Craftsman 580.751781 manual

OWNER'S MANUAL MODEL NO. 580.751781 ® HOURS: 1 Mon. - Frl. 8 a.m. to 5 p.m (CST) CAUTION: Read and Follow all Safety Rules and Instructions Before Operating This Equipment 7.8 HORSEPOWER 2500 PSi 3 GPlVi HiGH PRESSURE WASHER o Assembly . Operation ° Customer Responsibilities o Service and Adjustment ° Repair Parts SEARS, ROEBUCK and CO., Ho[...]

SAFETY RULES ,_ CAUTION: ALWAYS DISCONNECT SPARK PLUG WIRE AND PLACE WIRE WHERE ,_ IT CANNOT CON- .._ TACT SPARK PLUG, TO PREVENT ACCIDENTAL STARTING WHEN SETTING UP, TRANSPORTING, ADJUSTING OR MAKING REPAIRS TO YOUR HIGH PRESSURE WASHER. TRAINING: • Engine exhaust gases corrtain DEADLY carbon monox- ido gas_ This dangerous gas, if breathed in su[...]

CONGRATULATIONS on your purchase of a Sears Crafts- man high pressure washer. It has been designed, engi- neered and manufactured to give you the best possible dependability and performance_ Should you experience any problem you cannot easily remedy, please contact your nearest Sears Service Cen- ter/Department or call the 1-800 number listed on th[...]

TABLE OF CONTENTS SAFETY RULES ............................................................ 2 PRODUCT SPECIFICATIONS ....................................... 3 ACCESSORIES AND A'I-I'ACHEMENTS ...................... 5 CONTENTS OF HARDWARE PACK ............................. 6 ASSEMBLY .........................................................[...]

ACCESSORIES AND ATTACHMENTS These accessories and attachments were available when the high pressure washer was purchased. They are also available at most Sears retail outlets and service centers. Most Sears stores can order these items for you when you provide the model number of your high pressure washer. Some of these accessories may not apply to[...]

CONTENTS OF HARDWARE PACK Parts packed separately in carton F- "_, F -*_- Main Unit Pa_s Cadon Wire Basket Owner's Manual Parts packed in Parts Carton Guide Handle High Pressure Hose (2) Rubber Foot Pads Gun and Wand Wheels Detergent Pickup Tube and Filter Rear Wand Holder Nozzle Cleaner Kit Oil Fill Cap/Breather Motor Oil Quick-Connect A[...]

ASSEMBLY Read these instructions and Operator's Manual in its en- tirety before you attempt to assemble or operate your new high pressure washer. Your high pressure washer has, for the most part, been assembled at the factory, except those parts left unassembled_ Before you can operate your new high pressure washer, you must assemble the wheel[...]

ASSEMBLY ,, Attach wire basket to bent arms of support legs with e #10 self-drilling screws (Fig_ 4) using 5/16" (6ram) wrench. The gun holder should be positioned to the left. Be sure loop of support is pointing upward. SUPPORT FIG. 4 TO ASSEMBLE REMAINING COMPONENTS IMPORTANT: YOU MUST ASSEMBLE WAND AND AT- TACH ALL HOSES BEFORE YOU START EN[...]

OPERATION KNOW YOUR HIGH PRESSURE WASHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR HIGH PRESSURE WASHER. Compare the illustrations with your high pressure washer to familiarize yourself with the locations of various controls and adjustments, Save this manual for future reference, PRESSURE REGULATOR AND FILTER GUIDE HANDLE[...]

OPERATION HOW TO USE YOUR WASHER IF YOU HAVE ANY PROBLEMS OPERATING YOUR PRESSURE WASHER, PLEASE CALL THE PRESSURE WASHER HELPLINE AT 1-800-222-3136. STOPPING YOUR PRESSURE WASHER o First, move engine RUN/STOP switch to"OFF" position (Fig=10). FIG. 1O o Simply shutting OFF engine will not release pres- sure in the system. Pull the trigger[...]

OPERATION APPLYING DETERGENT WITH ADJUSTABLE NOZZLE IMPORTANT: USE SOAPS DESIGNED SPECIFICALLY FOR PRESSURE WASHERS. HOUSEHOLD DETER- GENTS COULD DAMAGE THE PUMP, IMPORTANT: YOU MUST ATTACH ALL HOSES BE- FORE YOU START THE ENGINE STARTING THE EN- GINE WITHOUT ALL THE HOSES CONNECTED WILL DAMAGE THE PUMP_ Pressure washers are useful cleaning tools d[...]

OPERATION NOTE: When adding oil to the engine crankcase in the future, use only high quality detergent oil rated with API service classification SC, SD, SE, SF, SG rated SAE 30 weight. Use no special additives. Select the oil's viscosity grade according to your expected operating temperature. I colder 32°F warmer 5W30 _ SAE30 TO SEPARATION AN[...]

OPERATION SENSING LOW OIL PRESSURE FIG. 20 FULL |1 HALF RUN FIG. 21 ,, Grasp the starter grip and pull slowly until you feel resistance_ Then pull rapidly one time. o When engine starts, move choke lever to "RUN" posi- tion. If engine fails to start, move choke lever to "RUN" position and pull starter rope (maximum 2 pulls)_ o I[...]

CUSTOMER RESPONSIBILITIES MAINTENANCE SCHEDULE FILL IN DATES AS YOU COMPLETE REGULAR SERVICE MAINTENANCE TASK PRESSURE WASHER Check/clean inlet filter and screen Check high pressurehose. Check detergenthose. Check gun and wand for leaks. Check pump oil. Purge pump of air and contanirnents ENGINE Check oil level, Change engine oil. _, Retorque head [...]

CUSTOMER RESPONSIBILmES CHANGING ENGINE OIL Purge Pump of Air and Contanlments: To remove the air from the pump, follow these steps: o Set up the pressure washer as described in the AS- SEMBLY section and connect the water supply. ,, Remove the nozzle attachment from the gun. ,, Pull the trigger on the gun and hold. To remove the contaniments from [...]

CUSTOMER RESPONSIBlUTES CLEAN/REPLACE SPARK PLUG SERVICE AIR CLEANER I A CAUTION: NEVER RUN THIS UNIT WITHOUTTHE 1 COMPLETE AIR CLEANER SYSTEM INSTALLED| ON THE ENGINE. THIS COULD RESULT IN FRE- / MATURE WEAR TO THE ENGINE. / Your engine will not run properly and may be damaged if you run it using a dirty air cleaner. Clean or replace the air clean[...]

SERVICE AND ADJUSTMENTS ENGINE SPEED CAUTION: ENGINE SPEED WAS PROPERLY AD- JUSTED AT THE FACTORY AND SHOULD RE- QUIRE NO ADDITIONAL ADJUSTMENT. DO NOT ATTEMPT TO CHANGE ENGINE SPEED. IF YOU BELIEVE THE ENGINE IS RUNNING TOO FAST OR TOO SLOW, TAKE YOUR PRESSURE WASHER TO SEARS AUTHORIZED SERVICE CENTER FOR RE- PAIR AND ADJUSTMENT. CHANGING ENGINE G[...]

SERVICE AND ADJUSTMENTS O o o o Remove additional debris by back flushing water sup- ply through wand (Fig, 30). Back flush between 30 to 60 seconds. Turn wand to stream spray and move nozzle from low to high while flushing. Reinstall nozzle into the wand. DO NOT overtighten_ Reconnect the wand to the gun Reconnect the water supply, tum on the wate[...]

TROUBLESHOOTING CORRECTION 1, Pull nozzle backward for high PROBLEM CAUSE Pump has following problems: 1 Nozzle in low pressure mode. failure to produce pressure, erratic pressure, chattadng, loss of pressure, 2. Low regulator pressure low water volume. 3 Water inlet Is blocked. 4. Inadequate water supply 5r Inlet hose is kinked or leaking 6 Clogge[...]

I- o_ _a t_ 34 32 t2 OTHER iTEM 79 MUST BE LOCATED OPPOSITE LOWER CORNER OF CASTING, 37 3t 0 z Q "o -n m u) (/) nl 3> (n ..i- ra -n _n r J1 co :o m 3O "0 -n -i (/)[...]

CRAFTSMAN 2500 PSI HIGH PRESSURE WASHER 580.751781 REPAIR PARTS ITEM PART NO. 1 90508 3 84021 4 88325 5 90878 6 78298 7 78299 8 96404 9 96405 10 78831B 11 83465 12 77395 13 87840 14 85000 15 84687 16 95203 17 84508 18 70644 19 84346 20 52858 21 95635 22 38750 24 87985 25 86292 26 87836 27 93728A 28 94222Q 29 49808 30 88521 31 75402 32 95189 33 3928[...]

o_ I-" 1 I I I ! L_ TAPER SHAFT 6 7 66 67 W A'I'H R OUT < 5B /+1 @ o "U -r "0 33 m (n c: :o m 3> O) ..r m u1 CO # +[...]

CRAFTSMAN 2200 PSI HIGH PRESSURE WASHER 580.751651 REPAIR PARTS ITEM PART NO. 1 93871 2 96430-A 3 93869 5 95165 6 96865 7 96542 8 93790 9 95386 10 95217 11 96400 12 92479 13 93873 14 40945 15 94404 16 93680 17 93668 18 93667 19 96015 20 95454 21 95895 22 96053 23 95504 24 95503 25 96005 26 95896 27 23707 28 93652 29 95416 30 94402 31 93673 32 93678[...]

7 ,|0- -_ 11 12 34 62 37 58 49 28[...]

CRAFTSMAN 2200 PSI HIGH PRESSURE WASHER 580.751781 REPAIR PARTS ITEM PART NO, 1 90508 2 77182E 3 81675 4 81810 5 83312 6 90695A 7 90876 8 78631 9 90948 10 78608A 11 78601 12 78602 13 83015 14 81671 15 90051 16 91846 17 78609 18 90947 19 82774 20 86962 21 78604 22 83502 24 83782 25 86037 28 86384 27 83781 28 78643 29 63503 30 89739 DESCRIPTION iTEM [...]

o-, 26 47 3O 3t 43 44 45 48 46 42 32 13 36 27 14 28 !6 37 38 8 21 39 40 19 17 5O 2 7 5O 12 13 =o 0 z "o 33 m (n o') c 3_ m u) -r Ill =0 ol oi co _o m "o "o 2_ -4 car)[...]

CRAFTSMAN 2500 PSI HIGH PRESSURE WASHER 580.751781 REPAIR PARTS ITEM PART NO. 1 76380 2 76389 3 88411 4 81694 5 72683 6 88057 7 76390 8 83337 9 78658 10 76354 11 89213A 12 76349 13 81695 14 76359 15 78645 16 76365 17 78699B 18 83335 19 89096 21 88055 22 78691 23 78367 24 76362 25 78692 26 78606 27 76361 28 89230 DESCRIPTION ITEM PART NO. Connector [...]

OWNER'S MANUAL MODEL NO. 580.751781 IF YOU NEED REPAIR SERVICE OR PARTS FOR REPAIR SERVICE CALL THIS TOLL FREE NUMBER 1-800-4,_EPAIR (1-800-473-7247) FOR REPLACEMENT PARTS INFORMATION AND ORDER- ING, CALL THIS TOLL FREE NUMBER: 1-800-FON-PART (1-800-366-7278) ® 7.8 HORSEPOWER 2500 PSi 3.0 GPM HIGH PRESSURE WASHER Each High Pressure Washer has[...]