Cisco Systems Cisco CRS-1 manual

Americas Hea dquarters Cisc o Syst ems , Inc . 170 West Ta sman Driv e San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 527-0883 Cisco CRS-1 Carrier R outing S ystem 4-Slot Line Card Chassis Installation Guide May 20 08 Text Pa rt Numbe r: OL -10971-0 7[...]

THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RE COMMENDATIONS IN T HIS MA NUAL ARE BELI EVED TO BE ACCURATE BUT ARE P RESENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY P[...]

iii Cisco CRS-1 C arrier Routi ng System 4-Sl ot Line Card C hassis Installati on Guide OL-10971-07 CONTENTS Preface vii Obje ctive vii Audienc e vi i Document Orga nizati on viii Document Conv entions viii Relat ed D ocum ent atio n ix Changes to This Do cument x Obtain ing Docu mentat ion x Cisco. com x Produc t Documen tation DVD xi Orderi ng Do[...]

Cont ent s iv Cisco CRS-1 Carr ier Routing Syst em 4-Slot Line C ard Chassis Install ation Guide OL-10971-07 Instal ling and Remo ving Power Component s 2- 1 About Inst alling and Removi ng the Power Compo nents 2-1 Basic Ch assi s Po wer R ec omme nda tion s 2-1 Suppleme ntal Unit Bondi ng and Ground ing Gui deline s 2-2 Powe ring the Chas sis Up [...]

Content s v Cisco CRS-1 C arrier Routi ng System 4-Sl ot Line Card C hassis Installati on Guide OL-10971-07 Insta lling a Pill ow Block 4-14 Removing a P illow Block 4-16 How to Ins tall or Re move a Sw itch F abr ic Car d 4-18 Switc h Fab ric Ca rd Loca tion and S lot Nu mber s 4-18 Insta lling a Sw itch F abr ic Car d 4-1 8 Removing a S witch Fab[...]

Cont ent s vi Cisco CRS-1 Carr ier Routing Syst em 4-Slot Line C ard Chassis Install ation Guide OL-10971-07 Envir onmenta l Speci ficat ions A-3 I NDEX[...]

vii Cisco CRS-1 C arrier Routi ng System 4-Sl ot Line Card C hassis Installati on Guide OL-10971-07 Preface This preface explai ns the obje ctives, intende d audi ence , and organiza tion of Ci sco CRS- 1 Carrier Routing S ystem 4-S lot Line C ar d Chassis Instal lation Guid e and descr ibes th e conv entions that conv ey instruct ions and ot her i[...]

viii Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Preface Document Orga nization This gui de contains the fo llo wing chapters and ap pendixes : • Chapter 1, “Overview , ” provides an introduction to the v arious line card chassis system s and components. This chapter also prov ides the recomme[...]

ix Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 Pre face Cautio n Means re a d e r b e c a re f u l . Y ou are capab le of doing som ething that migh t result in equipment damag e or loss of data. Note Means r eader take not e . Notes contain helpful suggest ions or r eference s to mat erials not [...]

x Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Preface Changes to This Document Ta b l e 1-1 lists the technical changes mad e to this document since it was f irst printed. Obtaining Documentation Cisco documen tation and additio nal literature are av ailable o n Cisco.c o m. This secti on explain s [...]

xi Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 Pre face Product Docu mentation DVD The Product D ocu mentat ion DVD is a l ibrar y of tec hnica l produc t docu ment ation on a por table mediu m. The D VD enables y ou to access instal lation, conf iguration, and comm and guides for Cisco hardware [...]

xii Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Preface Reporting Se curity Problems in Cisco P roducts Cisco is committed to deli vering secure p roducts. W e test our products in ternally b e fore we rele ase them, and we striv e to correct all vulnerabilities quickly . If you think that you hav e[...]

xiii Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 Pre face Obtaining Tech nical Assistance Cisco T echnica l Support provides 24-hou r-a-day award-win ning techn ica l assistan ce. The Cisco T echnica l Suppo rt & D ocumen tation web site on Cisco.c om f eatures extensive online sup port resou[...]

xiv Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Preface Submitting a Se rvice Request Using the online T A C Se rvice Re quest T ool is the fa stest way to open S3 and S4 service r eques ts. (S3 and S4 service re quests are those in which your net work is minimall y impaire d or for which you requir[...]

xv Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 Pre face • The Cisco Pr oduct Quic k Refer ence Guide is a handy , compact re ference too l that inclu des brief product overviews, key f eatures , sample par t numbers, and abb reviated technical specifications for many Cisco prod ucts tha t are s[...]

xvi Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Preface[...]

CH A P T E R 1-1 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 1 Overview This cha pter intr oduce s the Cisco CRS-1 Carr ier Routi ng System 4-Slot Li ne Card Ch assis at t he highest le vel. It contains il lustrations of the front a nd back o f the ch assis, complete wit h callouts to each hardw a[...]

1-2 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Ch apter 1 Ov erv iew Chassis Comp onents Chassis Components This secti o n lists the main co m ponents of a Cisco CRS-1 4 -slot line ca rd chassis. It p r imarily iden tif ies the compo nents th at are consi d ered f ield-repla ceable units (F R Us), [...]

1-3 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 1 Overview Chassis Components Figur e 1 -2 Rear (SFC) V iew of the Cisco CR S-1 4-Slot Line Card Chassis The Ci sco C RS-1 4-sl ot line card chass is conta ins the following c omponent s: • As man y as four modular s ervices ca rds (MSCs, a[...]

1-4 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Ch apter 1 Ov erv iew Chassis Comp onents • One or two rout e pr ocessor c ards (R Ps). T he RPs function as th e Cisco CRS-1 4-slo t line c ard chass is system cont rolle r and provide ro ute pr ocessing . Only o ne RP is require d for sys tem opera[...]

1-5 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 1 Overview Chassis Slot Nu m bers Chassis Slot Numbers This section identif ies the location and slot numbers for major cards and modules (primarily the field-replace able units ) that plug into t he Cisco CRS-1 4-slot line card chassis. Figu[...]

1-6 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Ch apter 1 Ov erv iew Chas sis Slot Numbers Figur e 1 -4 Cisco CR S-1 4-Slot Chassis Slot Number ing—Rea r (SFC) Side As shown in Figur e 1-4 , the slot numbers on the SFC side of the chassis in clude : • Fan tra y • Card c age, inc luding f our [...]

1-7 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 1 Overview Chassis Cable Ma nagement Chassis Cable Management The Cisc o CRS-1 4-slo t line ca rd chassi s has cabl e mana gement fe ature s for the fr ont (PLIM ) side of the chas sis, just abov e the card cage. Th e horizontal cabl e manag [...]

1-8 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Ch apter 1 Ov erv iew Chas sis Power Syste m Figur e 1 -6 Airflo w Thr ough the Cisco CR S-1 4-Slot Line Car d Chassis The Cisco CRS- 1 4-slot line car d chassi s airflo w volum e s are as follo ws: • Chassis airf low: Up to 880 cubic fe et (24,9 19 [...]

1-9 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 1 Overview Preventi ng Ele ctrostat ic Discharge Note Revie w the safety war nings listed in Re gulatory Complian ce and Safety Informati on that are appl icable to your r outer b efore insta lling, confi g uring, o r troublesh ooting any ins[...]

1-10 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Ch apter 1 Ov erv iew Recomme nded Chass is Installat ion Task Seq uence Recommended Cha ssis Installation Task Sequence This secti on provid es the recommen ded task sequence for in stalling a new Cisco CRS-1 4-slot line ca r d chass is. Step 1 If yo[...]

CH A P T E R 2-1 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 2 Installing and Removing Po wer Components This ch apter provides inst ructions on how to in stall and r emove the Cisco CR S-1 Car rier Rout ing Syst em 4-Slot Lin e Card Chassis power compon ents. This chap ter pres ents the follo win[...]

2-2 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components About Instal ling a nd Rem oving t he Po wer Com ponents Cautio n A Cisco router must be operated with all its po wer modules installed at all times for ele c tromagneti c compatibilit y (EMC). The Ci[...]

2-3 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents About Installing and Removing the Power Components Figur e 2-1 NEBS Bondin g and Groundi ng P oints (Rear of Cha s sis) If you p lan to conne ct the Cisco CRS-1 4-s lot line ca rd chassis syst em [...]

2-4 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components About Instal ling a nd Rem oving t he Po wer Com ponents Note The DC return of th is system should remain isolated from the system fram e and chassis (DC-I: Isolated DC Return ). Powerin g the Chas si[...]

2-5 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents DC Po wer S ystem s on t he Ci sco CR S-1 4-Sl ot Rou ter Figur e 2-2 A C P ow er Enable S witches For an illustr ation of the DC p o wer enable switch es, see Figu re 2-1 4 on pa ge 2-19 . Note A[...]

2-6 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components DC Power Systems on the Cisco CRS-1 4-Slot Router Figur e 2-3 DC P ow er Shelf: DC P ow e r Input Shelf a nd DC Po wer Input Module (PIM) When i nsta llin g th e DC power sh elf, thes e two co mpone n[...]

2-7 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents DC Po wer S ystem s on t he Ci sco CR S-1 4-Sl ot Rou ter DC Power Shelf Guidelines At sites where the Cisco CRS-1 4-slot line card chassi s is equipp ed with a DC power input shel f and power sup[...]

2-8 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components DC Power Systems on the Cisco CRS-1 4-Slot Router Note Whe n wirin g the D C power shelf, be sure to atta ch the ground w ire first. W hen rem oving the wiring, be sure to remove the ground w ire last[...]

2-9 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents DC Po wer S ystem s on t he Ci sco CR S-1 4-Sl ot Rou ter Input-Po wer-Presen t LEDs The DC power Input -Power-Presen t LEDs provide a vis ual in dicat ion to servi ce per sonn el tha t the re is [...]

2-10 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components DC Power Systems on the Cisco CRS-1 4-Slot Router Ta b l e 2-3 pro vides the co rrelation betw een wire ga uge and th e res istance (in Ohms fo r each 1000 feet of wire ) for copper wire. Ta b l e 2-[...]

2-11 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Installing a DC Power Shelf Installing a DC Power Shelf This section desc ribes how install a DC power shelf in the Cisco CRS- 1 4-slot lin e card chassis. For installati o ns in wh ich A C po we[...]

2-12 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Installi ng a DC Power S helf Prerequisites Bring do wn the po wer to the Cisc o CRS-1 4-slot line card chassis. Ti p W e re comme nd tha t you do t his proc edure with the li ne ca rd ch assis m oun[...]

2-13 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Installing a DC Power Shelf Figur e 2-7 Remo ving the Rear P ow er Acc ess P anels Step 4 Unscre w the coupling scre w from each panel with a medium flat-blade scr ew d ri ver . Set aside the ac [...]

2-14 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Installi ng a DC Power S helf Step 6 Reinsert the No. 2 Phillip s scre ws taken from the rear po wer access panels into their respect ive hole s: one on each si de, t hree in fron t, and one under ne[...]

2-15 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Installing a DC Power Shelf Figur e 2-1 0 P ow er Shelf Coupli ng Screw Conn ecting the Gr oundin g Cable and Powe r Input C ables Step 10 On th e PIM, u se a 10 mm hex socket wr ench to conn ect[...]

2-16 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Installi ng a DC Power S helf Figur e 2-1 1 DC P ow er Shelf Cabl e Cabling Step 12 Reatt ach bot h wiring bl ock cov ers (see Figure 2-11 ). a. Snap t h e co ver o ver the wiring block so that it sn[...]

2-17 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Installing a DC Power Shelf Figur e 2-12 Installing DC Po wer Supplies Step 14 Install the air f ilter (see Figur e 2-13 ). Fo r the procedur e, see the “Installin g the Chassis Air Filter” s[...]

2-18 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Removing a D C Powe r Shel f Removing a DC Power Shelf This section des cribes how to remov e a DC power shelf from th e Cisco CRS-1 4-slot line card chassis. The DC p ower shelf is compri sed of bo [...]

2-19 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Removing a DC Power Shelf Steps T o remo ve the DC po wer shelf, fo llo w these steps: Step 1 Attach the ESD- prev entiv e wrist strap to your wrist an d connect its leash to one of the ESD conne[...]

2-20 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Removing a D C Powe r Shel f Figur e 2-15 Remo ving Wir ing Block Co vers a nd DC Input P ow er Cables Step 6 W ith a 5 mm Allen wr ench, l o osen the po wer shelf co upling scre w (see ite m 2 in Fi[...]

2-21 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Removing a DC Power Shelf Figur e 2-16 Remo ving the DC P o wer Inp ut Shelf b. Holding the DC p ower input sh elf under neath w ith on e han d and stead ying it w ith th e other, lift the DC pow[...]

2-22 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Installi ng a n AC Power Shelf Installing an AC Power Shelf This se ction de scribe s how to instal l an AC po w er sh elf in the Cisco CRS-1 4 -slot line card chassis. The power shelf e ncloses four[...]

2-23 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Remov ing an AC Power Shelf Required Tools and Equipment Y ou need the f ollo wing tools and p a rts to pe rform this task: • ESD-pre venti ve wrist strap • Mediu m flat- blade sc rewdriv er [...]

2-24 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Removing a n AC Power Shelf systems see the “ Abou t Installi ng and Removing the Power Component s” section on page 2-1 . F or complete inf ormation on reg ulatory complianc e and safety , see C[...]

2-25 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Installing a Power Supply Steps T o re move an A C power shelf, fol low these steps: Step 1 Attach the ESD- prev entiv e wrist strap to your wrist an d connect its leash to one of the ESD connec [...]

2-26 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Installi ng a Po wer Supply Figur e 2-20 P ow er Supply Prerequisites Before perf orming t his task, ma ke sure that th e power shelf has been inst alled (se e the “Installing an AC Po wer Shel f?[...]

2-27 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Installing a Power Supply Figur e 2-21 P ow er Supply Door Gr ille in Open P osition Step 4 Slide the po wer supply into the po wer shelf until the con n ector on the back of the module meets the[...]

2-28 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Removing a P ower Sup ply What to Do Next After per forming this task, you ma y connec t the power shelf to th e power source (see t he “ Abo ut Install ing and Re moving the Power Compon ents ” [...]

2-29 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 2 Ins talling and Remov ing Power Co mponents Remov ing a Power S upp ly Steps T o remove a power supply , follow these steps: Step 1 Attach the ESD- prev entiv e wrist strap to your wrist an d connect its leash to one of the ESD connec tion[...]

2-30 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 2 Installing and Rem oving Power Components Removing a P ower Sup ply Step 4 Use you r fre e hand to sup port the power sup ply wh ile you slide the p ower supply c omplete ly from the bay , then set the powe r supply safely aside. What to Do [...]

CH A P T E R 3-1 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 3 Installing and Removing Air Circulation Components This chapter pro vides instructions on how to install and replace the Cisco CRS-1 Carrier Routing System 4-Slot Lin e Card Chassis ai r circulat ion comp onents. This chap ter pres ent[...]

3-2 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 3 Installing and Removing Air Circulation Components About Line Card Chas sis Airflo w Figur e 3-1 Airflo w Thr ough the Cisco CR S-1 4-Slot Lin e Card Chassis A replaceab le air filter is locate d inside the chassis belo w the PLIM card cage a[...]

3-3 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 3 Installing and Removing Ai r Circulatio n Componen ts How to Install or Remove Air Circulation Components Figur e 3-2 S ystem Air Filt ers Note W e recommend th at you check t he air fi lters once a month. Replac e a filt er when you not ic[...]

3-4 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 3 Installing and Removing Air Circulation Components How to Insta ll or Remove A ir Circula tion Compon ents Installing a Fan Tray This section desc ribes how to install a fan tra y in the Cisco CRS-1 4-slot line card c hassis. For informa tion[...]

3-5 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 3 Installing and Removing Ai r Circulatio n Componen ts How to Install or Remove Air Circulation Components Required Tools and Equipment Y ou need the following t ools and part to perform this task: • ESD-pre venti ve wrist strap • Lar ge[...]

3-6 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 3 Installing and Removing Air Circulation Components How to Insta ll or Remove A ir Circula tion Compon ents Cautio n The chassis automat ically power s d o wn if the fan tray is unseated from its connector for more than one minut e. If you pla[...]

3-7 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 3 Installing and Removing Ai r Circulatio n Componen ts How to Install or Remove Air Circulation Components Required Tools and Equipment Y ou need the following t ools to perform this task: • ESD-pre venti ve wrist strap • Lar ge flat- bl[...]

3-8 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 3 Installing and Removing Air Circulation Components How to Insta ll or Remove A ir Circula tion Compon ents Figur e 3-5 Chass is Air Fi lter Prerequisites Before perfor ming this task, you m ust fi rst remove any chassis front cosmetic covers,[...]

3-9 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 3 Installing and Removing Ai r Circulatio n Componen ts How to Install or Remove Air Circulation Components Step 3 Replace the lo wer chassis grille: a. Position the grille in front of t he air intake slot on the lower front side of the cha s[...]

3-10 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 3 Installing and Removing Air Circulation Components How to Insta ll or Remove A ir Circula tion Compon ents Prerequisites Before perfo rming this ta sk, you must f irst remo ve the lower cha s sis grille a nd po wer tray air f ilter cov er (s[...]

3-11 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 3 Installing and Removing Ai r Circulatio n Componen ts How to Install or Remove Air Circulation Components Figur e 3-7 P ow er T ray Air Filter Prerequisites No prerequisites e xist for this task. Cautio n Ne ver operate the line car d chas[...]

3-12 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 3 Installing and Removing Air Circulation Components How to Insta ll or Remove A ir Circula tion Compon ents Step 4 Reinstall the lo wer chassis grille: a. Position the grille in front of t he air intake slot on the lower front side of the cha[...]

3-13 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 3 Installing and Removing Ai r Circulatio n Componen ts How to Install or Remove Air Circulation Components Required Tools and Equipment Y ou need the following t ools to perform this task: • ESD-pre venti ve wrist strap • Mediu m flat- [...]

3-14 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 3 Installing and Removing Air Circulation Components How to Insta ll or Remove A ir Circula tion Compon ents[...]

CH A P T E R 4-1 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 4 Installing and Removing SFCs, RPs, MSCs, PLIMs, and Associated Components This ch apter provides inst ructions on how to in stall and r emove the Cisco CR S-1 Car rier Rout ing Syst em 4-Slot Lin e Card Chassis switc h fabric cards (SF[...]

4-2 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents About Inst alling and Removi ng Cards and Asso ciated Compo nents Guidelines for Card In stallation and Removal This section con tains the general g uidelines for[...]

4-3 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components About Installing and Removing Cards and Associated Components Figur e 4-2 Operatin g Ejec tor Levers Recommended Order for Instal ling Cards Although it is not cr[...]

4-4 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents About Inst alling and Removi ng Cards and Asso ciated Compo nents Guidelines When you install or remo ve cards on the Cisco CRS-1 4-slot line car d chassis, follo[...]

4-5 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Re m ove or I nstall an Impeda nce Carrier Figure 4-3 sh o ws the chassis cable management bracket. Figur e 4-3 Cable Manag ement Brac ket How to Remove or[...]

4-6 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Remov e or Install an Imp edance Carrier Figur e 4-4 S witch Fabr ic Slot Imp edance Car r ier 158394[...]

4-7 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Re m ove or I nstall an Impeda nce Carrier Figur e 4-5 RP Slot Im pedance Ca r r ier 122146[...]

4-8 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Remov e or Install an Imp edance Carrier Figur e 4-6 PLIM Slot Imp edance Car r ier 138972[...]

4-9 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Re m ove or I nstall an Impeda nce Carrier Figur e 4-7 MSC Slot Im pedance Ca r ri er For more infor mation, see th e “Re mov ing an Impe dance Ca rrier [...]

4-10 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Remov e or Install an Imp edance Carrier Removin g an Impedan ce Carrier This se ction descri bes how to re move an im pedan ce ca rrier from the C isco C[...]

4-11 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Remove or Install a Card Slide-Assistance Arm (Han dle) Prerequisites Before per f orming this t ask, open the d oors if the y are installe d and en sure [...]

4-12 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Remov e or Install a Card Sl ide-Assista nce Arm (Handle) Figur e 4-8 Modular Services Ca rd (CR S-MSC) with Slide-Assis tance Ar m Attac hed Removi ng a [...]

4-13 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Remove or Install a Card Slide-Assistance Arm (Han dle) Prerequisites No prerequisites e xist for this task. Cautio n Do not lift car ds by the slide-assi[...]

4-14 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Pil low Block Required Tools and Equipment Y ou need the following t ools and part to perform this task: • ESD-pre venti ve wrist s[...]

4-15 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Pillow Block Prerequisites Before perf orming thi s task, you must f ir st open th e front cosmetic do ors (if inst alled). Ha ve the [...]

4-16 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Pil low Block Figur e 4-9 Installing a Pillow Blo ck Step 6 Install the lo wer right scre w (see item number 2 in Figur e 4-9 ). Step[...]

4-17 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Pillow Block The follo wing items are include d in the CRS-4-PILLBLK= pillo w block replaceme n t kit: • 2 replace ment pi llow bloc[...]

4-18 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Swit ch Fabric Card How to Install or Remove a Switch Fabric Card This se ction conta ins th e fo llowing proc edur es: • Switch Fa[...]

4-19 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Switch Fabric Card Figur e 4- 12 Swi tch Fabric Card Prerequisites Before perfo r ming this task , remo ve the sw itch fabric card ( i[...]

4-20 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Swit ch Fabric Card Steps T o install a switch fabr ic card, see Figure 4-13 and follo w these st eps: Figur e 4-13 Installing a S wi[...]

4-21 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Switch Fabric Card Step 5 Identify th e card slot in the card cage where the switch fa b ric card shoul d be installed. a. If th ere i[...]

4-22 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Swit ch Fabric Card Removi ng a Switch Fabric Card This sect ion describe s how to remove a switch fabric card fr om the Ci sco CRS-1[...]

4-23 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Switch Fabric Card Steps T o remo ve a switch fabric card, see Figure 4-15 and follo w these st eps: Figur e 4-15 Remo ving a Swit ch [...]

4-24 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Swit ch Fabric Card Step 4 T ouching only the metal car d carrier , slide the ca rd from the slot and pl ace it directl y into an ant[...]

4-25 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Route Processor Card • Exam ine the alar m LEDs to see i f ther e are any ac tiv e ala rm cond ition s. • Examine th e power s hel[...]

4-26 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Insta ll or Remove a Route Process or Card Installing an RP Card This section desc ribes how to install a ro ute processo r (RP) c ard in the cha ssis (se[...]

4-27 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Route Processor Card Figur e 4-18 Rout e Pr ocessor (RP) Card Prerequisites 122144[...]

4-28 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Insta ll or Remove a Route Process or Card Required Tools and Equipment Y ou need the following t ools and part to perform this task: • ESD-pre venti ve[...]

4-29 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Route Processor Card Step 10 T o fully seat the ca rd in the midpla ne connector , gras p both ca rd ejecto r lev ers simultaneo usly [...]

4-30 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Insta ll or Remove a Route Process or Card Figur e 4-19 Rout e Pr ocessor (RP) Card 122144[...]

4-31 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Route Processor Card Prerequisites Because c hassis operat ion ma y be i mpacted by the r emoval of an RP card, p erfor m the se task [...]

4-32 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Insta ll or Remove a Route Process or Card Figure 4-20 shows the RP card front pa nel. Figur e 4-20 RP Car d F ront P anel Understanding the LEDs Alph anu[...]

4-33 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Modular Services Card How to Install or Remove a Modular Services Card This se ction conta ins th e fo llowing proc edur es: • Insta[...]

4-34 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Modul ar Servi ces Card Figur e 4-21 Modular Servi ces Card (CRS -MSC) Prerequisites Cautio n Do not carr y an MSC b y the slide-as s[...]

4-35 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Modular Services Card Required Tools and Equipment Y ou need the following t ools and part to perform this task: • ESD- preventi ve [...]

4-36 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Modul ar Servi ces Card Figur e 4-22 Instal ling a Modular Services Card Step 8 Orient th e MSC so that the statu s display is o n to[...]

4-37 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Modular Services Card Note Modular services cards hav e guide pins that make initial contact with the midplane connector as you slide [...]

4-38 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Modul ar Servi ces Card Required Tools and Equipment Y ou need the following t ools and part to perform this task: • ESD- preventi [...]

4-39 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Modular Services Card Figur e 4-23 Remo ving an MSC Step 6 Place t he rem oved MSC on an ant istati c mat, or imme diatel y pla ce it [...]

4-40 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to In stall or Remove a Modul ar Servi ces Card Verifying the Installation of an MSC This se ction describe s how to verify that an MSC has been properly ins[...]

4-41 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Physical Layer Interface Module Troubleshooting the MSC If the installe d or replaced MSC fail s to operate or to po wer up on install[...]

4-42 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Ins tall or Remo ve a Physic al Layer Int erface M odule Figur e 4-26 Ph ysical La yer I nterf ace Module (PLIM) Y ou ca n install a PLIM in any of the fo[...]

4-43 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Physical Layer Interface Module Prerequisites Before perf ormi ng this task, remove any i mpeda nce carr iers. Required Tools and Equi[...]

4-44 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Ins tall or Remo ve a Physic al Layer Int erface M odule Figur e 4-27 Instal ling a PLIM Step 7 Orient th e PLIM so that t he status di splay is on t o p,[...]

4-45 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Physical Layer Interface Module Step 9 Carefully slide the PLIM into the slot until the ejecto r le vers meet the edges of the card ca[...]

4-46 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Ins tall or Remo ve a Physic al Layer Int erface M odule War ni n g Class 1 Laser Product. Stat ement 1 13 War ni n g Class 1 LED product. Statement 1 26 [...]

4-47 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Physical Layer Interface Module Figur e 4-28 Ph ysical La yer I nterf ace Module (PLIM) Prerequisites Before perfor ming this task, re[...]

4-48 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Ins tall or Remo ve a Physic al Layer Int erface M odule Required Tools and Equipment Y ou need the following t ools to perform this task: • ESD-pre ven[...]

4-49 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Physical Layer Interface Module Step 1 Attach the ESD- prev entiv e wrist strap to your wrist an d connect its leash to one of the ESD[...]

4-50 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Install or Remove a PCMCIA Card Troubleshooting the PLIM If th e installe d or replace d PLIM fai ls to oper ate or to po wer up on insta llation: • Mak[...]

4-51 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a PCMCIA C ard Required Tools and Equipment Y ou need the following t ools and part to perform this task: • ESD- preventi ve str ap ?[...]

4-52 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Ins tall or Remove a Small Fo rm-Factor Pl uggable (SF P) Mod ule Steps T o remo ve the PCM CIA card, follo w these step s: Step 1 Attach the ESD- prev en[...]

4-53 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Small Form-Factor Pluggable (SFP) Module Installing a Bale-C lasp SFP Module This section describes how to inst all a bale-clasp SFP m[...]

4-54 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Ins tall or Remove a Small Fo rm-Factor Pl uggable (SF P) Mod ule Figur e 4-33 Instal ling a Bale-Cla sp SFP Module in to a P ort Removin g a Bale-C lasp [...]

4-55 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 4 Installi n g and Removing SFCs, RPs , MSCs, PLIMs, and Associate d Components How to Install or Remove a Small Form-Factor Pluggable (SFP) Module Required Tools and Equipment Y ou need the following t ools to perform this task: • ESD-pre[...]

4-56 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 4 Installing and Remo ving SFC s, RPs, M SCs, PLIMs , and Associ ated Comp onents How to Ins tall or Remove a Small Fo rm-Factor Pl uggable (SF P) Mod ule Figur e 4-35 Remo ving a Bale-Clasp SFP Module Step 5 Place t he rem oved module on an a[...]

CH A P T E R 5-1 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 5 Installing and Removing the Doors an d Grille This chapte r provide s instructions on how to install an d remov e the front doors and inlet grille on the Cisco CRS-1 Carrier Routing System 4-Slot Line C ard Cha ssis. This chap ter pres[...]

5-2 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 5 Installing and Removing the Doors and Grille Insta lling the Inle t Grille Installing the Inlet Grille This sec tion describ es ho w to install the inlet grille. T h e inlet g rille co vers the p ower suppl y and ai r intake areas at the bott[...]

5-3 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 5 Installing and Removin g the Doors and Grille Removing the Inlet Grille Figur e 5-2 Aligning the Inlet Gr ille Step 4 Push the inlet grille to ward the chassis, and snap the ball studs into place. Step 5 Make sure you align the lig ht pipes[...]

5-4 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 5 Installing and Removing the Doors and Grille Instal ling t he Doo rs Steps T o remov e the inlet grille , follo w these steps: Step 1 Attach th e ESD-pre venti ve wrist strap to your wrist an d connect its leash to an ESD connec tion socket o[...]

5-5 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 5 Installing and Removin g the Doors and Grille Ins ta lli ng th e Door s Figur e 5-3 Settin g the Door Int o the Low er Door Mounting Br a ck et Step 4 Drop the door ’ s bot tom gui de pi n into t he lower doo r mou nting bracket h ole (se[...]

5-6 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 5 Installing and Removing the Doors and Grille Instal ling t he Doo rs Ti p Observe that there is a guide pin on top of the knob l atch. Step 7 Keeping the knob l atch at a shall ow angle, ali gn the sec uring p in and gui de pin with the u ppe[...]

5-7 Cisco CRS-1 C a rrier Routin g System 4-Slot Line Car d Chassis Insta llation Guide OL-10971-07 Chapter 5 Installing and Removin g the Doors and Grille Opening t he Doors Figur e 5-6 Closin g the Door Step 10 Repe at th is proc edure for t he ri ght doo r . Opening the Doors T o open the d oors on the Cisco CRS-1 4-slot line c ard chassis , fo [...]

5-8 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Chapter 5 Installing and Removing the Doors and Grille Remov ing the Door s Removing the Doors T o re move the doors f rom th e Ci sco CRS-1 4-slot line c ard ch assis, f ollow these ste ps: Step 1 Open t he doo r you want to remove. Step 2 While suppo[...]

A- 1 Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Installation Gui de OL-10971-07 APPENDIX A Cisco CRS-1 4-Slot Line Card Chassis System Specifica tions This a ppendix provides the speci f ication s for the Ci sco CR S-1 Carri er Rout ing Syste m 4-Slot L ine Ca rd Chassis. It co ntain s the following secti ons: • Compliance an[...]

A- 2 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Appendix A Cisco CRS-1 4-S lot Line Card Chassis System Sp ecification s Cisco CRS-1 4-Slot Line Card Chassis Speci fications Chassis with all components installed (without ex terior cosmetic co mponents and packag ing) 361 lb (163.7 kg) Cards a nd Mo[...]

A-3 Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 Appendix A Cisco CRS-1 4-Slot Line Card Chassis System Specificat ions Environ m enta l Specif ications Environme ntal Specifications Ta b l e A-2 lists the en vironm ental speci fications for the C isco CR S-1 4 -slot lin e card chass is. 1. Protec[...]

A- 4 Cisco CRS-1 Carr ier Routing System 4-Slot Lin e Card Chassis Install ation Guide OL-10971-07 Appendix A Cisco CRS-1 4-S lot Line Card Chassis System Sp ecification s Environ mental Specifica tions[...]

IN-1 Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 INDEX A acoustic noise sp ecification, system A-3 AC power shelf convertin g to DC power 2-11 enable switches (figur e) 2-5 figure 2-22 installing 2-22 removi ng 2-23 weight of 2-25 air c ircul ation com ponents installing 3-1 removi ng 3-3 air fi [...]

Index IN-2 Cisco CRS-1 Ca rrier Routing Sy stem 4-Sl ot Line Card Chassis In stallation Guide OL-10971-07 CRS-1 routing sy stem air fi lter 1-7 airflow and exhaus t 1-8 chassis installation task sequence 1-10 chass is sl ot numb ers 1-5 enviro nmenta l spec ifica tions A-3 line card chassis spe cifications A-1 power system recomm endations 2-1 D DC[...]

Inde x IN-3 Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 F fabri c card (figure ) 4-19, 4-22 installing 4-18 removi ng 4-22 fan tray figure 3-4, 3-6 hot swap ping cauti on 3-6 installati on steps 3-5 installing 3-4 removi ng 3-5, 3-7 Figures AC power enable switc h es 2-5 AC power shelf 2-22 air f[...]

Index IN-4 Cisco CRS-1 Ca rrier Routing Sy stem 4-Sl ot Line Card Chassis In stallation Guide OL-10971-07 groundi ng (figure ) 2-3 ground wire 2-8 guideline s 2-2 H handle, ca rd 4-11 humidity guideli nes, system A-3 I impedanc e carri er about 4-5 MSC ( figure) 4-9 PLIM (fi gure) 4-8 RP (figure) 4-7 switch f abric (figure) 4-6 input-pow er-pre sen[...]

Inde x IN-5 Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 installing (figure ) 4-36 LEDs 4-40 and PLIM s 1-3 removi ng 4-1, 4-37 removi ng (figure ) 4-39 troublesh ooting 4-41 ver ify in g in stal la tio n 4-40 MSC-side slot numbers 1-6 N NEBS bonding (f igure) 2-3 ground ing (figure ) 2-3 Telcordi[...]

Index IN-6 Cisco CRS-1 Ca rrier Routing Sy stem 4-Sl ot Line Card Chassis In stallation Guide OL-10971-07 PLIM 4-41, 4-46 power suppl y 2-28 power tr ay air filter 3-12 RP card 4-25, 4-29 SFP modules 4-52 switch fabric card 4-22 wiring bloc k cove rs 2-19 requir ements airf low exhaus t 1-8, 3-3 DC in put po wer co nnect ions 2-6 routing system air[...]

Inde x IN-7 Cisco CRS-1 C a rrier Routi ng System 4-Slot Line Car d Chassis Insta llation Gui de OL-10971-07 troublesh ooting MSC 4-41 PLIM 4-50 RP card installation 4-32 switch fabric card 4-24 V verify ing MSC installation 4-40 PLIM 4-49 RP card 4-31 switch f a bric card instal lation 4-24 W warnings PLIM instal lation 4-45 wire charac teristic s[...]

Index IN-8 Cisco CRS-1 Ca rrier Routing Sy stem 4-Sl ot Line Card Chassis In stallation Guide OL-10971-07[...]