Cisco C881-V-K9 manual

Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco we bsite at www.cisco.com/go/ offices. Cisco 80 0 S eries Integrated S ervices Router Hardw are Installation Guide January 28, 20 1 5[...]

THE SPECIFICATION S AND INFORMAT ION REGARDING THE PRODUCTS IN THIS MA NUAL ARE SUBJ ECT TO CHANGE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION , AND RECOMMEN DATIONS I N THIS MANUA L ARE BELIEVE D TO BE ACCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED. USERS MUST TAKE FUL L RESPONSIBILITY FOR THEIR APPLICAT ION OF ANY[...]

1 Cisco Integ rated Serv ices Router H ardware In stallatio n Guide CONTENTS Preface vii Objective vii Audience vii Organization viii Conventi ons viii Related Documentation xvi Searching Cisco Documents xvi Obtaining Documentation and Submitting a Serv ice Request xvi Product Overview 1-1 Cisco 810 Series 1-1 Cisco 812 Series 1-1 General Descripti[...]

Contents 2 Cisco Integrated Servic es Router Hardware Installation Guide C881G-U-K9 ISRs 1-55 HSPA+ Versio ns of th e Fixed-Platform ISRs 1-55 Cisco C881, C886, and C887 Series ISRs 1-55 Cisco C881 Rou ter 1-56 Cisco C886VA Router 1-57 Cisco C886 VAJ Router 1-58 Cisco C887VA Router 1-59 Cisco C887VAM Router 1-60 Cisco C888 Inte grated Services Rout[...]

Contents 3 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Installing the Cisco P oE+ Splitter 2-2 Grounding the Cisco 812 ISR 2-18 Installing the Cisco 8 19 ISR 2-19 Installing the Router 2-22 Mounting the DC Power Supply 2-37 Installing the Cisco 8 60, 880, 890 ISR 2-38 Equipment, Tools, and Connections 2-39 Items Shipped with [...]

Contents 4 Cisco Integrated Servic es Router Hardware Installation Guide Preventing Damage to the Router 3-11 Connecting a PC, Server, or Workstation 3-12 Connecting a Pho ne 3-13 Connecting an External Etherne t Switch 3-14 Connecting the V.92 modem Po rt 3-15 Connecting a Terminal or PC to the Console Port 3-16 Terminal Emulator Settings 3-16 Con[...]

Contents 5 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Router Specifications A-4 Mean Time Between Failure Ground Benign Enviro nment A-8 Supported Power Adapters A-9 Cisco 860, 880, 890 Series A-11 Router Specifications A-12 All Models Except Cisco 860VAE Series A-12 Cisco 860VAE Series A-14 Cisco 860VAE-W-A-K9, Cisco 860VAE[...]

Contents 6 Cisco Integrated Servic es Router Hardware Installation Guide[...]

vii Cisco Integrated Services Router Hardware Installation Guide Preface This preface describes the objectiv es , audience, org anization, and con ventio ns of this guide and describes related docu ments that ha ve additional information. It contains the follo wing sections: • Objecti ve, page vii • Audience, pag e vii • Org anization, page v[...]

viii Cisco Integrated Servic es Router Hardware Installation Guide Organization This guide is or ganized into the follo wing chapters and appendi x. Conventions This section describes the con ventions used in this guide. Note Means reader take note . Notes contain helpful suggestions or ref erences to additional infor mation and material. Caution T[...]

ix Cisco Integrated Services Router Hardware Installation Guide War ni n g IMPORT ANT SAFETY INSTRUCTIONS This warning symbol means danger . Y ou are in a situation that could cause bodily inju ry . Before you work on any equipment, be aware of the haza rds involved with electrical circuitry and be fam iliar with standard practices for preventing a[...]

x Cisco Integrated Servic es Router Hardware Installation Guide Avvertenza IMPORT ANTI ISTRUZIONI SULLA SICUREZZA Questo simbolo di avvertenza indica un pericolo. La situazione potrebbe causare infortuni alle persone. Prima di intervenire su qua lsiasi apparecchiatura, occorre essere al corrente dei pe ricoli relativi ai circuiti elet trici e conos[...]

xi Cisco Integrated Services Router Hardware Installation Guide[...]

xii Cisco Integrated Servic es Router Hardware Installation Guide Avis o INSTRUÇÕES IMPORT ANTES DE SEGURANÇA Este símbolo de aviso significa perigo. V ocê se encontra em uma situação em que há risco de lesõe s corporais. Antes de trabalhar com qualquer equipam ento, esteja ciente dos riscos que envolvem os circuitos elétricos e familiari[...]

xiii Cisco Integrated Services Router Hardware Installation Guide[...]

xiv Cisco Integrated Servic es Router Hardware Installation Guide War ni n g When installing the product, please use the provided or designated connection cables/power cables/AC adaptors. Using a ny other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and Material Safety Law prohibits the use of UL-ce rtified cables (that[...]

xv Cisco Integrated Services Router Hardware Installation Guide War ni n g If the symbol of suitabilit y with an overlaid cross appe ars above a port, you must no t connect the port to a public network tha t follows the European Uni on standards. Connecting the port to this type of public network can cause severe personal injury or can damage the u[...]

xvi Cisco Integrated Servic es Router Hardware Installation Guide War ni n g Read the installation instruc tions before connecting the system to the power sou rce. Statement 1004 War ni n g Ultimate disposal of this product should be han dled according to al l national laws and regulations. Statement 1040 War ni n g The covers are an integral part [...]

xvii Cisco Integrated Services Router Hardware Installation Guide Subscribe to the What’ s New in Cisco Pr oduct Documentation as a Really Simple S yndication (RSS) feed and set content to be deliv ered directly to your deskto p using a reader applicatio n. The RSS feeds are a free service and Cisco currently supports RSS V ersion 2.0.[...]

xviii Cisco Integrated Servic es Router Hardware Installation Guide[...]

CH A P T E R 1-1 Cisco Integrated Services Router Hardware Installation Guide 1 Product Overview This chapter provides an overview of the features a v ailable for the Cisco 812, Cisco 819, Cisco 860, 88 0, 890 Integ rated Services Router (ISR) and contains the follo wing sections: • Cisco 810 Series, page 1-1 • Cisco 860, 880, 890 Series, p age[...]

1-2 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series The 3rd Generation (3G) is a generation of stand ards for mobile technology that f acilitates gro wth, increased in bandwidth, and supports more di verse application s. The Cisco 812 ISR can be po wered by an (included) e x ternal A C adap[...]

1-3 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Figure 1-2 sho ws the 3G antenna and LEDs display . Figur e 1 -2 Cisco 812 ISR 3G and LEDs Displa y 1 2 4 3 344400 1 3G di versi ty antenna 3 Wi F i L E D 2 3G main an tenna 4 3G LED[...]

1-4 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Figure 1-3 sho ws the I/O side of the Cisco 812 ISR. Figur e 1 -3 Cisco 812 ISR I/O Side Hardware Features The Cisco 812 ISR supports the f ollow ing hardware features: • Platform Features, page 1-4 • Antenna, page 1-5 • LEDs, page 1[...]

1-5 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es • Ceiling and W all Mounting O ption • LED indicators for the platform Antenna The Cisco 812 ISR supports 3G e xternal antenna and W iFi embedded antenna. 3G External Antenna The Cisco 812 ISR pro vides tw o standard panel-mount TNC co[...]

1-6 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series RSSI 1 White, Green, Light Bl ue, or Blue (solid) Signal > –60 dBm V ery strong signal White, Green, Light Bl ue, or Blue (three blinks and then a long pause ) Signal <= –60 to 74 dBm Strong signal. White, Green, Light Bl ue, or [...]

1-7 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Ta b l e 1 - 2 describes the W iFi LED for the Cisco 812 ISR. T able 1 -2 Cisco 812 ISR WiFi LED De scr iptions Message T ype Color Description Boot loader status sequence Blinking Green DRAM memory test in prog ress. DRAM memory test is O[...]

1-8 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Memory The Cisco 812 ISR supports 512 MB DRAM and 512 MB compact flash memory . The Host router software runs on the f irst core. The second core runs the WLAN Access Point software. If WLAN is not supported in an SKU, all 512 MB DR AM mem[...]

1-9 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Figur e 1 -4 P oE+ Splitt er I/O Side SKU Information Ta b l e 1 - 3 lists the different SKUs a v ai lable for the Cisco 812 I SR. The AP802-A GN-X-K9 (WLAN PID) is inte grated as part of the router for the SKUs th at support WLAN and is n[...]

1-10 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Cisco 819 Series This section prov ides an ov e rvie w of the features a v ailable for the Cisco 819 and Cisco 819H Inte grated Services Routers (ISRs) and con tains the follo w ing sections: • General Descript ion, page 1-10 • SKU In[...]

1-11 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es than replacing a wired LAN withi n a buildin g or campus. WLANs use radio frequen cy to tran smit and recei ve data o ver the air , minimizing the need for wired connections. Figu re 1-6 sho ws the Cisco 819HGW ISR. The WLAN for 3G Cisco [...]

1-12 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Figur e 1 -6 Cisco 819HGW Integr ated Service s Router Figure 1-7 sho ws the front panel details of the Cisco 819HG I SR. Figur e 1 -7 Cisco 819HG ISR Fr ont Panel 285479 245547 1 4 3 6 7 9 10 11 12 5 8 2 1 3G main an tenna 7 FE ports 2 L[...]

1-13 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Figure 1-8 sho ws the front panel details of the Cisco 819HGW ISR. Figur e 1 -8 Cisco 819HGW ISR F ront P anel 4 3G mini-USB diagno stic port 10 5 VDC molex po wer input 5 Div ersity /GPS ante nna 11 Power swit ch 6 12-in-1 serial port 12[...]

1-14 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Figure 1-9 sho ws the front panel details of the Cisco 819 4G L TE ISR. Figure 1 -9 Cisco 819 4G L TE ISR Fr ont P anel SKU Information Ta b l e 1 - 4 lists the dif ferent 3G SKUs av ailable for the Cisco 819HG and Cisco 819G ISRs. All SK[...]

1-15 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es C819HG-B-K9 Compact Hardened 3G IOS Ro uter with Bharat generic EVD O Rev A based on MC5728V C819G+7-K9 Compact No n-hardened 3G IOS Rout er with Gl obal HSP A + Release 7 based on MC8705 C819G-U-K9 Compact Non-har dened 3G IOS Route r wi[...]

1-16 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Ta b l e 1 - 5 lists the different SKUs a v ailable for the Cisco 819HGW , Cisco 819H, and Cisco 819HWD ISRs. T able 1 -5 Suppor ted SKUs f or Cisco 819HGW , Cisco 819H, and Cisco 819HWD ISRs SKU ID WLAN ID WiFi External Antenna Support D[...]

1-17 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Ta b l e 1 - 6 lists the dif ferent 4G L TE SKUs a v ailable for the Cisco 819H G and Cisco 819G ISRs. T able 1 -6 Suppor t ed 4G L TE SKUs for Cisco 8 19HG -4G and Cisco 81 9G-4G ISRs SKU ID Mode Operating Regions Frequency Band Descript[...]

1-18 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Rebranding of C8xx-B and EHWIC-3G-EVDO-B The C881G-B-K9, C819G-B-K9, and EHWIC-EVDO-B (B harat) SK Us are introduced as an umbrella SKU to cov er BSNL, T ata, and Reliance service pro viders in India. Software based mech anism is introduc[...]

1-19 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Electronic Serial Number (ESN) = 0x60E62431 [09615082545] Preferred Roaming List (PRL) Version = 10 PRI SKU ID = 535479 Carrier ID = 29 Carrier Name = Tata Current Modem Temperature = 30 degrees Celsius Endpoint Port Map = 75 Router# Hard[...]

1-20 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series 256 Compact Flash support in IDE mode (internal) Ye s — — 1 GB Compact Flash support in IDE mode (internal) —Y e s Y e s Cisco EnergyW ise Y es Y es — Dual 802.11 a/ b/g/n Radios with Cisco DFS, CleanAir , and Client Link support [...]

1-21 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Antennas The Cisco 819 3G routers pro vide two stand ard panel-mount TNC connectors to supp ort the 3G an tenna and the di versity and GPS e xternal antenna. The main an tenna is used for the pri mary 3G antenna. The second can b e used a[...]

1-22 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series LEDs The LEDs are located on the front pane l of the router . Ta b l e 1 - 8 describes the 3G LEDs for the Cisco 819 ISR. T able 1 -8 3G LED Descr iptions LED Color Description SYS Y ellow FPGA download i s complete. Green (blinking) R OM[...]

1-23 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Ta b l e 1 - 9 des cribes the WLAN LEDs for the Cisc o 819HGW and Cisco 819HWD ISRs. SIM 1,2 Green / Y ellow (one green blink follo wed by two yello w blinks) SIM in slot 0 activ e, SIM in slot 1 is not. Y ellow / Green (o ne yello w blin[...]

1-24 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Ta b l e 1 - 1 0 describes the 4G L TE LEDs for the Cisco 819 ISR. Operating status Blinking Blue Software upgrade i n progress. Rapidly c ycling th rough Blue, Green, Red, and White Access point location comman d in voked. Blinking Red E[...]

1-25 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es GPS Green (solid) Standalone GPS. Green (slo w blinking) GPS is acquiring. Y e llo w (solid Assiste d GPS. Y ellow (slo w blinking) Assisted GPS is acquiring. Off GPS is not conf igured. RSSI Green (solid) Signal > –60 dBm V ery stro[...]

1-26 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Memory The Cisco 819HG and Cisco 819G ISRs uses non- up gradable flash memory and main memory . The onboard flash memory contain s the Cisco IOS software image an d the boot flash contain s the R OMMON boot code. Ta b l e 1 - 1 1 lists th[...]

1-27 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Supported Cisco Antennas an d Cables The Cisco 819 ISR pro vides two standard panel-mount TNC con nectors to support the 3G antenna and the di versity and GPS extern al antenna. The main antenn a is used for the primary 3G antenna. The se[...]

1-28 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Ta b l e 1 - 1 4 lists the supported Cisco W iFi antenna for Cisco 819HGW and Cisco 819HWD ISRs. T able 1 -14 Supported Cisco WiFi Antenna Antenna Frequency band(s) Mounting Mechanical IP Rating Peak Gain 2.4 GHz (dBi) Peak Gain 5 GHz (dB[...]

1-29 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Ta b l e 1 - 1 5 lists the Cisco 4G L TE antennas that are supported for use on Cisco 819 ISRs. T able 1 -15 Supported 4G L TE Antennas Cisco Part Number Description Maximum Gain and Frequency Ranges Description 4G-L TE-ANTM-D Indoor 4G d[...]

1-30 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 810 Series Ta b l e 1 - 1 6 to Ta b l e 1 - 1 8 list the extension cables fo r use w ith 3G, W iFi, and 4G L TE antennas. The tables include the insertion loss information for the ultra-lo w-loss (ULL) LMR 400 exten sion cables. T able 1 -16 Cisco E[...]

1-31 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 810 Seri es Serial Port The Cisco standard High Speed Smart Seri al 12-in-1 connector all ows t he highest flexi bility of connections to various DTE/DC E de vices. The 12-in-1 serial interf ac e pins connect to the FPGA. The FPGA conf igures the pin[...]

[...]

1-33 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series The vehicle po wer adapters may be us ed for fix ed or mobile i nstallations. The y do not pro vide electrical isolation; the inpu t nega tiv e is connected to the output neg ati ve (ch assis ground). Input cabl e is 350 millime[...]

1-34 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Note For compliance and safety information, see Re gulatory Compliance and Safety Information Roadm ap that ships with the router and Re gulatory Compliance and Saf ety Information for Cisco 800 Series. Note Some illustrations i[...]

1-35 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-7 sho ws the front panel details of the Cisco 860 wireless router . Figure 1 -1 1 Front P anel of the Cisco 860 Ser ies Wir eless ISR Figure 1-12 sho ws the back panel details of the Cisco 861 wireless (861W) ISR. Nonwi[...]

1-36 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco 860VAE Series ISRs The Cisco 860V AE series ISRs are fi xed-con figurati on data routers. This section descr ibes the features of the products in this seri es. Interfaces Ta b l e 1 - 2 0 describes the inte rfaces of th e [...]

1-37 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-13 sho ws the front panel details of the Cisco 866V AE, Cisco 867V AE, Cisco 866V AE-K9, and Cisco 867V AE-K9 integrated services rout ers (ISRs). Figure 1 -13 Fr on t P an el of the Cisco 860V AE series ISR Figure 1-14[...]

1-38 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-15 sho ws the back panel d etails of the C isco 867V AE-K9. Figure 1 -1 5 Back P anel of the Cisco 867V AE-K9 ISR Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E-K9, and Cisco 860VAE-POE-W-A-K9 ISRs This section provides a ha rdw[...]

1-39 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Common Features The follo wing ke y features are common to each of these router models: • Dual W AN interface (Gigabit Ethernet [GE] and dual-mode ADSL2+ /VDSL2) • 2.4 GHz wireless LAN (WLAN) interface • Fi ve Layer 2 LAN [...]

1-40 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Note For the Cisco C867V AE-POE-W -A-K9, Power -ov er -Ethernet (PoE) is a v ailable using port FE0, with a 60-W po wer supply . USB Interface The USB 2.0 interface enables: • T ransferring data usi ng a USB flas h token (USB [...]

1-41 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series LED Indicators on Front Panel The front panel includes seve ral LED indicators. Figure 1-17 shows the location of the LED indicators. Figure 1 -17 Fr ont P anel LED Indica tors 1 LED indicators 346497 Ci s co 8 60 Serie s WLAN 1[...]

1-42 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Ta b l e 1 - 2 5 describes the LED indicators. Cisco 880 Series ISRs The Cisco 880 series ISRs hav e data and v oice capabilities. They hav e the following features: T able 1 -25 Fr ont P anel LED Indicators LED LED Color LED Ac[...]

1-43 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series • Integrated 4- port 10/100 Ethe rnet switch for connecting to the LAN • 10/100 FE, VDSLoPO TS, ADSL over PO TS, ADSL ov er ISDN, DSL Multi-mode (VDSL/ADSLoPO TS, VDSL/ADSLoISDN Cisco V A models only), or G.SHDSL port for co[...]

1-44 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1 -18 Front P anel of the Cisco 880 Series Wir eless Data Router Figure 1-19 sh ow s the back panel details of the Cisco 886V A data router . Figure 1 -19 Back P anel of the Cisco 886V A Router 1 LEDs 3 USB port 2 3G expr[...]

1-45 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-20 sh ows the b ack panel details of the Cisco 887 V A and 886V A-M data router . Figure 1 -20 Back P anel of th e Cisco 887V A and 887V A -M Router Figure 1-21 sho ws the back panel details of the Ci sco 888 W data rou[...]

1-46 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco 880 Series Voice and Data Routers The Cisco 880 series voice and data routers p rovide both voice and data ports. The voice ports managed voice services that interface with F oreign Exchange Station (FXS), F oreign Exchang[...]

1-47 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-22 sh ows the fr ont panel details of the Cisco 881 SRST and Cisco 888 SRST wireless v oice router . Figure 1 -22 Fr on t P an el of the Cisco 881 SRST and Cisco 888 SRS T Wireless V oice Router 1 LEDs 2 USB port 270495[...]

1-48 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-23 sho ws the ba ck panel details of the Cisco 881SRST -W voice router . Figur e 1 -23 Back P anel of the Cisco C881SRST -W V oice Router 1 Primary W AN port 1 —10/100 FE 1. Depending on the router model, the primary [...]

1-49 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-24 sho ws the ba ck panel details of the Cisco 888SRST -W voice router . Figure 1 -24 Back P anel of th e Cisco C888SRS T -W V oice Router Cisco 881-V, Cisco 887VA-V, and Cisco 887VA-V-W Figure 1-25 , Figu re 1-26 , and[...]

1-50 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Note Config uring the codec com plexity sett ing to support se cure calls uses DSP resources, but does not affect the maximum number of suppo rted calls. Figure 1-25 sh ow s the front panel details of the Cisco 881-V , Cisco 887[...]

1-51 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-26 sho ws the back panel for the Cisco 887V A-V - W router . The Cisco 887V A-V (non-wireless) router does not ha ve th e antennas on the back panel. Figure 1 -26 Back P anel of the Cisco 887 V A -V Router Figure 1-27 s[...]

1-52 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco 880 Series with Embedded WLAN Antennas Some Cisco 880W , 880WD, and 880-WD ISRs hav e three embedded WLAN an tennas. These ISRs are fix ed-platform routers that: • Provide in tegrat ed VPN, embedded W i-Fi CER TIFIED™,[...]

1-53 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-29 sho ws the back panel details of t he C887V A-WD-A-K9 and C887V A-WD-E-K9 ISRs. Figure 1 -29 Back P a nel of the C887V A - WD-A -K9 and C887V A -WD-E-K9 ISRs C881WD Figure 1-30 sho ws the front panel details of the C[...]

1-54 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-31 shows the back panel detai ls of the C881WD -A-K9 and C881W D-E-K9 ISRs. Figure 1 -31 Back P anel of the C 881WD-A -K9 and C881WD-E-K9 ISRs C881G-B/S/V-K9 ISRs The C881G-B-K9, C881G-S-K9, and C8 81G-V -K9 ISRs are me[...]

1-55 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series C881G-U-K9 ISRs The C881G-U-K9 ISR is a member of the Cisco 880 seri es data routers. These routers provide inte grated V irtual Pri vate Network (VPN), embedded W i-Fi CER TIFIED™, 802.11b/g/n-compliant wireless Access Point [...]

1-56 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series For detailed ha rdware spec ifications, see th e Cisco 880 Series hardware data sheet at : http://www .cisco.com/en/US/prod /collateral/router s/ps380/data_sheet_c78_459542_ps380_Products_ Data_Sheet .html Cisco C881 Router Figu[...]

1-57 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-33 sho ws the back pane l of the Cisc o C881 Router . Figure 1 -33 Back P anel of the Cisco C881 Router For info rmation on installing t he Cisco C880 Series Rou ters, see : http://www .cisco.com/en/US/ docs/routers/acc[...]

1-58 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-35 sho ws the back pane l of the Cisc o C886V A Router . Figur e 1 -35 Back P anel of the Cisco C886V A Router For info rmation on installing Cisco C88 0 Series Routers, see: http://www .cisco.com/en/US/docs/ro uters/ac[...]

1-59 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-37 sho ws the back pane l of the Cisco C 886V AJ Router . Figur e 1 -37 Back P anel of the Cisco C886V AJ Rout er For info rmation on installing Cisco C88 0 Series Routers, see: http://www .cisco.com/en/US/ docs/routers[...]

1-60 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-39 sho ws the back pane l of the Cisc o C887V A Router . Figure 1 -39 Back P anel of the Ci sco C887V A Router For informatio n on installing Cisco C88 0 series routers, see the follo wing link: http://www .cisco.com/en[...]

1-61 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-41 sho ws the back pane l of the Cisc o C887V AM rou ter . Figure 1 -41 Back P anel of the Cisco C887V AM Router For info rmation on installing t he Cisco C880 Series Rou ters, see: http://www .cisco.com/en/US/ docs/rou[...]

1-62 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco C888 Integrated Services Router The Cisco C888 Integrated Services Router (ISR ) offers broadband speed s and simplified managem ent to small businesses, enterprise small branches, an d tele workers. The Cisco C888 ISR sup[...]

1-63 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-42 sh ow s the front panel of the Cisco C888 Router: Figure 1 -42 Fr on t P an el of the Cisco C888 Router For detailed descriptio n about the LED s on the Cisco 880 Serie s Routers, see information av ailable at: http:[...]

1-64 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-43 sho ws the back pane l of the Cisc o C888 Router . Figure 1 -43 Back P anel of the Cisco C88 8 Router For info rmation on installing Cisco 8 00 Series Routers, see the information a vailable at: http://www .cisco.com[...]

1-65 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Cisco C880 Series and Cisco C890 Series 4G LTE Integrated Services Routers Cisco C880 Series and Cisco C890 Series 4G L TE Integrated Services Routers (ISRs) e xtend 4G L TE support to the e xisting Cisco 880 Series and Cisc o 8[...]

1-66 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series WA N • C896V A G-L TE—VDSL or ADSL o ver ISDN, GE • C897V A G-L TE—VDSL or ADSL over PO TS, GE • C898EA G-L TE—G.SHDSL ove r PO TS, GE • C899G-L TE—GE, SFP Console or auxili ary port RJ-45 LAN switch 8-port 10/10[...]

1-67 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Ta b l e 1 - 3 1 lists the different 4G L TE SKUs av ailable for the Cisco 880 and Cisco 890 series ISRs.[...]

1-68 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series T able 1 -31 Support ed 4G L T E SKUs for th e Cisco 880 and Cisco 890 Ser ies ISRs SKU ID Mode Operating Region Frequency Band Desc ription C881G-4G-GA-K9 L TE: • HSP A+ • HSP A • UMTS • EDGE • GPRS Global (Europe, Ne[...]

1-69 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series C896V A G-L TE-GA- K9 L TE: • HSP A+ • HSP A • UMTS • EDGE • GPRS Global (Europe, Ne w Zealand, and Australia) 4G: • 800 MHz (band 20) • 900 MHz (band 8) • 1800 MHz (band 3 ) • 2100 MHz (band 1 ) • 2600 MHz ([...]

1-70 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series C897V AMG-L TE-G A-K9 • LT E • HSP A+ • HSP A • UMTS • EDGE • GPRS Global (Europe, Ne w Zealand, and Australia) L TE: • 800 MHz (band 20) • 900 MHz (band 8) • 1800 MHz (band 3 ) • 2100 MHz (band 1 ) • 2600 [...]

1-71 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series C898EA G-L TE-GA -K9 L TE: • HSP A+ • HSP A • UMTS • EDGE • GPRS Global (Europe, Ne w Zealand, and Australia) 4G: • 800 MHz (band 20) • 900 MHz (band 8) • 1800 MHz (band 3 ) • 2100 MHz (band 1 ) • 2600 MHz (b[...]

1-72 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco C881G-4G Integr ated Services Router Figure 1-44 sh ow s the front panel of the Cisco C881G-4 G ISR. Figur e 1 -44 Fr ont P anel of the Cisco C881G-4G ISR Ta b l e 1 - 3 2 describes the LEDs of the Cisco C881G-4G ISR. 3725[...]

1-73 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series 5 SIM Green / Y ellow (one green bl ink followed by two yello w blinks) SIM in slot 0 is active, SIM in slot 1 is not. Ye l l o w / G r e e n (one yellow blink follo wed by two green blinks) SIM in slot 1 acti ve, SIM in slot 0 [...]

1-74 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series 10 Service Green (solid) Service is activ e and the correspo nding LED is lit based on the service le vel that is acti ve (2G, 3G, 3.5G, 3.7G, LT E ) . Of f No service. 11 WW A N Gr een Modu le is powered on and conn ected but n[...]

1-75 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-45 sho ws t he back pane l of the Cisc o C881G-4G ISR. Figure 1 -45 Back P anel of the Cisco C881G-4 G ISR For info rmation on installing t he Cisco C880 Series Rou ters, see: http://www .cisco.com/c/en/us/t d/docs/rout[...]

1-76 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Ta b l e 1 - 3 3 describes the LEDs for Cisco C887V AG- 4G ISR. T able 1 -33 LED Description s fo r the Cisco C887V A G-4G ISR Number LED Color Description 1 Power OK Green On—DC p ower is bein g supplied to the rou ter and th[...]

1-77 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series 8 GPS Green (solid) Standalone GPS. Green (slow blinking) GPS is acquiring sign als. Y ellow (solid Assisted GPS. Ye l l o w ( s l o w blinking) Assisted GPS i s acquiring si gnals. Of f GPS is not configured. 9 RSSI Green (soli[...]

1-78 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-47 sho ws t he back pane l of the Cisc o C887V A G-4G ISR. Figur e 1 -47 Back P a nel of the Cisco C887V AG-4G ISR Cisco C896VAG-LTE Int egrated Services Router Figure 1-48 sh ow s the front panel of the Cisco C896V A G[...]

1-79 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Ta b l e 1 - 3 4 describes the LEDs for Cisco C896V A G-L TE ISR. T able 1 -34 LED Descr iptions f or Cisco C896V AG-L TE ISR Number LED Color Description 1 Power OK Green On—DC po wer is being supplied t o the router and the [...]

1-80 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series 9 SIM Green / Y ellow (one green blink follo wed by two yello w blinks) SIM in slot 0 is acti ve, SIM in slot 1 is not. Y ellow / Green (one yello w blink follo wed by two green blinks) SIM in slot 1 is acti ve, SIM in slot 0 is[...]

1-81 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-49 sho ws t he back pane l of the Cisco C 896V A G-L TE ISR. Figure 1 -49 Back P anel of the Cisco C896V AG-L TE ISR 12 GPS Green (solid) Standalone GPS. Green (slow blinking) GPS is acq uiring sig nals. Y ellow (solid)[...]

1-82 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series For info rmation on installing Cisco C89 0 Series Routers, see the follo wing link: http://www .cisco.com/c/en/us/td/ docs/routers/access/ 800/hardwar e/installati on/guide/800HIG.h tml Cisco C897VAG-LTE Integrated Service Route[...]

1-83 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Ta b l e 1 - 3 5 describes the LEDs for the Cisco C897V A G-L TE ISR. T able 1 -35 LED Descr iptions f o r the Cisco C897V AG-L TE ISR Number LED Color Description 1 Power OK Green On—DC po wer is being supplied t o the router[...]

1-84 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series 9 SIM Green / Y ellow (one green blink follo wed by two yello w blinks) SIM in slot 0 is acti ve, SIM in slot 1 is not. Y ellow / Green (one yello w blink follo wed by two green blinks) SIM in slot 1 is acti ve, SIM in slot 0 is[...]

1-85 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-51 sho ws t he back pane l of the Cisco C 897V A G-L TE ISR. Figure 1 -51 Back P anel of the Cisco C897V AG-L TE ISR 12 GPS Green (solid) Standalone GPS. Green (slow blinking) GPS is acq uiring sig nals. Y ellow (solid)[...]

1-86 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco C898EAG-LTE Int egrated Service Router Figure 1-52 sh ow s the front panel of the Cisco C898 EA G-L TE ISR. Figure 1 -52 Fr on t P an el of the Cisco C898EAG-L TE ISR Ta b l e 1 - 3 6 describes the LEDs for the Cisco C898E[...]

1-87 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series 4 G E LAN Ports G reen On—Ether net port is connected. Blinking—Dat a is either bei ng recei ved o r transmitted. Of f—Ethernet port is not connected. 5 G E W AN Ports Green On—Port is connected. Blinking—Dat a is eith[...]

1-88 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series 9 SIM Green / Y ellow (one green blink follo wed by two yello w blinks) SIM in slot 0 is acti ve, SIM in slot 1 is not. Y ellow / Green (one yello w blink follo wed by two green blinks) SIM in slot 1 is acti ve, SIM in slot 0 is[...]

1-89 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series 12 GPS Green (solid) Standalone GPS Green (slow blinking) GPS is acq uiring sig nals. Y ellow (solid) Assisted GPS. Y ellow (slo w blinking) Assisted GPS is acquiring signals. Of f GPS is not conf igured. 13 WW AN Green Module i[...]

1-90 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-53 sho ws t he back pane l of the Cisco C 898EA G-L TE ISR. Figure 1 -53 Back P anel of the Cisco C89 8EAG-L TE ISR Cisco C899G-LTE Int egrated Service Router Figure 1-54 sh ow s the front panel of the Cisco C899 G-L TE[...]

1-91 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Ta b l e 1 - 3 7 describes the LEDs for the Cisco C899G-L TE ISR. T able 1 -37 LED Descr iptions f o r the Cisco C899G-L TE ISR Number LED C olor Descript ion 1 Power OK Green On—DC power i s being supplied to the router and t[...]

1-92 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series 8 SIM Green / Y e llo w (one green blin k follo wed by two yello w blinks) SIM in slot 0 is acti ve, SIM in slot 1 is not. Y e llo w / Green (one yello w blink follo wed by two green blinks) SIM in slot 1 is acti ve, SIM in slot[...]

1-93 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-55 sho ws t he back pane l of the Cisco C 899G-L TE ISR. Figure 1 -55 Back P anel of the Cisco C899G-L TE ISR 12 WW AN Green Module is pow ere d on and connected, but no t transmitting or recei ving. Green (slo w blinki[...]

1-94 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series 1 GE W AN interfa ce 9 Power connector 2 GE W AN interfa ce 10 On/Of f switch 3 SFP port 11 Reset button 4 4G port 12 Earth ground connection 5 USB port 13 Kensingt on security slot 6 SIM slots 14 4G antenna connector—M1/DIV 7[...]

1-95 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Cisco 890 Series Integrated Service Routers This sections contains the fo llo wing topics: • Cisco 891, Cisco 892, and Cisco 892 F , page 1-95 • Cisco C897V AB-K9, page 1-105 Cisco 891, Cisco 892, and Cisco 892F The Cisco 89[...]

1-96 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-56 sh ows the fr ont panel details of the Cisco 890 Series router . Figur e 1 -56 Fr ont P anel of the Cisco 890 Series ISR Figure 1-57 sho ws t he back pane l details of th e Cisco 892W rou ter . Non w ireless routers [...]

1-97 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-58 sho ws the location of the SFP port on a Cisco 892FW router . Figur e 1 -58 SFP Po rt Location on a Cisco 892FW Rout er Cisco 892FSP, Cisco 896VA, Cisco 897VA, and Cisco 898EA The Cisco 8 92FSP , Cisco 896V A, Cisco8[...]

1-98 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Note The Cisco 892FSP does not support AIM2-CUE-K9 and AIM2-APPRE-104-K 9 because it does not hav e an SFC socket. Note T o upgrade DRAM memory from 512 MB to 1 GB on the Cisco 8 92FSP , Cisco 896V A, Cisco 897V A, and Cisco 898[...]

1-99 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-59 sho ws the back panel of the Cisco 892FSP Router . Figure 1 -59 Back P ane l of the Cisco 892FSP Router Figure 1-60 sho ws the front panel of the Cisco 892FSP Router . Figure 1 -60 Fr on t P an el of the Cisco 892FSP[...]

1-100 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-61 sho ws the back panel o f the Cisco 8 96V A Router . Figure 1 -61 Back P anel of the Cisco 896V A Router Figure 1-62 sh ow s the front panel of the Cisco 896V A and the Cisco 897 V A routers. Figure 1 -6 2 Fr on t P[...]

1-101 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-63 sho ws the back pane l of the Cisco 8 97V A Router . Figure 1 -63 Back P anel of the Cisco 897V A Router Figure 1-64 sho ws the back pane l of the Cisco 8 97V AM Router . Figure 1 -64 Back P anel of the Cisco 897V A[...]

1-102 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-65 sh ow s the front panel of the Cisco 897V AM router . Figure 1 -65 Fr on t P an el of the Cisco 897V AM Router Figure 1-66 sho ws the back panel o f the Cisco 8 97V A W router . Figure 1 -66 Back P a nel of the Cisc[...]

1-103 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-67 sh ow s the front panel of the Cisco 8 97V A W and the Cisco 897V AMW routers. Figur e 1 -67 Fr ont P anel of the Cisco 897V A W and the Cisco 897V AMW Routers Figure 1-68 sho ws the back pane l of the Cisco 8 97V A[...]

1-104 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-69 sho ws the back pane l of the Cisco 8 98EA router . Figure 1 -69 Back P ane l of the Cisco 898EA Router Caution The primary W AN port is design ed for an RJ-45 con nector only . Damage to the primar y W AN port may [...]

1-105 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Cisco C897VAB-K9 The Cisco 897V AB-K9 ISR is designed to supp ort 2-pair VDSL2 bondin g up to the 17a prof ile and single pair support for A DSL/VDSL over PO TS up t o the 30a profile. Ta b l e 1 - 3 8 provides information abou[...]

1-106 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Caution The primary W AN port is designed for an RJ -11 or RJ-14 co nnector only . Damage to the primary W AN port may occur if a non -RJ-11 or RJ-14 connector is inserted. Figure 1-72 sh ow s the front panel of the Cisco 897V [...]

1-107 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series 3 G E LAN 0 GE LAN 1 GE LAN 2 GE LAN 3 Green/Y ellow Off—No li nk. Green On—Link. Y ellow On—F ault with PoE. Implies no l ink. Green Blinking—Data is either being receiv ed or transmitted. 4 G E LAN 4 GE LAN 5 GE LAN 6[...]

1-108 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco C891 Series ISRs Cisco C891 Series ISRs are designed to deli ver secure broadband, metro Ethernet, wi reless LAN (WLAN) connecti vity , and business co ntinuity . Cisco C891 Series ISRs also pr ovide a 1 -port Gigabi t Et[...]

1-109 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figur e 1 -73 Fr ont P anel of the Cisco C891F Router For detailed descriptio n about the LED s on the Cisco C890 Series Routers, see the “LEDs” s ection on page 1-22 . 361136 Ci s co Ci s co 8 00 Serie s OK OK P OE OE PPP [...]

1-110 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Figure 1-74 sho ws the back panel o f the Cisco C 891F Router . Figure 1 -74 Back P anel of the Cisco C891F Router For info rmation on installing t he Cisco C890 Seri es Routers, see: http://www .cisco.com/en/US/docs/ro uters/a[...]

1-111 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-76 sho ws the back pane l of the Cisco C 891FW Route r . Figure 1 -76 Back P a nel of the Cisco C891FW Router For info rmation on installing t he Cisco C890 Series Rou ters, see: http://www .cisco.com/en/US/ docs/route[...]

1-112 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Cisco C891-24X/K9 Integrated Services Router Cisco C891-24X/K9 Inte grated Services Router (ISR) is a f ixed Cisco 890 Series ISR that suppo rts 24 port GE LAN. Cisco C89 1-24X/K9 ISR pro vides more swi tch port options compare[...]

1-113 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Figure 1-78 sho ws t he back pane l of the Cisc o C891-24X/K9 ISR. Figure 1 -78 Back P anel of the Cisco C891 -24X/K9 ISR For info rmation on installi ng the C891-24X/K9 ISR see t he follo wing link: http://www .cisco.com/c/en/[...]

1-114 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Kensington Lock A K ensington security slot i s located on the rout er back panel. T o secure the router to a desktop or other surface, use the K ensington lockdown equipment. Reset Button The Reset butto n is used to restore t[...]

1-115 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Step 2 Press and hold the Reset b utton until the system status LED b egins t o flash. T ypically , this occurs within 5 seconds. The router reloads itself after the startup conf ig uration has been replaced with the new custom[...]

1-116 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Step 2 Press and hold the Reset but ton until the syst em status LED be gins to flash. T ypically , this occurs within 5 seconds. The router reloads itself after the startup config uration has be en replaced w ith the new custo[...]

1-117 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series WLAN (2.4 GHz) Green On—Radio is connected, SSID 1 is conf igured, and cli ent is associated, but no data is being recei ved or being transmitt ed. Slo w blinking—Radio is con nected, SSID is conf igured, and beacons are b [...]

1-118 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series xDSL Data Green Blinking—The xDSL in terface is either recei ving or transmitt ing data. Of f—No data is being transmit ted or being recei ved. — 886, 886V A, 887, 887V A, 887V A-M 888 models 896V A, 897V A, 898EA, 897V A[...]

1-119 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Ta b l e 1 - 4 3 describes the LEDs for the Cisco 866V AE, Cisco 867V AE, Cisco 866V AE-K9, and Cisco 867V AE-K9 ISRs. BRI V oice B2 Green On—B RI B2 channel is connected. Blinking—BRI B2 ch annel is either recei ving or tr[...]

1-120 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series T able 1 -43 LED Descr iptions f or the Ci sco 866V AE, Cisco 867V AE, Cisco 866V AE-K9, a n d Cisco 867V AE-K9 ISRs LED Activity Description Power/Syst em Power/ System LED: Solid GE_MODE LED: Of f DSL_LINK LED: Off Power is o[...]

1-121 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Ta b l e 1 - 4 4 describes the LEDs for the Cisco 892FSP . T a ble 1 -44LED desciption for Cisco 892FSP ISR, 896V A, 897V A, and 898EA Routers Shared LEDs on the Cisco 881-V and Cisco 887VA-V Voice and Dat a Routers On the Cisc[...]

1-122 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Because the LED indicators are shar ed, the L ED illuminates (green) wh en either port is activ e. For example, t he LED indicator labeled BRI 1 B1 illuminat es when either the BRI1 B1 channel is acti ve or when the FXS port is[...]

1-123 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Note Flash memory is n ot upgradable. An e xternal USB fl ash memo ry module may be used if additional flash memory is needed. Main Memory Ta b l e 1 - 4 6 describes the main onboard memory storage for dif ferent router models.[...]

1-124 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Fan Some router model s do not ha ve a f an, while other models ha ve either one or tw o fans. The fans spin at full sp eed, as a diagnostic aid, i mmediately after the router is po wered up. After the router has booted , the f[...]

1-125 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series 3G Cellular Data WAN Connectivity The 3G (Evolution Data O nly [EVDO ], Univ ersal Mobile T el ecommuni cations Syst ems [UMTS]) cellular interface is intended for use as a backup data link, but it can also be used as a primary[...]

1-126 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Supported Cisco Radio Ante nnas The Cisco 891, Cisco 892, and Cisco 892F come wi th three remov able dipole antennas that can be replaced using the Cisco approved antenna e xtenders listed in Ta b l e 1 - 4 9 . Note Cisco suppo[...]

1-127 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series Small Form-Factor Pluggable Port The SFP port supports auto-media-detection, auto-failo ver , and remote fault indication (RFI), as described in the IEEE 802.3ah specification. See the Cisco 892F data sheet for a list of suppor[...]

1-128 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series Embedded wireless AP Provides W i-Fi CER TIFIED™ 802.11a/b/g/n compliance. The Cisco 860 series rout ers contain a single 802.11b/g /n radio. Some Cisco 880 series rou ters contain a single 802.11b/g /n radio while others con[...]

1-129 Cisco Integrated Services Router Hardware Installation Guide Chapter 1 Product Overvie w Cisco 860, 880, 89 0 Series USB port, Supports USB 1.1. Provides co nnection for USB de vices such as security tokens and flash memory . The Cisco 880 series routers ha ve a si ngle USB port; the Cisco 890 series routers ha ve tw o USB ports. Cisco 880 se[...]

1-130 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 1 Produ ct Overview Cisco 860, 880, 890 Series BRI voice port The ISDN BRI S/T voic e interf ace provides a client-side (TE) ISDN S/T physi cal interface for con nection to an NT1 de vice that terminates an ISDN teleph one network . — 887V — SFP 21 port Supports auto-me[...]

CH A P T E R 2-1 Cisco Integrated Services Router Hardware Installation Guide 2 Installing the Router This chapter describes the equipment and the pr ocedures for successfully installing the Ci sco 860, 880, 890 ISRs, Cisco 819 ISRs, and t he Cisco 812 ISRs, and cont ains the follo wing section s: • Installing the Cisco 81 0 ISR, page 2-1 • Ins[...]

2-2 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Items Shipped w ith your Router Unpack the bo x and verify that a ll items liste d on the i n voice wer e shipped wi th the Cis co 812 ISR. The follo wing items are ship ped with your router: • A C power adapter • Acce[...]

2-3 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-1 1 0-2 4 Scre ws Step 2 Install the PoE+ splitter into the mounting plate wit h four 6-32 scre ws. (See Figure 2-2 .) 2 8 5667 1 1 3 2 1 10-24 scre ws 2 Box hanger 3 Shelf bracket (PID 700-39491-01)[...]

2-4 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figur e 2-2 6-32 Scr ews Step 3 Connect the supplied plenum rated Cat5 cable t o the GE0 port on the PoE+ splitt er . Step 4 Connec t the Cat5 cable from your PoE+ source to the PoE+ in port on the PoE+ splitter . Step 5 P[...]

2-5 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Step 6 Install the power cord with p ower cord lock to the p ower jack of the PoE+ splitter while making sure that the two a rms of the power cord loc k slide into the correspo nding slo ts on the PoE + splitter and are full[...]

2-6 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figur e 2-5 T -Rail Installing the SIM Card This section describes how to install and replace the SIM card. Ensure that the router is not mounted to a wall, rack, or DIN rail . Caution Do not touch an y part of the e xpose[...]

2-7 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-6 Accessing the SIM Car d Step 4 Re mov e the SIM card and install the new cards. Step 5 Re install the same 6-32 flat head screws using a sc rew dri ver to secure the access panel back in place. Figure 2-7 sho ws [...]

2-8 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figure 2-7 SIM Access P anel Installing the 3G Antenna Note Install the antenna before you mo unt the Cisco 812 ISR. War ni n g Do not locate the antenna near overhead power lines or other electric light or power circuits,[...]

2-9 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-8 Installi ng the 3G Antenna Step 2 Orient the antenna pe rpendicular with respect to the floor . Figure 2-9 sho w s the 3G antenna installed. Figur e 2-9 3G A ntenna Installed Mounting the Cisco 812 ISR This sectio[...]

2-10 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR • Mounting Bracket , page 2-10 • Ceiling Grip Clips, p age 2-11 • Mounting the Cisco 812 ISR Belo w a Suspended Ceiling, page 2-13 • Mounting the Cisco 812 ISR on a Hard Ceiling or a W all, page 2-15 • Mounting [...]

2-11 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-1 0 Universal Brac k et In stalled on the Cisco 812 ISR Ceiling Grip Clips Use a ceiling grid clip to mo unt th e router on a suspended ceiling. Th e ceiling grid clip that you need depends on the ceiling til es on[...]

2-12 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figure 2-11 sh ow s a ceiling grid clip. Figur e 2-1 1 Ceiling Gr id Clip Additional Adapters for Ch annel and Beam Ceiling Rails The most common type of suspen ded ceiling support rail (the support for the ceili ng tiles[...]

2-13 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-12 T -Rail, Channel, an d Beam Ceiling Rail T ypes Figur e 2-13 Adapter Cl ips Installed with Ceiling Gr id Clips Mounting the Cisco 812 ISR Below a Suspended Ceiling The recommended po wer option for the Cisco 812[...]

2-14 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Step 7 Hold the mounting bracket and insert a 6-32 x 0.18-inch scr e w into each of the four corresponding holes (A, B, or C) and tighten. Step 8 If nec essary , drill or cut a cable access hole in the ceiling tile large [...]

2-15 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figure 2-14 Suspended Cei ling Mounting Details Mounting the Cisco 812 ISR on a Hard Ceiling or a Wall This procedure describes th e steps required to mount the Cisco 812 ISR on a cei ling constructed of 3/4-inch (19.05 mm)[...]

2-16 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Note W all mounting is only support ed with the I/O (antenna) side f acing up. Step 1 Use the mounting bracket as a template to mark the locat ions of the mounting holes on the bracket. Figure 2-15 sh ow s details of the [...]

2-17 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Step 3 ( Optional) Drill or cu t a cable acc ess hole near a nd below the locatio n of the moun ting brac ket cable access cov er lar ge enough for the Et hernet cable, buildi ng ground wire, and po wer cables. Step 4 Pull [...]

2-18 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Step 4 Route the ca bles through the bracket before you attach the b racket to the ceil ing. Step 5 Route the cables through the main cable access hole an d then through the smalle r acces s hole as shown in Figure 2-16 .[...]

2-19 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-1 7 Connecting the Ri ng Lug ont o the Grounding P oint Step 7 Connect the ring lug to the router grounding poin t and reinstall the same 6-32 scre w . Installing the Cisco 819 ISR This section describes the equ i[...]

2-20 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR War ni n g This equipment must be grounded. Never de feat the ground conductor or operate the equipme nt in the absence of a suita bly installed ground conductor . Contact the appropri ate electrical inspection authority [...]

2-21 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Items Shipped with your Router Unpack the bo x and verify that a ll items liste d on the i n voice wer e shipped wi th the Cis co 819 ISR. The follo wing items are ship ped with your router: • A C power supply (default) ?[...]

2-22 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR If you plan to conf igure the software using Ci sco IOS commands through the consol e port, prov ide an ASCII terminal or a PC that is run ning terminal emulation softw are to conn ect to the console port. If you plan to [...]

2-23 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR War ni n g Do not cover or obstru ct the router vents located on both sides of the rout er; otherwise, overheating could occur and cause d amage to the router . War ni n g Do not place anything on top of the route r that we[...]

2-24 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Installing Antennas Note Before you install the Cisco 819 ISR on a table, w all, or DIN rail , install the antennas on the front panel. It is dif f icult to install th e antennas after the router is installed. T o attach [...]

2-25 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-20 Cisco WiFi Antenna Assembly Installing on a Table T o install the router on a table or other flat hor izontal surface, f irmly place the router on a table or other horizontal surface. K eep at le ast 1 inch (2.[...]

2-26 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR T o mount the router on a wall, follow these steps: Step 1 Re mov e the screws on the sides of the routers. Step 2 Attach the s tandard brackets to the chassis using the three screws provided for each bracket. (See Figure[...]

2-27 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-22 Installing the Router t o the W all Note For holl ow-w all mounting, each brack et requires tw o wall anchors with washers. W all anchors and washers must be size number 10. Step 4 Route the cables so that they[...]

2-28 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR T o attach the Cisco 819 ISR to a 35-mm wi de DIN rail, follo w these steps. Step 1 Attach the D IN rail to the back of the ro uter using the three screws provided. (See Figure 2-23 .) Figure 2-23 Attac hing the DIN Rail [...]

2-29 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Figur e 2-25 Cisco 819 ISR Installed with the DIN Rai l 282626[...]

2-30 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Installing the Router Using the Co nfigurable Low Profile DIN Mount If space is limited between the DIN rail and th e enclosure co ver , the Conf igurable Low Prof ile DIN Mount can be utilized to moun t the router flat a[...]

2-31 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Configuring the Mount Figur e 2-27 Low Pr ofile DIN Mount Configuration The mount comes conf igured in a bottom cable ex it pos ition, with the rail latches in the slots marked Bottom . T o reconfigure the mount: 1. Remov e[...]

2-32 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Attaching the mount to the router Figure 2-28 Cisco ISR 81 9 mo unted in a Configurable Low Pr ofile DIN moun t T o attach the router to the mount: 1. Remov e the bottom screw o f the 3 scre ws on the sides of the router [...]

2-33 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Installing the Router Ground Connectio n The router must be conn ected to a reliable earth ground . Install the ground wire in accordance with local electrical safety standards. • For NEC-compliant grounding, use size 14 [...]

2-34 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR After you install and properly ground the router , yo u can connect the po wer wiring, the LAN cables, and the cables for administrati ve access as required for your inst allation. Installing the Power Cord Retention Lock[...]

2-35 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Step 3 Install the power cord with po wer cord lock and the pre-installed o-ring to mate with the po wer jack on the router while making sure th at the two arms of the po wer cord lock slide into the corresponding slots on [...]

2-36 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 810 ISR Figure 2-34 Installing P o wer S w itch Loc k Figur e 2-35 Po wer Switc h Lock Installed 344033 1 2 3 4 5 1 Ring terminal 4 Power switch lock 2 Pow er switch lock washer 5 Pan- hea d s cr ew 3 Power swit ch lock standof f[...]

2-37 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 810 ISR Mounting the DC Power Supply War ni n g Read the wall-mounting in structions carefully before beginnin g installation. Failure to use the correct hardware or to follow the correct p rocedures could result in a hazardous sit[...]

2-38 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Note The DC supply is IP 41 compliant in all six orthogonal d irections. The mounting or ientation will not affect IP 41 compliance. Installing the Cisco 860, 880, 890 ISR This section descri bes the equipm ent [...]

2-39 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Equipment, Tools, and Connections This section descri bes the equipment, tools, and conn ections necessary for instal ling your Cisco 860 series, 880 series, and 890 series ISRs. It contains the fo llo wing topics[...]

2-40 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR – T wo number -10 wall an chors with washers, for m ounting the router on a hol low -wall. • W ire crimper for chassis grounding. • W ire for connecting the chassis to an earth ground: – AW G 1 4 ( 2 m m[...]

2-41 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR War ni n g This equipment must be grounde d. Never defeat the ground conductor or operate the eq uipment in the absence of a suita bly installed ground conductor . Contact the appropriate e lectrical inspection au[...]

2-42 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR The mounting holes are bidi rectional. Y ou can hang the rout er with the front bezel f acing upward or downw ard. K eep at least 1 inch (2.5 cm) of clear sp ace beside the cooling in let a nd exhaust v ents. Ti[...]

2-43 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Step 3 Hang the router on the scre w without forcibly pushing to wards the w all side. The scre w head may damage the protection wa ll inside. Place the po we r adapter on a nearby hori zontal su rface. Se e Figur[...]

2-44 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Installing the Router Ground Connection The router must be connected to a reliable earth gro und. Install the ground wire in accordance wi th local electrical safety standards. • For NEC-comp liant groundin g,[...]

2-45 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Step 1 Remove the f our mounting scre ws of the top cov er . 284921[...]

2-46 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Step 2 Install the left-side FIPS cover , as sho wn in detail A. Step 3 Rotate and bring into the close position to hin ge to the correct he xagon. Step 4 Pla ce the adapter plate before clos ing by aligning the[...]

2-47 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Step 5 Secure the FIPS cover with two mounting scre ws. Step 6 Install the right-side FIPS cover th e same way as the left-side FIPS co ver . Step 7 V iew after both covers are installed. 284923 284924[...]

2-48 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Step 8 If the FIPS covers ar e installed with the rack mou nt brackets, the adapter plates are not req uired in the installati on. Installing Antennas for Cisco 890 Series The Cisco 890 series wireless routers h[...]

2-49 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR T o attach the radio antennas to yo ur wireless router , follow these steps: Step 1 Manually screw the antennas ti ght to the RP-TNC connectors on the back of the router . Figure 2-40 Attac h ing An ten n a s to t[...]

2-50 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Figure 2-41 Antennas Or iented V ertically Up 274774[...]

2-51 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Figure 2-42 Ante nnas Or iented V ertically Down 274775[...]

2-52 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Installing Cisco 890 Series in a Rack The Cisco 890 series ISRs can be mounted in a rack. T o install a Cisco 890 series ISR in a rack, follow these steps: Step 1 Remove the scre ws, as shown in Figur e 2-43 . F[...]

2-53 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Figure 2-44 Attac hing the Rack-mount Br ac k ets to the Cisco 890 Ser ies ISR Caution Chassis installation mu st allo w unrestricted airflo w for chassis cooling. Step 3 Us ing two screws for each side (s upplied[...]

2-54 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR Step 5 Connec t the chassis to a reliable earth ground. Fo r the chassis ground connection proc edures, see the “Installing Cisco 890 Series i n a Rack” section on page 2-52 . Installing the C881G-B/S/V-K9 I[...]

2-55 Cisco Integrated Services Router Hardware Installation Guide Chapter 2 Installing the Router Installing the Cisco 860, 880, 890 ISR Figure 45 SIM Card Installation 282 3 16 1 2 3 A B 4 A B[...]

2-56 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 2 In stalling the Router Installing the Cisco 860, 880, 890 ISR T o install the SIM cards, follow these steps: Step 1 Open the door coveri ng the SIM card slots. a. Insert the tip of the scre w driv er into the upper latch and gent ly disengage it as sho wn in the figure. b.[...]

CH A P T E R 3-1 Cisco Integrated Services Router Hardware Installation Guide 3 Connecting the Router This chapter describes how to install the Cisc o 860, 880, 890 ISRs and the Cisco 819 ISR. • Cisco 810 Series, page 3-1 • Cisco 860, 880, 890 Series, p age 3-8 Cisco 810 Series Cisco 819 Series This section descri bes ho w to connect Cisco 819 [...]

3-2 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 810 Series Preventing D amage to the Route r T o prev ent damage to your router , follow these gu idelines when connecting de v ices to your router: • T urn off po wer to the device s and to the router until a ll connections are completed. Cau[...]

3-3 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 810 Seri es Step 3 (Optional) Connect additional serv ers, PCs, or workst ations to the other Ethern et switch ports. Note Use the Cisco Conf iguration Express to conf igure the Intern et connection sett ings. See Cisco Conf igurati on Pr ofession[...]

3-4 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 810 Series Connecting a Terminal or PC to the Console Port Connect a terminal or PC to the Console port either to configure the software by using t he CLI or to troubleshoot problems with t he router . T o connect a terminal or PC to the co nsol[...]

3-5 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 810 Seri es Connecting a Modem to the Console Port T o connect a modem to the router , follo w these steps: Step 1 Connec t the RJ-45 end of the adapter cable to the Console port on the router as sho wn in Figure 3-4 . Figure 3-4 Connecting a Mode[...]

3-6 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 810 Series T o connect your Cisco 819 ISR to an A C power outlet, follo w these steps : Step 1 Connect the A C adapter to an A C power outlet. Step 2 Plug the adapter cord into the router . Connecting the DC Adapter War ni n g This product relie[...]

3-7 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 810 Seri es Figure 3-6 DC P ower Supply PWR2-20W -12V DC and PWR2-20W -24VDC Step 2 Plug the adapter cord into the router . Note The power ad apters hav e 18 A WG wires for the input connection. T inned bare wires are used for the input connection[...]

3-8 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Cisco 860, 880, 890 Series This section describes how to connec t Cisco 86 0 seri es, Cisco 880 series, and Cisco 890 series ISRs to Ethernet devices, Power ov er Ethernet (PoE), and a n etwork. Note Depending on the feature[...]

3-9 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Note The illustration s in this chapter sho w a wireless router with antennas at tached. Non-wireless routers do not ha ve antennas or ante nna connectors on the ba ck panel. Ho wev er , the procedures for connecting devices [...]

3-10 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series War ni n g Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations. Statement 1036 War ni n g Never touch uninsulated telephone wires or terminals unless the telephone line [...]

3-11 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Preventing Damage to the Router T o prev ent damage to your router , follow these gu idelines when connecting de vi ces to your router: • T urn off power to the devices and to the router until all connections are completed[...]

3-12 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Connecting a PC, Server, or Workstation T o connect a PC (or other Et hernet de vices) to an Ethernet switch po rt, follow these steps: Step 1 Connect one end of the yellow Et hernet cable to an Ethernet switch port on the [...]

3-13 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Connecting a Phone T o connect an 802.3af-compliant ph one to an Ethernet switch port, foll ow these steps: Note A po wer source must be pro vided for the phone to function. This can be done in two ways: the phone can be po [...]

3-14 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Step 2 Connect the other end of the cable to the RJ-45 port on t he phone. Connecting an External Ethernet Switch If more than four PCs in an of fice must be connecte d to each oth er , you can ad d Ethernet connections to [...]

3-15 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Connecting the V.92 modem Port War ni n g Hazardous network voltages are present in W AN ports regardless of whether power to the unit is OFF or ON. T o avoid electric shock, use caution when working near W AN ports. When de[...]

3-16 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Connecting a Terminal or PC to the Console Port Connect a terminal or PC to the Console Auxiliary (A ux) port either t o conf igure the software by usin g the CLI or to troublesh oot problems with the router . T o connect a[...]

3-17 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series When the termi nal emulator es tablishes communicati ons, the router pro mpt is displa yed. For more in formation on terminal em ulation settin gs, see Applying Corr ect T erminal Emulator Settings for Console Connections. C[...]

3-18 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Connecting the 3G Card Note For informatio n on embedded multiband, mul tiservice W AN modems, see Configuring Cisco EHWIC and 880G for 3 G (EV -DO Rev A) and Conf iguring Cisco EHWIC and 880G for 3.7G ( HSP A+)/3.5G (HSP A[...]

3-19 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figure 3-13 Insert ing the 3G Car d Step 2 Open the top of the anti- theft locking bracket, as sho wn in Figure 3-14 . Figure 3-14 Open ing the Anti-t heft Loc king Brac k et 1 3G card with the Ci sco logo faci ng up 4 Screw[...]

3-20 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Step 3 Slide the opened locking bracket under the 3G card. The locki ng bracket should align with the notches on either side of the 3G card, as sho wn in Figure 3-15 , and the pins on the locking brac ket should be inserted[...]

3-21 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 4 Close the locking bracket, as sho wn in Figure 3-16 . Figur e 3-16 Closing the Locking Br ack et Step 5 Insert the scre ws, as sho wn in Figure 3 -17 , and tighten with a n umber 2 Phillips scre wdriv er . Figure 3-17[...]

3-22 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Note The antenna c onnector receptac le may be locat ed on the left, rig ht, or front of the 3G card, depend ing on your card. Figure 3-18 an d Figure 3-19 show the antenna connected to the 3G card with an SSMB type plug, a[...]

3-23 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-19 Antenna with the SMK-TS- 9 Connect or If you are u sing an e xtension c able, you must at tach the 3G a dapter for e xtended cable antenna t o the body of the rout er . Depend ing on the SK U ordered, the adapte[...]

3-24 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Step 8 Remove the protecti ve tape from the adh esi ve on the b ottom of the antenna cradle, t hen firmly press the cradle to the flat surface. Installing the 3G Adapter for Extended Cable/Antenna For better signal and rece[...]

3-25 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 2 Locate the hooks on the adapter as shown in Figure 3-21 . Figur e 3-21 Locating the Hooks on the A dapt er Step 3 Align and insert the h ooks of the adapter into the air v ent holes on the left side router body as sho[...]

3-26 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Step 4 Align the circular adapter hole with the hole on the router chassi s from where you remo ved the scre w in Step 1 and use the scre w to attach the adapter to the router as sho wn in Figure 3-23 . Figure 3-23 Attac h [...]

3-27 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 5 Connect the extension cable to the 3G card, as descr ibed in the “Connecting th e 3G Card” section on page 3-18 . The complete assembly is shown in Figur e 3-24 . Figure 3-24 Adapt er Connected to 3G Car d and Rou[...]

3-28 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Note Antenna orientation can increase or decrease signal reception due to polar ization. T ypically , an SP’ s transmitting antenn a on the BTS is a v ertically p o larized omnidirection al antenna, which means the electr[...]

3-29 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series T o connect the Data BRI port to the ISDN service pr ovider , follo w these steps: Note Although the follo wing procedure sho ws a Cisco 888W data r outer , this procedure applies to all Cisco 880 series router with a Data B[...]

3-30 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Step 4 Connec t the second unshielded Category 5 cable fr om the telecommunication servi ce port on the splitter to the wal l jack to allo w a link to the netw ork service pro vider . Connecting an FE Line to an FE WAN Port[...]

3-31 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Connecting a GE Line to an GE WAN Port T o connect the Gigabit Ethernet (GE) W AN port on the router , follow these step s: Step 1 Connect one end of the yellow cabl e to the GE W AN port as sho wn in Figure 3-27 . Figur e 3[...]

3-32 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Caution Cisco Systems D SL W AN Interfac es are test ed for complian ce with re gulatory stan dards such as FCC Part 6 8, ITU-T K.21, IEC 61000-4- 5, and CSA/EN/IEC/UL 60950-1. These standards assum e Primary Protection de [...]

3-33 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-28 Primary Pr otection Device Location T o connect the router to a global industry stan dard symmetrical high-speed DSL (G.SHDSL) line, very- high-speed digital subscriber l ine 2 (VDSL2) port, or an ADSL2+ li ne, [...]

3-34 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Caution The primary W AN p ort is design ed for an RJ-45 conne ctor only . Damage to the prima ry W AN port ma y occur if a non-RJ-45 co nnector is inserted. Note The DSL line must be pro visioned by your service pro vider [...]

3-35 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-30 Connecting P oE for the Cisco 880 and the Cisco 890 Ser ies Router s The Cisco 880 series ISRs with embedded WLAN an tennas r equire a single ex ternal po wer supply: a 30-W power supply for non-POE-enabled ro u[...]

3-36 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series T o connect your Cisco 860 series, Cisco 880 series, o r the Cisco 890F SP ISR to an A C power outlet, follo w these steps: Step 1 Connect the router to an A C po wer outlet as shown in Figure 3-31 . T o connect the A C po [...]

3-37 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figur e 3-32 Connecting the AC A dapter f o r the Cisco 892FSP Figure 3-33 Cisco 892FSP , 896V A, 897V A, and 898EA P ower A dapter Connect or Pin Assignment 7 6 GE LA N 5 4 9 GE WA N 8 GE WA N SFP 8 12VD C 2. 5A CONSOL E AU[...]

3-38 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series Step 2 T o secure the power cord to the router , attach the powe r lock clip to the po wer cord, slide the clip to the end of the DC plug, and secu re the retaining clip i nto the rout er chassis. See Figure 3-34 . Figur e [...]

3-39 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Step 3 Snap the latches into the holes on eith er side of the po wer connector . See Figure 3-35 . Figur e 3-35 P ow er Loc k Clip Latc hed Into the Hole s on Either Side of th e P ower Connect or Connecting an FXS Line Use [...]

3-40 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series T o conne ct the FXS lin e, follow these steps: Step 1 Connect one end of the straight-through RJ-11 cable to th e FXS port. Figure 3-36 sho ws an FXS line connection. Figur e 3-36 Conne cting an FXS Line Step 2 Connect the[...]

3-41 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series War ni n g Hazardous network voltages are present in W AN ports regardless of whether power to the unit is OFF or ON. T o avoid electric shock, use caution when working near W AN ports. When detaching cables, detach the end [...]

3-42 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series This option allo ws a stepped offhoo k resistance duri ng seizure, which a voids o verloading the circu it during of fhook in the e vent that ringing v oltage is present on the circuit at the same time as the trunk seizure.[...]

3-43 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Figure 3-38 sh o ws a v oice BRI line connec tion. Figur e 3-38 Conne cting a V oice BRI Line Step 2 Connect the other end of the cable to the RJ-45 telephon e outlet or other de vice. War ni n g Invisible laser radiation ma[...]

3-44 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series War ni n g Ultimate disposal of this product should be han dled according to al l national laws and regulations. Statement 1040 War ni n g Invisible laser radiation may be emitted from the end of the unterminated fiber cabl[...]

3-45 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series Verifying Connections T o verify that all de vices are prop erly connected to the router , first turn o n all the connected de vices, then check the LEDs. T o verify router operation, refer to Ta b l e 3 - 1 . For the full L[...]

3-46 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series T o wireless LAN WLAN LINK W ireless LAN link status: • Green if at least one client is associated. • Off if no client is associated. WLAN 2.4 GHz W ireless LAN 2.4-GHz status: • Green when radio is connected, SSID 13[...]

3-47 Cisco Integrated Services Router Hardware Installation Guide Chapter 3 Connecting the Router Cisco 860, 880, 89 0 Series To W A N G E l i n e (860V AE models only) GE Mode On when GE W AN mode is selected. Off when the de vice is po wered off or when D SL W AN mode is selected. GE A CT On when the GE W AN interface i s up. Blinking when there [...]

3-48 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 3 Co nnecting the Router Cisco 860, 880, 890 Series[...]

CH A P T E R 4-1 Cisco Integrated Services Router Hardware Installation Guide 4 Initial Configuration This chapter pro vides instructions for initial conf iguration of the Cisco 819, 860, 880, 890 Series Integrated Services Routers (ISRs), and contains the follo wing sections: • Cisco 810 Series, page 4-1 • Cisco 860, 880, 890 Series, p age 4-2[...]

4-2 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 4 Initial Configuration Cisco 860, 880, 890 Series Verifying the Initial Configuration For more information, r efer to the “V erifying the Initial Conf iguration” section on page 4-6 . Cisco 860, 880, 890 Series This section pro vides instructions for in itial conf igurat[...]

4-3 Cisco Integrated Services Router Hardware Installation Guide Chapter 4 Initial Configuration Cisco 860, 880, 89 0 Series Please change these publicly known initial c redentials using Cisco CP Express or the Cisco IOS CLI. Here are the Cisco IOS commands. username <myuser> privilege 15 secret 0 <mypassword> no username username1 Repl[...]

4-4 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 4 Initial Configuration Cisco 860, 880, 890 Series Setup Command Facility The setup command facility guides you through the conf iguration process by prompting you fo r the specific information that is need ed to conf igure your system. Use the setup co mmand facili ty to con[...]

4-5 Cisco Integrated Services Router Hardware Installation Guide Chapter 4 Initial Configuration Cisco 860, 880, 89 0 Series Step 5 Enter a hostname for the router (this example uses Router). Configuring global parameters: Enter host name [Router]: Router Step 6 Ente r an enable secret password. This password is encrypted (more secure) and cannot b[...]

4-6 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 4 Initial Configuration Cisco 860, 880, 890 Series The confi guration is displayed: The following configuration command script was created: hostname Router enable secret 5 $1$D5P6$PYx41/lQIASK.HcSbfO5q1 enable password xxxxxx line vty 0 4 password xxxxxx snmp-server community[...]

4-7 Cisco Integrated Services Router Hardware Installation Guide Chapter 4 Initial Configuration Cisco 860, 880, 89 0 Series Initial Configuration of the Wireless Access Point The embedded wireless access point (AP) runs its o wn IOS. Y ou can initially conf igure the embedded wireless AP by using one of the follo wing methods: • Cisco Conf igura[...]

4-8 Cisco Integrated Servic es Router Hardware Installation Guide Chapter 4 Initial Configuration Cisco 860, 880, 890 Series[...]

A-1 Cisco Integrated Services Router Hardware Installa tion Guide APPENDIX A Technical Specifications This appendix pro vides specif ications for the Cisco 860, 880 , 890 Series ISRs, Cisco 819 ISRs, and the Cisco 812 ISRs: • Cisco 810 Series, page A-1 • Cisco 860, 880, 890 Series, p age A-11 Cisco 810 Series This section contains the following[...]

A-2 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 810 Series T able A-1 Cisco 812 ISR Specifications Description C812G+7-K9 (3G only) C812G-CIFI+7-E-K9 C812G-CIFI+7-N-K9 C812G-CIFI-V-A-K9 C812G-CIFI-S-A-K9 (3G + WiFi) Physical Characteristics Dimensions (H x W x D) 2.01 x 8.95 x 9.49 inches[...]

A-3 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 810 Seri es Radio Immunity EN301 489-1, EN 301 48 9-7, and EN301 489 -24 T ransportation/Storage Conditions T emperature –40 to158 °F (–40 to 70°C) Humidity 5–95% Altitude 4570 m (15,000 ft ) AC Power Adapter Pow er Source 100?[...]

A-4 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 810 Series Mean Time Between Failur e Ground Benign Environment Ta b l e A - 2 lists the Mean Time Between Failure (MTBF) v alue s for Cisco 812 ISRs. The MTBF is calculated based on the Ground Benign condition. Th e v alues may be adjusted [...]

A-5 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 810 Seri es T able A -3 Cisco 81 9 ISR Specifications Description Hardened Design Specification (Cisco 819HG and Cisco 819HG-4G ISRs) Non-Hardened Design Specifications (Cisco 819G and Cisco 819G-4G ISRs) Hardened Design Specification s[...]

A-6 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 810 Series Standard Safety Certif ications UL 60950-1, 2nd edit ion; CAN/CSA C22.2 No. 609 50-1, 2nd edition, EN 60950- 1, 2nd edition; CB to IEC 60950-1, 2nd edit ion with all group d if ferences and national de viations UL 60950-1, 2nd edi[...]

A-7 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 810 Seri es Altitude Operating: –50 0 to 10,000 ft, de-rat ing operating temperature 1°C per 1,000 f eet Non-operating: –1,000 to 30,000 ft Cable Lengt h Input cabl e: 1 m Output cable: 1.3 m Inrush Current 50 A @ 25°C T emperatur[...]

A-8 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 810 Series Mean Time Between Failur e Ground Benign Environment Ta b l e A - 4 lists the Mean Time Between Failure (MTBF) v alue s for Cisco 819 ISRs. The MTBF is calculated based on the Ground Benign condition. Th e v alues may be adjusted [...]

A-9 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 810 Seri es Supported Power Adapters Ta b l e A - 5 and Ta b l e A - 6 list the supported po wer adapters for Ci sco 819 ISRs. The PWR1 A C and DC adapters uses molex connector while PWR2 uses ba rrel-type connector . C819HGW -S-A-K9 C8[...]

A-10 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 810 Series Martek MBRH 0500-D/2 Q21 24 VDC Y es Y es Martek MBRH 0500-D/2 Q21 52 VDC Y es Y es Martek MBRH 0500-D/2 Q21 72 VDC Y es Y es Martek MBRH 0500-D/2 Q21 110 VDC Y es Y es Martek MBRH 0500- B/Q22 24 VDC Y es — Martek MBRH 0500- C/[...]

A-11 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 860, 880, 890 Series This section pro vides router , port, an d cabling speci f ications for the Cisco 860 series, Cisco 880 series, and Cisco 890 seri es ISRs. It cont ains the follo wing topics: • Router[...]

A-12 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series • G.SHDSL Port Connec tor Pinouts, page A-25 • Data BRI Port Connecto r Pinouts, page A-26 • V oice ISDN BRI Interface Pi n Nu mbers and Functions, page A-27 • SFP Port Connector Pinouts, page A-27 • Cable Spe[...]

A-13 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series T able A-7 Rout er Specifications Description Design Specification (all models except Cisco 860V A E series) Physical Dimensions Dimensions w ith antenn a and rubber feet (H x W x D) 1.9 x 12.8 x 10.4 in. W eight [...]

A-14 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series Cisco 860VAE Series Ta b l e A - 8 lists the system specifications fo r the Cisco 860V AE series routers. T able A-8 Rout er Specifications Description Design Specification Cisco 860V A E series Physical Dimensions Dime[...]

A-15 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 860VAE-W-A-K9, Cisco 860VAE-W-E -K9, and Cisco 860VAE-POE-W-A-K9 Series Ta b l e A - 9 lists the system specificati ons for the Cisco 860V AE-W -A-K9, Cisco 860V AE-W -E-K9, and Cisco 860V AE-POE-W -A-K9 ser[...]

A-16 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series Cisco 870 Series Ta b l e A - 1 2 lists the system specifications for the Cisco 870 seri es routers. Radio technology IEEE 802.11n draft 2.0 standard compliant. Backward compatibl e with 802.11b/g. Operating Frequenc y [...]

A-17 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 880 Series Ta b l e A - 1 2 lists the system specifications for the Cisco 8 80 series routers. Nonoperating altitude 0 to 15,000 ft (0 to 4 570m) Operating temperature 32 to 104°F (0 to 40°C) Operating hum[...]

A-18 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series T able A -1 1 Router Specification s Description Design Specification Physical Dimensions Nonwireless models (H x W x D): • 1.9 x 12.8 x 9.8 in. ( 48 x 325 x 249 mm) (includes rubb er feet) • 1.75 x 12.8 x 9.8 in . [...]

A-19 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 880G Series 3G Wirele ss Integrated Services Router Ta b l e A - 1 2 lists the system specifications for th e Cisco 880G series 3G W ireless Integrated Services routers. Cisco 880VA Series Ta b l e A - 1 2 l[...]

A-20 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series T able A -13 Router Specif ications Description Design Specification Physical Dimensions Nonwireless models: • H x W x D = 1.9 x 12 .8 x 9.8 in. (48 x 325 x 249 mm) (includes rub ber feet) • H x W x D = 1.75 x 12.8 [...]

A-21 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Cisco 890 Series Ta b l e A - 1 2 lists the system specifications for the Cisco 8 90 series routers. T able A -14 Router Specif ications Description D esign Specification Physical Dimensions Cisco 891, 892, and 89[...]

A-22 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series Power Supply Ta b l e A - 1 5 lists the maximum input v alues for the po wer su pply used with the Ci sco 860, 880, 890 series ISRs. Wireless Access Point Ta b l e A - 1 6 lists the specif ications for the wireless acce[...]

A-23 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series FE and GE Port Pinouts Ta b l e A - 1 7 describes the RJ-45 connector pi nouts for Fast Ethern et (FE) ports with Po wer over Ethernet (PoE). Some models support PoE using an optional module, an d some models do n[...]

A-24 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series Console and Auxiliary Port Connector Pinouts T able A-19 lists the pino uts for the console and auxi liary port connectors. FXS and FXO Port Connector Pinouts Ta b l e A - 2 0 lists the FXS and FXO connector pinouts. VD[...]

A-25 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series ADSL2+ Port Connector Pinouts Ta b l e A - 2 2 lists the ADSL2+ connector pinouts. V.92 Port Connector Pinouts Ta b l e A - 2 3 lists the V .92 connector pinouts. G.SHDSL Port Connector Pinouts Ta b l e A - 2 4 li[...]

A-26 Cisco Integrated Servic es Router Hardware Installation Guide Appendix A Technical Specific ations Cisco 860, 880, 890 Series Ta b l e A - 2 5 lists the pinouts for the sy mmetrical high-speed DSL (G.SHDSL) W AN port for four -pair products, includi ng the follo wing router models: • C888E • C888EW • C888EA Data BRI Port Connector Pinout[...]

A-27 Cisco Integr ated Service s Router Ha rdware Insta llat ion Gu ide Appendix A T echnical Specifications Cisco 860, 880, 89 0 Series Voice ISDN BRI Interface Pin Numbers and Functions Ta b l e A - 2 7 lists the interf ace pin numbers and fu nctions for the voic e ISDN BRI port. SFP Port Connector Pinouts Ta b l e A - 2 8 lists the pinouts for t[...]