DMP Electronics SCS-1R manual

Inst alla tIon GuIde sCs-1R seCuRIty ContRol ReCeIveR DMP Receiver Help Line T echnical Service 1-888-436-7832 International 1-417-831-9362 After hours receiver emer gencies 1-417-831-2866[...]

Security Control Receiver Model SCS-1R Installation Guide INDUSTRY CANADA NOTICE This Class A digital apparatus complies with Canadian ICES-003. © 2009 Digital Monitoring Products, Inc. Information furnished b y DMP is believed to be accur ate and reliable. This information is subject to change without notice.[...]

SCS-1R Installation Guide Digital Monitoring Products i t able of Contents Operator’s Quick Reference Acknowledging an Alarm Signal .............................................. 1 LED Indicators ...................................................................... 1 System Overview Description ...................................................[...]

Digital Monitoring Products SCS-1R Installation Guide ii t able of Contents Model SCS-100 Line Card Description ........................................................................... 9 T ransmit Level ....................................................................... 9 Echo Cancel Off ......................................................[...]

SCS-1R Installation Guide Digital Monitoring Products iii t able of Contents LCD Membrane Keypad Conguratio n Internal Speaker Oper ation ...................................................17 LCD Backlighting .................................................................. 17 Display Options ....................................................[...]

SCS-1R Installation Guide Digital Monitoring Products 1 IntRoduCtIon Operator’s Quick Reference This section explains basic operation for the operator . Acknowledging an Alarm Signal P ress the key labeled ACK, or any top row Select key , to acknowledge an alarm. When the SCS-1R is in normal mode, the alarm message displays in the LCD display . I[...]

Digital Monitoring Products SCS-1R Installation Guide 2 IntRoduCtIon System Overview Description The SCS-1R Security Control R eceiver system from DMP is a full featured digital dialer and data network capable alarm receiver . The receiver provides a 32-character LCD display for viewing incoming messages and a built-in membrane keypad for acknowled[...]

SCS-1R Installation Guide Digital Monitoring Products 3 IntRoduCtIon System Block Diagram Line 1 Line 2 Line 3 Line 4 Line 5 Cooling Fa n Model SCS-130 Tr ansformer Card 120 V AC Input Modem Rack Backplane Model SCS-208 Power Cable Model SCS-120 Multibus Power Supply Card Multibus Backplane Model SCS-204 Host Cable J1 J2 J3 Listed Printer or Listed[...]

Digital Monitoring Products SCS-1R Installation Guide 4 IntRoduCtIon Installation Checklist R efer to the Hardware Description section of this guide for installation, setup, and operating information. SCS-1R Faceplate T o lower the SCS-1R faceplate, turn the two screws located in the top corners of the SCS-1R. The front of the SCS-1R opens on a hin[...]

SCS-1R Installation Guide Digital Monitoring Products 5 Inst alla tIon Model SCS-1R Security Control Receiver Description The DMP SCS-1R R eceiver ships from the factory with all of the necessary system components to provide two Digital Dialer lines and one line of Data Network receiving capability . This package can be expanded to include a maximu[...]

Digital Monitoring Products SCS-1R Installation Guide 6 Inst alla tIon Model SCS-RACK System Enclosure Description The SCS-RACK houses the receiver processor , power supply , line cards, and associated cables. The enclosure measures 8.75” high, 19” wide, and 12” deep. Modem Rack The SCS-RACK top portion holds the modem rack, which connects th[...]

SCS-1R Installation Guide Digital Monitoring Products 7 Inst alla tIon Model SCS-150 Receiver Processor Board Description The SCS-150 is the main system processor for the SCS-1R Security Control R eceiver and controls the line cards, the LCD display , the printer (if used), and data output to a host automation system. The SCS-150 contains the softw[...]

Digital Monitoring Products SCS-1R Installation Guide 8 Inst alla tIon Before changing the the dip switch settings on the SCS-150 board, rst power down the SCS-1R receiver and remove the processor board. After setting the dip switches, plug the SCS-150 board back into the receiver and power up. Reset Programming To Factory Defaults R eturn the r[...]

SCS-1R Installation Guide Digital Monitoring Products 9 Inst alla tIon Model SCS-100 Line Card Description The SCS-100 provides for one incoming line of digital dialer (DD) communication to DMP Command P rocessor™ panels. Each line card includes one RJ11X cable for phone line connection from a customer supplied RJ11X connection block. Transmit Le[...]

Digital Monitoring Products SCS-1R Installation Guide 10 Inst alla tIon Model SCS-101 Network Interface Card Description The SCS-101 Network Interface Card provides for a connection from a digital data network to a port on the SCS-1R R eceiver . Each card includes one eight-pin modular connector for digital data network connection. This allows the [...]

SCS-1R Installation Guide Digital Monitoring Products 11 Inst alla tIon Model SCS-110 Modem Power Supply Card Description The SCS-110 provides power to a maximum of ve line cards. P ower is supplied through the modem rack backplane connectors without additional cabling. The SCS-110 also provides LCD and keypad connection, UPS system status, and [...]

Digital Monitoring Products SCS-1R Installation Guide 12 Inst alla tIon Model SCS-120 Multibus Power Supply Card Description The SCS-120 provides power to the SCS-150 through the multibus backplane. The SCS-120 also monitors the SCS-150 condition, the SCS-110 Modem P ower Supply Card voltage output, and its own internal voltages. Installing the SCS[...]

SCS-1R Installation Guide Digital Monitoring Products 13 Inst alla tIon Model SCS-130 Transformer Card Description The SCS-130 provides power to the SCS-110 Modem P ower Supply Card and the SCS-120 Multibus P ower Supply Card. T wo terminals are provided for connecting 120 V AC to the system. A power cord is provided for connecting the multibus rac[...]

Digital Monitoring Products SCS-1R Installation Guide 14 Inst alla tIon Model SCS-208 Power Cable Description The SCS-208 is a 2-foot cable that connects the different system voltages between the SCS-130 T ransformer Card J3 and SCS-120 Multibus P ower Supply Card J3. Installation The SCS-208 cable can be used in either direction, but is polarized [...]

SCS-1R Installation Guide Digital Monitoring Products 15 Inst alla tIon ULC Installation Recommendations 1. In order to give the digital alarm communicator transmitter the ability to disconnect an incoming call to the protected premises, telephone service should be of the type that provides for timed release disconnect. 2. Network access and domain[...]

Digital Monitoring Products SCS-1R Installation Guide 16 opeRa t oR’s GuIde Using the LCD Membrane Keypad Special Keys COMMAND Key The COMMAND key allows you to go forward through the conguration menu and each conguration step (or prompt). As you go through programming, the keypad display shows any current programming already stored in the [...]

SCS-1R Installation Guide Digital Monitoring Products 17 opeRa t oR’s GuIde LCD Membrane Keypad Conguration Internal Speaker Operation The LCD Membrane K eypad speaker emits standard tones for key presses and alerts. LCD Backlighting The LCD backlighting turns on every time a key is pressed or the speaker sounds. The backlighting dims to mediu[...]

Digital Monitoring Products SCS-1R Installation Guide 18 opeRa t oR’s GuIde Keypad Options KPD KPD OPT DIAG STOP Keypad Options (KPD OPT) T o program keypad options, press the left Select key under KPD OPT . The display changes to CURRENT KEYP AD ADDRESS: # #. CURRENT KEYPAD ADDRESS: 01 Current Keypad Address The Membrane K eypad must be set to k[...]

SCS-1R Installation Guide Digital Monitoring Products 19 opeRa t oR’s GuIde Status Displays and SCS-1R Programming Receiver Startup Display When the SCS-1R powers up, the display shows the software version and date of version release. Time Display During normal operation the display shows the current time. P ress the Command button to enter the O[...]

Digital Monitoring Products SCS-1R Installation Guide 20 opeRa t oR’s GuIde Programming Through Remote Link P rogramming of the SCS-150 can be performed using R emote Link version 1.47 or higher . Connect the computer with R emote Link installed to the 25-pin connector Auxiliary P ort on the back of the SCS-1R R eceiver using an SCS-204 cable. No[...]

SCS-1R Installation Guide Digital Monitoring Products 21 opeRa t oR’s GuIde CHANGE REC KEY SURE? YES NO Change Receiver Key After entering the desired R eceiver K ey and pressing COMMAND, the SURE? YES NO prompt displays. P ress the Select key under YES to keep the new key , or under NO to use the previously stored key . RECEIVER KEY CHANGED Rece[...]

Digital Monitoring Products SCS-1R Installation Guide 22 opeRa t oR’s GuIde Host Automation The SCS-1R Host Automation programming section allows adjustments to optimize the SCS-1R performance with the host automation computer . The display shows the current setting for each prompt. P ress any top row Select key to clear the display and enter the[...]

SCS-1R Installation Guide Digital Monitoring Products 23 opeRa t oR’s GuIde Set System Time/Date This selection allows you to set the correct time and date on the SCS-1R. All changes made in this selection print to the Activity Log printer . The time entered here is sent to panels if the T ime Change programming option is set to YES. SCS-1R MENU [...]

Digital Monitoring Products SCS-1R Installation Guide 24 pRInt out explana tIons Printout Explanations General Description Note: UL centr al station applications must use a serial printer listed for Fire Protective Signaling Systems. The SCS-1R prints out two general types of messages: changes in the system information and messages received from DM[...]

SCS-1R Installation Guide Digital Monitoring Products 25 pRInt out explana tIons Door Access This message lists the user name accessing the door strike relay and the door number that is being accessed. The door number matches the keypad address operated by the user . This message prints on the Activity Log only . Acknowledgment of Fire Alarms and T[...]

L T -1037 1.03 © 2009 Digital Monitoring P roducts, Inc. 800-641-4282 www .dmp.com Made in the USA INTRUSION • FIRE • ACCESS • NETWORKS 2500 North P artnership Boulevard Springfield, Missouri 65803-8877 9456 Important Information Use the table below to record the reciever key for your SCS-1R R eceiver . Keep this sheet and the rest of the ma[...]