Craftsman 320. 61352 manual

Operator's Manual n T HAMMERHEAD TM 12.0-VOLT LITHIUM-ION CORDLESS AUTO-HAMMER Model No. 320. 61352 Powered by an ENERGY STAR " quaJified battery charger for a better environment WARNING: To reduce the risk of injury, the user must read and understand this Operator's manual before using this product. * Warranty * Safety * Assembly * [...]

Warranty Page 2 Safety Symbols Page 3 Safety Instructions Pages 5-10 Description Pages 11-12 Assembly Page 12 Operation Pages 13-16 Maintenance Page 17 Troubleshooting Page 17 Exploded View and Parts List Pages 18-19 Sears Repair Parts Phone Number Back Cover ONE YEAR FULL WARRANTY ON CRAFTSMAN® TOOL If this Craftsman tool fails to give complete s[...]

The purpose of safety symbols is to attract you attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful atten- tion and understanding. The symbol warnings do not, by themselves, eliminate any danger. The instructions and warning they give are no substitutes for proper accident prevention measures. WAR[...]

Some of these following symbols may be used on this tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Curren[...]

GENERAL SAFETY RULES WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious personal injury. The term "power tool" in all of the warnings listed below refer to corded power tools or battery-operated (cordless) power tools. READ AND SAVE THESE INSTRU[...]

Keep the Auto-Hammer dry, clean, and free from oil and grease. Always use a clean cloth when cleaning. Never use brake fluids, gasoline, petroleum- based products or any strong solvent to clean the hammer. Do not expose the Auto=Hammer to rain or wet conditions. Water entering the tool will increase the risk of electric shock. Do not overreach. Kee[...]

Use safety equipment. Always wear eye protection. Safety equipment, such as dust masks, non-skid safety shoes, hard hat and hearing protection, used for appropriate conditions will reduce personal injuries. Avoid accidental starting. Ensure that the switch is in the off position before plugging in. Carrying power tools with your finger on the switc[...]

Disconnect the plug from the power source and/or the batter pack from the power tool before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the po[...]

When the battery pack is not in use, keep it away from other metal objects, such as paper clips, coins, keys, nails screws or other small metal objects that can make a connection from one terminal to another. Shorting the battery terminals together may cause burns or a fire. Under abusive conditions, liquid may be ejected from the battery. Avoid co[...]

SERVICE = Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. • When servicing a power tool, use only identical replacement parts. = Follow instructions in the Maintenance section of this manual. Use of unauthorized parts or failure to[...]

KNOW YOUR HAMMER (Fig. 1) Fig. 1 Battery pack Battery pack release button Trigger switch Magnetic sleeve Hammerhead (recessed within magnetic sleeve) PRODUCT SEPCIFICATION Clamp 7/16-in. Motor 12 Volt DC Hammer Weight (without battery) 1.1 Ibs Battery Type Lithium-Ion Battery Voltage 12.0 Volt DC Charger Input 120-Volts, 60 Hz AC only Optimum Charg[...]

HAMMERHEAD The hammerhead impacts the nails automatically when the tool is turned on. MAGNETIC SLEEVE The magnetic sleeve holds the head of the inserted nail against the recessed hammerhead for the beginning of nail driving. The sleeve retracts at the end of nail driving to allow the hammerhead to drive the nail head flush to the workpiece. LED WOR[...]

LOW BATTERY CAPACITY iNDiCATOR • If the LED begins to rapidly flash when the trigger switch is depressed, the battery pack's power has run out, and the battery pack should be recharged. Unlike other battery pack types, Lithium-Ion battery packs deliver fade-free power for their entire run time. The tool will not experience a slow, gradual lo[...]

2. Make sure that the latch on the battery pack snaps into place and the battery pack is secured to the tool before beginning operation. TO DETACH BATTERY PACK (Fig. 3} ,_ CAUTION: Avoid the possibility of accidental starting: always take care not to activate the trigger switch when attaching the battery pack or making any adjustment to the tool. 1[...]

HAMMERING NAILS (Fig. 6) 1. Attach the battery pack to the Auto-Hammer. 2. Secure the material to be nailed with clamps to keep it from turning when hammering. 3. Fig. 6 Insert the head of the nail into the magnetic sleeve and up against the hammerhead, where it will be held in place by magnetism. Place the tip of the nail against the workpiece. 4.[...]

Recommended Nails to Use The Auto-Hammer is versatile for use with a variety of nails. Nails with diameters less than 7/16-in and lengths equal to or less than 2-1/2 in. are recommended for use with this Auto-Hammer. Refer to below table for recommended nails to use with: NO. 1 2 3 4 5 6 7 Nail Type Size Shank Diameter Bright Common 4d 0.1" Br[...]

,_, WARNING: To avoid serious personal injury, always remove the battery pack from the tool when cleaning or performing any maintenance. WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other parts may create a hazard or cause product damage. WARNING: It is not recommended to use compressed dry air to clean the Au[...]

12.0 VOLT LITHIUM-ION CORDLESS AUTO-HAMMER MODEL NUMBER 320.61352 The Model Number will be found on the Nameplate attached to the handle of the Auto-Hammer. Always mention the Model Number when ordering parts for this tool. / 61352 Manual_Revised_08 0924 Page 18[...]

12.0 VOLT LITHIUM-ION CORDLESS AUTO-HAMMER MODEL NUMBER 320.61352 The Model Number will be found on the Nameplate attached to the handle of the Auto-Hammer. Always mention the Model Number when ordering parts for this tool. 1 3704397000 Nail Remover 1 2 2770153000 5120 Power Pack 1 3 3704254000 Handle Hoop 1 4 2822577000 Motor&Gear ASSY 1 5 561[...]

Your Home For expert troubleshooting and home solutions advice: manage home www.managemyhome.com For repair - in your home - of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it ! For the replacement parts, accessories and owner's manuals that you need to do-it-y[...]