Capresso 454 manual

Model #454 Cof feeTEAM ™ S 10-cup, 50 oz. Digital Cof fee Maker / Bur r Grinder Combination • Operating Instructions • W arranty • Mail-in or Fax-in Pr oduct Registration[...]

IMPOR T ANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fir e, electric shock and injury to persons, do not immerse cord, plugs, or body of machine in water or other liqui[...]

1a. W elcome and Thank Y ou ....................................................4 1b. How to reach Capr esso ......................................................4 2. Important information about coffee beans and the built-in Burr Grindcer ..............................................4 2a. Storing coffee beans in the fr eezer? ....................[...]

A TTENTION: T races of Coffee In order to ensur e proper functioning, your CoffeeTEAM S has been calibrated and tested with coffee beans. As a r esult, some traces of coffee may r emain in your machine. 1a. W elcome and Thank Y ou Thank you for choosing this unique CAPRESSO product. Y our new CoffeeTEAM S works differ ently than individual coffee m[...]

• Do not add any liquid flavorings or syrups to the beans. • If you like flavored beans we r ecommend buying liquid flavor- ings at your local coffee stor e. Add a few drops into the carafe before or after br ewing. 2e. Stones And Beans Every coffee specialty stor e will tell you that occasionally small stones can be found in between coffee bea[...]

USER COMPONENTS A Bean Container Lid B Bean Container C Fineness Selector Dots (not shown) D Screw for Feeder Channel Cover E Feeder Channel Cover with window F Feeder Channel G Operating Panel and Display G1 Grind Amount Indicator G2 Clock/Timer G3 Strength Indicator G4 On/Off Button with r ed light G5 2–4 cup brew cycle selector with green ligh[...]

4. Equipment The CoffeeTEAM S (#454) comes with: a. this instruction book (includes warranty and Capresso pr oduct registration) b. an order form for parts and accessories c. one measuring scoop d. one glass carafe with lid e. one GoldT one filter , size 4 f. one cover lid for the filter holder insert g. filter holder insert h. water filtration con[...]

7. Preparing the machine 7.1 Before First Use a. After unpacking clean all loose parts with warm water and make yourself familiar with the differ ent functions. b. After reading the instructions, brew 3 cups of water to clean all internal parts and to activate the charcoal filter . 7.2 The Display When you plug in the coffee maker , the LCD display[...]

b. Push the "prog" button (G10). The saucer blinks. The display will read "AM 12:00" and shows the number "10" in bold. c. Push and hold the”h”-button (G8) to program the hour at which you would like to make coffee later . Push and hold the “m”-button (G9) to program the minutes at which you would like to make [...]

7.6 Flashing LCD Display • If you unplug the machine for more than 10 seconds and then plug it in again, the LCD display will flash. • If you did not unplug the machine and the LCD display flashes, it indicates that the electrical power was interrupted for mor e than 10 seconds. Y ou have to set the clock and the tim er a nd grinder settings ag[...]

find a differ ence in taste in your coffee when using the water filtra- tion system. However , most tap water is treated with chlorine. The water filter cartridge removes up to 82% of the chlorine found in your tap water . Initial Preparation: • Unscrew the bottom of the filtration container (K) and place the cartridge (flat side upwards) inside.[...]

7.9 Filling The W ater Container Open the water container lid (I) and pour the desired amount of fresh, cold water thr ough the filtra- tion container (K). Note : Using the cup graduation on the glass carafe, always pour approximately one cup of water more into the water container to compensate for water lost during the brewing pr ocess. Maximum am[...]

7.11 Cover Lid The cover lid (L) minimizes static coffee particles clinging to the out- side of the filter holder . • Open the water container lid (I). • Make sure that the filter holder insert and the GoldT one filter (or your filter paper) are inserted in the filter holder (O). • Place the cover lid on top of the filter holder insert (M) so[...]

coffee could flow upwar ds into the feeder channel. • Push the on/off button (G4) until the red light turns on. The grinder will start grinding and the coffee will fall into the filter . Through the window in the feeder channel cover you can actually see how the ground coffee moves forward. After the grinding is finished, the filter holder will a[...]

this case immediately replace carafe and let all the coffee flow into the carafe. (This happens when the mesh of the GoldT one filter is clogged up causing coffee grounds to over -flow . If you use filter paper , use the correct size (size 4), and check if there was a hole in the bottom of the filter paper). T o clean the drip stop, see page 17, ch[...]

9. Grinding and Brewing Cof fee Later • Program the timer and grinder setting as described in chapter 7.5, page 8. • Fill beans into the bean container (see page 10, chapter 7.7). • Fill the desired amount of water into the machine (see page 12, chapter 7.9). • Make sure the filter holder insert, GoldT one filter (or paper filter) and cover[...]

10c. Filter Holder Insert (M)/ Drip Stop (N): Clean the filter holder insert and the drip stop under run- ning water . Check to make sure that the drip stop closes com- pletely under running water also. 10d. Bean Container (A): When the bean container is empty , use a dry cloth to wipe off any oil deposits. Never pour any liquid into the bean conta[...]

b. With a coin, turn the screw on top of the feeder channel a quarter turn counter clockwise to the 12 o’clock position. c. Firmly lift the feeder channel cover upwards and to the right as shown, and set aside. Note: The feeder channel cover will make a "snapping" sound when it is lifted from the machine. d. Move the filter holder under[...]

g. Push the manual release button upwards. The filter holder will swing back to the right. Manual Release Button h. Wipe the inside of the feeder channel cover with a dr y cloth (do not immerse in water). i. Replace the feeder channel cover and turn the screw a quarter turn clockwise to the 3 o’clock position. j. Empty the GoldT one filter or pap[...]

12. F AQ (T echnical Questions) Q1. I accidentally locked the filter holder underneath the grinder . What do I do? A. Push the Manual Release Button upwards (see page 19). Q2. There is no coffee coming out of the grinder . It seems as though the coffee is completely clogged inside the grinder . What do I do? A. Please follow the steps outlined in c[...]

tainer (as well as you can), remove the filter holder insert and GoldT one filter , open the water container lid and tur n the machine upside down over a sink. Y ou need to reset all settings. Q12. When I unplug the machine, the display shows random symbols for about 15 seconds, then turns off. Is that normal? A. Y es. The condenser of the display [...]

14. ONE YEAR LIMITED WARRANTY This warranty covers your CAPRESSO machine, model #454. This warranty is in effect for one year fr om the date of the first consumer purchase and is limited to the United States of America. This warranty covers all defects in materials or workmanship (parts and labor) including UPS ground trans- portation for both ways[...]

cut along dotted line CAPRESSO Cof feeTEAM S #454 Pr oduct Registration Please complete this registration after you have used your machine for a few days. Y our information will help us to better serve you in the futur e. Y ou can also register thr ough our website www .capr esso.com Thank you for buying from CAPRESSO. Please print clearly Last Nam[...]