Canon i-Sensys LBP6030 manual

㻝㻌㻛㻌㻞㻝㻥[...]

Important Safety Instructions 5 Installation 6 Power Supply 8 Handling 9 Maintenance and Inspections 11 Consumables 12 Basic Operations 14 Parts and Their Functions 15 Front Side 16 Back Side 17 Interior 18 Multi-Purpose Tray 19 Printer Status Window 20 Turning the Power ON and OFF 23 Saving Power 24 Setting Sleep Mode 25 Setting Auto Shutdown 26 L[...]

Configuring the Machine for Your Network Environment 79 Changing the Maximum Transmission Unit 80 Setting a Wait Time for Connecting to a Network 82 Configuring DNS 84 Configuring WINS 88 Configuring NetBIOS 90 Configuring SNTP 92 Monitoring and Controlling the Machine with SNMP 95 Configuring SLP Communication with imageWARE 99 Security 101 Protec[...]

Feature Highlights 182 Going Green and Saving Money 183 Improving Efficiency 184 So Much More 186 Specifications 188 Machine Specifications 189 Wireless LAN Specifications 191 Paper 192 Consumables 194 Manuals Included with the Machine 195 Using the e -Manual 196 Installing the e -Manual 197 Uninstalling the e - Manual 200 Screen Layout of the e - [...]

0HWJ- 000 Important Safety Instructions This chapter describes important safety instructions for the prevention of injury to users of this machine and others, and damage to property. Read this chapter before using the machine, and follow the instructions to use the machine properly. Do not perform a ny operations not described in this manual. Canon[...]

0HWJ- 001 Installation To use this machine safely and in a trouble -free way, carefully read the following precautions and install the machine in an ap propriate location. Do not install in a location that may result in a fire or electrical shock A location where the ventilation slots are blocked (too close to walls, beds, sofas, rugs, or similar o[...]

comfortable working environment, it is recommended that the room where the machine operates be appropriately ventilated. Also avoid locations where people would be exposed to emissions from the machine. Do not install in a location where condensation occurs Water droplets (condensation) may form inside the machine when the room where the machine is[...]

0HWJ- 002 Power Supply This machine is compatible with voltages of 220 to 240 V, and electrical frequency of 50/60 Hz. Use only a power supply that meets the specified voltage requirements. Failure to do so may result in a fire or electrical shoc k. Do not use power cords other than the one provided, as this may result in a fire or electrical shock[...]

0HWJ- 003 Handling Immediately unplug the power plug from the AC power outlet and contact an authorized Canon dealer if the machine makes an unusual noise, emits an unusual smell, or emits smoke or excessive heat. Continued use may result in a fire or electrical shock. Do not disassemble or modify this machine. There are high -voltage and high - te[...]

When transporting the machine To prevent damage to the machine during transport, do the following. Remove the toner cartridge. Securely pack the machine in the original box with the original packing materials. Other precautions Follow the instructions on the caution label attached to this machine. Do not subject the machine to strong shocks or vibr[...]

0HWJ- 004 Maintenance and Inspections Clean this machine periodically. If dust accumulates, the machine may not operate properly. When cleaning, be sure to observe t he following. If a problem occurs during operation, see Troubleshooting . If the problem cannot be resolved or you feel the machine requires an inspection, see When a Problem Cannot Be[...]

0HWJ- 005 Consumables Do not dispose of used toner cartridges in open flames. Also, do not store toner cartridges or paper in a location exposed to open flames. This may cause the toner or paper to ignite, and result in burns or fire. If you accidentally spill or scatter toner, carefully sweep it up or wipe it up with a damp cloth, and avoid inhali[...]

protective bag or wrap it with a thick cloth. When storing the toner cartridge, do not store it upright or upside down. The toner may solidify and not return to its original condition even if it is shaken. Even within the storable humidity range, water droplets (condensation) may develop inside the toner cartridge if there is a difference of temper[...]

0HWJ- 00H Basic Operations This chapter describes the parts of the machine and basic operations, such as how to load paper. Parts and Their Functions This section describes the names and functions of the exterior and interior parts of the machine. Parts and Their Functions Printer Status Window This section explains how to use the "Printer Sta[...]

0HWJ- 00J Parts and Their Functions This section describes the parts of the machine (exterior, front and back side, and interior) and how they function. It also describes the parts of the machine used for basic operations such as loading paper and replacing the toner cartridge, and explains the meanin g o f indications by the keys and indicators on[...]

0HWJ- 00K Front Side Top cover Open the top cover to replace the toner cartridge or clear a paper jam. How to Replace Toner Cartridges Clearing Paper Jams (Wi - Fi) indicator (LBP6030w) Lights up when the machine is connected to a wireless LAN. (Wi - Fi) key (LBP6030w) Use this key when setting up a wireless LAN connection by using the WPS push -bu[...]

0HWJ- 00L Back Side Ventilation slots Air from inside the machine is vented out to cool down the inside of the machine. Note that placing objects in front of the ventilation slots prevents ventilation. Installation Rating label The label shows the serial number, which is needed when making inquiries about the machine. When a Problem Cannot Be Solve[...]

0HWJ- 00R Interior Toner cartridge guide When loading a toner cartridge, align the protrusions on the left and right sides of the cartridge with the guide. How to Replace Toner Cartridges LINKS Replacing Toner Cartridges 㻝㻤㻌㻛㻌㻞㻝㻥[...]

0HWJ- 00S Multi- Purpose Tray Paper guides Adjust the paper guides to exactly the size of the loaded paper to ensure that paper is fed straight into the machine. LINKS Loading Paper in the Multi - Purpose Tray 㻝㻥㻌㻛㻌㻞㻝㻥[...]

0HWJ- 014 Printer Status Window The Printer Status Window is a utility that allows you to check the machine's status, view error information, and make settings related to the machine, such as power saving settings. You can also use it for operations such as cancelling a print job or printing a list of the machine's settings. The Printer S[...]

[Job] menu Allows you to check documents that are printing or waiting. You can also select documents and cancel printing. [Options] menu Allows you to execute maintenance functions, such as printing setting lists or cleaning the fixing unit, and to make machine settings, such as power saving settings. You can also check information such as the tota[...]

Status bar Displays the connection destination (port name) of the Printer Status Window. 㻞㻞㻌㻛㻌㻞㻝㻥[...]

0HWJ- 00U Turning the Power ON and OFF Use the power switch on the front side of the machine to turn the power ON and OFF. To restart the machine, turn the machine OF F, wait for at least 10 seconds, and turn it back ON. Turning the Power ON Turning the Power OFF When you press the power switch, the (Power) indicator lights and the machine is ready[...]

0HWJ- 00W Saving Power You can save power by setting up the machine to automatically enter sleep mode or turn itself OFF after it remains idle for a c ertain length of time. Setting Sleep Mode Setting Auto Shutdown 㻞㻠㻌㻛㻌㻞㻝㻥[...]

0HWJ- 00X Setting Sleep Mode The sleep mode function reduces the amount of power consumed by the machine by temporarily stopping some internal operations. Y ou can set up the machine to enter sleep mode automatically when it remains idle for a certain length of time. The factory default setting for the amount of time that elapses before the machine[...]

0HWJ- 00Y Setting Auto Shutdown You can set up the machine to automatically turn itself OFF after it remains idle for a certain length of time. This prevents w asted power consumption caused by forgetting to turn the machine OFF. The factory default setting for the amount of time that elapses befor e the power is turned OFF is 4 hours. If you want [...]

0HWJ- 010 Loading Paper This section explains how to load paper into the multi -purpose tray. See Paper for information about available paper sizes. Paper Type and Printer Driver Paper Settings Before printing, refer to the table below and make the appropriate paper settings in the printer driver, according to the type of paper that you have loaded[...]

malfunction. It occurs when the heat used to fix toner on the paper causes moisture in the paper to evaporate (most likely to occur at low room temperatures). 㻞㻤㻌㻛㻌㻞㻝㻥[...]

0HWJ- 011 Loading Paper in the Multi- Purpose Tray Load the paper to print in the multi - purpose tray. Always load paper in portrait orientation Paper cannot be loaded in landscape orientation. Be sure to load paper in portrait orientation, as shown in the illustration be low. Open the multi -purpose tray. Spread the paper guides apart. Slide the [...]

When loading envelopes or preprinted paper, see Loading Envelopes or Loading Preprinted Paper . Align the paper guides against the edges of the paper. Align the paper guides securely against the edges of the paper. Align the paper guides securely against the paper Paper guides that are too loose or too tight can cause misfeeds or paper jams. After [...]

0HWJ- 012 Loading Envelopes Make sure to flatten any curls on envelopes before loading them. Also pay attention to the orientation of envelopes and which side is face up. Before Loading Envelopes Loading Envelopes in the Multi - Purpose Tray This section explains how to load envelopes in the orientation you want, as well as preparations that you ne[...]

Load the envelopes Monarch, No. 10 (COM10), DL, or C5 in portrait orientation (with the short edge toward the machine), with the non - glued side (front side) face up. You cannot print on the reverse side of envelopes. Load the envelopes so that the edge with the flap is toward the left side as shown in the illustration. Loading Envelopes in the Mu[...]

0HWJ- 013 Loading Preprinted Paper When you use paper that has been preprinted with a logo or other information, pay attention to the orientation of the paper whe n loading. Load the paper with the logo side (the side on which to print the document) face up and in the proper orientation for the layout of the document. This section explains how to l[...]

0HWJ- 015 Printing You can print documents made with applications on your computer by using the printer driver. There are useful settings in the p rinter driver, such as enlarging/reducing and poster printing, that enable you to print your documents in various ways. Before you can use these functions, you need to install the printer driver on your [...]

0HWJ- 016 Basic Print Operations This section explains how to print a document on your computer by using the printer driver. Open a document in an application and display the print dialog box. How to display the print dialog box differs for each application. For more information, see the instruction manual for the application you are using. Select [...]

Click [OK]. Click [Print] or [OK]. Printing starts. On some applications, a screen like the one shown below appears. If a screen like the one shown above appears, you can cancel printing by clicking [Cancel]. If the screen disappears or is never displayed, you can cancel printing in other ways. Canceling Print Jobs Do not touch printed pages Do not[...]

0HWJ- 017 Canceling Print Jobs You can cancel print jobs from the Printer Status Window. Select the machine by clicking in the system tray. The Printer Status Window is displayed. Cancel the print job. To cancel a print job that is currently printing Click . Printing of the current document is canceled. To cancel a print job that is waiting 1 Selec[...]

Several pages may be output after you cancel printing. TIPS Canceling from the Remote UI (LBP6030w) You can cancel printing from the [Job Status] page on the Remote UI. Checking the Current Status of Print Documents Canceling from an application On some applications, a screen like the one shown below is displayed during printing. You can cancel pri[...]

0HWJ- 018 Checking the Print Status You can check the current print status in the Printer Status Window. This is convenient if you have been waiting for a long time for your document to be printed, and you want to see a list of the documents waiting to be printed. Select the machine by clicking in the system tray. Select [Job] [Job Status]. A list [...]

0HWJ- 019 Various Print Settings There are a variety of print settings that you can use, such as enlarged/reduced printing and poster printing. Select the settings that you need for the document that you want to print. Enlarging or Reducing Collating Printouts by Page Printing Multiple Pages Onto One Sheet Printing Posters Printing Borders Printing[...]

0HWJ- 01A Enlarging or Reducing You can make enlarged or reduced printouts by using a preset print ratio, such as A5 to A4, or a custom print ratio that you set in increments of 1%. Specifying the Print Ratio by Specifying the Original Document and Paper Size (Preset Ratio) The print ratio is set automatically based on the document and paper size y[...]

LINKS Basic Print Operations 㻠㻞㻌㻛㻌㻞㻝㻥[...]

0HWJ- 01C Collating Printouts by Page When printing copies of multi -page documents, you can use the collate function to print complete sets in sequential page order. This function is useful when preparing handouts for meetings or presentations. [Basic Settings] tab Select [Collate] or [Group] in [Finishing] [OK] [Finishing] Specify the sorting met[...]

0HWJ- 01E Printing Multiple Pages Onto One Sheet You can print multiple pages onto a single sheet. For example, you can print four or nine pages onto a single sheet by using [4 on 1] or [9 on 1]. Use this function if you want to save paper or to view your document in thumbnails. [Basic Settings] tab In [Page Layout], select the number of page to pr[...]

0HWJ- 01F Printing Posters You can print parts of a single document page onto multiple pages, which can then be combined to make a poster. For example, if you divide an A4 page into nine parts, print each part nine times larger, and then combine the parts, you will have a poster as large as nine A4 pages. [Basic Settings] tab In [Page Layout], sele[...]

0HWJ- 01H Printing Borders You can add borders, such as broken lines or double lines, in the margins of printouts. [Page Setup] tab Click [Page Options] Select the border type in [Edging] [OK] [OK] [Edging] Selects the type of border to add to the document. Preview Displays a preview with the selected border. LINKS Basic Print Operations Printing D[...]

0HWJ- 01J Printing Dates and Page Numbers You can print information such as dates or page numbers, and you can specify where to print this information on the document (upper left, lower right, etc.). [Page Setup] tab Click [Page Options] Select the printing position for the date, user name, and page number [OK] [OK] [Print Date] Specifies the print[...]

0HWJ- 01K Printing Watermarks You can print watermarks such as "COPY" or "CONFIDENTIAL" on the document. You can create new watermarks or use pre -registered watermarks. [Page Setup] tab Select [Watermark] check box Select the watermark type with [Watermark Name] [OK] [Watermark]/[Watermark Name] Select the [Watermark] check box[...]

Printing Borders Printing Dates and Page Numbers 㻠㻥㻌㻛㻌㻞㻝㻥[...]

0HWJ- 01L Printing According to the Document Type You can specify the document type to ensure optimal image quality. There are different settings for photo documents, documents that have charts or graphs, and documents that have design drawings with fine lines. [Quality] tab Select the document type in [Objective] [OK] [Objective] Select an option [...]

0HWJ- 01R Saving Toner You can set the printer driver to print documents using less toner. When the save toner setting is enabled, fine lines and sections with lighter density may be less sharp that normal. [Quality] tab Select the document type in [Objective] Click [Advanced Settings] Select [Toner Save] in the [Advanced Settings] screen Select [O[...]

0HWJ- 01S Combining and Printing Multiple Documents By using Canon PageComposer, you can combine multiple documents into one print job and print the job with specified print settings. For example, this function enables you to combine documents made with different applications and print all of the pages in the same paper size. Open a document in an [...]

From the [Document Name] list, select the documents to combine, and click . To select multiple documents, click the documents while holding down the [SHIFT] key or [CTRL] key. Change the settings as necessary, and click [Combine]. The documents selected in step 6 are combined. [Print Preview] Displays a preview of the document to be printed. [Docum[...]

Printing starts. To cancel printing, see Canceling Print Jobs . LINKS Basic Print Operations Printing Multiple Pages Onto One Sheet 㻡㻠㻌㻛㻌㻞㻝㻥[...]

0HWJ- 01U Configuring Print Settings to Your Needs You can register combinations of settings as "profiles" to suit your different printing objectives. Also, you can register the settings that you frequently use as the default settings. Once the default settings are registered, they are displayed automatically in the printer driver screen,[...]

0HWJ- 01W Registering Combinations of Frequently Used Print Settings Specifying combinations of settings such as "1 - sided landscape orientation on A4 size paper in save toner mode" every time you print is time consuming. If you register your frequently used combinations of print settings as "profiles," you can specify print se[...]

Changing the settings of the currently selected profile You can change the settings of the currently selected profile. In addition, the changed settings can be registered as another profile. LINKS Basic Print Operations Changing Default Settings 㻡㻣㻌㻛㻌㻞㻝㻥[...]

0HWJ- 01X Changing Default Settings The default settings are the settings that are first displayed whenever you open the print settings screen of the printer drive r. You can change these settings to the settings that you use most often. For example, if you always want to print 2 document pages on eac h printout page, set [2 on 1] as the default pa[...]

0HWJ- 01Y Network This machine has been designed for flexibility of use across a variety of environments. In addition to basic network features, it includes advanced network technologies. Make the required settings depending on your network environment. Do not worry if you are not a network expert, because the machine has also been designed for con[...]

0HWJ- 020 Connecting to a Network You can connect the machine to a wireless LAN network, and you can use a unique IP address within the network. For specific IP address settings, contact your Internet service provider or network administrator. If the machine is connected to an unsecured network, your personal information might be leaked to a third [...]

0HWJ- 021 Connecting to a Wireless LAN Wireless routers (or access points) connect the machine to a computer via radio waves. If your wireless router is equipped with Wi -Fi Protected Setup (WPS), you can configure your network with a simple button push. If your networking devices do not support auto matic configuration, or if you want to specify a[...]

If the above screen does not appear Displaying the [CD - ROM/DVD - ROM Setup] Screen If [AutoPlay] is displayed, click [Run MInst.exe]. Click [Start] for [MF/LBP Network Setup Tool]. Follow the on -screen instructions to configure the wireless LAN settings. If there is something you do not understand Click [Useful Tips] at the bottom left of the sc[...]

0HWJ- 022 Setting IP Addresses Connecting the machine to a network requires an IP address that is unique in that network. There are two types of IP addresses: IPv4 and IPv6. Use the type required by your network environment. Note that before you can use an IPv6 address, you first need to pr operly configure an IPv4 address. 㻢㻟㻌㻛㻌㻞㻝㻥[...]

0HWJ- 023 Setting IPv4 Address The machine's IPv4 address can be either assigned automatically by a dynamic IP addressing protocol, such as DHCP, or entered manually. Start the Remote UI and log on in System Manager Mode. Starting the Remote UI Click [Settings/Registration]. Click [Network Settings] [TCP/IP Settings]. Click [Edit] in [IPv4 Set[...]

Automatically assigning an IP address 1 In the [Select Protocol] list, select [DHCP], [BOOTP], or [RARP]. If you do not want to use DHCP/BOOTP/RARP to assign an IP address automatically Select [Off]. If you select the [DHCP], [BOOTP], or [RARP] protocol when these services are unavailable, the machine will waste time and communications resources se[...]

0HWJ- 024 Setting IPv6 Addresses Use the Remote UI to set IPv6 addresses. Before setting IPv6 addresses, make sure that the IPv4 address has been set correctly ( Viewing Network Settings ). You can register up to nine of the following IPv6 addresses. Type Maximum number available Description Link-local address 1 An address that is valid only within[...]

Select the [Use IPv6] check box and configure the required settings. [Use IPv6] Select the check box to use IPv6 on the machine. Clear the check box if you do not want to use IPv6. [Stateless Address] Check to use stateless addresses. Clear the check box if you do not want to use stateless addresses. [Use Manual Address] When you want to enter an I[...]

Checking whether the settings are correct Make sure that the Remote UI screen can be displayed with your computer by using the IPv6 address of the machine. Starting the Remote UI If you change IP addresses after installing the printer driver You need to add a new port. Configuring Printer Ports LINKS Setting IPv4 Address Viewing Network Settings ?[...]

0HWJ- 025 Viewing Network Settings Press this machine's (Paper) key and hold it down for 3 seconds to print a partial list of network settings. This allows you to check IPv4 settings, the MAC address, and wireless LAN settings. The setting list is formatted to print on A4 size paper. Before printing, load A4 size paper in the multi -purpose tr[...]

Wireless LAN Settings Displays MAC address and wireless LAN settings. MAC Address Displays the MAC address. SSID Settings Displays SSID settings. Security Displays the currently applied security settings. If the security settings have not been configured, "None" is displayed. Wireless LAN Status Displays the connection status (signal stre[...]

0HWJ- 026 Configuring for Printing from a Computer When using the machine as a network printer, you can configure the protocols and ports used for printing. Before starting, make sure that you have completed all basic preparations for printing (Printer Driver Installation Guide). Printing protocols are rules for delivering document data created on [...]

0HWJ- 027 Configuring Printing Protocols and Web Services The following explains how to configure printing protocols for printing documents from computers. The protocols supported by th e machine are LPD, RAW, and WSD (Web Services on Devices). To change protocol port numbers Changing Port Numbers Start the Remote UI and log on in System Manager Mo[...]

[Use LPD Printing] Select the check box to print using LPD. Clear the check box if you do not want to use LPD printing. [Use RAW Printing] Select the check box to print using RAW. Clear the check box if you do not want to use RAW printing. 3 Click [OK]. Configuring WSD 1 Click [Edit] in [WSD Settings]. 2 Configure the settings as necessary. [Use WS[...]

LINKS Configuring Printer Ports 㻣㻠㻌㻛㻌㻞㻝㻥[...]

0HWJ- 028 Configuring Printer Ports Printing errors can occur when the print protocol settings of the machine have been changed, or when a printer has been added via the Windows printer folder. These errors are typically caused by incorrect printer port settings, for example when a computer specifies an incorrect printer port number or type in the [...]

Adding a standard TCP/IP port 1 Click [Add Port]. 2 Select [Canon MFNP Port] in [Available port types] and click [New Port]. 3 Select [Auto Detect] and select the machine when it is detected, and then click [Next]. If the machine is not detected Click [Refresh]. If the problem persists, select [IP address] or [MAC address], enter the IP address or [...]

Changing the port type or number If the printing protocol (LPD or RAW) has been changed on the machine side ( Configuring Printing Protocols and Web Services ) or the port number has been changed ( Changing Port Numbers ), the corresponding settings on the computer must also be configured. This operation is not needed for WSD ports. MFNP port Stand[...]

Click [Close]. 3 Click [OK]. 4 㻣㻤㻌㻛㻌㻞㻝㻥[...]

0HWJ- 029 Configuring the Machine for Your Network Environment The size and configuration of a network varies depending on the purpose of the network. This machine has been designed to be compatible with as many network configurations as possible, and it is equipped with a variety of network technologies. Consult your network administrator and set [...]

0HWJ- 02A Changing the Maximum Transmission Unit In most Ethernet networks, the maximum size of a packet that can be sent is 1500 bytes. A packet refers to a small chunk of dat a. The original data is divided into packets before being sent. The maximum transmission unit (MTU) may vary on each network. Change t he settings of the machine as necessar[...]

Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. LINKS Setting a Wait Time for Connecting to a Network 㻤㻝㻌㻛㻌㻞㻝㻥[...]

0HWJ- 02C Setting a Wait Time for Connecting to a Network When a network is designed with multiple switching hubs or bridges in order to provide redundant connectivity, it must have a mechanism to prevent packets from looping. One effective solution is to define the role of each switch port. However, communica tion may still be disrupted for a cert[...]

LINKS Changing the Maximum Transmission Unit 㻤㻟㻌㻛㻌㻞㻝㻥[...]

0HWJ- 02E Configuring DNS DNS (Domain Name System) provides a service for name resolution that associates a host (or domain) name with an IP address. Configure the DNS, mDNS, or DHCP option settings as necessary according to your network. Note that the procedures for configuri ng DNS are different for IPv4 and IPv6. Start the Remote UI and log on i[...]

[DNS Settings] [Primary DNS Server Address] Enter the IP address of the DNS server. [Secondary DNS Server Address] When there is a secondary DNS server, enter its IP address. [Host Name] Enter up to 47 alphanumeric characters for the host name of the machine that is to be registered with the DNS server. [Domain Name] Enter up to 47 alphanumeric cha[...]

2 Configure the IPv6 DNS settings. The [Use IPv6] check box must be selected to configure the settings. Setting IPv6 Addresses [DNS Settings] [Primary DNS Server Address] Enter the IP address of the DNS server. Addresses that start with "ff" (multicast addresses) and the loopback address (::1) cannot be entered. [Secondary DNS Server Addr[...]

Setting IPv4 Address Setting IPv6 Addresses Viewing Network Settings 㻤㻣㻌㻛㻌㻞㻝㻥[...]

0HWJ- 02F Configuring WINS Windows Internet Name Service (WINS) is a name resolution service that associates a NetBIOS name (a computer or printer name in a NetBIOS network) with an IP address. To use WINS, a WINS server must be specified. To register this machine with a WINS server, a NetBIOS name and workgroup name must be set. Configuring NetBIO[...]

[WINS Resolution] Select the check box to use WINS for name resolution. When not using WINS, clear the check box. [WINS Server Address] Enter the IP address (IPv4) of the WINS server. If the IP address of the WINS server is obtained from a DHCP server, the obtained IP address overrides the IP address entered i n the [WINS Server Address] text box. [...]

0HWJ- 02H Configuring NetBIOS To register this machine with a WINS server, a NetBIOS name and workgroup name must be set. Start the Remote UI and log on in System Manager Mode. Starting the Remote UI Click [Settings/Registration]. Click [Network Settings] [TCP/IP Settings]. Click [Edit] in [NetBIOS Settings]. Enter the required information. [NetBIO[...]

NetBIOS or workgroup names that start with an asterisk (*) cannot be registered with a WINS server. Click [OK]. Restart the machine. Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. LINKS Configuring WINS 6 7 㻥㻝㻌㻛㻌㻞㻝㻥[...]

0HWJ- 02J Configuring SNTP Simple Network Time Protocol (SNTP) enables you to adjust the system clock by using a time server on the network. When you use SNTP, the system checks the timer server periodically, so that the system clock is always accurate. The time is based on Coordinated Universal Time (UTC), so specify the time zone setting before c[...]

[Use SNTP] Select the check box to use SNTP for synchronization. Clear the check box if you do not want to use this function. [NTP Server Name] Enter the IP address of the NTP or SNTP server. If a DNS server is available on the network, you can enter "<host name>.<domain name>" (FQDN) of up to 255 alphanumeric characters inste[...]

㻥㻠㻌㻛㻌㻞㻝㻥[...]

0HWJ- 02K Monitoring and Controlling the Machine with SNMP Simple Network Management Protocol (SNMP) is a protocol for monitoring and controlling communication devices in a network by using a Management Information Base (MIB) database. The machine supports SNMPv1 and security -enhanced SNMPv3. They allow you to check the status of the machine from [...]

Click [Edit]. Specify SNMPv1 settings. If you do not need to change SNMPv1 settings, proceed to the next step. [Use SNMPv1] Select the check box to enable SNMPv1. You can specify the rest of the SNMPv1 settings only when this check box is selected. [Community Name 1]/[Community Name 2] Enter up to 32 alphanumeric characters for the name of the comm[...]

Specify SNMPv3 settings. If you do not need to change SNMPv3 settings, proceed to the next step. [Use SNMPv3] Select the check box to enable SNMPv3. You can specify the rest of the SNMPv3 settings only when this check box is selected. [Enable User] Select the check box to enable [User Settings 1]/[User Settings 2]/[User Settings 3]. To disable user[...]

Select the check box to enable monitoring of the printer management information of the machine via SNMP. To disable monitoring of the printer management information, clear the check box. Click [OK]. Restart the machine. Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Disabling both SNMPv1 and SNMPv3 If both versions of SNMP[...]

0HWJ- 02L Configuring SLP Communication with imageWARE You can use device management software such as imageWARE Enterprise Management Console to facilitate the collection and management of various information about networked devices. In an environment where such software is installed, information abou t device settings and errors is collected via a[...]

Select the [Respond to Discovery] check box and enter the required information. [Respond to Discovery] Select the check box to set the machine to respond to imageWARE multicast discovery packets and enable management by imageWARE. If you do not want to respond, clear the check box. [Scope Name] To include the machine in a specific scope, enter up t[...]

0HWJ- 02R Security Confidential information is handled by information devices everywhere, including computers and printers, and any of these devices may become a target for malicious third parties at any time. Attackers may directly gain unauthorized access to your devices, or in directly take advantage of negligence or improper use. Either way, yo[...]

0HWJ- 02S Protecting the Machine from Unauthorized Access To prevent unauthorized third parties from accessing and using the machine, you can implement multiple security measures, such as setting system manager passwords, using firewalls, and changing port numbers. 㻝㻜㻞㻌㻛㻌㻞㻝㻥[...]

0HWJ- 02U Setting System Manager Passwords Administrator access rights are required to change machine settings from the Remote UI. After logging in as an administrator, use the following procedure to set the PIN (system manager password). The system manager password is critical to the security of the ma chine. Make sure that only system managers kn[...]

[System Manager Name] Enter up to 32 alphanumeric characters for the name of the system manager. [Contact Information] Enter up to 32 alphanumeric characters for the contact information of the system manager. [E- Mail Address] Enter up to 64 alphanumeric characters for the e- mail address of the system manager. [System Manager Comment] Enter up to [...]

0HWJ- 02W Restricting Communication by Using Firewalls Without proper security, unauthorized third parties can access computers and other communication devices that are connected to a network. To lower the risk of unauthorized access, you can allow communication with devices having specified IP addresses and r eject communication with other devices[...]

[IPv4 Address: Outbound Filter] Restrict data sent from the machine to a computer by specifying an IPv4 address. [IPv4 Address: Inbound Filter] Restrict data received by the machine from a computer by specifying an IPv4 address. [IPv6 Address: Outbound Filter] Restrict data sent from the machine to a computer by specifying an IPv6 address. [IPv6 Ad[...]

Enter hexadecimal numbers delimited by ":" (colons) (Example: "fe80::10"). To specify a range of addresses Insert a hyphen ("-") between the addresses (Examples: "192.168.0.10 -192.168.0.20" "fe80::10 -fe80::20"). To specify a range of addresses with a prefix Enter an address, followed by a slash (&[...]

0HWJ- 02X Changing Port Numbers Ports serve as endpoints for communicating with other devices. Typically, standard port numbers are used for major protocols, b ut devices that use these port numbers are vulnerable to attacks because these port numbers are well -known. To enhance security, s ome network administrators prefer to change the port numbe[...]

[LPD]/[RAW] Change the port used for LPD printing or RAW printing. For details about each protocol, see Configuring Printing Protocols and Web Services . [HTTP] Change the port used by HTTP. HTTP is used for communications over the network, such as when you access the machine via the Remote UI. [SNMP] Change the port used by SNMP. For details about[...]

0HWJ- 02Y Enabling SSL Encrypted Communication for the Remote UI Authorized users may incur unanticipated losses from attacks by malicious third parties, such as sniffing, spoofing, and tamper ing of data as it flows over a network. To protect your valuable data, you can encrypt Remote UI communication between the machine and a We b browser on the [...]

Select the key to use from the list of keys and certificates, and click [Register Default Key]. Viewing details of a key pair or certificate You can check the details of the certificate or verify the certificate by clicking the corresponding text link under [Key Name] , o r the certificate icon. Verifying Key Pairs and CA Certificates Enable SSL. 1[...]

Starting the Remote UI with SSL enabled If you start the Remote UI when SSL is enabled, a security alert may be displayed regarding the security certificate. In this c ase, check that the correct URL is entered in the address field, and then proceed to display the Remote UI. Starting the Remote UI LINKS Generating Key Pairs Using CA - issued Key Pa[...]

0HWJ- 030 Configuring Settings for Key Pairs and Digital Certificates In order to encrypt communication with a remote device, an encryption key must be sent and received over an unsecured network beforehand. This problem is solved by public -key cryptography. Public -key cryptography ensures secure communication by protecti ng valuable information [...]

0HWJ- 031 Generating Key Pairs The key pair required for encrypted communication via Secure Sockets Layer (SSL) can be generated with the machine. You can use SSL when accessing the machine via the Remote UI. Up to three key pairs can be registered on the machine. Start the Remote UI and log on in System Manager Mode. Starting the Remote UI Click [[...]

[Key Settings] [Key Name] Enter up to 24 alphanumeric characters for naming the key pair. Set a name that will be easy for you to find later in a list. [Signature Algorithm] Select the signature algorithm from the drop -down list. [Key Algorithm] The algorithm used to generate keys is RSA. Select the key length from the drop -down list. The larger [...]

0HWJ- 032 Using CA - issued Key Pairs and Digital Certificates Key pairs and digital certificates can be obtained from a certification authority (CA) for use with the machine. After obtainin g them from a CA, you can install and register key pairs and CA certificate files on the machine by using the Remote UI. Make sure that the key pair and the ce[...]

You can only install one file on this machine. If another file is already installed, click [Delete] [OK] to delete the previously installed file. Click [Browse], specify the file to install, and click [Start Installation]. The key pair or CA certificate from the computer is installed in the machine. Register the key pair or CA certificate. Register[...]

Click [Register] on the right of the CA certificate you want to register. LINKS Generating Key Pairs Verifying Key Pairs and CA Certificates Enabling SSL Encrypted Communication for the Remote UI 㻝㻝㻤㻌㻛㻌㻞㻝㻥[...]

0HWJ- 033 Verifying Key Pairs and CA Certificates Once key pairs and CA certificates are registered, you can view their detailed information or verify their effective dates and signature. Start the Remote UI and log on in System Manager Mode. Starting the Remote UI Click [Settings/Registration]. Click [Security Settings] Click [Key and Certificate [...]

The result from verifying the certificate is displayed as shown below. LINKS Generating Key Pairs Using CA - issued Key Pairs and Digital Certificates 㻝㻞㻜㻌㻛㻌㻞㻝㻥[...]

0HWJ- 034 Using the Remote UI You can use a Web browser to operate the machine remotely, check the documents waiting to be printed, and check the status of t he machine. You can also make network and other settings for the machine. The "Remote UI" starts when you enter the IP address of the machine in your Web browser. It is very convenie[...]

0HWJ- 035 Starting the Remote UI To operate the machine remotely, start the Remote UI by entering the machine's IP address in your Web browser. Before starting, check the IP address that has been assigned to the machine ( Viewing Network Settings ). If you do not know the machine's IP address, ask your network administrator, or start the [...]

If you do not know the machine's IP address, you can start the Remote UI from the Printer Status Window. Select the machine by clicking in the system tray. Click . Your Web browser starts, and the login page of the Remote UI appears. If a security alert is displayed A security alert may be displayed when communication with the Remote UI is enc[...]

0HWJ- 036 Remote UI Screens This section describes the main screens of the Remote UI. Portal Page (Main Page) [Status Monitor/Cancel] Page [Settings/Registration] Page [Log Out] Logs out from the Remote UI and returns to the log on page. [Mail to System Manager] Displays a window for creating an e- mail to the system manager. Contact information fo[...]

Menu Click an item to display the content in the page on the right. Managing Documents and Checking the Machine Status Breadcrumb trail Indicates the series of pages you opened to display the current page. You can use this to check which page you are currently displaying. Refresh Icon Refreshes the current page. Top Icon Moves up to the top of the [...]

0HWJ- 037 Managing Documents and Checking the Machine Status Checking the Current Status of Print Documents Checking the History of Printed Documents Checking Error Information Checking the Maximum Print Speed Checking System Manager Information Viewing the Page Counter Value The name of the application that requested printing may be added to the f[...]

When an error occurs, you can display this page by clicking the message displayed under [Error Information] on the Portal Page (main page). Portal Page (Main Page) Log on to the Remote UI ( Starting the Remote UI ) [Status Monitor/Cancel] [Error Information] This page displays the maximum print speed of the machine. Log on to the Remote UI ( Starti[...]

Log on to the Remote UI ( Starting the Remote UI ) [Status Monitor/Cancel] [Device Information] This page displays a total page count of the documents that have been printed. Log on to the Remote UI ( Starting the Remote UI ) [Status Monitor/Cancel] [Check Counter] LINKS Remote UI Screens Viewing the Page Counter Value 㻝㻞㻤㻌㻛㻌㻞㻝㻥[...]

0HWJ- 038 Changing Machine Settings You can change various machine settings from your computer by using the Remote UI. For example, you can change network and security settings. However, to change settings under [System Management Settings], you must log on in System Manager Mode. Start the Remote UI Starting the Remote UI Click [Settings/Registrat[...]

0HWJ- 039 Setting Menu List This section describes the menu items that can be set using the Remote UI. Default settings are marked with a dagger ( ). [Preferences] Menu Display Settings Timer Settings [Adjustment/Maintenance] Menu Utility Menu [System Management Settings] Menu System Management Security Settings Network Settings Initialize Setting [...]

Use Daylight Saving Time Off On Start January to March to December 1st to Last Monday to Sunday End January to October to December 1st to Last Monday to Sunday Auto Sleep Time Off After 1 minute After 5 minutes After 10 minutes After 15 minutes After 30 minutes After 60 minutes After 90 minutes After 120 minutes After 150 minutes After 180 minutes [...]

You can clean the fixing unit inside the machine. Cleaning Clean the fixing unit if black spots or streaks appear on printouts. Note that you cannot clean the fixing unit when the machine has documents waiting to be printed. To clean the fixing unit, you need plain A4 size paper. Before starting, load A4 size paper in the multi -purpose tray. ( Loa[...]

Enable or disable encrypted communication via SSL and IP address packet filtering. Remote UI Settings Select whether to use SSL encrypted communication. Enabling SSL Encrypted Communication for the Remote UI Use SSL Off On Key and Certificate Settings Register key pairs, or generate them on the machine. You can check and verify registered key pairs[...]

Use Filter Off On Default Policy Reject Allow IPv4 Address: Inbound Filter Reject data received by the machine from a computer with a specified IPv4 address. Restricting Communication by Using Firewalls Use Filter Off On Default Policy Reject Allow IPv6 Address: Outbound Filter Do not allow the machine to send data to a computer with a specified IP[...]

Host Name Domain Name DNS Dynamic Update Off On DNS Dynamic Update Interval: 0 to 24 to 48 (hours) mDNS Settings Use mDNS Off On mDNS Name DHCP Option Settings Acquire Host Name Off On DNS Dynamic Update Off On IPv6 Settings Specify settings for using the machine in an IPv6 network. Setting IPv6 Addresses Configuring DNS IP Address Settings Use IPv[...]

LPD Print Settings Enable or disable LPD, a printing protocol that can be used on any hardware platform or operating system. Configuring Printing Protocols and Web Services Use LPD Printing Off On NetBIOS Settings Set a NetBIOS name and a workgroup name, which must be set to register this machine with a WINS server. Configuring NetBIOS NetBIOS Name[...]

MTU Size 1300 1400 1500 SNTP Settings Specify whether to acquire the time from a time server on the network. Configuring SNTP Use SNTP Off On NTP Server Name Polling Interval: 1 to 24 to 48 (hours) SNMP Settings Specify the settings for monitoring and controlling the machine from a computer running SNMP - compatible software. Monitoring and Control[...]

Waiting Time for Connection at Startup Specify a wait time for connecting to a network. Select the setting depending on your network environment. Setting a Wait Time for Connecting to a Network Waiting Time 0 to 300 (seconds) Wireless LAN Settings You can check wireless LAN settings and status information. Wireless LAN settings cannot be changed fr[...]

Initializes settings and returns the machine to the factory default state. Initialize Menu Returns the settings in the [Preferences] Menu to the factory default settings. Initializing Preferences Settings Initialize System Management Settings Returns the settings in the [System Management Settings] Menu to the factory default settings. Initializing[...]

0HWJ- 03A Troubleshooting When a problem occurs, check this chapter to find out solutions before contacting Canon. Paper Jams If the paper jams, see Clearing Paper Jams to remove the jammed paper. A Message Appears If the Printer Status Window displays an error message, see When an Error Message Appears . Common Problems If you suspect that the mac[...]

0HWJ- 03C Clearing Paper Jams If paper jams, <Paper Jam inside Printer> is displayed in the Printer Status Window. Use the following procedure to remove the jammed paper. Before starting, carefully read the safety instructions in Important Safety Instructions . When removing the jammed paper, do not turn OFF the machine Turning OFF the machin[...]

Check whether paper is jammed inside the machine. 1 Open the top cover. 2 Remove the toner cartridge. 3 Gently pull out the paper. Hold both edges of the paper, pull the leading edge of the paper down, and then pull it out. 4 Replace the toner cartridge. Align with the toner cartridge guide ( ), and push firmly all the way in. 5 Close the top cover[...]

0HWJ- 03E When an Error Message Appears An error message appears in the Printer Status Window when there is a problem with print processing, when the machine cannot communicate, or when some other problem prevents normal operation. See the following list for more information about error mess ages. Cannot Communicate with Printer Bidirectional commu[...]

Check Printed Output The job may not be printed normally. can be clicked to continue printing. If you continue printing and the results are not satisfactory, print the job again. Check Printer The toner cartridge is not set. Set the toner cartridge correctly. How to Replace Toner Cartridges There is paper from a paper jam left inside the machine. T[...]

The machine is connected to an unsupported port. Check the port. Checking the Printer Port If the port you need is not available If you are using a network connection, configure the port. Configuring Printer Ports If you are using a USB connection, reinstall the printer driver. Printer Driver Installation Guide Insufficient Printer Memory The docum[...]

Clearing Paper Jams Service Error An error has occurred inside the machine. Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. If the message does not reappear, you can continue using the machine. If the same message reappears after you turn the power back ON, turn the power OFF, unplug the power plug from the AC power outlet [...]

0HWJ- 03F Common Problems If you encounter problems when using the machine, check the items in this section before contacting us. If the problems persist, contact your local authorized Canon dealer or the Canon help line. Is the machine turned ON ? / Is the power cord connected ? The (Power) indicator does not light if the machine is not turned ON.[...]

0HWJ- 03H Installation/Settings Problems Together with this section, see Common Problems . Problems with the Wireless LAN Connection (LBP6030w) Problems with the USB Connection Problems via the Print Server Remote UI is not displayed. The (Wi -Fi) indicator lights if a connection has been established. Check whether it is lit, and whether IP address[...]

Reset the wireless LAN settings Connecting to a Wireless LAN When you need to manually set up the connection If the wireless router is set up as described below, enter the required information manually. The stealth function is enabled. ANY connection refusal is enabled. The WEP key number to use is set to a number from 2 to 4. The automatically gen[...]

0HWJ- 03J Printing Problems Together with this section, see Common Problems . For problems related to connection with the computer, see Installation/Settings Problems . Printing results are not satisfactory, or the paper is curled or wrinkled. When You Cannot Print Properly You cannot print. Can you print a Windows test page? If you can print a Win[...]

Via print server It takes a long time before printing starts. Did you print on narrow paper ? After you print to narrow width paper, the machine may wait until the temperature inside the machine has fallen before resuming printing. This is done to maintain printing quality. As a result, it may take some time befo re the next job is printed. Wait un[...]

0HWJ- 03K When You Cannot Print Properly If printing results are not satisfactory, or paper creases or curls, try the following solutions. If the problems persist, contact your local authorized Canon dealer or the Canon help line. Smudge Marks Appear on the Bottom Edge of Printouts Streaks Appear on Printouts Toner Smudges and Splatters Appear Afte[...]

0HWJ- 03L Printing Results Are Not Satisfactory Grime inside the machine may affect printing results. First try cleaning the machine. Cleaning the Machine Smudge Marks Appear on the Bottom Edge of Printouts Did you print data without margins, all the way to the edge of the page ? This symptom occurs if a margin is set to none in the printer driver.[...]

long period. In the printer driver, change the setting of [Special Print Adjustment B]. The remedial effect is weakest for [Mode 1] and strongest for [Mode 3]. Try the adjustment starting with [Mode 1]. [Finishing] tab [Advanced Settings] [Special Print Adjustment B] Select mode When you select a stronger improvement effect, printing speed becomes [...]

reload it into the machine. Using Up All of the Toner Are you using appropriate paper? Check the usable paper types, and replace with appropriate paper. Paper Have you specified the correct paper type ? Specify the type of paper again, according to the type of paper that you are using. Basic Print Operations A Portion of the Page Is Not Printed/Pri[...]

Are you using appropriate paper? Check the usable paper types, and replace with appropriate paper. Paper Is it time to replace the toner cartridge ? Materials inside the toner cartridge may have deteriorated. Replace the toner cartridge. How to Replace Toner Cartridges Are you printing a document with strong contrasts between light and dark, and do[...]

Printed Barcode Cannot Be Read Are you trying to read a small barcode or one with thick lines ? Enlarge the barcode. In the printer driver, set [Special Print Mode] to [Special Settings 1]. [Finishing] tab [Advanced Settings] [Special Print Mode] [Special Settings 1] When you specify [Special Settings 1], printouts may be faded. 㻝㻡㻣㻌㻛㻌?[...]

0HWJ- 03R Paper Creases or Curls Paper Creases Is the paper loaded correctly? Paper may crease when it is not loaded below the load limit guides, or when it is loaded obliquely. Loading Paper in the Multi - Purpose Tray Are you using paper that has absorbed moisture ? Replace with appropriate paper. Paper If you are using A4, Letter size, or Legal [...]

Printing speed may be slower when you select this check box. If you are using A4, Letter size, or Legal size paper, change the setting of [Wrinkle Adjustment] in the printer driver. The improvement effect is weaker for [Mode 1] and stronger for [Mode 2]. Try the adjustment starting with [Mode 1]. [Finishing] tab [Advanced Settings] [Wrinkle Adjustm[...]

0HWJ- 03S Paper Is Fed Incorrectly Is the paper loaded correctly? Fan the paper stack thoroughly so that the sheets are not stuck together. Check whether the paper is loaded correctly. Loading Paper in the Multi - Purpose Tray Check whether the number of sheets of paper loaded is appropriate and whether the appropriate paper is used. Paper Check wh[...]

0HWJ- 03U When a Problem Cannot Be Solved If a problem cannot be resolved, contact your local authorized Canon dealer or the Canon help line. Do not disassemble or repair the machine yourself If you disassemble or repair the machine yourself, it may not be covered by warranty. When Contacting Canon When contacting us, have the following information[...]

0HWJ- 03W Maintenance This chapter describes upkeep of the machine, including how to clean the machine and print setting lists. Basic Maintenance Cleaning the Machine The machine becomes dirty Exterior Smudge marks appear on printouts Fixing Unit Replacing Toner Cartridges Replacing Toner Cartridges If you want to use all of the toner Using Up All [...]

0HWJ- 03X Cleaning the Machine Clean the machine regularly to prevent deterioration in printing quality and to ensure safe and trouble -free operation. Carefully read the safety instructions before you start cleaning. Maintenance and Inspections Where to Clean Exterior of the machine and ventilation slots Exterior Internal fixing unit Fixing Unit R[...]

Select [Options] [Utility] [Cleaning]. Click [OK]. The paper is fed slowly into the machine, and cleaning starts. The cleaning is done when the paper is completely ejected. Cleaning cannot be cancelled once it starts. Wait until it finishes (approx. 140 seconds). Cleaning from the Remote UI You can also clean the fixing unit from the [Utility Menu][...]

0HWJ- 041 Replacing Toner Cartridges No warning message appears, even when toner begins to run low. Use the printout symptoms described below as a guide to when to replace the toner cartridge. How to Replace Toner Cartridges White streaks appear Faded Uneven density Afterimages Appear in Blank Areas White Spots Appear When, of the above symptoms, o[...]

LINKS Consumables You can continue printing when this message is displayed, but the print quality may deteriorate. Even if this message is not displayed, use the symptoms listed at the top of this page as a guide to replacing toner cartridges. Replace the toner cartridge when a symptom appears. 㻝㻢㻢㻌㻛㻌㻞㻝㻥[...]

0HWJ- 042 Using Up All of the Toner Printout symptoms like the following appear when toner begins to run low. White streaks appear Faded Uneven density When symptoms like these appear, take the following steps. They will allow you to use up all of the toner in the toner cartridge. You will be able to continue printing for a while longer, until the [...]

Close the top cover. 5 㻝㻢㻤㻌㻛㻌㻞㻝㻥[...]

0HWJ- 043 How to Replace Toner Cartridges Before replacing a toner cartridge, read the precautions in Maintenance and Inspections and Consumables . Open the top cover. Remove the toner cartridge. Remove the new toner cartridge from the protective bag. Shake the toner cartridge 5 or 6 times as shown below to evenly distribute the toner inside the ca[...]

When pulling out the sealing tape If any sealing tape remains inside the toner cartridge, print quality may deteriorate. Do not pull the sealing tape at an angle. If the sealing tape breaks, you may not be able to pull it out completely. If the sealing tape becomes stuck when pulling it out, keep pulling until it is completely removed. Replace the [...]

0HWJ- 044 Printing Setting Lists You can print setting lists from the Printer Status Window. This is convenient when you want to print a list of network setting s or a list of power saving and other configuration settings for the machine. Setting lists are formatted to print on A4 size paper. Before starting, load A4 size paper in the multi -purpos[...]

[...]

0HWJ- 045 Viewing the Page Counter Value You can check the total number of pages that the machine has printed by viewing the page counter in the Printer Status Window. Select the machine by clicking in the system tray. Select [Options] [Counter Information]. The total number of printed pages is displayed. 1 2 㻝㻣㻟㻌㻛㻌㻞㻝㻥[...]

0HWJ- 046 Initializing Settings You can restore the machine's settings to the factory default settings. Initializing Preferences Settings Initializing System Management Settings Initializing Key and Certificate Settings 㻝㻣㻠㻌㻛㻌㻞㻝㻥[...]

0HWJ- 047 Initializing Preferences Settings You can initialize the settings of the Remote UI [Preferences] menu ( Setting Menu List ) to return them to the factory default settings. Start the Remote UI and log on in System Manager Mode. Starting the Remote UI Click [Settings/Registration]. Click [Initialize Setting Information] [Initialize Menu]. S[...]

0HWJ- 048 Initializing System Management Settings You can initialize the settings in the Remote UI [System Management Settings] menu ( Setting Menu List ) to return them to the factory default settings. To initialize [Key and Certificate Settings] and [CA Certificate Settings] in [Security Settings], see Initializing Key and Certificate Settings . [...]

If you initialized the network settings, restart the machine. Turn OFF the machine, wait for at least 10 seconds, and turn it back ON. Initializing by Using the Wi -Fi Key You can use the machine's (Wi -Fi) key to initialize the machine's system management settings. If you turn OFF the machine, and then turn ON the machine while pressing [...]

0HWJ- 049 Initializing Key and Certificate Settings You can restore the settings of key pairs (Key and certificate settings) and CA certificates to the factory default settings. Note that any key pairs that you have registered in the machine and any CA certificates (except the preinstalled CA certificates) will be del eted by the initialization. If[...]

[...]

0HWJ- 04A Relocating the Machine The machine is heavy. To avoid injury, be sure to follow the procedure below when moving the machine. Also be sure to read the safety instructions before you begin. Important Safety Instructions Turn OFF the machine and computer. When you turn OFF the machine, data that is waiting to be printed is deleted. Disconnec[...]

0HWJ- 04C Appendix This chapter contains technical specifications of this machine, instructions on how to use the e -Manual, disclaimers, copyright information, and other information that you may need. Refer to it as required. 㻝㻤㻝㻌㻛㻌㻞㻝㻥[...]

0HWJ- 052 Feature Highlights Give the features that are described in this section a try. The features are grouped under four headings: "Going Green and Savi ng Money," "Improving Efficiency," and "So Much More." 㻝㻤㻞㻌㻛㻌㻞㻝㻥[...]

0HWJ- 053 Going Green and Saving Money Print Multiple Pages on a Single Sheet Sleep Mode Save Toner When there are many pages in a document, the printout can be inconveniently bulky – hard to carry around and store, and also hard to read. But there is a solution. Print multiple pages onto one sheet! This allows you to save paper and make your doc[...]

0HWJ- 054 Improving Efficiency Remote Management with Printer Status Window and Remote UI Register Favorite Settings and Call Them Up at Any Time Save Time with Shortcuts The Printer Status Window and Remote UI allow you to manage the machine remotely from the computer at your desk. You can monitor the state of the machine from your computer, and a[...]

When you have a number of documents to print, it would be convenient to print them all with one operation. Canon PageComposer allows you to combine multiple documents and print them all at once. It is an easy way to save time and work more efficiently. For more information about this function, see Combining and Printing Multiple Documents . 㻝㻤?[...]

0HWJ- 055 So Much More Keep Your Printouts Private Go Wireless (LBP6030w) Make Posters Automatically Collate Meeting Handouts For personal information and sensitive documents that you want to keep private, you can print watermarks such as "CONFIDENTIAL" or "TOP SECRET." In addition to these standard watermarks, you can also desi[...]

For more information about this function, see Collating Printouts by Page . 㻝㻤㻣㻌㻛㻌㻞㻝㻥[...]

0HWJ- 04E Specifications Due to continuing product enhancements, the specifications of this machine are subject to change without notice. Machine Specifications Wireless LAN Specifications Paper 㻝㻤㻤㻌㻛㻌㻞㻝㻥[...]

0HWJ- 04F Machine Specifications Hardware Specifications Software Specifications Type Desktop page printer Printing System Semiconductor laser + dry -type electrophotographic system Toner Fixing System On -demand fixing system Print Speed (Plain paper (60 to 89 g/m²), A4 continuous printing) 18 pages/minute Warm- Up Time (from power ON until machi[...]

User Interface LED indicators: 3 Operation keys: 2 LBP6030B / LBP6030 LED indicators: 2 Operation keys: 1 Power 220 to 240 V (± 10 %), 50/60 Hz (± 2 Hz) Power Consumption (20 °C) Maximum: 870 W or less During operation: Approx. 330 W During standby: 1.8 W or less (USB connection) 2.8 W or less (wireless LAN connection) (LBP6030w only) During sle[...]

0HWJ- 04H Wireless LAN Specifications Standards IEEE 802.11b/g/n Transmission Scheme DS-SS system, OFDM system Frequency Range 2,412 to 2,472 MHz Data Transmission Rate IEEE 802.11b 1/2/5.5/11 Mbps IEEE 802.11g 6/9/12/18/24/36/48/54 Mbps IEEE 802.11n SGI Invalidated 20 MHz: 6.5/13/19.5/26/39/52/58.5/65 Mbps SGI Validated 20 MHz: 7.2/14.4/21.7/28.9/[...]

0HWJ- 04J Paper Supported Paper Sizes Paper sizes that can be loaded in the multi - purpose tray are listed below. A4 (210.0 mm x 297.0 mm) B5 (182.0 mm x 257.0 mm) A5 (148.5 mm x 210.0 mm) Legal (215.9 mm x 355.6 mm) Letter (215.9 mm x 279.4 mm) Executive (184.2 mm x 266.7 mm) Oficio (216.0 mm x 317.0 mm) Brazil Oficio (216.0 mm x 355.0 mm) Mexico[...]

㻝㻥㻟㻌㻛㻌㻞㻝㻥[...]

0HWJ- 04K Consumables The following is a guide to the estimated replacement time for the consumables used in this machine. Purchase consumables at yo ur local authorized Canon dealer. Observe safety and health precautions when storing and handling consumables ( Consumables ). Depending on the installation environment, printing paper size, or docume[...]

0HWJ- 007 Manuals Included with the Machine The manuals listed below are included with the machine. Refer to them as necessary. Getting Started Read this manual first. It contains easy to understand explanations of everything you need to do to set up the machine, from removing the packing materials to configuring the settings. It also explains basi[...]

0HWJ- 04L Using the e- Manual The e-Manual is a manual that can be viewed on your computer. It describes all of the functions of the machine. You can search for information about what you want to do, or enter a keyword to quickly find the page you are looking for. You can use the e -Manua l by installing it on your computer, or start the e-Manual d[...]

0HWJ- 04R Installing the e- Manual Install the e- Manual on your computer by using the CD -ROM/DVD -ROM that comes with the machine. Insert the User Software CD -ROM/DVD -ROM into the drive on the computer. Click [Custom Installation]. If the above screen does not appear Displaying the [CD - ROM/DVD - ROM Setup] Screen If [AutoPlay] is displayed, c[...]

If you want to change the installation destination, click [Browse] and select your desired location. The installation begins. Click [Exit]. Click [Next] [Exit]. Viewing the e- Manual Double- click the shortcut icon of the e -Manual on the desktop. 5 6 7 㻝㻥㻤㻌㻛㻌㻞㻝㻥[...]

If a security warning message appears Click [Allow blocked content]. Viewing the e - Manual Directly from the CD-ROM/DVD - ROM 1 Insert the User Software CD - ROM/DVD - ROM into the drive on the computer. If the [CD-ROM/DVD -ROM Setup] screen does not appear Displaying the [CD - ROM/DVD - ROM Setup] Screen If [AutoPlay] is displayed, click [Run MIn[...]

0HWJ- 04S Uninstalling the e- Manual You can remove the e -Manual from the computer to restore the computer to the same state it was in before the e -Manual was insta lled. Insert the User Software CD -ROM/DVD -ROM into the drive on the computer. Click [Start Software Programs]. If the above screen does not appear Displaying the [CD - ROM/DVD - ROM[...]

Click [Back] [Exit]. 6 㻞㻜㻝㻌㻛㻌㻞㻝㻥[...]

0HWJ- 04U Screen Layout of the e- Manual The e-Manual is divided into different screens, and the content of each screen varies. Top Page This page appears when the e- Manual is started. Canon Click to return to the top page from any other page. [Contents] tab/[Search] tab Click to toggle the display between the [Contents] tab and [Search] tab. Cont[...]

This page provides a variety of practical examples of ways to use the machine. Click / / to toggle the display of practical examples by category, or click the sliding display for more information about each category. The sliding display can be stopped by moving the pointer onto it. Feature Highlights [Quick Help]/[Troubleshooting]/[Maintenance] Cli[...]

Chapter icons and topic titles are displayed in this tab. / The [Contents] tab can be widened and narrowed. [Expand All]/[Collapse All] Click [Expand All] to display all of the subsections of all topics. Click [Collapse All] to close all of the subsections of all the topics. Chapter icons Click a chapter icon to navigate to the top of the correspon[...]

This displays pages that contain the specified keywords. From the results, locate the page you are looking for and click the topic title of the page. If the results cannot be displayed on one page, click / or a page number to display the results on the corresponding page. Site Map This page displays the titles of all topics in the e -Manual. Chapte[...]

0HWJ- 04W Viewing the e- Manual Marks Cautions regarding safety, restrictions and cautions regarding the handling of the machine, useful tips, and other information are indicated using the marks below. Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always [...]

0HWJ- 04X Other This section describes basic Windows operations and includes disclaimers, copyright information, and other information. 㻞㻜㻣㻌㻛㻌㻞㻝㻥[...]

0HWJ- 04Y Basic Windows Operations Displaying [Computer] or [My Computer] Displaying the Printer Folder Enabling [Network discovery] Displaying Shared Printers in the Print Server Displaying the [CD - ROM/DVD - ROM Setup] Screen Printing a Test Page in Windows Checking the Bit Architecture Checking the Printer Port Checking Bidirectional Communicat[...]

Displaying Shared Printers in the Print Server Open [Windows Explorer] or [File Explorer]. Windows XP/Vista/7/Server 2003/Server 2008 [Start] select [All Programs] or [Programs] [Accessories] [Windows Explorer]. Windows 8/Server 2012 Right -click the lower -left corner of the screen select [File Explorer]. Select a print server from [Network] or [M[...]

In the [General] tab, click [Print Test Page]. Windows prints the test page. Checking the Bit Architecture If you are not sure whether your computer is running 32 -bit or 64- bit Windows, follow the procedure below to check. Display [Control Panel]. Windows Vista/7/Server 2008 [Start] select [Control Panel]. Windows 8/Server 2012 Right -click the l[...]

Checking the Printer Port Display the printer folder. Displaying the Printer Folder Right-click the icon of the machine and click [Printer properties] or [Properties]. In the [Ports] tab, check that the port is selected correctly. If you are using a network connection and have changed the machine's IP address (LBP6030w) If the [Description] of[...]

Display the printer folder. Displaying the Printer Folder Right-click the icon of the machine and click [Printer properties] or [Properties]. In the [Ports] tab, check that the [Enable bidirectional support] check box is selected. Checking the SSID to Which Your Computer Is Connected If your computer is connected to a wireless LAN network, click , [...]

0HWJ- 056 For Mac OS Users Your machine may have not come with a driver for Mac OS depending on when you purchased the machine. The drivers are uploaded t o the Canon website when they become needed. Check the operating system of your computer and download the appropriate driver from the Canon website. For the driver installation procedure and how [...]

0HWJ- 050 Notice Third Party Services and Software Third Party Software (PDF) You need Adobe Reader/Adobe Acrobat Reader to view files in the PDF format. If Adobe Reader/Adobe Acrobat Reader is not installed on your system, download the reader from the Adobe System's web site and install it. Product Name Safety regulations require the product&[...]

International ENERGY STAR Program As an ENERGY STAR Partner, Canon Inc. has determined that this product meets the ENERGY STAR Program for energy efficiency. The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the de[...]

Postage Stamps (canceled or uncanceled) Immigration Papers Identifying Badges or Insignias Internal Revenue Stamps (canceled or uncanceled) Selective Service or Draft Papers Bonds or Other Certificates of Indebtedness Checks or Drafts Issued by Governmental Agencies Stock Certificates Motor Vehicle Licenses and Certificates of Title Copyrighted Wor[...]

Suomi [Finnish] CANON INC. vakuuttaa täten, että AW-NM383 -laite on direktiivin 1999/5/ EY oleellisten vaatimusten ja sitä koskevien direktiivin muiden ehtojen mukainen. Svenska [Swedish] Härmed intygar CANON INC. att denna AW- NM383 står i överensstämmelse med de väsentliga egenskapskrav och övriga relevanta bestämmelser som framgår av [...]

Ö×ØÙÚÛÝÞß àâßÞ [Bulgarian]    ï÷Ú ï  ïÛùó÷Úìà  ýïûà  óÚ Ýà ßâúïØâ÷Ú ÷   ;  ¼;¼  ;½ ;  ;  ;¬; ¬¯; ;  ;  ;  Ï;   ¼;  Ï; ½  ; ; IS, IT, LI, LT, LU, LV, MT, N[...]

0HWJ- 051 Office Locations CANON INC. 30 -2, Shimomaruko 3 - chome, Ohta -ku, Tokyo 146 -8501, Japan CANON MARKETING JAPAN INC. 16 -6, Konan 2 -chome, Minato -ku, Tokyo 108- 8011, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD. 15F Jinb[...]

㻝㻌㻛㻌㻡㻟[...]

Introduction 3 System Requirements 4 Installing 5 Installing from the Supplied CD -ROM/DVD- ROM 6 Installing after Downloading from the Canon Website 13 Installing to Use WSD 17 Setting Up a Print Server 22 Configuring Settings on the Print Server Computer 23 Installing Drivers via the Print Server (Client Settings) 26 Updating and Uninstalling 27 [...]

0JAY- 000 Introduction This Installation Guide mainly explains how to install a printer driver and how to set up a print server. System requirements for installation of printer drivers System Requirements Installing This section explains how to install a printer driver and how to set up the printer so that it is ready to print. Installing Setting U[...]

0JAY- 001 System Requirements The following system environment is required to install printer drivers. OS Windows XP Windows Vista Windows 7 Windows 8 Windows 8.1 Windows Server 2003 Windows Server 2008 Windows Server 2008 R2 (64 -bit version only) Windows Server 2012 (64 - bit version only) Windows Server 2012 R2 (64 -bit version only) Computer A [...]

0JAY- 005 Installing This section explains how to install a printer driver on your computer and how to set up the printer so that it is ready to print. The printer driver is software that you need to use the printer. Read this section and install the printer driver correctly. Installing from the Supplied CD - ROM/DVD - ROM Install the printer drive[...]

0JAY- 007 Installing from the Supplied CD- ROM/DVD - ROM The order of operations in an Easy Installation is "Configure network settings" "Install the printer driver" "Install the e -Manual." If you are connecting the printer and a computer via wireless LAN, read Things to Check before Starting before starting. If you a[...]

Read the License Agreement and click [Yes] to agree. Configure the network settings. Wireless LAN Connection 1 Select [Wireless LAN Connection], and click [Next]. 2 Follow the on - screen instructions to configure the network settings. If there is something you do not understand Click [Useful Tips] at the bottom left of the screen to display troubl[...]

USB Connection 1 Select [USB Connection], and click [Next]. 2 Click [Next]. Install the printer driver. Wireless LAN Connection 1 Select [Standard], select the [Reactivate Printers in the Sleep Mode and Search] check box, and click [Next]. If you are using the printer in an IPv6 environment, click [Detailed Settings] select [Standard TCP/IP Port] c[...]

USB Connection If the [IPv6 Devices] tab is not displayed Return to the previous screen, and click [Detailed Settings] select [Standard TCP/IP Port]. If the printer that you want does not appear in [Printer List] Problems with the Wireless LAN Connection 3 Select the [Set Printer Information] check box, and click [Next]. 4 Set the printer informati[...]

Install the e -Manual. If you selected [Custom Installation], proceed to step 10. 1 Click [Install]. If you want to change the install destination, click [Browse] and select it. Installation of the e-Manual starts. 2 Click [Exit]. Read the information in the following screen carefully, select [Accept] or [Do Not Accept], and click [Next]. 1 Select [...]

If you select [Accept], the Product Extended Survey Program is installed. The Product Extended Survey Program is a program to send basic information related to installation and usage of the printer to Canon every month for 10 years. It does not send any other information, including your personal information. You can uninstall the Product Extended S[...]

If the e- Manual has been installed correctly, a shortcut icon for the e -Manual will be displayed on the desktop. However, the icon is not displayed if you selected [Custom Installation]. If the icon is not displayed Uninstall the printer driver ( Uninstalling Printer Drivers ) and repeat the setup from the beginning. * 㻝㻞㻌㻛㻌㻡㻟[...]

0JAY- 009 Installing after Downloading from the Canon Website Install the printer driver after downloading the latest version from the Canon website. Log on to the computer with an administrator account. Download the printer driver from the Canon website (http://www.canon.com/). For more information about how to download the printer driver, see the[...]

1 Select [Standard], select the [Reactivate Printers in the Sleep Mode and Search] check box, and click [Next]. If you are using the printer in an IPv6 environment, click [Detailed Settings] select [Standard TCP/IP Port] click [OK]. About [Detailed Settings] You can select the port type. [MFNP Port] (only for IPv4 environment) This is a port that e[...]

USB Connection 4 Set the printer information as necessary, and click [Next]. [Printer Name] Change the printer name as necessary. [Set as Default] Select the check box if you want to use your printer as your default printer. [Use as Shared Printer] Select the check box if you want to share the printer (using the computer where you are performing th[...]

Select the [Restart My Computer Now] check box, and click [Restart]. Checking the Results of the Installation If the printer driver has been installed correctly, an icon for the installed printer will be displayed in the printer folder ( Displaying the Printer Folder ). If the icon is not displayed Uninstall the printer driver ( Uninstalling Printe[...]

0JAY- 00A Installing to Use WSD If you are using Windows Vista/7/8/Server 2008/Server 2012, you can print by using the WSD (Web Services on Devices) protocol. If you want to use WSD, first install the printer driver and then add a network printer. Installing a Printer Driver Adding a Network Printer Log on to the computer with an administrator acco[...]

Click [Browse]. Specify the folder where the printer driver is stored, select the Inf file, and click [Open]. Specify the folder where the printer driver is stored as follows. 32 - bit operating system Specify [UFRII] [uk_eng] [32BIT] [Driver] folders of the CD -ROM/DVD -ROM or downloaded file. 64 - bit operating system Specify [UFRII] [uk_eng] [x6[...]

Change the printer name as necessary, and click [Next]. The installation starts. Select [Do not share this printer], and click [Next]. If you want to share the printer, make sharing settings for the printer added with Adding a Network Printer . ( Configuring Settings on the Print Server Computer ) Click [Finish]. An icon for the installed printer i[...]

Open the network folder. Windows Vista/Server 2008 [Start] select [Network]. Windows 7/Server 2008 R2 [Start] [Computer] select [Network]. Windows 8/Server 2012 Right -click the lower -left corner of the screen [File Explorer] select [Network]. Right-click the newly added printer icon, and click [Install]. Installation for using WSD is complete whe[...]

㻞㻝㻌㻛㻌㻡㻟[...]

0JAY- 00C Setting Up a Print Server You can lessen the burden on computers that request printing services by setting up a print server. You can also use the print server to install printer drivers on other computers, so that users of those computers do not need to install the printer driver from the CD - ROM/DVD -ROM. Configuring Settings on the Pr[...]

0JAY- 00E Configuring Settings on the Print Server Computer Configure printer sharing settings on the computer that you want to use as the print server. The following procedure assumes that you have already installed the printer driver on the computer that you plan to use as the print server. If you have not installed the printer driver already, se[...]

During the procedure explained in Installing Drivers via the Print Server (Client Settings) , this step is necessary if you want to use the print server to install printer drivers on computers that use different processor versions (32 -bit or 64-bit) of the operating system. 1 Click [Additional Drivers]. 2 Select the additional drivers, and click [[...]

Click [OK]. Setting Up a Print Server during Printer Driver Installation If you are using a printer connected by wireless LAN, you can set up a print server at the time when you install the printer dr iver. To set the computer onto which you are installing the print driver as a print server, select [Use as Shared Printer] in the [Printer I nformati[...]

0JAY- 00F Installing Drivers via the Print Server (Client Settings) You can use the print server to install printer drivers for a shared printer on other computers (clients) on the same network. Because the printer drivers are installed via the print server, users of the other computers do not need to use the printer's CD - ROM/DVD -RO M. Log [...]

0JAY- 00H Updating and Uninstalling This section explains how to update and uninstall printer drivers. It also explains how to uninstall the Product Extended Survey Program. Updating You can update installed printer drivers to the latest versions. Updating Uninstalling When you no longer need installed printer drivers or the Product Extended Survey[...]

0JAY- 00J Updating Proceed as follows to download the latest printer driver from the Canon website and update the printer driver installed on your computer. Log on to the computer with an administrator account. Download the printer driver from the Canon website (http://www.canon.com/). For more information about how to download the printer driver, [...]

Check the printer information in [Printer List for Driver Installation], and click [Start]. Updating of the printer driver starts. Select [Restart My Computer Now], and click [Restart]. 9 10 㻞㻥㻌㻛㻌㻡㻟[...]

0JAY- 00K Uninstalling When you no longer need installed printer drivers or the Product Extended Survey Program, you can uninstall them to delete them from your computer. Uninstalling Printer Drivers Uninstalling the Product Extended Survey Program Log on to the computer with an administrator account. Display [Programs and Features] or [Add or Remo[...]

Select the printer that you want to uninstall, and click [Delete]. If you click [Cleanup], then all files, directory information and other data related to all printers are deleted, not only for the selected printer but for all printers in the list. Normally you should use [Delete] to uninstall printer drivers. Click [Cleanu p] when no printer is di[...]

Click [OK]. 4 㻟㻞㻌㻛㻌㻡㻟[...]

0JAY- 00S Troubleshooting If you encounter problems during installation of the printer driver, see the following sections before contacting Canon. Problems with the Wireless LAN Connection Problems with the USB Connection Problems via the Print Server The printer that you want does not appear in [Printer List]. Click [Search Again] to search for th[...]

Reset the wireless LAN settings. Configuring Wireless LAN Network Settings When you need to manually set up the connection If the wireless router is set up as described below, enter the required information manually. The stealth function is enabled. ANY connection refusal is enabled. The WEP key number to use is set to a number from 2 to 4. The aut[...]

Enabling [Network discovery] 㻟㻡㻌㻛㻌㻡㻟[...]

0JAY- 00U Deleting the USB Class Driver Delete the USB class driver when it is not possible to install the printer driver correctly when using a USB connection. Note t hat even if you delete the USB class driver, it will be installed again automatically when you connect the printer and your computer with a USB cable. Connect the printer and your co[...]

LINKS Connecting via USB 㻟㻣㻌㻛㻌㻡㻟[...]

0JAY- 00L Appendix The Appendix provides information you should know, such as how to connect the printer to your computer, how to use the Installa tion Guide, disclaimers, and copyright information. It also explains how to start the MF/LBP Network Setup Tool manually. Refer to i t as necessary. 㻟㻤㻌㻛㻌㻡㻟[...]

0JAY- 002 Connecting the Printer to a Computer There are two ways to connect the printer to a computer: "via wireless LAN," and "via USB." Select the connection method that b est suits your communication environment and devices. Connect the printer to a router via wireless communications. Connecting via Wireless LAN Connect the [...]

0JAY- 003 Connecting via Wireless LAN Connect the printer to a computer via a wireless LAN router. The printer and the router are connected wirelessly (via radio waves), so you do not need a LAN cable. To make wireless LAN settings, use the MF/LBP Network Setup Tool from your computer. Things to Check before Starting Configuring Wireless LAN Networ[...]

If there is something you do not understand Click [Useful Tips] at the bottom left of the screen to display troubleshooting tips. 㻠㻝㻌㻛㻌㻡㻟[...]

0JAY- 004 Connecting via USB Connect the printer to a computer with a USB cable. Connect the flat connector of the USB cable ( ) to the computer, and connect the square connector ( ) to the printer. If your printer does not come with a USB cable, you will need to provide your own cable separately. Make sure that the USB cable you use has the follow[...]

0JAY- 00R MF/LBP Network Setup Tool The MF/LBP Network Setup Tool is a utility that allows you to configure initial network settings by following instructions on the screen. The Tool starts automatically when you install a printer driver from the User Software CD -ROM/DVD -ROM. If you want to start it alone manually, you can start it from the User [...]

The MF/LBP Network Setup Tool is included among the files that you download to install a printer driver. Start by downloading t he printer driver file, which contains the printer driver and associated files, from the Canon website (http://www.canon.com/). Unzip the downloaded file. Double - click "CNAN1STK.exe" in the [Network_Setting_Too[...]

0JAY- 00W Using the Installation Guide The Installation Guide is a manual that can be viewed on your computer. It provides information about the installation of printer drivers. You can find pages quickly by searching for what you want to do or by entering keywords. How to Find the Topic You Are Looking For You can find the page you are looking for[...]

0JAY- 00X Screen Configuration of the Installation Guide The Installation Guide is divided into different screens, and the content of each screen varies. Top Page This page appears when the Installation Guide is started. Canon logo Click to return to the top page from any other page. [Contents] tab/[Search] tab Click to toggle the display between t[...]

[Contents] Chapter icons and topic titles are displayed in this tab. / The [Contents] tab can be widened and narrowed. [Expand All]/[Collapse All] Click [Expand All] to display all of the subsections of all topics. Click [Collapse All] to close all of the subsections of all the topics. Chapter icons Click a chapter icon to navigate to the top of th[...]

[Enter keyword(s) here] Enter one or more keywords and click to display search results in a results list. You can enter a phrase to find pages that contain all of the words in the phrase. To find an exact phrase, enclose it in double quotation marks. [Search options] Click to specify search conditions such as the scope of the search and case sensit[...]

0JAY- 00Y Viewing the Installation Guide Marks Restrictions and cautions regarding the handling of the printer, useful tips, and other information are indicated using the mar ks below. Indicates operational requirements and restrictions. Be sure to read these items carefully to operate the printer correctly and avoid damage to the printer or proper[...]

0JAY- 010 Other This section describes basic Windows operations and includes disclaimers, copyright information, and other information. 㻡㻜㻌㻛㻌㻡㻟[...]

0JAY- 011 Basic Windows Operations Displaying the Printer Folder Enabling [Network discovery] Displaying the [CD - ROM/DVD - ROM Setup] Screen Checking the Bit Architecture Displaying [Programs and Features] or [Add or Remove Programs] Displaying [Device Manager] Displaying the Printer Folder Windows XP Professional/Server 2003 [Start] select [Prin[...]