Cabletron Systems 9060A MP manual

1 IP Kamera 9060A –MP (Mega Pixels) User Guide IP Kamera 9060A-MP Manual version: 1.00 Date: 2006.08[...]

2 Caution: Any changes or modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for FCC and CE. These limits are designed to provide reasonable protection against harmful interference when the equipment i[...]

3 Table of Contents 1. PRODUCT OVERVIEW ............................................................................................... 4 FEATURES ........................................................................................................................ 2. PHYSICAL DESCRIPTION...........................................................[...]

4 1. Product Overview IP Kamera 9060A-MP (Mega Pixels) has a built-in a web server which can transfer video & audio via a data network and monitor your home /office / co mmercial facility form any corner of the world. Adopt latest technology, 9060A-MP (Mega Pixe ls) can take 1600 * 1200 pictures when enable Motion Detection or click SNAPSHOT, u[...]

5 2. Physical Description BOX CONTENT IP Kamera package content ：  1 x IP Kamera 9060A-MP (Mega Pixels)  1X Ceiling mount 1 x RJ 45 internet line  1 xTansformer 5V 1.0A, support 110~240V .  1 x CD  1 x Quick Installation Guide System Requirement  Intel Pentium Ⅲ and above or relevant AMD CPU  Any system can use IE (Internet[...]

6 3. Interface Description Front Panel: 1. Power indicator (LED) 2. Sensor: 1/2 CMOS Rear Panel: 1. Reset ON / OFF ( Left - OFF & Right –ON ) 2. DC Power: 5V, 1.0A 3. Microphone In 4. RJ 45 (Cat5 Network) Notice * Please use Microphone fro Audio In * Reset ON/OFF: please turn to ON for 5-10 seconds and then turn back to OFF to Finish reset: O[...]

7 4. Installation Before installation: Before using IP Kamera 9060A-MP, check as follows.  Confirm your package content  A computer connects with LAN Hardware installation 1. Plug in RJ 45 line to connect 9060A-MP (Mega Pixels) with HUB 2. Connect the HUB into your modem. 3. Connect 9060A-MP (Mega Pixels) power. 4. Turn you computer on 9060A-[...]

8 5. Initialization Set up on Ethernet Click “ipEdit.exe” . Please affirm the power of 9060A-MP (Mega Pixels) had been turn on and the Ethernet connection of RJ45 is correct.[...]

9 A. LOCAL Devices area: IPEDIT will searching all IP Products 9XXXseries in the same local Ethernet, the default name of 9060A-MP (Mega Pixels) is Cam-location, and display the information as select 1. Double click the IP address, it will be covered by dark stripe, its name, and IP will be displayed below. The IP address of IP camera 9060 should i[...]

10 IP 9060A-MP (Mega Pixels) Default static dynamic IP Address is 192.168.0.100. the last digit of IP address (default is 100) can be any number between 1~254, but can not be same as your PC. If using in any PC, just use HUB and type t he 192.168.0.100 in Browser or use “ipedit.exe “ then you can get in the web page. * Same SEGMENT : The first [...]

11 B. Internet online devices: By setting the server address in IP server of advanced setting page, user can easily to get the IP address of IP Kamera 9060A-MP on internet by name searching. The default IP address of IP server is 220.135.169.136. Step1: click “connect” green button Step2: type the keyword in “ device name “[...]

12 Work with Yahoo /MSN Messenger 1. Work with Yahoo /MSN Messenger: We use Y ahoo for instance. Select the friend you would like to send your video. For instance, we pick up Yahoo Helper. 2. Choose T1/E1 when system ask y ou about the Internet connecting speed. 3. Then My WEBCAM will pop up. Please go to “file “  “Preference”  “Cam[...]

13 4. You can type in appointed IP address (No matter Real IP or Dynamic IP) and confirm by click “Add” and choose if reverse the out streaming video. We support: A. Normal B. Flip Vertical C. Flip Horizontal D. Rotate 180 And you can also adjust the color, Brightness, contrast, Hue, Saturation, Sharpness and ETC. Note 1 : for safety issue , as[...]

14 6. WEBPAGE FUNCTIONS When your computer configured IP address, you can finish setting through IE browser. Click the picture in the window of IPEdit directly; you can open the web page of IP9060. Login setting General user: Default general ID is guest, Password is password. Administrator: Default administrator ID is admin , Password is 12345678 .[...]

15 LiveView setting After 5 minutes, you will get the video of 9060A-MP. If system inquire to download ActiveX please select YES / download Most of upside function key (such as Admin istration Update and ETC) can only be used by Administrator. Image Setting Setting windows is on the left; it’s used to set up image parameter. 1. Resolution: User c[...]

16 3. Anti-Flicker: You can get top-quality picture for we had set up the picture condition on the basis of different illumination environment. You can choose environment such as “Out Door”,” indoor 50hz AC illumination” or ” indoor 60hz illumination ”. Note: Please do select “ Outdoor “ when y ou monitor outdoor at daytime or 9060A[...]

17 Advanced quick setting Advanced menu will be display when right cl ick mouse on the image windows, you can set up image, record AVI, record WMV, zoom, motion detect, splits, rotate, set time, and set pictures path. The function can be set in other web page of 9060A-MP[...]

18 1. Image: parameter setting Right click mouse on the motion image, choose “image” can open corresponding windows. Users can adjust Brightness, Contrast, Saturation, Sharpness, Smooth and Awb(Auto White Balance). Click “rotate” will circumrotate the image. Click “reset” will back to default setting. 2. Record AVI: Right click mouse on[...]

19 If select “ For playback on most pocket PCs: record smaller file than select to ““ For local playback” 4. Zoom Right click mouse on the motion image and choose “zoom”. Users use mouse to draw a frame round to select image, let go will be amplificatory to old image, when right click mouse again, the image will revert.[...]

20 5. Motion detect In this page, you can enable Motion detection function and setup the pictures saving direction: in PC / by e-mail / save in Ftp. The r esolution of detect pictures is 1600x 1200. Use this function need to enabled Event of Event Tr igger page first (click submit to save setting after select). Motion Detection can set up the envir[...]

21 5. Splits: split video in to multi screen. 1 / 4 / 9 / 16 6. Rotate: Adjust the pictures: 180 7.Set time: Setup by same as local PC or NTP se rvere. If choo se NTP serve r please sele cts in NTP server default: 131.246.9.116[...]

22 8. Set pictures path: Fast select the direction for SNAP and Motion detection. Network setting This menu can set up or change the assignment of IP CAM network connections. There is three chooses: STATIC, DHCP, and PPPOE. A. STATIC work for both real and dynamic IP address. B. IN DHCP modes, the IP addre ss was appointed by DHCP Server; C. PPPOE [...]

23 A .Set up STATIC mode, steps: The IP address of IP camera 9060A-SL should in t he same subnet with your PC, subnet mask, and default gateway mast same as 9060A-SL also. For example, the default IP addr ess of 9060A-SL is 192.168.0.100, 1.Type the new IP address, Submask, Gate way in the relevant text windows. 2. Press submit key. 3. Press reboot[...]

24 After amend the setting please do cli ck “Submit “to save the setting. B. Set up DHCP mode, steps: 1.Click DHCP, and then click “Submit” 2.Click “Reboot”, its need to wait for 15-20 seconds to enable again. 3.Use Search Tools; click Update to find IP CAM. 4. When change finished, the IP Assignm ent of Search Tools will show DHCP. C. [...]

25 1.Click PPPOE 2.Type User Name and Password, Click ”Submit” 3. Click “Reboot”, its need to wait for 15-20 seconds to enable again. 4. Use Search Tools “ IPEdit ”; click Update to get IP address. If still see same IP address, please click PPPOE in IPEDIT, submit and then click update. 5. As dial successful, you can see real IP address[...]

26 D. HTTP Server: Appoint port number of HTTP, default is 80. HTTP port setting can help use More than one IP Kamera for customer had only one real IP. E. DNS Server: Appoint address of DNS Server IP, default is 168.95.1.1. DNS work especially in FTP SERVER parts (in IE server section), Server setting This page can appoint proper setting of server[...]

27 B. FTP (File Transfer Protocol) Steps: 1. Fill in Ftp Server (IP/ Host), Account ID, Password, and Ftp mode. 2. Click “Submit” to save setting. C. DDNS (Dynamic Domain Name Server) Steps: Before use DDNS service, please create your own account in Websitehttp://www.dyndns.org And apply host name for DDNS service. Regist er user’s name, pass[...]

28 Administration setting By this functions. User can set 9060A-MP (M ega Pixels)’s name, Administration’s account, general user’s account and black list of IP address. When there is two or more 9060A -MP (Mega Pixels), we need to distinguish every one of them. The setting steps: Fill in Camera Name, giving your setting name, then click “ch[...]

29 Event Trigger Event trigger: In this page, users can select to ENABLE one or two Motion Detect functions and the way to transfer detect pictures: Save in PC, Send by E-mail, Save in Ftp server. Click “Submit” after type account/passwor d to relevant text windows. To setup the sensitivity please check page 19: You can amend the detect sensiti[...]

30 Advance (Timer schedule) setting A. Timer Schedule : users can choose appointed peri od (EVERYDAY) for SNAP (take pictures every setting interval) and Motion detection. Format: Hour Minute: Hour Minutes (From H/M to H/M) After select time please click” Add ” then the appointed time will show on bar. You can add 5 (max) period for the schedul[...]

31 Update setting By update functions, user cans online updat e 9060 firmware to get more functions; 1. Press “browse” key to chose new BIN file. 2. Press ”Submit” key to upload, it will holding 7-10 secs (100M Ethernet) 3. The windows will showing “waits syst em Reboot”, it means upload finished. 4. Update will last 50 SECS. During thi[...]

32 Q 2: The Web Kamera does not launch? A: Upgrade Intern et Explorer to 5.0 or higher vers ion and che ck If the subnet is same as your P C. Please refer page 9 for the setting. Sometimes the web camera base cannot bring 'index.html' from the web Camera when the Internet Explorer version is fewer than 4.0. And remember to adjust Internet[...]