Draytek 200 manual

[...]

VigorFly 200 Series User’s Guide ii VigorFly 200 Wi-Fi Router User’s Guide Version: 1.0 Date: 01/02/2010[...]

VigorFly 200 Series User’s Guide iii Copyright Information Copyright Declarations Copyright 2010 All rights reserved. This pub lication contains information th at is protected by copyright. No part may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language withou t written permission from the copyri[...]

VigorFly 200 Series User’s Guide iv European Community Declarations Manufacturer: DrayTek Corp. Address: No. 26, Fu Shing Road, HuKou County, H sinChu Industrial Park, Hsin-Chu, Taiwan 303 Product: VigorFly 200 Series Router DrayTek Corp. declares that VigorFly 200 is in compliance with the following essential requirements and other relevant p ro[...]

VigorFly 200 Series User’s Guide v T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s 1 Pref ace ............................................................................................................... 1 1.1 Web Conf iguration Bu ttons Explanation ................................................................................. 1 [...]

VigorFly 200 Series User’s Guide vi 3.6 System Ma intenance......................................................................................................... .... 61 3.6.1 System Status ............................................................................................................ ..... 61 3.6.2 User Password .................[...]

VigorFly 200 Series User’s Guide vii 4.7.5 Syslog/ Mail Al ert ........................................................................................................ ... 119 4.7.6 Time and Date ............................................................................................................ .. 120 4.7.7 M anagement ..................[...]

[...]

VigorFly 200 Series User’s Guide 1 1 P P r r e e f f a a c c e e VigorFly 200 is a compact broadband router with 802.11n WLAN ne twork. Its Ethernet WAN port can connect to VDSL/VDSL2/GPON/G. SHDSL /ADSL2+/ADSL/cable modem while you have fixed line. The NAT throughput can easily manage time-critical multimedia streaming. It's easy for family[...]

VigorFly 200 Series User’s Guide 2 1 1 . . 2 2 L L E E D D I I n n d d i i c c a a t t o o r r s s a a n n d d C C o o n n n n e e c c t t o o r r s s Before you use the Vigor router, please get acquainted with the LED indicators and connectors first. LED Status Explanation Off The system is not ready or is failed. ACT Blinking The system is read[...]

VigorFly 200 Series User’s Guide 3 1 1 . . 3 3 H H a a r r d d w w a a r r e e I I n n s s t t a a l l l l a a t t i i o o n n Before starting to configure the router, you have to connect your devices correctly. 1. Connect this device to a modem with an Ethernet cable. 2. Connect the LAN port to your computer with a RJ-45 cable. 3. Connect one en[...]

VigorFly 200 Series User’s Guide 4 1 1 . . 4 4 P P r r i i n n t t e e r r I I n n s s t t a a l l l l a a t t i i o o n n You can install a printer onto the router for shar ing printing. All the PCs connected this router can print documents via the router. The exam ple provided here is made based on Windows XP/2000. For Windows 98/SE/Vista, plea[...]

VigorFly 200 Series User’s Guide 5 4. Click Local printer attached to this computer and click Next. 5. In this dialog, choose Create a new port Type of port and use the drop down list to select Standard TCP/IP Port . Click Next .[...]

VigorFly 200 Series User’s Guide 6 6. In the following dialog, type 192.168.1.1 (router’ s LAN IP) in the field of Printer Name or IP Address and type IP_192.168.1.1 as the port name. Then, click Next . 7. Click Standard and choose Generic Network Card. 8. Then, in the following dialog, click Finish .[...]

VigorFly 200 Series User’s Guide 7 9. Now, your system will ask you t o choose right na m e of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC. When y ou finish the selection, click Next . 10. For the final stage, you need to g o back to Control Panel-> Printers and edit the property of the[...]

VigorFly 200 Series User’s Guide 8 The printer can be used for printing now. Most of the printers with different manufacturers are compatible with vigor router. Note 1: Some printers with the fax/scanning or other additional fun ctions are not supported. If you do not know whether your pr inter is supported or not, please vi sit www.draytek.com t[...]

VigorFly 200 Series User’s Guide 9 2 C C o o n n f f i i g g u u r r i i n n g g B B a a s s i i c c S S e e t t t t i i n n g g s s For using the router properly, it is necessar y for you to change the password of web configuration for security and adjust primary basic settings. 2 2 . . 1 1 T T w w o o - - L L e e v v e e l l M M a a n n a a g g[...]

VigorFly 200 Series User’s Guide 10 2 2 . . 3 3 C C h h a a n n g g i i n n g g P P a a s s s s w w o o r r d d Before configuring the web pages, please change the password for the original security of the router. Such action can be done in Admin Mode onl y. 1. Open a web browser on your PC and type http://192. 168.1.1. A pop-up window will open [...]

VigorFly 200 Series User’s Guide 11 3. To change the password, please access into Admin Mode . Then, go to System Maintenance page and choose Administration Password. 4. Type new user name in the field of Account and new password in the field of Password . Then click OK to continue. 5. Now, the password has been changed. Next time, use the new us[...]

VigorFly 200 Series User’s Guide 12 2 2 . . 4 4 Q Q u u i i c c k k S S t t a a r r t t W W i i z z a a r r d d Notice: Quick Start Wizard for user mode operation is the same as for admin mode operation. If your router can be under an environment with high speed NAT, the configuration provide here can help you to deploy and use the router quickl [...]

VigorFly 200 Series User’s Guide 13 2 2 . . 4 4 . . 2 2 S S e e t t t t i i n n g g u u p p t t h h e e T T i i m m e e a a n n d d D D a a t t e e On the next page as shown below, please select the Time Zone for the router installed and specify the NTP server(s). Then click Next for next step. 2 2 . . 4 4 . . 3 3 S S e e t t t t i i n n g g u u [...]

VigorFly 200 Series User’s Guide 14 S S t t a a t t i i c c I I P P You will receive a fixed public IP address or a public subnet, namely m ultiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a Cable service provider will offer a fixed public IP, while a DSL service provider will offer a public subnet. If you [...]

VigorFly 200 Series User’s Guide 15 D D H H C C P P It is not necessary for you to type any IP addr ess manually. Simply choose this type and the system will obtain the IP address automatically from DHCP server. DHCP Mode Router Name – Default setting is VigorFly200. Enable The router will detect the MAC address automatically. Or, check the box[...]

VigorFly 200 Series User’s Guide 16 If your ISP provides you the PPPoE connection, please select PPPoE for this router. The following page will be shown: User Name Assign a specific valid user name provided by the ISP. Password Assign a valid password provided by the ISP. Confirmed Password Type the password again for confirmation. Redial Policy [...]

VigorFly 200 Series User’s Guide 17 P P P P T T P P / / L L 2 2 T T P P If you click PPTP/L2TP as the connection type, please manually enter the Username/Password provided by your ISP and all the required inform ation. L2TP/PPTP Server IP Address Specify the IP address of the PPTP/L2TP server. User Name Assign a specific valid user name provided [...]

VigorFly 200 Series User’s Guide 18 address automatically. And the result will be displayed in the field of MAC Address. Besides, if you want to change the MAC address for WAN interface, simply click Enable and ty pe the MAC address in this field manually. After finishing the settings here, please click Next. 3 3 G G U U S S B B M M o o d d e e m[...]

VigorFly 200 Series User’s Guide 19 field of MAC Address. Besides, if you want to change the MAC address for WAN interface, simply click Enable and ty pe the MAC address in this field manually. After finishing the settings here, please click Next. 2 2 . . 4 4 . . 4 4 S S e e t t t t i i n n g g u u p p t t h h e e W W i i r r e e l l e e s s s s [...]

VigorFly 200 Series User’s Guide 20 ask you to offer additional configuration. W W E E P P If you choose WEP as the security configuration, you have to specify encryption key (Key 1 ~ Key 4) and authentication mode (open or shar ed). All wireless devices must support the same WEP encryption bit size and have the same key . Key 1 ~ Key 4 Four keys[...]

VigorFly 200 Series User’s Guide 21 W W P P A A / / P P S S K K o o r r W W P P A A 2 2 / / P P S S K K o o r r M M i i x x e e d d ( ( W W P P A A + + W W P P A A 2 2 ) ) / / P P S S K K Accepts only WPA clients and the encryption key should be entered in PSK. The WPA encrypts each frame transmitted from the radio us ing the key, which either PS[...]

VigorFly 200 Series User’s Guide 22 W W E E P P / / 8 8 0 0 2 2 . . 1 1 x x Remote Authentication Dial-In User Servi ce (RADIUS) is a security authentication client/server protocol that supports authenti cation, authorization and accounting, which is widely used by Internet service providers. It is the most common method of authenticating and aut[...]

VigorFly 200 Series User’s Guide 23 W W P P A A / / 8 8 0 0 2 2 . . 1 1 x x The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in this fiel d below or automatically negotiated via 802.1x authentication. WPA Algorithms Select TKIP, AES or TKIP/AES as the algorithm for WPA. Key R[...]

VigorFly 200 Series User’s Guide 24 W W P P A A 2 2 / / 8 8 0 0 2 2 . . 1 1 x x The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in this fiel d below or automatically negotiated via 802.1x authentication. WPA Algorithms Select TKIP, AES or TKIP/AES as the algorithm for WPA. K[...]

VigorFly 200 Series User’s Guide 25 authenticate the messages sent between them. Both sides must be configured to use the same shared secret. Session Timeout Set the maximum time of service provided before re-authentication. Set to zero to perform another authentication immediately after the first authentication has successfully completed. (The u[...]

VigorFly 200 Series User’s Guide 26 Session Timeout Set the maximum time of service provided before re-authentication. Set to zero to perform another authentication immediately after the first authentication has successfully completed. (The unit is second.) Idle Timeout Set the maximum time that a wireless device may remain idle. (The unit is sec[...]

VigorFly 200 Series User’s Guide 27 IP Address Displays the IP address of the LAN interface. TX Packets Displays the total transmitted packets at the LAN interface. RX Packets Displays the total number of received packets at the LAN interface. WAN Status IP Displays the IP address of the WAN interface. GW IP Displays the IP address of the default[...]

VigorFly 200 Series User’s Guide 28 This page is left blank.[...]

VigorFly 200 Series User’s Guide 29 3 U U s s e e r r M M o o d d e e O O p p e e r r a a t t i i o o n n This chapter will guide users to execute simp le configuration through user mode operation. 1. Open a web browser on your PC and type http://192. 168.1.1. The window will ask for typing username and password. 2. Do not type any word (both use[...]

VigorFly 200 Series User’s Guide 30 W W h h a a t t a a r r e e P P u u b b l l i i c c I I P P A A d d d d r r e e s s s s a a n n d d P P r r i i v v a a t t e e I I P P A A d d d d r r e e s s s s As the router plays a role to manage and further protect its LAN, it interconnects groups of host PCs. Each of them has a private IP address assigne[...]

VigorFly 200 Series User’s Guide 31 3 3 . . 1 1 . . 1 1 I I n n t t e e r r n n e e t t A A c c c c e e s s s s This page allows you to set WAN configuration with different modes. Use the Connection Type drop down list to choose one of the WAN modes. The corresponding page will be displayed. S S t t a a t t i i c c I I P P For static IP mode, you[...]

VigorFly 200 Series User’s Guide 32 Default Gateway Type the gateway IP address. Primary DNS Server Y ou must specify a DNS server IP address here because your ISP should provide you with usually more than one DNS Server . If your ISP does not provide it, the router will automatically apply default DNS Server IP address: 198.95.1.1 to this field.[...]

VigorFly 200 Series User’s Guide 33 D D H H C C P P DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet. If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for your router automatically. It is not necessary for you to assign any setting, Router Name Type in a name for the [...]

VigorFly 200 Series User’s Guide 34 Username Type in the username provided by ISP i n this field. Password Type in the password provided by ISP in this field. Redial Policy If you want to connect to Internet all the time, you can choose Always On . Otherwise, choose Connect on Demand . Idle Time - Set the timeout for breaking down the Internet af[...]

VigorFly 200 Series User’s Guide 35 P P P P T T P P / / L L 2 2 T T P P To use PPTP/L2TP as the accessing protocol of the internet, please choose PPTP/L2TP from Connection Type drop down menu. The following web page will be shown. Server IP Type in the IP address of the PPTP/L2TP server. User Name Type in the username provided by ISP in this fiel[...]

VigorFly 200 Series User’s Guide 36 MAC Address. After finishing all the settings here, please click OK to activate them. 3 3 G G U U S S B B M M o o d d e e m m If your router connects to a 3G modem and you wa nt t o access Internet via 3G modem, choose 3G as connection type and type the re quired inform ation in this web page. SIM PIN code Type[...]

VigorFly 200 Series User’s Guide 37 . After finishing all the settings here, please click OK to activate them. 3 3 . . 1 1 . . 2 2 3 3 G G B B a a c c k k u u p p This page is used to setup 3G backup functi on. If you enable 3G backup, ma ke sure your WAN connection type is not in 3G mode. When the WAN connection is broken, router will try to kee[...]

VigorFly 200 Series User’s Guide 38 3 3 . . 2 2 L L A A N N Local Area Network (LAN) is a group of subnets regulated and rul ed by router . The design of network structure is related to what type of public IP addresses co ming from your ISP . B B a a s s i i c c s s o o f f L L A A N N The most generic function of V igor router is NA T . It creat[...]

VigorFly 200 Series User’s Guide 39 W W h h a a t t i i s s R R o o u u t t i i n n g g I I n n f f o o r r m m a a t t i i o o n n P P r r o o t t o o c c o o l l ( ( R R I I P P ) ) V igor router will exchange routing informati on with neighboring routers using the RIP to accomplish IP routing. This allows users to cha nge the information of th[...]

VigorFly 200 Series User’s Guide 40 network (Default: 192.168.1.1). Subnet Mask T ype in an address code that determines the size of the network. (Default: 255.255.255.0) For IP Routing Usage Click Enable to invoke this function. The default setting is Disable . 2 nd IP Address T ype in secondary IP address for connecting to a subne t. (Default: [...]

VigorFly 200 Series User’s Guide 41 automatically apply default secondary DNS Server IP address: 194.98.0.1 to this field. If both the Primary IP and Secondary IP Address fields are left empty , the router will assign its own IP address to local users as a DNS proxy server and maintain a DNS cache. If the IP address of a domain name is already in[...]

VigorFly 200 Series User’s Guide 42 V irtual Server Settings Choose Enable to invoke this setting. Protocol Specify the transport layer protocol. It could be TCP , UDP and TCP+UDP . Public Port Range Specify the starting port number and ending port number of the service offered by the local host. Local IP Address Enter the private IP address of t[...]

VigorFly 200 Series User’s Guide 43 Note: The security properties of NA T are somewhat bypassed if you set up DMZ host. W e suggest you to add additional filter rules or a secondary firewall. Click DMZ Host to open the following page: DMZ Settings Check this box to enable the DMZ Host function. DMZ IP Address Enter the private IP address of the D[...]

VigorFly 200 Series User’s Guide 44 3 3 . . 4 4 A A p p p p l l i i c c a a t t i i o o n n s s Below shows the menu items for Applications. 3 3 . . 4 4 . . 1 1 D D y y n n a a m m i i c c D D N N S S The ISP often provides you with a dynamic IP address when you c onnect to the Internet via your ISP. It means that the public IP address assigned t[...]

VigorFly 200 Series User’s Guide 45 holes everywhere. Wireless LAN enables high mobility so WLAN users can simultaneously access all LAN facilities just like on a wired LAN as well as Internet access The Vigor wireless routers are equipped with a wireless LAN interface compliant with the standard IEEE 802.11n draft 2 prot ocol . To boost its perf[...]

VigorFly 200 Series User’s Guide 46 In WPA-Personal, a pre-defined key is used for encryption during data transmission. WPA applies Temporal Key Integrity Protocol (TKIP) for data encryption while WPA2 applies AES. The WPA-Enterprise combines not only encry ption but also authentication. Since WEP has been proved vulnerable, you may consider usin[...]

VigorFly 200 Series User’s Guide 47 Hide SSID Check it to prevent from wireless sniffing and make it harder for unauthorized clients or STAs to join your wireless LAN. Depending on the wireless utility, the user may only see the information except SSID or just cannot see any thing about Vigor wireless router while site surveying. The system allow[...]

VigorFly 200 Series User’s Guide 48 Universal Repeater If such mode is enabled, the access point can act as a wireless repeater; it can be Station and AP at the same time. It can use Station function to connect to a Root AP and use AP function to service all wireless stations within its coverage. Check this box to enable the function. Besides, it[...]

VigorFly 200 Series User’s Guide 49 Mode There are several modes provided for you to choose. z Disable The encryption mechan ism is turned off. z WEP Accepts only WEP clients and the encrypti on key should be entered in WEP Key.[...]

VigorFly 200 Series User’s Guide 50 WEP Key1-Key4 Four keys can be entered here, but only one key can be selected at a time. The format of WEP Key is restricted to 5 ASCII characters or 10 hexadecimal values in 64-bit encryption level, or restricted to 13 ASCII characters or 26 hexadecimal values in 128-bit encryption level. The allowed content i[...]

VigorFly 200 Series User’s Guide 51 z WPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK Accepts only WPA clients and the encryption key should be entered in PSK. The WPA encrypts each frame transmitted from the ra dio using the key, which either PSK (Pre-Shared Key) entered manually in this field below or automatically negotiated via 802.1x authenticat[...]

VigorFly 200 Series User’s Guide 52 802.1x WEP Disable - Disable the WEP Encryption. Data sent to the AP will not be encrypted. Enable - Enable the WEP Encryption. Click the link of RADIUS Server to access into the following page for more settings. IP Address Enter the IP address of RADIUS server. Port The UDP port number that the RADIUS server i[...]

VigorFly 200 Series User’s Guide 53 idle. (The unit is second.) z WPA/802.1x The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in th is field below or automatically negotiated via 802.1x authentication. WP A Algorithms Select TKIP , AES or TKIP/AES as the algorithm for WP A. K[...]

VigorFly 200 Series User’s Guide 54 IP Address Enter the IP address of RADIUS server . Port The UDP port number that the RADIUS server is using. The default value is 1812, based on RFC 2138. Shared Secr et The RADIUS server and client share a secret that is used to authenticate the messages sent between them. Both sides must be configured to use [...]

VigorFly 200 Series User’s Guide 55 z WPA2/802.1x The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in th is field below or automatically negotiated via 802.1x authentication. WP A Algorithms Select TKIP , AES or TKIP/AES as the algorithm for WP A. Key Renewal Interval WPA use[...]

VigorFly 200 Series User’s Guide 56 IP Address Enter the IP address of RADIUS server . Port The UDP port number that the RADIUS server is using. The default value is 1812, based on RFC 2138. Shared Secr et The RADIUS server and client share a secret that is used to authenticate the messages sent between them. Both sides must be configured to use [...]

VigorFly 200 Series User’s Guide 57 WP A Algorithms Select TKIP , AES or TKIP/AES as the algorithm for WP A. Key Renewal Interval WPA uses shared key for auth entication to the network. However, normal network operations use a different encryption key that is randomly generated. This random ly generated key that is peri odically replaced. Enter t[...]

VigorFly 200 Series User’s Guide 58 Session Timeout Set the maximum time of service provided before re-authentication. Set to zero to perform another authentication immediately after the first authentication has successfully completed. (The unit is second.) Idle Timeout Set the maximum time that a wireless device may remain idle. (The unit is sec[...]

VigorFly 200 Series User’s Guide 59 z Open / Shared Mode Encryption T ype Choose None to disable the WEP Encryption. Data sent to the AP will not be encrypted. To enable WEP encryption for data transmission, please choose WEP . WEP Keys Four keys can be entered here, but only one key can be selected at a time. The format of WEP Key is restricted [...]

VigorFly 200 Series User’s Guide 60 3 3 . . 5 5 . . 5 5 S S t t a a t t i i o o n n L L i i s s t t Station List provides the knowledge of connecting wire less clients now along with its status code. MAC Address Display the MAC Address for the connecting client. SSID Display the SSID of the connecting client. Auth Display the authentication mode [...]

VigorFly 200 Series User’s Guide 61 3 3 . . 6 6 S S y y s s t t e e m m M M a a i i n n t t e e n n a a n n c c e e For the system setup, there are several items that you have to know the way of configuration: Status, Time and Date, and Firmware Upgrade. Below shows the menu items for System Maintenance. 3 3 . . 6 6 . . 1 1 S S y y s s t t e e m [...]

VigorFly 200 Series User’s Guide 62 interface. Device Type Display the device type used for wireless LAN. SSID Display the SSID of this router. Channel Display the channel that wireless LAN used. Connected Type Display the network connection type for this router. Link Status Display if current network is connected or not. Default Gateway Display [...]

VigorFly 200 Series User’s Guide 63 3 3 . . 6 6 . . 4 4 F F i i r r m m w w a a r r e e U U p p g g r r a a d d e e Before upgrading your router firmware, you need to install the Router Tools. The Firmware Upgrade Utility is included in the tools. The following web page will guide you to upgrade firmware by using an exam ple. Note that this examp[...]

VigorFly 200 Series User’s Guide 64 3 3 . . 7 7 D D i i a a g g n n o o s s t t i i c c s s Diagnostic Tools provide a useful way to view or diagnose the status of your Vigor router. Below shows the menu items for Diagnostics. 3 3 . . 7 7 . . 1 1 S S y y s s t t e e m m L L o o g g Click Diagnostics and click System Log to open the web page. Clea[...]

VigorFly 200 Series User’s Guide 65 Refresh Click it to reload the page. 3 3 . . 8 8 S S u u p p p p o o r r t t A A r r e e a a When you click the menu item under Support Area , you will be guided to visit www.draytek.com and open the corresponding pages directly. Click Support Area>>Application Note , the following web page will be displa[...]

VigorFly 200 Series User’s Guide 66 Click Support Area>>Product Registration , the following web page will be displayed.[...]

VigorFly 200 Series User’s Guide 67 4 A A d d m m i i n n M M o o d d e e O O p p e e r r a a t t i i o o n n This chapter will guide users to execute adva nced (full) configuration thr ough admin mode operation. 1. Open a web browser on your PC and type http://192. 168.1.1. The window will ask for typing username and password. 2. Please type “[...]

VigorFly 200 Series User’s Guide 68 W W h h a a t t a a r r e e P P u u b b l l i i c c I I P P A A d d d d r r e e s s s s a a n n d d P P r r i i v v a a t t e e I I P P A A d d d d r r e e s s s s As the router plays a role to manage and further protect its LAN, it interconnects groups of host PCs. Each of them has a private IP address assigne[...]

VigorFly 200 Series User’s Guide 69 4 4 . . 1 1 . . 1 1 I I n n t t e e r r n n e e t t A A c c c c e e s s s s This page allows you to set WAN configura tion with different modes. Use the Connection Type drop down list to choose one of the WAN modes. The corresponding page will be displayed. S S t t a a t t i i c c I I P P For static IP mode, yo[...]

VigorFly 200 Series User’s Guide 70 Primary DNS Server Y ou must specify a DNS server IP address here because your ISP should provide you with usually more than one DNS Server . If your ISP does not provide it, the router will automatically apply default DNS Server IP address: 198.95.1.1 to this field. Secondary DNS Server Y ou can specify second[...]

VigorFly 200 Series User’s Guide 71 P P P P P P o o E E To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the Internet Access menu. The following web page will be shown. Username Type in the username provided by ISP i n this field. Password Type in the password provided by ISP in this field. Confirm Password Re-e[...]

VigorFly 200 Series User’s Guide 72 Server IP Type in the IP address of the PPTP/L2TP server. User Name Type in the username provided by ISP in this field. Password Type in the password provided by ISP in this field. Address Mode You can choose Static IP or DHCP as WAN IP network setting. IP Address Type the IP address if you choose Static IP as [...]

VigorFly 200 Series User’s Guide 73 After finishing all the settings here, please click OK to activate them. 3 3 G G U U S S B B M M o o d d e e m m If your router connects to a 3G modem and you wa nt t o access Internet via 3G modem, choose 3G as connection type and type the re quired inform ation in this web page. SIM PIN code Type PIN code of [...]

VigorFly 200 Series User’s Guide 74 4 4 . . 1 1 . . 2 2 3 3 G G B B a a c c k k u u p p This page is used to setup 3G backup functi on. If you enable 3G backup, ma ke sure your WAN connection type is not in 3G mode. When the WAN connection is broken, router will try to keep the connection with 3G m ode. Af ter WAN connection is recovered, router [...]

VigorFly 200 Series User’s Guide 75 4 4 . . 2 2 L L A A N N Local Area Network (LAN) is a group of subnets regulated and rul ed by router . The design of network structure is related to what type of public IP addresses co ming from your ISP . B B a a s s i i c c s s o o f f L L A A N N The most generic function of V igor router is NA T . It creat[...]

VigorFly 200 Series User’s Guide 76 W W h h a a t t i i s s R R o o u u t t i i n n g g I I n n f f o o r r m m a a t t i i o o n n P P r r o o t t o o c c o o l l ( ( R R I I P P ) ) V igor router will exchange routing informati on with neighboring routers using the RIP to accomplish IP routing. This allows users to cha nge the information of th[...]

VigorFly 200 Series User’s Guide 77 IP Address T ype in private IP address for connecting to a local private network (Default: 192.168.1.1). Subnet Mask T ype in an address code that determines the size of the network. (Default: 255.255.255.0) For IP Routing Usage Click Enable to invoke this function. The default setting is Disable . 2 nd IP Addr[...]

VigorFly 200 Series User’s Guide 78 Server . If your ISP does not provide it, the router will automatically apply default secondary DNS Server IP address: 194.98.0.1 to this field. If both the Primary IP and Secondary IP Address fields are left empty , the router will assign its own IP address to local users as a DNS proxy server and maintain a D[...]

VigorFly 200 Series User’s Guide 79 4 4 . . 3 3 N N A A T T Usually, the router serves as an NAT (Network Address Translation) router. NAT is a mechanism that one or more private IP a ddresses can be mapped into a single public one. Public IP address is usually assigned by your ISP, for which you may get charged. Private IP addresses are recogniz[...]

VigorFly 200 Series User’s Guide 80 4 4 . . 3 3 . . 1 1 O O p p e e n n P P o o r r t t s s Open Ports allows you to open a range of ports for the traffic of special applications. Common application of Open Ports includes P2 P application (e.g., BT, KaZaA, Gnutella, WinMX, eMule and others), Internet Camera etc. Ensure that you keep the appl icat[...]

VigorFly 200 Series User’s Guide 81 4 4 . . 3 3 . . 2 2 D D M M Z Z H H o o s s t t As mentioned above, Port Redirection can redirect incoming TCP/UDP or othe r traffic on particular ports to the specific private IP address/port of host in the LAN. However, other IP protocols, for example Protocols 50 (ESP) and 51 (A H), do not travel on a fixed [...]

VigorFly 200 Series User’s Guide 82 4 4 . . 3 3 . . 3 3 S S e e s s s s i i o o n n L L i i m m i i t t A PC with private IP address can access to the Internet via NAT router. The router will generate the records of NAT sessions for such c onnection. The P2P (Peer to Peer) applications (e.g., BitTorrent) always need many sessions for procession a[...]

VigorFly 200 Series User’s Guide 83 4 4 . . 4 4 . . 1 1 D D o o S S D D e e f f e e n n s s e e As a sub-functionality of IP Filter/Firewall, ther e are 5 types of detect/ defense function in the DoS Defense setup. The DoS Defense functionality is disabled for default. Click Firewall and click DoS Defense to open the setup page. Enable Dos Defens[...]

VigorFly 200 Series User’s Guide 84 will block any packets realizing this attacking activity. OK Click this button to save such profile. Clear All Click this button to clear all of the settings in this page. Cancel Click this button to cancel current operation 4 4 . . 4 4 . . 2 2 M M A A C C / / I I P P / / P P o o r r t t F F i i l l t t e e r r[...]

VigorFly 200 Series User’s Guide 85 Source Port Range Determine the port range for the source. Action Accept – the packets that match with such rule will be accepted. Drop – the packets that match with such rule will be blocked. Comment Enter filter set comments/d escription. Maximum length is 23–character long. OK Click this button to save[...]

VigorFly 200 Series User’s Guide 86 Once a user type in or click on an URL with objectionable keywords, URL keyword blocki ng facility will decline the HTTP request to that web page thus can limit user’s access to the website. You may imagine URL Content Filter as a well-trained convenience-store clerk who won’t sell adult magazines to teenag[...]

VigorFly 200 Series User’s Guide 87 To delete the URL setting, simply click that one and click Delete to remove it. 4 4 . . 5 5 A A p p p p l l i i c c a a t t i i o o n n s s Below shows the menu items for Applications. 4 4 . . 5 5 . . 1 1 D D y y n n a a m m i i c c D D N N S S The ISP often provides you with a dynamic IP address when you c onn[...]

VigorFly 200 Series User’s Guide 88 www.dtdns.com, www.changeip.com, www.dynamic- nameserver.com. You should visit their websites to register your own domain nam e for the router. Service Provider Select the service provider for the DDNS account. If you choose None , such function will be disabled. Domain name Type in one domain name that y ou ap[...]

VigorFly 200 Series User’s Guide 89 4 4 . . 5 5 . . 4 4 I I G G M M P P IGMP is the abbreviation of Internet Group Management Protocol . It is a communication protocol which is mainly used for managing the membership of Internet Protocol m u lticast groups. 4 4 . . 5 5 . . 5 5 U U P P n n P P C C o o n n f f i i g g u u r r a a t t i i o o n n Th[...]

VigorFly 200 Series User’s Guide 90 The UPnP facility on the router enables UPnP aware applications such as MSN Messenger to discover what are behind a NA T router . The application will also learn the external IP address and configure port mappings on the rout er . Subse quently , such a facility forwards packets from the external ports of the r[...]

VigorFly 200 Series User’s Guide 91 The UPnP function dynamically adds port ma ppings on behalf of some UPnP-aware applications. When the applications terminate abnormally, these mappings may not be removed. 4 4 . . 6 6 W W i i r r e e l l e e s s s s L L A A N N 4 4 . . 6 6 . . 1 1 B B a a s s i i c c C C o o n n c c e e p p t t s s Over recent [...]

VigorFly 200 Series User’s Guide 92 Complete Security Standard Selection: To ensure the security and privacy of your wireless communication, we provide several prevailing standards on market. WEP (Wired Equivalent Privacy) is a legacy method to encrypt each frame transmitted via radio using either a 64-bit or 128-bit ke y. Usually access point wi[...]

VigorFly 200 Series User’s Guide 93 Enable Wireless LAN Check the box to enable wireless function. Mode At present, the router can connect to Mixed (11b+11g), 11g Only, 11b Only, Mixed (11g+11n), 11n Only and Mixed (11b+11g+11n) stations simultaneously. Simply choose Mixed (11b+11g+11n) mode. Hide SSID Check it to prevent from wireless sniffing a[...]

VigorFly 200 Series User’s Guide 94 choosing the frequency, please select AutoSelect to let system determine for you. OK Click it to save and apply such setting. Packet-OVERDRIVE This feature c an enhance the performance in data transmission about 40%* m ore (by checking Tx Burs t). It is active only when both sides of Access Point and Station (i[...]

VigorFly 200 Series User’s Guide 95 4 4 . . 6 6 . . 3 3 S S e e c c u u r r i i t t y y This page allows you to set security with di fferent modes for SSID 1, 2 and 3 respectively. After configuring the correct settings, please click OK to save and invoke it. By clicking the Security Settings , a new web page will appear so that you could configu[...]

VigorFly 200 Series User’s Guide 96 WEP Key1-Key4 Four keys can be entered here, but only one key can be selected at a time. The format of WEP Key is restricted to 5 ASCII characters or 10 hexadecimal values in 64-bit encryption level, or restricted to 13 ASCII characters or 26 hexadecimal values in 128-bit encryption level. The allowed content i[...]

VigorFly 200 Series User’s Guide 97 z WPA/PSK or WPA2/PSK or Mixed (WPA+WPA2)/PSK Accepts only WPA clients and the encryption key should be entered in PSK. The WPA encrypts each frame transmitted from the ra dio using the key, which either PSK (Pre-Shared Key) entered manually in this field below or automatically negotiated via 802.1x authenticat[...]

VigorFly 200 Series User’s Guide 98 802.1x WEP Disable - Disable the WEP Encryption. Data sent to the AP will not be encrypted. Enable - Enable the WEP Encryption. Click the link of RADIUS Server to access into the following page for more settings. IP Address Enter the IP address of RADIUS server. Port The UDP port number that the RADIUS server i[...]

VigorFly 200 Series User’s Guide 99 idle. (The unit is second.) z WPA/802.1x The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in th is field below or automatically negotiated via 802.1x authentication. WP A Algorithms Select TKIP , AES or TKIP/AES as the algorithm for WP A. K[...]

VigorFly 200 Series User’s Guide 100 IP Address Enter the IP address of RADIUS server . Port The UDP port number that the RADIUS server is using. The default value is 1812, based on RFC 2138. Shared Secr et The RADIUS server and client share a secret that is used to authenticate the messages sent between them. Both sides must be configured to use[...]

VigorFly 200 Series User’s Guide 101 z WPA2/802.1x The WPA encrypts each frame transmitted from the radio using the key, which either PSK (Pre-Shared Key) entered manually in th is field below or automatically negotiated via 802.1x authentication. WP A Algorithms Select TKIP , AES or TKIP/AES as the algorithm for WP A. Key Renewal Interval WPA us[...]

VigorFly 200 Series User’s Guide 102 IP Address Enter the IP address of RADIUS server . Port The UDP port number that the RADIUS server is using. The default value is 1812, based on RFC 2138. Shared Secr et The RADIUS server and client share a secret that is used to authenticate the messages sent between them. Both sides must be configured to use[...]

VigorFly 200 Series User’s Guide 103 WP A Algorithms Select TKIP , AES or TKIP/AES as the algorithm for WP A. Key Renewal Interval WPA uses shared key for auth entication to the network. However, normal network operations use a different encryption key that is randomly generated. This random ly generated key that is peri odically replaced. Enter [...]

VigorFly 200 Series User’s Guide 104 Session Timeout Set the maximum time of service provided before re-authentication. Set to zero to perform another authentication immediately after the first authentication has successfully completed. (The unit is second.) Idle Timeout Set the maximum time that a wireless device may remain idle. (The unit is se[...]

VigorFly 200 Series User’s Guide 105 OK Click it to save the access control list. Cancel Clean all entries in the MAC address list. 4 4 . . 6 6 . . 5 5 W W P P S S WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point (vigor router) with the encryption of WPA and WPA2. It[...]

VigorFly 200 Series User’s Guide 106 If you want to use PIN code, you have to know th e PIN code specified in wireless client. Then provide the PIN code of the wireless client you wish to connect to the vigor r outer. Enable WPS Check this box to enable WPS setting. WPS Current Status Display related system information for WPS. If the wireless se[...]

VigorFly 200 Series User’s Guide 107 to normal condition after two m inutes. (You need to setup WPS within two minutes) Configure via Client PinCode Type the PIN code specified in wireless client you wish to connect, and click Start PIN button. The WLAN LED on the router will blink fast when WPS is in progress. It will return to normal condition [...]

VigorFly 200 Series User’s Guide 108 The major difference between these two modes is that: while in Repeater mode, the packets received from one peer AP can be repeated to another peer AP through WDS links. Yet in Bridge mode, packets received from a WDS link will only be for warded to local wired or wireless hosts. In other words, only Repeater [...]

VigorFly 200 Series User’s Guide 109 Mode Choose the mode for WDS setting. Disable mode will not invoke any WDS setting. Bridge Mode is designed to fulfill the first type of application. Repeater Mode is for the second one. Security There are four ty pes for security, Disabled , WEP , TKIP and Key or Peer Mac Address field valid or not. Choose on[...]

VigorFly 200 Series User’s Guide 110 4 4 . . 6 6 . . 7 7 U U n n i i v v e e r r s s a a l l R R e e p p e e a a t t e e r r This menu is available only when it is enabled in Wireless LAN>>General Setup . It allows you to specify which AP that remote client can connect to. The access point can act as a wireless r epeater; it ca n be Station[...]

VigorFly 200 Series User’s Guide 111 z Open / Shared Mode Encryption T ype Choose None to disable the WEP Encryption. Data sent to the AP will not be encrypted. To enable WEP encryption for data transmission, please choose WEP . WEP Keys Four keys can be entered here, but only one key can be selected at a time. The format of WEP Key is restricted[...]

VigorFly 200 Series User’s Guide 112 4 4 . . 6 6 . . 8 8 A A P P D D i i s s c c o o v v e e r r y y Vigor router can scan all regulatory channels and find working APs in the neighborhood. Based on the scanning result, users will know which channel is clean for usage. Also, it can be used to facilitate finding an AP for a WDS li nk. Notice that d[...]

VigorFly 200 Series User’s Guide 113 4 4 . . 6 6 . . 9 9 W W M M M M C C o o n n f f i i g g u u r r a a t t i i o o n n WMM is an abbreviation of Wi-Fi Multimedia. It defines the priority levels for four access categories derived from 802.1d (prioritization tabs). T he categories are designed with specific types of traffic, voice, video, best ef[...]

VigorFly 200 Series User’s Guide 114 transmission, please set greater value for them to get highest transmission opportunity. Specify the value ranging from 0 to 65535. ACM It is an abbreviation of Admission Control Mandatory. It can restrict stations from using specific category class if it is checked. AckPolicy “Uncheck” (default value) the[...]

VigorFly 200 Series User’s Guide 115 4 4 . . 7 7 S S y y s s t t e e m m M M a a i i n n t t e e n n a a n n c c e e For the system setup, there are several items that you have to know the way of configuration: System Status, Administrator Password, Configuration Backup, Syslog/Mail Alert, Time and Date, Management, Reboot Syst em, and Firmware U[...]

VigorFly 200 Series User’s Guide 116 MAC Address Display the MAC address of the LAN or WAN or WLAN Interface. IP Address Display the MAC address of the LAN or WAN Interface. IP Mask Display the subnet mask address of the LAN or WAN interface. Device Type Display the device type used for wireless LAN. SSID Display the SSID of this router. Channel [...]

VigorFly 200 Series User’s Guide 117 When you click OK , the login window will appear. Please use the new password to access into the web configurator for user operation again. 4 4 . . 7 7 . . 4 4 C C o o n n f f i i g g u u r r a a t t i i o o n n B B a a c c k k u u p p B B a a c c k k u u p p t t h h e e C C o o n n f f i i g g u u r r a a t t[...]

VigorFly 200 Series User’s Guide 118 4. Click Save button, the configuration will download a utomatically to your computer as a file named config.cfg . The above example is using W indows platform for demonstrating examples. The Mac or Linux platform will appear dif ferent windows, but the backup function is still available. Note: Backup for Cert[...]

VigorFly 200 Series User’s Guide 119 4 4 . . 7 7 . . 5 5 S S y y s s l l o o g g / / M M a a i i l l A A l l e e r r t t SysLog function is provided for users to monitor router. There is no bother to directly get into the Web Configurator of the router or borrow debug equipm ents. Enable (for Syslog Access Setup) Check Enable to activate function[...]

VigorFly 200 Series User’s Guide 120 1. Just set your monitor PC’s IP address in the field of Server IP Address 2. Install the Router Tools in the Utility within provided CD. After installation, click on the Router Tools>>Syslog from program menu. 3. From the Syslog screen, select the router you want to monitor. Be reminded that in Networ[...]

VigorFly 200 Series User’s Guide 121 Click OK to save these settings. 4 4 . . 7 7 . . 7 7 M M a a n n a a g g e e m m e e n n t t This page allows you to manage the setti ngs for access control, access list, port setup, and SMP setup. For example, as to management access control, the port number is used to send/receive SIP message for building a [...]

VigorFly 200 Series User’s Guide 122 Note: When the system pops up Reboot System web page after you configure web settings, please click Yes to reboot your router for ensuring normal operation and preventing unexpected errors of the router in the future. 4 4 . . 7 7 . . 9 9 F F i i r r m m w w a a r r e e U U p p g g r r a a d d e e Before upgrad[...]

VigorFly 200 Series User’s Guide 123 4 4 . . 8 8 D D i i a a g g n n o o s s t t i i c c s s Diagnostic Tools provide a useful way to view or diagnose the status of your Vigor router. Below shows the menu items for Diagnostics. 4 4 . . 8 8 . . 1 1 S S y y s s t t e e m m L L o o g g Click Diagnostics and click System Log to open the web page. Cle[...]

VigorFly 200 Series User’s Guide 124 4 4 . . 8 8 . . 2 2 D D H H C C P P T T a a b b l l e e The facility provides information on IP address as signments. This information is helpful in diagnosing network problems, such as IP address conflicts, etc. Click Diagnostics and click DHCP Table to open the web page. Host name Display the name of the com[...]

VigorFly 200 Series User’s Guide 125 Click Support Area>>FAQ , the following web page will be displayed. Click Support Area>>Product Registration , the following web page will be displayed.[...]

VigorFly 200 Series User’s Guide 126 This page is left blank.[...]

VigorFly 200 Series User’s Guide 127 5 T T r r o o u u b b l l e e S S h h o o o o t t i i n n g g This section will guide you to solve abnormal s ituations if you cannot access into the Internet after installing the router and finishing the we b configuration. Please follow sections below to check your basic installation status stage by stage. z[...]

VigorFly 200 Series User’s Guide 128 5 5 . . 2 2 C C h h e e c c k k i i n n g g I I f f t t h h e e N N e e t t w w o o r r k k C C o o n n n n e e c c t t i i o o n n S S e e t t t t i i n n g g s s o o n n Y Y o o u u r r C C o o m m p p u u t t e e r r I I s s O O K K o o r r N N o o t t Sometimes the link failure occurs due to the wrong netw[...]

VigorFly 200 Series User’s Guide 129 4. Select Obtain an IP address automatically and Obtain DNS server address automatically . F F o o r r M M a a c c O O s s 1. Double click on the current used MacOs on the desktop. 2. Open the Application folder and get into Network . 3. On the Network screen, select Using DHCP from the drop down list of Confi[...]

VigorFly 200 Series User’s Guide 130 5 5 . . 3 3 P P i i n n g g i i n n g g t t h h e e R R o o u u t t e e r r f f r r o o m m Y Y o o u u r r C C o o m m p p u u t t e e r r The default gateway IP address of the router is 192.168.1.1. For some reason, you might need to use “ping” command to check the link status of the router. The most imp[...]

VigorFly 200 Series User’s Guide 131 5 5 . . 4 4 C C h h e e c c k k i i n n g g I I f f t t h h e e I I S S P P S S e e t t t t i i n n g g s s a a r r e e O O K K o o r r N N o o t t Open WAN>>Internet Access page and then check whether the ISP settings are set correctly . Use the Connection Type drop down list to choose Static IP/DHCP/PP[...]

VigorFly 200 Series User’s Guide 132 F F o o r r S S t t a a t t i i c c U U s s e e r r s s 1. Choose Static IP as the connection type. 2. Check if IP Address, IP Mask and IP Router are set correctly (must identify with the values from your ISP). F F o o r r P P P P P P o o E E U U s s e e r r s s 1. Choose PPPoE as the connection type. 2. Check[...]

VigorFly 200 Series User’s Guide 133 F F o o r r P P P P T T P P / / L L 2 2 T T P P U U s s e e r r s s 1. Choose PPTP/L2TP as the connection type. 2. Check if Username , Password, IP address, Subnet Mask are entered with correct values that you get from your ISP . 5 5 . . 5 5 F F o o r r c c i i n n g g V V i i g g o o r r R R o o u u t t e e r[...]

VigorFly 200 Series User’s Guide 134 11. There is a bar showing the upgrading process. 12. When the firmware upgrade is successf ul, the following window will pop up.[...]

VigorFly 200 Series User’s Guide 135 If the message of Request Timeout. Transfer Abort ! appears, please check if the connection between the computer and the Vigor is active or not. And, if the message of Incorrect/No file name. Transfer Abort ! appears, please check if the firmware you download is correct for your Vigor router. Note: Please turn[...]

VigorFly 200 Series User’s Guide 136 5 5 . . 6 6 B B a a c c k k i i n n g g t t o o F F a a c c t t o o r r y y D D e e f f a a u u l l t t S S e e t t t t i i n n g g I I f f N N e e c c e e s s s s a a r r y y Sometimes, a wrong connection can be im proved by returning to the default settings. Tr y to reset the router by software or hardware. [...]