Dacor OBSB162 manual

I n s t a l l a t i o n I n s t r u c t i o n s E p i c u r e ® O u t d o o r G r i l l Models: OB36, OBS36, OB52 OBS52, OBSB162 Part No. 102032 Rev . E TesTed in accordance wiTh The la TesT ediTion of        ?[...]

[...]

1 installation instructions .................................................. 10 Preparing for Installation ................................................ 10 Cabinet Installation ......................................................... 12 Cart Installation .............................................................. 12 Connecting the Gas ....[...]

2 Impor tant Safety Instructions Read the use and care manual completely before using this appliance. Use this appliance only for its intended use as described in the use and care manual. Use it only to cook food. It is not designed for commercial, industrial or laboratory use. If you receive a damaged product, immediately contact your dealer or bu[...]

3 Impor tant Safety Instructions w arninG Keep items that could explode, such as aerosol cans away from the grill and burners. Do not store flammable or explosive materials in adjacent cabinets or areas. Do not use towels or bulky cloth as pot holders. T o avoid the possibility of fire, do not leave the appliance unattended when in use. DO NOT TOUC[...]

4 Impor tant Safety Instructions TO REDUCE THE RISK OF INJUR Y TO PERSONS IN THE EVENT OF A GREASE FIRE: w arninG General Safety Precautions (continued) T o reduce risk of fire, electric shock, serious injury or death when using your appliance, follow basic precautions, including the following: Planning the Installation Product Dimensions 9 1/8&quo[...]

5 9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27 1/8" (689mm) 16" (406mm) Planning the Installation 9 1/8" (232mm) 23 3/4" (603mm) 26 1/2" (673mm) 27 1/8" (689mm) 52" (1321mm) 26" (660mm) Door Depth: 1/4” (6mm) deep return on frame edge Cut-Out for Outdoor Grill 21” (533mm) Width accesso[...]

6 w arninG This installation must conform to local codes or , in the absence of local codes, with either the National Fuel Gas Code, ANSI Z223.1/NFP A 54, Natural Gas and Propane Installation Code, CSA B149.1, or Propane Storage and Handling Code, B149.2. Prevent grill combustion products from being drawn into a building through fresh air inlets: T[...]

7 Planning the Installation Junction Box T rim frame (accessory) 3/4" (19mm) Min. to any material* 10" (254mm) Min. to combustibles 2" (51mm) Min. to non-combustible 1/4" (6mm) 23" (584mm) 24" (610mm) Rotisserie mounting bracket (factory installed) Junction Box T rim frame (accessory) 3/4" (19mm) min. to any mater[...]

8 Planning the Installation 3/8" (10mm)ø Both sides 6" x 7" (152mm x 178mm) Utility Cutout 25" (635mm) 8" (203mm) Min. to combustibles above the countertop surface 1 1/4" (32mm) 12 1/8" (308mm) 2" (51mm) OB(S)36 - 33 1/2" (851mm) OB(S)52 - 49 1/2" (1257mm) 6" x 6" (152mm x 152mm) Utility [...]

9 Location Planning - Car t Installations Above the cooking surface, both sides: 3” (76mm) Min. to non-combustibles 10" (254mm) Min. to combustibles Above cooking surface, behind unit: 3” (76mm) Min. to non-combustibles 10" (254mm) Min. to combustibles Planning the Installation Maintain all minimum clearances shown between the applian[...]

10 Par ts List Models oB36, oBs36, oB52 & oBs52: A Drip tray G Rotisserie rod and forks B Smoker box H Rotisserie motor C W arming rack J Light lens prystick D Regulator assembly Match holder E Grills Cleaning cream F Flame spreaders Models oB52, oBs52 & oBsB162 K Side burner grate M Side burner heads (2) L Side burner cover N Side burner c[...]

1 1 D Installation Instructions E F G H P J N K L M whole house natural Gas or l P regulator lP cylinder regulator oBs162, oB36, oBs36 (Pn 72310) lP cylinder regulator oB52, oBs52 (Pn 101578) D D[...]

12 Installation Instructions Cabinet Installation w arninG T o avoid an explosion hazard, do not connect the cart or appliance(s) to electrical power until after the gas supply system has been checked for leaks. iMPorT anT T o prevent damage to the gas regulator , install the regulator only after the appliance is mounted in its permanent position i[...]

13 Optional Side Shelf Installation Install the front mounting bracket for the right side shelf. Use two (2) of the provided button head fasteners and two (2) lock washers. T ighten into place using a 5/32” allen wrench. 1. Installation Instructions Bracket Lock W asher Button Head Fastener Slide the slot on the inside of the shelf over the pin o[...]

14 Connecting the Gas Gas Connection - Natural Gas noTes Units equipped for use with natural gas ship with a regulator assembly with 3/4” pipe attached and an additional 3/4” nipple. The regulator assembly is also equipped with a 3/4” to 1/2” reducer on the inlet side. • • Connect the factory supplied regulator assembly to the gas inlet[...]

15 Put the burner heads on to the burner bases. Line up the slots on each head with the pins on the base so that it lies flat. Put the burner caps on top of the burner heads. Line up the slots on each cap with the pins on the base so that it lies flat. Put the grate over the top of the side burner . Line up the legs with the dimples on the top of t[...]

16 Installation Instructions Final Assembly and T est (cont.) LP Cylinder Installation - Some Models w arninG The largest recommended LP cylinder size for the rollout tank shelf on the cart is five gallons. A five gallon portable liquid propane cylinder should be approximately 12 inches (305mm) in diameter and 18 inches (457mm) high,. It must be co[...]

17 Installation Instructions With the tank shelf open, connect the power cord from the outdoor grill and the warming oven (if equipped with one) to the electrical outlet on the back panel inside the cart. Connect the rotisserie motor power cord to the electrical outlet on the back side of the cart. Power Connection - Cabinet Installations Connect t[...]

Copyright © 2007 by Dacor Inc. All rights reserved. Web Site: www .Dacor.com Phone: (800) 793-0093[...]