Corega WLUSB2GO manual

User Manual 5 4 M W i r e l e s s U S B A da pt er WL USB2GO[...]

WL USB2GO Manual 1 1. Preface ............................................................................................................. 2 1.1 F eatures ..... ...............................................................................2 1.2 Packing Conten t ..... ...............................................................2 1.3 Hardware de[...]

WL USB2GO Manual 2 2 2 corega C G-WL USB2GO 54M Wireless USB Adapt er complies with IEEE802.11b/g standards. I ts 2.0 USB interface is suitable for any computer with USB port. I ts unique bearing cap design makes the cap less impossible to get lost. Moreover , C G-WL USB2GO provides wide transmission range , high qualit y and stable trans- mission.[...]

3 3 WL USB2GO Manual 3 1.3 Hardware description Bearing Cap USB Connecter Inside 1.4 Installation Steps Please confirm the following st eps before installing the product. Plug the product into the USB port  Put the Driver CD  Install the utility program and the driver  Confirm the Device status of the product  Set up T CP/IP  Open [...]

WL USB2GO Manual 4 2 Sof tware Installa tion 4 4 2.1 Hardware Installation Please plug corega WLUSB2GO into the USB port. After you plug it in, please install the software and driver . When the following pages appear , please click [cancel]. <Windows XP> <Windows 2000>[...]

5 5 WL USB2GO Manual 5 2.2 Utility and Driver Installa tion 1. Put Driver CD into the CD-ROM driv e. 2. Please select [English] 3. Click [Install Software][...]

WL USB2GO Manual 6 6 4. The [corega Wireless Adapter Setup] page. 5. Click [Continue An yway].[...]

7 WL USB2GO Manual 7 6. Click [F inish] to finish setup . 2.3 Verify the Hardware Status 1. Open [Control P anel]=>Double-click [System]. 2. Select [Hardware] tab=>Click [Device Manager] .[...]

WL USB2GO Manual 8 8 8 3. Select and double-click [CG-WL USB2GO]. 4. V erify that the device status of C G-WL USB2GO is [ This device is working properly]->Click [OK] to close this page.[...]

9 9 WL USB2GO Manual 9 3 S e t t i n g T CP /I P The following e xample is for Windows XP OS users: 1. Enter [Start Menu]=>selec t [Contr ol panel]=>select [Network]. 2. Right-click [ Wireless Network]( Windows 2000 users please select [Local Area Connection]) icon=>select [properties] 。 3. Select [Internet Protocol( TCP/IP)]=>Click [[...]

WL USB2GO Manual 10 10 10 User can use corega Wireless Utilit y to configure wir eless net- work. Af ter finishing configura tion, please check if the connec- tion works. Please confirm that user’ s computer is in the wireless radio wave range. If the computer is out of the radio range, the setup will not be seccessful. After user installed C[...]

11 11 WL USB2GO Manual 11 3. T o make connection, select one AP/SSID (eg:corega) and click [Conncet]. W hen the connection works, [Connected] will appear in the left button of this tab and the icon appears in front of the linked AP . W hen the connection failed,[Disc onnected] will appear . If the AP has set up the encr yption, please setup the the[...]

WL USB2GO Manual 12 12 12 If your AP/Router hav e set network security function, your wireless adapter needs to ha ve the same security setting. T he details of network security setting are described below . Please open corega Wireless Utility before y ou start to setup network security : Double click the icon in the system tra y to open the Utilit[...]

13 13 WL USB2GO Manual 13 2. Please follow the instructions: a. [Authentication Type]: indicates the authentication type of the AP/Router . Please confirm the setting of the AP/Router . ＊ [Open]: WEP open system is based on request and gr ant. It is essentially no authentication. ＊ [Shared]: WEP shared key is based on r equest, challenge, chal[...]

WL USB2GO Manual 14 14 5.2 Setting WP A WP A encr yption type can be divided into WP A-PSK, WP A2-PSK, WP A(or called WP A-EAP), and WP A2(or called WP A2-EAP). All settings should correspond to the settings of the current con- nected wireless network. 《 WP A-PSK and WP A2-PSK 》 1. Select an AP with [ WP A-PSK] or [ WP A2-PSK] authentication an[...]

15 WL USB2GO Manual 15 a. Authentication Type: Selec t [ WP A-PSK] or [ WP A2-PSK] (AP must support the func tion). b . Encr yption: Select [ TKIP] or [AES].(Same as AP) c. Enter the selected AP ’ s password in [ W AP Preshar ed Key] box and click [OK]. 《 WP A and WP A2 》 1. Select an AP with [ WP A] or [ WP A2] authentication and press [Conn[...]

WL USB2GO Manual 16 16 16 a. Authentication Type: selec t [ WP A]or [ WP A2-PSK] (AP must support the func tion). b . Encr yption: select [ TKIP] or [AES](Same as AP) c. I f the AP/router has [802.1x Setting] function, click it for advance setting . Please consult your MIS for details. d. Click [OK] to finish setting.[...]

17 17 WL USB2GO Manual 17 Chapter 6 will briefly introduce the sections in the setup utility . 6.1 Site Survey 1. The discription of these sections • SSID : Name of AP (or called ESSID). • BSSID : Mac Address of AP • Signal : Signal strength of AP • Channel : AP used channel • Encryption : what encrypted mechanism does AP used • Authen[...]

WL USB2GO Manual 18 18 4. Click [Rescan] to rescan and upgrade all the AP’ s information in time 5. Click [Connect] to start connecting the selec ted AP . 6. Save the selected AP’ s information to profile. For more details , please refer to 6.1.1. 6.1.1 Add one profile 1. Select one AP in the SSID column, eg: corega0205=>Click [A dd to Pr o[...]

19 WL USB2GO Manual 19 mend you to select [Infrastructure]. • T ransmit power: the amount of pow er used by a radio trans- ceiver to send the signal out. User can choose power value by sliding the bar . • [RTS Threshold] and [F ragment Threshold] : W e recommend you to use the default v alue 2312. User can adjust threshold numbers by sliding th[...]

WL USB2GO Manual 20 20 6.3 Link Status This tab displays the inf ormation of the link status. • Status: Displays the linked AP name and MAC address . When [Disconnect] appears in this box, the connection is failed. • Extra Info: link status and strength. • Channel:Current channel in use . • Link Speed: Show current transmit rat e and receiv[...]

21 WL USB2GO Manual 21 6.4 Statistics Statistics page displays the detail c ounter information. • T ransmit Statistics: Statistic of transmitted frames . • Receive Statistics: Statistic of received frames . • [Reset Counters]: Click [Reset Counter] to zero the sta tistic numbers of transmitting and receiving data. 6.5 Adv anced settings The a[...]

WL USB2GO Manual 22 22 • Wireless mode: Select wireless network mode(speed) - 802.11b/g mixed: Aut omatically detect 11b or 11g - 802.11b only: Frequency only 11b - 802.11g only: Frequency only 11g • 11b/g Prot ection: In order to keep the connec tion stable , please select [Auto] to automatically confirm which mode the wireless network is in.[...]

23 WL USB2GO Manual 23 6.6 IP Information The MAC A ddress and the IP information are displa yed in this tab . Click[Release] to release IP address, click [Renew] to renew IP information. 6.7 About The About tab displays the inf ormation of the utility version and the driver version.[...]

WL USB2GO Manual 24 24 24 There are 3 w ays for solving y our problems if WL USB2GO can ’t connect to Internet as below: (1) First , please see following “F AQ” to check your problem. (2) Please go to http://www .corega-asia.com to download the latest driver . (3) Please go to http://www .corega-asia.com, then click “Supports”=>select [...]

25 25 WL USB2GO Manual 25 Q2.How to keep the network connection quality well? A: (1) Move the AP nearer . (2) Remove barriers between AP and laptop . (3) Do not place AP on a metal shelf . (4) Please keep away from micr owav e, 2.4GHz cordless phone, and medical equipment. (5) Change the direction of your laptop or AP . Q3. What should I do when I [...]

WL USB2GO Manual 26 26 26 【 How to solve this pr oblem 】 : (1) Right-click on the [Network controller] under [Other de- vices] and select [Uninstall]. (2) When confirm delete message appears , click [OK] . (3) F ollow the manual to install the product again. Q5. What should I do when the network adapter icon appears a [x] symbol in the [Device[...]

27 27 WL USB2GO Manual 27 8 S e c i f i ca ti on Compliance Standard IEEE802.11, IEEE802.11b, IEEE802.11g USB Interface USB 2.0 Protoc ol CSMA/CA T ransmission Method DS-SS, OFDM Network T ype Infrastructure/802.11 Ad-Hoc Frequency Band/ Channel IEEE802.11b/g: 2.412GHz~2.472GHz T ransmission Rate IEEE802.11b: 11/5.5/2/1Mbps IEEE802.11g: 54/48/36/24[...]

corega 可瑞加科技於 1996 年成立於日本新橫濱，致力於提供 多元化的家用網路產品：包括乙太網路交換器、無線區域網 路系列產品、路由器、藍芽系列產品、以及與網路相關的產 品應用及服務。 corega 目前已是日本專業家用網路產品的暢銷品牌，並且 於 2002 年 2 月?[...]

www .corega.com.tw www .corega-asia.com 7F ., No. 10, Lane 345, Y angGuang St. Nei-Hu Chiu, T aipei City 114, T aiwan TE L : + 8 86 - 2- 8 7 51 - 91 6 4 F AX: + 88 6 -2 - 87 5 1 -9 1 74 corega T aiwan Inc. PN : T30-UM8014-00 Rev .B[...]