Cisco Systems 3120 manual

Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco Catal yst Blade Switc h 31 20 f or HP Hardware Installation Guide Marc h 20 08 THE SPECIFICATIONS AND INFORMATION REGARDING THE PRO DUCTS IN THIS MANUAL ARE SUBJEC[...]

THE SOFTWARE LICENSE AND LIMITED WARRA NTY FOR THE ACCOMPANYING PRO DUCT ARE SET FORTH IN THE INFORMATIO N PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCOR PORATED HEREIN BY THIS REFERENCE. IF YOU AR E UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTAC T YOUR CISCO REPRESENTATIVE FOR A COPY . The follow ing in formatio n is f or FC[...]

3 Cisco Catalyst Blad e Switch 3120 for HP Hardware Insta llation Gui de OL-12246-01 CONTENTS Preface 7 Audienc e 7 Pur pose 7 Organi zation 7 Conv enti ons 8 Rela ted Publi cati ons 8 Obtain ing Docu mentat ion, Obt aining Su pport , and Secur ity Gui deline s 9 CHAPTER 1 Product Ove rview 1 Switch Module Fea tures O vervi ew 1 Other Fe atur es 3 [...]

Cont ent s 4 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Insta lling th e Switc h Module in th e Blade Enclosur e 6 Switch Module IP Ad dress es 8 Using th e Onboar d Administ rato r to Assign an IP Addr ess to the Swi tch Modul e and Run ning Expr ess Setup 9 Using Exp ress Se tup 11 Setti ng the I nstalle d [...]

Content s 5 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Cable an d Adapte r Specifi cation s 4 10-G igabit Ethe rnet X2 Tra nscei ver Module C able Speci ficati ons 4 SFP Module Cable Sp ecific ation s 6 Two T wiste d-Pair Cabl e Pino uts 6 Four Tw isted- Pair Cable Pino uts for 1000BASE-T Ports 7 Identi fyi n[...]

Cont ent s 6 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01[...]

7 Cisco Catalyst Blad e Switch 3120 for HP Hardware Insta llation Gui de OL-12246-01 Preface Audience This guide is for the netwo rking or computer tech nician responsible for installing the Cisco Catalyst Blade S witch 312 0 for HP , re ferr ed to as the switc h module , in the HP c-Class Blad eSystem s erve r enclo sure , referr ed to a s the HP [...]

8 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Preface Conv ent io ns Appendix B, “Connec tor and Ca ble Specif ications, ” describes the connecto rs, cab les, and adapter s that can be used to conne ct to th e switch mo dule. Appendix C, “Conf iguring th e Switch wi th the CLI -Based Setup Program, ” h[...]

9 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Pre face Obtaining Documentation, Obtaining Support, and Security Guidelines • Cisco Softwar e Activa tion Docume nt for H P • These c ompatibil ity matrix doc uments are a va ilable f rom this Cisco.com site : http://www .cisco.com/e n/US/products/hw/modules/p[...]

10 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Preface Obtainin g Docume ntation , Obtaining Sup port, and Se curity G uidelines[...]

CH A P T E R 1-1 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 1 Product Overview This ch apt er provides a function al overview of the Ci sco C atalyst Bl ade Sw itch 3 120 fo r HP , re ferred to as t he switch module . The switc h module is installed in the HP c-Class Blad eSystem enclo sure, referre d to as t[...]

1-2 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 1 Produc t Overview Switch Modul e Feature s Overvi ew The CBS3120 X switch module sup ports bot h the Cisco X 2 transc eiv er module s and the Cisco T winGig Con verter Module . The CBS3 120G switc h modul e support s only the Cisco T winGi g Conv erter [...]

1-3 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 1 Product Overv iew Othe r Fea tur es The switc h mo dule i s powered f rom t he blade e nclos ure ba ckpl ane, a nd t empera ture manage ment i s provided by the blad e encl osure . T here is no fan on the switch module . See th e software configuration [...]

1-4 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 1 Produc t Overview Oth er Fe atur es 10/100/1 000 Ports The 10/1 00/10 00 Ethern et ports use stand ard RJ-45 con nector s with Et hernet pinout s. The maxi mum cable l ength is 328 f eet ( 100 m eters) . The 1 00BASE-TX and 1000BASE-T t raff ic requi re[...]

1-5 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 1 Product Overv iew Othe r Fea tur es LEDs Y ou can use the switch LEDs to monitor switch module activ ity and performan ce. Graphical represe ntatio ns of the LEDs desc ribed in these secti ons are visible in the device manager . • Syst em L ED, pa ge [...]

1-6 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 1 Produc t Overview Oth er Fe atur es Stack Master LED The Stack Master LED (MSTR) shows the stack master status. Ta b l e 1-3 lists the LED col ors and th eir meaning s. Stack Member LED The St ack Me mber LED (M MBR) s hows the sw itch stack membership [...]

1-7 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 1 Product Overv iew Othe r Fea tur es The port acti vity LED blinks green to indica te traf fic. 10-Gigabit Ethernet Module Slot Por t LEDs The behavior of t he 10-Giga bit Ethe rnet mod ule slot por t LEDs depe nds on wh ether an X2 module or a conv erte[...]

1-8 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 1 Produc t Overview Managem ent Option s LED Behavior in Stack Mode Whether an X2 module or a co n verter modu le is insta lled in the 10- Gigabit Ethernet module sl ots, the two bottom LED s (21 and 22 ) show the status of the Stac kW ise Plus ports 1 an[...]

1-9 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 1 Product Overv iew Manageme nt Opti ons Using the De vice Ma nager The si mplest wa y to m anage the swi tch m odule is by using the d e vice m anager that i s in t he swit ch module memory . This is a web i nterface tha t offers quick configurat ion and[...]

1-10 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 1 Produc t Overview Managem ent Option s Using the Co mmand -Line Interface The switch mo dule CLI i s based on Cisco IOS sof tware and enhan ced to support desktop- switching featu res. Y ou can fu lly co nfigure and moni tor th e switc h modu le f rom [...]

CH A P T E R 2-1 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 2 Switch Instal lation This chapter prov ides instructio ns on ho w to install your Cisco Catalyst Blade Swit ch 3120 for HP , also referr ed to as th e switch module , in the HP c-Cl ass BladeSy stem en closure an d ho w to set up and configure you [...]

2-2 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Preparing fo r Instal lation Safety Warnings These safety warning s are t ransla ted in to several l anguages in the Regulatory C omplianc e an d Safe ty Informat ion for the Cisco Catalyst Blad e Switch 3000 Series for HP th at shi[...]

2-3 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Preparing for Installation Installation Guidelines Before you inst all the switch module in th e blade enclosur e, read these guideli nes: • Rev ie w and become fa miliar w ith the safety and h andling g uidelines specif ied in t [...]

2-4 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Preparing fo r Instal lation Verifying Pac kage Con tents Carefull y rem ove the conten ts fro m the shi pping c ont ainer, and look at each item f or dama ge. If a ny item is missin g or damage d, contact you r Cisco represen tativ[...]

2-5 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation HP c- Cla ss B lad eSys tem Enc losu re Ar chi tect ure HP c-Class BladeSystem Enclosu re Architecture Figure 2-1 sh ows the re ar view of t he blade enclo sure i n w hich y ou inst all th e swi tch mo dule. Figur e 2-1 Rear V iew o[...]

2-6 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Installing th e Switch Modu le in the B lade Enclo sure Installing the Swi tch Module in th e Blade Enclosure Before y ou install the switch module in the b lade e nclosure, con sider these points: • Rev ie w and become f amiliar [...]

2-7 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Installing the Switch Module in the Blade Enclosure Figur e 2-2 Remo ving t he Int er connect Module Blan k fr om th e Blade Enc losur e Step 4 Ensure that th e release latc h on the switch module is in the open position (p erpendic[...]

2-8 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Installing th e Switch Modu le in the B lade Enclo sure Figur e 2-4 Installing the S witc h Module i nt o the Bla de Enclos ur e Int er connect Mo dule Ba y Step 6 Push the release l atch on the fr ont of t he switch module to the c[...]

2-9 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Using the Onboard Administrator to Assign an IP Address to the Switch Module and Running Express Setup Using the Onboard Administra tor to Assign an IP Address to the Switch Module an d Running Express Setup Before you run Ex press [...]

2-10 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Using the O nboard A dminist rator to As sign an IP Address t o the Switch M odule an d Runnin g Express Se tup Figur e 2-5 Onboar d A dminist rat or Inter connect Ba y Summary Window Step 6 Click the IP a ddress hyperli nk for the[...]

2-11 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Using the Onboard Administrator to Assign an IP Address to the Switch Module and Running Express Setup Using Expre ss Setup Before yo u complet e the setup progr am, obta in the default gateway IP address and the swit ch password f[...]

2-12 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Using the O nboard A dminist rator to As sign an IP Address t o the Switch M odule an d Runnin g Express Se tup Step 5 Click Enable in the Daylight Savings T ime f ield to enable this feature. Step 6 In the Te l n e t A c c e s s f[...]

2-13 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Planning and Creating a Switch Stack Step 5 At the prompt , press Retur n . Step 6 Ente r end . Step 7 Ente r copy running-configuration startup-conf iguration to save this set tin g. Step 8 At the prompt , press Retur n . Step 9 T[...]

2-14 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Planning and Crea ting a Switc h Stack • For conditions t hat might cause a sta ck master re- election or t o manually e lect the st ack maste r , see the “Manag ing Switch Stacks” cha pter in the switch module sof tware conf[...]

2-15 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Planning and Creating a Switch Stack Figure 2-9 is an exa mple of a recommended configu ration in which eight switch modules create a switch stack in four bl ade enclo sures. Figur e 2-9 Stack ing Eigh t Sw itch Mo dules in F our B[...]

2-16 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Planning and Crea ting a Switc h Stack Figure 2-10 is a n example of a re commen ded con figurati on in which ei ght swi tch module s crea te two separa te switc h stac ks in fo ur bla de enc losures. This configur ation pr ovides [...]

2-17 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Installing Devices in the 10-Gigabit Eth ernet Slots Step 3 Insert the othe r end of the cable into the con nector of the othe r switch module, and tight en the retainer scre ws to 5 lbf-in. (80 ozf-i n.). Be ca reful not to o ver [...]

2-18 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Installin g Devices i n the 10-G igabit Et hernet Slo ts Cautio n T o prev ent ESD dama ge, fo llow your normal bo ard and com ponen t handling proce dures whe n connec ting cabl es to the swi tch and othe r devices. Installing X2 [...]

2-19 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Installing Devices in the 10-Gigabit Eth ernet Slots Figur e 2-12 Installing X2 T r ansceiv er Modules Cautio n Do not install the con verter module with SFP modules or c ables installed. Al ways remov e an y cables and modules bef[...]

2-20 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Installin g Devices i n the 10-G igabit Et hernet Slo ts Step 5 Reinstall the dust c ov er in t he 10-Gigab it Ethernet sl ot. Cautio n The dus t cov ers shou ld al ways r emain in pl ace unless a module is installe d in the slot. [...]

2-21 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Installing Devices in the 10-Gigabit Eth ernet Slots Step 8 If the module has a bale-clasp latch, close it t o lock the SFP module in place. Step 9 Remov e the SFP dust plugs and save. Install the SFP cables. Figur e 2-14 Conv ert [...]

2-22 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Conne cting to th e 10/ 100/ 1000 P orts Connecting to the 10/100/1000 Ports The sw itch module 10/100/ 1000 ports c onfigure t hemsel ves to op erat e at t he speed of attac hed de vice s. If the a ttache d por ts do n ot suppor t[...]

2-23 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Planning 10/ 100/1000 Ether net Port Connecti ons Note You ca n use the mdix a uto interf ace conf iguration comman d in th e CLI to e nable t he automatic mediu m-depen dent inte rf ace cross ov er (auto-MDIX) f eatur e. When the [...]

2-24 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 2 S witch Installation Where to Go Next Where to Go Next If the defaul t configuration is satisfac tory , the switch mod ule does not ne ed furthe r configurat ion. Y o u can use any of t hese m anagem ent opt ions t o cha nge the default configuratio n:[...]

2-25 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 2 Switch Inst allation Where t o Go Next[...]

CH A P T E R 3-1 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 3 Troubleshooting This c hapter d escrib es the se topi cs for trou bleshooti ng pr oblems: • Diagnosi ng Probl ems, pa ge 3-1 • Clearin g the Switch Modul e IP A ddress a nd Con figuration, page 3-5 • Repla cing a F ailed Stack Mem ber , page [...]

3-2 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 3 Troublesh ooting Diagnosi ng Proble ms Look at the Switch Modu le LEDs Y ou must have physica l acces s to the switch mod ule to do thi s. Look a t the p ort LEDs for trou bleshoo ting informatio n about the switch module. See the “L EDs” s ection o[...]

3-3 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 3 Trouble shooting Diagnos ing Problem s • V erif y that you a re using the co rrec t cable ty pe. See Appe ndix B, “Connec tor and Ca ble Specif ication s, ” for mo re in form ation . • T est for loose connect ions . Somet imes a cabl e appe ars [...]

3-4 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 3 Troublesh ooting Diagnosi ng Proble ms Verify the Switch Module Performance Revie w thi s section when you tro ubleshoo t swit ch module perfor mance problems. Speed, Duplex, and Autonegotiation If the port statistic s sho w a large n umber of a lignmen[...]

3-5 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 3 Trouble shooting Clearing the Sw itch Modu le IP Addre ss and Conf iguration Clearing the Switch Module IP Address and Co nfiguration This section descri bes how to r eset the switch module by rerunning the initial conf iguration dialog (system configur[...]

3-6 Cisco Cataly st Blade Switch 3120 for HP Hard ware Installation Gui de OL-12246-01 Chapter 3 Troublesh ooting Locating the Switch Module Serial Number Locating the Swit ch Module Se rial Numb er If you con tact Cisco T ec hnical A ssistan ce, you n eed to k now the seria l numbe r of yo ur switch module . Figure 3-1 shows the seria l numbe r lo[...]

3-7 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Chapter 3 Trouble shooting Locatin g the Switch Mo dule Serial Number[...]

A- 1 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 APPENDIX A Technical Specifications This appendi x lists the switch module technical sp ecif ications in Ta b l e A-1 . See the Re gulatory Complianc e and Safety Information for the Cisco Catalyst Blade S witch 30 00 Series for HP for information abo ut safety [...]

A- 2 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendi x A Technica l Speci ficat ions[...]

B-1 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 APPENDIX B Connector and Cabl e Specifications This a ppend ix desc ribes the c ables and a dapte rs that you use to con nect th at you use t o conn ect the switch mo dule to othe r devices. This app endix in cludes the se secti ons: • Connector Specif ications[...]

B-2 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendi x B Connector a nd Cabl e Speci fica tions Connector Spe cificatio ns Connecting to 10BASE-T- and 100BASE-TX-Compatib le Devices When co nnec ting th e por ts to 10BASE-T - and 10 0B ASE-TX -compa tibl e devices, su ch as se rvers, workstati ons, and r ou[...]

B-3 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Append ix B Connector an d Cable Specifi cations C onnec tor Specif ications 10-Giga bit Ethern et Module In terfac es The 10- Gigabit Ethe rnet m odules use SC connec tors or Infiniba nd 4x co nnecto rs, as s hown in Figure B-2 a nd Figure B-3 . Figur e B-2 1 0-[...]

B-4 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendi x B Connector a nd Cabl e Speci fica tions Cable and Ad apter Speci ficatio ns Console P ort The co nsole port uses a n 8-p in RJ -45 conn ecto r, wh ich is descri bed i n Ta b l e B-4 and Ta b l e B-5 . The supplied RJ-45- to-DB- 9 adapt er ca ble is use[...]

B-5 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Append ix B Connector an d Cable Specifi cations Cabl e and Adapt er Speci ficati ons X2-10GB-CX4 — Inf iniBand (copper ) — — 49 feet (15 m) X2-10GB- LRM 1310 MM F 62.5 62.5 50.0 50.0 50.0 160 200 400 500 1500 220 m (722 feet ) 220 m (722 feet ) 220 m (722 [...]

B-6 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendi x B Connector a nd Cabl e Speci fica tions Cable and Ad apter Speci ficatio ns SFP Module Cable Specifications Ta b l e B-3 lists the cable specif ications for the f iber-optic SFP module connections. Each port must match th e wa v e-length sp ecif icatio[...]

B-7 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Append ix B Connector an d Cable Specifi cations Cabl e and Adapt er Speci ficati ons Four Twis ted-Pa ir Cable Pin outs for 1 000BA SE-T Ports Figure B-8 a nd Figure B-9 show the s chem atics of four t wisted -pair cable s for 10/100/10 00 por ts on the switch m[...]

B-8 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendi x B Connector a nd Cabl e Speci fica tions Cable and Ad apter Speci ficatio ns Identifying a Crossover Cable T o identi fy a cr ossover cable , compa re th e two mod ular ends of the cable . Hol d the ca ble ends side-by-side , with the tab at the back. T[...]

B-9 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Append ix B Connector an d Cable Specifi cations Cabl e and Adapt er Speci ficati ons Ta b l e B-5 Con sole P ort Sig naling Using a DB-25 A dapt er Switch Cons ole Port (DT E) RJ-45-to- DB-25 T ermin al Ad apter Cons ole Devi ce Signal DB-25 Pin Signal RT S 5 CT[...]

B-10 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendi x B Connector a nd Cabl e Speci fica tions Cable and Ad apter Speci ficatio ns[...]

C-1 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This a ppend ix provides a qui ck installa tion a nd set up pro cedure for the swi tch m odule by u sing the comm and-l ine i nte rface ( CL I). Note For detaile d installatio n procedures, see Ch[...]

C-2 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendix C Configuring the Switch with the CLI-Based S etup Program Accessi ng the CLI Throu gh the Co nsole Port Com ple te th ese ste ps: Step 1 Connec t one end o f the conso le cable to the switch mo dule con sole po rt. Conn ect the ot her end o f the cable [...]

C-3 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Progr am Accessi ng the CL I Throug h the Co nsole Po rt Figur e C-1 Connect ing thr ough th e S witch Module Conso le P ort Step 2 Start t he term inal emula tion sessi on so that yo u can see th e o[...]

C-4 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendix C Configuring the Switch with the CLI-Based S etup Program Accessi ng the CLI Throu gh the Co nsole Port Conf igure the baud rate and char acter for mat of the PC or te rminal to ma tch these co nsole p ort def ault char act eris tics : • 9600 bau d ?[...]

C-5 Cisco Catalyst Blad e Switch 3120 for HP Hardware Inst allation Gui de OL-12246-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Progr am Accessi ng the CL I Throug h the Co nsole Po rt Step 2 Enter a hostna me f or the switch module after the pr ompt, and p ress Return . The hostname is limited to 20 charac ters. Do not use -n[...]

C-6 Cisco Catalyst Blade S witch 3120 for HP Hardware In stalla tion Guide OL-12246-01 Appendix C Configuring the Switch with the CLI-Based S etup Program Accessi ng the CLI Throu gh the Co nsole Port ! interface Vlan1 no shutdown ip address 10.0.0.1 255.255.255.0 ! interface GigabitEthernet0/1 ! interface GigabitEthernet0/2 . . . (output truncated[...]

IN-1 Cisco Catalyst Blad e Switch 3120 for HP Hardware Insta llation Gui de OL-12246-01 INDEX Numerics 10/100/10 00 ports cable l ength s 4, 23 connec ting t o 22, 23 conn ectors and cables 1 to 2 describe d 4 descript ion 4 recomm ende d ca bles 24 10-Gigab it Etherne t module slots de scribe d 4 A accessin g the devi ce mana ger 24 adap ter pino [...]

Index IN-2 Cisco Catalyst Blade Switch 3120 for HP Hardware Install ation Guide OL-12246-01 config urati on exam ples , network 3 connect ing the stac king cables 16 to 10/ 100/100 0 ports 22 to conso le port 4 connec tion p roce dures 22 to 23 conn ectors and cables 10/100/10 00 ports 1 to 2 console port 4 to 9 console port connect ing 3 conn ecto[...]

Inde x IN-3 Cisco Catalyst Blad e Switch 3120 for HP Hardware Insta llation Gui de OL-12246-01 L LEDs Health 6 port 6 POST results 1 stack 5 stack master 6 stack memb er 6 system 5 troubleshoo ting with 1 to 2 UID 6 lightning ac tivity warning 2 link status trou bleshooti ng 2 M managing the sw itch m odule using SNMP 10, 24 using the CLI 10, 24 us[...]

Index IN-4 Cisco Catalyst Blade Switch 3120 for HP Hardware Install ation Guide OL-12246-01 R recomm ende d con figura tions for stacki ng 14 requirements for installin g the switch module 3 RJ-45 co nnecto r, console port 4 S safety and ha ndling gui delines 3 safety warnings 2 serial number lo cati on 6 SFP modules bale-cla sp latch removal 21 ca[...]

Inde x IN-5 Cisco Catalyst Blad e Switch 3120 for HP Hardware Insta llation Gui de OL-12246-01 W warnings Class 1 laser 2 defined 8 disposal of product 2 elec trica l code s 2 Ethernet c able shield ing 2 Ether net port connect ions 2 installati on 2 installati on instructions 2 jewelry r emoval 2 lightning ac tivity 2 overhea ting pr eventi on 2 t[...]

Index IN-6 Cisco Catalyst Blade Switch 3120 for HP Hardware Install ation Guide OL-12246-01[...]