D-Link DCS-6111 manual

[...]

2 D-Link DCS-6111 User Manual Table of Contents Product Overview ........................................................ 4 Package Contents ................................................... 4 System Requirements ............................................. 4 Introduction .............................................................. 5 Features [...]

3 D-Link DCS-6111 User Manual Table of Contents Networking Basics .................................................... 80 Check your IP address .......................................... 80 Statically Assign an IP address ............................. 81 Reset and Restore ..................................................... 82 External I/O Port ..[...]

4 D-Link DCS-6111 User Manual Section 1 - Product Overview System Requirements • Windows ® XP or Windows Vista ® • At least 256MB of memory (512MB recommended) • An available Ethernet connection • Internet Explorer 6.x or higher • VGA card resolution: 800 x 600 or above • CPU: 1.7GHz or above (2.8GHz plus processor with 512MB memory a[...]

5 D-Link DCS-6111 User Manual Section 1 - Product Overview Introduction The DCS-6111 is a xed dome network camera for indoor, ofce or home use, and designed to target the middle- market. With an ultra Wide Dynamic Range (WDR) CMOS sensor, the DCS-6111 is used to provide better performance surveillance results under different lighting conditio[...]

6 D-Link DCS-6111 User Manual Section 1 - Product Overview • Powerful Sur veillance - The DCS-6111 uses the WDR VGA Progressive CMOS technology that delivers exceptional picture quality. The Wide Dynamic Range capability achieves high resolution, more detailed images in high contrast lighting conditions (for example, strong backlight). With[...]

7 D-Link DCS-6111 User Manual Section 1 - Product Overview • Supported Protocols - The DCS-6111 supports IPv6, the latest version of the Internet Protocol and a wide variety of protocols such as RTSP, FTP, SMTP, NTP, HTTP and HTTPS. In addition, UPnP DDNS and LLT D proto col s are supp orte d for Win dows Vista users . Users can sign up wit[...]

8 D-Link DCS-6111 User Manual Section 1 - Product Overview Hardware Over view Connections DC Power Connector The DC power connector is located on the side panel of the DCS-6111. This 12V DC single-socket, supplies power to the network camera. Ethernet Cable Connector (PoE) The ne twor k cam era’ s sid e pane l fea ture s an RJ -45 co nnec tor for[...]

9 D-Link DCS-6111 User Manual Section 1 - Product Overview Hardware Over view LEDs Status LED Blinking Red: indicates power is being supplied to the camera. Solid Green: indicates that a connection has been established via Ethernet port. Blinking Green: indicates trafc movement in the camera. The Status LED will not glow if an Ethernet connectio[...]

10 D-Link DCS-6111 User Manual Section 2 - Installation Hardware Installation WhenMountingtoaCeiling Find a suitable place to install the camera using the alignment stencil. Place the camera at the desired operating location and insert the screws through the two holes located at the base of the camera. Use a screwdriver to tighten and s[...]

11 D-Link DCS-6111 User Manual Section 2 - Installation NetworkDeployment General Connection (without PoE) Connect the network camera to a switch via an Ethernet cable. Connect the supplied power cable from the camera to a power outlet. ConnectionwithaPoESwitch If usin g a PoE switc h, con nect the netw ork camera to the switc h via [...]

12 D-Link DCS-6111 User Manual Section 2 - Installation T urn on the computer and insert the D-Link DCS-6111 Autorun CD into the CD-ROM drive . The fol lowin g st ep- by-st ep inst ructi ons displayed are shown when using Window s Vista ® operating system. The steps and screens are similar when using other[...]

13 D-Link DCS-6111 User Manual Section 2 - Installation Click I Agree to accept the License Agreement. Click I Agree Click the Br owse b ut ton if yo u wo uld lik e t o c han ge th e de st in ati on of installation. Otherwise, click Install to continue. Note: Installation may take sever al minutes to complet e. Click Install[...]

14 D-Link DCS-6111 User Manual Section 2 - Installation To start the installation click Install. Note: The installation may take sev eral minutes to complete . Click Finish Click Finis h to complete installation and the D-Link Installation Wizard window will pop up for camera conguration. Click Install[...]

15 D-Link DCS-6111 User Manual Section 3 - Conguration Click Manual Setup ConguringY ourCamerawiththeInstallationWizard If the D-Link Installation Wizard window does not pop up after completion of software installation, click on the icon that was created in your Windows Start Menu. The Installation Wizard will appear a[...]

16 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Enter a password, and conrm the password for your admin acccount and click Next . Note: The default administrator username is admin and the password is left blank. The password can also be changed after installation.[...]

17 D-Link DCS-6111 User Manual Section 3 - Conguration The PPPoE Setting s c r e e n d i s p l a y s . E n t e r t h e u s e r n a m e a n d p a s s w o r d p r o v i d e d b y y o u r I S P t o c o n n e c t t o t h e I n t e r n e t b y P P P o E . Click Next and skip to the setup screen as seen in page 19. The Network Type sc r e e n di sp la[...]

18 D-Link DCS-6111 User Manual Section 3 - Conguration Check the Get IP by DHCP Ser ver automatically box to obtain a new IP address every time the camera starts up. Click Next to continue. Select UPnP Port For warding if your router supports this function. If not, choose Manual to manually enter your port numbers. Click [...]

19 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next A window will pop up asking you if you want to access the DCS-6111 via mobile phone. Clicking Ye s will set the video resolution to 176x144. Click Next to continue. Click Yes[...]

20 D-Link DCS-6111 User Manual Section 3 - Conguration Click  Apply to apply the settings listed in the window to the device. The application may take a few minutes to process. Click Apply A w in dow wil l po p up to co nr m th at th e app lic ati on wa s su cc ess ful ly congured. Click OK to continue. A new windo w will pop up disp[...]

21 D-Link DCS-6111 User Manual Section 3 - Conguration Double-click DCS-6111 in the Installation Wizard window to launch the camera’s web conguration page. Note: Please see the user manual f or more inf ormation. Enter admin as the defa ult user nam e and leave the pas swo rd blank by default. Click OK to continue.[...]

22 D-Link DCS-6111 User Manual Section 3 - Conguration This section shows your camera’s live video. You can congure your settings using the buttons in the window. For more information on using the web conguration, please refer to the user manual.[...]

23 D-Link DCS-6111 User Manual Section 3 - Conguration AdjustingtheLens Based on the live image retrieved from the camera, adjust the camera lens by performing the following procedures: AdjustingtheViewingAngle Loosen the pan screw and turn the lens module left and right until the desired position is achieved. Tighten the pan scre[...]

24 D-Link DCS-6111 User Manual Section 3 - Conguration AttachingtheEnclosure Once the lens is properly adjusted, rearrange the light shield so that it will not obstruct the lens during surveillance. Place the dome enclosure over the network camera so that the LED sticker on the dome enclos ure is properl y aligned with the camera ’s LED.[...]

25 D-Link DCS-6111 User Manual Section 3 - Conguration W eb-basedCongurationUtility To access the conguration utility, open a web-browser such as Internet Explorer and enter the IP address of your Network Camera (http://192.168.0.120) Note: In the example, this addr ess is 192.168.0.120. Y our address may di er . Type Admin in the[...]

26 D-Link DCS-6111 User Manual Section 3 - Conguration LiveVideo As seen by Mozilla Firefox and Netscape users, Quick Time player is invoked to stream the live video.[...]

27 D-Link DCS-6111 User Manual Section 3 - Conguration UsingR TSPPlayers Quick Time Player Real Player VLC media player mpegable Player pvPlayer 1. Launch a RTSP player. 2. Choose File > Open URL. 3. Type the URL command in the text box and then click OK. URL command = r tsp://<ip addr ess of your camera>:<r tsp por t>/<a[...]

28 D-Link DCS-6111 User Manual Section 3 - Conguration Using3GPPMobilePhones To view streaming media using mobile phones, make sure the Network Camera is setup on the Internet. To utilize this feature, please check the Network Settings for your camera. 1. Most of the players on 3GPP mobile phones do not support RTSP authentication. Make[...]

29 D-Link DCS-6111 User Manual Section 3 - Conguration Camera Logout: Logout the camera server and close the browser. Client Settings: Click this button to access the Client Settings. Snapshot: Capture a still picture of a video. This section shows your camera’s live video. You can congure the settings using the buttons listed below. Disabl[...]

30 D-Link DCS-6111 User Manual Section 3 - Conguration 1/2 Digital Zoom - Refer to the previous page for more information. 3/4 Start/Stop Recording - Click (#3) to start recording. Video clips will be recorded in MP4 format to your computer. Press the button again (#4) to stop recording. If you close your web browser, the video will stop recordi[...]

31 D-Link DCS-6111 User Manual Section 3 - Conguration Snapshot This page shows a snapshot image of a live video taken from DCS-6111 network camera.[...]

32 D-Link DCS-6111 User Manual Section 3 - Conguration Stream Options: Media Options: Protocol Options: UDP Protocol: UDP Unicast: UDP Multicast TCP: HTTP Protocol: Record Options: Select which video stream prole to use. Th er e are 3 sele ctab le Medi a Opt ions for you r str eam prole. The Default setting is Video and Audio . Ther e are [...]

33 D-Link DCS-6111 User Manual Section 3 - Conguration Setup Wizard To quickly congure your network camera, click In ter net Connection Setup Wizard . Otherwise, click Manual Internet Connection Setup to manua lly cong ure you r network camera. To q ui ck ly c on g ur e yo ur n et wo rk c am er a’ s mo ti on detection settings, click [...]

34 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Click Next Select PPPoE if the camera is directly connected to the Internet through a DSL modem and your ISP (Internet Service Provider) requires you to use PPPoE for the Internet connection. Cli ck Next to continue and skip to Step 2 on page 35. Select DHCP if you are unsure whic[...]

35 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Click Next If you hav e se le ct ed PPP oE , en te r yo ur use rn am e an d password. Click Next to continue. Select Static IP if you r Inte rnet Ser vi ce Pro vi der has pr ov id ed you wit h con nec ti on sett ing s, or you wi sh to set a static address within your home network.[...]

36 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Click Next Click Next With a Dynamic DNS account, the camera automatically updates your IP address. To enable DDNS , enter your host information. Click Next to continue. Enter a name for your camera and click Next t o continue. Congure the correct time to ensure all the events [...]

37 D-Link DCS-6111 User Manual Section 3 - Conguration Click Apply Once you have selected Dynamic , PPPoE , or Static , you will see a summary of your camera’s settings. Click Apply to save and activate your settings.[...]

38 D-Link DCS-6111 User Manual Section 3 - Conguration MotionDetectionSetupWizard This wizard will guide you through a step-by-step process to congure your new D-Link Camera’s motion detection functions. Click Next to begin the process. Click Next This screen will allow you to enable or disable the motion detection feature. Click N[...]

39 D-Link DCS-6111 User Manual Section 3 - Conguration Click Next Select the recording time and date for your camera. Click Next to continue. Note: Recording camera footage will take up space on your hard drive. I t is recommended that you have sufficient disk space for Alway s function. This step allows you to specify your event notication, [...]

40 D-Link DCS-6111 User Manual Section 3 - Conguration Click Apply You have completed the Motion Detection Wizard. Click Apply to activate and save your settings.[...]

41 D-Link DCS-6111 User Manual Section 3 - Conguration LAN Settings: DHCP: Static IP Client: IP Address: Subnet Mask: Default Gateway: Primary DNS: Secondary DNS: Enable UPnP Presentation: Settings for your local area network. Select this connection if you have a DHCP server runnin g on your network and wou ld like a dynamic IP address to be ass[...]

42 D-Link DCS-6111 User Manual Section 3 - Conguration Enabling UPnP port forwarding allows the Network Camera to open a secondary HTTP port on the router. You have to add the secondary HTTP port number behind the Network Camera’s public address in order to access the Network Camera from the Internet. For example, when the HTTP port is set to [...]

43 D-Link DCS-6111 User Manual Section 3 - Conguration Enter the IPv6 router address. Enter the IPv6 DNS address. Enable this setting if your ISP (DSL service) is using PPPoE. You may already have both Username and Password given by your ISP, or you may check with your ISP. The Connect Status will be determined automatically by the system. You m[...]

44 D-Link DCS-6111 User Manual Section 3 - Conguration Access name for stream2: HTTPS Port: FTP Port: RTSP Streaming: Authentication: Access name for stream1: Access name for stream2: The default name is video2.mjpg. Access name for stream 1 / Access name for stream 2 : The access name is used to differentiate the streaming source. When using Mo[...]

45 D-Link DCS-6111 User Manual Section 3 - Conguration The accessibility of the RTSP streaming for the three authentication modes are listed in the following table. Quick Time player Real Player VLC media player mpegable Player pvPlayer Disable O O O O O Basic O O X X X Digest O X X X X O indicates that the authentication mode is supported by th[...]

46 D-Link DCS-6111 User Manual Section 3 - Conguration The port number that you use for RSTP streaming, the default port number is 554. RTP (Real Time Protocol) Port is used to streaming audio and video while RTCP (Real Time Control Protocol) port is used to monitor QoS of RTP stream. Note: RTP video por t and RTP audio por t must be an “ even[...]

47 D-Link DCS-6111 User Manual Section 3 - Conguration For example, if some content is associated with group 239.1.1.1, the source will send data packets destined to 239.1.1.1. Receivers for that content will inform the network that they are interested in receiving data packets sent to the group 239.1.1.1. The receiver “joins” 239.1.1.1. The[...]

48 D-Link DCS-6111 User Manual Section 3 - Conguration Enable DDNS: Server Name: Host Name: Username: Password: Status: Click to enable the DDNS function. Select your Dynamic DNS provider from the drop down menu. Enter the host name of the DDNS server. Enter your username or e-mail used to connect to the DDNS server. En te r you r pa ss wo rd us[...]

49 D-Link DCS-6111 User Manual Section 3 - Conguration Color: Power Line Frequency: Video Orientation: AGC: Exposure Level: Select either a Color or B/W (black and white, monochrome) video display. Select either 50 or 60Hz. Flip will vertically rotate the video. Mirror w i l l horizontally rotate the video. You may check both options if the came[...]

50 D-Link DCS-6111 User Manual Section 3 - Conguration Enable WDR (Wide Dynamic Range): Switch to B/W (Night Mode): White Balance: Maximum Exposure Time: Brightness: Saturation: Contrast: Overlay Title and Time Stamp on Video: Privacy Mask: Select to enable the WDR function. WDR provides better performance especially when the image contains both[...]

51 D-Link DCS-6111 User Manual Section 3 - Conguration Mode: Frame Size: Maximum frame rate: Video quality: Mute: Select either JPEG or MPEG4 . I n J P E G mode, the video frames are independent. Ho wev er , MP EG4 con sum es muc h les s ne two rk bandwidth than JPEG. Select 176 x 144, 352 x 240 or 640 x 480 pixels for the frame size. We recomme[...]

52 D-Link DCS-6111 User Manual Section 3 - Conguration Set the microphone input gain at either 0dB or 20dB. Note: The higher the decibel number , the louder the sound. Advanced Audio Coding (AAC) is a wide band audio coding algorithm that exploits two primary coding strategies to dramatically reduce the amount of data needed to convey high-quali[...]

53 D-Link DCS-6111 User Manual Section 3 - Conguration Enable motion detection: Window name: Sensitivity: Percentage: New: Save: Check this option to turn on the motion detection feature. Create your own name for the monitored area/ window. It will show at the top of the motion window. Set the measurable difference between two sequential images [...]

54 D-Link DCS-6111 User Manual Section 3 - Conguration 1. Click New to add a new motion detection window. 2. Enter a name in the Window Name eld. 3. Dene the sensitivity to moving objects and the space ratio of all alerted pixels by moving the Sensitivity and Percentage slide bar. 4. Click Save to apply the changes. 5. Select Enable motion[...]

55 D-Link DCS-6111 User Manual Section 3 - Conguration How does motion detection work? There are two parameters for setting the motion detection: Sensitivity and Percentage . In the illustration above, frame A and frame B are two sequential images. Pixel differences between the two frames are detected and highlighted in gray (frame C), and will [...]

56 D-Link DCS-6111 User Manual Section 3 - Conguration Current Server Time: Time Zone: Enable Daylight Saving: Daylight Saving Dates: Automatic Time Conguration: NTP Server: Update Interval: Set the date and time manually: Copy Your Computer’s Time Settings: Displays current time. Select your time zone from the drop-down menu. Select this t[...]

57 D-Link DCS-6111 User Manual Section 3 - Conguration EventSetup There are four sections in Event Setup page. • Event • Server • Media • Recording 1. To add a new item - event, server or media, click Add . A pop-up will appear and update the elds accordingly. 2. To delete the selected item from the pull-down menu of event, server [...]

58 D-Link DCS-6111 User Manual Section 3 - Conguration Application A typical application is that when motion is detected, the DCS-6111 Network Camera sends images to a FTP server or via e-mail as notications. For example, as seen in the illustration below, an event can be triggered by many sources, such as motion detection or external digital[...]

59 D-Link DCS-6111 User Manual Section 3 - Conguration Server Name: Email: FTP: HTTP: Network Storage: Unique name of your server. Se le ct this to ena ble and app ly your ema il acco unt setting for your camera. Select this to access a granted folder on the external FTP server. Select this to use a web server to store the media. Only one networ[...]

60 D-Link DCS-6111 User Manual Section 3 - Conguration Media Name: Snapshot: Source: Send pre-event image(s) [0~7]: Send post-event image(s) [0~7]: File name prex: Add date and time sufx to le name: Video clip: Source: Pre-event recording: Maximum duration: Maximum le size: File name prex: System log: Enter an unique name for medi[...]

61 D-Link DCS-6111 User Manual Section 3 - Conguration Send post-event image (s) [0~7) Specify to capture the number of images after a trigger is activated. A maximum of seven images can be generated. For example: If both the Send pre-event images and Send post-event images are set to seven, a total of 15 images are generated after a trigger is [...]

62 D-Link DCS-6111 User Manual Section 3 - Conguration Maximum duration Specify the maximal recording duration in seconds. You can set up to ten seconds. For example: If the Pre-event recording is set to ve seconds and the Maximum duration is set to ten seconds, the Network Camera continues to record for another four seconds after a trigger i[...]

63 D-Link DCS-6111 User Manual Section 3 - Conguration Event name: Enable this event: Priority: Delay: Trigger: Video motion detection: Periodic: Digital input: System boot: Time: Trigger D/O: Enter a name for the event. Select to activate this event. Set the prior ity for this eve nt. The event with hig her priority will be executed rst. Sel[...]

64 D-Link DCS-6111 User Manual Section 3 - Conguration Recording entry name: Enable this recording: Priority: Source: Recording schedule: Recording settings: Destination: Total cycling recording size Size of each le for recording: File Name Prex: The unique name of the entry. Select this to enable the recording function. Set the priority f[...]

65 D-Link DCS-6111 User Manual Section 3 - Conguration DI and DO: Digital input trigger condition: Digital output: Settings for both Digital input signal and digital output signal can be congured here. Please select High or Low for digital input trigger condition. When an external device is connected to the digital input pins, the state of th[...]

66 D-Link DCS-6111 User Manual Section 3 - Conguration ICR - IR-Cut Removable(ICR) lter is a switch mechanical design of two different sensor lters. It provides the best light conditions both during the day and night. The following options are: ICR Auto: Day Mode: Night Mode: Schedule Mode: Disable IR LED: The Network Camera automatically [...]

67 D-Link DCS-6111 User Manual Section 3 - Conguration Enable HTTPS secure connection: HTTP & HTTPS: HTTPS only: Select to enable a secure HTTPS connection. Select to enable the HTTP and HTTPS serv ice s. By default, this option is enabled. Select this to automatically redirect an HTTP connection to HTTPS . There are three methods to impleme[...]

68 D-Link DCS-6111 User Manual Section 3 - Conguration Method 3. Create certicate request and install: To upload a signed-certificate, ensure to create a certicate request. After creating the request, click Browse to upload the certicate le which has been signed by the third party. Once uploaded, the Certicate Information section [...]

69 D-Link DCS-6111 User Manual Section 3 - Conguration Allow list: Delete allow list: Deny list: Delete deny list: Always allow the IP address to access this device: The list of IP addresses that have the access rights to the camera. Remove the customized setting from the Allow List. The list of IP addresses that have no access right to the came[...]

70 D-Link DCS-6111 User Manual Section 3 - Conguration For example: When the range of allowed list is set from 1.1.1.0 to 192.255.255.255 and the range of denied list is set from 1.1.1.0 to 170.255.255.255, Only users’ IP located between 171.0.0.0 and 192.255.255.255 can access the Network Camera. Alowed List Denied List Single: Network: Range[...]

71 D-Link DCS-6111 User Manual Section 3 - Conguration Maintenance DeviceManagement Admin password setup: Add user account: Username: Password: Privilege: Manage user: Authentication: Camera Name: Modify the password for the administrator’s account. Add a new user account. Enter a username for the new account. Enter a password for the new a[...]

72 D-Link DCS-6111 User Manual Section 3 - Conguration Turn off the LED indicator: Restore: Reboot: Select this option to turn off the LED next to the lens. This will prevent anyone from observing the operation of the network camera. Click the Restore button to reset the camera back to its fact ory def aul t setti ngs . This will rem ove all the[...]

73 D-Link DCS-6111 User Manual Section 3 - Conguration Current rmware version: Current rmware date: File Path: Upload: It will be automatically determined and displayed by the system. It will be automatically determined and displayed by the system. Locate the le (upgraded rmware) on your hard drive using the browse feature. Start upl[...]

74 D-Link DCS-6111 User Manual Section 3 - Conguration Status DeviceInfo This page displays all the details information about your device and network connection.[...]

75 D-Link DCS-6111 User Manual Section 3 - Conguration Enable remote log: Log server settings: IP Address: Port: Save: Current Log: Click to enable this feature so that the camera can send camera log files to a remote server. Congure the settings for the log server. The IP address of the remote server. The port number of the remote log server[...]

76 D-Link DCS-6111 User Manual Section 3 - Conguration Help[...]

77 D-Link DCS-6111 User Manual Section 4 - Frequently Asked Questions FrequentlyAskedQuestions WDRD&NFixedDomeNetworkCameraFeatures 1. What is a WDR D&N Fixed Dome Network Camera? The WDR D&N Fixed Dome Network Camera is a stand-alone system connecting directly to an Ethernet or Fast Ethernet network. The WDR D&a[...]

78 D-Link DCS-6111 User Manual Section 5 - Fixed Dome Day & Night Network Camera With WDR Sensor Installation WDRD&NFixedDomeNetworkCameraInstallation 1. Can the Network Camera be used outdoors? The WDR D&N Fixed Dome Network Camera is not weatherproof. It needs to be equipped with a weatherproof case for outdoor use b[...]

79 D-Link DCS-6111 User Manual Section 5 - Fixed Dome Day & Night Network Camera With WDR Sensor Installation 8. I connected the Network Camera directly to a computer with a cross-over Ethernet cable and received a Windows error upon running the Installation Wizard? • This Windows error will occur if the WDR D&N Fixed Dome Network Camera [...]

80 D-Link DCS-6111 User Manual Appendix A - Networking Basics Networking Basics CheckyourIPaddress After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below. Click on Start[...]

81 D-Link DCS-6111 User Manual Appendix A - Networking Basics StaticallyAssignanIPaddress If you are not using a DHCP capable gateway/access point, or you need to assign a static IP address, please follow the steps below: Step 1 Windows Vista ® - Clic k on Start > Contro l Panel > Networ k and Inter net > Networ k and Sharin g[...]

Appendix B - Reset and Restore 82 D-Link DCS-6111 User Manual Reset and Restore Restoring the factory defaults will result in the loss of any previous settings and will require running the Installation Wizard to return the DCS-6111 to a normal state. Reset button The hidden button in the pinhole beside the Ethernet socket is used to reset the syste[...]

83 D-Link DCS-6111 User Manual Appendix B - External I/O Port ExternalI/OPort DI/DO Diagram Pin 1~4 are used to connect with digital input and digital output devices. Refer to the following illustration for connection method. The DCS-6111 provides a general I/O terminal block with one digital input and one relay switch for device control. The[...]

84 D-Link DCS-6111 User Manual Appendix C - Technical Specications T echnicalSpecications NETWORK PROTOCOL SUPPORT + IPv4, IPv6, TCP/IP, RTSP/ RTP/ RTCP, HTTP, HTTPS, SMTP, FTP, NTP, DNS, DHCP, UPnP, DDNS, PPPoE, IGMP, Samba client, IP Filtering, 3GPP, LLTD BUILT-IN NETWORK INTERFACES + 10/100BASE-TX Ethernet port, RJ45 VIDEO ALGORITHM SUP[...]

85 D-Link DCS-6111 User Manual Appendix C - Technical Specications * HTTPS streaming will reduce the video frame rate automatically. + Real Player 10.5 NETWORK INTERFACE + IEEE 802.3/802.3u 10/100BASE-TX Ethernet port + Supports half/full-duplex operations + Supports 802.3x Flow Control in full-duplex mode + Supports IEEE 802.3af PoE AUDIO + Com[...]