Dukane 8926H-RJ manual

DUKANE CORP A V SER VICE DEPT 2900 Dukane Drive St Charles, IL 60174 800-676-2487 / 630-762-4032 Fax 630-584-5156 avservice@dukane.com www .dukane.com/av Information in this Guide may change due to product improvements. T o obtain the latest manuals, literature, and software please visit the Dukane web site at; www .dukane.com/av and look at the sp[...]

[...]

1 ENGLISH Projector 8925H-RJ/8926H-RJ/8956H-RJ 8927HW-RJ User's Manual (concise) Thank you for purchasing this projector . Please read through this manual before using this product, in order to use safely and utilize well the product. WARNING ►Before using this product, be sure to read all manuals for this product. After reading them, store [...]

2 Fir st of all Entries and g ra phical symbols e xplanation The following entries and graphical symbols are used for the manuals and the product as follows, for safety purpose. Please know their meanings beforehand, and heed them. Impor tant saf ety instr uction The followings are important instructions for safely using the product. Be sure to fol[...]

3 ENGLISH R e gula tor y notices About Electro-Ma gnetic Interference In CANADA This Class B digital apparatus complies with Canadian ICES-003. In the US, and other places where the FCC regulations are applicable Declaration of Conformity T rade name HIT ACHI 'XNDQH Model Number CP-X2514WN +5- , CP-X3014WN (8926H-[...]

4 Contents of package Y our projector should come with the items shown below . Check that all the items are included. Require of your dealer immediately if any items are missing. (1) Remote control with two AA batteries (2) Power cord (3) Computer cable (4) Adapter cover (5) Lens cover (6) User ’s manuals (Book x1, CD x1) (7) Security label (8) A[...]

5 ENGLISH Pr eparing f or the r emote contr ol Please insert the batteries into the remote control before using it. If the remote control starts to malfunction, try to replace the batteries. If you will not use the remote control for long period, remove the batteries from the remote control and store them in a safe place. 1. Holding the hook part o[...]

6 WARNING ►Install the projector where you can access the power outlet easily. ►Install the projector in a stable horizontal position. • Do not use any mounting accessories except the accessories specified by the manufacturer. Read and keep the manuals of the accessories used. • For special installation such as ceiling mounting, be sure to[...]

7 ENGLISH Connecting with y our devices Before connecting the projector to a device, consult the manual of the device to confirm that the device is suitable for connecting with this projector and prepare the required accessories, such as a cable in accord with the signal of the device. Consult your dealer when the required accessory did not come w[...]

8 Connecting po wer suppl y 1. Put the connector of the power cord into the AC IN (AC inlet) of the projector . 2. Firmly plug the power cord’s plug into the outlet. In a couple of seconds after the power supply connection, the POWER indicator will light up in steady orange. Please remember that when the DIRECT POWER ON function activated, the co[...]

9 ENGLISH T ur ning on the pow er 1. Make sure that the power cord is firmly and correctly connected to the projector and the outlet. 2. Make sure that the POWER indicator is steady orange. Then remove the lens cover . 3. Press the ST ANDBY/ON button on the projector or the remote control. The projection lamp will light up and the POWER indicator [...]

10 Adjusting the pr ojector’ s ele vator When the place to put the projector is slightly uneven to the left or right, use the elevator feet to place the projector horizontally . Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating the front side of the projector within 14 degrees. This projec[...]

11 ENGLISH Displaying the pictur e 1. Activate your signal source. T urn the signal source on, and make it send the signal to the projector . 2. Use the VOLUME + / VOLUME - buttons to adjust the volume. T o have the projector silent, press the MUTE button on the remote control. 3. Press the INPUT button on the projector . Each time you press the bu[...]

12 T ur ning of f the po wer 1. Press the ST ANDBY/ON button on the projector or the remote control. The message “Power off?” will appear on the screen for about 5 seconds. 2. Press the ST ANDBY/ON button again while the message appears. The projector lamp will go off, and the POWER indicator will begin blinking in orange. Then the POWER indica[...]

13 ENGLISH R eplacing the lamp A lamp has finite product life. Using the lamp for long periods of time could cause the pictures darker or the color tone poor . Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. Preparation of a new lamp and early replacement are recommended. T o prepare a [...]

14 HIGH VOL T AGE HIGH TEMPERA TURE HIGH PRESSURE WARNING ►The projector uses a high-pressure mercury glass lamp. The lamp can break with a loud bang, or burn out, if jolted or scratched, handled while hot, or worn over time. Note that each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition,[...]

15 ENGLISH Please check and clean the air filter periodically . When the indicators or a message prompts you to clean the air filter , comply with it as soon as possible. The air filter has two kinds of filters inside. Replace the filters when they are damaged or too soiled. T o prepare the new filters, make contact with your dealer and tell [...]

16 Using the CD manual The other manuals for this product are written into the included CD-ROM titled “User ’s Manual (detailed)”. Before using the CD-ROM, please read the following to ensure the proper use. System r equirements The system for using the CD-ROM requires the following. Windows ® : OS:Microsoft ® Windows ® 98, Windows ® 98SE[...]

17 ENGLISH Item Specification Product name Liquid crystal projector Liquid Crystal Panel +5- , +5- , +5- : 786,432 pixels (1024 horizontal x 768 vertical) +:5- : 1,024,000 pixels (1280 horizontal x 800 vertical) Lamp 210 W UHP Speaker 16 W mono (8 W x 2) Power supply/ Rated current AC 100[...]

18 T r oubleshooting - War r anty and after-ser vice If an abnormal operation (such as smoke, strange odor or excessive sound) should occur , stop using the projector immediately . Otherwise if a problem occurs with the projector , first refer to “T roubleshooting” of User ’ s Manual - Operating Guide and Network Guide , and run through the [...]

19 Screen type 4 : 3 16 : 9 Screen size Projection distance Screen height Screen size Projection distance Screen height H V a min. a max. b c H V a min. a max. b c (inch) m m m inch m inch cm inch cm inch m m m inch m inch cm inch cm inch 30 0.6 0.5 0.8 32 1.0 38 41 16 5 2 0.7 0.4 0.9 35 1.1 42 39 15 -1 0 40 0.8 0.6 1.1 44 1.3 52 55 22 6 2 0.9 0.5 [...]

2 0 F-1 F-2 Access point Computer USB storage device USB wireless adapter (optional) Computer External device[...]

21 F-3 F-4 VCR/DVD/Blu-ray Disc player Monitor Microphone Speakers (with an amplifier)[...]

22 317mm 1 13mm 98mm 288mm F-5 +5-3/86&21&,6([...]