Cisco Systems 3000 manual

Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco T elePresence Sy s t e m 30 0 0 Assembl y Guide Use & Care Guide Field-Repl aceable Unit Guide October 31, 20 08 Text Pa rt Numbe r: OL -14521-0 1[...]

THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY P[...]

iii Cisco TelePr esence Syste m 3000 OL-14521-01 CONTENTS Preface ix Intro ducti on i-ix Conv enti ons i-ix Obtain ing Docu mentat ion, Obt aining Su pport , and Secur ity Gui deline s i-x Relat ed D ocum ent atio n i-x i-x Overview 1-1 Chapter Organi zation 1-1 Assembly Over view 1-3 Conv enti ons an d Term ino logy 1-4 Tools an d Equip ment List [...]

Cont ents iv Cisco Tele Presence Syste m 3000 OL-14521-01 Buildi ng the Table Assemb ly, Pr oduct ID CT S3K-FUR -MAPLE 6-5 Buildi ng the Table Assemb ly, Pr oduct ID CT S3K-M 6-18 Assemblin g the Remaining Ci sco TelePres ence Elements 7-1 Parts Li st 7-1 Routing Power and Signal Cables 8-1 Parts Li st 8-1 First- Tim e Se tup 9-1 Parts Li st 9-1 Lo[...]

Content s v Cisco TelePr esence Syste m 3000 OL-14521-01 Removing the Left Ta blet op Door Secti on 11-5 Remo vin g a Disp lay Shelf 11-5 Removing the Displ ay Scree n and Complet ing the Pr ocedu re 11-6 Replac ing a Spe aker—Par t Number C TS-LDSPKR 11-8 Requir ed Infor mation , Tools, and Equipme nt 11-8 Powe ring Off t he S yst em 11-8 Removi[...]

Cont ents vi Cisco Tele Presence Syste m 3000 OL-14521-01 Carton 4 of 47: Sec ondary Cod ec, 80 0-2820 2-xx, CTS -CODEC- SEC A-3 Carton 5 of 47: Sec ondary Cod ec, 80 0-2820 2-xx, CTS -CODEC- SEC A-4 Carton 6 o f 47 : Proj ector , 74- 4824- xx, CTS- PRJTR- GEN1 A- 4 Carto n 7 of 4 7: S pea ker , 74- 4740 -xx, CTS -LDS PKR A-4 Carto n 8 of 4 7: S pe[...]

Content s vii Cisco TelePr esence Syste m 3000 OL-14521-01 Carto n 44 of 47: Table top, 69- 163 8-x x, CTS 3K- FUR- MAPL E A-12 Carto n 45 of 47: Table top, 69- 163 9-x x, CTS 3K- FUR- MAPL E A-13 Carton 46 of 47: Display She lf, 69- 1640-x x, CTS3K- FUR-MAPLE A-13 Carto n 47 of 47: Spe aker Bo ard s, 69- 164 1-xx , CTS3 K-FU R- MAPL E A-13 Carton [...]

Cont ents viii Cisco Tele Presence Syste m 3000 OL-14521-01 Carton 36 of 44: Projecto r Scree n, 74-541 6-xx, CTS3K-SCRE EN A-23 Carto n 37 of 44 : Acc essor y Cab ine t, Righ t, 69- 183 7-x x, CTS3 K-M -TA BLE- G2 A-23 Carton 38 of 44: Acces sory Ca binet , Lef t, 69- 1838- xx, CTS 3K-M-TA BLE-G2 A-23 Carton 39 of 4 4: Disp lay Shelf Suppor ts and[...]

ix Cisco TelePr esence Syste m 3000 OL-14521-01 Preface Revised: October 31, 2008, OL- 14521-01 Introduction The Cisco T ele Pr esence 300 0 Assembly Guide outline s the steps and best p ract ices fo r as sembling and installing the Cisco T elePresen ce 3000. This guide is intende d primarily for install ers of the Cisco T elePresence Syste m 3200.[...]

x Cisco Tele Presence Syste m 3000 OL-14521-01 Preface Obtaining D ocumentat ion, Obtai ning Suppor t, and Secur ity Gui delines Ti p Means the inf ormation cont ains useful tips. Obtaining Do cumentation, Obtaining Support, and Security Guidelines For informat ion on obtai ning docu menta tion, sub mittin g a service re quest, an d gathering addit[...]

CH A P T E R 1-1 Cisco TelePre sence System 3000 OL-14521-01 1 Overview Revised: October 31, 2008, OL- 14521-01 Chapter Organization Chapter 1, “Overview” (this chapter) Provides c hapter organization and co ntent of th is do cument and i ncludes a n overview of the assemb ly steps y ou pe rform. Chapter 2, “B uilding the Disp lay Assembly”[...]

1-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Chapter Organiza tion • Each element is desc ribed using one or mo re ill ustrat ions. The el ements are: – Camera assembly - attach es t o the ce nter Di spla y struc tur e – Microphone assembly - at tach to the thre e table s egme nts – T able Leg Wiring assembly - wi [...]

1-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 Overview Assembly Overvi ew Figu re 1 -1 View of an As semb le d Cisc o T elePresen ce System 3 20 0 Assembly Overview Perform the follo wing steps to install a CTS 3000: Step 1 Build the display assembly . See Chap te r 2, “ Buil din g t he Dis pla y Assem bly” for more i nformat ion. S[...]

1-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Convention s and Te rminology c. Inst all the I/O Mod ules for th e table le g power an d Ethern et conn ections and connec t the Eth ernet cable s. Se e Step 3 and Step 4 in Ch apte r 7, “ As se mbli ng th e R ema ini ng Cis co T eleP res enc e Elements ” to install the I/O[...]

1-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 Overview Tools and Eq uipment List Figur e 1 -2 Cable Connection Labeling S ystem Tools and Equ ipment List T o assemb le the Cisc o T elePrese nce 3000, you need the following tools an d equipme nt: Uncr ating an d Unpa ckin g: • Claw hammer or smal l pry bar • Larg e Phillips scre wd r[...]

1-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 Ov erv iew Tools and Equ ipm ent List[...]

CH A P T E R 2-1 Cisco TelePre sence System 3000 OL-14521-01 2 Building the Display Assembly Revised: October 31, 2008, OL- 14521-01 Parts List Key Part Description Part Number Qty Ctn Notes 1 Display st ructure 700-233 58-xx 3 35, 36, 37 (CTS3K -FUR - MAPLE) 32, 33, 34 (CTS3K -M) 2 Rear fo ot stabilize r 700-233 60-xx 6 17 3 Front foo t stabilizer[...]

2-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Cautio n The disp lay stru ctures are unstabl e durin g assemb ly . Use c aution, a nd suppor t all struc tures as re quired . War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note T[...]

2-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 2 Attach th e Codec Safety tra ys to the Front F oot stab ilizers . Note If you ordere d a Presen tation Cod ec, atta ch the lar ger tra y that comes with the Pres entation Codec packag e, p art no . 700 -25301- xx, i n the ce nter d isplay . [...]

2-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 3 Attach the Rear and Front Foot stabi lizers to the Display structur es. Figur e 2-3 Rear and F ront F oot stabiliz ers 201101 3 12 11 2 1[...]

2-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 4 Attach the left and right Display Shel f supports t o each Displa y structure. Figur e 2-4 Lef t and Righ t Displa y Shelf suppor ts 201103 5 12 11 6 1[...]

2-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 5 Attach the D isplay T ilt br acket s to e ach Dis play st ructur e. Figur e 2-5 Displa y Tilt b rac k ets Note Do not tighten the Disp lay T ilt brack ets. Y o u will need to a djust them to le vel the Pla sma displ ays in Chapter 3, “ Moun[...]

2-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 6 Attach th e Camera Assem bly brack et to the center Display str ucture. Figu re 2-6 Cam era Ass emb ly bracket Note Th e Came ra Asse mbly bra cket atta ches to the ce nte r Disp lay stru ctur e. 201105 1 9 13 13[...]

2-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 7 Attach t he upp er and lower Suppor t crossba rs to t he left an d right Display structur es. Figur e 2-7 Upper and Low er Support cr ossbars Ti p Use the screw holes near est the ends of the Support cro ssbars. 201107 10 12 10 1 11[...]

2-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 2 Buildin g the Dis play Assem bly Parts List Step 8 Attach t he upp er and lower Suppor t crossba rs to the cent er Displ ay struc ture. Figur e 2-8 Upper and Low er Support cr ossbars 201108 10 12 10 1 10 10 11[...]

2-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 2 Building the Display Assembly Parts Li st Step 9 Position the three Disp lay structu res relati ve to the rear w all. Figur e 2-9 P ositio ning the Displa y Str uctu r es 204152 18 - 22” (45.7 cm - 55.8 cm) 32 - 36” (81 cm - 91 cm) 32 - 36” (81 cm - 91 cm)[...]

CH A P T E R 3-1 Cisco TelePre sence System 3000 OL-14521-01 3 Mounting and Leveling the Plasma Displays Revised: October 31, 2008, OL- 14521-01 Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note Th e direc tions left and right re fer to the asse mbly a s you face t he[...]

3-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Parts Li st Step 1 Hang the lef t, cent er , and ri ght Pl asma dis pla ys on t he Dis play struc ture cross bars Caution M ake sure the Plas ma disp lay Leveling feet rema in firmly sea ted on t op of t he Disp lay shelf supports. Figur e 3-1 T[...]

3-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Parts List Step 2 Attach the Display shelves to t he Display shelf supports Figur e 3-2 At tac h the D ispla y she lv es t o the Dis pla y shelf s uppor ts Note The Display shelves are use d in this chapter for le ve ling purpose s only . The Displ[...]

3-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Purpose of Le veling t he Plasm a displays Purpose of Levelin g the Plasma displays The three Pl asma disp lays act a s windo ws all owi ng a thre e-way v iew into the r emote Cisco T elePresence conf erence ro om. The Disp lay shelf in fr ont o[...]

3-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Levelin g Goals Lev e ling the Display shelves and the Plasma d isplays, and aligning the seams of th e Display she lves with the edges of the Plasma displays insures that images displayed from the remote c[...]

3-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Purpose of Le veling t he Plasm a displays Step 5 The surface of the Display shelves should not obstruct any l ines of resolution. Use the Plasma display Le v eling f eet to raise o r lo wer the Plasma d isplays and ma ke s ure all line s of re [...]

3-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Step 6 Use the Plasma displa y Le veling feet t o le ve l the Pla sma display s along th e X ax is. Use the Display tilt bra ckets to le ve l the Plasma displays along the Y axis. Ti p Y ou should lev el th[...]

3-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Purpose of Le veling t he Plasm a displays Step 7 Align the ed ges of Pla sma d isplays The gap be tween Plas ma displa ys should be uniformly even from the t op edg e of the Plasm a display to the bo ttom ed ge. Y ou sh ould t ry to m ake the g[...]

3-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 3 Mounting and L eveling the Plasma Display s Purpose of Leveling th e Plasm a displays Step 8 Align th e seams of the Disp lay shelve s with the seam s between Plas ma displays. Y ou may need to adjust the Plasma displa ys left to right so the seam create d between the edges of two Plasma dis[...]

3-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 3 Mounting an d Levelin g the Pla sma Display s Completing the Plasma di splay s etup Completing the Plasma display setup Step 9 Apply t he Black Buffer strips Figu re 3-9 Ap ply t he Bl ack Bu ff er strips 201119[...]

CH A P T E R 4-1 Cisco TelePre sence System 3000 OL-14521-01 4 Building the Lightin g Assembly Revised: October 31, 2008, OL- 14521-01 Parts List Key Part Description Part Number Qty Ctn Notes 1 Lighti ng su pport b rackets 700-2 3749-xx 6 26 (C TS3K-F UR-MA PLE) 23 (C TS3K-M) 2 Support strut s 700-23752 -xx 6 26 (C TS3K-FU R-MAP LE) 23 (C TS3K-M) [...]

4-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st 14 Refl ector bottom : top side 700-2 3827-x x 2 26 (CTS3K-F UR-MA PLE) 23 (C TS3K-M) 15 Refl ector bottom : end 700-2 3828-x x 2 26 (CTS3K- FUR-M APLE ) 23 (C TS3K-M) 16 Refl ector bottom spac er 700-2 4152-x x 2 26 (CTS3K-F UR-MA PLE) 23 (C TS3K-[...]

4-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cautio n Metal and plastic edge s can be sharp. Cisc o recomme nds you we ar safe ty gloves and safety gla sses when attaching t he[...]

4-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 1 Assemble the six Suppor t stru ts and six Lighti ng Sup port br ackets. Figur e 4-1 Suppor t str uts and Lighting Su ppor t bra ck ets 2 27 1 31 201125[...]

4-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 2 Attach the left and ri ght outer Supp ort brac kets (from Figure 4-1 ) to the horizontal ba r on the left and right Display structures. Figur e 4-2 Left and Right out er Support br ack ets (from Figur e 4-1 ) Note There is no p hysical d if[...]

4-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 3 Attach the four inne r Support bra ckets to the Supp ort crossb ars. Figur e 4-3 Fou r inner Suppo rt br ack ets (from Figu r e 4 -1 ) Note There is no p hysical d ifference betw een the six Support bracket s assemble d in Figu re 4-1 . Any [...]

4-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 4 Attach th e four En d struc ture bra ckets to the ends of the Suppo rt cross bars. Figur e 4-4 Fou r End str uctur e brac kets 201128 3 31 31[...]

4-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 5 Attach th e three Refl ector botto m trays to th e Support br acket s. Figu re 4-5 Three R efl ector b ottom trays 201129 27 32 13 27 14[...]

4-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 6 Attach the t wo Reflector bottom spacers to join the three Refl ector bottom tray s. Figu re 4-6 T w o Re flecto r bottom spac er s 201 130 13 14 16 27[...]

4-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 7 Attach the l eft and righ t (v ertical) Reflec tor Bottom e nds t o the End Str ucture brack ets and att ach the complian ce sticke r to the left reflector bottom end. Figur e 4-7 Lef t and Righ t (v ert ical) Refle ct or Bot tom ends 27 15[...]

4-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 8 Attach the Light Cup brac ket to the l eft and rig ht (v ertical) Reflecto r Bottom e nds. Figur e 4-8 Light Cup br ack et 23 27 15 201 132[...]

4-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 9 Attach the three 5-foot Light f ixtures inside th e Reflector bottoms. Figur e 4-9 Thr ee 5-f oot Light fixtur es 24 24 27 13 24 32[...]

4-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 10 Attach the l e ft and righ t 4-foot Side Lig ht f ixtures to t he left and ri ght (v ertical) Refle ctor Bottom en ds. The power cords fo r the Side Light fixtures shou ld extend from the top of the fixture s ( Figure 4-8 ). Figur e 4-1 0[...]

4-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 11 Attach th e two center Met al T rim panels. Figur e 4-1 1 T wo cent er Metal T ri m panel s 12 9 201 135 31[...]

4-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 12 Attach the tw o side Meta l T rim panels. Figur e 4-12 T wo side Metal T r im panels 34 10 31 201 136[...]

4-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 13 Attach the cen ter Pl astic Di ff user panel. Figur e 4-13 Cente r Plastic Diff user panel 201 137 4 31[...]

4-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 14 Attach the lef t and rig ht Plastic Dif fuser panels. Note The rounded c orner s of the left an d right Plast ic Diffuser pan els point outward. Figur e 4-14 Lef t and Righ t Plastic Diff user panels 201 138 7 6 31[...]

4-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 15 Attach the fo ur L- brack ets to the tw o (ver tical) e nd Plastic Dif fuser panels . Figu re 4-15 Four L - brackets 201139 5 31 8[...]

4-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 16 Attach the t wo (v ertical) Plastic D if fuser panels to the End Stru cture b rack ets. Figur e 4-16 T wo (v er tical) Pla stic Dif fuser pane ls 5 31 201 140 3[...]

4-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 17 Slide the Plast ic Dif fuser Panel br ace be tween the en d (ve rtical ) Plastic Dif fuser panel and the left and right Plastic Dif fuser panels. Note If th e diff user become s scratched, use a black felt- tip permanen t marker to cov er [...]

4-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 18 Attach the cent er Reflecto r top to the c enter Refle ctor bott om. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-18 C enter Refl ector to p 17 1 3 27 201 141[...]

4-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 19 Attach the lef t and rig ht Refle ctor tops to the le ft and r ight Ref lector botto ms. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-19 Le ft an d Rig ht Re fl ector tops 18 18 14 32 201 142 27[...]

4-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 20 Join the left, c enter , and rig ht Reflecto r tops with the l eft and right Ref lector T ransition p ieces. Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-20 Le ft and R ight Ref lec tor T r ansi tio n pi ece s [...]

4-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 21 Attach the l eft and righ t (v ertical) Reflec tor en ds to the le ft and right (ve rtical ) Ref lector Bottom ends . Note Do not tig hten scre ws until co mpleting Figu re 4-2 2 . Figu re 4-21 Le ft and R ight (vertica l) Refl ector e nds[...]

4-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 4 Building th e Lighti ng Assemb ly Parts List Step 22 Attach the l eft and r ight c orner Reflecto r T ransition p ieces t o the Reflecto r tops . Note T ighten al l s cre ws from Figure 4-18 t hrough Figure 4-22 . The goal is to insure the reflecto r pieces for m a “seamle ss hood” arou[...]

4-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 4 Building the Lighting Assembly Parts Li st Step 23 Attach th e two Me tal T rim panels to the L-brack ets attached to the t wo (v ertical) Plastic Dif fuser panels. Note The se Metal T rim panels cove r the access opening us ed to route cables. Y ou may not w ant to attach these Met al T r[...]

CH A P T E R 5-1 Cisco TelePre sence System 3000 OL-14521-01 5 Building the Display Shelf Assembly Revised: October 31, 2008, OL- 14521-01 Parts List Key Part Descr iption Part Numb er Qty Ctn Notes Display Shelf, Product ID CTS3K-FUR-MAPLE 1 Display shelf section: left 700-236 00-xx (CTS3K- FUR- MAPLE) 700-233 41-xx (CTS3K -M) 1 46 2 Display shel [...]

5-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Part s List 12 M4 x 12 mm pan he ad screws 6 9-1878 -xx 48-2426 -xx 1 13 M8 x 30 mm screw 48-2313 -xx 15 1 14 Cam lo ck c ouplin g 51-4580 -xx 20 1 Accessory Cab inet 1 Acce ssor y cabi net, ri ght 700- 23601- xx 1 42, 43 2 Acce ssory cabi net, left 700-2[...]

5-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Determining the Display Shelf Type Cautio n The she lf segment s are unstab le during asse mbly . Use cauti on, and suppor t all stru ctures a s require d. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or serv[...]

5-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Determining t he Displ ay Shelf Type – Displ ay shel ves wi th a pr oduct ID of CTS 3K -FUR-M APLE use ca m loc ks, ca m lock rods, and plates to atta ch t he sec tions. – Display shelv es with a product ID of CTS3K-M use dra w b olts to attach the se[...]

5-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Bui lding t he Displa y Shelf Assembly , Produc t ID CTS3 K-FUR- MAPLE Building the Displa y Shelf Assembl y, Product ID CTS3K-FUR- MAPLE Step 1 Attach the Display shelf hardw are to the display sh elves . Figur e 5-2 Displa y Shelf Hard w ar e Note T [...]

5-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Prod uct ID CTS3K-FUR-MA PLE Step 2 Attach the l eft Di splay s helf. Figur e 5-3 Lef t Display s helf 201148 1 13 13[...]

5-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Bui lding t he Displa y Shelf Assembly , Produc t ID CTS3 K-FUR- MAPLE Step 3 Attach the center Dis play sh elf Figur e 5-4 Cent er Displ a y shelf Note Refer to Figure 5-2 to see the h ardw are us ed to atta ch the cent er Display shel f to the left D[...]

5-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Building the Display Shelf Assembly, Prod uct ID CTS3K-FUR-MA PLE Step 4 Attach the r ight Di splay shelf. Figur e 5-5 Right Displa y shelf Note Refer to Figure 5-2 to see the hardwar e used to attach the righ t Display shelf to the cente r Display shelf.[...]

5-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Bui lding t he Displa y Shelf Assembly , Produc t ID CTS3 K-FUR- MAPLE Step 5 Attach the screen sup ports to th e access ory cab inets an d position, but do not attach, the cabi nets to the left and righ t attach ment bra ckets These sc reen su pports [...]

5-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Buil ding the Display Shelf Assembly , Product ID CTS3K-M Building the Displa y Shelf Assembl y, Product ID CTS3K-M Step 1 Attach the Display shelf hardw are to the display sh elves . Figur e 5-7 Displa y Shelf Hard w ar e Note T he Right Acce ssory Cabi[...]

5-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Display Shelf Assembly, Product ID CTS3K-M Step 2 Attach the l eft Di splay s helf. Figur e 5-8 Lef t Display s helf 201148 1 13 13[...]

5-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Buil ding the Display Shelf Assembly , Product ID CTS3K-M Step 3 Attach the center Dis play sh elf Figur e 5-9 Cent er Disp la y shelf Note Refer to Figure 5-2 to see the h ardw are us ed to atta ch the cent er Display shel f to the left Disp lay shelf. [...]

5-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 5 Buildin g the Dis play She lf Asse mbly Building the Display Shelf Assembly, Product ID CTS3K-M Step 4 Attach the r ight Di splay shelf. Figur e 5-1 0 Right Dis pla y shelf Note Refer to Figure 5-2 to see the hardw are used to attac h the right Display shelf t o the center Display shelf. 20[...]

5-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 5 Building the Display Shelf Assembly Buil ding the Display Shelf Assembly , Product ID CTS3K-M Step 5 Attach the screen supp orts to th e access ory cab inets an d position, but do not attach, the cabine ts to the left and righ t attach ment bra ckets These sc reen su pports a re only requi[...]

CH A P T E R 6-1 Cisco TelePre sence System 3000 OL-14521-01 6 Building the Table Assembly Revised: October 31, 2008, OL- 14521-01 Parts List Key Part Description Part Number Qty Ctn Notes T able Assembly, Product ID CTS3K-FUR- MAPLE 1 T ablet op leg base 800-28454- xx 800-28628- xx (left) 3 1 41 2 Metal pa ckag ing brac e 700-24275- xx 4 25 3 Mold[...]

6-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Parts Li st Accessory Cab inet 1 Left acce ssory ca binet 700-236 01-xx 1 42, 43 2 M8 x 20 mm s crews 4 8-2273 -xx 14 1 3 Not use d 4 Right acc essory cabin et 7 00-23601- xx 1 42 , 43 Miscell aneou s Table Ite ms Cabine t hole c overs 700-267 53-xx 14 1 U se the[...]

6-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Parts List Cautio n The t able segment s are unstab le during asse mbl y . Use cauti on, and suppor t all stru ctures a s require d. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Cautio n T ab[...]

6-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Determining t he Table Sect ion Type Cautio n In order to pre vent scratchi ng the tabl e tops, you should av oid putt ing any tools on the tabl e surfaces. Note Th e direc tions left and right re fer to the a ssembl y as you face it fr om the fro nt. War ni n g [...]

6-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-FUR-MAPLE Building the Tab le Assembly, Product ID CTS3K-FUR-MAPLE Step 1 Remo ve the Meta l packaging b races f rom the Molded f oam b umpers. Figur e 1 Metal p ack aging brace s and their Molde d f oam bump ers 20[...]

6-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 2 Asse mble the fou r Molded foam bu mpers and the four T able leg bases. Note The leg base with only one top right a ttachment br acket is the left- wing le g (see Figure 10 ). The other three le gs[...]

6-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-FUR-MAPLE Step 3 Attach the Right -wing tablet op sec tion to the r ight Accessory Cabine t bracket . Figur e 3 Right-win g tablet op secti on 201154 15 4[...]

6-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 4 Attach the r ight T able se gment. a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece. M ake sure you scr ew the two halv es of t he Cam Lock rod equa lly into t h e cente[...]

6-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-FUR-MAPLE Step 5 Attach the r ight-m ost T able L eg. Figur e 5 Right-most T able Leg 15 1 3 201156[...]

6-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 6 Attach the c enter T able se gment . a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece. M ake sure you scr ew the two halv es of t he Cam Lock rod equa lly into t h e ce[...]

6-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-FUR-MAPLE Step 7 Attach the Right- center T able leg. Figur e 7 Right-cent er T able leg 15 1 3 201158[...]

6-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 8 Attach the l eft T able se gment. a. Cam Lock rods have two adjustable halves that scr ew into a center pi ece. M ake sure you scr ew the two halv es of t he Cam Lock rod equa lly into t h e cente[...]

6-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-FUR-MAPLE Step 9 Attach the l eft c enter T able l eg . Figur e 9 Lef t center T able leg 15 1 3 201160[...]

6-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 10 Att ac h the left -m os t T ab le leg . Note The left-most T able leg is dif ferent from the other three table le gs. It has only one flange on the right side of the le g, to attach to the left T[...]

6-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-FUR-MAPLE Step 11 Attach the tab le door . Figur e 1 1 T able Door 201162 11 16[...]

6-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- FUR-MAPL E Step 12 Using scissors, complete ly remov e one of the four webbed belts fro m the table hinge safety stra p using Figure 12 as a reference; th en, install the safe ty strap and the “please close” la[...]

6-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-FUR-MAPLE Step 13 Attach the Acces sory cabin ets to the left and rig ht attachmen t brac kets and cov er the visib le scre w holes in the cabinet body with th e cabinet hole cov er . Figur e 13 A ccessory ca binet[...]

6-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Building the Tab le Assembly, Product ID CTS3K-M Step 1 Remo ve the Meta l packaging b races f rom the Molded f oam b umpers. Figur e 14 Metal p ack aging brace s and their Molde d f oam bump ers 201152 3 2[...]

6-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-M Step 2 Asse mble the fou r Molded foam bu mpers and the four T able leg bases. Note The leg base with only o ne top rig ht attachme nt bracke t is the lef t most table le g (see Figure 25 ). The other three le gs[...]

6-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Step 3 Assemble the I/O modules for the outside left and outside right molded foam bu mpers. The outsi de left an d outside right molde d foam bumpers only have one I/O mod ule eac h. The inner molde d foam b ump[...]

6-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-M Step 4 Assemble the I/O modules for the inner molded foam bumpe rs. Note St eps f or rou tin g th e Ethe rnet an d power ca bles are in Cha pter 8, “Routing Po wer and Sig nal Cable s. ” Note Th e flange on t[...]

6-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Step 5 Attach the ri ght wing ta bletop sec tion to th e right Acc essory Cabin et bracket. Figur e 18 Right Wing T ablet op Section 12 205539 15 4 10[...]

6-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-M Step 6 Attach the r ight T able se gment. a. Make sur e you tighte n the draw b olt evenly on b oth sides . b. While a draw bolt is bein g tightene d, ho ld the t able edg es toge ther to avoid dama ge to the dra[...]

6-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Step 7 Attach the r ight m ost T able Le g. Figur e 20 Right Mos t T able Leg 15 15 204140[...]

6-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-M Step 8 Attach the c enter T able se gment . a. Make sur e you tighte n the draw b olt evenly on b oth sides . b. While a draw bolt is bein g tightene d, ho ld the t able edg es toge ther to avoid dama ge to the d[...]

6-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Step 9 Attach the r ight c enter T able l eg . Figur e 22 r ight cente r T able leg 15 15 204141[...]

6-27 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-M Step 10 Attach th e lef t T able s eg ment. a. The dra w bolt s ha ve tw o halv es that scr e w into a center p iece. b. While a draw bolt is bein g tightene d, ho ld the t able edg es toge ther to avoid dama ge [...]

6-28 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Step 11 Attach th e lef t cent er T able le g. Figur e 24 Le ft cen ter T able le g 15 15 204143[...]

6-29 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-M Step 12 Attach th e left most T able le g. Figur e 25 lef t Most T able Leg 15 15 204144[...]

6-30 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Step 13 Attach one mi crop hone to each table se gmen t. There ar e three micr ophone s for the table. The cent er mic rophon e cable for the ta ble must be seated in the cable chan nel on the u nderside of the c[...]

6-31 Cisco TelePre sence System 3000 OL-14521-01 Chapter 6 Building th e Table As sembly Building the Table Assembly, P roduct ID CTS3K-M Step 14 Attach t he table door to the ta bletop sections and at tach the “pleas e close ” label to the un dersid e of the table door . Figur e 27 Lef t Connec ting T ablet op Section 204145 11 15 29 16 30 17[...]

6-32 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 6 Building the Table Assembly Building the Table A ssembly, Product ID CTS3K- M Step 15 Attach the Acces sory cabin ets to the left and rig ht attachmen t brac kets and cov er the visib le scre w holes in the cabinet body with th e cabinet hole cov er . Figur e 28 A ccessory ca binets Note T[...]

CH A P T E R 7-1 Cisco TelePre sence System 3000 OL-14521-01 7 Assembling the Remai ning Cisco TelePresence Elements Revised: October 31, 2008, OL- 14521-01 Parts List Key Part Description Part Number Qty Ctn Notes Camera and Camer a Assembly ( Fig ure 7-1 ) 1 Camera assembly 68 -2900-06 1 2 8 M8 x 20 mm scr ews 48-2273- xx 4 1 Use d to attac h to [...]

7-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Ether net an d Pow er I/O Conn ecti ons 1 I/O bla nk: l arge 70 0-2380 6-xx 2 1 2 I/O bla nk: sma ll 700-2 3807-xx 6 1 3 I/O m odules: p ower/Ethern et 74-xxxx- xx 6 1 Part num ber ch ange s per cou ntr y or re gion. Ref[...]

7-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List 5 M4 x 12 mm s crews 48-10 45-xx 20 1 6 M4 washers 49-0735- xx 20 1 Audio /Vide o Ext ensi on Un it 1 Mounti ng br acket fo r audi o/vid eo ex tension unit 700-2 6833-xx 1 1 For codec s with a single microp hone co nnection[...]

7-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Note Note that th e ke y numbers r estart for e ach elem ent. War ni n g Only trained and qualified personnel s hould be allowed to install , replace, or service this equipment. Note Th e direc tions left and right re fe[...]

7-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 1 Place the ass embly o v er the cent er displ ay , then attach the Camer a Assembly t o the Camera Ass embly bracket . For clarity , the d isplay has been remo ved from the illustrati on in Figure 7-1 . Note Th ere ar[...]

7-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 2 Attac h the Microp hones t o the left , right, and c enter T able segme nts. The cent er Mic ropho ne cable must be seated i n the cabl e channe l on the und erside of the cent er T abl e segmen t in order to p ro[...]

7-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 3 Assemble the I/O Modul es for the outside left and outsi de right Molded F oam bu mpers. The outsi de left an d outside right Mold ed Foam bumpers on ly have one I/O Module ea ch. The i nner Molded F oam bum pers ha [...]

7-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 4 Assemble the I/O Modul es for the two inner Molded Foam b umpers. The outsi de left an d outside right Mold ed Foam bumpers on ly have one I/O Module ea ch (see Figure 7-3 ). The inne r Molded Foam b umpers ha v e[...]

7-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 5 Attach th e Projector to the Proje ctor mounting brac ket. Figur e 7 -5 Project or Assembly 201168 2 1 5[...]

7-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 6 Attach the Pr ojector moun ting brack et to the u ndersid e of the c enter T able seg ment. a. Insert the scre ws and w asher s in the undersid e of the cente r T able seg ment to prep are for attaching the Pr oj[...]

7-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 7 Attach th e VGA mod ule to the center T able segme nt. The VGA mod ule suppor ts the VGA peripher al cabl e when not in use. Figur e 7 -7 V GA Module 3 201170[...]

7-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 8 Attach the cen ter Pri vac y panel. Figur e 7 -8 Pr iv acy P anel Assembly 2 5 Rotated for c larity 201171[...]

7-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 9 Attach the lef t Pri vac y panel. Figur e 7 -9 Pr iv acy P anel Assembly 1 5 201172 Rotated for c larity[...]

7-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 10 Attach the ri ght Priv acy panel. Figu re 7 -1 0 P riv a cy P anel Ass embl y 3 5 201173 Rotated for c larity[...]

7-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 11 Attach t he ri ght-win g Priv acy pane l. Figu re 7 -1 1 Priv a cy P anel Ass emb ly 4 5 201174[...]

7-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 12 Attach th e Cable man agement ba rs to the three Codecs. Figu re 7 -12 Co dec As sem bly 1 5 3 201175[...]

7-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 13 Attach th e Codec attach ment brackets to the three Cod ecs. Figu re 7 -13 Co dec As sem bly 201176 1 4 5 6[...]

7-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 14 Attach the three Codecs to the Display structure Front foot stabilizer s. Note If you ordere d a Presen tation Codec with yo ur T elePresence system , refer to the Cisco T elePr esence Har dwar e Optio ns an d U[...]

7-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 15 Make a note of the micro phon e co nnec tions on t he fr ont of th e code c and perf orm one of the follo wing actions: • If your code c has o ne m icroph one con nect ion, co mple te the following st eps to inst[...]

7-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st b. Attac h the audio/ video extension unit to th e rear of the di splay asse mbly . Figur e 7 -16 A udio/V ideo Ext ensio n Unit 3 5 1 204147[...]

7-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 16 Attach th e Speake r board brack ets and Le veling fee t to the Speak er boards. The Spe aker boa rd br ackets sh ould a ngle towards the rear of the Displa y struc ture. Figu re 7 -17 Sp eaker Asse mb ly 201178 7 [...]

7-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 17 Attach th e Speake r board s to the Speake r board brack ets on the unde rside of the Display shel ves. Figu re 7 -18 Sp eaker Asse mb ly 201180 6 3 2[...]

7-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 18 Attach th e Speakers to the Speak er boards. Figu re 7 -19 Sp eaker Asse mb ly 1 6 201 179[...]

7-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 19 Attach the Pro jector scre en to the Pro jector clips on the undersid e of the D isplay shelv es. Note Ple ase r efer to your C isco T elePresence Project or Screen Ass embly manual for th e e xact proc edures u[...]

7-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 7 Assembl ing the Re maining Cisc o TelePrese nce Elem ents Parts List Step 20 Attach the auxili ary con trol unit to its b racket using 5 mm scr ew s; then, attach th e unit and brack et to the r ear of the d isplay as sembly . Figu re 7 -21 A uxil iar y Con trol Unit 1 3 5 20414 8[...]

7-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 7 Assembling th e Rema ining Ci sco TeleP resen ce Element s Parts Li st Step 21 Assemble the Lar ge Camera T arget. When yo u slide the C amera ta rge t into the fr ame, ma ke sure the t arg et is center ed in the fr ame betw een the ver tical lines at the top and botto m of the targ et. Fi[...]

CH A P T E R 8-1 Cisco TelePre sence System 3000 OL-14521-01 8 Routing Power and Signal Cables Revised: October 31, 2008, OL- 14521-01 Parts List Cautio n Do not po wer on the PDUs until all the cab les are routed an d connected. War ni n g Overcurrent protection is provided by branch circuit protection rated 20A. Key Part Description Part Number Q[...]

8-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st War ni n g Output receptacles cannot exceed 15A for any one receptacle. Cautio n Correct routin g of the v arious power co rds to the appropria te PDU is critica l for the saf ety and success of the Cisco T elePrese nce System 3200 asse mbly . Ea[...]

8-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 1 Attach th e two left Po wer Distrib ution Units (PDU) to the left Acce ssory cabinet. The acc essory cabinets ea ch have scre w holes for two PDUs on one side wall and scr ew holes for one PDU on the other . When the ca binets are corre ctly[...]

8-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Step 2 Attach the rig ht PDU to the r ight Ac cessor y cabinet . The acc essory cabinets ea ch have scre w holes for two PDUs on one side wall and scr ew holes for one PDU on the other . When the ca binets are corre ctly oriented wit h each door [...]

8-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 3 Attach the cen ter PD U to th e center pr iv acy panel. Figur e 8-3 T able assembl y PDU attac hment t o the c ent er Pr iv ac y pane l Note Th e PDU power cable shoul d extend from the ri ght side. 1 201184[...]

8-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Step 4 Route th e power cables for the tabl e leg foam bumpe r I/O module s and the projec tor . Figur e 8-4 Routing P ow er Cabl es for I/O M odules and Pr ojector Note The six jumper cords fro m the I/O modules in the table le gs route to the c[...]

8-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 5 Rout e the signal cab les from the tab le assemb ly . Figur e 8-5 Routing Signal cables from the T able assemb ly Note Th e T a ble Leg Sig nal cabl es are routed behind the Display structure , alo ng wit h the o ther signa l cab les, but do[...]

8-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Step 6 Connect th e Cisco Unified IP Phon e, VGA periphe ral, and proj ecto r HD video cabl es. Note Th e VGA Pe riphe ral c able is the free- hanging cabl e re sting in the VG A modul e at tached to th e ce nter Ta b l e s e g m e n t . Figur e [...]

8-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 7 Connect the mic rophon e cable s. • If you h ave a codec with t hree microp hone out puts , conne ct th e mic rophon es using Figu re 8-7 as a guide. Cable the micropho nes using th e following marki ngs and co lors on the code c: – A si[...]

8-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Figur e 8-7 Connecting t he Micr ophones F or a Thr ee-Micr ophone Outlet Codec Microphones 205771 TelePresence 3 D E F 6 M NO 9 WXY Z # 2 A B C 5 J K L 8 T UV 0 O PER 1 4 G H I 7 P Q R S C IS CO I P P HON E 797 0 14[...]

8-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Figur e 8-8 Connect ing the Mi cr ophones f or a Codec with O ne Micr ophone Outlet and a n A udio/V ideo Ext ension Unit 205760[...]

8-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Step 8 Connect the speaker ca bles us ing the foll owing markings an d colo rs on the codec : • A single dot on a gre en backg round i ndicates a ce nter speaker . • T wo dots on a w hite back ground i ndica te a left speaker . • Three dot[...]

8-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 9 Conn ect t he follo wing cable s: • Attach an d route the po wer cable s for the lighting assem bly by con necting the lights to the au xiliary contro l unit. • Connec t the seri al cable be tween the projec tor and the au xiliar y cont[...]

8-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Step 10 Conn ect t he p lasm a di spla y cabl es. Figur e 8-1 1 Cabling the Plasma displays Note Figur e 8-11 displ ays the re ar view of the Cisco T e lePresen ce System 320 0. Left a nd right are reversed. Ti p Before yo u plug cable s into a [...]

8-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 11 Con nect th e ca mer a ass embl y cabl es. Figu re 8-12 C abl ing t he Cam era asse mbl y Note Th e came ra clust er ca n experien ce rad io fre quency inte rfer ence issues if the ca mera Et hern et and video cables are routed , bundled, [...]

8-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Step 12 Conn ect th e code c signa l cabl es. Note If you ordered a Presentati on Codec or Auxilia ry Control Unit with your T elePresence system, r efer to the Cisco T elePresence Hardwar e Options and U pgrade Gu ide for ca bling inst ructions[...]

8-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 13 Conn ect th e code c power cable s. Figu re 8-14 R out ing the Code c P ower C abl es Power 201206[...]

8-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st Step 14 (Option al) If you r instal latio n uses an optio nal exter nal disp lay or a docum ent cam era, i nstall an d route the cabl ing. Figur e 8-15 Cabling Diag ram : CTS-300 0 Installa tions wi th an Ext e r nal Displa y and Docum ent Camer[...]

8-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 8 Routing Power an d Signal Cables Parts List Step 15 (Option al) If your install ation uses an extern al displa y or a docume nt came ra with a present ation cod ec, install and route th e cabling. Refer to the “Options f or the Cisco T elePres ence System 3000” chapter of the Cisco T el[...]

8-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 8 Routing Power and Sign al Cables Parts Li st[...]

CH A P T E R 9-1 Cisco TelePre sence System 3000 OL-14521-01 9 Firs t-Time Setup Revised: February 6, 200 9, OL-14521- 01 After you have assembled t he Cisco T elePrese nce Sy stem (C TS), you set up the in dividual system compone nts (such as displays a nd camera s) usin g Hardware S etup , locat ed under T roubleshooting in the CTS Administrati o[...]

9-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Loading CTS Admi nistration Software Note M ake sure that you p ower on all codecs withi n 30 second s to avoid power on detectio n failu re. After yo u turn on the co decs, th e displa ys associa ted with each codec bec omes acti ve. CTS dis plays green ch eck marks on a[...]

9-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Loading CTS Administration Software Figur e 9-2 S ystem IP A ddr ess Note Not e If the IP a ddress that displays i s 192.1 68.100.2, the CTS-300 0 coul d not conta ct the DH CP server or your system doe s not use DH CP . If your ne twork does not use DHCP , navigate to Confi[...]

9-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Configuring an A lternate TF TP Server (Op tional) Step 5 From the Cisco IP te lephone welco me pag e, pre ss Next . The system r eboots. Note Th e system migh t reboot sev eral times duri ng the initi al start up process. Step 6 Open a browser on a com puter that is conn[...]

9-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts Step 2 From T roubleshooting , cho ose Hard war e Se tup to initially se t up the componen ts in the Cisco T elePrese nce system. Cisco sug gests that you set up CTS comp onents in the following order : • Setting Up the Di splays, page 9-5 • [...]

9-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Troub leshootin g Disp lays Use Ta b l e 9-1 to tro ubleshoot p roblems with the images on t h e display s. Ta b l e 9-1 T r ouble shooting Char t for Displa y Pr oblems Prob lem Possible Cause Action Cisco TelePresence 3000/3200 only Pow er- on [...]

9-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts Setting Up the Camer as The cam eras are set up co rre ctly when ima ges are cent ered an d in f ocu s on the disp lay s cree ns and the white ba lance has be en conf igured . The ha rdw are se tup so ftwa re pro vides a came ra Auto Adjust featu[...]

9-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Note If one of the left /righ t screws is covered by the camer a cable, use the other scr ew to make all left/right adjust ments. Figur e 9-3 Camer a Mounting Plat e 201205 Up/down scre w Left/right screws Rotation screws Lens[...]

9-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts Figur e 9-4 Cor rect Ca mer a T arg et Alignment—Cent er Displa y Figur e 9-5 Cor rect Ca mer a T arg et Alignmen t—Right Displa y Red plu s s ign within bl a ck cro ss Red line s Note cur ved line s touching s creen border T a bl e edge 2057[...]

9-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Figur e 9-6 Cor rect Camer a T ar get Alignmen t—Left Dis pla y • Click Hid e Came ra T ar get to remo ve th e al ignment i mages. • Click Done when you co mplete the adjustmen t. Show All C amer a Targ ets • Click Show Al l Camera T arg[...]

9-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts Figur e 9-7 At tac hing the Cam era Hood Assemb ly 201203 7 7 2 1 3[...]

9-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Troub lesho otin g Came ras Use Ta b l e 9-2 to troublesh oot prob lems with camer as. Ta b l e 9-2 T r ouble shooting Char t for Camer a Pro blems Prob lem Possible Cause Action Cisco TelePresence 3000/3200 only Camera image appe ars on the wro[...]

9-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts Setting Up the Sp eakers The speake rs are set up co rrect ly you can hear sound clea rly from ea ch one . Y ou can cho ose whet her you want to cycle thr ough the spe akers aut omatic ally or manual ly . • Click Speaker s on the Hardware Setu[...]

9-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components microp hones per scr een, d ependi ng on the numb er of micr ophone s install ed. The t op microp hone represe nts the mi cro phone in th e front row; the bott om micro phone icons repre sent th e back row microphon es. • Click Micr ophones on[...]

9-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts Setting Up the Projector This se ction contai ns the steps t hat y ou pe rform t o set up the proje ctor and incl udes th e fo llowing sections: • Standard CTS- 3000 Proje ctor Setup , page 9-15 • Project or Setup W ith an Auxiliary Control [...]

9-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 3 Set the display to display right- side up b y completi ng the f ollo wing steps: a. Press the MENU key on the remot e contr ol. Note The menu screen will appear upside do wn and re versed. If the image is right-side up, contin ue to Step [...]

9-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts d. Press the Right Ar row key an d se lec t Normal . e. Press th e Left Arrow key to confirm your se lecti on. Step 9 Eliminate o verscan by completing th e follo wing steps: a. Press the Up Arro w and Down Arr ow keys and highlight Pict ur e ad[...]

9-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Step 12 Select the screen size by c ompletin g the f ollo wing steps : a. From th e ma in me nu, us e th e Up Arro w and Do wn Arrow ke ys to highligh t the Scr een fu nct ion. Press the Right Ar row key to select t he Scr een sub- menu. b. Use [...]

9-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts If the input im age is displ aying correc tly , you shoul d see an image projec ted on the projec tion su rface. Step 17 If the image is out of focus or is too small, use the projecto r focus ring to focus the image and use the zoom le ver to c [...]

9-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components c. Press OK until the g roup number setting chan ges to 100 . d. Press the Down Arro w key until the No. setti n g chan ges to 4 . e. Press the Le ft Arrow ke y until the Data setti ng changes to 0 . f. Press the ON -OFF key to end th e ser vice[...]

9-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 9 First-Time Setup Set ting Up CTS Com ponen ts Troubleshooting Prese ntation Devices Use Ta b l e 9-5 to troublesh oot probl ems with pre senta tion devices. Ta b l e 9-5 T r ouble shooting Char t for Pr esentation Device Pr oblems Prob lem Possible Cause Possible Solution T est patt ern is [...]

9-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 9 First-T ime S etup Setting Up CTS Components Note Th e Cisco T elePresence System can displa y information from mul tiple input de vices during a meeting; if multiple inp ut dev ices are sending inform ation, the projec tor displays the inpu t from the last pres entati on de vice sending i[...]

CH A P T E R 10-1 Cisco TelePre sence System 3000 OL-14521-01 10 Use & C are Guide Revised: October 31, 2008, OL- 14521-01 Maintaining the Tabletop Cautio n W axin g or rubbi ng the surface with a ny type of abr asiv e is not re commen ded. • F or genera l daily ca re - use a damp ened cloth with clean w ater . • To r e m o v e d i r t - us[...]

10-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Ch apter 1 0 U se & Car e Gui de Main tain ing the P roj ecto r Maintaining th e Projector Note Refer to the Pro jector User Guid e inclu ded wi th you r proje ctor f or mainte nanc e iss ues such as cl eaning the pro jector len s. T o replace th e proj ector lamp, s ee the “Repl acing the Pro[...]

CH A P T E R 11-1 Cisco TelePre sence System 3000 OL-14521-01 11 Field-Replaceable Unit Guid e Revised: October 31, 2008, OL- 14521-01 This chap ter de scribe s the steps you perfo rm to rep lace the field -repla ceabl e units (FR Us) for the Cisco T elePres ence syst em and includ es the follo wing sections : • Replacing the C amera Cluster—Pa[...]

11-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Camera Cl uster—Part Numbe r CTS3K-CAM-CLST-G 2 • The Release Notes for Cisco T elePre sence System fo r your softwa re rele ase • Po wer scre wdri ver with 2.5, 3, and 6 mm (s tand ard o r rou nd) A lle n bits , or stand ard 2.5, 3, an d [...]

11-3 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl acing a Plas ma Display— Par t Num ber CT S-DISP- 65-GE N2 Step 6 Reattac h the Ether net and sig nal cab les acco rding to yo ur tempor ary ma rkings. Do not attach th e came ra hoods a t this time. Step 7 Open a br o wser on a comp uter co nnected to[...]

11-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN2 Cisco TelePresence 3000 Structure, Acce ssory, and Adjustment Assembly : • Po wer scre wdri ver with 2.5, 3, and 6 mm (s tand ard o r rou nd) A lle n bits , or stand ard 2.5, 3, an d 6 mm Alle n wre[...]

11-5 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl acing a Plas ma Display— Par t Num ber CT S-DISP- 65-GE N2 • If your pro jector sc reen d oes not have side trims an d is flush w ith the di splay cab inet, gra sp the out er edges o f th e scre en a nd pull it up and away from the Projecto r cl ips [...]

11-6 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Plasma D isplay—Part Number CTS-DISP-65-GEN2 Step 3 Loosen each cam lock cou pling . Step 4 Unscrew the l eft Di splay shelf f rom th e two Di splay Shelf su pport brackets. Step 5 Pull the left D isplay shelf a way from the center Di splay shel[...]

11-7 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl acing a Plas ma Display— Par t Num ber CT S-DISP- 65-GE N2 See Chapter 3, “Mounting and Le ve ling the Plasma Display s” . Step 13 If r equired, at tach the camer a cluster . See Chapter 7, “ Assembling the Remain ing Cisco T elePresence Elements[...]

11-8 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Speake r—Part Number CTS- LDSPKR Replacing a Spe aker—Par t Number CTS-LDSPKR Required Info rmation, Tools, and Equipmen t T o rem ove and replace a speaker fo r the Ci sco T e lePresenc e 3 000, yo u need t he following i nformati on, tools, [...]

11-9 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacin g a Speake r—Part Number CT S-LDS PKR c. After yo u ha ve cr eated a g ap of appro ximatel y 1/2 inch (1 centimete r) be tween the scr een and the displ ay shelf, d etac h the hol es on the t op scree n from th e loca ting pins o n the unde rsid e [...]

11-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Codec Uni t—Part Nu mber CTS-CODEC-PRI -G2 (Primary Codec) or CTS- CODEC-SEC (Secon dary Codec) Replacing a Codec Unit—Part Nu mber CT S-CODEC-PR I-G2 (Primary Codec) or CTS-CODEC-SEC (Second ary Codec) Required Info rmation, Tools, and Equip[...]

11-11 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl acing a Codec Uni t—Part Number CTS-C ODEC-PRI -G2 (Pr imary Cod ec) or CTS- CODEC-SE C (Se condar y Codec) See Chapter 7, “ Assembling the Remain ing Cisco T elePresence Elements” f or addi tional inf ormation. Step 5 Remove the co dec from t he [...]

11-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Micr ophone —Part Numbe r CTS-MIC Replacing a Micro phone—Part Number CTS-MIC Required Info rmation, Tools, and Equipmen t T o remo ve an d repl ace a micro phone for the Cisc o T elePresence 3 000, you ne ed the follo wing inform ation, tool[...]

11-13 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Micr ophone —Part Nu mber CTS -MIC Step 5 If you are re placi ng the ce nter mi croph one, follow the se steps. a. Loosen, but do n’t remove, the mounti ng screws holdin g the proj ector a ssembly t o the und erside of the cent er table top.[...]

11-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Lig ht Fixture— Part Numb er CTS-LIGH T-FI XT Replacing a Light Fix ture—Part Number CTS-LIGHT-FIXT Required Info rmation, Tools, and Equipmen t T o disasse mble an d reassem ble port ions of the Cisc o T el ePres ence 3000 , you nee d the fo[...]

11-15 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing the Aud io/Vide o Ext ension Unit—Part Number CTS-AV- EXP Step 3 For the right and left ver tical light f ixtures, foll ow these steps. a. Remo ve the scre ws from the ligh t f ixture holding b racket. The br acket is locate d in the middle o f [...]

11-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the A udio/Video Ex tension Unit— Part Num ber CTS-AV-EXP Step 6 Po wer on the system b y turning the p o wer switches to th e On position on the tw o left PDU s, single right PDU, and (i f prese nt) au xiliary control u nit or PDU on the re ar c[...]

11-17 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replaci ng the Cisco IP Phone—Pa r t Number C P-7975G-CT S Replacing the Cisco IP Phon e—Part Number CP-7975G-CTS Step 1 Open a br o wser on a comp uter co nnected to the netw ork. Step 2 T ype in the IP address of the Cisco Unif ied Communicatio ns Mana[...]

11-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing the Pro jector Lam p—Part Number CTS-PR JTR-BL-G EN1 Note Y ou might have to remove the screws and remove the assem bly durin g this step , rathe r than loosen the screws. Be sure to secur e the proj ector when you rem ove the screws. c. Remov e [...]

11-19 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Repl acing th e Proj ecto r—Part Number CT S-PR JTR- GEN1 Replacing the Projec tor—Part Number CTS-PRJTR-GEN1 Step 1 Po wer of f the projecto r by turning off the power switch located on the back of the unit. Step 2 Unplu g the V GA cable fr om the back [...]

11-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a PDU—Part N umber CTS-PWR-PDU Replacing a PDU—Part Numb er CTS-PWR-PDU There are tw o PDUs attache d to the left access ory cab inet, o ne atta ched t o the r ight a ccessor y cabi net, one PDU att ached t o the under side of the tablet op, an[...]

11-21 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replacing the Auxiliary Con trol Unit—Part Number CTS-LIGHT-CTRL Replacing the Auxili ary Control Unit—Part Numbe r CTS-LIGHT-CTRL The auxiliary co ntrol unit is located in the center of the display assembl y . For more information abou t the aux iliary [...]

11-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Displ ay Shelf Note M ake sure to retain all screws, connecto rs, and other pa rts during th e disassembl y . Removi ng and Replac ing a Displa y Shelf R ow Tab le Sectio n Step 1 Po wer of f the system by completing turning of f the following un[...]

11-23 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Tab le Top S ecti on Cautio n Make sure that al l remain ing shel ves stay on the displa y structu re an d do not fall betwee n the str ucture supports. Ti p Slide the shelv es to the left; ther e is space on the left that is created b y the ope[...]

11-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Ta ble Top Sect ion Removin g and R eplacin g a Tab le Top Sec tion Step 1 Open the t able door . Step 2 Perform the follo wing actions for specif ic table top sections: • If you are repla cing t he ta ble do or or the le ft-ce nter t able t op[...]

11-25 Cisco TelePre sence System 3000 OL-14521-01 Chapter 1 1 Field-Replace able Unit Guide Replac ing a Tab le Top S ecti on Step 18 Insert the dra w bolts and tighten them between the ne w table top sect ion and the adjoini ng table top sections. Se e Chapter 6, “Building the T able Assembly” for the location of the dra w bolts. Step 19 Attac[...]

11-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Chapter 11 Field-Replaceable Un it Guide Replacing a Ta ble Top Sect ion[...]

A- 1 Cisco TelePr esence Syste m 3000 OL-14521-01 APPENDIX A Appendix A: Parts List Sorted by Carton Revised: October 31, 2008, OL- 14521-01 Overview • Each carto n may contain multiple parts. Some of these part s are grouped together in kits. Each kit is a smaller box contained within the ‘master’ car ton. • Each kit box is ide ntif ied wi[...]

A- 2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-FUR-M APLE Tabl e Shelf and Ta ble Sectio n Assembli es 78-177 92-02 Cisc o T elePres ence Me eting Q u ick R eferen ce documen t N/A 78-1779 5-02 Cisco T elePres ence 3000 Assem bly , Use & Ca re, and Field Repl acement [...]

A-3 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton List f or CTS3 K-FUR-MAP LE Table S helf and Table S ection Asse mblies Carton 2 of 47: Cam era Assem bly, 800-28 487-xx, CT S3K-CAM -CLUST Carton 3 of 47 : Primary C odec, 800-28191-xx, CTS-CODE C-PRIM Carton 4 of 47 : Second ary Cod ec, 8[...]

A- 4 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-FUR-M APLE Tabl e Shelf and Ta ble Sectio n Assembli es Carton 5 of 47 : Second ary Cod ec, 800- 2820 2-xx, CT S-CODE C-SE C Carton 6 of 47: Proj ector, 74 -4824-xx , CTS-PRJ TR-GE N1 Carton 7 of 47: S peaker, 74-4 740-xx, CT[...]

A-5 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton List f or CTS3 K-FUR-MAP LE Table S helf and Table S ection Asse mblies Cart on 10 of 47 : Power Cord , 37-0 8xx-x x, PW R-COR D10-x x Carton 1 1 of 47: Camera Brack et, 69-162 7-xx, CTS3K -STRU CTURE Carton 1 2 of 47: Brack ets, 69-1 632-x[...]

A- 6 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-FUR-M APLE Tabl e Shelf and Ta ble Sectio n Assembli es Carton 14 of 47: Front Foot Stab ilizer, 69-1624-xx, CST3K-STRUCTURE Carton 15 of 47: Front Foot Stab ilizer, 69-1624-xx, CST3K-STRUCTURE Carton 16 of 47: Front Foot Sta[...]

A-7 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton List f or CTS3 K-FUR-MAP LE Table S helf and Table S ection Asse mblies Carton 19 of 47: Auxiliary Contro l Unit, CTS-LIGHT-CTR L, 74-5405-01 Carton 20 of 47: Plasma Display, 7 4-4881- xx, CTS -DISP-65- GEN2 Carton 21 of 47: Plasma Display,[...]

A- 8 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-FUR-M APLE Tabl e Shelf and Ta ble Sectio n Assembli es Carton 2 4 of 47: Projector Bracke t, 69-1 631-xx, CT S3K-STR UCTURE Cart on 25 of 47: Fo am Bumper s, 69 -1634-x x, CTS3 K-ST RUCTURE Carton 2 6 of 47: Ligh ting Ass em[...]

A-9 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton List f or CTS3 K-FUR-MAP LE Table S helf and Table S ection Asse mblies Carton 27 of 47: Light Fi xture, 74 -5361-x x, CTS- LIGHT-FIXT Carton 28 of 47: Light Fi xture, 74 -5361-x x, CTS- LIGHT-FIXT Carton 29 of 47: Light Fi xture, 74 -5361-[...]

A-10 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-FUR-M APLE Tabl e Shelf and Ta ble Sectio n Assembli es Carton 31 of 47: Light F ixture, 74-536 2-xx, CT S-LIGHT- FIXT Carton 32 of 47: Camer a Targe t, 69-167 4-xx, CTS- CAM-TOOL Carton 3 3 of 47: Displa y Stru cture Cros sb[...]

A-11 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carton List f or CTS3 K-FUR-MAP LE Table S helf and Table S ection Asse mblies Carton 3 6 of 47: Display S tructu re, 69-16 22-xx, C TS3K-STRUCT URE Carton 3 7 of 47: Display S tructu re, 69-16 22-xx, C TS3K-STRUCT URE Carton 3 8 of 47: Spare Flu[...]

A-12 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-FUR-M APLE Tabl e Shelf and Ta ble Sectio n Assembli es Carton 4 1 of 47: Tabletop Le g Base , 69-1620-x x, CTS3 K-STRUCTURE Carton 4 2 of 47: Access ory Cab inet, 69-163 7-xx, CT S3K- FUR-MAPL E Carton 4 3 of 47: Access ory [...]

A-13 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carto n List for C TS3K- M Table She lf and Tab le Sect ion Assemb lies Carton 4 5 of 47: Tabletop, 69 -1639-x x, CTS3K-FU R-MAPLE Carton 4 6 of 47: Displa y She lf, 69-1 640-xx , CTS3K -FUR-M APLE Cart on 47 of 47 : Spea ker Boar ds, 69-1641 -xx[...]

A-14 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-M Tabl e Shelf and Ta ble Sectio n Assembl ies 37-08 54-0 1 6 m video cab le 1 Chapter 8 37-088 7-02 3 m Cat6 E thern et c able, b lack 5 Chapter 8 37-0 901-01 10 m Cat6 E therne t cab le, b lue 4 C hapter 7, 8 69-1656 -03 47[...]

A-15 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carto n List for C TS3K- M Table She lf and Tab le Sect ion Assemb lies Carton 2 of 44: Cam era Assem bly, 800-28 487-xx, CT S3K-CAM -CLUST Carton 3 of 44 : Primary C odec, 800-28191-xx, CTS-CODE C-PRIM Carton 4 of 44 : Second ary Cod ec, 800- 28[...]

A-16 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-M Tabl e Shelf and Ta ble Sectio n Assembl ies Carton 5 of 44 : Second ary Cod ec, 800- 2820 2-xx, CT S-CODE C-SE C Carton 6 of 44: Proj ector, 74 -4824-xx , CTS-PRJ TR-GE N1 Carton 7 of 44: S peaker, 74-4 740-xx, CT S-LDSPKR[...]

A-17 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carto n List for C TS3K- M Table She lf and Tab le Sect ion Assemb lies Carton 9 of 44: S peaker, 74-4 740-xx, CT S-LDSPKR Cart on 10 of 44 : Power Cord , 37-0 8xx-x x, PW R-COR D10-x x Carton 1 1 of 44: Camera Ass embly Brac ket, 69-1 627-xx , C[...]

A-18 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-M Tabl e Shelf and Ta ble Sectio n Assembl ies Carton 1 3 of 44: Privac y Pan el, Right, 69-1628 -xx, CTS 3K-STRUCTUR E Carton 14 of 44: Front Foot Stab ilizer, 69-1624-xx, CST3K-STRUCTURE Carton 15 of 44: Front Foot Stab ili[...]

A-19 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carto n List for C TS3K- M Table She lf and Tab le Sect ion Assemb lies Carton 1 8 of 44: Access ory Cabi net Bra ckets, 69 -163 0-xx, CTS3K -STR UCTURE Carton 19 of 44: Auxiliary Contro l Unit, CTS-LIGHT-CTR L, 74-5405-01 Carton 20 of 44: Plasma[...]

A-20 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-M Tabl e Shelf and Ta ble Sectio n Assembl ies Carton 2 3 of 44: Ligh ting Ass embly, 69-16 12-xx, CTS3 K-LIGHT-ST R Carton 24 of 44: Light F ixture, 74-536 1-xx, CT S-LIGHT- FIXT Kit ID Number Sub-Kit ID Number Part Number P[...]

A-21 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carto n List for C TS3K- M Table She lf and Tab le Sect ion Assemb lies Carton 25 of 44: Light Fi xture, 74 -5361-x x, CTS- LIGHT-FIXT Carton 26 of 44: Light Fi xture, 74 -5361-x x, CTS- LIGHT-FIXT Carton 27 of 44: Light Fi xture, 74 -5362-x x, C[...]

A-22 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-M Tabl e Shelf and Ta ble Sectio n Assembl ies Carton 3 0 of 44: Displa y Stru cture Cros sbars, 6 9-1623-xx , CTS3K -STRUCTU RE Carton 3 1 of 44: Privacy Pan els, 69-1 629-xx, CT S3K-STR UCTU RE Carton 3 2 of 44: Display S t[...]

A-23 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carto n List for C TS3K- M Table She lf and Tab le Sect ion Assemb lies Cart on 35 of 44: Sp are F luore scent Bulb s for Li ght Fi xture, 74-5232 -xx, CTS-3000 -SPR-BUL BS Carton 3 6 of 44: Projector Screen , 74-5416-x x, CTS3 K-SCREEN Carton 3 [...]

A-24 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-M Tabl e Shelf and Ta ble Sectio n Assembl ies Carton 4 0 of 44: Tabletop Le g Base , 69-1620-x x, CTS3 K-STRUCTURE Carton 4 1 of 44: Ligh ting Ass embly, 69-16 13-xx, CTS3 K-LIGHT-ST R Carton 4 2 of 44: Projector Bracke t, 6[...]

A-25 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix A Appendi x A: Parts List Sorted by Cart on Carto n List for C TS3K- M Table She lf and Tab le Sect ion Assemb lies Carton 4 4 of 44: Tableto p Sections, D ispla y Shelves , and S peake r Board s, 69-183 5-01, C TS3K-M Kit ID Number Sub-Kit ID Number Part Number Part Description Qty Chapte[...]

A-26 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix A Appendix A: Part s List Sorted by Carton Carton List fo r CTS3K-M Tabl e Shelf and Ta ble Sectio n Assembl ies[...]

B-1 Cisco TelePr esence Syste m 3000 OL-14521-01 APPENDIX B Appendix B: Region- and Country-Specific Equip ment Revised: October 31, 2008, OL- 14521-01 The fol lo wing countrie s and re gions ha ve equipment manufactu red to l ocal re gulations: Asia Pacific Argentina Part Description Part Number Qty Notes T e lePresence Po wer Cord PWR- CORD10-AP [...]

B-2 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix B Appendi x B: Region- and Country-Sp ecific Equipment Aust ralia Australia Central Europe China India, UAE, South Afri ca Part De scrip tion P art Numb er Qty Not es T e lePresence Power Cord PWR-CORD10-A U 37-0 840-01 6 I/O modul es: power/Ethernet CTS-L APCONN- A U 74-4 866-01 6 Part Desc[...]

B-3 Cisco TelePr esence Syste m 3000 OL-14521-01 Append ix B Appendi x B: Region - and Count ry-Specif ic Equipm ent Israel Israel Italy Japan North America Par t Descr iptio n Part Num ber Qt y Not es T e lePresence Power Cord PWR- CORD10-ISR 37-0842- 01 6 I/O m odules : po wer/Eth ernet CTS- LAP CONN-ISR 74-4863- 01 6 Part Description Part Number[...]

B-4 Cisco Tele Presence Syste m 3000 OL-14521-01 Appendix B Appendi x B: Region- and Country-Sp ecific Equipment Switze rland Switze rland United Ki ngdom Part Description Part Number Qty No tes T e lePresence Po wer Cord PWR-CORD10-SWI 37-0843- 01 6 I/O module s: power/Ethernet CTS-LAPCO NN-SWI 74-4862- 01 6 Part Description Part Number Qty N otes[...]