Dodge 2010 manual

Journey O W N E R ’ S M A N U A L 2010[...]

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................ 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 8 7 4 UNDERST ANDING YOUR INSTRUMENT P ANEL .................................. 1 [...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number .............. 6 䡵 V ehicle Modifications/Alterations ............ 7 1[...]

INTRODUCTION Congratulations on selecting your new Chrysler Group LLC vehicle. Be assured that it r epresents pr ecision workmanship, distinctive styling, and high quality - all essentials that are traditional to our vehicles. This Owner’s Manual has been prepar ed with the assis- tance of service and engineering specialists to acquaint you with [...]

1 INTRODUCTION 5[...]

W ARNINGS AND CAUTIONS This Owners Manual contains W ARNINGS against op- erating procedur es that could result in an accident or bodily injury . It also contains CAUTIONS against proce- dures that could r esult in damage to your vehicle. If you do not read this entir e Owners Manual, you may miss important information. Observe all W arnings and Cau[...]

VEHICLE MODIFICA TIONS/AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. 1 INTRODUCTION 7[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W or d About Y our Keys ................. 1 2 ▫ W ireless Ignition Node (WIN) ............ 1 2 ▫ K e y F O B ........................... 1 3 ▫ T ip Start Feature ...................... 1 4 ▫ Removing Key FOB From Ignition ......... 1 4 ▫ Key-In-Ignition Reminder ............... [...]

▫ Using The Panic Alarm ................. 2 3 ▫ Remote Open W indow Featuree ........... 2 3 ▫ Programming Additional T ransmitters ...... 2 3 ▫ T ransmitter Battery Replacement .......... 2 3 ▫ General Information ................... 2 5 䡵 Remote Starting System — If Equipped ....... 2 5 ▫ How T o Use Remote Start ............... 2[...]

▫ Seat Belt Extender ..................... 5 4 ▫ Supplemental Restraint System (SRS) — Airbags ............................ 5 4 ▫ Advanced Front Airbag Features .......... 5 6 ▫ Airbag Deployment Sensors And Controls . . . 61 ▫ Event Data Recorder (EDR) .............. 6 8 ▫ Child Restraint ....................... 7 0 䡵 Engine Break-[...]

A WORD ABOUT YOUR KEYS Y our vehicle uses a keyless ignition system. This system consists of a Key Fob with Remote Keyless Entry (RKE) transmitter and a W ireless Ignition Node (WIN) with integral ignition switch. Y ou can insert the Key Fob into the ignition switch with either side up. Wireless Ignition Node (WIN) The W ireless Ignition Node (WIN)[...]

Key Fob The Key Fob operates the ignition switch. It also contains the Remote Keyless Entry (RKE) transmitter and an emergency key , which stores in the r ear of the Key Fob. The emergency key allows for entry into the vehicle should the battery in the vehicle or the Key Fob go dead. Y ou can keep the emer gency key with you when valet parking. T o[...]

Tip Start Feature Do not press the accelerator . Use the Key Fob to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue to run, and it will disengage automatically when the engine is running. Removing Key Fob From Ignition Place the shift lever in P ARK. T urn the k[...]

CAUTION! An unlocked car is an invitation to thieves. Always remove the key from the ignition and lock all doors when leaving the vehicle unattended. Key-In-Ignition Reminder Opening the driver’s door when the Key Fob is in the ignition and the ignition switch position is LOCK or ACC, a chime will sound to remind you to r emove the key . NOTE: Th[...]

If the V ehicle Security Light turns on during normal vehicle operation (vehicle running for longer than 10 sec- onds), it indicates that there is a fault in the electr onics. Should this occur , have the vehicle serviced as soon as possible by an authorized dealer . NOTE: The Sentry Key 威 Immobilizer system is not compatible with aftermarket rem[...]

Customer Key Programming Programming Key Fobs or RKE transmitters may be performed at an authorized dealer . General Information The Sentry Key 威 system complies with FCC rules Part 15 and with RSS-210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must acc[...]

3. Close all doors. The V ehicle Security Light in the instrument cluster will flash to signal that the system is arming. During this period, opening any door or the liftgate will cancel the arming process. NOTE: For added security , whenever the Security Alarm is armed, the HomeLink 威 /Garage Door Opener (if equipped) is disabled as well. T o Di[...]

This feature also turns on the appr oach lighting (if equipped). Refer to “Electronic V ehicle Information Cen- ter (EVIC)/Personal Settings (Customer-Pr ogrammable Features)” in “Understanding Y our Instrument Panel” for further information. The interior lights will fade to off after appr oximately 30 seconds or they will immediately fade [...]

T o Unlock the Doors and Liftgate Press and r elease the UNLOCK button on the RKE transmitter once to unlock the driver’s door or twice within five seconds to unlock all doors and liftgate. The turn signal lights will flash to acknowledge the unlock signal. The illuminated entry system will also turn on. Remote Key Unlock, Driver Door/All Doors F[...]

Flash Lights with Remote Key Lock This feature will cause the turn signal lights to flash when the doors are locked or unlocked with the RKE transmit- ter . This feature can be turned on or turned of f. T o change the current setting, pr oceed as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information Center [...]

Information Center (EVIC)/Personal Settings (Customer- Programmable Featur es)” in “Understanding Y our In- strument Panel” for further information. T o Lock the Doors and Liftgate Press and r elease the LOCK button on the RKE transmit- ter to lock all doors and liftgate. The turn signal lights will flash and the horn will chirp to acknowledg[...]

Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. Using the Panic Alarm T o turn the Panic Alarm featur e ON or OFF , press and hold the P ANIC button on the RKE transmitter for at least one second and release. When the Panic Alarm is on, the headlights a[...]

NOTE: • Perchlorate Material — special handling may apply . See www .dtsc.ca.gov/hazardouswaste/perchlorate • Do not touch the battery terminals that are on the back housing or the printed circuit boar d. 1. Battery access is through a door located on the rear of the Key Fob. Insert a small, flat blade screwdriver into the slot and gently pry[...]

3. Reposition the access door panel over the battery opening and snap into place. General Information This device complies with Part 15 of the FCC rules and RSS 210 of Industry Canada. Operation is subject to the following conditions: • This device may not cause harmful interference. • This device must accept any interference r eceived, includi[...]

• Hood closed • Liftgate closed • HAZARD switch off • BRAKE switch inactive (brake pedal not pressed) • Ignition key removed fr om ignition switch • Battery at an acceptable charge level, and • RKE P ANIC button not pressed. W ARNING! • Do not start or run an engine in a closed garage or confined area. Exhaust gas contains Carbon Mo[...]

• For security , power window and power sunroof op- eration (if equipped) are disabled when the vehicle is in the Remote Start mode. • The engine can be started two consecutive times (two 15-minute cycles) with the RKE transmitter . However , the ignition switch must be cycled to the ON position before you can r epeat the start sequence for a t[...]

DOOR LOCKS Manual Door Locks T o lock each door , push the door lock plunger on each door trim panel downward. T o unlock the front doors, pull the inside door handle to the first detent. T o unlock the rear doors, pull the door lock plunger on the door trim panel upward. If the door lock plunger is down when you shut the door , the door will lock.[...]

W ARNING! • For personal security and safety in the event of an accident, lock the vehicle doors before you drive as well as when you park and leave the vehicle. • When leaving the vehicle, always remove the key from the ignition and lock your vehicle. Unsuper- vised use of vehicle equipment may cause severe personal injuries and death. • Nev[...]

T o prevent you from locking your Key Fob in the vehicle, the power door lock switch will not operate when the Key Fob is in the ignition and either front door is open. A chime will sound as a reminder to r emove the Key Fob. Automatic Door Locks — If Equipped The auto door lock feature can be enabled or disabled by your authorized dealer . See y[...]

5. The doors were not previously unlocked 6. The vehicle speed is 0 mph (0 km/h). Automatic Unlock Doors on Exit Programming The Automatic Unlock Doors On Exit feature can be enabled or disabled as follows: • For vehicles equipped with the EVIC, refer to “Elec- tronic V ehicle Information Center (EVIC)/Personal Settings (Customer-Pr ogrammable [...]

Child Protection Door Lock System (Rear Doors) T o provide a safer environment for small childr en riding in the rear seats, the r ear doors are equipped with a Child Protection Door Lock system. T o Engage the Child Protection Door Lock System 1. Open the rear door . 2. Insert the tip of the emergency key (or alike) into the child lock control and[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. Failure to follow this warning may result in serious injury or death. NOTE: • After engaging the Child Protection Door Lock sys- tem, always test the door from the inside to ma[...]

3. Repeat Steps 1 and 2 for the opposite rear door . NOTE: After disengaging the Child Protection Door Lock system, always test the door from the inside to make certain it is in the desired position. WINDOWS Power Windows The window controls on the driver’s door trim panel control all of the door windows. There ar e single window controls on each[...]

NOTE: • For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power window switches will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Open- ing either front door will cancel this featur e. • For vehicles equipped with the EVIC, the power window switches will remain active[...]

Auto-Up Feature with Anti-Pinch Protection — If Equipped On some models, the driver’s and front passenger’s power window switch has an Auto-up feature. Pull the window switch up to the second detent, release, and the window will go up automatically . T o stop the window from going all the way up during the Auto-up operation, push down on the [...]

position). T o enable the window controls, press and release the window lockout button again (setting it in the up position). Reset It may be necessary at some point in time to reactivate the Auto-up/Auto-down feature. T o do so, perform the following steps: 1. Pull the window switch up to close window com- pletely and continue to hold the switch u[...]

the rear windows open, then open the fr ont and rear windows together to minimize the buffeting. If the buffeting occurs with the sunr oof open, adjust the sun- roof opening to minimize the buf feting or open any window . LIFTGA TE The liftgate can be unlocked or locked with the Remote Keyless Entry (RKE) transmitter or by activating the power door[...]

W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. These fumes could injure you and your passengers. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the blower switch on the climate contro[...]

seat belt webbing into position by extending the belt all the way out and then adjusting the belt to the desired length to r estrain a child seat or secure a lar ge item in a seat — if equipped If you will be carrying children too small for adult-sized seat belts, the seat belts or the Lower Anchors and T ether for CHildren (LA TCH) feature also [...]

ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All seating positions in your vehicle are equipped with combination lap/shoulder belts. The belt webbing retractor is designed to lock during very sudden stops or impacts. This feature allows th[...]

W ARNING! (Continued) • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries, or you could even slide out of part of the belt. Follow these instructions to wear your seat belt safely and to keep your pas- sengers safe, too. • T wo people should never be belted into a singl[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

W ARNING! (Continued) • A belt that is worn under your arm is very danger - ous. Y our body could strike the inside surfaces of the vehicle in a collision, increasing head and neck injury . A belt worn under the arm can cause internal injuries. Ribs aren’t as strong as shoulder bones. W ear the belt over your shoulder so that your strongest bon[...]

W ARNING! • A lap belt worn too high can increase the risk of internal injury in a collision. The belt forces won’t be at the strong hip and pelvic bones, but across your abdomen. Always wear the lap belt as low as possible and keep it snug. • A twisted belt can’t do its job as well. In a collision, it could even cut into you. Be sure the b[...]

Adjustable Upper Shoulder Belt Anchorage In the driver’s seat and front passenger’s seat, the shoul- der belt can be adjusted upward or downwar d to posi- tion the belt away from your neck. Push and fully depress the button above the webbing to r elease the anchorage, then move it up or down to the position that fits you best. As a guide, if yo[...]

In the rear seat, move towar d the center of the seat to position the belt away from your neck. Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 in (15 to 30 cm) above the latch plate, grasp and twist[...]

3. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the Automatic Locking Mode. How to Disengage The Automatic Locking Mode Disconnect the combination lap/shoulder belt from the buckle and allow it to retract completely to disengage the Automatic Locking Mode and activate the [...]

How the Active Head Restraints (AHR) W ork The Occupant Restraint Controller (ORC) determines whether the severity or type of rear impact r equire the Active Head Restraints (AHR) to deploy . In case of AHR deployment both driver and front passenger seat AHR’s will be deployed. When AHR’s deploy during a r ear impact, the head restraint fr ont [...]

CAUTION! All occupants, including the driver , should not oper- ate a vehicle or sit in a vehicle’s seat until the head restraints are placed in their proper positions in order to minimize the risk of neck injury in the event of an accident. NOTE: For more information on pr operly adjusting and positioning the head restraint, r efer to “Adjusti[...]

3. Pull down then rearward towards the r ear of the vehicle then down to engage the locking mechanism. 1 — Downward Movement 2 — Rearward Movement 3 — Final Downward Movement T o Engage Locking Mecha- nism 2 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE 51[...]

4. The AHR fr ont soft foam and trim half should lock into the back decorative plastic half. NOTE: • If you have difficulties or pr oblems resetting the head restraints, see an authorized dealer . • For safety reasons, have the Active Head Restraints checked by a qualified specialist at an authorized dealer . Enhanced Seat Belt Use Reminder Sys[...]

BeltAlert 威 Programming The BeltAlert 威 can be enabled or disabled by your authorized dealer or by performing the following steps: NOTE: The following steps must occur within the first 60 seconds of the ignition switch being turned to the ON or ST AR T position. Chrysler Group LLC does not r ecom- mend deactivating BeltAlert 威 . 1. W ith all [...]

Pregnant women should wear the lap part of the belt across the thighs and as snug acr oss the hips as possible. Keep the belt low so that it does not come across the abdomen. That way the strong bones of the hips will take the force if ther e is a collision. Seat Belt Extender If a seat belt is too short even when fully extended and when the adjust[...]

NOTE: These airbags are certified to the new Federal regulations for Advanced Airbags. The Advanced Front Airbags have a multistage inflator design. This allows the airbag to have differ ent rates of inflation based on the severity and type of collision. This vehicle may also be equipped with Supplemental Side Airbag Inflatable Curtains (SABIC) to [...]

Airbag System Components The airbag system consists of the following: • Occupant Restraint Controller (ORC) • Airbag W arning Light • Driver Front Airbag • Front Passenger Airbag • Supplemental Rear Impact Active Head Restraint for Driver and Front Passenger • Front and Side Impact Sensors • Steering Wheel and Column • Instrument Pa[...]

W ARNING! • No objects should be placed over or near the airbag on the instrument panel, because any such objects could cause harm if the vehicle is in a crash severe enough to cause the airbag to inflate. • Do not put anything on or around the airbag covers or attempt to open them manually . Y ou may damage the airbags and you could be injured[...]

When the bag deploys, it opens the seam between the front and side of the seat’s trim cover . Each bag deploys independently , that is a left side impact deploys the left bag only and a right-side impact deploys only the right bag. Supplemental Side Airbag Inflatable Curtain (SABIC) — If Equipped SABIC airbags offer side-impact and vehicle r ol[...]

The system includes sensors adjacent to both front and rear seat occupants that ar e calibrated to deploy the SABIC airbags during impacts that requir e airbag occu- pant protection. W ARNING! • If your vehicle is equipped with left and right Side Airbag Inflatable Curtain (SABIC), do not stack luggage or other cargo up high enough to block the l[...]

W ARNING! Infants in rear-facing child restraints should NEVER ride in the front seat of a vehicle with a passenger front airbag. An airbag deployment can cause severe injury or death to infants in that position. Children that ar e not big enough to wear the vehicle seat belt properly (see Section on Child Restraints) should be secured in the r ear[...]

W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt to restrain you properly . In some collisions, the airbags won’t deploy at all. Always wear your seat belts even though you have airbags. • Being too close to the steering wheel or instrument panel during front airb[...]

The Advanced Front Airbags will not deploy in all fr ontal collisions, including some that may produce substantial vehicle damage — for example, some pole collisions, truck underrides, and angle of fset collisions. On the other hand, depending on the type and location of impact, Advanced Front Airbags may deploy in crashes with little vehicle fro[...]

It also includes diagnostics that will illuminate the instru- ment cluster Airbag W arning Light if a malfunction is noted. The diagnostics also recor d the nature of the malfunction. W ARNING! Ignoring the Airbag W arning Light in your instru- ment panel could mean you won’t have the airbags to protect you in a collision. If the light does not c[...]

The ORC determines if a side collision requir es the side airbags to inflate based on the severity and type of collision. The ORC monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON positions. These include all of the items previously mentioned. Based on the severity and type of collisi[...]

Because airbag sensors estimate deceleration over time, vehicle speed and damage are not good indicators of whether or not an airbag should have deployed. NOTE: In a rollover the pr etensioners and/or SABIC airbags may deploy on both sides of the vehicle. Front and Side Impact Sensors In front and side impacts, impact sensors aid the ORC in determi[...]

If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to the driver and fr ont passenger as the airbags deploy and unfold. The abrasions are similar to friction r ope burns or those you might get sliding along a carpet or gymna[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

Airbag W arning Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be mainte- nance free, if any of the following occurs, have an authorized dealer service the system immediately . • The Airbag W arning Light does not come on for approximately four to six seconds wh[...]

2. Under certain circumstances, EDR data may not be recor ded (e.g., loss of battery power). In conjunction with other data gathered during a com- plete accident investigation, the electronic data may be used by Chrysler Group LLC and others to learn mor e about the possible causes of crashes and associated injuries in order to assess and impr ove [...]

3. Requested by police under a legal warrant. 4. Otherwise required by law . Data parameters that are r ecorded: • Diagnostic trouble code(s) and warning light status for electronically-contr olled safety systems, including the airbag system • V ehicle speed • Engine RPM • Brake switch status • Pedal position • And other parameters depe[...]

There ar e differ ent sizes and types of restraints for children fr om newborn size to the child almost large enough for an adult safety belt. Always check the child seat Owner’s Manual to ensure you have the corr ect seat for your child. Use the restraint that is corr ect for your child. Infants and Child Restraints • Safety experts recommend [...]

than one year . These child seats are also held in the vehicle by the lap/shoulder belt or the LA TCH child restraint anchorage system. Refer to “LA TCH — Child Seat Anchorage System (Lower Anchors and T ether for CHildren)”. The belt-positioning booster seat is for children weighing more than 40 lbs (18 kg), but who ar e still too small to f[...]

3. Lift the seat cushion up and push back to lock it in the booster seat position. 4. Place the child upright in the seat with their back firmly against the seatback. 5. Grasp the latch plate and pull out the seat belt. 6. Slide the latch plate up the webbing as far as necessary to allow the seat belt to go around the child’s lap. Release Loop Bo[...]

NOTE: The lap portion of the seat belt should be low on the hips and as snug as possible. 7. Once the seat belt is long enough to fit properly , insert the latch plate into the buckle until you hear a “click.” 8. T o remove the slack fr om the lap belt, pull upward on the shoulder portion of the seat belt. 9. T o release the seat belt, push the[...]

• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. NOTE: For additional information, refer to www .seatcheck.org [...]

Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it befor e you buy it. • The restraint[...]

connection to the top tether anchors have been available for some time. For some older child restraints, many child restraint manufactur ers offer add-on tether strap kits or retr ofit kits. Y ou are urged to take advantage of all the available attachments provided with your child r e- straint in any vehicle. All three second-r ow passenger seating[...]

Installing the LA TCH-Compatible Child Restraint System W e urge you to follow the manufacturer’s dir ections carefully when installing your child r estraint. Not all child restraint systems will be installed as described her e. Again, carefully follow the installation instr uctions that are pr ovided with the child restraint system. NOTE: When i[...]

hook for attachment to the tether strap anchor and a means of adjusting the tension of the strap. Y ou will first loosen the adjusters on the lower straps and on the tether strap so that you can more easily attach the hooks or connectors to the vehicle anchors. Next, attach the lower hooks or connectors over the top of the seatcover material. Then [...]

W ARNING! Improper installation of a child restraint to the LA TCH anchorages can lead to failure of an infant or child restraint. The child could be badly injured or killed. Follow the manufacturer’s directions exactly when installing an infant or child restraint. Installing Child Restraints Using the V ehicle Seat Belt The seat belts in the pas[...]

T o attach a child restraint tether strap: • Route the tether strap to provide the most dir ect path for the strap between the anchor and the child seat, preferably between the head r estraint posts underneath the head restraint. • If necessary , move the seat forward to provide better access to the tether anchor . • Attach the tether strap h[...]

NOTE: Ensure that the tether strap does not slip into the opening between the seatbacks as you remove slack in the strap. W ARNING! An incorrectly anchored tether strap could lead to increased head motion and possible injury to the child. Use only the anchor positions directly behind the child seat to secure a child restraint top tether strap. T ra[...]

A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered a normal part of the br eak-in and not inter- preted as an indication of dif ficulty . SAFETY TIPS T ransporting Passengers NEVER TRANSPOR T P ASSENGERS IN THE CARGO AREA. W ARNING! • It is extremely dangerous to ride in a ca[...]

Exhaust Gas W ARNING! • Exhaust gases can injure or kill. They contain carbon monoxide (CO), which is colorless and odorless. Breathing it can make you unconscious and can eventually poison you. T o avoid breathing CO follow these safety tips: Do not run the engine in a closed garage or in confined areas any longer than needed to move your vehicl[...]

Safety Checks Y ou Should Make Inside the V ehicle Seat Belts Inspect the seat belt system periodically , checking for cuts, frays, and loose parts. Damaged parts must be replaced immediately . Do not disassemble or modify the system. Front seat belt assemblies must be r eplaced after a collision. Rear seat belt assemblies must be replaced after a [...]

Door Latches Check for positive closing, latching, and locking. Fluid Leaks Check area under vehicle after overnight parking for fuel, engine coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, power steering fluid, or brake fluid leaks are suspected, the cause should be located and corrected immediately . 86 THINGS[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Mirrors .............................. 9 2 ▫ Inside Day/Night Mirror ................ 9 2 ▫ Automatic Dimming Mirror — If Equipped . . . 92 ▫ Outside Mirrors ...................... 9 3 ▫ Outside Mirrors Folding Featur e — If Equipped ........................... 9 4 ▫ Power Mirr[...]

▫ Power Seat — If Equipped .............. 1 0 2 ▫ Adjusting Active Head Restraints ......... 1 0 3 ▫ Second Row Passenger Seats ............ 1 0 6 ▫ Third Row Passenger Seats — Seven Passenger Models .................... 1 0 6 ▫ Heated Seats — If Equipped ............ 1 0 6 ▫ 60/40 Split Second-Row Passenger Seats .... 1 0 8 ▫ 5[...]

▫ Battery Saver Feature ................. 1 2 6 ▫ Cargo Light ........................ 1 2 6 䡵 W indshield W ipers And W ashers .......... 1 2 6 ▫ W indshield W iper Operation ............ 1 2 7 ▫ Intermittent W iper System .............. 1 2 8 ▫ W indshield W ashers .................. 1 2 9 ▫ Mist Feature ........................ 1 3[...]

▫ Power Sunroof Switch — If Equipped ...... 1 3 8 䡵 Garage Door Opener — If Equipped ........ 1 3 8 ▫ Programming HomeLink 威 .............. 1 4 0 ▫ Gate Operator/Canadian Programming .... 1 4 2 ▫ Using HomeLink 威 ................... 1 4 3 ▫ Reprogramming A Single HomeLink 威 Button ............................ 1 4 3 ▫ Securit[...]

䡵 Storage ............................. 1 5 6 ▫ Instrument Panel Storage Compartment — If Equipped .......................... 1 5 6 ▫ Console Storage ..................... 1 5 6 ▫ Flip ’n Stow™ Front Passenger Seat Storage — If Equipped ...................... 1 5 8 ▫ Second-Row Passenger Seat T emporary Storage Bin ...............[...]

MIRRORS Inside Day/Night Mirror A two-point pivot system allows for horizontal and vertical mirror adjustment. Adjust the mirror to center on the view through the r ear window . Headlight glare can be r educed by moving the small control under the mirr or to the night position (toward the rear of the vehicle). The mirr or should be adjusted while s[...]

CAUTION! T o avoid damage to the mirror during cleaning, never spray any cleaning solution directly onto the mirror . Apply the solution onto a clean cloth and wipe the mirror clean. Outside Mirrors T o receive maximum benefit, adjust the outside mirror(s) to center on the adjacent lane of traffic and a slight overlap of the view obtained from the [...]

Outside Mirrors Folding Feature — If Equipped Some models have exterior mirrors that ar e hinged. The hinge allows the mirror to pivot forwar d and rearwar d to resist damage. The hinge has thr ee detent positions: forward, r earward and normal. Power Mirrors The power mirror switch is located on the driver’s door trim panel. Power Mirror Switc[...]

Models without Express W indow Featur e Press the mirr or select button marked L (left) or R (right) and then press one of the four arr ow buttons to move the mirror in the dir ection the arrow is pointing. Models with Express W indow Featur e Press and r elease the mirror select button marked L (left) or R (right) and then press one of the four ar[...]

Sun V isor “Slide-On Rod” Feature — If Equipped This feature allows for additional flexibility in position- ing the visor to block out the sun. 1. Fold down the sun visor . 2. Unclip the visor from the center clip. 3. Pull the sun visor toward the inside rearview mirr or to extend it. Uconnect™ Phone — IF EQUIPPED Refer to “Uconnect™ [...]

the position desired. Using body pr essure, move forwar d and rearwar d on the seat to be sure that the seat adjusters have latched. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust any s[...]

Recliner Adjustment The control lever is on the outboar d side of the seat. T o recline the seat, lean forwar d slightly , lift the lever , lean back to the desired position and r elease the lever . T o return the seatback to its normal upright position, lean forward and lift the lever . Release the lever once the seatback is in the upright positio[...]

W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]

Driver’s Seat Height Adjustment — If Equipped The control lever is located on the outboar d side of the seat. Raise the lever to raise the seat. Lower the lever to lower the seat. The total seat travel is approximately 2.15 in (55 mm). Fold Flat Front Passenger Seat — If Equipped This feature allows for extended car go space. When the seat is[...]

Pull upward on the lever to fold or unfold the seat. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. Adjust any seat only while the vehicle is parked. Fold-Flat Seat Seatback Release 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 101[...]

Power Seat — If Equipped The power seat switch is on the outboard side of the seat near the floor . Use this switch to move the seat up, down, forward, r earward or to tilt the seat. W ARNING! Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adju[...]

Adjusting Active Head Restraints Active Head Restraints can reduce the risk of injury in the event of a rear impact. The Active Head Restraint should be adjusted so the top of the head restraint is located above the top of your ear . T o raise the head restraint, pull upward on the head restraint (on some models, you may need to pr ess the push but[...]

For comfort the Active Head Restraints can be tilted forward and backwar d. T o tilt the head restraint closer to the back of your head, pull outward on the bottom of the head restraint. Push r earward on the bottom of the head restraint to move the head r estraint away from your head. NOTE: • The head restraints should only be r emoved by quali-[...]

• In the event of deployment of an Active Head Re- straint, refer to “Occupant Restraints/Resetting Active Head Restraints (AHR)” in “Things to Know Before Starting Y our V ehicle” for further information. W ARNING! • Driving a vehicle with the head restraints removed or improperly adjusted could cause serious injury or death in the eve[...]

Second Row Passenger Seats These head restraints ar e non-adjustable and non-removable. Third Row Passenger Seats — Seven Passenger Models These head restraints ar e non-adjustable and non- removable. However , you can fold them forward when they are not in use by passengers. Refer to “50/50 Split Third-Row Passenger Seats with Fold-Flat Featur[...]

indicator light off after an additional 30 minutes of continuous operation. If Low-level heating is selected, the system automatically turns the heater and the indi- cator light off after appr oximately 30 minutes of continu- ous operation. NOTE: Once a heat setting is selected, heat will be felt within two to five minutes. W ARNING! • Persons wh[...]

60/40 Split Second-Row Passenger Seats T o provide additional storage area, each second-r ow passenger seat can be folded flat. This allows for ex- tended cargo space and still maintains some seating r oom if needed. NOTE: Prior to folding the second-row passenger seat, make sure the fr ont seatback is not in a reclined position. This will allow th[...]

T o Fold the Seat 1. Locate the control lever on the lower outboard side of the seat. 2. Place one hand on the seatback and apply a gentle pressur e. 3. Lift the control lever with the other hand, allow the seatback to move forward slightly , and then release the lever . W ARNING! T o prevent personal injury or damage to objects, keep your head, ar[...]

Forward and Rearward Adjustment The control lever is on the outboar d side of the seat. Lift the lever to move the seat forward or r earward. Release the lever once the seat is in the position desired. Then, using body pressur e, move forward and r earward on the seat to be sure that the seat adjusters have latched. W ARNING! Adjusting a seat while[...]

W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be adjusted properly and you could be injured. Adjust the seat only while the vehicle is parked. • Do not ride with the seatback reclined so that the shoulder belt is no longer resting a[...]

Seatback/Armrest — Second Row Passenger Seat The latch release-loop is located at the top of the seatback/armrest. Pull the r elease-loop upward to r e- lease the latch and then downward to lower the seatback/armrest. Raise the seatback/armrest and lock it in place when not in use or when additional seating area is r equired. W ARNING! Keep the l[...]

Move the control lever on the upper outboar d side of the seatback forward, and in one fluid motion, the seat cushion flips upward and the seat moves forwar d on its tracks. T ip ’n Slide™ Control Lever T ip n Slide Seat™ 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 1 13[...]

NOTE: A hand-grip is molded into the front of each quarter trim panel near the door opening to assist entry and exit from the thir d-row passenger seats. W ARNING! Do not drive the vehicle with the seat in this posi- tion, as it is only intended for entering and exiting the third row seats. Failure to follow this warning may result in personal inju[...]

W ARNING! Be certain that the seatback and seat are locked securely into position. Otherwise, the seat will not provide the proper stability for child seats and/or passengers. An improperly latched seat could cause serious injury . 50/50 Split Third-Row Passenger Seats with Fold-Flat Feature — Seven Passenger Models T o provide additional storage[...]

T o Unfold the Seat Grasp the assist strap loop on the seatback and pull it toward you to raise the seatback. Continue to raise the seatback until it locks in place. Raise the head restraint to lock it in place. The seatback can also be locked in a reclined position. T o do so, pull the latch release-loop located at the top of the seatback upward, [...]

W ARNING! (Continued) • Do not allow a passenger to sit in a third row seat with the second row seatback(s) folded flat. In a collision, the passenger could slide underneath the seat belt and be seriously or even fatally injured. TO OPEN AND CLOSE THE HOOD T wo latches must be released to open the hood. 1. Pull the hood release lever located unde[...]

2. Outside of the vehicle, locate the safety latch lever near the center of the grille between the grille and hood opening. Push the safety latch lever to the right and then raise the hood. Use the hood prop r od to secure the hood in the open position. Place the upper end of the prop r od in the hole on the underside of the hood. Underhood Safety [...]

CAUTION! T o prevent possible damage: • Before closing hood, make sure the hood prop rod is fully seated into its storage retaining clips. • Do not slam the hood to close it. Use a firm downward push at the center front edge of the hood to ensure that both latches engage. Never drive your vehicle unless the hood is fully closed, with both latch[...]

Headlights and Parking Lights T urn the end of the multifunction lever to the first detent for parking light operation. T urn the end of the lever to the second detent for headlight operation. Automatic Headlights — If Equipped This system automatically turns the headlights on or off according to ambient light levels. T o turn the system on, turn[...]

NOTE: The engine must be running befor e the head- lights will turn on in the automatic mode. Headlights with Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlights will turn on approximately 10 seconds after the wipers ar e turned on if the multifunction lever is placed in the AUT O position. In addition, th[...]

If you turn the headlights, or parking lights, or ignition switch ON again, the system will cancel the delay . If you turn the headlights off befor e the ignition, they will turn off in the normal manner . The headlight delay time is programmable on vehicles equipped with the EVIC. Refer to “Electronic V ehicle Information Center (EVIC)/Customer-[...]

Daytime Running Lights — If Equipped The high beam headlights will turn on as Daytime Running Lights (DRL) and operate at DRL (lower) inten- sity , whenever the ignition is ON, the engine is running, the headlight switch is off, the parking brake is of f, the turn signal is off, and the shift lever is in any position except P ARK. NOTE: The DRL?[...]

NOTE: The front fog lights will only operate with the headlights on low beam. Selecting high beam headlights will turn off the fr ont fog lights. T urn Signals Move the multifunction lever upward or downwar d and the corresponding turn signal indicator on the instr u- ment panel will flash to show proper operation of the front and r ear turn signal[...]

Lane Change Assist T ap the lever up or down once, without moving beyond the detent, and the turn signal (right or left) will flash three times then automatically turn of f. High/Low Beam Switch Push the multifunction lever away from you to switch the headlights to high beam. Pull the lever toward you, to switch the headlights back to low beam. Fla[...]

manually . A courtesy light is also mounted in the head- liner above the second row passenger seats. Pr ess and release the lens to turn ON or turn OFF the light manually . These lights also turn on when you press the UNLOCK button on the RKE transmitter , open a door or the liftgate, or turn the dimmer control completely up- ward to the second det[...]

Windshield Wiper Operation Rotate the end of the lever upward to the LO position for low-speed wiper operation. Rotate the end of the lever upward to the HI position for high-speed wiper operation. NOTE: The wipers will automatically return to the “park” position if you turn OFF the ignition switch while they are operating. The wipers will r es[...]

CAUTION! (Continued) • Always remove any buildup of snow that prevents the windshield wiper blades from returning to the park position. If the windshield wiper control is turned OFF and the blades cannot return to the park position, damage to the wiper motor may occur . Intermittent Wiper System Use the intermittent wiper system when weather cond[...]

to a maximum of approximately 18 seconds between cycles at vehicle speeds greater than 10 mph (16 km/h). NOTE: The wiper delay times depend on vehicle speed. If the vehicle is moving less than 10 mph (16 km/h), delay times will be doubled. Windshield W ashers T o use the washer , pull the windshield wiper/washer control lever towar d you and hold i[...]

Mist Feature Push downward on the windshield wiper/washer con- trol lever to activate a single wipe cycle to clear the windshield of road mist or spray fr om a passing vehicle. The wipers will continue to operate until you release the lever . Headlights With Wipers (A vailable with Automatic Headlights Only) When this feature is active, the headlig[...]

TIL T/TELESCOPING STEERING COLUMN — IF EQUIPPED This feature allows you to tilt the steering column upward or downwar d. It also allows you to lengthen or shorten the steering column. The tilt/telescoping control handle is located below the steering wheel at the end of the steering column. T o unlock the steering column, push the control handle d[...]

ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, the Electronic Speed Contr ol takes over the accelerator operation at speeds greater than 25 mph (40 km/h). The Electronic Speed Contr ol lever is located on the right side of the steering wheel. NOTE: In order to ensur e proper operation, the Elec- tronic Speed Contr ol System has been designe[...]

W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system off when you are not using it. T o Set a Desired Speed When the vehicle reaches the speed desir ed, press down- wa[...]

T o V ary the Speed Setting When the Electronic Speed Contr ol is set, you can in- crease speed by pushing up and holding the RESUME ACCEL lever . If the lever is continually held in the RESUME ACCEL position, the set speed will continue to increase until the lever is r eleased, then the new set speed will be established. T apping RESUME ACCEL once[...]

W ARNING! Electronic Speed Control can be dangerous where the system cannot maintain a constant speed. Y our ve- hicle could go too fast for the conditions, and you could lose control. An accident could be the result. Do not use Electronic Speed Control in heavy traffic or on roads that are winding, icy , snow-covered, or slippery . P ARKVIEW 姞 R[...]

CAUTION! (Continued) • T o avoid vehicle damage, the vehicle must be driven slowly when using ParkV iew 威 to be able to stop in time when an obstacle is seen. It is recom- mended that the driver look frequently over his/ her shoulder when using ParkV iew 威 . NOTE: If snow , ice, mud, or anything else builds up on the camera lens, clean the le[...]

4. When the vehicle is shifted into REVERSE, an image of the rear of the vehicle will appear with a caution note to “check entire surr oundings” displayed across the top of the screen. 5. When the vehicle is shifted out of REVERSE, the rear camera mode is exited and the audio screen appears again. OVERHEAD CONSOLE The overhead console contains [...]

Sunglasses Storage T o access the storage compartment, press on the raised bars on the compartment door in the center of the console and release and the door will swing downwar d. Interior Observation Mirror The convex interior observation mirror pr ovides the driver and front seat passenger a wide field of view to conveniently view passengers sitt[...]

NOTE: HomeLink 威 is disabled when the V ehicle Secu- rity Alarm is active. W ARNING! • Y our motorized door or gate will open and close while you are training the Universal T ransceiver . Do not train the transceiver if people, pets or other objects are in the path of the door or gate. Only use this transceiver with a garage door opener that ha[...]

Programming HomeLink 姞 Before Y ou Begin If you have not trained any of the HomeLink 威 buttons, erase all channels before you begin training. T o do this, press and hold the two outside buttons for 20 seconds until the red indicator flashes. It is recommended that a new battery be placed in the handheld transmitter of the device that is being c[...]

• After training a HomeLink 威 channel, if the garage door does not operate with HomeLink 威 and the ga- rage door opener was manufactured after 1995, the garage door opener may have a rolling code. If so, proceed to the heading “Pr ogramming A Rolling Code System.” 4. Press and hold the just-trained HomeLink 威 button and observe the indi[...]

6. Firmly press and release the LEARN or TRAINING button. The name and color of the button may vary by manufacturer . NOTE: Y ou have 30 seconds in which to initiate the next step after the LEARN button has been pressed. 7. Return to the vehicle and press the programmed HomeLink 威 button twice (holding the button for two seconds each time). If th[...]

successfully accepted the frequency signal. The indica- tor light will flash slowly and then rapidly when fully trained. If you unplugged the device for training, plug it back in at this time. Then proceed with Step 4 under “Pr ogramming HomeLink 威 ” earlier in this section. Using HomeLink 姞 T o operate, press and release the pr ogrammed Ho[...]

T roubleshooting Tips If you are having tr ouble programming HomeLink 威 , her e are some of the most common solutions: • Replace the battery in the original transmitter . • Press the LEARN button on the Garage Door Opener to complete the training for a Rolling Code. • Did you unplug the device for training, and remember to plug it back in? [...]

POWER SUNROOF — IF EQUIPPED The power sunroof switch is located between the sun visors on the overhead console. W ARNING! • Never leave children in a vehicle with the key in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the power sunroof while operating the power sunroof switch. Such entrapment may [...]

Opening Sunroof — Manually Press and hold the switch in the r earward position. Release the switch when the sunroof is in the position desired and it will stop moving. If you continue to hold the switch in the rearwar d position, the sunroof will open fully and then stop automatically . Release the switch once the sunroof stops moving. Opening Su[...]

Pinch Protect Override If a known obstruction (ice, debris, etc.) pr events closing, press the switch forwar d and hold for two seconds after the reversal occurs. This allows the sunr oof to move towards the closed position. NOTE: Pinch protection is disabled while the switch is pressed. V enting Sunroof — Express Press and r elease the ⬙ V ⬙[...]

Ignition Off Operation For vehicles not equipped with the Electronic V ehicle Information Center (EVIC), the power sunroof switch will remain active for 45 seconds after the ignition switch is turned to the LOCK position. Opening either front door will cancel this feature. For vehicles equipped with the EVIC, the power sunroof switch will remain ac[...]

A third fused 12 V olt power outlet is located on the back of the center console. This power outlet has power available when the ignition switch is in the LOCK, ON or ACC position. Front Power Outlets 1 — Switched Power 2 — Battery Power Rear Power Outlet 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 149[...]

A fourth fused 12 V olt power outlet is located on the left quarter trim panel in the cargo ar ea. This power outlet has power available when the ignition switch is in the ON or ACC position. NOTE: • T o ensure proper operation a MOP AR 威 knob and element must be used. • Do not exceed the maximum power of 160 W atts (13 Amps) at 12 V olts. If[...]

W ARNING! T o avoid serious injury or death: • Only devices designed for use in this type of outlet should be inserted into any 12 V olt outlet. • Do not touch with wet hands. • Close the lid when not in use and while driving the vehicle. • If this outlet is mishandled, it may cause an electric shock and failure. CAUTION! • Many accessori[...]

CAUTION! (Continued) • Power outlets are designed for accessory plugs only . Do not hang any type of accessory or acces- sory bracket from the plug. POWER INVERTER — IF EQUIPPED Y our vehicle may be equipped with a 1 15 V olt AC (150 W att maximum) power outlet located on the back of the center console. This outlet can power cellular phones, el[...]

may have to be reset manually . T o reset the inverter manually press the power inverter button OFF and ON. T o avoid overloading the circuit, check the power ratings on electrical devices prior to using the inverter . The control switch for the outlet is located in the switch bank above the climate controls. Press and r elease the switch once to t[...]

CUPHOLDERS There ar e two cupholders, located in the center floor console, for the front passengers. For passengers in the second row ther e are two cuphold- ers, located in the center armrest between the two seats. Center Console Cupholders Armrest Cupholders 154 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

For vehicles equipped with third r ow seating, there ar e additional cupholders located in the trim panels. In addition to cupholders, vehicles may also be equipped with bottle holders. The bottle holders are located on the door trim panels. W ARNING! If containers of hot liquid are placed in the bottle holder , they can spill when the door is clos[...]

STORAGE Instrument Panel Storage Compartment — If Equipped Press and r elease the button on the door to open it. The door swings upward to allow easy access to the compart- ment. Console Storage Open storage areas, or cubby bins, ar e located in the floor console and center console. Instrument Panel Storage Compartment Floor Console Cubby Bin 156[...]

There is additional storage under the center console armrest. Pull upwar d on the release lever , located on the front of the lid. NOTE: The sliding armrest (if equipped) must be in the rearwar d position to access the release button on the front of the bin door . Center Console Cubby Bin Center Console Storage Bin 3 UNDERST ANDING THE FEA TURES OF[...]

Flip ’n Stow™ Front Passenger Seat Storage — If Equipped The seat latch release-loop is located in the center of the seat cushion between the seat cushion and the seatback. Pull the loop upward to r elease the latch and then forward to open the seat to the detent position. NOTE: Make sure that objects inside the bin do not interfere with the [...]

Second-Row Passenger Seat T emporary Storage Bin This is a temporary storage bin designed for use when the seatback/armrest is down. Be sur e to remove all items from this bin befor e raising the seatback/armrest. Second-Row Map Pocket and Grocery Retainers — If Equipped A map storage pocket and gr ocery retainers ar e located on the back of the [...]

In-Floor Storage Bin with Removable Liner NOTE: Position the front seat to at least a mid-track position to provide easier access to the storage bin. An in-floor storage bin is located behind each front seat. Each 1.6 gal (5.9 l) bin can hold up to 12, 12 oz (0.35 l) cans, plus ice, or other items. The removable bin liner allows for easy filling, e[...]

CHILL ZONE 姞 BEVERAGE COOLER STORAGE COMP ARTMENT The Chill Zone 威 Beverage Cooler Storage Compartment can keep chilled beverages cool depending on ambient temperature and climate contr ol setting. Chill Zone 威 is intended for nonperishable beverages only . The Chill Zone 威 compartment is located on the passenger side of the instrument pane[...]

Press and r elease the button on the door to open it. the large door will swing upwar d to allow easy access to the compartment contents. Chill Zone 姞 Beverage Cooler Operation The blower speed setting on the climate control sets the rate at which the air flows into the compartment. The airflow control valve inside the compartment determines how [...]

NOTE: Whether operating a Manual Heating and A/C system or operating an A TC system in the manual mode, the A/C indicator must be ON to cool the compartment. CARGO AREA FEA TURES Rechargeable Flashlight — If Equipped The rechar geable LED flashlight stores in its char ging station in the left rear quarter trim panel. T o remove it, press on the i[...]

Cargo Management System Five Passenger System Features • A raised load floor that sits on top of a large built-in storage bin. • A tri-fold door built into the load floor that allows easy access to items in the built-in storage bin. • 60/40 split second-row passenger seats with fold flat feature, which allows for extended car go space. Refer [...]

Cargo T ie-Downs W ARNING! Cargo tie-downs are not safe anchors for a child seat tether strap. In a sudden stop or collision, a tie-down could pull loose and allow the child seat to come loose. A child could be badly injured. Use only the anchors provided for child seat tethers. Cargo tie-downs ar e located on both rear trim panels. These tie-downs[...]

W ARNING! The weight and position of cargo and passengers can change the vehicle center of gravity and vehicle handling. T o avoid loss of control resulting in per- sonal injury , follow these guidelines for loading your vehicle: • Do not carry loads that exceed the load limits de- scribed on the label attached to the left door or left door cente[...]

The cover , when extended, covers the cargo ar ea to keep items out of sight. Notches in the trim panels near the liftgate opening secure the extended cover in place. The cover rolls away neatly inside its housing when not in use. Y ou can also remove the cover from the vehicle to make more r oom in the cargo ar ea. T o install the cover , position[...]

Grab the cover handle and pull it toward you. As the cover nears the liftgate opening, guide the rear attach- ment posts (on both ends of the cover) into the notches in the trim panels. Lower the cover to position the posts into the bottom of the notches and release the handle. W ARNING! A cargo cover that is unsecured in the vehicle could cause in[...]

Rotate the switch upward to the “On” position will activate the rear wiper . Rotate the switch upward to the “washer” position will activate that rear washer . The washer pump will continue to operate as long as the lever or ring is engaged. Upon release, the wipers will cycle thr ee times before r eturning to the set position. If the rear [...]

CAUTION! (Continued) • In cold weather , always turn off the rear wiper switch and allow the rear wiper to return to the park position before turning off the engine. If the rear wiper switch is left on and the rear wiper freezes to the window , damage to the rear wiper motor may occur when the vehicle is restarted. • Always remove any buildup o[...]

CAUTION! (Continued) • Do not use scrapers, sharp instruments, or abra- sive window cleaners on the interior surface of the window . • Keep all objects a safe distance from the window . ROOF LUGGAGE RACK — IF EQUIPPED The roof rack cr oss rails and side rails are designed to carry cargo weight. The load must not exceed 150 lbs (68 kg), and it[...]

2. Relocate the cross rails, aligning the cross rail stan- chions (end pieces) with one of the vertical marks on the outboard surface of the side rail for pr oper positioning. There ar e four frontwar d marks for the front cr oss rail and four rearwar d marks for the rear cr oss rail. Make sure the cr oss rails remain equally spaced or parallel at [...]

CAUTION! (Continued) • Long loads, which extend over the windshield, such as wood panels or surfboards, or loads with large frontal area should be secured to both the front and rear of the vehicle. • Place a blanket or other protection between the surface of the roof and the load. • T ravel at reduced speeds and turn corners care- fully when [...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ............... 1 7 9 䡵 Instrument Cluster .................... 1 8 0 䡵 Instrument Cluster Descriptions ........... 1 8 1 䡵 Compass Mini-T rip Computer (CMTC) — If Equipped .......................... 1 9 6 ▫ CMTC Reset Buttons .................. 1 9 7 ▫ Compas[...]

䡵 Media Center 230 (REQ) — AM/FM Stereo Radio And 6–Disc CD/DVD Changer (MP3/WMA AUX Jack) .................. 2 1 2 ▫ Operating Instructions - Radio Mode ...... 2 1 2 ▫ Operation Instructions - (Disc Mode For CD And MP3/WMA Audio Play , DVD-V ideo) . . . 221 ▫ Notes On Playing MP3/WMA Files ....... 2 2 3 ▫ List Button (Disc Mode For M[...]

▫ Operating Instructions — Radio Mode ..... 2 4 1 ▫ Operation Instructions — CD Mode For CD And MP3 Audio Play ................. 2 4 7 ▫ Notes On Playing MP3 Files ............ 2 4 9 ▫ List Button (CD Mode For MP3 Play) ...... 2 5 2 ▫ Info Button (CD Mode For MP3 Play) ...... 2 5 2 䡵 Media Center 830N (REU) — AM/FM Stereo Radio An[...]

▫ Operating Instructions — V ideo Entertainment System (VES)™ (If Equipped) ............ 2 6 3 䡵 Uconnect™ Multimedia (Sirius Backseat TV™) — If Equipped ........................ 2 6 3 䡵 V ideo Entertainment System (VES)™ — If Equipped ............................ 2 6 3 䡵 Universal Consumer Interface (UCI) — If Equipped ....[...]

INSTRUMENT P ANEL FEA TURES 1 — Side W indow Demist Outlet 5 — Hazard Switch 9 — Climate Control 2 — Air Outlet 6 — Switch Bank 10 — Radio 3 — Instrument Cluster 7 — Beverage Cooler/Storage Compartment* 1 1 — Ignition Switch 4 — Storage Compartment or Remote Display Panel* 8 — Glove Box * If Equipped 4 UNDERST ANDING YOUR INST[...]

INSTRUMENT CLUSTER 180 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Coolant T emperature Gauge The temperature gauge indicates engine coolant tem- perature. Any reading within the normal range indicates that the cooling system is operating satisfactorily . The gauge pointer will likely indicate a high temperature when driving in hot weather , up mountain grades, in heavy traffic, [...]

idle the vehicle. If the temperature r eading does not return to normal, turn the engine of f immediately and call for service. NOTE: As the coolant temperature gauge appr oaches ⬙ H, ⬙ this indicator will illuminate and a single chime will sound. Further overheating will cause the temperatur e gauge to pass ⬙ H. ⬙ In this case, the indicat[...]

7. T urn Signal Indicator Light The left or right arrow will flash in unison with the corresponding fr ont and rear turn signal lights when the turn signal switch is operated. NOTE: • A chime will sound if the vehicle is driven more than 1 mi (1.6 km) with either turn signal on. • Check for an inoperative outside light bulb if either indicator [...]

When blinking: The A WD system is temporarily dis- abled due to overload condition. 12. T achometer This gauge measures engine r evolutions per minute (RPM x 1000). Before the pointer r eaches the red ar ea, ease up on the accelerator to prevent engine damage. 13. Shift Lever Indicator The Shift Lever Indicator is self-contained within the instrume[...]

V ehicle Odometer Messages When the appropriate conditions exist, the following messages will display in the odometer: ECO ................... Fuel Saver Indicator Off ECO-on ................. Fuel Saver Indicator On hood ............................ Hood Ajar door ............................. Door Ajar gA TE ........................... Liftgate A[...]

gASCAP Message If the vehicle diagnostic system determines that the fuel filler cap is loose, improperly installed, or damaged, the word “gASCAP” will display in the odometer display area. If this occurs, tighten the fuel filler cap until a “clicking” sound is heard. Then pr ess the TRIP ODOM- ETER button to turn off the message. If the pr [...]

Unless reset, this message will continue to display each time you turn the ignition switch to the ON position. T o turn off the message temporarily , press and r elease the TRIP ODOMETER button on the instr ument cluster . T o reset the oil change indicator system (after performing the scheduled maintenance) perform the following pro- cedure: 1. T [...]

Also, have the system checked by an authorized dealer if the light does not turn on during starting. 17. Oil Pressure W arning Light This light shows low engine oil pressur e. The light will turn on and remain on when the ignition switch is turned from the LOCK or ACC position to the ON position. The light will turn off after the engine is started.[...]

20. T rip Odometer / ECO (Fuel Saver Indicator) Button — If Equipped Changing the Display Press this button to change the display fr om odometer to either of two trip odometer settings or the ECO display . The letter “A” or “B” will appear when in the trip odometer mode. Push in and hold the button for two seconds to reset the trip odomet[...]

significantly under-inflated tir e causes the tire to over - heat and can lead to tire failur e. Under-inflation also reduces fuel ef ficiency and tire tr ead life, and may affect the vehicle’s handling and stopping ability . Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver ’s responsibility to mai[...]

CAUTION! The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system opera- tion or sensor damage may result when using re- placement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause se[...]

23. Electronic Stability Program (ESP)/T raction Control System (TCS) Indicator Light If this indicator light flashes during accelera- tion, ease up on the accelerator and apply as little throttle as possible. Adapt your speed and driving to the prevailing r oad conditions. 24. Malfunction Indicator Light (MIL) The Malfunction Indicator Light (MIL)[...]

W ARNING! A malfunctioning catalytic converter , as referenced above, can reach higher temperatures than in normal operating conditions. This can cause a fire if you drive slowly or park over flammable substances such as dry plants or wood or cardboard, etc. This could result in death or serious injury to the driver , occu- pants or others. 25. Ele[...]

26. Brake W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, that the brake fluid level is low , or that there is a problem with the anti-lock brake system reservoir . If the light remains on when the p[...]

W ARNING! Driving a vehicle with the red brake light on is dangerous. Part of the brake system may have failed. It will take longer to stop the vehicle. Y ou could have an accident. Have the vehicle checked immediately . V ehicles equipped with the Anti-Lock Brake System (ABS), are also equipped with Electr onic Brake Force Distribution (EBD). In t[...]

29. Electronic V ehicle Information Center (EVIC)/Compass Mini–T rip Computer (CMTC) Display — If Equipped On vehicles equipped with a Premium Cluster , this display shows the Electronic V ehicle Information Center (EVIC) messages when the appropriate conditions exist. Refer to Electronic V ehicle Information Center (EVIC) for further informati[...]

NOTE: The system will display the last known outside temperature when starting the vehicle and may need to be driven several minutes before the updated tempera- ture is displayed. Engine temperatur e can also affect the displayed temperature, ther efore temperatur e readings are not updated when the vehicle is not moving. CMTC Reset Buttons CMTC Re[...]

T rip B Shows the total distance traveled for T rip B since the last reset. ECO (Fuel Saver Indicator) — If Equipped The ECO-ON indicator will illuminate when you are driving in a fuel efficient manner and can be used to modify driving habits in order to incr ease fuel economy . The ECO display will toggle between ECO and ECO-ON depending on driv[...]

T o Set the V ariance Start the engine and leave the transmission gear selector lever in the P ARK position. Press and hold the CMTC reset button (for appr oximately ten seconds) until the current variance zone number is displayed. T o change the zone, press and r elease the CMTC reset button to incr ease the variance one step. Repeat as necessary [...]

3. Release the CMTC reset button, then press and hold again for approximately 10 seconds, until the dir ection is displayed, with the CAL indicator on continuously in the display . 4. T o complete the compass calibration, drive the vehicle in one or more complete 360–degr ee circles, under 5 mph (8 km/h) in an area fr ee from power lines and lar [...]

• System status, including vehicle information warning message displays, and T ire Pressur e Monitor System (TPMS) displays (if equipped) • Personal Settings (Customer-Pr ogrammable Features) The system allows the driver to select information by pressing the following buttons mounted on the steering wheel. Press and r elease this button and the[...]

Press this button to r eset T rip Functions and change Personal Settings. Press this button to scr oll through T rip Func- tions (A verage Fuel Economy , Distance T o Empty [DTE], Elapsed T ime, Units In), System Status Messages, and Personal Settings (Customer-Pr ogrammable Features). Press this button to display the Compass/ Outside T emperature.[...]

• Channel # T ransmit. Refer to “Garage Door Opener” in “Things T o Know Before Starting Y our V ehicle”. • Channel # T raining. Refer to “Garage Door Opener” in “Things T o Know Before Starting Y our V ehicle”. • Channel # T rained. Refer to “Garage Door Opener” in “Things T o Know Before Starting Y our V ehicle”. •[...]

• Coolant Low • Key in Ignition • Lights On • ECO (Fuel Saver Indicator) — If Equipped Oil Change Required Y our vehicle is equipped with an engine oil change indicator system. The “Oil Change Required” message will display in the EVIC for approximately 5 seconds after a single chime has sounded to indicate the next scheduled oil chan[...]

• Elapsed T ime • Units In Press the SCROLL button to cycle through all the T rip Computer functions. The T rip Functions mode displays the following informa- tion. • A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dashes for two seconds. The[...]

• Units In The EVIC, odometer , and navigation system (if equipped) can be changed between English and Metric units of measure. T o make your selection, press and release the RESET button until “U.S.” or “METRIC” appears. T o Reset The Display Reset will only occur while a resettable function is being displayed. Press and r elease the RES[...]

ECO (Fuel Saver Mode) — If Equipped The ECO message will display below the outside tem- perature in the EVIC display . This message will appear whenever you are driving in a fuel ef ficient manner . This feature allows you to monitor when you ar e driving in a fuel efficient manner , and it can be used to modify driving habits in order to incr ea[...]

Compass V ariance Compass V ariance is the difference between magnetic North and geographic North. T o allow the compass module to compensate for that differ ence and ensure accuracy , you can set the variance in the compass module to the zone where the vehicle is located accor ding to the Compass V ariance Map. T o set the variance, perform the fo[...]

3. Press the SCROLL button until “COMP ASS V ARI- ANCE” message and the last variance zone number displays in the EVIC. 4. Press and release RESET button until the pr oper variance zone is selected according to the map. 5. Press and release the COMP ASS/TEMPERA TURE button to exit. Personal Settings (Customer-Programmable Features) Personal Set[...]

“RKE Unlock” When Driver Door 1st Press is selected, only the driver’s door will unlock on the first press of the Remote Keyless Entry (RKE) UNLOCK button. When Driver Door 1st Press is selected, you must pr ess the RKE UNLOCK button twice to unlock the passenger doors and liftgate. When All Doors 1st Press is selected, all doors and the lift[...]

ON. The headlights will also turn off when the wipers ar e turned OFF if they were turned ON by this featur e. T o make your selection, press and r elease the RESET button until “ON” or “OFF” appears. “Key-Off Power Delay” When this feature is selected, the power window switches, radio, Uconnect™ Phone (if equipped), DVD video system [...]

“NA V T urn By T urn” — If Equipped When ON is selected, the T urn-by-T urn directions will appear in the display as the vehicle approaches a desig- nated turn within a programmed r oute. T o make your selection, press and r elease the RESET button until “ON” or “OFF” appears. Compass V ariance Refer to “Compass V ariance” under ?[...]

Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Press the ON/VOLUME contr ol knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping. T urning the ON/VOLUME control knob to the right incr eas[...]

If your vehicle is not equipped with or this feature is not available on your vehicle, a “Not Equipped W ith Uconnect” message will display on the radio screen. TIME Button Press the TIME button to alternate locations of the time and frequency display . Clock Setting Procedure 1. Press and hold the TIME button until the hours blink. 2. Adjust t[...]

Setting the T one, Balance, and Fade Push the rotary TUNE/SCROLL control knob and BASS will display . T urn the TUNE/SCROLL control knob to the right or left to increase or decr ease the bass tones. Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or d[...]

T oggle the MUSIC TYPE button to select the following format types: Program T ype 16-Digit Character Display No program type or undefined None Adult Hits Adlt Hit Classical Classicl Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Program T ype 16[...]

By pressing the SEEK button when the Music T ype icon is displayed, the radio will be tuned to the next frequency station with the same selected Music T ype name. The Music T ype function only operates when in the FM mode. If a preset button is activated while in the Music T ype (Program T ype) mode, the Music T ype mode will be exited and the radi[...]

• Angle – Repeatedly pressing SELECT will change the viewing angle if supported by the DVD disc (if equipped). NOTE: • The available selections for each of the above entries varies depending upon the disc. • These selections can only be made while playing a DVD. • VES™ Power - Allows you to turn VES™ ON and OFF (if equipped). • VES?[...]

Audio Language — If Equipped Selecting this item allows you to choose a default audio language (effective only if the language is supported by the disc). Y ou can select a language not listed by scrolling down and selecting ⬙ other . ⬙ Enter the country code using the TUNE/SCROLL control knob to scr oll up and down to select the number and th[...]

a disc is loaded, changes will not be effective. Also, the defaults are ef fective only if the disc supports the customer-pr eferred settings. AM and FM Buttons Press the buttons to select AM or FM mode. SET Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET button[...]

Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play , DVD-VIDEO) The radio DVD player and many DVD discs are coded by geographic region. These r egion codes must match in order for the disc to play . If the region code for the DVD disc does not match the region code for the radio DVD player , it will not play the disc. Customers may t[...]

Eject Button — Ejecting Compact Disc(s) Press the EJECT button and the pushbutton with the corresponding number (1-6) wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. Press and hold the [...]

Notes On Playing MP3/WMA Files The radio can play MP3/WMA files; however , acceptable MP3/WMA file r ecording media and formats ar e limited. When writing MP3/WMA files, pay attention to the following restrictions. Supported Media (Disc T ypes) The MP3/WMA file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3,WMA, DVD V ideo, DV[...]

If a disc contains multi-formats, such as CD audio and MP3/WMA tracks, the radio will only play the MP3/ WMA tracks on that disc. Supported MP3/WMA File Formats The radio will recognize only files with the *.MP3/WMA extension as MP3/WMA files. Non-MP3/WMA files named with the *.MP3/WMA extension may cause play- back problems. The radio is designed [...]

Playback of MP3/WMA Files When a medium containing MP3/WMA data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3/WMA files. Loading times for playback of MP3/WMA files may be affected by the following: • Media - CD-R W media may take longe[...]

Press and hold the INFO button again for thr ee seconds to return to ⬙ elapsed time ⬙ display . Operation Instructions - Auxiliary Mode The auxiliary (AUX) jack is an audio input jack which allows the user to plug in a portable device such as an MP3/WMA player , cassette player , or microphone and utilize the vehicle’s audio system to amplify[...]

Operating Instructions — V oice Command System (If Equipped) For the radio, refer to “V oice Command” in “Understand- ing The Features Of Y our V ehicle”. For Uconnect™ “V oice Command,” refer to “Uconnect™ Phone” in “Understanding The Features Of Y our V ehicle”. Operating Instructions - Uconnect™ Phone (If Equipped) Re[...]

DTS™ ⬙ DTS™ ⬙ and ⬙ DTS™ 2.0 ⬙ are trademarks of Digital The- ater Systems, Inc. MEDIA CENTER 730N/430 (RER/REN/RBZ) — AM/FM STEREO RADIO AND CD/DVD/HDD/NA V — IF EQUIPPED NOTE: The sales code is located on the lower right side of the unit’s faceplate. The REN, RER and RBZ radios contain a CD/DVD player , USB port, and a 30-giga[...]

3. T o move the hour forward, touch the scr een where the word “Hour” with the arr ow pointing upward is dis- played. T o move the hour backward, touch the screen where the wor d “Hour” with the arrow pointing down- ward is displayed. 4. T o move the minute forward, touch the scr een where the word “Min” with the arr ow pointing upward [...]

Changing the T ime Zone 1. T urn on the radio. 2. T ouch the screen where the time is displayed. The clock setting menu will appear on the screen. 3. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen. 4. Select a time zone by touching the screen where your selection appears[...]

displayed. T o move the minute backward, touch the screen wher e the word “Min” with the arr ow pointing downward is displayed. 6. T o save the new time setting, touch the screen wher e the word “Save” is displayed. Changing Daylight Savings T ime When selected, this feature will display the time of day in daylight savings time. Proceed as [...]

3. T ouch the screen wher e “User Clock” is displayed, the clock setting menu will appear on the screen. 4. T ouch the screen wher e the words “Set T ime Zone” are displayed. The time zone selection menu will appear on the screen. 5. Select a time zone by touching the screen where your selection appears. If you do not see a time zone that y[...]

Power Switch/V olume Control (Rotary) Push the ON/VOLUME control knob to turn on the radio. Push the ON/VOLUME control knob a second time to turn off the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection, without stopping. T urning the ON/VOLUME control knob to the right incr ease[...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next fr equency in the direction of the arr ows. This feature operates in either AM or FM frequencies. TUNE Control T urn the rotary TUNE/SCROLL contr ol knob clockwise to increase or counter clockwise to decrease the fr equency . Setting the T one, Bal[...]

SET/RND Button — T o Set the Pushbutton Memory When you are r eceiving a station that you wish to commit to pushbutton memory , press the SET/RND button. The symbol SET 1 will now show in the display window . Select the button (1 to 6) you wish to lock onto this station and press and r elease that button. If a button is not selected within five s[...]

discs (CD-R W), compact discs with MP3 tracks and multisession compact discs with CD and MP3 tracks. Inserting Compact Disc(s) Gently insert one CD into the CD player with the CD label facing up. The CD will automatically be pulled into the CD player and the CD icon will illuminate on the radio display . If a CD does not go into the slot more than [...]

If you have ejected a disc and have not removed it within 10 seconds, it will be reloaded. If the CD is not r emoved, the radio will reinsert the CD but will not play it. A disc can be ejected with the radio and ignition OFF . NOTE: Ejecting with the ignition OFF is not allowed on convertible or soft-top models (if equipped). SEEK Button Press the [...]

Notes on Playing MP3 Files The radio can play MP3 files; however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tions. Supported Media (Disc T ypes) The MP3 file recor ding media supported by the radio are CDDA, CD-R, CD-R W , MP3, and CDDA+MP3. Supported Medium Format[...]

Discs created with an option such as ⬙ keep disc open after writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.MP3 exten- sion as MP3 files. Non-MP3 files named with the *.MP3 extensi[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

MEDIA CENTER 130 (RES/RSC) — AM/FM STEREO RADIO WITH CD PLA YER (MP3 AUX JACK) AND SIRIUS RADIO NOTE: The radio sales code is located on the lower right side of the radio faceplate. Operating Instructions — Radio Mode NOTE: The ignition switch must be in the ON or ACC position to operate the radio. Power Switch/V olume Control (Rotary) Push the[...]

SEEK Buttons Press and r elease the SEEK buttons to search for the next listenable station in AM/FM mode. Press the right switch to seek up and the left switch to seek down. The radio will remain tuned to the new station until you make another selection. Holding either button will bypass stations without stopping until you release it. V oice Comman[...]

3. After adjusting the hours, press the right side TUNE/ SCROLL control knob to set the minutes. The minutes will begin to blink. 4. Adjust the minutes using the right side TUNE/ SCROLL control knob. Pr ess the TUNE/SCROLL control knob to save time change. 5. T o exit, press any button/knob or wait five seconds. The clock can also be set by pressin[...]

Push the rotary TUNE/SCROLL control knob a second time and MID will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the mid-range tones. Push the rotary TUNE/SCROLL control knob a third time and TREBLE will display . T urn the TUNE/SCROLL control knob to the right or left to incr ease or decrease the trebl[...]

Program T ype 16-Digit Character Display Classic Rock Cls Rock College College Country Country Foreign Language Language Information Inform Jazz Jazz News News Nostalgia Nostalga Oldies Oldies Personality Persnlty Public Public Rhythm and Blues R & B Religious Music Rel Musc Religious T alk Rel T alk Rock Rock Program T ype 16-Digit Character D[...]

SETUP Button Pressing the SETUP button allows you to select between the following items: • Set Clock — Pressing the SELECT button will allow you to set the clock. Adjust the hours by turning the TUNE/SCROLL control knob. After adjusting the hours, press the TUNE/SCROLL control knob to set the minutes. The minutes will begin to blink. Adjust the[...]

Button s1-6 These buttons tune the radio to the stations that you commit to pushbutton memory (12 AM and 12 FM stations). DISC/AUX Button Pressing the DISC/AUX button will allow you to switch from AM/FM modes to DISC/AUX mode. Operation Instructions — CD MODE for CD and MP3 Audio Play NOTE: • The ignition switch must be in the ON or ACC positio[...]

CAUTION! (Continued) • Do not use adhesive labels. These labels can peel away and jam the player mechanism. • RES is a single CD player . Do not attempt to insert a second CD if one is already loaded. • Dual-media disc types (one side is a DVD, the other side is a CD) should not be used, and they can cause damage to the player . EJECT Button [...]

AM/FM Button Press the button to select either AM or FM mode. SET/RND Button (Random Play Button) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. Press the right SEEK button to move to the next ran- domly selected tra[...]

a number instead. W ith a maximum number of files, exceeding 20 folders will result in this display . W ith 200 files, exceeding 50 folders will result in this display .) • Maximum number of characters in file/folder names: • Level 1: 12 (including a separator ⬙ . ⬙ and a three- character extension) • Level 2: 31 (including a separator ?[...]

MPEG Specification Sampling Frequency (kHz) Bit Rate (kbps) MPEG-1 Audio Layer 3 48, 44.1, 32 320, 256, 224, 192, 160, 128, 1 12, 96, 80, 64, 56, 48, 40, 32 MPEG-2 Audio Layer 3 24, 22.05, 16 160, 128, 144, 1 12, 96, 80, 64, 56, 48, 40, 32, 24, 16, 8 ID3 T ag information for artist, song title, and album title are supported for version 1 ID3 tags. [...]

LIST Button (CD Mode for MP3 Play) Pressing the LIST button will bring up a list of all folders on the disc. Scrolling up or down the list is done by turning the TUNE/SCROLL control knob. Selecting a folder by pressing the TUNE/SCROLL control knob will begin playing the files contained in that folder (or the next folder in sequence if the selection[...]

TIME Button (Auxiliary Mode) Press this button to change the display to time of day . The time of day will display for five seconds (when the ignition is OFF). Operating Instructions - Uconnect™ Phone (If Equipped) Refer to “Uconnect™ Phone” in “Understanding The Features If Y our V ehicle”. Operating Instructions - Uconnect™ Multimed[...]

An auxiliary input jack permits passengers to listen to a portable MP3 player through the vehicle’s speakers. For vehicles equipped with the V ideo Entertainment System (VES)™, separate audio outputs allow passengers to listen to the vehicle speakers while differ ent audio tracks play through the system’s wir eless headphones. This means rear[...]

Changing the T ime Zone NOTE: Y ou can skip Steps 2 and 3 by pressing and holding the “TIME” button on the radio for three sec- onds. 1. T urn on the multimedia system. 2. Press and release the “SETUP” button on the radio. 3. If “T ime Setup” is highlighted on the menu, press and release the joystick in the center of the radio. Otherwis[...]

3. If “T ime Setup” is highlighted on the menu, press and release the joystick in the center of the radio. Otherwise, turn the knob surrounding the joystick to select “T ime Setup,” and then press and r elease the joystick. 4. T urn the knob surrounding the joystick to scr oll to “Daylight Savings,” and then press and r elease the joyst[...]

5. T urn the knob surrounding the joystick to select “Set Hours,” and then press and r elease the joystick. 6. T urn the knob surrounding the joystick to set the hour highlighted on the clock on the screen. Pr ess and release the joystick when done. 7. T urn the knob surrounding the joystick to select “Set Minutes,” and then press and r ele[...]

Uconnect™ Multimedia (SA TELLITE RADIO) — IF EQUIPPED (REN/REQ/RER/RES/REU/RBZ RADIOS ONL Y) Satellite radio uses direct satellite-to-r eceiver broadcast- ing technology to provide clear digital sound, coast to coast. The subscription service provider is Sirius Satellite Radio. This service offers over 130 channels of music, sports, news, enter[...]

Sirius ID number will display . The Sirius ID number display will time out in two minutes. Press any button on the radio to exit this screen. ESN/SID Access W ith REN/RER/RBZ Radios While in SA T mode, press the MENU button on the radio faceplate. Next, touch the SUBSCRIPTION tab on the touch screen. All the ESNs that apply to your vehicle will dis[...]

• Dense tree coverage may interr upt reception in the form of short audio mutes. • Driving under wide bridges or along tall buildings can cause intermittent reception. • Placing objects over or too close to the antenna can cause signal blockage. Operating Instructions — Uconnect™ Multimedia (Satellite) Mode NOTE: The ignition switch must [...]

R W/FF Pressing the R W (Rewind) or FF (Fast Forward) buttons causes the tuner to search for the next channel in the direction of the arr ows. TUNE Control (Rotary) T urn the rotary TUNE/SCROLL contr ol knob clockwise to increase or counter clockwise to decrease the channel. MUSIC TYPE Button — Except REU Radio Pressing this button once will turn[...]

SETUP Button Pressing the SETUP button allows you to select the following items: • Display Sirius ID number — Press the AUDIO/ SELECT button to display the Sirius ID number . This number is used to activate, deactivate, or change the Sirius subscription. SET Button – T o Set the Pushbutton Memory When you are r eceiving a channel that you wis[...]

Operating Instructions — Video Entertainment System (VES)™ (If Equipped) Refer to separate “V ideo Entertainment System (VES)™ Guide.” Uconnect™ Multimedia (SIRIUS BACKSEA T TV™) — IF EQUIPPED Satellite video uses direct satellite r eceiver broadcasting technology to provide str eaming video. The subscription service provider is SIR[...]

• The LCD Screen swings down fr om the console to allow the rear seat passenger(s) to view the display . • The touch screen radio and DVD player contr ols allow front seat operation for easy setup in the case of younger rear seat passengers. • A battery-power ed infrared r emote control that snaps into a molded compartment in the center conso[...]

UNIVERSAL CONSUMER INTERF ACE (UCI) — IF EQUIPPED NOTE: This section is for sales code RES/REL and REQ/RET radios only with uconnect 威 . For sales code RBZ/REN/REZ touch screen radio and REU/REX/RE1 radio, refer to the separate User’s Manual. This feature allows you to plug an iPod 威 mobile digital device into the vehicle’s sound system t[...]

Play Mode When switched to UCI mode the iPod 威 will be in Play mode. In Play mode, you may use the following buttons on the radio faceplate to control the iPod 威 and display data: T une/Scroll Knob Use the T une/Scroll knob to go to the next or previous track. The T une/Scroll knob functions similar to the scroll wheel on the iPod 威 mobile di[...]

previous track in the list; if you pr ess this button at any other time in the current track it will go back to the beginning of the track. If the right (up) button is pressed during Play mode, it will go to the next track in the list. INFO Button Press the INFO button while a track is playing to see the information (T rack T itle, Artist, Album, e[...]

T une/Scroll Knob In the List mode, the T une/Scroll knob functions in a similar manner as the scroll wheel on the iPod 威 . T urning the T une/Scroll knob clockwise (forwar d) and counterclockwise (backwar d) scrolls thr ough lists, dis- playing the track detail on the radio display . Once you have the track to be played highlighted on the radio [...]

LIST Button Pressing the LIST button will take to the top level menu of the iPod 威 . This takes you to the same top level menu as on your iPod 威 . T urn the T une/Scroll knob to list the top menu item you wish to select and then press the T une/Scroll knob. This will take you to the next sub menu list item of the iPod 威 and you can follow the[...]

Left-Hand Switch Functions for Radio Operation • Press the top of the switch to SEEK the next listenable station up from the curr ent setting. • Press the bottom of the switch to SEEK the next listenable station down from the curr ent setting. • Press the button in the center of the switch to tune to the next preset that you have pr ogrammed.[...]

5. Store the disc in its case after playing. 6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatur es may become too high. NOTE: If you experience difficulty in playing a particu- lar disc, it may be damaged (i.e., scratched, reflective coating removed, a hair , moisture or dew on the disc) oversized, or have prote[...]

Blower Control There ar e four blower speeds. Use this control to r egulate the amount of air forced thr ough the system in any mode you select. The blower speed increases as you move the contr ol clockwise from the of f position. NOTE: For vehicles equipped with Remote Start, the climate controls will not function during Remote Start operation if [...]

closer the control is to a particular mode, the mor e air distribution you receive fr om that mode. Panel Mode Air is directed thr ough the outlets in the instrument panel. These outlets can be adjusted for direction, and turned on or off to contr ol airflow . NOTE: For maximum airflow to the rear , the center instrument panel outlets can be dir ec[...]

A/C button is not pressed. This dehumidifies the air to help dry the windshield. T o improve fuel economy , use these modes only when necessary . Recirculation Control Press this button to choose between outside air intake or recir culation of the air inside the vehicle. A lamp will illuminate when you ar e in RECIRCULA TION mode. Only use the RECI[...]

Air Conditioning Operation Push on this button to engage the Air Conditioning (A/C). A light will illu- minate when the A/C System is en- gaged. NOTE: The air conditioning compressor will not engage until the engine has been running for about 10 seconds. Max A/C For maximum cooling use the A/C and RECIRCULA- TION mode buttons at the same time. Thre[...]

The Three-Zone T emperature Control bottom panel con- trols r ear Heating, V entilation, and Air Conditioning operations. The primary control for the r ear blower is on the front climate control unit located on the instr ument panel. Rear Manual Climate Control (Overhead) The Three-Zone T emperature Control bottom panel has five positions; off, r e[...]

Rear Blower Control The primary control for the r ear blower is on the front climate control unit, located on the instr ument panel. Only when the front contr ol for the rear blower is in the RR position do the second row seat occupants have control of the r ear blower speed. The rear blower contr ol, located in the rear over head console, has an o[...]

When rear contr ols are locked by the fr ont system, the lock symbol on the temperature knob is illuminated, and the rear over head adjustments are inoperable. The rear airflow modes will mirr or the front unit opera- tion. Rear P ANEL mode is automatically selected when the front contr ol is in the P ANEL mode. When the fr ont unit is in BI-LEVEL [...]

• Occupants in the vehicle select AUT O mode operation by a button press on the right r otary knob and a comfort temperature setting using r otary knobs on the control unit. • The system can be controlled manually , if desired. • SYNC feature links the contr ols for all three zones, allowing one comfort setting for the cabin, if desired. The [...]

Three-Zone A TC 1 — System On/Off 7 — Front MODE 2 — Left Front T emperature 8 — RECIRCULA TE 3 — Display Screen 9 — Front DEFROST 4 — Right Front T emperature 10 — Front Blower Speed 5 — Air Conditioning (A/C) On/Off 1 1 — SYNC 6 — AUTO Mode / Blower Three-Zone A TC Lower Control Panel 1 — Rear Blower Speed 4 — Rear A TC [...]

Automatic Operation 1. Press the AUT O button on the Front Upper A TC Panel and the word AUTO will illuminate in the fr ont A TC display , along with three temperatures for driver , front passenger , and rear seats. The system will then automati- cally regulate the amount of airflow . 2. Next, adjust the temperature you would like the system to mai[...]

Manual Operation This system offers a full complement of manual override features. The AUTO symbol in the fr ont A TC display will be turned off when the system is being used in the manual mode. NOTE: Each of these features operate independently from each other . If any one feature is controlled manually , the temperature doors will continue to ope[...]

Floor Mode Air comes from the floor outlets. A slight amount of air is directed thr ough the defrost and side window demister outlets. Mix Mode Air comes from the floor , defrost and side window demist outlets. This mode works best in cold or snowy conditions. It allows you to stay comfort- able, while keeping the windshield clear . Defrost Mode Ai[...]

Recirculation Control When outside air contains smoke, odors, or high humidity , or if rapid cooling is desired, you may wish to recir culate interior air by pressing the RECIRCULA TION mode control button. RECIRCULA TION mode should only be used temporarily . The recirculation symbol will illuminate in the display when this button is selected. Pus[...]

The Three-Zone A TC Climate control is located in the headliner , near the center of the vehicle. The Rear-Zone A TC for the rear passengers is in the overhead console above the second r ow passenger seats. 1. Press the REAR LOCK button on the front lower A TC panel. This turns off the REAR LOCK icon in the r ear temperature knob. 2. Rotate the Rea[...]

NOTE: • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts the temperature, mode and fan speed to pr ovide comfort as quickly as possible. • The temperature can be displayed in English or Metric units by selecting the “Display Units of Measure in” customer-pr ogrammable feature. R[...]

When rear contr ols are locked by the fr ont system, the LOCK symbol on the temperature knob is illuminated and any rear over head adjustments are ignor ed. Rear Mode Control Auto Mode The rear system automatically maintains the corr ect mode and comfort level desired by the r ear seat occu- pants. Headliner Mode Air comes from the outlets in the h[...]

under “Maintenance Procedur es” and to “Fluids, Lubri- cants, and Genuine Parts” in “Maintaining Y our V ehicle” for information pertaining to the cooling system and coolant selection. W inter Operation Use of the air Recirculation mode during W inter months is not recommended because it may cause window fogging. V acation Storage Anyti[...]

Outside Air Intake Make sure the air intake, located dir ectly in front of the windshield, is free of obstr uctions such as leaves. Leaves collected in the air intake may reduce airflow , and if they enter the plenum, they could plug the water drains. In W inter months, make sure the air intake is clear of ice, slush, and snow . A/C Air Filter — [...]

Control Setting Suggestions for V arious W eather Conditions 290 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es .................... 2 9 5 ▫ Automatic T ransaxle .................. 2 9 5 ▫ Normal Starting (T ip Start) ............. 2 9 6 ▫ Extreme Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ............................ 2 9 6 ▫ If Engine Fails T o Start ................ 2 9 6 ▫ After Starti[...]

䡵 All Wheel Drive (A WD) — If Equipped ...... 3 0 6 䡵 Driving On Slippery Surfaces ............. 3 0 6 ▫ Acceleration ........................ 3 0 6 ▫ T raction ........................... 3 0 7 䡵 Driving Through W ater ................. 3 0 7 ▫ Flowing/Rising W ater ................. 3 0 8 䡵 Power Steering ....................... 3[...]

▫ T ire Inflation Pressur es ................ 3 3 5 ▫ Radial-Ply T ires ..................... 3 3 7 ▫ Compact Spare T ire ................... 3 3 7 ▫ T ire Spinning ....................... 3 3 8 ▫ T read W ear Indicators ................. 3 3 9 ▫ Life Of T ire ........................ 3 4 0 ▫ Replacement T ires .................... 3 [...]

䡵 V ehicle Loading ...................... 3 5 9 ▫ V ehicle Certification Label .............. 3 5 9 ▫ Gross V ehicle W eight Rating (GVWR) ...... 3 5 9 ▫ Gross Axle W eight Rating (GA WR) ........ 3 5 9 ▫ Overloading ........................ 3 6 0 ▫ Loading ........................... 3 6 0 䡵 T railer T owing ........................ [...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust the inside and outside mirrors, fasten your seat belt, and if present, instr uct all other occupants to buckle their seat belts. W ARNING! • Never leave children alone in a vehicle. Leaving unattended children in a vehicle is dangerous for a number of reasons. A child or [...]

Normal Starting (Tip Start) NOTE: Normal starting of either a cold or a warm engine is obtained without pumping or pressing the accelerator pedal. Do not press the accelerator . Use the Fob with Integrated Key to briefly turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter motor will continue t[...]

If the engine fails to start after you have followed the “Normal Starting” or “Extreme Cold W eather” proce- dures, it may be flooded. T o clear any excess fuel, push the accelerator pedal all the way to the floor and hold it. Then, turn the ignition switch to the ST AR T position and release it as soon as the starter engages. The starter m[...]

AUTOMA TIC TRANSAXLE CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P ARK, or NEUTRAL [...]

W ARNING! (Continued) • Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into P ARK, remove the key fob from the ignition switch, and apply the parking brake. Once the key fob[...]

2. Insert the key fob into the ignition switch and rotate it to the ON position. 3. Remove the cubby bin liner located in the center console behind the shift lever . 4. Insert a screwdriver or similar small tool into the hole at the front of the cubby bin and push the manual override release lever forwar d. 5. While holding the r elease lever forwa[...]

Gear Ranges P ARK This range supplements the parking brake by locking the transaxle. The engine can be started in this range. Never attempt to use P ARK while vehicle is in motion. Apply parking brake when leaving vehicle in this range. When parking on a flat surface, place the shift lever in the P ARK position first, and then apply the parking bra[...]

REVERSE This range is for moving the vehicle backward. Shift into REVERSE only after the vehicle has come to a complete stop. NEUTRAL This range is used when vehicle is standing for pro- longed periods with engine running. Engine may be started in this range. Set the parking brake if you must leave the vehicle. W ARNING! Do not coast in NEUTRAL and[...]

terrain, traveling into strong head winds or while towing heavy trailers). Under these conditions, using the “3” range will improve performance and extend transaxle life by reducing excessive shifting and heat build-up. “3” (Drive) — Four-Speed T ransaxle This range eliminates shifts into “D” (Overdrive). The transaxle will operate no[...]

continue to operate. This Reset feature allows the vehicle to be driven to an authorized dealer for service without damaging the transaxle. In the event of a momentary problem, the transaxle can be reset to r egain all forward gears by performing the following steps: 1. Stop the vehicle. 2. Shift into P ARK. 3. T urn the ignition switch to the LOCK[...]

and to the right (+) an upshift. The gear position will display in the instrument cluster on the transaxle range indicator . NOTE: In AutoStick 威 mode, the transaxle will only shift up or down when the driver moves the shift lever to the right (+) or left (-). AutoStick 威 is deactivated when the shift lever is moved out of the AutoStick 威 (+/[...]

• Mostly the transaxle will stay in the manually selected ratio, however: − If the system detects powertrain overheating, the transaxle will revert to the automatic shift mode and remain in that mode until the powertrain cools of f. − If the system detects a problem, it will disable the AutoStick 威 mode and the transaxle will return to the [...]

W ARNING! Rapid acceleration on slippery surfaces is dangerous. Unequal traction can cause sudden pulling of the front wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet, mud, loose sand, etc.). T raction When driving on wet or s[...]

Flowing/Rising W ater W ARNING! Do not drive on, or cross, a road or a path where water is flowing and/or rising (as in storm run-off). Flowing water can wear away the road or path’s surface and cause your vehicle to sink into deeper water . Furthermore, flowing and/or rising water can carry your vehicle away swiftly . Failure to follow this warn[...]

CAUTION! • Driving through standing water may cause dam- age to your vehicle’ s drivetrain components. Al- ways inspect your vehicle’ s fluids (i.e., engine oil, transmission, axle, etc.) for signs of contamination (i.e., fluid that is milky or foamy in appearance) after driving through standing water . Do not con- tinue to operate the vehicl[...]

POWER STEERING The standard power steering system will give you good vehicle response and incr eased ease of maneuverability in tight spaces. The system will provide mechanical steering capability if power assist is lost. If for some reason the power assist is interr upted, it will still be possible to steer your vehicle. Under these condi- tions, [...]

Power Steering Fluid Check Checking the power steering fluid level at a defined service interval is not requir ed. The fluid should only be checked if a leak is suspected, abnormal noises are apparent, and/or the system is not functioning as antici- pated. Coordinate inspection ef forts through an autho- rized dealer . CAUTION! Do not use chemical [...]

The foot operated parking brake is located below the lower left corner of the instrument panel. T o apply the park brake, firmly push the park brake pedal fully . T o release the parking brake, pr ess the park brake pedal a second time and let your foot up as you feel the brake disengage. When the parking brake is applied with the ignition switch O[...]

to move the shift lever out of P ARK. The parking brake should always be applied whenever the driver is not in the vehicle. W ARNING! • Never use the P ARK position as a substitute for the parking brake. Always apply the parking brake fully when parked to guard against vehicle movement and possible injury or damage. • Never leave children alone[...]

BRAKE SYSTEM Y our vehicle is equipped with dual hydraulic brake systems. If either of the two hydraulic systems loses normal capability , the remaining system will still function. However , there will be some loss of overall braking effectiveness. This will be evident by increased pedal travel during application and greater pedal for ce requir ed [...]

Anti-Lock Brake System (ABS) This system aids the driver in maintaining vehicle control under adverse braking conditions. The system controls hydraulic brake pressur e to prevent wheel lock-up to help avoid skidding on slippery surfaces during braking. Refer to “Anti-Lock Brake System (ABS)” under “Elec- tronic Brake Contr ol System” in thi[...]

ELECTRONIC BRAKE CONTROL SYSTEM Y our vehicle is equipped with an advanced electronic brake control system commonly r eferred to as ESP . This system includes Anti-Lock Brake System (ABS), Brake Assist System (BAS), T raction Control System (TCS), Electronic Roll Mitigation (ERM), and Electr onic Stability Program (ESP). These systems work together[...]

These are all normal characteristics of ABS. W ARNING! • The ABS contains sophisticated electronic equip- ment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interference can cause possible loss of anti-lock braking capa- bility . Installation of such equipment should be pe[...]

All vehicle wheels and tires must be the same size and type and tires must be pr operly inflated to produce accurate signals for the computer . Anti-Lock Brake Light The Anti-Lock Brake Light monitors the ABS. The light will turn on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS Light r[...]

W ARNING! BAS cannot prevent the natural laws of physics from acting on the vehicle, nor can it increase the traction afforded by prevailing road conditions. BAS cannot prevent accidents, including those resulting from excessive speed in turns, driving on very slippery surfaces, or hydroplaning. Only a safe, attentive, and skillful driver can preve[...]

driving maneuvers. It cannot prevent wheel lift due to other factors, such as road conditions, leaving the r oad- way , or striking objects or other vehicles. W ARNING! Many factors, such as vehicle loading, road condi- tions, and driving conditions, influence the chance that wheel lift or rollover may occur . ERM cannot prevent all wheel lift or r[...]

ESP/TCS Indicator Light The ESP/TCS Indicator Light located in the instrument cluster , starts to flash as soon as the tires lose traction and the ESP system becomes active. The ESP/TCS Indicator Light also flashes when TCS is active. If the ESP/TCS Indicator Light begins to flash during acceleration, ease up on the accelerator and apply as little [...]

should only be turned to “Partial Off” for specific r easons as noted. Refer to “Partial Off” for additional informa- tion. Partial Of f The ESP OFF button is located in the switch bank above the climate Control. T o enter the “Partial Off” mode, momentarily press the ESP OFF button and the ESP/TCS Indicator Light will illuminate. T o t[...]

ESP/BAS W arning Light and ESP/TCS Indicator Light The malfunction indicator for the ESP is com- bined with the BAS indicator . The ESP/BAS Malfunction Indicator Light and the ESP/TCS Indicator Light in the instrument cluster both turn on when the ignition switch is turned to the ON position. They should both turn off with the engine running. If th[...]

NOTE: The TSC is disabled when the ESP system is in the “Partial Off” mode. W ARNING! • TSC cannot stop all trailers from swaying. Always use caution when towing a trailer and follow the tongue weight recommendations. Refer to ”V e- hicle Loading” and “T railer T owing” in “Starting and Operating” for further information. • If T[...]

NOTE: • P (Passenger) - Metric tir e sizing is based on U.S. design standards. P-Metric tir es have the letter “P” molded into the sidewall preceding the size designa- tion. Example: P215/65R15 95H. • European-Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the side[...]

T ire Sizing Chart TIRE SIZING TERMS Size Designation: P = Passenger Car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger Car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary spare tire 31 = Overall diameter in inches (in) 215 = Section width in millimeters (mm[...]

TIRE SIZING TERMS Service Description: 95 = Load Index — A numerical code associated with the maximum load a tire can carry H = Speed Symbol — A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions — The maximum speed corresponding to the speed symbol should [...]

T ire Identification Number (TIN) The TIN may be found on one or both sides of the tire, however , the date code may only be on one side. T ires with white sidewalls will have the full TIN, including the date code, located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle[...]

Tire T erminology and Definitions T erm Definition B-Pillar The vehicle B-Pillar is a structural member of the body located between the front and r ear door (of a four-door vehicle) r unning from the sill to the r oof. Cold T ire Pressure Cold tire inflation pr essure is defined as the tir e pressur e after the vehicle has not been driven for at le[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on the driver’s side B-Pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) total weight your vehicle can carry T ire Placard L[...]

3) tire size designed for your vehicle 4) cold tire inflation pr essures for the fr ont, rear , and spare tir es. Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold [...]

available cargo and luggage load capacity is 650 lbs (295 kg) (since 5 x 150 = 750, and 1400 – 750 = 650 lbs [295 kg]). 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. 6. If your vehicle will be towing a trailer[...]

5 ST ARTING AND OPERA TING 333[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES — GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory [...]

W ARNING! (Continued) • Unequal tire pressures from one side of the ve- hicle to the other can cause the vehicle to drift to the right or left. • Always drive with each tire inflated to the recom- mended cold tire inflation pressure. Economy Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These ab[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure.” Cold tir e inflation pressur e is defined as the tire pr [...]

loading may be requir ed for high-speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could[...]

W ARNING! T emporary use spare tires are for emergency use only . W ith these tires, do not drive more than 50 mph (80 km/h). T emporary-use spare tires have limited tread life. When the tread is worn to the tread wear indicators, the temporary use spare tire needs to be replaced. Be sure to follow the warnings, which apply to your spare. Failure t[...]

Refer to “Freeing A Stuck V ehicle” in “What T o Do In Emergencies” for further information. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure some- one. Do not spin your vehicle’s wheels faster than 30 mph (48 km/h) or for more [...]

Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose con[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change sus- pension dimensions and performance characteris- tics, resulting in changes to steering, handling, and braking of your vehicle. This can cause unpredict- able handling and stress to steeri[...]

TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES Some areas of the country r equire the use of snow tir es during the winter . Standard tir es are of the all season type and satisfy this requir ement as indicated by the M+S designation on the tire[...]

Refer to “Maintenance Schedule” for the proper mainte- nance intervals. More fr equent rotation is permissible if desired. The r easons for any rapid or unusual wear should be corrected prior to r otation being performed. The suggested rotation method is shown in the following diagram. TIRE PRESSURE MONITOR SYSTEM (TPMS) The T ire Pressur e Mon[...]

The TPMS will warn the driver of a low tire pr essure if the tire pr essure falls below the low-pr essure warning limit for any reason, including low temperatur e effects and natural pressur e loss through the tir e. The TPMS will continue to warn the driver of low tire pressur e as long as the condition exists, and will not turn off until the tir [...]

CAUTION! • The TPMS has been optimized for the original equipment tires and wheels. TPMS pressures and warning have been established for the tire size equipped on your vehicle. Undesirable system operation or sensor damage may result when us- ing replacement equipment that is not of the same size, type, and/or style. Aftermarket wheels can cause [...]

• Seasonal temperature changes will af fect tire pr essure, and the TPMS will monitor the actual tire pr essure in the tire. Base System The T ire Pressur e Monitor System (TPMS) uses wireless technology with wheel rim mounted electronic sensors to monitor tire pr essure levels. Sensors, mounted to each wheel as part of the valve stem, transmit t[...]

sequence will repeat, pr oviding the system fault still exists. The T ire Pressur e Monitoring T elltale light will turn off when the fault condition no longer exists. A system fault can occur due to any of the following: 1. Jamming due to electronic devices or driving next to facilities emitting the same Radio Frequencies as the TPMS sensors. 2. I[...]

5. Once you repair or replace the original r oad tire and reinstall it on the vehicle in place of the compact spar e, the TPMS will update automatically and the TPMS T elltale light will turn off, as long as no tire pr essure is below the low-pressur e warning limit in any of the four active road tir es. The vehicle may need to be driven for up to [...]

T ire Pressure Monitoring Low Pressure W arnings The T ire Pressur e Monitoring T elltale light will illuminate in the instrument cluster and a chime will sound when tire pr essure is low in one or more of the four active r oad tires. In addition, the Electronic V ehicle Information Center (EVIC) will display a graphic showing the pressur e values [...]

turn off. The vehicle may need to be driven for up to 20 minutes above 15 mph (25 km/h) in order for the TPMS to receive this information. Check TPMS W arning When a system fault is detected, the T ire Pressur e Moni- toring T elltale light will flash on and off for 75 seconds and then remain on solid. The system fault will also sound a chime. In a[...]

If the ignition switch is cycled, this sequence will repeat, providing the system fault still exists. If the system fault no longer exists, the T ire Pressur e Monitoring T elltale light will no longer flash, and the ⬙ CHECK TPM SYS- TEM ⬙ message will no longer display , and a pressure value will display in place of the dashes. A system fault [...]

75 seconds and then remain on solid, and the EVIC will display a ⬙ CHECK TPM SYSTEM ⬙ message for three seconds and then display dashes (- -) in place of the pressur e value. 5. Once you repair or replace the original r oad tire and reinstall it on the vehicle in place of the compact spar e, the TPMS will update automatically . In addition, the[...]

of premium gasoline is not r ecommended, as it will not provide any benefit over r egular gasoline in these engines. 3.5L Engine The 3.5L engine is designed to meet all emissions regulations and pr ovide satisfac- tory fuel economy and performance when using high-quality unleaded gasoline hav- ing an octane range of 87 to 89. The manu- facturer r e[...]

The manufacturer supports the use of r eformulated gaso- lines. Properly blended r eformulated gasolines will pro- vide excellent performance and durability of engine and fuel system components. Gasoline/Oxygenate Blends Some fuel suppliers blend unleaded gasoline with oxy- genates such as 10% ethanol, MTBE, and ETBE. Oxygen- ates are r equired in [...]

can be used at levels higher than those allowed in the United States. MMT is prohibited in Federal and Califor - nia reformulated gasoline. Materials Added to Fuel All gasoline sold in the United States is requir ed to contain effective deter gent additives. Use of additional detergents or other additives is not needed under normal conditions and t[...]

NOTE: Intentional tampering with the emissions con- trol system can r esult in civil penalties being assessed against you. Carbon Monoxide W arnings W ARNING! Carbon monoxide (CO) in exhaust gases is deadly . Follow the precautions below to prevent carbon monoxide poisoning: (Continued) W ARNING! (Continued) • Do not inhale exhaust gases. They co[...]

ADDING FUEL Fuel Filler Cap (Gas Cap) The gas cap is located behind the fuel filler door on the left side of the vehicle. If the gas cap is lost or damaged, be sure the r eplacement cap has been designed for use with this vehicle. NOTE: When removing the fuel filler cap, lay the cap tether in the hook, located on the fuel filler door rein- forcemen[...]

W ARNING! • Never have any smoking materials lit in or near the vehicle when the gas cap is removed or the tank filled. • Never add fuel to the vehicle when the engine is running. • A fire may result if gasoline is pumped into a portable container that is inside of a vehicle. Y ou could be burned. Always place gas containers on the ground whi[...]

VEHICLE LOADING The load carrying capacity of your vehicle is shown on the “V ehicle Certification Label.” This information should be used for passenger and luggage loading as indicated. Do not exceed the specified Gross V ehicle W eight Rating (GVWR) or the Gross Axle W eight Rating (GA WR). V ehicle Certification Label Y our vehicle has a V e[...]

W ARNING! Because the front wheels steer the vehicle, it is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. Overloading The load carrying components (axle, springs, tires, wheels, etc.) of your vehicl[...]

TRAILER TOWING In this section, you will find safety tips and information on limits to the type of towing you can reasonably do with your vehicle. Before towing a trailer , carefully review this information to tow your load as ef ficiently and safely as possible. T o maintain warranty coverage, follow the requirements and recommendations in this ma[...]

Gross Axle W eight Rating (GA WR) The GA WR is the maximum capacity of the front and r ear axles. Distribute the load over the front and r ear axles evenly . Make sure that you do not exceed either front or rear GA WR. W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if eithe[...]

W eight-Carrying Hitch A weight-carrying hitch supports the trailer tongue weight, just as if it were luggage located at a hitch ball or some other connecting point of the vehicle. These kinds of hitches are the most popular on the market today and they are commonly used to tow small- and medium- sized trailers. W eight-Distributing Hitch A weight-[...]

W ARNING! • An improperly adjusted weight distributing hitch system may reduce handling, stability , braking performance, and could result in an accident. • W eight distributing systems may not be compat- ible with surge brake couplers. Consult with your hitch and trailer manufacturer or a reputable rec- reational vehicle dealer for additional [...]

W ith W eight-Distributing Hitch (Correct) Improper Adjustment of W eight-Distributing Hitch (Incorrect) 5 ST ARTING AND OPERA TING 365[...]

T railer Hitch Classification Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See your authorized dealer for package content. The following chart provides the industry standar d for the maximum trailer weight a given trailer hitch class can tow and shou[...]

T railer T owing Weights (Maximum T railer Weight Ratings) The following chart provides the maximum trailer weight ratings towable for your given drivetrain. Engine/T ransaxle GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 2.4L/Automatic 6,000 lbs (2 722 kg) 22 sq ft (2.0 sq m) 1,000 lbs (454 kg) whic[...]

Engine/T ransaxle GCWR (Gross Com- bined Wt. Rating) Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. 3.5L/Automatic (with T railer T ow Prep Package 8,300 lbs (3 765 kg) 40 sq ft (3.7 sq m) 3,500 lbs (1 588 kg) which includes 1 to 2 persons & Luggage 350 lbs (159 kg) 8,300 lbs (3 765 kg) 40 sq ft (3.7 sq m) 3,000 lbs (1 361 kg) whic[...]

T railer and T ongue Weight Always load a trailer with 60% to 65% of the weight in the front of the trailer . This places 10% to 15% of the Gross T railer W eight (GTW) on the tow hitch of your vehicle. Loads balanced over the wheels or heavier in the rear can cause the trailer to sway severely side to side which will cause loss of control of the v[...]

NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. Also, additional factory-installed options or authorized dealer-installed options must be considered as part of the total load on your vehicle. Refer to the “T ire and Loading Information” placard for the maximum combined weight of occupants and cargo fo[...]

W ARNING! (Continued) • Make certain that the load is secured in the trailer and that it will not shift during travel. When trailering cargo that is not fully secured, dynamic load shifts can occur that may be difficult for the driver to control. Y ou could lose control of your vehicle and have an accident. • When hauling cargo or towing a trai[...]

T owing Requirements – T ires − Do not attempt to tow a trailer while using a compact spare tir e. − Proper tir e inflation pressur es are essential to the safe and satisfactory operation of your vehicle. Refer to “T ires – General Information” in “Starting and Oper- ating” for proper tir e inflation procedur es. − Check the trail[...]

CAUTION! If the trailer weighs more than 1,000 lbs (454 kg) loaded, it should have its own brakes, and they should be of adequate capacity . Failure to do this could lead to accelerated brake lining wear , higher brake pedal effort, and longer stopping distances. W ARNING! • Do not connect trailer brakes to your vehicle’s hydraulic brake lines.[...]

The electrical connections are all complete to the vehicle but you must mate the harness to a trailer connector . Refer to the following illustrations. Four-Pin Connector 1 — Female Pins 4 — Park 2 — Male Pin 5 — Left Stop/T urn 3 — Ground 6 — Right Stop/T urn 374 ST ARTING AND OPERA TING[...]

T owing Tips Before setting out on a trip, practice turning, stopping, and backing up the trailer in an area located away fr om heavy traffic. Automatic T ransaxle The DRIVE range can be selected when towing. How- ever , if frequent shifting occurs while in this range, select the “3” range for four-speed automatic or the “5” range for six-s[...]

“police, taxi, fleet, or frequent trailer towing.” Refer to “Maintenance Schedule” for the proper maintenance intervals. NOTE: Check the four-speed transaxle fluid level befor e towing. The six-speed transaxle is sealed and the fluid level cannot be checked. See your authorized dealer for assistance. Electronic Speed Control – If Equipped[...]

Cooling System T o reduce potential for engine and transaxle overheating, take the following actions: − City Driving When stopped for short periods, shift the transaxle into NEUTRAL and increase engine idle speed. − Highway Driving Reduce speed. − Air Conditioning T urn off temporarily . RECREA TIONAL TOWING (BEHIND MOTORHOME, ETC.) TOWING TH[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher ................ 3 8 0 䡵 If Y our Engine Overheats ................ 3 8 0 䡵 Jacking And T ire Changing ............... 3 8 1 ▫ Jack Location ....................... 3 8 2 ▫ Spare T ire Location ................... 3 8 3 ▫ Preparations For Jacking ............... 3 8 3 ▫ Sp[...]

HAZARD W ARNING FLASHER The Hazard W arning flasher switch is located in the instrument panel switch bank, above the climate contr ols. Press the switch to turn on the Hazar d W arning flasher . When the switch is activated, all directional turn signals will flash on and off to warn oncoming traffic of an emer gency . Press the switch a second time[...]

NOTE: There ar e steps that you can take to slow down an impending overheat condition: • If your air conditioner (A/C) is on, turn it off. The A/C system adds heat to the engine cooling system and turning the A/C off can help remove this heat. • Y ou can also turn the temperature control to maximum heat, the mode control to floor and the blower[...]

W ARNING! (Continued) • Getting under a jacked-up vehicle is dangerous. The vehicle could slip off the jack and fall on you. Y ou could be crushed. Never get any part of your body under a vehicle that is on a jack. Never start or run the engine while the vehicle is on a jack. If you need to get under a raised vehicle, take it to a service center [...]

Spare Tire Location The spare tir e is stowed underneath the rear of the vehicle and is held in place by means of a cable winch mechanism. Preparations For Jacking 1. Park the vehicle on a firm level surface as far from the edge of the roadway as possible, avoid icy or slippery areas. W ARNING! Do not attempt to change a tire on the side of the veh[...]

1. Remove the jack-handle components 1, 2 and 3 from storage and assemble them. NOTE: Assemble components 2 and 3 by seating the small ball at the end of component 2 in the small hole at the end of component 3. This will lock these components together . Assemble components 1 and 2 so that the wheel nut socket at the end of component 1 faces upward [...]

Spare Tire Stowage NOTE: On seven-passenger models, fold the third-r ow passenger seats flat. This will provide mor e space when accessing the jacking tools and when operating the winch mechanism. 1. Remove the jack-handle components 1, 2, and 3 from storage and assemble them. NOTE: Assemble components 2 and 3 by seating the small ball at the end o[...]

nut socket at the end of component 1 faces upward when seated on component 2. This will make it easier to rotate the assembly when operating the winch mechanism. 2. Fit the assembled jack-handle over the winch drive nut located in the jack storage area. Rotate the jack- handle assembly counterclockwise until ther e is enough cable slack to allow yo[...]

5. Fit the assembled jack-handle over the winch drive nut. Rotate the jack-handle assembly clockwise to raise the spare tir e into the storage area. Continue to r otate the jack-handle assembly until you hear the winch mecha- nism click three times. It cannot be over tightened. Push against the tire several times to be sur e it is held securely in [...]

W ARNING! (Continued) • T o assure that spare tires, flat or inflated, are securely stowed, spares must be stowed with the valve stem facing the ground. • T urn on the Hazard W arning flasher . 1. Remove the spare tire, jack, and jack-handle fr om stowage. 2. Loosen, but do not remove, the wheel nuts on the wheel with the flat tire. T urn the w[...]

4. Raise the vehicle by turning the jack screw clockwise with the jack handle. Raise the vehicle until the tire just clears the road surface and enough clearance is obtained to install the spare tir e. Minimum tire lift pr ovides maximum stability . W ARNING! Raising the vehicle higher than necessary can make the vehicle less stable. It could slip [...]

NOTE: For vehicles so equipped, the wheel cover is held on the wheel by the wheel nuts. When reinstalling the original wheel, properly align the wheel cover to the valve stem, place the wheel cover onto the wheel, and then install the wheel nuts. 6. Install the spare tire. NOTE: • For vehicles so equipped, do not attempt to install a center cap o[...]

W ARNING! A loose tire or jack, thrown forward in a collision or hard stop could endanger the occupants of the ve- hicle. Always stow the jack parts and the spare tire in the places provided. Have the deflated (flat) tire repaired or replaced immediately . 1 1. Place the deflated (flat) tir e in the cargo ar ea. Do not stow the deflated tire in the[...]

JUMP-ST ARTING If your vehicle has a discharged battery it can be jump- started using a set of jumper cables and a battery in another vehicle or by using a portable battery booster pack. Jump-starting can be dangerous if done impr operly so please follow the procedur es in this section carefully . NOTE: When using a portable battery booster pack fo[...]

Preparations for Jump-Start The battery in your vehicle is located between the left front headlight assembly and the left fr ont wheel splash shield. T o allow jump-starting there are r emote battery posts located on the left side of the engine compartment. Remote Battery Posts 1 — Remote Positive (+) Post (covered with protective cap) 2 — Remo[...]

W ARNING! • T ake care to avoid the radiator cooling fan when- ever the hood is raised. It can start anytime the ignition switch is on. Y ou can be injured by moving fan blades. • Remove any metal jewelry such as watch bands or bracelets that might make an inadvertent electrical contact. Y ou could be seriously injured. • Batteries contain su[...]

W ARNING! Do not allow vehicles to touch each other as this could establish a ground connection and personal injury could result. Jump-Starting Procedure W ARNING! Failure to follow this procedure could result in per- sonal injury or property damage due to battery ex- plosion. CAUTION! Failure to follow these procedures could result in damage to th[...]

5. Start the engine in the vehicle that has the booster battery , let the engine idle a few minutes, and then start the engine in the vehicle with the discharged battery . Once the engine is started, remove the jumper cables in the reverse sequence: 6. Disconnect the negative (-) jumper cable from the remote negative (-) post of the vehicle with th[...]

front wheels. Then shift back and forth between RE- VERSE and 1st gear . Using the least accelerator pedal pressur e to maintain the rocking motion without spin- ning the wheels is most effective. NOTE: If your vehicle is equipped with T raction Con- trol, turn the system OFF befor e attempting to “rock” the vehicle. Refer to “Electr onic Sta[...]

TOWING A DISABLED VEHICLE Without The Ignition Key Front Wheel Drive (FWD) Special care must be taken when the vehicle is towed with the ignition in the LOCK position. Flatbed towing is the preferr ed towing method. However , if a flatbed towing vehicle is not available, a wheel lift towing vehicle may be used. Furthermore, r ear towing is not reco[...]

CAUTION! (Continued) • Do not attempt to tow this vehicle from the front with sling-type towing equipment. Damage to the front fascia will result. • Do not push or tow this vehicle with another vehicle as damage to the bumper fascia and trans- axle may result. If you must use the accessories (wipers, defrosters, etc.) while being towed, the key[...]

• The distance to be traveled must not exceed 15 miles (25 km). • The towing speed must not exceed 25 mph (40 km/h), and both front and r ear wheels must be on the ground. CAUTION! Exceeding these towing limits may cause a transaxle failure. Such damage is not covered by the New V ehicle Limited W arranty . If the transaxle is not operative, or[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 Engine Compartment — 2.4L ............. 4 0 3 䡵 Engine Compartment — 3.5L ............. 4 0 4 䡵 Onboard Diagnostic System — OBD II ...... 4 0 5 ▫ Loose Fuel Filler Cap Message ........... 4 0 5 䡵 Emissions Inspection And Maintenance Programs ............................ 4 0 6 䡵 Replacement Part[...]

▫ Exhaust System ..................... 4 2 1 ▫ Cooling System ..................... 4 2 3 ▫ Brake System ....................... 4 2 9 ▫ Automatic T ransaxle .................. 4 3 1 ▫ Appearance Care And Protection Fr om Corrosion .......................... 4 3 4 ▫ Cleaning The Cupholders .............. 4 3 9 䡵 Fuses ................[...]

ENGINE COMP ARTMENT — 2.4L 1 — Engine Coolant Reservoir 7 — T otally Integrated Power Module (TIPM) 2 — Power Steering Fluid Reservoir 8 — Automatic T ransaxle Dipstick 3 — Engine Oil Fill 9 — W asher Fluid Reservoir 4 — Brake Fluid Reservoir 10 — Coolant Pressur e Cap 5 — Remote Jump Start (Positive Battery Post) 1 1 — Engine[...]

ENGINE COMP ARTMENT — 3.5L 1 — Engine Coolant Reservoir 6 — T otally Integrated Power Module (TIPM) 2 — Power Steering Fluid Reservoir 7 — Air Cleaner Filter 3 — Brake Fluid Reservoir 8 — W asher Fluid Reservoir 4 — Remote Jump Start (Positive Battery Post) 9 — Engine Oil Dipstick 5 — Remote Jump Start (Negative Battery Post) 10[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated Onboard Diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transaxle control systems. When these systems ar e oper- ating properly , your vehicle will provide excellent per - formance and fuel economy , as w[...]

A loose, impr operly installed, or damaged fuel filler cap may also turn on the MIL. EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS In some localities, it may be a legal requir ement to pass an inspection of this vehicle’s emissions control system. Failure to pass could pr event vehicle registration. For states that requir e an Inspection and Main[...]

the ignition key or start the engine. This means that the vehicle’s OBD II system is not ready and you should not proceed to the I/M station. b. The MIL will not flash at all and will r emain fully illuminated until you turn OFF the ignition key or start the engine. This means that the vehicle’s OBD II system is ready , and you can proceed to t[...]

NOTE: Intentional tampering with emissions control systems may void your warranty and could result in civil penalties being assessed against you. W ARNING! Y ou can be badly injured working on or around a motor vehicle. Only do service work for which you have the knowledge and the proper equipment. If you have any doubt about your ability to perfor[...]

CAUTION! (Continued) • Y our vehicle has been built with improved fluids that protect the performance and durability of your vehicle and also allow extended maintenance intervals. Do not use chemical flushes in these components as the chemicals can damage your engine, transaxle, power steering or air condition- ing. Such damage is not covered by [...]

CAUTION! Do not overfill the engine. Overfilling the engine will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil The oil change indicator system will remind you that it is time to take your vehicle in for scheduled maintenance. Refer to “Maintenance Sc[...]

Engine Oil V iscosity (SAE Grade) – 2.4L Engine SAE 5W -20 engine oil is recommended for all operating temperatures. This engine oil impr oves low temperature starting and vehicle fuel economy . The engine oil filler cap also shows the recommended engine oil viscosity for your engine. For information on the engine oil filler cap location, refer t[...]

Disposing of Used Engine Oil and Oil Filters Care should be taken in disposing of used engine oil and oil filters from your vehicle. Used oil and oil filters, indiscriminately discarded, can pr esent a problem to the environment. Contact your authorized dealer , service station, or governmental agency for advice on how and where used oil and oil fi[...]

used to assure most ef ficient service. MOP AR 威 engine air cleaner filters are a high quality filter and ar e recommended. Maintenance-Free Battery Y ou will never have to add water , nor is periodic main- tenance requir ed. NOTE: The battery is stored in a compartment that is located behind the left front fender and is accessible through the wh[...]

CAUTION! • It is essential when replacing the cables on the battery that the positive cable is attached to the positive post and the negative cable is attached to the negative post. Battery posts are marked posi- tive (+) and negative (-) and identified on the battery case. Cable clamps should be tight on the terminal posts and free of corrosion.[...]

W ARNING! • Use only refrigerants and compressor lubricants approved by the manufacturer for your air condi- tioning system. Some unapproved refrigerants are flammable and can explode, injuring you. Other unapproved refrigerants or lubricants can cause the system to fail, requiring costly repairs. Refer to W arranty Information Book, located on t[...]

The A/C air filter is located in the fresh air inlet behind the glove box. Perform the following steps to replace the filter: 1. Open the glove box and remove all contents. 2. Push the retaining tab on each side of the glove box inward while gently pulling the glove box door outwar d until both tabs clear the door opening in the instrument panel. 3[...]

5. Remove the A/C air filter by pulling it straight out of the housing. 6. Install the A/C air filter with the arr ow on the filter pointing toward the floor . When installing the filter cover , make sure the r etaining tabs fully engage the cover . CAUTION! The A/C air filter is labeled with an arrow to indicate airflow direction through the filte[...]

grit; after lubricating excess oil and grease should be removed. Particular attention should also be given to hood latching components to ensure pr oper function. When performing other underhood services, the hood latch, release mechanism and safety catch should be cleaned and lubricated. The external lock cylinders should be lubricated twice a yea[...]

Rear W iper Removal/Installation 1. Lift the pivot cap on the rear wiper arm upward, this will allow the rear wiper blade to be raised of f of the liftgate glass. NOTE: The rear wiper arm cannot be raised fully upward unless the pivot cap is raised first. 2. Lift the rear wiper arm upwar d to raise the wiper blade off of the liftgate glass. 3. Grab[...]

4. Install the wiper blade pivot pin into the wiper blade holder at the end of the wiper arm, and firmly press the wiper blade until it snaps into place. 5. Lower the wiper blade and snap the pivot cap into place. Adding W asher Fluid The windshield washer and the rear window washer share the same fluid r eservoir . The fluid reservoir is located i[...]

Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. Whenever a change is noticed in the sound of the exhaust system, when exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged, have a competent technician inspect th[...]

Under normal operating conditions, the catalytic con- verter will not requir e maintenance. However , it is im- portant to keep the engine properly tuned to assur e proper catalyst operation and pr event possible catalyst damage. CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the [...]

T o minimize the possibility of catalyst damage: • Do not shut OFF the engine or interrupt the ignition when the transaxle is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any ignition coil connec- tors disconnected for prolonged periods. Cooling System W[...]

Check the coolant recovery bottle tubing for brittle r ub- ber , cracking, tears, cuts, and tightness of the connection at the bottle and radiator . Inspect the entire system for leaks. Cooling System – Drain, Flush and Refill Refer to “Maintenance Schedule” for further information. If the engine coolant (antifreeze) is dirty or contains a co[...]

CAUTION! (Continued) • This vehicle has not been designed for use with propylene glycol-based engine coolant (anti- freeze). Use of propylene glycol-based engine coolant (antifreeze) is not recommended. Adding Coolant Y our vehicle has been built with an improved engine coolant (antifreeze) that allows extended maintenance intervals. This engine [...]

Please note that it is the owner’s responsibility to main- tain the proper level of pr otection against freezing ac- cording to the temperatur es occurring in the area wher e the vehicle is operated. NOTE: Mixing engine coolant (antifreeze) types will decrease the life of the engine coolant (antifr eeze) and will requir e more fr equent engine co[...]

Disposal of Used Coolant Used ethylene glycol-based engine coolant (antifreeze) is a regulated substance r equiring proper disposal. Check with your local authorities to determine the disposal rules for your community . T o prevent ingestion by ani- mals or children, do not stor e ethylene glycol-based engine coolant (antifreeze) in open containers[...]

humidity accumulating on the radiator and being vapor- ized when the thermostat opens, allowing hot engine coolant (antifreeze) to enter the radiator . If an examination of your engine compartment shows no evidence of radiator or hose leaks, the vehicle may be safely driven. The vapor will soon dissipate. • Do not overfill the coolant recovery bo[...]

Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Refer to “Maintenance Schedule” for further information. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abnormally hi[...]

W ARNING! • Use only manufacturer’s recommended brake fluid. Refer to “Fluids, Lubricants, and Genuine Parts” in “Maintaining Y our V ehicle” for further information. Using the wrong type of brake fluid can severely damage your brake system and/or impair its performance. The proper type of brake fluid for your vehicle is also labeled on[...]

W ARNING! (Continued) • Do not allow petroleum based fluid to contami- nate the brake fluid. Brake seal components could be damaged, causing partial or complete brake failure. This could result in an accident. Automatic T ransaxle The automatic transaxle and differ ential assembly are contained within a single housing. The fluid level in the auto[...]

7. W ipe the dipstick clean and reinsert until seated. Then, remove dipstick and note the r eading. a. If the fluid is hot, the r eading should be in the crosshatched ar ea marked “HOT” (between the upper two holes in the dipstick). b. If the fluid is cold, the fluid level should be between the lower two holes in the area marked “COLD.” If [...]

Fluid Level Check – 3.5L Engine The automatic transaxle has no dipstick and is dealer serviced only . Fluid and Filter Changes Refer to “Maintenance Schedule” for further information. In addition, change the fluid and filter if the transaxle is disassembled for any reason. Selection of Lubricant It is important that the proper lubricant is us[...]

Appearance Care and Protection from Corrosion Protection of Body and Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice and those that are sprayed on trees and r oad surfaces during other seasons are highly corrosive to the metal in your vehicl[...]

• Use a high quality cleaner wax, such as MOP AR 威 Cleaner W ax to remove road film, stains and to pr otect your paint finish. T ake care never to scratch the paint. • A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! Do not use abrasive or strong cleaning materials such as st[...]

• Use MOP AR 威 T ouch Up Paint or equivalent on scratches as soon as possible. Y our authorized dealer has touch up paint to match the color of your vehicle. Wheel and Wheel T rim Care All wheels and wheel trim, especially aluminum and chrome-plated wheels should be cleaned r egularly with a mild soap and water to prevent corr osion. T o remove[...]

Interior Care Instrument Panel Cover The instrument panel cover has a low glar e surface, which minimizes reflections in the windshield. Do not use protectants or other pr oducts, which may cause undesirable reflections. Use soap and warm water to restor e the low glare surface. Cleaning Interior T rim Interior T rim should be cleaned starting with[...]

Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and ther efore differ ent lens cleaning procedur es must be followed. T o minimize the possibility of scratching the lenses and reducing light output, avoid wiping with [...]

Seat Belt Maintenance Do not bleach, dye, or clean the belts with chemical solvents or abrasive cleaners. This will weaken the fabric. Sun damage can also weaken the fabric. If the belts need cleaning, use a mild soap solution or lukewarm water . Do not remove the belts fr om the car to wash them. Replace the belts if they appear frayed or worn or [...]

CAUTION! • When installing the power module cover , it is important to ensure the cover is properly posi- tioned and fully latched. Failure to do so may allow water to get into the TIPM, and possibly result in an electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the correct amperage rating. The [...]

Cavity Cartridge Fuse Mini- Fuse Description J7 30 Amp Pink — Anti-Lock Brake Sys- tem (ABS) V alve/ Electronic Stability Program (ESP) J8 40 Amp Green — Power Memory Seat – If Equipped J9 40 Amp Green — Flex Fuel/PZEV Mo- tor – If Equipped J10 30 Amp Pink — (If Equipped) Head- lamp W asher Relay- (BUX), Manifold T un- ing V alve J1 1 3[...]

Cavity Cartridge Fuse Mini- Fuse Description J22 25 Amp Natural — Sunroof Module – If Equipped M1 — 15 Amp Blue Center High Mounted Stop Light (CHMSL) M2 — 20 Amp Y ellow T railer Lights – If Equipped M3 — 20 Amp Y ellow Front/Rear Axle, A WD Mod M4 — 10 Amp Red T railer T ow – If Equipped M5 — 25 Amp Natural Power Inverter – If[...]

Cavity Cartridge Fuse Mini- Fuse Description M10 — 15 Amp Blue V anity Lamps/ Hands-Free Module (HFM) – If Equipped, Remote Display – If Equipped, Satellite Digital Audio Re- ceiver (SDARS) – If Equipped, Universal Garage Door Opener (UGDO) – If Equipped, V anity Light, V ideo Enter- tainment System (VES)™ – If Equipped M1 1 — 10 Am[...]

Cavity Cartridge Fuse Mini- Fuse Description M16 — 10 Amp Red Occupant Restraint Controller (ORC)/ Occupant Classifica- tion Module (OCM) M17 — 15 Amp Blue Left Park/Side Marker/Running/T ail Lights, License Lights M18 — 15 Amp Blue Right Park/Side Marker/Running/T ail Lights M19 — 25 Amp Natural Auto Shut Down (ASD) #1 and #2 Cavity Cartri[...]

Cavity Cartridge Fuse Mini- Fuse Description M25 — 20 Amp Y ellow Fuel Pump/Diesel Lift Pump M26 — 10 Amp Red Power MIRRORS Switch/Drivers W in- dow Switch M27 — 10 Amp Red Steering Column Lock, W ireless Igni- tion Node (WIN)/ PEM M28 — 10 Amp Red NGC (Powertrain Control Module)/ T ransmission Feed (Batt) M29 — 10 Amp Red Occupant Classi[...]

Cavity Cartridge Fuse Mini- Fuse Description M34 — 10 Amp Red Power Assist Module, HV AC Module, Head- lamp W ashers, Com- pass Module – If Equipped, Flashlight – If Equipped, RAD Fan Diesel M35 — 10 Amp Red Heated Mirrors – If Equipped M36 — 20 Amp Y ellow Power Outlet #3 (Batt) M37 — 10 Amp Red Anti-Lock Brake Sys- tem (ABS), Electr[...]

K8 — — — K9 — — Rear Blower Relay K10 — — ASD Relay (Feed for M19 and M21) K1 1 — — Radiator Fan Relay Low Speed VEHICLE STORAGE If you will not be using your vehicle for more than 21 days you may want to take steps to preserve your battery . Y ou may: • Remove the IOD (Ignition Off-Draw) mini-fuses fr om the T otally Integrated[...]

LIGHTS BULBS – Exterior Bulb No. Low Beam Headlamp ..................... 9006 High Beam Headlamp .................... 9005 Front Park/T urn Signal ................. 3757AK Side Marker Lamp ........................ 1 6 8 Front Fog Lamp ...................... PSX24W Center High Mounted Stop Lamp (CHMSL) ............................. L E D (Serviced[...]

3. Disconnect the bulb from the harness connector and then connect the replacement bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with any oily surface, clean the bulb with rubbing alcohol. 4. Install the bulb and connector assembly into the headlamp housin[...]

2. Remove the electrical connector from the fog lamp housing. 3. Remove the bulb from the connector socket and install the replacement bulb. CAUTION! Do not touch the new bulb with your fingers. Oil contamination will severely shorten bulb life. If the bulb comes in contact with an oily surface, clean the bulb with rubbing alcohol. 4. Install the b[...]

Changing the T ail/Stop/Rear T urn Signal Lamp 1. Open the liftgate. 2. Remove the two fasteners from the inboard side of the taillamp housing. 3. Carefully insert a trim stick (plastic flat-blade tool) between the body panel and the outboard side of the taillamp housing with one hand and grasp the flange on the inboard side of the taillamp housing[...]

4. Rotate the applicable bulb’s electrical connector 1 ⁄ 4 turn counterclockwise and r emove it from the housing. 5. Remove the bulb from the connector socket and install the replacement bulb. 6. Install the bulb and connector assembly into the housing and rotate the connector 1 ⁄ 4 turn clockwise to lock it in place. 7. Reinstall the taillam[...]

License Plate Lamp 1. Push the small locking tab sticking out of the end of the lens toward the side of the vehicle and hold it in that position. 2. Insert a small flat-blade tool between the end of the lens with the locking tab and the surrounding housing and then pivot the tool to separate the lens from the housing. 3. Hold the lens with one hand[...]

FLUID CAP ACITIES U.S. Metric Fuel (Approximate) Front Wheel Drive (FWD) Models with 2.4L PZEV Engine 18.5 Gallons 70 Liters Front Wheel Drive (FWD) Models without 2.4L PZEV and 3.5L En- gine 20.5 Gallons 77.6 Liters All-Wheel Drive Models 21 Gallons 79.8 Liters Engine Oil with Filter 2.4L Engine (SAE 5W -20, API Certified) 4.5 Quarts 4.26 Liters 3[...]

U.S. Metric Cooling System * 2.4L Engine and Single- or Dual-Zone Climate Control System (MO- PA R 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equivalent) 7.9 Quarts 7.5 Liters 2.4L Engine and Three-Zone Climate Control System (MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula or equivalent) 9.8 Quarts 9.3 Liters 3.5L Engine and[...]

FLUIDS, LUBRICANTS, AND GENUINE P ARTS Engine Component Fluid, Lubricant, or Genuine Part Engine Coolant MOP AR 威 Antifreeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hy- brid Organic Additive T echnology) or equivalent. Engine Oil – 2.4L Engine Use API Certified SAE 5W -20 Engine Oil, meeting the requir ements of Chrysler Material Standard M[...]

Chassis Component Fluid, Lubricant, or Genuine Part Automatic T ransaxle MOP AR 威 A TF+4 威 Automatic T ransmission Fluid or equivalent licensed A TF+4 威 product. Power T ransfer Unit (PTU) MOP AR 威 Gear Lubricant 75W -90 or equivalent. Rear Drive Assembly (RDA) MOP AR 威 Gear Lubricant 75W -90 or equivalent. Brake Master Cylinder MOP AR ?[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emissions Control System Maintenance ...... 4 6 0 䡵 Maintenance Schedule .................. 4 6 0 ▫ Required Maintenance Intervals .......... 4 6 2 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSIONS CONTROL SYSTEM MAINTENANCE The Scheduled Maintenance services listed in bold type, must be done at the times or mileages specified to ensure the continued proper functioning of the Emissions Con- trol System. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliabili[...]

if it has been 6 months since your last oil change even if the oil change indicator message is NOT illumi- nated. • Change your engine oil more often if you drive your vehicle off-r oad for an extended period of time. • Under no circumstances should oil change intervals exceed 6,000 miles (10 000 km) or six months, which- ever comes first. Y ou[...]

• Check all lights and other electrical items for correct operation. At Each Oil Change • Change the engine oil filter . • Inspect the brake hoses and lines. CAUTION! Failure to perform the required maintenance items may result in damage to the vehicle. Required Maintenance Intervals Refer to the Maintenance Schedules on the following pages f[...]

6,000 Miles (10,000 km) or 6 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 12,000 Miles (20,000 km) or 12 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tir[...]

18,000 Miles (30,000 km) or 18 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 24,000 Miles (40,000 km) or 24 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

30,000 Miles (50,000 km) or 30 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.4L Engine). Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 36,000 Miles (60,000 km) or 36 Months Main[...]

42,000 Miles (70,000 km) or 42 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 48,000 Miles (80,000 km) or 48 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate t[...]

54,000 Miles (90,000 km) or 54 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 60,000 Miles (100,000 km) or 60 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate [...]

66,000 Miles (1 10,000 km) or 66 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 72,000 Miles (120,000 km) or 72 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotat[...]

78,000 Miles (130,000 km) or 78 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 84,000 Miles (140,000 km) or 84 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate[...]

90,000 Miles (150,000 km) or 90 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the engine air cleaner filter . ❏ Replace the spark plugs (2.4L Engine). ❏ Inspect and replace PCV valve if necessary .† Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrys[...]

102,000 Miles (170,000 km) or 102 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. ❏ Replace the spark plugs (3.5L Engine). ❏ Replace the timing belt (3.5L Engine). ❏ Flush and replace the engine coolant. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Deale[...]

1 14,000 Miles (190,000 km) or 1 14 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 120,000 Miles (200,000 km) or 120 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ [...]

126,000 Miles (210,000 km) or 126 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 132,000 Miles (220,000 km) or 132 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Ro[...]

138,000 Miles (230,000 km) or 138 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Rotate tires. Odometer Reading Date Repair Order # Dealer Code Signature Authorized Chrysler Dealer 144,000 Miles (240,000 km) or 144 Months Maintenance Service Schedule ❏ Change the engine oil and engine oil filter . ❏ Ro[...]

† This maintenance is recommended by the manufactur er to the owner , but is not requir ed to maintain emissions warranty . W ARNING! • Y ou can be badly injured working on or around a motor vehicle. Do only service work for which you have the knowledge and the right equipment. If you have any doubt about your ability to perform a service job, [...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V ehicle .............................. 4 7 9 ▫ Prepar e For The Appointment ........... 4 7 9 ▫ Prepar e A List ...................... 4 7 9 ▫ Be Reasonable W ith Requests ............ 4 7 9 䡵 If Y ou Need Assistance ................. 4 7 9 ▫ Chrysl[...]

䡵 Publication Order Forms ................ 4 8 3 䡵 Department Of T ransportation Uniform T ire Quality Grades ........................ 4 8 5 ▫ T readwear ......................... 4 8 5 ▫ T raction Grades ..................... 4 8 5 ▫ T emperature Grades .................. 4 8 6 478 IF YOU NEED CONSUMER ASSIST ANCE[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty . Discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

This is why you should always talk to an authorized dealer’s service manager first. Most matters can be re- solved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the authorized dealer- ship. They want to know if you need assistance. • If an authorized dealership is unable to resol[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impaired customer , who has access to a TDD or a conventional teletypewriter (TTY) in the[...]

has also made a major investment in facilities, tools, and training to assure that you ar e absolutely delighted with the ownership experience. Y ou’ll be pleased with their sincere ef forts to resolve any warranty issues or r elated concerns. W ARNING! Engine exhaust, some of its constituents, and certain vehicle components contain, or emit, che[...]

If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may or der a recall and r emedy campaign. However , NHTSA cannot become involved in individual problems between you, your authorized dealer , and the manufacturer . T o contact NHTSA, you may either call the Aut[...]

vehicle, system, and/or components is written in straightforward language with illustrations, diagrams, and charts. • Diagnostic Procedure Manuals Diagnostic Procedur e Manuals are filled with dia- grams, charts and detailed illustrations. These practi- cal manuals make it easy for students and technicians to find and fix problems on computer -co[...]

DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following tire grading categories wer e established by the National Highway T raffic Safety Administration. The specific grade rating assigned by the tire’s manufactur er in each category is shown on the sidewall of the tires on your vehicle. All passenger car tires must conform to F[...]

T emperature Grades The temperature grades ar e A (the highest), B, and C, repr esenting the tire’s r esistance to the generation of heat and its ability to dissipate heat, when tested under controlled conditions on a specified indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and r educe ti[...]

INDEX 10[...]

About Y our Brakes .................... 3 1 1,314 ABS (Anti-Lock Brake System) ......... 191,315,316 Adding Engine Coolant (Antifreeze) .......... 4 2 5 Adding Fuel ........................... 3 5 7 Adding W asher Fluid ..................... 4 2 0 Additives, Fuel ......................... 3 5 5 Air Cleaner , Engine (Engine Air Cleaner Filter) . . .[...]

Auto Unlock, Doors ....................... 3 0 Automatic Dimming Mirror ................. 9 2 Automatic Door Locks ..................... 3 0 Automatic Headlights .................... 1 2 0 Automatic Oil Change Indicator .......... 186,204 Automatic T emperature Control (A TC) ......... 2 7 8 Automatic T ransaxle ................... 298,431 Adding F[...]

Parking ............................. 3 1 1 W arning Light ........................ 1 9 4 Brakes ............................. 314,429 Brake/T ransaxle Interlock .................. 2 9 9 Break-In Recommendations, New V ehicle ........ 8 2 Bulb Replacement ..................... 447,448 Bulbs, Light .......................... 85,447 Calibration, Comp[...]

Check Engine Light (Malfunction Indicator Light) ............... 4 0 6 Checking Y our V ehicle For Safety ............. 8 3 Checks, Safety ........................... 8 3 Child Booster Seat ........................ 7 2 Child Restraint .................. 70,71,74,78,80 Child Restraint T ether Anchors ............. 76,78 Child Safety Locks ..........[...]

Pressur e Cap ......................... 4 2 6 Radiator Cap ......................... 4 2 6 Selection of Coolant (Antifreeze) ...... 424,454,456 T emperature Gauge .................... 1 8 1 Corrosion Pr otection ..................... 4 3 4 Cruise Contr ol (Speed Control) .............. 1 3 2 Cruise Light ........................... 1 8 8 Cupholders[...]

Electrical Outlet, Auxiliary (Power Outlet) ...... 1 4 8 Electrical Power Outlets ................... 1 4 8 Electronic Brake Contr ol System ............. 3 1 6 Anti-Lock Brake System ................. 3 1 5 Brake Assist System .................... 3 1 8 Electronic Roll Mitigation ................ 3 1 9 Electronic Stability Pr ogram ...............[...]

Oil Filter ............................ 4 1 2 Oil Filter Disposal ..................... 4 1 2 Oil Selection ....................... 410,454 Oil Synthetic ......................... 4 1 1 Operation ............................ 8 2 Overheating .......................... 3 8 0 Starting ............................. 2 9 5 T emperature Gauge ............[...]

Brake ............................ 429,457 Cooling System ....................... 4 2 3 Engine Oil ........................... 4 0 9 Power Steering ..................... 3 1 1,457 Fluids ................................ 4 5 6 Fluids, Lubricants and Genuine Parts .......... 4 5 6 Fog Light Service ........................ 4 4 9 Fog Lights ..........[...]

Gauges Coolant T emperature ................... 1 8 1 Fuel ............................... 1 8 1 Odometer ........................... 1 8 4 Speedometer ......................... 1 8 3 T achometer .......................... 1 8 4 Gear Ranges ........................... 3 0 1 Gearshift .............................. 3 0 1 General Information ........[...]

Heater ............................. 271,275 Heater , Engine Block ..................... 2 9 7 High Beam Indicator ..................... 1 8 3 High Beam/Low Beam Select (Dimmer) Switch . . 125 Hitches T railer T owing ........................ 3 6 6 Holder , Coin ........................... 1 5 6 Holder , Cup ........................... 1 5 4 HomeLi[...]

Key , Replacement ........................ 1 6 Key , Sentry (Immobilizer) ................... 1 5 Key-In Reminder ......................... 1 5 Keyless Entry System ...................... 1 9 Keys ................................. 1 2 Knee Bolster .......................... 54,56 Lane Change and T urn Signals .............. 1 2 4 Lap/Shoulder Belts[...]

Electronic Thr ottle Control W arning ......... 1 8 7 Exterior .............................. 8 5 F o g .......................... 123,182,449 Hazard W arning Flasher ................. 3 8 0 Headlight Switch ................... 1 19,120 Headlights ........................ 120,448 Headlights On Reminder ................. 1 2 3 Headlights On W ith W [...]

Locks ................................. 2 8 Auto Unlock .......................... 3 0 Child Protection ........................ 3 2 Door ................................ 2 8 Power Door ........................... 2 9 Low T ire Pressur e System .................. 3 4 3 Lower Anchors and T ether for CHildren (LA TCH) ............................ 76,[...]

Mopar Parts ......................... 407,482 MP3 Player ............................ 2 5 3 MTBE/ETBE ........................... 3 5 4 Multi-Function Control Lever ............... 1 1 9 Navigation Radio (Uconnect 威 gps) ........... 2 5 3 Navigation System (Uuconnect 威 gps) ....... 135,253 New V ehicle Break-In Period ................ 8 2 Occup[...]

Owner’s Manual (Operator Manual) .......... 4 8 3 Paint Care ............................. 4 3 4 Panic Alarm ............................ 2 3 Parking Brake .......................... 3 1 1 Passenger Seat Back T ilt (Easy Entry System) .... 1 1 2 Passing Light ........................... 1 2 5 Personal Settings ........................ 2 0 9 Pets [...]

Radio, Navigation (Uconnect 威 gps) ........... 2 5 3 Radio Operation ...................... 254,271 Radio Remote Controls .................... 2 6 9 Radio, Satellite (Uconnect 威 studios) . . . 253,254,258,263 Radio (Sound Systems) .................... 2 5 3 Rear Air Conditioning .................... 2 8 4 Rear Camera ...........................[...]

Rocking V ehicle When Stuck ................ 3 9 6 Roof Rack (Luggage Rack) ................. 1 7 1 Rotation, T ires .......................... 3 4 2 Safety Checks Inside V ehicle ................. 8 5 Safety Checks Outside V ehicle ............... 8 5 Safety Defects, Reporting .................. 4 8 2 Safety , Exhaust Gas ..................... 39,[...]

Seatback Release ................. 100,108,1 15 T ilting .............................. 1 0 2 Security Alarm (Theft Alarm) ............. 17,183 Selection of Coolant (Antifreeze) .......... 424,456 Selection of Oil ......................... 4 1 0 Sentry Key (Immobilizer) ................... 1 5 Sentry Key Programming ................... 1 7 Sentry K[...]

Engine Fails to Start .................... 2 9 6 Remote .............................. 2 5 Starting and Operating .................... 2 9 5 Starting Procedur es ...................... 2 9 5 Steering Column Lock ......................... 1 3 1 Power ........................... 310,31 1 T ilt Column .......................... 1 3 1 Wheel, T ilt ....[...]

T ire Markings .......................... 3 2 4 T ire Safety Information .................... 3 2 4 T i r e s ............................ 85,334,485 Aging (Life of T ires) .................... 3 4 0 Air Pressur e .......................... 3 3 4 Chains .............................. 3 4 2 Changing ............................ 3 8 1 Compact Spare .[...]

T railer T owing .......................... 3 6 1 Cooling System T ips .................... 3 7 7 Hitches ............................. 3 6 6 Minimum Requirements ................. 3 7 0 T i p s ................................ 3 7 5 T railer and T ongue W eight ............... 3 6 9 W iring .............................. 3 7 3 T railer T owing Gui[...]

Universal T ransmitter ..................... 1 3 8 Unleaded Gasoline ....................... 3 5 2 Untwisting Procedur e, Seat Belt .............. 4 7 Upholstery Care ........................ 4 3 7 USB Port .............................. 2 5 3 V anity Mirrors ........................... 9 5 V ariance, Compass .................... 198,208 V ehicle C[...]

W indows, Express Down ................... 2 3 W indshield Defroster ...................... 8 5 W indshield W ashers ................... 126,129 Fluid ............................... 4 2 0 W indshield W iper Blades .................. 4 1 8 W indshield W ipers ....................... 1 2 6 W iper Blade Replacement .................. 4 1 8 W iper , D[...]

Chrysler Group LL C 10JC49-126-AB 2nd Edition Printed in U.S.A.[...]