Cisco Systems UCSSP6C220E manual

Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco U CS C220 S erver Installation and S er vice Guide Covers S erver Generatio n M3 Ap ri l 12, 2013 Text Part Number: OL-25760-01[...]

THE SPECIFICATION S AND INFORMAT ION RE GARDIN G TH E PRODU CTS IN THIS MANU AL A RE SUBJ ECT T O CHAN GE W ITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDA TIONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUS T TAKE FULL RESPONSI BILITY FOR THEIR APPLICAT ION[...]

iii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CONTENTS Preface vii Related Documentation vii Organization vii Audience viii Documentation Feedback viii Conventi ons viii Obtaining Documentation and Submitting a Serv ice Request xiii CHAPTER 1 Overview 1-1 External Features Ov erview 1-1 Summary of Server Features 1-3 CHAPTER[...]

Contents iv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 CHAPTER 3 Maintaining the Server 3-1 Server Monitoring and Ma nagement Tools 3-1 Cisco Integrated Manageme nt Interface (CIMC) 3-1 Server Configuration Utility 3-1 Status LEDs and Buttons 3-2 Front Panel LEDs 3-2 Rear Panel LEDs and Buttons 3-4 Internal Diagnostic LEDs 3-[...]

Contents v Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Cisco Flexible Flash Card Repla cement Procedure 3-40 Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module 3-42 Installing a Trusted Platform Mo dule 3-44 Enabling the In tel Trusted Execution Techn ology (TXT) Feature For the T PM 3-45 Replacing a SCU Upgra[...]

Contents vi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 RAID Controller Cabling C-19 Cable Routing C-19 Cisco UCS C220 Server Cablin g C-20 Backplane and Expander Options C-20 SFF 8-Drive Backplane Cabling C-20 LFF 4-Drive Backplane Cablin g C-22 Restoring RAID Configuration Af ter Replacin g a RAID Controller C-23 For More In[...]

vii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface This preface describes the audi ence, organi zation, and conventions o f the Cisco UCS C220 Server Installation an d Servi ce Guid e . It also pr ovi des informatio n about h ow t o obtain r elated documen tation. Related Documentation The documentation set for the Cisco [...]

viii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Audience This guide is for experien ced network administra tors who configu re and maintain Cisco servers. Documentation Feedback T o provi de technical feedback on thi s document, or to report an er ror or omission, please send your comments to ucs-docfeedback@external.[...]

ix Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface V a roitus TÄRKEITÄ TURVALLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa. T ilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemisee n liittyvät riskit ja tutustu onnettomuuksien yl eisiin ehkäisytapoi[...]

x Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento, tenha conh ecimento dos perigos envolvidos no manu[...]

xi Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de le sões corporais. Antes de trabalhar com qualquer equipam ento, esteja ciente dos riscos que envolvem os circuitos elétricos [...]

xii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface[...]

xiii Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface Obtaining Documentation and Submitting a Service Request For information on obtai ning documentation, submi tting a service request, and g athering additional information, see the monthly What ’ s New in Cisco Pr oduct D ocumentatio n , which also lists all new and rev[...]

xiv Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Preface[...]

CH A P T E R 1-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 1 Overview This chapter provi des an overview of the Cisco U CS C220 server features. External Features Overview , page 1-1 Summary of Server Feat ures, page 1-3 External Features Overview The figures in this chapter show an overview of external server features. (Inte[...]

1-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Figure 1-1 shows the front pa nel features of the SFF driv es version of the server . Figur e 1 -1 Cisco UCS C220 Server (Small For m Fa ctor Dr ives) Fr ont Pa nel Featur es Figure 1-2 shows the front panel features of t he LFF drives version of the server . [...]

1-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 1 Overview Figure 1-3 shows the rear panel features of the server (identical for bot h versions of the server). Figur e 1 -3 Rear P anel Featur es Summary of Server Features Ta b l e 1-1 lists the features of the server . . 1 Power supplies (two) 6 1-Gb Ethern et dedica te[...]

1-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 1 Overvi ew Power Up to two power supp lies, both either 450W or 650W each.  Redundant as 1+1. Do not mix power supply types in the serv er . See Power Specifications, page A-3 for more information on p ower supplies. Cooling Five hot- swappable fan modules for fro nt-[...]

CH A P T E R 2-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 2 Installing the Server This chapter d escribes ho w to instal l the server, and it includes the fo llowing se ctions: • Unpacking and Inspecting t he Server , page 2-2 • Preparing for Server Installation, page 2-3 • Installing the Server In a Rack, page 2-5 •[...]

2-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Unpacking and Inspecting the Server Unpacking and Inspecting the Server Caution When handling internal server co mponents, wear an ESD strap and handl e modules by the carr ier edges only . Ti p Keep the shipping container in case the server requir[...]

2-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Serv er Installation Preparing for Server Installation This section prov ides information abou t preparing for server installation, and it includes the following topics: • Installation Guidelines, p age 2-3 • Rack Requirements, pag[...]

2-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Preparing for Server Installation • Ensure that the air -conditioning meet s the thermal requirements listed in the Server Specifications . • Ensure that the cabinet or rack meets the requirements listed in the “Rack Requirements” section o[...]

2-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Installing the Server In a Rack This section describes how to install the server in a rack. War ni ng T o prevent bodily injury when mounting or servicing this unit in a rack, you m ust take special precautions to ens[...]

2-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack Step 2 Install the slide rails onto the rack: a. Position a slide-rail assembly inside the tw o left-side rack posts (see Figure 2-3 ). Use the “FRONT” and “REAR” markings on the slide- rail assembly to orien[...]

2-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Installing the Server In a Rack b. Push the serv er into the slide rails unti l it stops at the internal stops. c. Push in the plastic release clip on each inner rail (labelled PUSH), and then co ntinue pushing the server int o the rack until its fr[...]

2-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Initial Server Setup This section includes the following topics: • Connecting and Po wering On the Server (S tandalone Mode), page 2-8 • NIC Modes and N IC Redunda ncy Setting s, page 2-11 Connecting and Powering On the Ser[...]

2-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Step 3 Set NIC mode, NIC redund ancy , and choose whether to enabl e DHCP or set static network settings: a. Press the Pow e r button to boot the server . W atch for the prompt to press F8. b. During bootup, press F8 when prompt[...]

2-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup Step 4 Connect to the CIMC for server management. Connect Ethernet cables from your LAN to the serv er, using the ports that you selected b y your NIC Mode setting in Step 3 . The Activ e-active and Acti ve-passi ve NIC redund[...]

2-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Initial Server Setup NIC Modes and NIC Redundancy Settings This server h as the follo w ing NIC mode set tings that you can choose from: • Shared LOM EXT (default)—This is shared LOM extended mode. This is the factory-default setting, along wi [...]

2-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CIMC Firmware System BIOS and CIMC Firmware This section includes inf ormation about the system BIOS an d it includes the foll owing sections: • Updating the BIOS and CIMC Firmware, p age 2-12 • Accessing the System BIOS, page [...]

2-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server System BIOS and CI MC Firmware Accessing the System BIOS T o change the BIOS settings for your server , foll ow these steps. Detailed instructions ar e also printed on the BIOS screens. Step 1 Enter the BIOS setup utility by pressing the F2 key wh [...]

2-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Service Headers and Jumpers This section includes the following topics: • Header Locations on the Motherboard, page 2-14 • Using the BIOS Recovery Header J41, page 2-15 • Using the Clear CMOS Header J37, page 2-1[...]

2-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Using the BIOS Recovery Header J41 Depending on which stage t he BIOS becomes corrupted, you might see dif ferent behavior . • If the BIOS BootBlock is co rrupted, you might see the system get stuck on the following [...]

2-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers Procedure 2: Use Recovery Jumper and recovery.cap File See Figure 2-5 for the location of the J41 header . Step 1 Download the BIOS update package an d extract it to a temp orary locati on. Step 2 Copy the contents of [...]

2-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service He aders and Jump ers Using the Clear CMOS Header J37 See Figure 2-5 for the location of t his header . Y ou can jump er this header to clear the server’ s CMOS settings in the case of a system hang. F or example, if the serv er hangs bec[...]

2-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 2 Installing the Server Service Headers a nd Jumpers[...]

CH A P T E R 3-1 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 3 Maintaining the Server This chapter describes how to diagnose server system problems using LEDs. It also provides i nformation about how to install or replace hardware co mponents, and it includes the foll owing sections: • Server Monitoring and M anagement T ools[...]

3-2 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Status LEDs and Buttons This section describes the location and meaning of LEDs and buttons and includes th e following topics • Front Panel LEDs, page 3-2 • Rear Panel LEDs and Button s, page 3-4 • Internal Diagno[...]

3-3 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s System status • Green—The server is running in normal operating condition. • Green, blinking—The server is performi ng system initialization and memory check. • Amber , steady—The server is in a de graded oper a[...]

3-4 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Rear Panel LEDs and Buttons Figure 3-2 shows the rear panel LEDs and but tons. Ta b l e 3-2 de fines the LED states. Figur e 3-2 Rear P anel LEDs and Butt ons 1 Power supply fau lt LED 5 1-Gb Ethernet link sp eed LED 2 P[...]

3-5 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Status LEDs and Button s 1-Gb Ethernet link speed • Off—link speed is 10 Mbps. • Amber—link speed is 100 M bps. • Green—lin k speed is 1 Gbps. 1-Gb Ethernet link status • Of f—No link is present. • Green—Link is active. • Gree[...]

3-6 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Status LEDs an d Buttons Internal Diagnostic LEDs The server has internal fault LEDs for fan modules and DIMMs. An LED lig hts amber to indi cate a failed component. Note Power must be connected to the serv er for these LEDs to be operate. See F[...]

3-7 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Preparing for Server Component Installation This section descri bes how to prepare for component install ation, and it includes the followin g topics: • Required Equipment , page 3-7 • Shutting Down [...]

3-8 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Preparing for Server Co mponent Installation Removing and Replacing the Server Top Cover T o remove or replace the top cover of the server , follow these steps: Ti p Y ou do not have to remove t he cover to replace hard drives or po wer supplies[...]

3-9 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Preparing for Server Compone nt Installation Replaceable Component Locations This section shows the lo cations of the componen ts that are discussed in this ch apter . The view in Figure 3-5 is from the top do wn with the top cover and ai r baffles[...]

3-10 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Preparing for Server Co mponent Installation Serial Number Location The serial number for th e server is printed on a label on the to p of the server , near the front. Color-Coded Touch Points This server has color -coded touch points that in d[...]

3-11 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Installing or Replacing Server Components War ni ng Blank faceplates and c over panels serve three important functions: they prevent ex posure to hazardous voltages and currents inside the chassis; they c[...]

3-12 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing Hard Drives or Solid State Drives This section includes th e following information: • Drive Populatio n Guidelines, page 3-12 • Drive Replacement Procedure, page 3-13 Drive Population Gui[...]

3-13 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Drive Replacement Procedure T o replace or install a hot-pluggable hard dri ve, follow these steps: Ti p Y ou do not have to shut down or power off the server to replace hard drives or solid state drive s[...]

3-14 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a Drive Backplane Note The Small Form Factor (eight-d rive) and Large For m Factor (four -drive) backplanes and their corresponding chassi s drive bays are factory-config urab le options. Whe[...]

3-15 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-9 Replacing the Dr ive Backplane 1 Captive thumbscrews (two),  securing backplane to chassis floor 5 Backplane (SFF versi on shown removed from server) 2 Supporting hoo ks on chassis (three) [...]

3-16 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing Fan Modules The five fan modules in the server are numbered as follows when you ar e facing the front of the server (also see Figure 3-1 1 ). Figur e 3-1 0 F an Module Numbering Ti p Each fan[...]

3-17 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-1 1 Replacing F an Modules 1 Rubber dampening gasket s (two on each fan module) 3 Fan connector to mot herboard 2 Fan module fault LED on motherboard  (one for each fan module) FAN1 FAN1 FAN1[...]

3-18 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing DIMMs This section includes the following topics: • Memory Performance Guideli nes and Population Rules, page 3-18 • DIMM Replacement Procedure, pa ge 3-22 Caution DIMMs and their sockets[...]

3-19 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-12 DIMM Slots and CPUs DIMM Population Rules Observe the following g uidelines when installing or rep lacing DIMMs: • Each CPU supports fou r memory channels. – CPU1 supports channels A, B, [...]

3-20 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components • Although 1600 MH z DIMMs can be run in Power Saving Mode (1.35 V operation), 160 0 MHz operation is supported only when the DDR mode is set to Performance Mode (see “ Enabling Low-V oltage DIMM O[...]

3-21 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents DIMM Sparing and Rank Sparing DIMM and rank sparing can be enable d in the BIOS configuration utility . Sparing involves utilizi ng one of the DIMM pairs or rank pairs within each memory riser as a sp are[...]

3-22 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components DIMM Replacement Procedure This section includes the following topics: • Identifying a Fault y DIMM, page 3-22 • Replacing DIMM s, page 3-22 Identifying a Faulty DIMM Each DIMM slot has a corresp o[...]

3-23 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing CPUs and Heatsinks This server has two CPU sockets. Each CPU supports four DIMM channels (eig ht DIMM slots). See Figure 3-12 . • The server ca n operate wit h one CPU or two identical C PUs i[...]

3-24 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-13 CPU Heatsink and Sock et Step 2 Remove a protective cap or an old CPU from the so cket (if present): • If you are r emoving an old CPU, skip to Ste p 3 . • If you are installing a new [...]

3-25 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-15 Removing or Inser ting a CPU Step 4 Insert the new CPU into the Pick- and-Place tool: a. Remove the new CP U from the packaging and p lace it on the pedestal that is included in the kit. Alig[...]

3-26 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-16 CPU and Pick-and -Place T ool on Pedestal Step 5 Install a new CPU: a. Set the Pick-and-Place tool with CPU over the empty CPU socket on the motherboard. Note Align the arrow on the to p o[...]

3-27 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Apply about 2 cubic centimeters of grease (about half the syringe con tents) to th e top o f the CPU in the pattern that is shown in Figure 3-17 . Note If you do not have a syringe of t hermal grease, you[...]

3-28 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing the Motherboard RTC Battery War ni ng There is danger of explosion if the battery is replaced i ncorrectly . Replace the battery only with the same or equivalent type rec ommended by the manu[...]

3-29 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-18 Replacing the Motherboard R TC Bat tery Replacing a Mezzanine Card The server has a dedicated socket on the mother board for a mezzanine-styl e RAID controller card. Note See RAID Controller [...]

3-30 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components e. Loosen the s i ngle capt iv e t hum bsc rew th at sec u res the mezzanine card to the motherboard standoff. f. Pull the mezzanine card toward the server front a bout one inch to disengage it from it[...]

3-31 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Riser The server contains two t oolless PCIe risers for horizontal installation of PCIe cards. See Ta b l e 3-6 for a description of the PCIe slot s on each riser . Figur e 3-20 Rear P an[...]

3-32 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Figur e 3-21 Replacing the PCIe Riser 1 Chassis alignment peg for PCIe riser 1 3 Chassis alignment pegs for PCIe riser 2 2 Rear alignment tabs – FAN1 FAN1 FAN1 FAN2 FAN2 FAN2 FAN3 FAN3 FAN3 FAN4 FAN4[...]

3-33 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a PCIe Card Caution Cisco supports all PCIe cards qualified and sold by Ci sco. PCIe cards not qual ified or sold by Cisco are the responsibil ity of the customer . Although Cisco will always st[...]

3-34 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a PCIe Card Note If you are ins talling a Cisc o UCS V irtual Interface C ard, there are prerequisi te considerat ions. See Special Considerations for Cisco UCS V irtual Interface Cards, page[...]

3-35 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents h. If the card that you replaced was a RAID controller , continue with Restoring RAID Conf iguration After Replacing a RAID Controller , page C-23 . Special Considerations for Ci sco UCS Virtual Interface[...]

3-36 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Installing Multiple PCIe Cards and Resolving Limited Resources When a large number of PCIe add- on cards are installed in the serv er, the sy stem may run out of t he following resources r equired for [...]

3-37 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Resolving Insufficient 16-Bit I/O Space The system has only 64 KB of legacy 16-bit I/O resour ces availab le. This 64 KB of I/O space is divided between the CPUs in the sys tem because the PCIe co ntrolle[...]

3-38 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a Cisco Flexible Flash Card This section includes the following topics: • Overview of the Pre-Instal led Cisco Flexible Flash Card, page 3-38 • Enabling a Cisco Flexible Flash V irtual Dr[...]

3-39 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Enabling a Cisco Flexible Flash Virtual Drive Each of the VDs on the pr e-installed Cisco Flexible Flash card can be separately enabled or hidden from the host. The default as shipped fro m the factory is[...]

3-40 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Booting the Hypervisor VD Y ou can boot the hypervisor (HV) VD with a more p e r manen t boot selectio n. (T o change the boot o rder one time, use the procedure in Booting the Cisco SCU and Cisco HUU [...]

3-41 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 2 Install a Cisco Flexible Flash card: Note T o be usable for Cisco Flexible Flash, an SD card must be at least 16 GB in size. Note Any SD card that is installed i nto the Cisco Flexible Flash slot i[...]

3-42 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing the LSI RAID Battery Backup Unit or SuperCap Power Module This server supports installation of one RAID battery backup unit (BBU) or on e SuperCap Power Module (SCPM). The unit mounts to a cl[...]

3-43 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Figur e 3-24 RAID Backu p Unit Mounting Location 1 RAID backup unit mounting location – 1 331725[...]

3-44 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Installing a Trusted Platform Module The trusted p latform m odule (TPM) is a smal l circu it board that attaches to a motherboard socket. The socket location is on the motherboard, below PCIe riser 1 [...]

3-45 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Step 4 V erify that the TPM is now enabled. a. W atch during bootup for t he F2 prompt, and then press F2 to enter BIOS se tup. b. Log into the BIOS Setup ut ility with your BIOS Administ rator password. [...]

3-46 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Step 1 V erify that a TPM is now installed and enab led in the server: a. Either attach a VGA monito r and USB ke yboard to the serv er , or log in remotely to the CIMC interface of the server and open[...]

3-47 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing a SCU Upgrade ROM Module T o remove and replace a module, use the followi ng procedure. Step 1 Prepare the server for component installation: a. Power off the server as described in Shutting Dow[...]

3-48 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Replacing a Software RAID Key Module T o remove and replace a software RAID key modu le, use the following procedure. Step 1 Prepare the server for component installation: a. Power off the server as de[...]

3-49 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Chapter 3 Maintaining the Server Installing or Replacing Server Comp onents Replacing Power Supplies The server can have one or two power supplies. When two power supplies are installed they are redundant as 1+1. • See Power Specifications, page A-3 for mor e information about [...]

3-50 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Chapter 3 Mainta ining the Se rver Installing or Replacin g Server Components Enabling or Disabling the Internal USB Port The factory default is for all USB ports on the server to be enabled. However , the intern al U SB port can be enabled or disabled in the se rv er BIOS. T o [...]

A-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX A Server Specifications This appendix lists t he technical specification s for the server and includ es the following sections: • Physical Specifications, page A-1 • Environmenta l Sp ecifications, page A-2 • Power Specifica tions, pa ge A-3 Physical Specifications[...]

A-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Environmental Specifications Environmental Specifications Ta b l e A-2 lists the environmental speci fications for the server . Ta b l e A -2 En vironmental Specifications Description Specification T empe rature, operating: 41 to 104°F (5 to 40°[...]

A-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix A Server Spec ifications Power Spec ifications Power Specifications The po wer specificatio ns for the two p ower suppl y options are listed in the follo wing sections: • 450W Power Supply , page A-3 • 650W Power Supply , page A-3 Y ou can get more specif ic po wer i[...]

A-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix A Server Sp ecifications Power Specifications[...]

B-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX B Power Cord Specifications This appendix pro vides supported po wer cable specif ications. Supported Power Cords and Plugs Each po wer supply has a separate po wer cord. Standa rd po wer cords or jumper power cords are av ailable for connection to the server . The jumpe[...]

B-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs CAB-9K10A- IT  Pow er Cord, 250 V A C 10 A CEI 23-16 Plug  Italy 8.2 2.5 Figure B-7 CAB-9K10A- SW  Pow er Cord, 250 V A C 10 A MP232 Plug  Switzerland 8.2 2.5 Figure B-8 CAB-9K10A- UK  Pow er Cord,[...]

B-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs AC Power Cord Illustrations This section includes the A C power cord illustration s. See Figure B-1 through Figure B-15 . Figur e B-1 SFS-250V -1 0A-AR Figur e B-2 CAB-9K1 0A -A U Figur e B-3 SFS-250V -1 0A-CN [...]

B-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-4 CAB-9K1 0A -EU Figur e B-5 SFS-250V -1 0A- ID Figur e B-6 SFS-250V -1 0A- IS Connector : VSCC15 Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: M2511 1 8 6576 OVE Cordset rating 16A, [...]

B-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-7 CAB-9K1 0A -IT Figur e B-8 CAB-9K1 0A -SW Figur e B-9 CAB-9K1 0A -UK Plug: I/ 3 G (CEI 2 3 -16) Connector C15M (EN60 3 20/C15 ) Cordset rating: 10 A, 250 V Length: 8 ft 2 in. (2.5 m) 1 8 6575 Plug: [...]

B-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs Figur e B-1 0 CAB-AC-250V/13A Figur e B-1 1 CAB-N5K6A -NA Figur e B-12 CAB-9K12A -NA Cordset rating 1 3 A, 250V (6.6 f eet) (79±2m) Plug: EL 3 12MoldedT wistlock (NEMA L6-20) 1 8 656 8 Connector : EL 701 (IEC60 [...]

B-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix B Po wer Cord Specifications Supported Power Cords and Plugs Figur e B-13 CAB-C13-CBN, Jumper P ower Cord (0.68 m) Figur e B-14 CAB-C13-C14-2M, Jump er Power Co rd (2 m) Figur e B-15 CAB-C13-C14-AC, Jumper P ow er Cord (3 m) Cordset rating 10A, 250V (6 8 6mm) Plug: SS10A[...]

B-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix B Power Cord Specifications Supported Power Cords and Plugs[...]

C-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX C RAID Controller Considerations This appendix contain s the follo wing sections: • Supported RAID Cont rollers and Required Cabl es, page C-2 • Mixing Dri ve T ypes in RAID Groups, page C-5 • Factory- Default Option R OM Settings, page C-4 • RAID Backup Units, p[...]

C-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Supported RAID Cont rollers and Required Cab les Supported RAID Controllers and Required Cables This server supp orts the RAID controller opti ons and cable requirements sh own in Ta b l e C-1 for small form factor d riv es and Ta b l e C-[...]

C-3 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Mixing Drive Types in RAID Groups Mixing Drive Types in RAID Groups Follo wing are the rules for mixing hard disk driv e (H D D) and solid state dri ve (SSD) types in a RAID group with the supported cont rollers. Ta b l e C-2 Cisco UCS C2[...]

C-4 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Factory-Default Option ROM Settings Factory-Default Option ROM Settings Ta b l e C-4 describes the option ROM ( OPROM) settings for card slo ts that are made at the factory for various conf iguratio ns. The versio n of the server and the n[...]

C-5 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Mixing Drive Types in RAID Groups Mixing Drive Types in RAID Groups Follo wing are the rules for mixing h ard disk dri ve (HDD) and solid state dri ve (SSD) types in a RAID group. RAID Backup Units This server supports installation o f on[...]

C-6 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Migration RAID Controller Migration This server supports hardware RA ID (mezzanine and PCIe controller card s) and embedded software RAID. See Ta b l e C-6 for which migrations are allo wed and a summary of migration steps.[...]

C-7 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Embedded MegaRAID Controller Note VMware ESX/ESXi or any other virtualize d en vironmen ts are not supported fo r use with the embedded MegaRAID controller . Hype rvisors such as Hyper-V , Xen, or KVM are also[...]

C-8 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Notes on Supported Embedded MegaRAID Levels The follo wing RAID lev els are supported by the embedded Me gaRAID controller . • RAID 0—Y ou can confi gure a RAID 0 virtual dr iv e (VD) using one or more phys[...]

C-9 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a SCU Upgrade ROM Modu le For Embedded RAID SAS Support The SCU Upgrade R OM module contains a chip on a small circuit board. This modul e attaches to a motherboard header . This chip upgr ades the [...]

C-10 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing a Software RAID Key Module for Embedded RAID 5 Support The software RAID key module cont ains a chip on a small c ircuit bo ard. This module attaches to a motherboard header . This chip upgrades SAS[...]

C-11 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Disabling the Embedded RAID Controller in the BIOS Caution Data migr ation from SW RAID to HW RAID is not supported and could result in data loss. Migrat ions from SW RAID to HW RAID are supported onl y befor[...]

C-12 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Downloading the LSI MegaSR Drivers The MegaSR dri vers are included in the C-series dri ver ISO for your serv er and OS. Download the driv ers from Cisc o.com: Step 1 Find the dri vers ISO f ile do wnload for [...]

C-13 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller d. Copy the e xpanded folder to a USB t humb dri ve. Step 4 Start the W indo ws driv er installation using one of the follo wing methods: • T o install from local media: Connect an e xternal USB D VD driv e[...]

C-14 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Linux Driver Installation This section e xplains the steps to install the embedded MegaRAI D dev ice dri ver in a Red Hat Enterp rise Linux installation o r a SuSE Linux Enterprise Serv er installation. This s[...]

C-15 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 4 If necessary , use this command to change the file name of the dr iv er update disk to a name with fe wer than eight characters: copy dud-[ driver version ].img dud.img Step 5 Open the DOS Co mmand Pro[...]

C-16 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Installing the Red Hat Linux Driver This section describes the fresh i nstallation of the Red Hat Enter prise Linux 5.7, 6.1, or 6.2 devi ce driv er on systems with the em bedded Me gaRAID stack. Step 1 Create[...]

C-17 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller Step 10 Press Enter . The prompt asks whet her you hav e a driv er disk. Step 11 Use the arrow ke y to select Ye s , and then press Enter . Step 12 Select fd0 to indicate that you ha ve a floppy di skette wit[...]

C-18 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Embedded MegaRAID Controller c. Select the check box in the Mapped column for the med ia that you just added, then wa it for mapping to complete . Step 6 Po wer cy cle the ser ver . Step 7 Press F6 when you see the F6 prompt d uring bootu[...]

C-19 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling RAID Controller Cabling This section includes the following topics: • Cable Routing, page C-19 • Cisco UCS C220 Server Cabling, page C-20 Cable Routing The RAID controll er connectors in this server are sho wn[...]

C-20 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Cisco UCS C220 Server Cabling This section contains the following topics: • Backplane and Expander Options, page C-20 • SFF 8-Dri ve Backplane Cabling, page C-20 • LFF 4-Dri ve Backplane Cabling, page C-22 Ba[...]

C-21 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling Cisco UCS RAID SAS 2008M-8i Mezzanine Card This option can co ntrol up to eight d riv es. The required UCSC-CABLE1 cable kit has two mi ni-SAS cables. Cable 1 controls dri ves 1–4 and cable 2 controls dri ves 5?[...]

C-22 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations RAID Controller Cabling LFF 4-Drive Backplane Cabling The cable connections required for each t ype of controller ar e as follo ws: Embedded RAID This option can co ntrol up to four d riv es. The required UCSC-CABLE3 cable kit has two mi [...]

C-23 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations Restoring RAID Configuration Af ter Replacing a RAID Controller Restoring RAID Configuration After Replacing a RAID Controller When you replace a RAID controller, the RAID co nfigu ration that is stored in the controller is lost. Use the[...]

C-24 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix C RAID Controller Considerations For More Information[...]

D-1 Cisco UCS C220 Server Insta llation and Service Guide OL-25760-01 APPENDIX D Installation for Cisco UCS Integration The Cisco UCS integratio n instructions ha ve been mov e d to the inte gration guides found here: Cisco UCS C-Series Server I nte gration wit h UCS Manager Guides Refer to the guide that is for the versio n of Cisco UCS Manager th[...]

D-2 Cisco UCS C220 Server Installation and Service Guide OL-25760-01 Appendix D Installati on for Cisco UCS Integration[...]