Buffalo TeraStation 5200DWR manual

T eraSta tion 5000 and 5000N U ser Manual Americas: www .buf faloamericas.com Europe: www .buf falo-technology .com Asia Pacific: www .buf falo-asia.com 35020018-12 2015.07[...]

1 C on tents Chapter 1 Installa tion ..................................................... 9 Diagrams ........................................................................................... 9 T urning the T eraS tation On and Off............................................. 12 Changing the A dministra tor P asswor d ............................[...]

2 Chapter 4 Managing St orage...................................... 39 RAID Arra y s .................................................................................... 39 W orking with R AID Arr ay s ............................................................ 40 Using JBOD .........................................................................[...]

3 Deleting V olumes ..................................................................................... 78 Hard Driv e Replacemen t .............................................................. 80 Hard Driv e Replacement Examples ........................................................ 81 Chapter 5 Backup ........................................[...]

4 Chapter 7 BitT orrent .................................................. 119 Chapter 8 Multimedia ............................................... 122 DLNA ............................................................................................ 122 Playing F iles .................................................................................[...]

5 Client T ools .................................................................................. 151 Camer a P olicies ...................................................................................... 151 Live V iewer ............................................................................................. 151 Data Service P olicies ....[...]

6 P or t T runking ............................................................................... 176 C onfiguring Port T runk ing .................................................................... 177 C onnec ting a Prin ter ................................................................... 178 Setting Up a Printer with W indow s 8.1, Windo ws[...]

7 Updating the F irm war e ............................................................... 199 Updating Manually ................................................................................ 199 Updating A utomatically ........................................................................ 199 Name , Date , T ime , and Language ................[...]

8 Specifications .............................................................................. 223 Chapter 13 Regula tor y C ompliance Informa tion .... 225 F or C ustomers in the United S tates ........................................... 225 F or C ustomers in E urope ............................................................ 225 F or C ustomer[...]

9 Chapter 1 Installa tion Diagrams TS5800D , TS5800DN, TS5800DWR ± ¶ · ¸ ² ³ ´ µ ±µ ¹ ±° ±± ±² ±³ ±´ ±µ ±¶ ±· ±¸ ±¹ ²° ²± ²´ ²µ TS5600D , TS5600DN ±° ±± ±² ± ¶ · ¸ ² ³ ´ µ ±µ ¹ ±³ ±´ ±µ ±¶ ±· ±¸ ±¹ ²° ²± ²´ ²µ[...]

10 TS5400D , TS5400DN, TS5400DWR ±° ± ¶ · ¸ ¹ ±± ±² ² ³ ´ µ ±¹ ²° ²± ±³ ±´ ±µ ±¶ ±· ±¸ ²´ ²µ TS5200D , TS5200DN, TS5200DS, TS5200D WR ±° ± ² ³ ´ µ ¶ · ¸ ¹ ±± ±² ±¹ ±³ ±´ ±µ ±¶ ±· ²± ±¸ ²° ²´ ²µ TS5400R, TS5400RH, T S5400RN, TS5400RWR ²´ ²µ ±° ± ²³ ´ µ¶ ·¸ ±± ?[...]

11 T o power on, connect the power cable and w ait for 10 seconds , then press the power butt on. T o power off , press the pow er button twice. 2 Info LED If there is a status message, the amber inf o LED will light up. Check the L CD panel to see the status message. 3 Error LED If there is an error , the red error LED will light up . Check the L [...]

12 This second Ethernet port may be used for network redundancy or backup. Y ou may connect a second T eraStation directly to this port for backup. 19 Po wer C onnector Use the included power cable t o connect to an UPS, surge protector , or outlet. 20 Fa n Do not block the fan. 21 Anti- Theft Securit y Slot Use this slot to secure y our T eraStati[...]

13 2 Right-click your T eraStation's icon and select Settings . F or Mac OS, select the T eraStation's icon while holding down the contr ol key , then select Settings . 3 Enter the username and passwor d, then click OK . Note: The default username and passwor d are "admin" and "passwor d" .[...]

14 4 Settings will open. 5 Click at the top-right of Settings and choose either Restar t or Shut Down . When all the LEDs on the front of the T eraStation turn off, the shut down process is c omplete. Changing the A dministra tor P assw ord After initial setup , follow this proc edure to change your passw ord. 1 Double -click the icon to start NAS [...]

15 2 Right-click on your T eraStation's icon and select Settings . On the Mac, select the T eraStation's icon while holding down the contr ol key , then select Settings . 3 Click Easy Admin . 4 Click Change Passw ord .[...]

16 5 If this screen is displayed , enter the current passw ord and click OK . The default passw ord is "passwor d" . 6 Enter the new passwor d (twice) and click Next . 7 Click OK . Y ou have changed the admin passwor d. Crea ting a Reco v er y Driv e T o initialize all of the T eraStation's settings, or just rest ore the admin passwo[...]

17 1 Inser t a 1 GB or larger USB flash drive int o a USB por t on the T eraSta tion. Note: All data on the USB flash drive will be erased! 2 In Settings, navigate to Management - Restor e/Erase - USB Options . 3 Select Create a USB drive for initializing settings . 4 Select the USB memor y device from "T arget USB drive" , then click Exe[...]

18 Chapter 2 C onfigura tion Configure and manage y our T eraStation using the Settings inter face, ac cessible from a bro wser window . Open the interface using the procedure below or type the T eraSta tion's IP address in the URL field of your br owser . Within Settings, the Easy Admin page giv es you quick access t o commonly used settings.[...]

19 3 Enter the username and passwor d and click OK . Notes: • If the time -out period is set to "10 minutes" , you will be logged out of Settings after 10 minutes of inactivity. • Click Secure Connection to log in with an encrypted connection. 4 Settings will open. Notes: • Username/P assword C ombinations: Username P asswo[...]

20 • Click to open Easy Admin. • Click to play a tone fr om the T eraStation for easy location. • Y ou can also use Bonjour to log in to Settings from OS X 10.4 or later . I n Safari, click View - Show Bookmarks Bar . F rom Bookmarks, click Bonjour - T er aStation name . Opening Easy Admin The Easy Admin page makes it easy to change [...]

21 3 Click Easy Admin . 4 The Easy Admin scr een will open. Notes: • If you click any buttons , y ou will need to enter a username and passwor d. • In Advanced Settings, click the icon a t the top left to open Easy Admin.[...]

22 Chapter 3 A cc ess Restric tions Y ou may restrict access to specific shar ed folders, including e xternal USB drives. Notes: • Access r estrictions can be set separately for each shared f older , but not for folders within the shared f olders. • Configure ac cess restrictions through Settings. Configuring acc ess restrictions through [...]

23 4 Configure the desir ed settings, then click OK . Notes: • Names may contain up to 27 alphanumeric characters , hyphens (-), and underscor es (_). Do not use a symbol as the first character in a name. • The description may contain up t o 75 alphanumeric characters, hyphens (-), underscor es (_), and spaces. Do not use a symbol or spac[...]

24 • The follo wing characters are handled differ ently by Mac OS and Windo ws. A void using these characters when sharing data between Mac OS and Window s: • Window s does not suppor t some characters that Mac OS and the T eraStation allow . If you creat e a filename on a Mac with any of the follo wing characters, it will not display cor[...]

25 Recycle Bin T o protect your data from ac cidental deletion, you may c onfigure your T eraStation to use a recycle bin instead of deleting files immediately . The r ecycle bin will only work with SMB connections. T o empt y the recycle bin, click F ile Sharing - F older Setup - Empty Rec ycle Bin in Settings. Notes: • Y ou can preven t gues[...]

26 4 Enter the desired settings , then click OK . Notes: • Usernames may contain up t o 128 characters, including hyphens (-), underscor es (_), periods (.), !, #, &, @, $, *, ^, and %. Do not use a symbol as the first character . • The user ID should be a number from 1000 to 1999. Each user ID should be unique . If this field is left[...]

27 username2,password2,commen t2 username3,password3,commen t3 Guidelines: • Use commas (,) as separators. Do not put spaces bef ore or after commas. • I f a line has an incorrect format, the user on tha t line will not be register ed. • I f a username exists, the new user inf ormation will overwrite the old information. • Do no[...]

28 4 Enter settings, then click OK . Notes: • Group names may con tain up to 20 alphanumeric characters, hyphens (-), undersc ores (_), and periods (.). Do not use a symbol other than an underscore (_) as the first character . • Group descriptions may contain up t o 75 alphanumeric characters, hyphens (-), underscor es (_), and spaces. Do[...]

29 C onfiguring A cc ess Restric tions Local Users and Gr oups 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click the shared folder tha t you want to set acc ess restrictions for . 4 Click Edit . 5 Enable " Access Restrictions" . 6 Select the level of access for the user or gr oup you added.[...]

30 : Read and write access allow ed : Read access allowed : Access pr ohibited 7 Click OK . Notes: • The example abov e shows access r estriction by user . T o restrict access b y group , click the L ocal Groups tab and select group permissions. • If both read-only and read & write permissions are given to a user , the user will have [...]

31 4 Select " Active Dir ector y" , then click Nex t . 5 Click Ye s . 6 Enter the desired settings , then click OK . 7 Click to the right of "F older Setup" .[...]

32 8 Click a shared folder tha t you want to set acc ess restrictions for . 9 Click Edit . 10 Enable " Access Restrictions" . 11 Selec t the level of ac cess for the user or gr oup. : Read and write access allow ed : Read access allowed : Access pr ohibited 12 Click OK . Notes: • T o have the T eraStation join an Active Directory dom[...]

33 • Don't disable the SMB protocol while Active Directory is used for access restrictions. If you do , you will need to enable SMB again and reconfigur e AD from scratch. NT Domain In an NT domain environment, the T eraStation uses account inf ormation from the NT domain server to set access restrictions for files and folders on the T er[...]

34 7 Enter settings and click OK . 8 Click to the right of "F older Setup" . 9 Click a shared folder f or which you want t o set access restrictions. 10 Click Edit . 11 Enable " Access Restrictions" . 12 Selec t the level of ac cess for "Domain Users" or "Domain Groups" y ou added. : Read and write access all[...]

35 Notes: • If you change the T eraStation's name, you will no longer be able t o use domain users and groups or access restrictions. T o repair this, rejoin the domain. • If both read-only and read & write permissions are given to a user , the user will have r ead-only access. • If a domain username is more than 20 bytes lo[...]

36 4 Select " W orkgroup " and click Next . 5 If a prompt appears, click Ye s . 6 Enter a workgr oup name. Select " Assign authorization to external SMB ser ver" and enter the SMB server's IP address. Y ou can also specify a ser ver fr om another subnet. 7 If " Automatic user registration " is checked, users that [...]

37 information (including passwor ds) will be remov ed from the NAS. External users cannot be reverted to local users. 10 Click to the right of "F older Setup" . 11 Click a shared folder to set ac cess restrictions on. 12 Click Edit . 13 Enable " Access Restrictions" . 14 Click on the External Users tab and selec t the level of [...]

38 • If using a Windows PC f or external authentication, the default Windo ws SMB security settings may need to be changed. An easy wa y to do this is to run the F ile Sharing Security Level Change T ool, available from this product's download page on the Buffalo website . This utility will let you easily change or r estore your Window s [...]

39 Chapter 4 Managing St or age RAID Arra y s T eraStations support many types of RAID. The type of RAID ar ray s available for use depends on ho w many drives ar e installed in your T eraSta tion. T eraStation Default RAID Mode TS5800D , TS5800DN, TS5800DWR TS5600D , TS5600DN TS5400D , TS5400DN, TS5400DWR TS5400R, TS5400RH, TS5400RN, TS5400RWR RAI[...]

40 RAID 5 * RAID 5 arrays are a vailable for T eraStations with 3 or more hard drives . RAID 5 combines 3 or more drives into a single array . The usable space is equal to the sum of the capacity of the hard drives minus the capacity of one drive. F or example, if 4 drives ar e combined into a RAID 5 array , the usable space is the sum of 3 drives.[...]

41 Using JBOD With JBOD , each hard drive in the T eraStation is addressed separa tely . T o put drives fr om an array into JBOD , follow the steps below . 1 In Settings, click Drives . 2 Click to the right of "RAID" . 3 Click the array to delete . 4 Click Delete RAID Array . Once JBOD is configured , create shar ed folders on each drive [...]

42 3 Click the array to delete . Note: If the "RAID Mode" field is blank , the array is alr eady in JBOD . Proc eed to step 7. 4 Click Delete RAID Array . 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Click OK . 7 Choose a RAID array . 8 Select a RAID mode and the dr ives t o be [...]

43 9 Step through the wizar d to create the arra y . Notes: • Y ou can also configure RAID settings from Easy A dmin. • After changing the RAID mode, cr eate a shared f older . C onfiguring a Hot Spare If you have a hot spar e configured and an array fails , the T eraStation immediately switches over t o the hot spare. T o use a hot spare[...]

44 (3) Click Rediscover Disk . (4) Navigate to Driv es - RAID . (5) Choose the RAID array to repair . (6) Click the drive that was previously c onfigured as a hot spare , then click "Recover RAID Array" . This will rebuild the RAID array . RMM (RAID Mode M anager) With RMM, y ou can create or expand a RAID array without er asing the data [...]

45 5 Check " Add a disk to RAID array with RMM. Y our data will be preser ved . " . 6 Select the drive whose data will be saved from the dr op- down menu. 7 Select the drive to add to the RAID array . 8 Click Create RAID Array . 9 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . Adding [...]

46 3 Choose a RAID array . 4 Select the drive to add to the RAID array . 5 Click Create RAID Array . 6 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . Changing the RAID Mode While A dding a Drive Select the drive you want to add to the RAID array and choose the mode f or the array . Enter the &q[...]

47 1 In Settings, click Drives . 2 Move the RAID scanning switch to the position to enable RAID scanning. 3 Click to the right of "RAID Scanning" . 4 Click Edit . 5 Select when to run the scan and click OK . Notes: • Check "Immediately" to run RAID maintenance immediat ely . • T o stop a RAID scan, click Cancel RAID Sc[...]

48 • DUB and DIU series dr ives Supported file systems for external drives are below: • F A T32 • EX T3 • XFS • NTFS • HFS+ (read- only) Connect only one device to each USB port of the T eraStation. Some external drives with automatic power -on don' t turn on automatically when connected to the T eraStation. Use t[...]

49 3 Select the drive to dismount and click Dismount Disk . 4 When the follo wing message is displayed, it is saf e to unplug the drive . Note: T o remount the drive, unplug it and then plug it back in. Checking Drives A disk check tests the data on a drive in the T eraStation or connected via USB for integrity . Errors ar e fixed automatically . W[...]

50 3 Select the drive to test, then click Check Disk . 4 Click Check . Y ou have the option of deleting information files fr om Mac OS during the check if desired. S.M.A.R.T . S.M.A.R.T . (Self-M onitoring , Analysis, and Reporting T echnology) monitors hard drives to det ect and repor t various indicators of reliability , in the hope of anticipati[...]

51 3 Select a drive to check and click S.M.A.R. T . 4 The S.M.A.R.T . information for the drive will be displa yed. Diff erent inf ormation may be displayed depending on the brand of drives in your T eraStation. Critical attributes are display ed in bold. Attributes with curr ent value less than or equal to the threshold value ma y be significant. [...]

52 2 Select Drives to format an internal drive or USB Driv es to format an external drive. 3 Select the drive to format, then click F ormat Disk . 4 Select a format type, then click F ormat .[...]

53 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Depending on the size of your drive , the format may take sev eral minutes or several hours t o complete. "F ormatting" will be displayed on the L CD display until the format is complete . Notes: • Do not turn off or disconnec[...]

54 Encr ypting Driv es Internal drives (and arrays) can be encrypted with 128-bit AES during formatting. Encrypted drives and arrays ar e then readable only from that specific T eraStation. T o unencr ypt a drive or array , uncheck "Encryption" and format it again. Media Car tridges If configured as a media cartridge, an internal drive ca[...]

55 • If the T eraStation fails to boot after drive 1 or 2 is replac ed, remo ve any media cartridges, then replace them after the T eraStation has booted . Erase Da ta on the T er aStation C ompletely Under some circumstances , data from formatt ed drives can be recov ered. The disk erasure proc ess in this section does a much more thorough jo[...]

56 4 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 5 All data on the T eraStation will be permanently erased. Disk Quotas Y ou can set a disk quota to limit drive space f or each user or group . Y ou can also set an aler t space. If the drive space exceeds the set alert space, an email notific[...]

57 2 Click to the right of "Users" . 3 Select the user whose space will be limited. 4 Enable quotas, choose the maximum space the user will be allow ed to use, and click OK . Note: If you change the primary group, r estar t the T eraSta tion to apply the quota settings. 5 Click OK . Quotas for Groups F ollow the procedur e below to limit [...]

58 5 Click Close . 6 Click to the right of "Users" . 7 Select the user who will inherit the group quota settings. 8 Change the user's primar y group t o the group with the quota, then click OK . 9 Click OK . Size Limits If L VM is enabled , volumes can be created with maximum siz e limits. 1 In Settings, click Drives . 2 Click to the[...]

59 6 Click Edit under "NAS V olume" . 7 Click Create V olume .[...]

60 8 Configure the desir ed settings, then click OK . 9 Click OK . 10 Click Close . 11 Click Close . 12 Navigate to F ile Sharing - F older Setup . 13 Click Create F older . 14 Configure the settings. 15 Selec t the volume tha t you created and click OK . Using the T er aStation as an iSCSI De vice Introduction iSCSI is a protocol f or carr ying SC[...]

61 Installing a Connection T ool W indows XP , W indow s Server 2003 Before using an y iSCSI equipment, download and install the iSCSI connection software "Microsoft iSCSI Soft ware Initiator" from the Microsoft website . If using TS5000 series T eraStations, you can also use Buffalo iSCSI Connection T ool to c onnect to an iSCSI hard dri[...]

62 3 Select the drive or array where the volume will be cr eated and click Enable L VM on V olume . 4 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 5 Click OK . 6 Click Close . Note: If you click Show under "V olume List" , the volumes will be listed on the screen and you can see if [...]

63 9 Click Create V olume . 10 Enter a volume name, v olume description, volume, and siz e (if you enabled L VM), then click OK . The volume size tha t you specify here can be changed lat er . T o change the volume size, ref er to the "Expanding V olume Sizes" section below . 11 The "Confirm Operation " screen will open. Enter t[...]

64 2 Enter the IP address of the T eraStation into the "T arget" field and click Quick Connect . 3 Confirm if the connection is established and click Done . Connecting a volume is finished. If using the connected volume for the first time, the v olume should be formatted t o be used as a local drive. F ollow the procedur e below for f orm[...]

65 3 Right-click the disk volume that shows the status "Unallocated" and click New Simple V olume from the displayed menu . Follo w the screen to finish f ormatting. F ormatting a volume is finished. When the formatting process is complet ed, the drive will be visible as an icon in Computer or My Comput er and can be used as a normal driv[...]

66 2 Select the T eraStation name from the drop-down menu of "T arget" and click Regist er iSCSI Device . 3 Click OK .[...]

67 4 Select a volume to connect from the drop-down menu of " V olume" and click Connect . 5 Click OK . Connecting a volume is finished. If using the connected volume for the first time, the v olume should be formatted t o be used as a local drive. F ollow the procedur e below for f ormatting. 1 In Windows , navigate t o Control P anel - A[...]

68 2 Select a volume to disconnect from the drop-down menu of " V olume" and click Disconnect . 3 Click Ye s . 4 Click OK .[...]

69 5 Select the T eraStation name from the drop-down menu of "T arget" and click Unr egister iSCSI Device . 6 Click OK . Disconnecting a volume is finished. Using with Multiple C omputers If the T eraStation is divided into multiple v olumes (or drives), it can be used with multiple computers. Ho wever , multiple computers cannot be acces[...]

70 Configuring A cc ess Restrictions for the Entire T eraSta tion 1 In Settings, click Drives . 2 Click to the right of "iSCSI" . 3 Click the Security tab. 4 Click Edit under " Access C ontrol ( T arget Discovery)" . 5 Enable access restrictions, ent er the username and password, and click OK . Note: T o enable mutual authentica[...]

71 3 In the "Discovery" tab, click Discov er Portal . 4 Enter the T eraSta tion's IP address in the "IP address or DNS name" field . 5 Click Adv anced . 6 Check "Enable CHAP log on" and enter the configur ed username to the "Name" field and password in to the "T arget secr et" field. If the mut[...]

72 3 The screen to en ter the username and password will be display ed. Enter the c onfigured username and password fr om step 5 of the "Configuring A ccess Restrictions for the Entire T eraStation" section above and click OK . If mutual authentication is enabled, check "Mutual Authen tication" , then click OK . 4 If "Mutua[...]

73 6 Select a volume to connect from the drop-down menu of " V olume" and click Connect . 7 Click OK . Accessing the v olume on the access-restricted T eraStation is finished. Configuring A cc ess Restrictions for Individual V olumes If access restrictions are configured f or a volume, tha t volume cannot be accessed unless the username a[...]

74 4 Enable access restrictions, ent er a client IQN (optional), username, and passwor d, and click OK . Note: T o enable mutual authentication, check "Enable Mutual Authentication" in the screen abo ve and enter the mutual authentication passwor d. 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , th[...]

75 If the mutual authentication is enabled, check "P er form mutual authentica tion" . 7 Click OK twice. 8 In the " T argets" tab , select the volume from "Discov ered targets" and click Connect . 9 Click Adv anced . 10 Check "Enable CHAP log on" and enter the configur ed username into the "Name" fi[...]

76 3 Select a volume to connect from the drop-down menu of " V olume" and click Connect . 4 The screen to en ter the username and password will be display ed. Enter the c onfigured username and password fr om step 4 of the "Configuring A ccess Restrictions for Individual V olumes" sec tion above and click OK . If mutual authenti[...]

77 5 If "Mutual Authentication" is checked , the following scr een will be displayed. En ter the mutual authentication password and click OK . 6 When authentication is successful , click OK . Accessing the ac cess-restricted volume is finished. Expanding V olume Sizes The volume size of the e xisting volumes can expand after they are crea[...]

78 4 Enter the desired v olume size to add and click OK . 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Click OK , then Close . Expanding the volume size is finished . Deleting V olumes T o delete an existing volume , follow the pr ocedure below . Note: Deleting a volume will erase all dat[...]

79 3 Select the volume to delete and click Delete V olume . 4 Confirm that the volume is c orrectly selec ted on the scr een and click OK . 5 The "Confirm Opera tion" screen will open. Enter the c onfirmation number , then click OK . 6 Click OK . 7 Click Close . Deleting the volume is finished.[...]

80 Hard Driv e Replacemen t Hard drives in the T eraStation show a blue status LED during normal operation. If a drive fails, its error LED will glow red. ± ² 1 Error LED Glows red if a driv e has failed. 2 Status LEDs The failed drive's status LED will be glowing a st eady red. A drive with a r ed status LED is ready to hot -swap. Notes: ?[...]

81 • Do not change the order of the hard drives in the T eraStation. F or example, pulling out drive 1 and r eplacing it with drive 2 may cause data to be c orrupted or lost. • If the L CD display does not change after a new drive is installed, click Redisc over Disk in Settings. Hard Driv e Replacemen t Examples Drive Replac ement (using[...]

82 3 Pull out the drive cartridge and remove it fr om the T eraStation. 4 Inser t the new drive into the empty slot. Slide the drive in with the locking mechanism open.[...]

83 5 Swing the lock back down until it clicks int o place. 6 Close the front co ver . 7 When the replacement har d drive is recog nized, the status LED will flash r ed and the I31 message will be displayed on the L CD panel. 8 Hold down the function button on the front of the T eraStation for 3 seconds until it beeps. F or RAID 1, 5, or 6: The T er[...]

84 F or JBOD: The drive will be f ormatted as an individual drive. Cr eate a shared f older on the drive befor e use. Drive Replac ement (using a redundant RAID mode such as RAID 1, 5, or 6 with auto- shutdown enabled) This section describes the process of replacing a drive while the T eraStation is off . 1 Open the front co ver with the key . 2 Pu[...]

85 6 Unlock the failed drive by pushing the unlock button and swing ing the lock mechanism out. 7 Pull out the hard driv e car tridge and remo ve it from the T eraStation. 8 Inser t the new hard drive (sold separa tely) into the empty slot. Slide the drive in with the locking mechanism open. Swing the lock back down until it clicks int o place. 9 C[...]

86 Chapter 5 Backup Back Up from the T eraSta tion Y ou can back up T eraStation folders to: • A different folder on the T eraStation • Another LinkStation on the network • Another T eraStation on the network Y ou can also configure backup jobs from Easy A dmin. Pr eparing a Backup Destination F irst, configure a f older as a backup [...]

87 2 Click to the right of "Backup" . 3 Click List of LinkStations and T eraStations .[...]

88 4 Click Add under "O ff-subnet Devices" , enter the IP address of the target LinkStation or T eraStation, and click Close . If your setup meets the requirements belo w , you don't have to c onfigure these settings: • The source and target T eraStations are on the same network. • No backup password is set for the target T[...]

89 3 Click Create New Job . Note: Up to 8 backup jobs can be configured .[...]

90 4 Select backup settings such as date and time to run. The follo wing types of backup jobs may be selected: T ype F iles included Normal backup All files in the source will be backed up to the destina tion. Y ou can specify how many backup v ersions to keep from 1–400, or select "Unlimited" to keep all backups until the drive is full[...]

91 T ype F iles included Management backup Each time a backup is executed , management information is stor ed, and only files that have changed ar e copied or deleted. Da ta is retrieved from the previous backup file for files that w ere not changed. This is useful for making backups with limited space or for ref erencing status at a particular poi[...]

92 9 Select the backup target and click OK . Note: Backup targets may include "(LAN1)" or "(LAN2)" , indicating which LAN port will be used for the backup job. 10 Click OK . T asks added to "Backup List" are displayed . 11 Click Close . Replication Replication copies all data from a shar e to a share on a diff erent T [...]

93 2 Click to the right of "F older Setup" . 3 Choose the folder to set as a r eplication destination. 4 Click Edit . 5 Under "LAN Pr otocol Support" , check "Backup" and click OK . Note: Do not configure a backup passwor d for the shared f olders. F olders with a backup passwor d set cannot be selected as replication [...]

94 4 Click Add . 5 Click Browse under "Replication Source" . 6 Select the shared folder that will be the replication sour ce, then click OK . 7 Click Browse under "Replication T arget" .[...]

95 8 Select the shared folder that will be the replication tar get, then click OK . Note: Replication targets may include "(LAN1)" or "(LAN2)" , indicating which LAN port will be used for the replication task. 9 Click OK . 10 Click Ye s . Notes: • A maximum of 64 shared folders can be c onfigured for r eplication. • Re[...]

96 • If a network problem causes a replication error , unsynced data may be shown as "0" ev en though replication is incomplete. Click Resync t o recov er from the replication err or . All files from the source folder will be copied to the target f older . F ailov er With failov er , t wo T eraStations are connected to the network fo[...]

97 Connecting to the networ k at LAN por t 1 and setting failov er at LAN por t 1 With the first setup , if the main T eraStation fails, the backup T eraStation will replace it completely , using the same name and IP address. The backup T eraStation is updated o ver normal network traffic. Connecting to the networ k at LAN por t 1 and setting failo[...]

98 Usage Restrictions F unction Restric tions F ailov er is not available when any of the f ollowing functions are enabled: Replication, sleep mode, encrypted disk volume, MySQL server , media cartridge, L VM volume, iSCSI volume , por t trunking, cloud storage, surveillance server , hot spare, access restrictions by Active Dir ector y or NT domain[...]

99 4 Select a T eraStation to be the target backup device . Note: The target T eraStation's hostname, IP addr ess, and LAN port number will be shown. The LAN port selec ted here will be used to check the main T eraStation for continued operation. 5 Enter the administrator passw ord of the target backup device , then click Continue . 6 If the a[...]

100 Ser vice IP A ddress The "service IP address" will be the new address of the backup T eraStation when it takes over operation fr om the main T eraStation. If no ser vice IP address is set, or a fix ed IP address is set, an attempt is made to inherit the IP address from the main T eraStation. When the Main T eraSta tion F ails Backup T[...]

101 2 Move the AFP switch to the position to enable AFP . 3 Click to the right of "F older Setup" . 4 Choose a shared folder as y our backup destination for Time Machine. 5 Click Edit . 6 Under "LAN Pr otocol Support" , check " AFP (M ac)" and click OK . 7 Click OK . 8 Click Close . 9 Click Backup . 10 Click to the rig[...]

102 13 Selec t the shared f older that you set in the pr evious step, then click OK . 14 Click OK . 15 Click OK . 16 Move the Time Machine switch t o the position to enable Time Machine. 17 On the Mac, open System Pr eferences .[...]

103 18 Click Time Machine .[...]

104 19 Click Select Backup D isk . 20 Selec t the T eraStation, then click Use Disk .[...]

105 21 Enter a username and password with the rights to ac cess the shared f older of the T eraStation, then click Connect . Note: If access restrictions are not configur ed on the target share, log in with the administr ator account . The default username and password f or the administrator accoun t are "admin" and "passwor d" [...]

106 These devic es are supported: • USB mass storage devices • Card readers (ex cept for card r eaders that can recog nize two or more memory cards) • Digital cameras and other PTP devices • UPS devices that are specifically indicated as compatible • USB printers These devic es are not supported: • USB hubs • M ic[...]

107 Chapter 6 Remot e A c cess W ebA cc ess W ebAccess is a software pr ogram for ac cessing the files in the shared folder of y our T eraStation from your computer or mobile devices through the Internet. Be careful when configuring W ebAcc ess. C ertain settings c an make the files in the shared folder a vailable to an yone on the Internet , witho[...]

108 4 Configure the desir ed settings, then click OK . • Y ou may use the default BuffaloNAS.com registration, or disable to use a diff erent DNS server . • Choose a "BuffaloNAS.com Name" and "BuffaloNAS.com Key" f or your W ebAc cess account. Names and keys may use 3 to 20 alphanumeric characters, undersc ores (_), an[...]

109 Notes: • The follo wing levels of security are available: " Allow Anonymous" - An yone can access (view) shar ed folders. " Allow All Groups and Users" - All gr oups and users register ed on the LinkStation or T eraSta tion can use W ebAccess . "Use Inherited F older Permissions" - Users and g roups hav e the [...]

110 4 F rom T arget Folder , select the shared f older that will be connected. Note: The selected folder is used int ernally by "WebA ccess Remote" . Files ar e not added to this folder and the amount of used space does not increase . 5 Y ou may choose to ent er a BuffaloNAS.com name or an external DNS/IP address. If using a BuffaloNAS.co[...]

111 1 TB of files to the WebAc cess Remote target folder , it is recommended to keep at least 2 TB of free spac e available. FTP By default, the T eraStation's shares are only acc essible by users connected to the same network or router as the T eraStation. The optional FTP ser ver allows users outside the local network to ac cess the T eraSta[...]

112 Ac cessing the T eraStation with an Anon ymous User * • T o allow anonymous access to y our FTP share, disable acc ess restrictions. • T o access the T eraStation via anonymous FTP , configure your FTP client software with the following settings: Hostname: IP address of the T eraSta tion Username: anonymous P assword: an y character s[...]

113 3 Click Add . 4 Select the ser vice name from the drop-down menu. Enter the bucket name, ac cess key ID , and secret acc ess key; selec t the storage class and the connection protoc ol, then click OK . 5 Enter a shared f older name to use with the cloud storage service and click OK .[...]

114 6 Under "LAN Pr otocol Support" , check "Backup" and enter the desired shar ed folder settings. Click OK . 7 Click OK . 8 Click Close . Uploading F iles to Cloud St orage T o upload files to cloud storage , using backup job is recommended. 1 In Settings, click Backup . 2 Click to the right of "Backup" .[...]

115 3 Click Create New Job .[...]

116 4 Select backup settings such as date and time to run. 5 Click Add . 6 Click Browse under "Backup Source F older Name" .[...]

117 7 Select the shared folder that uploaded files will be sav ed to, then click OK . 8 Click Browse under "Backup T arget F older Name" . 9 Select the shared folder created fr om the "Configuring Cloud Stor age" section above, then click OK . 10 Click OK . T asks added to "Backup List" are displayed . 11 Click Close .[...]

118 • If using the cloud storage through a pro xy ser ver , click Proxy Settings . In the displayed page, enter the pr oxy server name, por t number , username, and password . Ask your network administrator f or detailed pro xy server settings. • T o use after the network was temporarily disconnected, click Reconnect . • If a file is[...]

119 Chapter 7 BitT orren t BitT orrent is a protoc ol for distributing large amounts of data efficien tly . The inf ormation in this chapter is for users who are familiar with BitT orrent. Note: Use compatibility mode to use the do wnload manager with Window s 8.1 and Window s 8. 1 In Settings, click Applications . 2 Click to the right of "Bit[...]

120 5 Select the shared folder where the downloaded file will be sa ved, then click OK . 6 Click OK . 7 Move the BitT orrent switch to the position to enable BitT orrent. 8 Click to the right of "BitT or rent" .[...]

121 9 Click Open Download Manager . The default username is "admin" and the default passwor d is blank (no password). 10 The download manager will open.[...]

122 Chapter 8 Multimedia DLNA DLNA is a set of guidelines for sharing digital media. The T eraStation includes a DLNA server compliant with the DLNA guidelines. The movies, photos, and music sa ved on this product can be played back on DLNA-compliant T Vs, stereo equipment, game c onsoles, and other devices within the network. 1 In Settings, click [...]

123 8 Click to the right of "DLNA Ser ver" . 9 Click Edit . 10 Selec t an interval for DLNA server database updates and click OK . 11 Click OK . Playing F iles T o play back conten t from a DLNA-compatible device: 1 Connect the DLNA-compatible device to the same network as the T eraStation and turn it on. 2 Select the T eraStation in the [...]

124 1 In Settings, click Ser vices . 2 Click to the right of "DLNA Ser ver" . 3 Click DLNA Client Acc ess Permissions . 4 A list of the MAC addr esses, IP addresses , and device names of the DLNA-compatible devices connected to the same network as the T eraStation is displayed. If your device is not list ed, click Refresh Database . Strea[...]

125 1 In Settings, click Ser vices . 2 Click to the right of "DLNA Ser ver" , then click Edit . 3 Y ou may change the update int er val, or select Refresh Database to update the da tabase immediately . Disabling Playback fr om Specific Devices Y ou may block specific DLNA devices fr om playing back media content. 1 In Settings, click Ser [...]

126 4 Uncheck the devices you do not want t o allow to play media and click OK . Suppor ted F ile T ypes The T eraStation suppor ts DLNA streaming of files with the extensions below . T ypes F ile Extensions Video files .avi, .divx, .asf , .mpg, .mpe , .m1v , .vob , .mts , .m2ts, .m2t, .mpeg, .mpeg2, .v dr , .spts, .tp, .ts , .3gp, .mov , .m4v , .w[...]

127 3 Click Edit . 4 Click Browse . 5 Select the shared folder that you wan t to make available to iT unes, then click OK .[...]

128 6 Click OK , then OK again. 7 Move the iT unes ser ver switch to the position. Squeezebo x Ser v er Squeezebox is a network music play er by Logit ech that can play back music stor ed on your network using your wired or wireless LAN without a c omputer . S queezebo x supports mp3, flac, ogg, he -aac v2 and wma. Configur ation 1 In Settings, cli[...]

129 5 Click Browse . 6 Select the shared folder that you wan t to make available to Squeezebo x, then click OK . 7 Enter port number (9001 is recommended), then click OK . 8 Click OK .[...]

130 9 Click Open Squeezebox . The Squeezebox's settings will open.[...]

131 Chapter 9 Surveillanc e Ser ver The T eraStation suppor ts streaming video fr om RTSP (Real Time Str eaming Prot ocol) network cameras. Getting Star ted The follo wing items are requir ed: • T eraStation with sur veillance camera support • Suppor ted network camera • Ethernet cable • Ethernet hub • Computer Supported op[...]

132 Installing Client T ools Download "Buffalo Surveillance Camera Client T ools Setup" fr om the Buffalo website and install the f ollowing client tools using the install wizard on y our computer . Camera P olicies - Registers that a netw ork camera is connected and ready to rec ord. Live V iew er - Lets you view video as it is being r e[...]

133 2 Click to the right of "Surveillance Cameras" . 3 Click Edit . 4 F rom "LAN P or t" , select the LAN por t connected to the same network as the network camera and computer where the client tools ar e installed. 5 Click Browse . 6 Choose a folder f or recorded video , then click OK . Note: Use a f older with at least 100 GB [...]

134 9 Move the surveillance camera switch to the position. Notes: • If the target shared folder specified as the st orage location for r ecorded video is deleted , the sur veillance camera is automatically disabled. • Do not directly edit recorded video data in the shar ed storage folder . I f a file is directly edited, the surveillance c[...]

135 4 Open the License tab , then click Activat e Free Lic ense . T o deactivate the license, click .[...]

136 5 Make sure that "SurveillanceCamera" and "Har dDisk" were added t o "Installed Licenses" . The free license is no w enabled. Registering Rec ording P olicies Register the network camera that is used. 1 Click Star t - BUFF ALO - B UFF AL O Surveillance Ser ver - Camer a Policies . F or Windo ws 8.1 and Windo ws 8, [...]

137 3 Click Next . 4 Click Find C ameras .[...]

138 5 Select the detec ted network camera, then click OK . Note: Network cameras that are alr eady in use are indicated b y an asterisk (*) and are gra yed out. 6 Enter the username and passwor d if they are configured , then click Next . Note: Clicking T est Camer a runs an operational check on the network camera. 7 Enter the description, then cli[...]

139 8 Select the recording schedule, then click Next . 9 Select the T eraStation where the video will be rec orded, then click Next .[...]

140 10 Check the registration inf ormation; if it is correct, click Next . 11 Click Next . An additional network camera can be regist ered by selecting "Y es" when asked "Do you want to add an additional camera?"[...]

141 12 Click Finish . 13 Click Sa ve . Recording will begin. Y ou' ve no w register ed the recording policy of the network camera. Checking Recording T o check that recor ding is working correctly, f ollow the proc edure below . W ait at least 15 minutes after r egistering the recor ding policy before checking the recording. 1 Click Star t - B[...]

142 V iewing Sav ed V ideo F ollow the procedur e below to view rec orded data sav ed in the T eraStation. 1 Click Star t - BUFF ALO - B UFF AL O Surveillance Ser ver - Surveillance Video Manager . F or Windo ws 8.1 and Windo ws 8, click Surveillance Video Manager in the Start menu. 2 Click Search . 3 Video clips ar e shown in the search results at[...]

143 2 Select the search criteria on the left side of the search screen, then click Search .[...]

144 3 The search r esults are displayed . Click a thumbnail to start the media viewer .[...]

145 4 Select the sec tion to export and click Expor t . This will r egister the video to the export queue. 5 Open the Export screen, register the export information from "Export Job Configuration" , and click "Star t Export" . The video is exported in MOV format. This completes exporting video in the MOV format. V iewing V ideo [...]

146 2 Registered network cameras ar e listed in the "Cameras" f older on the right side of the screen. T o view a video that is currently being rec orded, double- click the camera whose video you w ant to view or drag to a frame of the camera viewer on the left side of the screen. This completes viewing curren t video. Moving Rec orded V [...]

147 3 Click the Source tab . Under "Vault" , select the T eraStation where the rec orded video data is sav ed. Select " Any" to migrat e recorded data on all netw ork-connec ted T eraStations. 4 Click the Destination tab to select which T eraStation you want t o move the data fr om "Vault" off of . 5 Set the migration [...]

148 3 Click the Source tab and select the T eraStation where the r ecorded video data is sa ved under "Vault" . Note: If "any" is selected, rec orded data for all T eraStations connected to the network will be backed up. Click the Destination tab, then select the T eraStation where you want to mo ve the data from "V ault&qu[...]

149 3 Click the Source tab and select the T eraStation on which rec orded video is saved under "V ault" . 4 Open the Criteria tab; under "Miscellaneous Options" , set " W atermark: High" and "Watermark: Low" options . This determines the used space thr eshold. F or example, if you set Wat ermark: H igh to &qu[...]

150 Changing Where Rec orded V ideo Is Sav ed F ollow this procedur e to change the T eraStation to which video is saved . 1 Click Star t - BUFF ALO - B UFF AL O Surveillance Ser ver - Camer a Policies . F or Windo ws 8.1 and Windo ws 8, click Camera P olicies in the Start menu. 2 Click the icon on the tool bar and open the "Camer a Configurat[...]

151 Client T o ols Camer a P olicies Camera P olicies is utility software that registers the network cameras and starts video recording . Click to start a wizard to register network cameras and schedule r ecording . Click to open the camera configura tion screen where network cameras ar e register ed. Click to start a new registration scr een for a[...]

152 Note: T o view the cur rent video , the network camera must be r egistered in Camer a Policies . • The layout of the camer a view (numbers of rows and c olumns) and register ed network cameras are displayed in the panel on the right side of the screen. • The camera view (live video) is displa yed on the left side panel. In the default[...]

153 Policy T ype Action Purge Deletes the recor ded video data. The right side of the screen includes tools f or creating and updating da ta ser vice policies. The left side of the screen shows an ov er view of all data service policies. Notes: • If is displayed f or a policy in the lef t-side frame , the policy is disabled. • Surveillanc[...]

154 Icon Description Loads a media device . Pr epares a media device. Unloads a media device. Erases a media device. Refreshes the current scr een. Sur v eillance V ideo Manager Surveillance Video Manager is utility software for per forming sear ches and exporting recorded video data. Search W indow[...]

155 Export Window Networ k Activity Network Activity is utility sof tware that display s the T eraStations on which surveillance cameras are opera ting on the network in real time and in graphical f orm. All clients and T eraStations located on the network are indicated b y and labels. These can be moved by dragging and dropping them. Clients ar e [...]

156 Mini V ault Stats Double -click ing the icon f or a T eraStation on "Network Activity" starts "M ini V ault Stats" . "Mini V ault Stats" shows the network traffic in graphical f orm. A c tiva ting Additional Lic enses Pur chasing an additional license (sold separately) enables you t o connect and use two or more ca[...]

157 3 Open the License tab , then click + . If your default free license activation is not installed, see the "Enabling the F ree Lic ense" section to install it. 4 Enter the product key for the lic ense pack (sold separately), then click OK .[...]

158 5 Confirm that the new license was added t o "Installed License" . Y ou have no w activated the additional license. T eraSta tion Not C onnected to the Internet 1 If the T eraStation is being used in an envir onment where Internet access is not a vailable, a separat e computer with access to the Internet is requir ed to activate the a[...]

159 3 Select the T eraStation where you w ant to add the license, right -click it, and click Proper ties . 4 Open the License tab , then make a note of the "Host Id" . 5 Open the website in w eb browser: http://buffalo .jp/support_s/camera_licence/.[...]

160 6 F rom the license pack (sold separately), en ter the product key and host ID code and click " Activate Software License" . 7 Downloading of the license file (*.lic) begins . Save the license file to a USB memory drive or other storage device. 8 Copy the license file t o a computer connected to the same network as the T eraStation. 9[...]

161 11 Open the License tab , then click + . 12 Selec t "Import license file" , then click Browse . 13 Selec t the license file that w as saved befor e, then click OK .[...]

162 14 Check that the license pack was added to "Installed Licenses" . This completes authentica tion of an additional license. T roubleshooting Issue Possible C ause P ossible Solution Video r ecording does not start. Surveillance Camera setting not enabled. Enable surveillance camera in Settings. A LAN cable between the T eraStation and[...]

163 Issue Possible C ause P ossible Solution I cannot enable the surveillance camera. F ailov er is running. Disable failover . Surveillance cameras no longer recor d video. The target shared f older for the recor ded video was deleted. Enable surveillance camera functionality in S ettings. I cannot view the network camera using Live V iewer . The [...]

164 Chapter 10 A dvanced F eatures Antivir us Sof tware T rend Micro NAS Security™ can protect your network and data fr om soft war e viruses, malware , and spyware. T o use T rend Micro NAS software , purchase an OP- TSVC license pack (sold separately). If your T eraStation includes activated antivirus software, no license r egistration is neces[...]

165 2 Enter the serial number from the "T rend Micro NAS Security TM License P ack Guide" , included in your pack age. Click Activat e . The new license is now r egistered . T o check the status of the current license , open the T rend M icro NAS Security settings page and navigate t o Administr ation - Product License on the left-side me[...]

166 3 Click Options . 4 Enter your username and passw ord, then click Log O n . Y ou can log on with the T eraStation's admin account. The default username and password are "admin " and "password" . 5 T rend Micro NAS Security settings will open. Note: The T rend Micro NAS Security settings page is compatible with IE 6.0 SP[...]

167 1 F rom the left-side menu, click Administr ation - Pro xy S ettings . 2 Check "Use a pro xy ser ver to access the Internet (Lic ense update)" . Enter the IP address and port of the proxy server , then click Save . The antivirus software is now configur ed to use a pro xy ser ver . Updating F or best results, c onfigure your antivirus[...]

168 2 Check "Enable Scheduled Update" . 3 Select a time for updates to begin, an int er val for upda tes, and an amount of time f or updates to continue . Select the components to update. Click Save . The antivirus software is now configur ed to update automatically a t the scheduled time. Updates will not be downloaded if the T eraStatio[...]

169 Real-time Scan The virus scan runs in the background , scanning every file that you read or write. This is the default type of scanning. Y our T eraStation may run slower if r eal-time scanning is enabled. Scheduled Scan A scheduled scan is executed a t specific regular intervals, such as every T uesday at 3 am. Manual Scan A manual scan runs o[...]

170 1 F rom the left-side menu, choose "Logs" . 2 Click the log item that you wan t to check. 3 Click Display Log . This completes the pr ocedure f or checking the log. Online Help F or more information on the an tivirus soft war e, ref er to the online help . Follo w the procedur e below to access the online help.[...]

171 1 F rom the right-top menu, choose Help - C ontents and Index . 2 Online help will open. Online help is now ready to use . Email Notification Y our T eraStation can send you email reports daily , or when settings are changed or an error occurs . Notification emails may be triggered by an y of the following ev ents: • Scheduled hard drive s[...]

172 5 Enter your mail server settings and choose which events will trigger notifications . Click OK to send a test email. Sleep Mode T o save energy , you can specify times to put the T eraStation into sleep (standby) mode, during which the har d drive and LEDs are turned off . 1 In Settings, click Management . 2 Click to the right of "Sleep T[...]

173 4 Specify the timer interval, wake-up time, and time to go into sleep mode, then click OK . Notes: • Up to three timers can be set. • The time to enter sleep mode can be set fr om 0:00 am to 3:45 of the next day . The time to wake fr om sleep mode can be set from 0:00 to 23:45. If the time to enter sleep mode is after 24:00, the wake-[...]

174 On days other than Wednesday , normal operation begins at 9:00 and the unit goes into sleep mode at 18:00. On W ednesday , nor mal operation beg ins at 10:00 and the unit goes into sleep mode at 1:00 am of the next d a y. Example 4: When running at a current time of 10:00 Wednesday Timer 1: Daily 9:00–18:00 Timer 2: W ednesday 7:30–22:00 Ti[...]

175 • On the local network, W ake - on-LAN packets may be sent t o por t 2304 on either of the T eraStation's LAN ports. If the T eraStation is connected to a Buffalo wireless r outer configured f or remote access , then it may be turned on from outside the local network (from the W AN side). T o use this feature, connect the rout er to o[...]

176 8 Configure the desir ed settings, then OK . Notes: • If the T eraStation is connected directly to a UPS, select "Sync with UPS connected to this T eraSta tion" . I f a differen t T eraStation is connected to the UPS, select "Sync with UPS connected to another LinkStation or T eraStation on the same network" . After mak[...]

177 T runking Mode Characteristics TLB The outgoing network packet traffic is distributed acc ording to the current load (relativ e to the speed) on each network interface slave . *A separate intelligen t switch that supports EtherChannel or other por t trunking is required. Configur e two LAN ports on the switch for por t trunking first. **A separ[...]

178 7 Reboot the T eraStation bef ore use. C onnec ting a P rinter Y ou can connect a printer to the USB port on the T eraStation. Notes: • Only one USB printer can be connected to the T eraSta tion. • Bidirectional communication is not supported i.e., remaining ink quantities and other printer sta tus information is not display ed. •?[...]

179 7 Select your printer , then click OK . 8 Register the printer . Setting Up a Printer with Windo w s XP 1 In Settings, click Ser vices . 2 Move the print server switch to the position to enable the print ser ver . 3 Refer to the manual supplied with the printer . 4 Click Star t - Control P anel . 5 Click Network and Internet Connections . 6 Cli[...]

180 9 Register the printer . T er aSearch T eraSearch lets you sear ch for character strings contained in files (text files, Word files , etc.) stor ed on the T eraStation. F ollow the steps below to enable it . 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click the shared folder t o be indexed. 4 Click [...]

181 11 Click Refresh Index 12 Click Edit . 13 Enter the port number that you want to use and the time that the index will be updated , then click OK . 14 Open the following URL in your br owser . http://(IP address of your T eraStation):3000/ Note: Y ou can identify your IP address from NAS Naviga tor2. 15 Enter your T eraStation's username an[...]

182 1 In Settings, click File Sharing . 2 Click to the right of "F older Setup" . 3 Click the shared folder f or offline files. 4 Click Edit . 5 Choose "Manual File C aching" , " Aut omatic F ile Caching" , or " Aut omatic Pr ogram and F ile Caching" , then click OK . Note: • "Manual F ile Caching&q[...]

183 9 Check "Enable Offline Files" , then click OK . Note: Offline files cannot be enabled if "Use F ast User Swit ching" is enabled. T o change the setting, open "User Accoun ts" in Control P anel and select "Change the way users log on or off " . 10 Right- click the icon of the shar ed folder on the T eraSt[...]

184 (2) Navigate to Start - All Progr ams - Accessories - S ync Center and click Sync All t o synchronize all offline files. (3) Disconnect the computer from the network and verify that y ou can access offline files. DFS DFS (Distributed F ile System) is a set of client and server services that allows Windo ws users to organize man y distributed SM[...]

185 If enabled, a DFS link target shared f older is created under the DFS r oot. If disabled, up to 8 DFS link target shared folders can be cr eated under the DFS root. 5 Enter DFS Root F older Name . 6 Click Add Link . 7 Enter the link name, hostname , and shared folder name , then click OK . 8 Click OK . 9 Move the DFS switch to the position to e[...]

186 A cc essing from an NFS Clien t Note: (US purchasers only) Buffalo 's customer support will help configure the NFS settings on your T eraStation, and will support VMware and Windows clients but will not pro vide suppor t f or configuring your Linux or other UNIX clients. There are many types of UNIX and the proc edures for c onfiguring NFS[...]

187 10 Click Add Client . 11 Enter the IP address and hostname of the NFS client, then click OK . Note: T o delete a client, check the hostname and click Delete Client . 12 Click Close . 13 Enter the mount command to acc ess the shared folder fr om the NFS client. The mount command depends on y our operating system. The examples below assume that I[...]

188 mount -t nfs 192.168.11.10:/mnt/arra y1/share /mnt/nas F or Windo ws Service for Unix 3.5: mount 192.168.11.10:/mnt/array1/shar e z: F or Solaris 10: mount -F nfs 192.168.11.10:/mnt/arra y1/share /mnt/nas Notes: • T o configure access r estrictions by IP address, click Services - Edit , then enter the desired settings . • T o use shar[...]

189 SSL K ey s SSL keys are used during setup screen oper ations and FTP communication. SSL (Secure Socket Layer) is a type of encryption system called public key encr yption. Generally , SSL is managed by the two files below . server .cr t (SSL Certificates) The T eraStation sends the file to a computer , and the computer uses it to perform encr y[...]

190 4 Click Edit . Note: The settings of the PHP language interpr eter can be changed from "Edit php .ini" . 5 Click Browse .[...]

191 6 Choose a shared folder f or the web server , then click OK . 7 Choose an external por t, then click OK . MySQL Ser ver The T eraStation can be used as a MySQL ser ver . A MySQL database may be installed and linked with the web server . 1 In Settings, click Ser vices 2 Move the MySQL server switch to the position to enable the MySQL ser ver . [...]

192 5 Click Browse . 6 Choose a shared folder f or the MySQL ser ver , then click OK . 7 Choose an external por t, then click OK . SNMP If SNMP is enabled, you can bro wse your T eraSta tion from SNMP-compatible network management software. The specific MIB (management information base) file f or Buffalo is available from the Buffalo w ebsite. 1 In[...]

193 2 Move the SNMP switch to the position to enable SNMP . 3 Click to the right of "SNMP" . 4 Click Edit . 5 Configure the desir ed settings, then click OK . Saving and Applying Settings The T eraStation's settings can be saved t o a USB memor y device and r estored to another T eraStation of the same series. Use this function to ba[...]

194 • The USB memory device should have a capacity of at least 1 GB. • Any data st ored on the USB memory device will be deleted. 2 In Settings, click Management . 3 Click to the right of "Restore/Erase" . 4 F rom "T arget USB drive" , select the USB memor y device that is connected to the USB 2.0 port of the T eraStat[...]

195 3 Click to the right of "Restore/Erase" . 4 F rom "T arget USB drive" , select the USB memor y device that is connected to the USB 2.0 port of the T eraStation. 5 Select " T ransf er settings from a USB drive" , then click Execute . Restoring F ac tor y Defaults Initializing from Settings T o initialize the T eraSt[...]

196 Crea ting an Initialization Driv e A system initialization drive will r estore the settings on y our T eraStation to their factory defaults. Y ou can initialize them without logging in to Settings. F ollow the st eps below to creat e a system initialization drive . Notes: • Normally , making and using the system initialization drive will n[...]

197 Resetting the A dministra tor P assw ord Crea ting a P asswor d Reset Drive A password initialization driv e can reset the administrator passw ord to its default value ("passw ord"). This could be very useful if you forget y our admin password. 1 Connect a 1 GB or larger USB memory device (not included) to a USB 2.0 por t on the T era[...]

198 2 Click to the right of "Logs" . 3 Click Edit . 4 Select a log to view . The file operation log stor es file operations performed on the internal hard drives. F ile operations on USB drives are not logged . Note: All logs are enc oded in UTF-8 format. T o show them c orrectly , change the soft war e encoding to "UTF-8" . T o[...]

199 Under the selected shared folder , a folder named "system_log" will no w contain the logs. Updating the F irm w are If a new firmware is av ailable, a message is displayed when the T eraStation boots. Y ou can update the firmware by following wa ys: Notes: • Updating version 2.40 or earlier firmwar e to 2.60 will overwrite your c[...]

200 3 Click Update Settings . 4 Select "Update the firmware automatically" and click OK . Alternately , you may choose to schedule updates f or a specific time of day . Name , Date , T ime, and Language Configure the T eraStation's hostname, dat e, time, and language as shown belo w . Note: If the T eraStation is being used as an iSC[...]

201 3 Click Edit . 4 Click the Name tab, then c onfigure the T eraStation's name and description. 5 Click the Time tab . Click Use L ocal Date/Time to use your c omputer's time settings for the T eraStation. By default, the T eraStation adjusts its clock automatically by using a default NTP server . This NTP server belongs to Internet Mul[...]

202 If an NTP ser ver is specified by name inst ead of IP address, make sure tha t a DNS ser ver is c onfigured for the T eraStation. Note: The internal clocks of the T eraStation and other devices on your network may run at slightly diff erent speeds. Over a long period of time your network devices may sho w somewhat differ ent times, which can ca[...]

203 Note: This tab changes the language used by the T eraStation for email notifications, DLNA, and other functions. T o change the language displayed in Settings, go t o Advanced Settings or Easy Admin and click L anguage in the menu bar . Choose your desired language from the drop-down menu. Beep Aler ts Y ou can set the T eraStation to beep when[...]

204 1 In Settings, click Management . 2 Click to the right of "Notifications" . 3 Click Edit . 4 Click Fr ont Panel Display Settings . 5 Configure y our settings, then click OK . Jumbo F rames If your other network devices support it, you may be able to increase network performance with jumbo frames. 1 In Settings, click Network .[...]

205 2 Click to the right of "IP Addr ess" . 3 Click the LAN port where the jumbo frames will be used. 4 Select the desired Ethernet frame size and click OK .[...]

206 Note: Make sure the T eraSta tion's Ethernet frame size is smaller than the hub or rout er's. Larger frame siz es may not transfer the data t o the T eraStation corr ectly. Changing the IP A ddress Normally , the T eraStation's IP address is set automatically fr om a DHCP ser ver on y our network. I f you pr efer , you can set it[...]

207 4 Disable "DHCP" and enter the desired network addr ess settings, then click OK . Notes: • Do not set the same address for LAN port 1 and LAN por t 2. This may cause unstable network communication. • Use LAN port 1 to access differen t network subnets from the T eraStation. Access to a diff erent network subnet is not possib[...]

208 Chapter 11 Utilities NAS Naviga tor2 f or W indow s NAS Navigator2 is a utility prog ram that makes it easy to display Settings, change the T eraStation's IP address, or check its hard drive . If you installed the T eraStation with the T eraNavigator CD , NAS Navigator2 was installed automatically . Double -click the icon to start NAS Navi[...]

209 Name Description Menu Map Share * Assigns the T eraStation's shared folder as a network drive . Disconnect Share * Unmaps the network drive. Map All Remote Shares to Drive Lett ers Assigns all the T eraStation's shared folders as network drives. Create Desktop Shortcut * Creates a shortcut to the T eraStation's shared folder (sha[...]

210 Name Description Refresh Refreshes list of NAS devices. Browse Shar es Displays NAS Naviga tor2 window . Exit Exits NAS Navigator2. The follo wing tasks may be per formed fr om the T eraStation's properties page. Name Description Configuration Click Settings to open the configuration interface. IP Address Check Use DHCP to assign an IP add[...]

211 2 Right-click on the T eraStation's icon, then click Map Share . 3 An icon for the mapped shar e will appear in Computer or My Comput er . Y ou can use this network drive just like any other hard driv e. Changing the IP A ddress 1 Double -click the icon to start NAS Navigator2. 2 Right-click on your T eraStation's icon and choose P ro[...]

212 3 Uncheck "Use DHCP" and enter the desir ed settings, then click OK . If the username and password prompt appears, enter the admin username and passw ord. Note: The f ollowing IP addresses are r eser ved and should not be used . If you configure one of them by ac cident, initialize all settings by ref erring to the "Restoring F a[...]

213 If you installed the T eraStation with the T eraNavigator CD , NAS Navigator2 was installed automatically . T o launch it, click the icon in the Dock. Click on a T eraStation's icon to display: • T otal capacit y • Used capacity • Workgr oup • IP address • Subnet mask • Default gateway • MAC address •?[...]

214 Mount as Netw ork Drive Y ou can map a shared f older as a network drive using NAS Navigator2 on Mac OS. 1 Click the icon in the Dock to start NAS Navigator2. 2 Double -click the T eraStation icon or click the T eraStation icon while holding down the control key , then selec t Open Folder . Ent er a username and password with the rights to ac c[...]

215 3 Uncheck "Use DHCP"; enter the desir ed settings and the administrator passwor d, then click Apply . Note: The f ollowing IP addresses are r eser ved and should not be used . If you configure one of them by ac cident, initialize all settings by ref erring to the "Restoring F actory Defaults" sec tion in chapter 10. Local lo[...]

216 F or Windo ws 8.1 and Windo ws 8, click iSCSI Connection T ool . Home Screen Name Description T arget If a T eraStation is selected, clicking Register iSCSI Device will register all the volumes in the T eraSta tion to the computer f or enabling connection to individual volumes. If a volume is already reg istered, click Unr egister iSCSI Device [...]

217 Name Description User authorization - Disabled:No authentication. - Enabled:User authentication is needed to c onnect to a volume. Connect on Start Up If selected, the computer will connect to the volume automatically a t boot. Refresh Search for network devices on the LAN. Exit Exit iSCSI Connection T ool. Menu Name Description F ile Refresh S[...]

218 10 Click Finish . NovaBA CKUP is now installed. T o launch Nov aBACKUP , click the ic on on your computer's desktop . F or more detailed information, click View Help in the No vaBACKUP Express Wizard or click Help T opics at the upper right of the NovaBA CKUP home screen.[...]

219 Chapter 12 A ppendix L CD Display The L CD display can be cycled through diff erent modes b y pressing the display button on the fr ont of the T eraStation. Also , the items display ed can be configured at Management - Notific ations - Fr ont Panel Display Settings in Settings. Modes L CD Message Description Corrective A ction LINK SPEED Note: [...]

220 L CD Message Description Corrective A ction UPS E10 Dependent Mode The T eraStation is running on the UPS battery due to a power outage. The system will now be shut do wn safely . Check that power is being supplied t o the UPS, and if there are no pr oblems, turn on the T eraStation. SYSTEM Error E11 F an F ailure An error occurred in the fan s[...]

221 L CD Message Description Corrective A ction RAID I18 ARRA Y x Rebuilding Rebuilding RAID array x. Note: T ransfer speeds are slower during the rebuilding proc ess. - RAID I19 ARRA Y x 0 Filling Writing 0s to RAID array x, er asing all data. - RAID I20 DISKx F ormatting F ormatting hard drive x. - RAID I21 DISKx Checking Checking hard drive x. -[...]

222 L CD Message Description Corrective A ction Recovery I42 Pr eparing Pr eparing to star t the rec overy process. - Recovery I43 Unsupported HW The T eraStation was started from the USB recov ery device, but the system cannot be recov ered from this USB r ecovery device. - Recovery I44 Disk1 not found Recovery from the USB reco very device was in[...]

223 Shared F olders "share" (for both Windows and Mac computers). The recycle bin is enabled on "share" by default. DHCP Client Normally , the T eraStation will get its IP address automatically from a DHCP server on the network . If no DHCP ser ver is available , then an IP address will be assigned as f ollows: IP Address: 169.2[...]

224 Internal Hard Drive If a hard drive in the T eraStation malfunctions, replace it with a Buffalo drive of the same capacity . Use a Buffalo OP-HDWR series drive f or the TS5200DS, TS5000WR, and TS5000N series, a OP -HDH series drive for the TS5400RH, and a OP-HDS series drive for other TS5000 series T eraSta tions. The driv es listed above ar e [...]

225 Chapter 13 Regula tor y C ompliance Informa tion F or C ustomers in the United Stat es FC C Stat ement This equipment has been tested and f ound to comply with the limits f or a Class A digital device, pursuant t o par t 15 of the FCC Rules . These limits ar e designed to provide r easonable protection against harmful interference when the equi[...]

226 Dies ist ein Pr odukt der Klasse A. I n einer häuslichen Umgebung kann dieses Produkt F unkstörungen verursachen. Um diese zu beheben, müssen ggf . entsprechende Maßnahmen ergriff en werden. V erwenden Sie ausschließlich die K abel und Zubehörteile, die im Lieferumfang en thalten sind. Andere Z ubehör teile oder Kabel dür fen nur dann v[...]

227 Português Este é um produto de Classe A. Num ambien te doméstico , este produto pode pr ovocar interferências de rádio , pelo que o utilizador poderá ter de tomar medidas adequadas . Utilizar apenas cabos e acessórios incluídos na embalagem. Não utilizar outros acessórios ou cabos, salv o se especificamente indicado na documentação [...]

228 F or C ustomers in T aiwan BSMI 警告使用者 : 此為甲類資訊技術設備，於居住環境中使用時，可能會造成射頻擾動，在此種情況下，使用者會被要求採取某 些適當的對策。 F or C ustomers in China CCC 警　告 此为A级产品，在生活环境中，该产品可能会造成无线电干扰。在这?[...]