Creek Audio CD43 mk 2 manual

Creek CD43 mk 2 C C o o m m p p a a c c t t D D i i s s c c P P l l a a y y e e r r Ope ra ti ng Inst ruc tion s[...]

2 CD 4 3 mk 2 Compact Disc Player This CD player is designed to operate on 220-240 V olts 50Hz AC or 1 10-120 V olt s 60 Hz AC. Normally the equipment is supplied with a mains lead with a fitted 3 pin plug suitable for the country it is to be used in. If the plug needs to be changed, please follow the instructions below . PLUG FITTING INSTRUCTIONS [...]

3 CD 4 3 mk 2 Compact Disc Player NOTE The equipment has been tested and found to comply with the limits for a Class B digit al device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates and can radiate radio frequency e[...]

4 CD 4 3 mk 2 Compact Disc Player CAUTION u Before connecting or disconnecting a unit from your audio system, make sure that you switch off the power to each component. u Ensure that you make the correct connections, paying attention to the L (lef t channel) and R (right channel) marks. Plug in the cable securely . Loose connections will result in [...]

5 CD 4 3 mk 2 Compact Disc Player MAIN UNIT 1. S T ANDBY button 2. Disc T ray 3. OPEN/CLOSE button 4. ST O P button 5. P AUSE button 6. PLA Y button 7. SKIP BACK button 8. SKIP F O RW A R D button 9. SCAN BACK button 10. SCAN F OR W A R D button 11 . REPEA T button 12. RANDOM button EXPLANA TION OF CONTROLS DISPLA Y WINDOW A. REMAIN ing time indica[...]

6 CD 4 3 mk 2 Compact Disc Player EXPLANA TION OF CONTROLS REMOTE CONTROL UNIT A. S T ANDBY B. OPEN/CLOSE C. INTRO D. F AST E. REPEA T A ↔ ↔ B F. SHUFFLE / RANDOM PLA Y G. REPEA T H. P AUSE I. NUMERICAL track selection J. REMAINING TIME K. PROGRAM L. SEARCH back & forward M. SKIP TRACK back & forward N. PLA Y P. S T OP STOP PLAY PROG TI[...]

7 CD 4 3 mk 2 Compact Disc Player COMP ACT DISCS HANDLING THE DISCS This unit has been designed to play Compact Discs bearing the identification logo shown below . DVD discs cannot be played. u Always place the CD in the disc tray with the label facing up. CD’s can only be played on one side. u T o remove a CD from its storage case, press down on[...]

REMOVING THE DISC The disc tray can be opened at any time by pressing the OPEN/CLOSE button. Remove the disc only after the tray has fully opened. CAUTION u Do not put anything except a Compact Disc into the tray . Foreign objects can damage the mechanism. DVD’s will not play . u Do not force the tray by hand during the opening and closing operat[...]

playing from the beginning of the first track. Y ou may also go straight to a specific track by using one of the SKIP buttons or . In this case the disc will start playing the selected track when the PLA Y button is pressed. The numeric keys on the remote handset allow direct access to the desired track. 7 . At the end of the last track the CD will[...]

Press the S T OP button. The disc will stop playing, the PLA Y symbol will disappear and the track indicator will show the total number of tracks. The time indicator will display the total playing time.  T O P AUSE THE DISC PLA Y Press the PAUSE button. The disc will stop playing at the current play position and the PAUSE symbol will be displaye[...]

The CD player will skip ahead to the next track each time the or button is pressed. Continuously pressing the or button makes the CD player skip ahead through the disc, track by track, until you reach the desired place. The CD player can be advanced to the last track in this way . When the last track is reached, the CD player will return back to tr[...]

 T O SEARCH QUICKL Y FOR A P ARTICULAR POINT O F A TRACK During PLA Y mode press and hold the or buttons for fast-forward and fast-back operation. During PLA Y mode: When or button is pressed, the sound will be muted to about 1/4 of the normal volume level for the duration of the fast-forward or fast- back operation. During PAUSE mode: Pressing [...]

Enter the third choice - track 8 in the same way . Press the PROG button to store the third choice. Press the PLA Y button. The first programmed track will start playing.  LISTENING TO A PROGRAMMED SEQUENCE 1 . Press the PLA Y button. The PLA Y symbol will be displayed. 2 . The disc will start playing the first programmed track. NOTE: When playi[...]

REPEA T DISC PLA Y Use the REPEA T button to repeat the disc play of a track, all tracks on the disc, or a programmed sequence of tracks.  REPEA T ONE TRACK Make sure that the PROGRAM function has not been selected. 1 . Press the REPEA T button once and the REPEA T 1 message will appear . 2. Select the desired track using the or or numeric butto[...]

TROUBLESHOOTING GUIDE If you have followed the instructions, and are having difficulty operating your comp act disc player , please use the simple guide below to help you solve the problem. Here we have listed the most common hiccups experienced by the users, which we hope will be of some help. Locate the SYMPTOM in t able below and then check the [...]

2 Bellevue Road, Friern Barnet, London N11 3ER , England Tel: + 44 + (0)20 - 8361 4133 Fax: + 44 + (0)20 - 8361 4136 E-mail: info@creekaudio.co.uk Internet: www.creekaudio.co.uk Creek Audio Limited reserves the rights to modify or change the specification of its products without notice.[...]