Clifford III manual

Owner' s Manua l World-Clas s Aut o Securit y T M Smar t Remot e Starte r[...]

WARN IN G The Smart Re mote Starter III sys tem is de signed to be used ON LY on a fuel - injected , gaso line o r die sel pow ered ve hi cle with an auto matic trans mis sion . In stall ing a Smart Re mote Starter III on a ve hi cle that has a man ual trans mis sio n poses an EX TREME SAFETY RISK! Never in stall a Clif ford re mote en gine start i[...]

1 Ta ble of Con tent s Stan dard Fea tures of the Smart Re mote Starter III .............. . 2 Smart Re mote Starter III DOs and DON’Ts .................. . 5 Your 4- button/12- channel re mote con trols ................. . 6 How to use your key chain re mote con trol .................. . 6 How to re motely lock/un lock the doors ................[...]

Stan dard Fea tures of the Smart Re mote Starter II I q ✔ A Pair of 4-Button/12-Channel Remote Controls — You will never agai n fumble with your car keys in the dark or bad weathe r . The remote controls giv e you fingertip command of all these exciting convenience features from a typical range of 300 feet : • Remotely start or shut down your[...]

Stan dard Fea tures of the Smart Re mote Starter III (cont.) q ✔ Cold Weather Crankin g — Automatically cranks the engine for up to 1 0 seconds or until it starts, whichever occurs first. If the engine does not start, or starts and then stalls, your Smart Remote Starter III will automatically try t o restart the engine up to two additional time[...]

Stan dard Fea tures of the Smart Re mote Starter III (cont. ) q ✔ AutoStart Temperature Mod e — You will never return to your car to find a busted radiator or frozen oil in the crankcase. If you wish, you may set you r Smart Remote Starter III to AutoStart the engine if the engine temperature drop s below 15°F (–9°C). If you want to avoid a[...]

5 Re mote Start ing DOs and DON’Ts DO s • Park in an open, well-ventilated area . • Always engage the parking brake . • Make sure you put the transmission in PARK befor e shuttin g down the engine . • Set the air conditioner, heater, defroster and other accessorie s to the desired levels . • Turn on your vehicle’s “recirculate” fe[...]

Your 4-button/12-channel remote control s The 4-button/12-channel remote controls are ultra-sophisticated miniature radi o transmitters powered by a tiny 12-volt battery. Range is up to 300 feet. A weak remot e control battery will reduce range, as will electrical and radio interference. You wil l use your remote control to remotely start the engin[...]

How to remotely lock/unlock the door s To lock all the vehicle doors, press button 1 once. All the following will occur: • The doors will lock . • As confirmation from a distance, you will see two flashe s of the vehicle’ s parking lights . • The LED on the system’s PlainView switch will flash repeatedly. To unlock the doors, press button[...]

Diesel compatibilit y If your vehicle has a diesel engine, your Smart Remote Starter III will activate th e engine’s glowplugs for 20 seconds before actually starting the engine. To drive the vehicl e 1 . Unlock the doors by pressing button 1 on the remote control. The parking light s will blink once and the interior lights will turn on . 2. Ente[...]

Interfacing with factory theft deterrent device s If your vehicle has a factory-installed theft deterrent device, the Smart Remot e Starter III can make it a full-fledged remote controlled car alarm, arming the device every time you remotely lock the doors and disarming every time you remotel y unlock. Ask your system installer for details . AutoLo[...]

Ul traSe cure™ coded valet mod e Your secret valet code In seconds, thieves can disable all non-Clifford starter interrupt systems and alarms b y hotwiring the ignition and flickin g an easy to find “hidden ” valet switch. Your Smar t Remote Starter III has safeguards that absolutely ensure that a thief cannot enable th e valet mode as a way [...]

To en able valet mod e 1 . Turn the ignition switch to its “ON” position or start the engine . 2 . Enter your secret valet code on the PlainView switch, then return the switch to its center position . 3 . You now have 5 seconds to press the latched position to enter valet mode. Th e LED on the PlainView switch will glow continually for on-going[...]

The AutoStart feature s Your Smart Remote Starter III has two AutoStart features : AutoStart Battery Mode: This is an especially valuable feature when you need to leav e your vehicle parked for an extended period of time. If engaged, the system wil l automatically monitor the voltage level of the vehicle battery while you are away. If th e voltage [...]

User- selectable fea ture s Your Smart Remote Starter III system comes from the factory with all of its feature s pre-programmed as noted in the following table. No programming is required, but if you wish to change any of the settings, just use the procedure below. To restore the feature to its factory setting, just repeat the procedure : 1. Selec[...]

Adding new remote controls For other drivers in your family, or if you wish to control Clifford systems on you r other cars with the same remote control, you can buy additional remote control s from any Clifford Dealer (or call our Customer Service Department a t 800-824-3208) and program them into the system yourself. Each Smart Remot e Starter II[...]