below. IBM-COMPATIBLE COMPUTERS (VGA / SVGA / XGA / SXGA) VGA Cable (supplied) Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Serial Cable ✽ (refer to P10.) Control Cable[...]

13 B A ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT (MONO) VIDEO R-AUDIO-L S-VIDEO CONNECTING THE PR OJECT OR To disconnect MOUSE CABLE, 1. Hold the portion (B) of the connector with one hand. 2. Pull the portion (A) to the arrow direction and remove connector. CONTROL PORT AUDIO OUT AUDIO IN MONITOR OUT COMPUTER IN SERIAL [...]

14 CONNECTING THE PR OJECT OR ON 1 2 3 4 56 DIP CONNECTION T O THE MA CINT OSH COMPUTER To connect to the Macintosh computer, refer to the figure below. MACINTOSH COMPUTERS (VGA / SVGA / XGA / SXGA) VGA Cable Monitor Output Desktop type Laptop type Monitor Audio Speaker (stereo) Audio Amplifier Control Cable for ADB Port ✽ Audio Cable ✽ (stereo[...]

B A ▼ COMPUTER IN MONITOR OUT CONTROL PORT AUDIO IN SERIAL AUDIO OUT VIDEO R-AUDIO-L S-VIDEO (MONO) ON 1 DIP ON OFF 23456 13" MODE (640 x 480) 16" MODE (832 x 624) 19" MODE (1024 x 768) OFF ON ON ON ON ON ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF 12 34 5 6 OFF OFF ON ON ON ON 21" MODE (1152 x 870) 15 CONNECTING THE PR [...]

16 BEFORE OPERA TION OPERA TION OF THE REMO TE CONTROL This remote control unit is not only able to operate the projector but can also be used as a wireless mouse for a PC. POINT button and two CLICK buttons are used for wireless mouse operation. (Refer to page 33.) Wireless mouse is usable when PC mouse pointer is displayed on the screen. The wire[...]

17 BEFORE OPERA TION Remote Contr ol Batteries Installation 1 2 3 Slide the lid upward. Press the lid downward and slide it. For correct polarity (+ and – ), be sure the battery terminals are in contact with the pins in the compartment. Remove the battery compartment lid. Slide the batteries into the compartment. Replace the compartment lid. Oper[...]

18 BEFORE OPERA TION T OP CONTR OLS AND INDICA T ORS LAMP REPLACE LAMP W ARNING TEMP . READ Y MODE A UTO IMA GE NORMAL MENU V OLUME SELECT FOCUS ZOOM ON-OFF Used to select zoom adjust. (Refer to P22.) Used to open or close the MENU operation. (Refer to P19.) MENU BUTTON MODE BUTTON AUTO IMAGE BUTTON READY INDICATOR SELECT BUTTON POWER ON – OFF BU[...]

19 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears. Move the POINTER (red frame) to the ITEM ICON that you want to select by pressin[...]

20 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P24) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / White Balance / Contrast / Brightness] (Refer to P27) PC ADJUST MENU Used to adjust the parameters to match with the input signal format. (Refer to P25) SETTING MENU Used to set the Dis[...]

21 B ASIC OPERA TION T urning on the Projector Connect the projector's AC power cord into a wall outlet. The LAMP POWER indicator lights RED, and the READY indicator lights GREEN. Press the power ON-OFF button on the Remote Control Unit or on the Top Control to ON. The LAMP POWER indicator dims, and the Cooling Fans start to operate. The Prepa[...]

22 B ASIC OPERA TION ADJUSTING THE PICTURE ZOOM Adjustment 1 Press ZOOM / button on the Remote Control Unit or ZOOM ▲ / ▼ button on the Top Control to turn on the ZOOM mode. 2 Press ZOOM or ▲ button to make the image larger, and press ZOOM or ▼ button to make the image smaller. Zoom The message disappears after 4 seconds. FOCUS Adjustment 1[...]

23 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SOUND and press the SELECT button. Another dialog box SOUND ADJUST Menu will appear. B ASIC OPERA TION Sound Volume Adjustment Press the VOLUME (+/ – ) buttons (located on the Top Control or on the Remote Control Unit) to adjust the volume. T[...]

24 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Computer and press the SELECT button. COMPUTER MODE SELECTING COMPUTER MODE Direct Operation Select Computer mode by pressing the MODE button on the Top Control or the Remote Control Unit. Menu Operation When selecting the Computer Mode, the Cu[...]

25 COMPUTER MODE PC ADJUSTMENT This Projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by this projector. If this happens, the projector cannot reproduce a proper image and the [...]

26 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and less than 165 MHz of Dot Clock. NOTE : Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720[...]

27 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to ▲ or ▼ of the item that[...]

28 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT button. Another dialog box AUTO IMAGE Menu will appear. Move the arrow to[...]

29 COMPUTER MODE PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button. Another dialog box PICTURE POSITION Menu will appear. Sel[...]

30 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT button. SELECTING VIDEO MODE Direct Operation Select VIDEO mode by pressing the MODE button on the Top Control or the Remote Control Unit. Menu Operation SELECTING COLOR SYSTEM Press the MENU button and the[...]

31 VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to ▲ or ▼ of the item that yo[...]

32 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press the SELECT butt[...]

33 APPENDIX OPERA TING WIRELESS MOUSE Installation The Wireless Remote Control Unit is not only able to operate the projector but also can be used as a wireless mouse for a PC. POINT buttons and two CLICK buttons are used for wireless mouse operation. Wireless mouse is available only when PC mouse pointer is displayed on the screen. When the menu o[...]

34 CLEANING THE PR OJECTION LENS Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth. Avoid using an excessive amount of cleaner. Abrasive cleaners, solvents or other harsh chemicals might scratch the lens. When you are not using the projector, replace the lens cover. 1 3 Lightly wipe the cleaning cloth over the lens. 2 Follow th[...]

35 APPENDIX LAMP REPLA CEMENT Indicator When the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image become dark or the color of the image becomes unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug. Allow the projector to cool for at least 45 minutes. Re[...]

36 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in the section "CONNECTING THE PROJECTOR" on pages 10 ~ 15. 2. Check cable connection. Verify that all computer, video and power cord [...]

37 APPENDIX W ARNING : High v oltages are used to operate this projector . Do not attempt to open the cabinet. Remote Control Unit does not work. ● Check the batteries. ● Make sure nothing is between the Remote Receiver and the Remote Control Unit. ● Make sure you are not too far from the projector when using the Remote Control Unit. Maximum [...]

38 0.9" TFT Active Matrix type, 3 panels TECHNICAL SPECIFICA TIONS Multi-media Projector 9.26 lbs (4.2 kg) 8.46" x 4.29" x 12.85" (215mm x 109mm x 326.5mm) 1024 x 768 dots 2,359,296 (1024 x 768 x 3 panels) PAL, SECAM, NTSC, NTSC4.43 and PAL-M H-sync. 15 ~ 100 KHz, V-sync. 50 ~ 100 Hz Adjustable from 30 ” to 300 ” 800 TV line[...]

39 OPTIONAL P AR TS The parts listed below are optionally supplied. When ordering those parts, give the name and the Type No. of it to the sales dealer. ● Control Cable for Serial Port Type No. : POA-MC12SRL ● Control Cable for ADB Port Type No. : POA-MC12MAC ● MAC Adapter Type No. : POA-MACAP[...]

LIMITED W ARRANTY BOXLIGHT CORPORATION ( “ BOXLIGHT ” ) warrants that each Boxlight CP-14t ( “ the Product ” ) sold hereunder will conform to and function in accordance with the written specifications of BOXLIGHT. Said limited warranty shall apply only to the first person or entity that purchases the Product for personal or business use and[...]