Dell B-FCX manual

53-1 002267-0 1 18 M ar ch 2 0 11 P o werConnect B-FCX Switch Hardware Installation Guide[...]

Information in this document is subject to change without notice. © 20 11 Dell Inc. All rights reser ved. Repr o duction of these materials in any manner wha tsoever withou t the written permission of Dell Inc. is strictly forbidden. T rademarks used in this text: Dell , the DELL logo, , Dell OpenManage , a nd Pow erConn ect are trademarks of De l[...]

PowerConnect B-FCX Switch Hardware Installation Guide iii 53-1002267-01 Contents About This Document Audience . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Suppor ted har dware and software . . . . . . . . . . . . . . . . . . . . . . . . . . vii Document conv entions . . . . . . . . . . . . . . . [...]

iv PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Installing or replacing f an trays on Po werConnect B-FCX62 4 and Po werConnect B-FCX648 devices . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Installing an optional module on Pow erConnect B-FCX62 4s or Po werConnect B-FCX648s devices . . . . . . . . . . . . . . . . [...]

PowerConnect B-FCX Switch Hardware Installation Guide v 53-1002267-01 Chapter 5 Hardware Specifications Hardw are specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 7 Physical dimensions and w eight . . . . . . . . . . . . . . . . . . . . . . . . . 5 7 Envir onmental considerations . . . . . . . . . . . . . . . .[...]

vi PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01[...]

PowerConnect B-FCX Switch Hardware Installation Guide vii 53-1002267-01 About This Document Audience This document is designed f or system administ rators with a working kno wledge of Lay er 2 and Lay er 3 switching and routing. If yo u a re usi ng a De ll Layer 3 Sw it ch , you sh oul d be familiar with the f ollow ing prot ocols if applicable to [...]

viii PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 For readability , command names in the narrative por tions of this guide are presented in bold: for exa mp le , show version . In actual examples, command lettercase is of ten all lo wercase. Otherwise, this manual specifically notes those cases in which a command is case sens[...]

PowerConnect B-FCX Switch Hardware Installation Guide ix 53-1002267-01 NOTE For the latest edition of these documents, which co ntain the most up-to-dat e information, ref er to Product Manuals at support.dell.com. Getting technical help or reporting errors Dell is committed to en suring that your in vestment in our products remains cost-ef fectiv [...]

x PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01[...]

PowerConnect B-FCX Switch Hardware Installation Guide 1 53-1002267-01 Chapter 1 Product Overview Hardware features The f ollowing hardware platf orms are supported by this release of this guide: • The Po werConnect B-FCX62 4s stackable switch has twenty 1 0/1 00/1000 Mbps RJ45 ports plus four Combo ports, which include four 1 0 /1 00/1000 Mbps RJ[...]

2 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware features 1 • The Po werConnect B-FCX648-I switch has f or ty fo ur 1 0/100/1 000 Mbps RJ 45 por ts plus f our Combo 1 Gbps por ts. The de vice has two manageme nt int er faces on the front panel, a serial por t ( Console ) and an RJ45 por t ( Out-of-band Management Int[...]

PowerConnect B-FCX Switch Hardware Installation Guide 3 53-1002267-01 Hardware features 1 FIGURE 5 PowerConnect B-FC X648-E an d Powe rConnect B-FCX648-I front panel FIGURE 6 PowerConnect B-FCX62 4-E, PowerConnect B-FCX62 4-I, PowerConnect B-FCX648-E , Powe r Co nn ec t B -F CX 6 48 -I re ar pa n el s CAUTION For the P owerConnect B-FCX62 4-E, Powe[...]

4 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware features 1 • Out-of-band RJ45 management Interface Serial management interface (DB9 Console port) The serial management interface allows y ou t o configure and manage the device using a third-par ty t erminal emu lation appl ication on a directly -connected PC. A strai[...]

PowerConnect B-FCX Switch Hardware Installation Guide 5 53-1002267-01 Hardware features 1 NOTE Po werConnect B-FCX62 4 and Pow erConnect B-FCX648 devices do no t ship with SFP por ts. Y ou must install the optional SFP or SFP+ module f or SFP suppor t. Slot designations Ta b l e 2 lists the slot designations for P owerConnect B-FCX models. TA B L E[...]

6 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware features 1 SFP interfaces Ta b l e 3 describes the network inte r faces suppo rted on P owerConnect B-FCX de vices. Optional two-port 10 Gb ps XFP uplink module The Po werConnect B-FCX62 4s and PowerConnect B-FCX648 s devices include a slot on the front panel for a two-p[...]

PowerConnect B-FCX Switch Hardware Installation Guide 7 53-1002267-01 Hardware features 1 CAUTION The optional 1 0Gbps XFP module is not hot-swappable. FIGURE 7 T wo-por t 10 Gbps XFP module Optional Four-port 1 Gbps SF P and 10 Gbps SFP+ modules Th e PowerC o nne ct B-F CX6 2 4 an d Powe rCo nn ect B-FCX648 de vices include a slot on the front pan[...]

8 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware features 1 FIGURE 9 Four-p or t 10 Gbps SFP+ module NOTE The two le f t por ts on the Four -por t 1 0Gbps SFP+ module do not pass regular Eth ernet traf fic by default. The stac k disable CLI command must be entered at the global level and the stack disable CLI command m[...]

PowerConnect B-FCX Switch Hardware Installation Guide 9 53-1002267-01 Hardware features 1 FIGURE 1 0 Por t s ta tu s LE Ds FIGURE 1 1 System status LEDs 1, 2 Por t statu s LEDs TA B L E 7 Por t st at us LED s LED Condition Status Ethernet (1~2 4/48) Link or Activi ty or Speed On/Flashing Green The port has established a valid link at 1 000 Mbps. Fl[...]

10 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware features 1 FIGURE 12 Powe r s t at us LE D s TA B L E 8 System status LEDs LED Condition Status PS1 PS2 (Power Supply Status) Green Po wer supply is opera ting normally . Amber Po wer supply fault . Off Po wer off or failure. Diag (Diagnosti c) Flashing Green System sel[...]

PowerConnect B-FCX Switch Hardware Installation Guide 11 53-1002267-01 Hardware features 1 NOTE Both “ AC OK” and “DC OK” LEDs must be green for the de vice to function normally . Port, system, and powe r status LEDs for PowerConnect B-FCX624 and PowerConnect B-FCX648 Po werConnect B-FCX switches include a display pa nel f or key syst em a [...]

12 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware features 1 FIGURE 1 4 System status LEDs SFP (1F~4F) Link or Activi ty On/Flashing Green The SFP por t has established a valid 100/1 000 Mbps link. Flashing indicates the po r t is trans mitting and receiving user packet s. Off A link is not establis hed with a remote p[...]

PowerConnect B-FCX Switch Hardware Installation Guide 13 53-1002267-01 Hardware features 1 FIGURE 1 5 Powe r s t at us L ED s NOTE Both “ AC OK” and “DC OK” LEDs must be green for the de vice to function normally . Power supplies The device has two po wer receptacles on the rear panel. Each de vice ships wit h one pow er supply installed. P[...]

14 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware features 1 Each power supply has one standard po wer recept acle for the A C pow er cable, and AC and DC status LEDs f or easy moni toring and troubleshooting. A secondar y pow er supply can be installed to pr ovide back up power in case of a f ailure and for load-balan[...]

PowerConnect B-FCX Switch Hardware Installation Guide 15 53-1002267-01 Chapter 2 Installing the PowerConnect B-FCX Switch CAUTION The procedures in this manual are int e nded f or qualified ser vice personnel. CAUTION Before beginning the installa tion, see the precautions in “Po wer precautions” on pag e 1 7 . Unpacking the device Pow erCon ne[...]

16 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Installation t asks 2 Installation tasks Follo w t he steps listed in Ta b l e 1 5 to install your device. Details f or each of these steps are pro vided on the pages indicated. Installation precautions Follow al l precautions when installing a Dell device. TA B L E 1 5 Installa[...]

PowerConnect B-FCX Switch Hardware Installation Guide 17 53-1002267-01 Installation precautions 2 General precautions CAUTION All fiber -optic inter faces use Class 1 lasers. CAUTION Do not install the de vice in an envir onment where the operating ambient temperature might ex ceed 40  C (1 04  F). CAUTION Make sure the air flo w around the f[...]

18 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Preparing the installation site 2 CAUTION Ensure that the device does not o verload the po wer circuits, wiring, and ov er-current pr otection. T o determine the possibility of o verloading the su pply circuits, add the ampere ( amp) ratings of all devices installed on the same [...]

PowerConnect B-FCX Switch Hardware Installation Guide 19 53-1002267-01 Preparing the installation site 2 • Allow f or the unit to be connected t o a separate gr ounded power outlet that provides 1 1 0 to 2 40 V AC, 50 to 60 Hz, is within 2 m (6.6 f eet) of each de vice and is pow ered from an independent circuit break er . As with an y eq uipment[...]

20 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Preparing the installation site 2 Rack mount installation NOTE Y ou need a #2 Phillips screwdriver f or installation. NOTE For additional support for the stack of switches, re f er to the Dell 1U shelf, Dell part number-G1 18R, which is ordered separat ely . Before mounting the [...]

PowerConnect B-FCX Switch Hardware Installation Guide 21 53-1002267-01 Preparing the installation site 2 FIGURE 20 Attaching the brackets for P owerConnect B-FCX62 4 and PowerConnect B-FCX648 3. Install re tainer nuts into the non-threaded holes. And use 10-32 screws to f asten brack ets into the rack. Attach the d evice in the rack as illustrat ed[...]

22 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Preparing the installation site 2 In a linear stack topology there is a single stac k cable co nnection between each switch that carries two-wa y communications across th e stack. In ring stack topolo gy , an extra cable is connect ed between the top and bott om switches forming[...]

PowerConnect B-FCX Switch Hardware Installation Guide 23 53-1002267-01 Preparing the installation site 2 5. One de vice in the stack will operate as the Active Controller , one will o perate as Standb y Controller , with the rest of the units operating as stack members. F or information about how t o configure y our stack, see the Pow erConnect B-F[...]

24 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Powering on the system 2 FIGURE 2 4 Connecti ng Powe rConnect B-FCX62 4-E and P owerCon nect B-FCX648-E de vices in a ring stack topology FIGURE 25 Connecting PowerCo nnect B-FCX62 4-E and P owerConnec t B-FCX648-E de vices in a mixed stack with an PowerConnect B-FCX624s device [...]

PowerConnect B-FCX Switch Hardware Installation Guide 25 53-1002267-01 Attaching a PC or terminal 2 NOTE T o turn the system of f, simply unplug the po wer cable or cables. NOTE The socket should be installed near the equipment and should be easily accessible . NOTE If the outlet is not rated 1 15/120V , stop and get the appropriat e cable for the [...]

26 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Installing and replacing a power supply unit 2 FIGURE 26 Serial Port (DB-9 DTE) Pin-Out Most PC serial por ts also require a cable with a f emale DB-9 connector . T e rminal connections will vary , requiring either a DB-9 or DB-25 connect or , male or f emale. Serial cable optio[...]

PowerConnect B-FCX Switch Hardware Installation Guide 27 53-1002267-01 Installing and replacing a power supply unit 2 FIGURE 2 7 Installing a power supply unit Use the f ollowing steps to in stall a pow er supply unit in the switch. 1. R emov e the blank metal plat e (or a previously installed PSU) from the appr opriate slot b y removing the tw o s[...]

28 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Installing or replacing fan tray s on PowerConne ct B-FCX624s and PowerConnect B-FCX648s devices 2 Installing or replacing fan trays on PowerConnect B-FCX624s and PowerConnect B-FCX648s devices FIGURE 28 Installing a fan tra y on a PowerConnect B-FCX62 4s or Powe rCon nect B-FCX[...]

PowerConnect B-FCX Switch Hardware Installation Guide 29 53-1002267-01 Installing or replacing fan trays on PowerCo nnect B-FCX624 and PowerC onnect B-FCX648 devices 2 FIGURE 29 Installing a fan tra y on a PowerConnect B-FCX62 4-E, PowerConnect B-FCX62 4-I, Powe r Co nn ec t B -F CX 6 48 -E , a nd Po werConnect B-FCX648-I device Fan trays are hot-s[...]

30 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Installing an optional mo dule on PowerConnect B-FCX624s or PowerCon nect B-FCX648s devices 2 Installing an optional module on PowerConnect B-FCX624s or PowerConnect B-FCX648s devices FIGURE 30 Installing an optional module Po werConnect B-FCX62 4s and Po werC onnect B-FCX648s s[...]

PowerConnect B-FCX Switch Hardware Installation Guide 31 53-1002267-01 Installing an optional mo dule in PowerConnect B-FCX624 and PowerConnect B-FCX648 devices 2 Installing an optional module in PowerConnect B-FCX624 and PowerConnect B-FCX648 devices Po werConnect B-FCX62 4 and Pow erConnect B-FCX 648 switches suppor t an optional four -por t 1 Gb[...]

32 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Installing an optional mo dule in PowerConnect B-FCX624 and PowerConnect B -FCX648 devices 2 CAUTION If you do not install a modu le in a slot , you must keep the slot panel in place. If you run the device with an uncov ered slot, the system will o verheat.[...]

PowerConnect B-FCX Switch Hardware Installation Guide 33 53-1002267-01 Chapter 3 Checking Network Devices and Testing Connectivity CAUTION The procedures in this manual ar e for qualified service personnel. Assigning permanent passwords By default, the CLI is not prot ected b y passwords. T o secure CLI access, Dell str ongly recommends assigning p[...]

34 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Assigning permanent passwords 3 Setting passwords 1. A t the opening CLI prompt, e nter the follo wing co mmand to change t o the Privileged level of the EXEC mode: PowerConnect> enable 2. A ccess the CONFIG lev el of the CLI by ent ering the follo wing command: PowerConnect#[...]

PowerConnect B-FCX Switch Hardware Installation Guide 35 53-1002267-01 Configuring I P addresses 3 Configuring IP addresses Y ou must configure at least one IP address using the seri al connection t o the CLI bef ore you can manage the syst em using the other manageme nt inter faces. Dell devices support both classical IP network mask s (Class A, B[...]

36 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Configuring IP addresses 3 Syntax: [ no ] ip address < ip-addr > < ip-mask > or Syntax: [ no ] ip address < ip-addr >/< mask -bits > Syntax: ip default-gate way < ip-a ddr > Devices running Layer 3 software Bef ore attaching equipment t o a Layer 3 [...]

PowerConnect B-FCX Switch Hardware Installation Guide 37 53-1002267-01 Configuring I P addresses 3 Use the secondary parameter if y ou have already configured an IP address within the same subnet on the inter face. Configuring IP paramete rs for devices running Layer 3 software This section describes how to configure IP pa rameters f or devices run[...]

38 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Configuring IP addresses 3 Y ou can add up to 2 4 IP addresses to each loopback int er face. NOTE If you configure the Dellswitch to use a loopback int er face to communicate with a BGP4 neighbor , you must also configure a loopback interface on th e neig hbor and configure the [...]

PowerConnect B-FCX Switch Hardware Installation Guide 39 53-1002267-01 Configuring I P addresses 3 T o delete all IP addresses from an in te r f a ce , e n ter th e fol low i ng co m ma n d: PowerConnect(config-if-1/1/1)# no ip address * Syntax: no ip address < ip-addr > | * Connecting network devices Dell devices support connections to other[...]

40 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Configuring IP addresses 3 FIGURE 33 Straight-through cable Connecting to workstations, servers, or routers Straight-through UTP cabling is required f or direct UTP attachment to w orkstations, ser vers, or rout ers using network interface cards (NICs). Fiber cabling is required[...]

PowerConnect B-FCX Switch Hardware Installation Guide 41 53-1002267-01 Configuring I P addresses 3 Installing a transceiver Y ou can install a new transceiver in an XFP , SFP , or SFP+ slot wh ile the device is po wered on and running. While installing a transceiver , wear an ESD wrist st rap with a plug f or connecti on to a metal surface. NOTE Fo[...]

42 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Configuring IP addresses 3 FIGURE 34 Installing a t ransceiver in PowerConnect B-FCX624s and PowerConnect B-FCX648s devices FIGURE 35 Installing a transceiver in P owerConnect B-FCX624 and Powe r Co nn ec t B- FC X6 48 Cabling a fiber optic transceiver Use the f ollowing steps t[...]

PowerConnect B-FCX Switch Hardware Installation Guide 43 53-1002267-01 Testing connectivity 3 Cleaning the fibe r optic connectors T o av oid problems with the connection between the fibe r optic transceiver (SFP , SFP+, or mini-GBIC) and the fiber cable connectors. When not using an SFP connect or , make sure t o keep the pr otectiv e covering in [...]

44 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Testing connectivity 3 TA B L E 1 9 Netw ork connection-related LED stat es LED Desired State Meaning Abnormal State Meaning or Action Ethernet (1-2 4/48) Link or Activity or Speed On or Blinking (Green o r Amber) A link is esta blished with the remote port and user packet s are[...]

PowerConnect B-FCX Switch Hardware Installation Guide 45 53-1002267-01 Troubleshooting netw ork connections 3 If a problem persists after taking thes e actions, contact Dell T e chnical Suppor t. Tracing a route T o determine the path through whic h a Dell de vice can reach another device, ent er a command similar to the following at any le vel of [...]

46 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Troubleshooting network connections 3 • V erify that you hav e used the correct cable type fo r the connection: - For twist ed-pair connections to an en d node, use straight-thr ough cabling. - For fiber optic connections, verify that the transmit por t on the device is connec[...]

PowerConnect B-FCX Switch Hardware Installation Guide 47 53-1002267-01 Troubleshooting netw ork connections 3 The output from this command appears below . Syntax: show cable-diag tdr < port-num > Ta b l e 2 0 defines the fields shown in this output. Digital optical monitoring Y ou can configure your de vice to monitor optical tr ansceivers in[...]

48 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Troubleshooting network connections 3[...]

PowerConnect B-FCX Switch Hardware Installation Guide 49 53-1002267-01 Chapter 4 Managing the PowerConnect B-FCX Hardware CAUTION The procedures in this manual ar e for qualified service personnel. Managing temperature settings This section describes how t o display t emperature settings on the device and how t o change the tem perature warning and[...]

50 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Managing temperature settings 4 Warning level.......: 80.0 deg-C Shutdown level......: 90.0 deg-C CPU Temperature Readings: Current temperature : 49.0 deg-C Boot Prom MAC : 0012.f2d4.69c0 Management MAC: 0012.f2d4.69c0 Syntax: show chassis Displaying S yslog mess ages for temper[...]

PowerConnect B-FCX Switch Hardware Installation Guide 51 53-1002267-01 Managing temperature settings 4 PowerConnect# temperature temperature temperature sensor commands PowerConnect# temperature warning warning Temperature at which the module sends a warning PowerConnect# temperature warning DECIMAL Stack Number PowerConnect# temperature warning 1 [...]

52 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Managing temperature settings 4 T o change the temperature at which the Po werCo nnect B-FCX sends a warning, you must change the fan speed thresho ld. T o view the current temperature thresholds, ent er the show chassis command: PowerConnect# show chassis The stack unit 1 chass[...]

PowerConnect B-FCX Switch Hardware Installation Guide 53 53-1002267-01 Displaying PowerConne ct B- FCX CPU usage 4 Changing the temperat ure polling interval The software reads the temperature sensor and polls other hardw are sensors according to the value set f or the poll time, which is 60 seconds by default. Y ou can change the poll time using t[...]

54 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware mainte nance schedule 4 Hardware maintenance schedule PowerC on nec t B -FC X s wit ch hardw are components require minimal maint enance. Dell recommends cleaning the fiber -opti c connect ors on a fiber-optic po r t and the connected fiber cable each time you disco n n[...]

PowerConnect B-FCX Switch Hardware Installation Guide 55 53-1002267-01 Replacing a copper or fiber optic module 4 FIGURE 36 Unlocking the bail latch FIGURE 3 7 Remo ving the bail latch NOTE The bail latch may be attached to either the top or the bottom of the mini-GBIC. 4. Grasp the bail latch and pull the copper or f iber optic module out of the p[...]

56 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Replacing a copper or fiber optic module 4[...]

PowerConnect B-FCX Switch Hardware Installation Guide 57 53-1002267-01 Chapter 5 Hardware Specifications Hardware specifications This chapter pr ovides the har dware specifications f or Pow erConnect B-FCX devices. Physical dimensions and weight Ta b l e 2 1 lists the physical dimensions and w eig ht for the P owerConnect B-FCX de vices. Environmen[...]

58 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware specifications 5 Storage environment Ta b l e 2 3 provides th e storage envir onment specifications. Cooling system and fans The fans cool the CPU , main memor y , and voltag e regulato r s. For the P owerConnect B-FCX62 4s and Po werConnect B-FCX648s switches, the f an[...]

PowerConnect B-FCX Switch Hardware Installation Guide 59 53-1002267-01 Hardware specifications 5 FIGURE 39 Pow er Co nn ec t B -F C X6 24s a nd Pow er Co n ne ct B- FC X6 4 8s dev ic e air fl ow FIGURE 40 Pow er Co nn ec t B -F C X6 24-E an d Powe rC on n ec t B -F CX 64 8 -E dev i ce ai r fl ow 1 2 1 Air Inflow 2 Air outlet 1 Air Inflow 2 Air outl[...]

60 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware specifications 5 FIGURE 4 1 Powe r Co nn ec t B -F CX 6 24-I an d Po we rC on n ec t B -F CX 64 8 -I d ev ic e a ir fl ow For a complet e list of regulator y compliances refer to “Regulatory compliance” on page 69. 1 Air Inflow 2 Air outlet D i a g R e s e t P S 12 [...]

PowerConnect B-FCX Switch Hardware Installation Guide 61 53-1002267-01 Hardware specifications 5 Pinouts and signalling This section describes the pinout diagrams f or the DB-9 connector and RJ45 por t jacks. Serial (Console) port pinouts The Console por t is a st andard male DB -9 connect or , as shown in Figure 42. FIGURE 42 Serial port pinouts M[...]

62 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware specifications 5 FIGURE 44 Pin as signment and signalli ng for 10 /100BaseTX and 1 000BaseT ports Cable specifications Ta b l e 24 lists the specifications f o r the cables used with the 1 0/100 Etherne t por ts. For information about supported transceivers, see Ta b l [...]

PowerConnect B-FCX Switch Hardware Installation Guide 63 53-1002267-01 Hardware specifications 5 Power cords All de vices ship with US-compati ble power cor ds un less otherw ise specified at the time of or der . United Kingdom- and European-com pati ble power cor ds are also a vailable. AC power supply specifications All devices ship with one remo[...]

64 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Hardware specifications 5[...]

PowerConnect B-FCX Switch Hardware Installation Guide 65 53-1002267-01 Chapter 6 Troubleshooting Diagnosing switch indicators Power and cooling problems If the pow er indicator does not turn on when the po wer cord is plugged in, you ma y have a pr obl em with the pow er outlet, pow er cord, or internal po we r supply . Howev er , if the unit power[...]

66 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Diagnosing switch indicators 6 In-band access Y ou can access the management agent in the swit ch from an ywhere within the attached network using T elnet, a Web bro wse r , or other network management sof tware. How ever , you must f irst configu re the switch with a valid IP a[...]

PowerConnect B-FCX Switch Hardware Installation Guide 67 53-1002267-01 Appendix A Regulatory Statements USA (FCC CFR 47 Part 15 Warning) This equipment has been t ested and found t o comply with the limits f or a Class A digital device pursuant to P ar t 15 of the FCC Rules. These limi ts are designed to pr ovide reasonable pr otection against harm[...]

68 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Japan power cord A English translation of above statement This is Class A product based on the standar d of the V o luntar y Control Council F or Inter ference b y Information T echnol ogy Equipment (VCCI). If this equipment is used in a domestic en vironment, radio disturbance [...]

PowerConnect B-FCX Switch Hardware Installation Guide 69 53-1002267-01 Regulatory compliance A English translation of above statement Cer tificate of Conformity in "Certification System in the field of telecommunications" # ОС -2- СПД -0560, validity fr om the 29 of October 2009 to the 29 of Oct ober 20 12. Regulatory compliance Ta b[...]

70 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Regulatory compliance A[...]

PowerConnect B-FCX Switch Hardware Installation Guide 71 53-1002267-01 Appendix B Cautions and Danger Notices Cautions A caution calls your att ention to a po ssible hazard that can damage equipment. “Vorsicht” weist auf die Gefahr einer mö glichen Beschädigung des Gerätes in. Une mise en garde attire v otre attention su r un risque possible[...]

72 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Cautions B CAUTION Ensure that the de vice does not o verload the p ower cir cuits, wiring, and o ver-cu rrent prot ection. T o determine the possibility of o verloading the sup ply circuits, add the am pere (amp) ratings of all devices installed on the same circ uit as the devi[...]

PowerConnect B-FCX Switch Hardware Installation Guide 73 53-1002267-01 Danger notice s B Danger notices A danger notification calls your attention t o a po ssible hazard that can cause injury or death. The follo wing are the warnings used in this manual. "Gefahr" w eist auf eine mögliche Gefähr dung hin, die zu V erletz ungen oder T od [...]

74 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Danger notices B Una señal de peligro le llama la at enció n sobr e cualquier posible peligro que pue da ocasionar daños personales o la muerte. A continuación se dan las adv er tencias utilizadas en est e manual. DANGER The procedures in th is manual are for qualifie d ser [...]

PowerConnect B-FCX Switch Hardware Installation Guide 75 53-1002267-01 Danger notice s B DANGER Disconnect the po wer cord fr om all pow er so urces t o completely remo ve power from the device. GEFAHR Ziehen Sie das Str omkabel aus allen Str omquellen, um sicherzust ellen, dass dem Gerät kein Strom zugef ühr t wird. DANGER Débranchez le cordon [...]

76 PowerConnect B-FCX Switch Hardware Installation Guide 53-1002267-01 Danger notices B[...]