Casio HK1223 manual

i Mobile Laptop 900™ Pentium M Model (Model # HK1223) Motorola, Inc. All right s reserved Owner ’ s Manual R01 Part No.: DDN 7415[...]

ML900 Operation Manual (Pentium M Model # HK1223) Part Number:799001147001 7990 0114 3001 R01 (April 2006)[...]

TRADEMARKS All brand and product names are trademarks or registered trademarks of their respective companies. NOTE Information in this manual is subject to change without notice. COPYRIGHT Copyright © 2005 Motorola Inc. All rights reserved. No part of this manual may be transmitted, stored in a retrieval sy stem, or translated into any language or[...]

i Regulations Information Class B Regulations USA Federal Communications Com mission Radio Frequency Interference Statement NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference[...]

ii • Consult the dealer or an experienced radio/TV technician for help. Any changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Please note: The use of a non-shielded interface cable with this equipment is prohibited. Wireless LAN Module Statement FCC CAUTION: This device[...]

iii Canada Radio Frequency Interference Requirements To prevent radio interference to the licensed service, this device is intended to be operated indoors and away from windows to provide maximum shielding. Equipment (or its transmit antenna) that is inst alled outdoors is subject to licensing. Pour empêcher que cet appareil cause du br ouillage a[...]

iv Product Safety and RF Exposure Information Caution BEFORE USING THIS RUGGEDIZED LA PTOP , READ THIS SECTION WHICH CONTAINS IMPORTANT OPERATING IN STRUCTIONS FOR SAFE USAGE AND RF ENERGY AWARENESS AND CONTROL INFORMATION FOR COMPLIANCE WITH RF ENERGY EXPOSURE LIMITS IN APPLICABLE NATIONAL AND INTERNATIONAL STANDARDS. Compliance with RF Energy Exp[...]

v Medical Devices Pacemakers Keep the antennas of this data terminal at least 8 inches or 20cm away from any person’s body. Along with ensuring compliance with the RF energy exposure limits (as instructed in the RF Energy Exposure section previously ), this separation distance meets or exceeds the distance recommendation of pacemaker manufacturer[...]

vi Potentially Explosive Atmospheres Turn off your ruggedized laptop prior to en tering any area with a potentially explosive atmosphere. Do not remove, install, or charge batteries in s uch areas. Sparks in a potentially explosive atmosphere can cause an explosion or fire resulting in bodily injury or even death. The areas with potentially expl os[...]

vii LICENSE AGREEMENT MOTOROLA, INC. (“MOTOROLA”) IS WILLING TO LICENSE THE SOFTWARE EMBEDDED IN THE ENCLOSED PRODUCT (THE “SOFTWARE”) TO YOU ONLY ON THE CONDITION THAT YOU ACCEPT ALL OF THE TERMS CONTAINED IN THIS LICENSE AGREEMENT (“AGREEMENT”). PLEASE READ THE TERMS CAREFULLY. YOUR USE OF THE PRODUCT WITH THE EMBEDDED SOFTWARE WILL I[...]

viii 2.5 You shall not export, re-export, rese ll, ship or divert or cause to be exported, re-exported, resold, shipped, or diverted, directly or indirectly, the Software under this Agreement. Section 3 TITLE AND OWNERSHIP Title to all copies of Software will not pass to You at any time and remains vested exclusively in Motorola or th e copyright o[...]

ix Section 5 RIGHT TO USE MOTOROLA’S NAME You shall not, during the term of this Agreement or thereafter, use any trademark of Motorola, or any word or sy mbol likely to be confused with any Motorola trademark, either alone or in any combination with another word or words. Section 6 PAYMENT The rights granted hereunder are conti ngent upon paymen[...]

x Section 10 LIMITATION OF LIABILITY MOTOROLA’S TOTAL LIABILITY UNDER THIS AGREEMENT FOR DAMAGES SHALL NOT EXCEED THE TOTAL AMOUNT PAID BY YOU FOR THE SOFTWARE UNDER THIS AGREEMENT. IN NO EVENT WILL MOTOROLA BE LIABLE FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE DAMAGES. Section 11 U.S. GOVERNMENT If You are a unit or agent of th[...]

xi The Software may contain one or more ite m s of third-party software supplied by other third-party suppliers. The terms of this Agreement govern Your use of any third-party software UNLESS A SEPARATE THIRD-PARTY SOFTWARE LICENSE IS INCLUDED WITH THIS PACKAGE, IN WHICH CASE YOUR USE OF THE THIRD-PARTY SOFTWARE WILL THEN BE GOVERNED BY THE SEPARAT[...]

xii If the affected product is being purchased pursuant to a written Communications System Agreem ent signed by Motorola, the warranty contained in that written agreement will apply. Otherwise, the following warranty applies. I. WHAT THIS WARRANTY COVERS AND FOR HOW LONG: Motorola Inc. or if applicable, Motorola Canada Limited ("Motorola"[...]

xiii warranty. Because each system which may use the Product is unique, Motorola disclaims liability for ra nge, coverage, or operation of the system as a whole under this warranty. II. GENERAL PROVISIONS: This warranty sets forth the full extent Motorola’s responsibilities regarding the product. Repair replacement or Refund of the purchase price[...]

xiv MOTOROLA DISCLAIMS ALL OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED INCLUDING THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MOTOROLA BE LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE OF PRICE THE PRODUCT FOR ANY LOSS OF USE LOSS OF TIME, INCONVE-NIENCE, COMMERCIAL LOSS, LOST [...]

xv I) A Product which, due to illegal or unauthorized alteration of the software/firmware in the Product, does not function in accordance with Motorola’s published specifications or with the FCC type acceptance labeling in effect for the Product at the time the Product was initially distributed from Motorola. J) Scratches or other cosmetic damage[...]

xvi States patent, that such purchaser will permit Motorola, at its option and expense, either to procure for such purchaser the right to continue using the product or its parts or to replace or modify the same so that it becomes non-infringing or to grant such purchaser a credit for the Product or its parts as depredated and accept its return. The[...]

xvii About the Battery Caution Texts Concerning Lithium Batteries DANISH A DVARSEL ! Lithiumbatteri – Eksplosionsfare ved fejlag tig håndtering. Udskiftning må kun ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til leverandøren. NORWEGIAN A DVARSEL : Eksplosjonsfare ved feilaktig skifte av batteri. Benytt samme ba[...]

xviii FRENCH A TTENTION : II y a danger d’explosion s’il y a remplacement incorrect de la batterie. Remplacer uniquement avec une batterie du même type ou d’un type équivalent recommandé par le constructeur. Mettre au rebut les batteries usagées conformément aux instructions du fabricant. Attention (for USA Users) The product that you ha[...]

xix 4. Connect the adapter to a proper power source. The voltage requirements are found on the product case and/or packaging. 5. Do not use the adapter if the cord becomes damaged. 6. Do not attempt to service the unit. There are no s erviceable parts inside. Replace the unit if it is damaged or exposed to excess moisture.[...]

xx Table of Contents Preface ...................................................................................... vii Chapter 1 Getting Started ..................................................... 1-1 Getting the Computer Running ................................................ 1-2 Unpacking ......................................................[...]

xxi Numeric Keypad ................................................................ 2-5 Euro Symbol ...................................................................... 2-6 Windows Keys ................................................................... 2-6 Function Keys .................................................................... 2-6 Fn [...]

xxii Power-Saving Tips ................................................................... 3-9 Chapter 4 Expanding Y our Comput er.................................. 4-1 Connecting an External Monitor.............................................. 4-2 Connecting a USB Device .......................................................4-3 Connecting a Seri[...]

xxiii Battery Pack Guidelines ..................................................... 7-4 When Traveling ....................................................................... 7-5 Chapter 8 Troubl eshooting ................................................... 8-1 Preliminary Checklist .............................................................. 8-2[...]

[...]

xxv Preface This manual contains information that will help you operate the computer. It is divided into 8 chapters and 3 appendices. Chapter 1, Getting Started , takes you through the process of setting up the computer and identifying its external components. Chapter 2, Operating Your Computer , tells you how to use the computer’s components and[...]

xxvi Appendix B, Fingerprint Recognition System , provides information on using the system’s fingerprint recognition system. Notational Conventions Throughout this manual, the following conventions are used to distinguish elements of text. NOTE: identifies additional information that requires special attention. CAUTION: identifies important infor[...]

CHAPTER 1 Getting Started Congratulations on purchasing this computer. This high performance notebook computer is especially designed for the practical applications of warehouses, automobiles, vehicles, public security, repairing, assisting the handicapped, and other demanding situations where conventional notebook computers just cannot measure up.[...]

1-2 Getting Started Getting the Computer Running This section guides you through the pr ocedures for getting the computer ready for operation. Unpacking After unpacking the shipping carton, you should find these standard items:  Notebook computer  Accessories: − AC adapter (100~240 VAC, 50/60 Hz ) − AC power cord (US/CE/UK/SA) − Battery[...]

Getting Started 1-3 NOTE: Power Supply Cord: (optional) Detachable, minimum 1.5 m long. Listed, rated minimum 125 V, 7 A, having a 2/18 AWG, type SVT flexible cord. One end terminates with a parallel blade, molded-on, attachments plug with a 7 A, 125 V (NEMA 1-15P) configuration; other end terminates with a molded-on appliance coupler. Alternative:[...]

1-4 Getting Started CAUTION:  When you disco nnect the AC adapter, disconnect from the electrical outlet first and then from the computer. A reverse pr ocedure may damage the AC adapter or the computer.  When unplugging the connector, always hold the plug head. Never pull on the cord. NOTE: When the AC adapter is connected, it also charges th[...]

Getting Started 1-5 3. Each time the computer is turned on, it performs a Power-On Self Test (POST), and the operating system such as Windows should start. Turning Off To turn off the computer safely , use the “Shut Down” command of your operating system. NOTE: There are other ways you can stop the computer so that you will be back to where you[...]

1-6 Getting Started Taking a Look at the Computer This section identifies the external components of the computer and briefly describes the function of each component. NOTE : Depending on the model you purchased, the appearance of your computer may not exactly be the same as those shown in this manual. Right-Side Components Ref Component Descriptio[...]

Getting Started 1-7 Left-Side Components Ref Component Description See Also  IR Transceiver C onnects an IrDA -com pliant device fo r wire less data transfer. P. 4-5  Bluetooth Transceiver (option) Connects a bluetooth-ca pabl e device f or wireless data transfer. P. 4-5  Microphone Connector Connects a n external m icrophone. P. 2-20  [...]

1-8 Getting Started Rear Components Ref Component Description See Also  DVI-I Port Connects an external monitor with a DVI interface. P. 4-2  Serial Port Connects a serial device, such as a n external modem . P. 4-4  Docking Port For connecting to a Port Replicator / car mount (both are available as an option).  Rear Cover Latch Locks t[...]

Getting Started 1-9 Front Components Ref Component Description See Also  Wireless Modem Antenna Serves as the antenna for the option a l wireless modem (RDLA P, GPRS, iDEN, and CDMA). P. 2-24  Stereo Speaker Set Sends out sound and voice from the computer. P. 2-19 Handle Allows you to carry your computer for an easy grip.   Wireless LAN[...]

1-10 Getting Started Bottom-Side Components Ref Component Description See Also  X-bay Module Antenna Connector Serves as the interface bet ween the system and antenna of the optional X- bay module.  DVD/Combo/ DVD Dual Drive Lock/ Unlock Switch Allows you to lock the D VD/ Combo/DVD Dual drive in place. P. 2-15  DVD/Combo/ DVD Dual Drive E[...]

Getting Started 1-11 Ref Component Description See Also  CPU Socket and Sealed CPU Cooling Fan Inside is the CPU of your computer and cooling fan to protect it from ove rheating.  Ventilation Openings Do not cover or block the ventilation openings for air circulat ion thus preve nting over heating.  Battery Pack Supplies power to your com [...]

1-12 Getting Started Top-open Components Ref Component Description See Also  Fingerprint Scanner Contains the fi nge rprint sensor. P. B-1  Keyboard Serves as the data i nput de vic e of t he com pu ter. P. 2-4  Power Button Turns the com puter power O N and OFF. P. 1-5[...]

Getting Started 1-13 Ref Component Description See Also Device Indicators Show the curre nt status of t he computer’s devices. Power on / Standby mode indicator P. 1-3 Hard disk driv e in-use indicator P. 2-13 Num Lock in dicator P. 2-6 Caps Lock in dicator P. 2-4  Scroll Lock in dicator P. 2-4  LCD Screen Displays the output of the compute[...]

1-14 Getting Started Where to Go from Here As your computer is ready for operation, you may want to do any of the following now: For this purpose… Do this… To know more about the co mputer… Go on to the next chapter. To install the operating system if your dealer has not already done so… See the operating system manual. To know more about t[...]

CHAPTER 2 Operating Your Computer This chapter provides information about the use of the computer. If you are new to computers, reading this chapter will help you learn the operating basics. If you are already a computer user but are new to notebook computers, you may choose to read only the parts containing information unique to your computer. Des[...]

2-2 Operating Your Computer Starting and Stopping the Computer There are a number of ways to start and stop the computer. Starting the Computer You always start the computer using the power button. A computer starts up with an operating system (OS) existing on the storage device such as the hard disk; or from a CD if you have the respective modules[...]

Operating Your Computer 2-3 To stop in this mode… Do this… To start up or resume again Hibernatio n Depending on your settings in Windows, you can place the c omputer in Hibernatio n mode by: • Closin g the display cover. • Pressing the power button Press the power button. If you choose to stop in Standby or Hibe rnation mode, you can retur[...]

2-4 Operating Your Computer Using the Keyboard Your keyboard has all the standard functions of a full-sized computer keyboard plus a Fn key added for specific functions. The standard functions of the keyboard can be further divided into four major categories:  Typewriter keys  Cursor-control keys  Numeric keys  Function keys Typewriter [...]

Operating Your Computer 2-5 Cursor-Control Keys NOTE: The word “cursor” refers to the indicator on the screen that lets you know exactly where on your screen anything you type will appear. It can take the form of a vertical or horizontal line, a block, or one of many other shapes. Numeric Keypad A 15-key numeric keypad is embedded in the t ypew[...]

2-6 Operating Your Computer Numeric keys facilitate entering of numbers and calculations. When Num Lock is on, the numeric keys are activated; meaning you can use these keys to enter numerals. NOTES:  When the numeric keypad is activated and you need to type the English letter in the keypad area, you can turn Num Lock off or you can press Fn and[...]

Operating Your Computer 2-7 Fn Key The Fn key, at the lower left corner of the keyboard, is used with another key to perform the alternative function of a key. The letter “Fn” and the alternative functions are identified by the color of blue on the keytop. To perform a desired function, first press and hold Fn , then press the other key. Hot Ke[...]

2-8 Operating Your Computer Key Description Switches the display output to one of the follow ing wh en an external device is connected. Upon booting the system with CRT: LCD LCD & CRT CRT Upon booting the system with DVI: LCD LCD & DVI DVI NOTES :  When in ful l screen DOS m ode, or when pla ying DVD or MPEG file, display switching is no[...]

Operating Your Computer 2-9 Using the Touchpad CAUTION: Do not use a sharp object such as a pen on the touchpad. Doing so may damage the touchpad surface. NOTES:  By default, the touchpad is disabled. Use the Fn + F7 hot keys to enable/disable this function. The touchpad indicator found on the keyboard panel glows red when it is disabled.  Fo[...]

2-10 Operating Your Computer Term Action Point Move your finger on the pad until the cursor points to the selection on th e screen. Click Press and release the left button. –or– Tap gently anywhere on the pad. Double- click Press and release the left bu tton twice in quick succession. –or– Tap twice on the pad rapidly. Drag and drop Press a[...]

Operating Your Computer 2-11 Configuring the Touchpad You may want to configure the touchpa d to suit your needs. For example, if you are a left-handed user, you can swap the two buttons so that you can use the right button as the left button and vise versa. You can also change the size of the on-screen pointer, the speed of the pointer, and so on.[...]

2-12 Operating Your Computer Using the Touchscreen (option) CAUTION: Do not use a sharp object such as a ballpoint pen or pencil on the touchscreen. Doing so may damage the touchscreen surface. The touchscreen is a touch-sensitive device that allows you to communicate with the computer by controlling the location of the pointer on the screen and ma[...]

Operating Your Computer 2-13 Using the Hard Disk Drive Your computer comes with a hard disk drive as drive C. A hard disk drive is a storage device with non-removable, rotating, magnetic storage platters inside it. It is where y our operating system and application software programs are stored. Your hard disk drive is a 2.5-inch IDE (Integrated Dri[...]

2-14 Operating Your Computer Using the DVD/Combo/DVD Dual Drive Depending on the model, your computer comes with a DVD, Combo, or DVD Dual drive located on the right side of the computer. This drive is usually configured as drive D. The drive uses removable 5.25-inch silver discs, which look like standard music CDs. It is an ideal medium to use for[...]

Operating Your Computer 2-15  The DVD/Combo/DVD Dual drive is classifi ed as a Class 1 laser product. This label is located on the DVD/Combo/DVD Dual drive. Installing the DVD/Combo/DVD Dual Drive To install the DVD/Combo/DVD Dual drive: 1. Insert the DVD/Combo/DVD Dual drive into the DVD drive bay located on the right side of the computer. 2. S[...]

2-16 Operating Your Computer Inserting and Removing a Disc Follow this procedure to insert or remove a disc. 1. Turn on the com puter. 2. Press the eject button and the DVD tray will slide out partially. Gently pull on it until it is fully extended. 3. To insert a disc, place down the disc in the tray with its label facing up. Slightly press the ce[...]

Operating Your Computer 2-17 Using the Video Features The video subsystem of your computer features: 12.1-inch Display:  12.1-inch TFT (Thin-Film Transistor) color LCD display with 1024 × 768 XGA (eXtended Graphics Array) resolution  64 MB integrated video memory  Simultaneous display on LCD and external monitor, which is useful when you [...]

2-18 Operating Your Computer NOTES:  Before using the dual view capab ility, the video driver supplied with your computer must be installed.  System enters Standby/Hibernation mode when the LCD is closed. If you want to use the computer with the LCD closed, set Do Nothing to the “When I close the lid of my portable computer” option in the[...]

Operating Your Computer 2-19 Using the Audio Features NOTES:  To take advantage of the enhanced audio capabilities, the audio driver supplied with your computer must be installed (see chapter 6 for details).  If you experience interference while recording, try lowering the microphone recording volume. The audio subsystem of your computer feat[...]

2-20 Operating Your Computer Connecting Audio Devices For higher audio quality, you can send or receive sound through external audio devices.  Microphone Connector ( ) can be connected to an external microphone for recording voice or sound.  Audio Output Connector ( ) can be connected to the line-in connector of powered speakers w ith built-i[...]

Operating Your Computer 2-21 Using the Communication Features Using the LAN NOTE for Windows 2000: To take advantage of the LAN feature, the LAN driver supplied with your computer must be installed. The internal 10/100Base-T Ethernet LAN (Local Area Network) module allows you to connect your computer to a network. It supports data transfer rate up [...]

2-22 Operating Your Computer Using the Wireless LAN (option) Depending on your model, an internal Mini PCI wireless LAN (WLAN) card may have been pre-installed by your computer manufacturer at the factory. This card allows you to access corporate networks or the Internet in a wireless environment. The WLAN features include:  Peer-to-Peer (Ad-Hoc[...]

Operating Your Computer 2-23 authentication used by the currently used profile. Refer to Security Setting for more information. CCX Version Version of the Cisco Compatible Extensions of this wireless connection. CCX TPC Cisco Co mpatible Extensions Power Levels. CCX Power Levels 0.2 0.4,1.0,6.3,100.0 Mw. Access Point MAC Address The Media Access Co[...]

2-24 Operating Your Computer WLAN card was provided by your dealer instead of the computer manufacturer, contact your dealer for the correct driver to use. It takes approximately 30 seconds for your computer to make a successful WLAN connection and approximately 10 seconds to disconnect. NOTE: The FAA (Federal Aviation Agency) has deemed it unsafe [...]

Operating Your Computer 2-25 3. Depending on the settings, you may be asked to enter a WEP key (refer to your Windows online help for more inform ation on setting a wireless network connection). Using the Modem NOTE: To take advantage of the modem feature, the modem driver supplied with your computer must be installed. The internal 56 K fax/data mo[...]

2-26 Operating Your Computer The modem interfaces to the equipment’s controller by using the data interface port. The protocol supported over this link is a Native Control Language (NCL). Although the modem has embedded software, it has built in application software. All application software must be separately installed and run from the device to[...]

Operating Your Computer 2-27 Using the GPS (option) Navigation and positioning are crucial to so many activities and yet the process has always been quite cumberso me. To try to figure out where you are and where you are going, you need GPS technolo gy. The Global Positioning System (GPS) is a worldwide radio-navigation system formed from a constel[...]

2-28 Operating Your Computer Using the MESH Modem (option) Motorola's MESH networking technology enables users to wirelessly access critical broadband applications seamlessly - anytime and anywhere. Whether utilizing predeplo yed infrastructure or an instant, adhoc broadband network formed with other users, Motorola's MESH networking tech[...]

Operating Your Computer 2-29 check with the manufacturers of other devices to determine their compatibility with your computer. NOTES:  There may be restrictions on using Bluetooth technology in some locations. Chec k with your local authorities or service provider.  Features using Bluetooth techn ology, or allowing such features to run in th[...]

CHAPTER 3 Managing Power Your computer operates either on external AC power or internal battery power. This chapter tells you how you can effectively manage power. To maintain optimal battery performance, it is important that you use the battery in the proper way. The topics in this chapter include:  What is an AC adapter  How to charge the b[...]

3-2 Managing Power AC Adapter CAUTION:  The AC adapter is designed for use with your computer only. Connecting the AC adapter to another device can damage the adapter.  The AC power cord supplied with your computer i s for use in the country where you purchased your computer. If you plan to go overseas with the computer, consult your dealer f[...]

Managing Power 3-3 Battery Pack The battery pack is the internal power source for the computer. It is rechargeable using the AC adapter. The operating time of a fully charged battery pack depends on how you are using the computer. When your appl ications often access peripherals, you will experience a shorter operating time. In low tem perature env[...]

3-4 Managing Power NOTE: The battery level may automatically lessen due to the self-discharge process (0.21% per day), even when the battery pack is fully charged (100 %). This happens no matter if the battery pack is installed in the computer. Initializing the Battery Pack You need to initialize a new battery pack before using it for the first tim[...]

Managing Power 3-5 Replacing the Battery Pack CAUTION:  There is danger of explosion if the battery is incorrectly replaced. Replace the battery only with the computer manufacturer’s optional battery packs. Discard used batteries according to the dealer’s instructions.  Do not attempt to disassemble the battery pack. If you often rely on [...]

3-6 Managing Power 5. Replace the battery pack compartment cover and secure the four screws. Battery Low Signals and Actions Battery Low occurs when the battery has approximately 10% (Windows default setting) of its charge remaining. The computer gives warning beeps or messages and the Battery Power Indicator ( ) blinks amber (orange) to alert you [...]

Managing Power 3-7 Power Management Your computer supports ACPI (Advanced Configuration and Power Interface) for power management. The po wer management feature allows you to reduce the power consumption for energy saving. With an ACPI-compliant operating system such as Windows 2000 and Windows XP, power supply to different computer components is c[...]

3-8 Managing Power Hibernation Hibernation is a very useful feature. People frequently open many applications when they use computers. It takes some time to get all these applications open and running, and nor mally they all have to be closed before the system can be turned off. When you use the hibernation feature, you do not hav e to close the ap[...]

Managing Power 3-9 Power-Saving Tips In addition to your computer’s auto m atic power management, you can do your part to maximize the battery’s operating time by following these suggestions.  Do not disable Power Management.  Decrease the LCD brightness to the lowest comfortable level.  Disable the serial port if no device is connecte[...]

3-10 Managing Power[...]

CHAPTER 4 Expanding Your Computer You can expand the capabilities of your computer by connecting ot her peripheral devices. When using a device, be sure to read the instructions accompanying the device together with the relevant section in this chapter. This chapter gives guidelines on installing and using these devices:  External monitor  US[...]

4-2 Expanding Your Computer Connecting an External Monitor If you want the benefits of a larger display screen with higher resolution, you can connect an external CRT monitor that supports the DVI interface to your computer. Follow this procedure to conn ect an external monitor: 1. Make sure that the computer is not turned on. 2. Plug the monitor?[...]

Expanding Your Computer 4-3 Connecting a USB Device Your computer has two USB ports that supports transfer rates up to 12 MB/s for USB 1.1 devices and 480 MB/s for USB 2.0 devices, such as digital camera, scanner, printer, modem , and mouse. USB is specified to be an industry standard extension to the PC architecture. It supports “Plug-and-Play?[...]

4-4 Expanding Your Computer Connecting a Serial Device Your computer has a serial port for connecting a serial device such as an external modem. Follow this procedure to connect a serial device: 1. Make sure the “COM1 Settings” item is set properly in the SCU program. (See “Advanced Menu” in Chapter 5 for information.) 2. Plug the device ca[...]

Expanding Your Computer 4-5 Connecting an IR Device Your computer has an IR (infrared) port for connecting an infrared-equipped device wirelessly such as another computer, printer, or PDA (Personal Digital Assistant). Follow this procedure to connect an IR device: 1. Under Windows, make sure that the IrDA Fast Infrared Port is set to HP HSDL-2300/3[...]

4-6 Expanding Your Computer[...]

Expanding Your Computer 4-7 Connecting a Video Capture Device NOTE : To take advantage of the AV input port, the Video Capture driver supplied with your computer must be installed (see chapter 6 for details). Your computer has an AV input port on the rear of the computer for connecting a video capture device such as high-quality CCD, as well as con[...]

4-8 Expanding Your Computer System Memory Upgrade You can upgrade your computer by changing system memory to a maximum of 2 GB on the two 200-pin D DR SO-DIMM slots. However, to avoid damage during the installation procedure, please ask your dealer for help.[...]

CHAPTER 5 Setup Configuration Utility (SCU) SCU is a program for configuring the BIOS (Basic Input/Output System) settings of the computer. BIOS is a layer of software, called firmware, that translates instructions from other layers of software into inst ructions that the computer hardware can understand. The BIOS settings are needed by your comput[...]

5-2 Setup Configuration Utility (SCU) When and How to Use the SCU Program When to Use You need to run the SCU program when:  You see an error message on the screen requesting you to run Setup.  You want to restore the factory default settings.  You want to modify some specific settings according to the hardware.  You want to modify some[...]

Setup Configuration Utility (SCU) 5-3 Moving Around and Making Selections A brief description of keyboard usage is listed next: Key Function ← , → Selects a menu title. ↑ , ↓ 1) Selects an item or option. 2) Brings up/ down the val ue. Enter 1) Brings up the sub-m enu when avail able. 2) Opens or closes the options windo w when an item is s[...]

5-4 Setup Configuration Utility (SCU) Main Menu Date and Time Sets the system time (Hour, Minute, Second) and date (Month, Day, Year).[...]

Setup Configuration Utility (SCU) 5-5 Internal Numlock Sets if you can enter a number when Num Lock is turned off. When this item is enabled, you can press and hold Fn , and then press a letter key to enter a number even if Num Lock is turned off. When this item is disabled, you cannot enter a number with the above method. A check m ark (  ) ind[...]

5-6 Setup Configuration Utility (SCU) Advanced Menu Geyserville Support[...]

Setup Configuration Utility (SCU) 5-7 Enables or disables the Geyserville f eature of the CPU. The Geyserville feature helps conserve battery life by decreasing the CPU’s running speed under certain conditions while still maintaining a high performance. If this item is enabled, the CPU w ill automatically change its speed whenever necessary based[...]

5-8 Setup Configuration Utility (SCU) COM Ports Allows you to configure the COM ports of the computer. COM1 / 2 (FIR) / 3 / 5 / 6 Settings sets the I/O (Input/Output) address and the Interrupt ReQuest line (IRQ) settings of the COM ports. The options are Disabled ; COM1, 3F8, IRQ4 ; COM2, 2F8, IRQ3 ; COM3, 3E8 , IRQ6 ; COM5, 3E0, IRQ5; COM6, 2E0, I[...]

Setup Configuration Utility (SCU) 5-9 Security Menu Power-on Password[...]

5-10 Setup Configuration Utility (SCU) Allows you to set the password for your system. When typing the password, first make sure that Num Lock is off, then type your password in the entry fields and press Enter . Confirm your password by typing it again and pressing Enter . If the Enable Password to Power-on sub-item is enabled, the set password is[...]

Setup Configuration Utility (SCU) 5-11 Boot Menu Boot Sequence Sets the first, second, third, and fourth booting device. The system will try to boot from the first device but if it is not available, will try the next boot device. If you set the first boot device to LAN Boot , the s ystem will boot from the LAN server first. The options are Hard Dis[...]

5-12 Setup Configuration Utility (SCU) Exit Menu Save Changes and Exit Saves the changes you have made and exit the SCU program . Discard Changes and Exit Exits the SCU program without saving the changes you have m ade. Get Default Values Loads factory default values for all the items. Load Previous Values Restores previous values for all the items[...]

CHAPTER 6 Installing Software Drivers To take full advantage of the unique features of your computer, some operating systems require custom software, known as drivers, to be installed. If you purchased the computer with Windows pre-installed, your dealer may have already installed the drivers. If not, you need to install the drivers using the drive[...]

6-2 Installing Software Drivers How to Use the Driver CD NOTES: • The drivers may have been updated after this manual was published. For driver upgrade, please contact your dealer. • You can always find README or document files on the driver CD. These files contain the latest information from the software supplier. Please read the files togethe[...]

Installing Software Drivers 6-3 Drivers on the First Page To install the necessary driver, just click on the particular option and follow the onscreen instructions to c ontinue and complete installation. Device Driver Installs the device drivers (chipset, VGA, LAN, audio, modem, etc.). Video Capture Shows you the instructions on installing the driv[...]

6-4 Installing Software Drivers Upon clicking “Next Page,” the following screen appears: Drivers on the Second Page IrDA Connects an IrDA-compliant device for wireless data transfer PROSet Installs the WLAN Utility that allows your sy stem to connect wirelessly to the Internet. SpeedStep Allows you to use the SpeedStep function of the computer [...]

Installing Software Drivers 6-5 Drivers on the Three Page TouchScreen Click on the TouchScreen button to install touch screen driver. GPS Click on the GPS button to on installing the GPS DRIVER..[...]

6-6 Installing Software Drivers Install Touch Screen Driver for Windows 2000, Windows XP 1. After the system has finished rebooting, click on the “PenMount Monitor icon located on the taskbar to bring up the “PenMount Control Panel.” 2. Select the “ Standard Calibration” folder and click on “OK” button. When the “PENMOUNT Control Pa[...]

Installing Software Drivers 6-7 NOTE 1. If you play gam e with CRT or DVI monitor, please select “T win” to display the screen.[...]

6-8 Installing Software Drivers 2. When you use Windows Media Player to play a video fi le, the screen many flashes ina very short tim e. This behavior can occur if there are problem with video. To resolve the i ssue, you could set the configurati on in Windows Medi a Player, use t he following steps: Step 1. In Windows Media Player, SLECT[Tool s] [...]

Installing Software Drivers 6-9 3. CANCEL [Use overlays]->Click [OK]. Step 4. Close the Windows Media Player, and then restart the Windows Media Player. 1. Panel Calibration Standard Calibration The Standard Calibration function lets you match the touch screen to your display so that the point you touch is accurately tracked on screen. Standard [...]

6-10 Installing Software Drivers greater the accuracy. Errors in calibration may occur due to viewing angle, or individual skill, and there may be little di fference in using 16 or 25 points. Note that a stylus is recommended for the most accurate results. If there is distortion problem in your touch panel, please use the Advance Calibration functi[...]

Installing Software Drivers 6-11 Fig1 Fig2[...]

6-12 Installing Software Drivers 3. If the Graphics Controller setting “Extended Desktop” and Primary Device is Monitor , the Touch Screen setting you need to select “Multiple Monitor Support” Æ Map Touch Screens. (See Fig1) Fig1 PS. If your O.S. shutdown and docking un-dock and then enter system, please re- Calibration your panel. 1. Pane[...]

Installing Software Drivers 6-13 Advanced Calibration The Advanced Calibration function improves the accuracy of calibration by using more involved engineering calculations. Use this function only if you have tried the Standard Calib ration and there is still a discrepancy in the way the touch screen maps to the display. You can choose 4, 9, 16 or [...]

6-14 Installing Software Drivers 2. Please cancel the function “Automatic Rotation Detection”. (See Fig1) Because use the function key “Fn + F9 “(CRT/LCD/Simulscan toggle) system standard will appear a calibration screen. (See Fig2)[...]

Installing Software Drivers 6-15 Fig1[...]

6-16 Installing Software Drivers Fig2 3. If the Graphics Controller setting “Extended Desktop” and Primary Device is Monitor , the Touch Screen setting you need to select “Multiple Monitor Support” Æ Map Touch Screens. (See Fig1)[...]

Installing Software Drivers 6-17 Fig1 PS. If your O.S. shutdown and docking un-dock and then enter system, please re- Calibration your panel.[...]

6-18 Installing Software Drivers[...]

CHAPTER 7 Caring for the Computer Taking good care of your computer will ensure a trouble-free operation and reduce the risk of damage to your computer. This chapter gives you guidelines covering these areas of maintenance:  How to protect the computer  What to note when using and storing the computer  How to clean the computer  What to[...]

7-2 Caring for the Computer Protecting the Computer To safeguard the integrity of your computer data as well as the computer itself, you can protect the computer in several ways as described in this section. Using the Password The power-on password protects your computer against unauthorized use. If the password is set, the prompt requesting for th[...]

Caring for the Computer 7-3 Taking Care of the Computer Location Guidelines  Use the computer where the temperature is between 0 ° C (32 ° F) and 50 ° C (122 ° F).  Avoid placing the computer in a location subject to high humidity, extreme temperatures, mechanical vibration, direct sunlight, or heavy dust.  Do not cover or block any ve[...]

7-4 Caring for the Computer Cleaning Guidelines  Never clean the computer with its power on.  Use a soft cloth moistened with water or a non-alkaline detergent to wipe the exterior of the computer.  Gently wipe the display with a soft, lint-free cloth. Do not use alcohol or detergent on the display.  Dust on the IR/Bluetooth port can in[...]

Caring for the Computer 7-5 When Traveling  Before traveling with your computer, make a backup of your hard disk data into optical discs or other storage devices. As an added precaution, bring along an extra copy of your im portant data.  Make sure the battery p ack is fully charged.  Make sure the computer is turned off.  Do not leave [...]

7-6 Caring for the Computer[...]

CHAPTER 8 Troubleshooting Hardware, software, or a combination of both can cause computer problems. When you encounter any problem, it might be a typical problem that can easily be solved. This chapter tells you what acti ons to take when solving common computer problems. It is divided into three sections:  Preliminary checklist  Solving comm[...]

8-2 Troubleshooting Preliminary Checklist Here are helpful hints to follow befo re you take further actions when you encounter any problem:  Try to isolate which part of the computer is causing the problem .  Make sure that you turn on all peripheral devices before turning on the computer.  If an external device has a probl em, make sure t[...]

Troubleshooting 8-3 Solving Common Problems For easy reference, the problems are divided into these categories. Prob l em Ty pe Go to Battery Problems P. 8-4 Bluetoot h Problem s P. 8-4 DVD Drive Problem s P. 8-4 Display Problems P. 8-5 Fingerprint Recognitio n Problems P. 8-7 Hardware Device Problem s P. 8-7 Hard Disk Drive Pr oblems P. 8-8 8-7 In[...]

8-4 Troubleshooting Battery Problems The battery does not charge (Battery Charge indicator does not light amber).  Make sure that the AC adapter is properly connected.  Make sure that the battery is not too hot or cold. Allow time for the battery pack to return to room temperature.  Make sure that the battery pack is installed correctly. ?[...]

Troubleshooting 8-5 I cannot end a Bluetooth connection.  If another device is connected to your computer, you can either end the connection using the other devi ce or by deactivating Bluetooth. DVD Drive Problems The DVD drive cannot read a disc.  Make sure that the disc is correctly seated in the tray, with the label facing up.  Make sur[...]

8-6 Troubleshooting Display Problems Nothing appears on the screen.  If the power-on indicator is not on, check the electrical outlet, the plugs and power cords.  If the power button does not respond to a light touch, press the button firmly.  If you are using battery power, make sure that it has a charge remaining and that it is installed[...]

Troubleshooting 8-7  Make sure that the monitor’s si gnal cable is properly connected.  Switch the display to the monitor by pressing Fn + F9 , or change the display through the settings in Display Properties. Simultaneous display/multi-display does not work.  Make sure that you turn on the external monitor before turning on the computer[...]

8-8 Troubleshooting Hard Disk Drive Problems The hard disk drive error message appears on the screen.  Insert a bootable diskette and check the integrity of your hard drive.  The hard disk drive has defects. Ask your dealer for help. The hard disk drive operations seem slow.  The data files stored on the hard di sk drive may be fragmented.[...]

Troubleshooting 8-9  Make sure that the IR ports are clean. Keyboard, Mouse and Touchpad Problems The keyboard does not respond.  Try connecting an external keyboard. If it works, contact an authorized dealer, as the internal keyboard cable might be loose. The numeric keypad is disabled.  Make sure that the Num Lk is switched on. (Check if[...]

8-10 Troubleshooting WLAN Problems I cannot use the WLAN feature.  Make sure that the Mini PCI WLAN card is correctly installed.  Make sure that the necessary driver(s) is correctly installed.  Make sure that the WLAN feature is turned on. Transmission quality is poor.  Your computer may be in an out-of-range situation. Move your comput[...]

Troubleshooting 8-11  If the operating radio channel is in poor quality, change the Access Point and all the wireless station(s) within the BSSID to another radio channel.  Your computer may be in an out-of-range situation. Move your computer closer to the Access Point it is associated with.  Make sure that y our computer is configured wit[...]

8-12 Troubleshooting Power Management Problems The computer does not enter Standby or Hibernation mode automatically.  If you have a connection to another computer, the computer does not enter Standby or Hibernation mode if the connection is actively in use.  Make sure that the Standby or Hibernation time-out is enabled. The computer does not[...]

Troubleshooting 8-13 Sound Problems No sound is produced.  Make sure that the volume control is not set too low.  Make sure that the audio driver is correctly installed.  Make sure that the computer is not in Standby mode.  If using an external speaker, make sure that the speaker is properly connected. Distorted sound is produced.  M[...]

8-14 Troubleshooting  If you are using the battery power, make sure that the battery is not discharged. When you turn on the computer, it stops after POST.  Restart your computer. Other Problems The date/time is incorrect.  Correct the date and time via the operating system or SCU program.  After you have performed everything as describ[...]

Troubleshooting 8-15 Resetting the Computer You may have to reset (reboot) your computer on some occasions when an error occurs and the program you are using hangs up. If the system operation seems to hang up, first wait. It is possible that the system is processing data. Periodically check the hard disk drive in-use indicator, if it flashes irregu[...]

8-16 Troubleshooting[...]

APPENDIX A Specifications NOTE: Specifications are subject to change without any prior notices. Parts Specifications CPU Intel Mobile Pentium Doth an Processor-M series, µ -FC PGA package, 1.8 GHz; Front Side Bus (FSB) 400 MHz, 21 W thermal ceiling Cache Memory L2 2 MB on-die ROM BIOS 512 KB Flash EEPROM, system and VGA BIOS, ACPI 2.0, PC2001-comp[...]

A-2 Specifications Parts Specifications Modem 56 K (V.90/V.92; 28,000 ~ 56,0 00 bi ts/s data rates) LAN 10/100 Base-T Ethernet Communications Others (options) Wireless LAN 802.11a/b/g using diversity antennas GPS Lassen IQ module Bluetooth Class 1 Wireless modem in X-Bay module AC adapter Input: 100 ∼ 240 V AC, 50 ∼ 60 Hz universal adapter Outp[...]

APPENDIX B Fingerprint Recognition System Your system features a fingerprint recognition system designed for computer security. It provides a high level of user convenience and gives you a set of powerful tools for securing your computer and protecting your private data. The system can: • display fingerprint images derived from the sensor IC • [...]

B-2 Fingerprint Recognition System Finger Placement When placing a finger to be enrolled or identified, slide the cover to expose the sensor matrix surface, then use a light, but firm and steady pressure. Avoid moving your finger during the scan, and be sure that you are making contact with the “sensor matrix” and with the surrounding d rive ri[...]

Fingerprint Recognition System B-3 Using the Fingerprint Recognition System Utility NOTE: To take advantage of the fingerprint re cognition system, the driver and utility supplied with your computer must be installed (see chapter 6 for details). Double-click on the icon located on your Windows’ system tray. The main menu appears. The following pr[...]