Eiki LC-XT9 manual

✽ Projection lens is optional. MUL TIMEDIA PR OJECT OR MODEL LC-XT9 O WNER'S INSTR UCTION MANU AL[...]

2 CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPE[...]

3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions [...]

4 COMPLIANCES The AC Power Cord supplied with this projector meets the requirement for use in the country you purchased it. AC P ower Cor d for the United States and Canada : AC Power Cord used in the United States and Canada is listed by the Underwriters Laboratories (UL) and certified by the Canadian Standard Association (CSA). AC Power Cord has [...]

5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 17 COMPUTER INPUT 26 VIDEO INPUT 34 SETTING 39 APPENDIX 42 PREP ARA TION 7 NAME OF EACH PART OF PROJECTOR 7 SETTING-UP PROJECTOR 8 CONNECTING AC POWER CORD 8 LENS INSTALLATION 9 POSITIONING PROJECTOR 9 LENS SHIFT ADJUSTMENT 9 PICTURE LEVEL AND TILT ADJUSTMENT 10 INSTALLING PROJECTOR IN P[...]

6 FEA TURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 1.07 billion colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility This projector widely accepts various video and compute[...]

7 PREP ARA TION NAME OF EA CH P AR T OF PR OJECT OR BO TT OM OF CABINET BA CK OF CABINET HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent. ● Keep rear grills at least 3.3’ (1m) away from any object, especially hea[...]

8 PREP ARA TION SETTING-UP PR OJECT OR This projector uses nominal input voltages of 120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single- phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Cons[...]

9 PREP ARA TION POSITIONING PR OJECT OR Before setting up a projector, install Projection Lens on a Projector. 1. Before installation, check where a projector is used and prepare suitable lens. For specifications of Projection Lens, refer to manual separately attached or contact sales dealer where you purchased a projector. 2. For installation, ref[...]

10 PREP ARA TION PICTURE LEVEL AND TIL T ADJUSTMENT Picture tilt and projection angle can be adjusted with handles on both sides of a projector. Projection angle can be adjusted to 5.7 degrees upper way. 1 2 3 LEVEL AND TILT ADJUST HANDLE ADJUSTABLE FEET Height of front feet can be adjusted by turning handles. KNOB Press knob on handle. Handle pop [...]

11 MO VING PR OJECT OR For safety, be sure to hold Carrying Handles on both sides by 2 or more people when moving a projector. Moving it unproperly may result in damage of cabinet or person's injury. Replace lens cap and retract feet to prevent damage to lens and cabinet. 1 2 3 Pull up lock buttons on each side of carrying handles and release [...]

12 CONNECTING PR OJECT OR TERMINALS OF PR OJECT OR This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just by changing Terminal Boards. For Terminal Boards, c[...]

13 CONNECTING PR OJECT OR ANALOG RGB R/Pr G/Y B/Pb H/HV V CONTROL PORT DV I INPUT 1 R/C JACK USB RESET (MONO) (MONO) (MONO) (MONO) CONTROL PORT AUDIO CONTROL PORT INPUT 2 INPUT 3 INPUT 4 AUDIO AUDIO SERIAL PORT IN SERIAL PORT OUT A UDIO OUT R L R L R R L L The port is not functioning in this model. Connect audio output from computer or video equipm[...]

14 CONNECTING PR OJECT OR Connect an external audio amplifier to these jacks. (Refer to P15, 16.) AUDIO OUTPUT JACKS This projector uses a micro processor to control unit. Occasionally, micro processor may malfunction and need to be reset. This can be done by pressing RESET button with a pen, which will shut down and restart unit. Do not use RESET [...]

15 CONNECTING PR OJECT OR ANALOG RGB R/Pr G/Y B/Pb H/HV V CONTROL PORT DVI INPUT 1 R/C JACK USB RESET (MONO) (MONO) (MONO) (MONO) CONTROL PORT A UDIO CONTROL PORT INPUT 2 INPUT 3 INPUT 4 AU DIO A UDIO SERIAL PORT IN SERIAL PORT OUT AUDIO OUT R L R L R R L L CONNECTING T O COMPUTER IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / [...]

16 CONNECTING PR OJECT OR CONNECTING T O VIDEO EQ UIPMENT ANALOG RGB R/Pr G/Y B/Pb H/HV V CONTROL PORT DV I INPUT 1 R/C JACK USB RESET (MONO) (MONO) (MONO) (MONO) CONTROL PORT AUDIO CONTROL PORT INPUT 2 INPUT 3 INPUT 4 AUDIO AUDIO SERIAL PORT IN SERIAL PORT OUT A UDIO OUT R L R L R R L L Video Source (example) Video Cassette Recorder Video Disc Pla[...]

17 BEFORE OPERA TION IMAGE BUTTON Used to select image level. (P31, 36) MENU AU TO PC ADJ. IMA GE SELECT ZOOM FOCUS LENS SHIFT ON-OFF INPUT 1/2 INPUT 3/4 SIDE CONTR OLS AND INDICA T ORS Used to adjust zoom. (P24) INPUT 3/4 BUTTON POWER ON–OFF BUTTON FOCUS BUTTONS Used to select input source either INPUT 3 or INPUT 4. (P26, 34) Used to adjust focu[...]

18 BEFORE OPERA TION READ Y LAMP LAMP REPLA CE W ARNING TEMP . READY INDICATOR LAMP INDICATOR LAMP REPLACE INDICATOR This indicator lights green when a projector is ready to be turned on. And it flashes green in Power Management mode. (P40, 42, 50) This indicator is dim when a projector is turned on. And bright when a projector is in stand-by mode.[...]

19 BEFORE OPERA TION OPERA TION OF REMO TE CONTR OL LIGHT BUTTON Lights the buttons on the remote control for about 10 seconds. Used to select input source. (P26, 34) POWER ON-OFF BUTTON Used to turn projector on or off. (P23) MENU BUTTON Used to select MENU operation. (P21, 22) INPUT 1, 2, 3, 4 BUTTONS AUTO PC ADJ. BUTTON Used to operate AUTO PC A[...]

20 BEFORE OPERA TION 16.4’ (5 m) 60° 16.4’ (5 m) 60° To insure safe operation, please observe following precautions : ● Use (2) AA or LR6 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● Avoid contact with water or liquid. ● Do not expose Remote Control Unit to moistur[...]

21 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU OPERA TION Display ON-SCREEN MENU Press MENU button to display ON-SCREEN MENU (MENU BAR). A red frame is POINTER. Move POINTER (red frame) to MENU ICON that you want to select by pressing POINT LEFT / RIGHT buttons. Adjust ITEM DATA by pressing POINT LEFT / RIGHT buttons.[...]

22 BEFORE OPERA TION MENU B AR PC SYSTEM MENU Used to select computer system. (Refer to P27) IMAGE ADJUST MENU Used to adjust computer image. [Contrast/Brightness /Color Temp. /White Balance (R/G/B) /Sharpness/Gamma /Noise Reduction /Progressive] (Refer to P32) SETTING MENU Used to change settings of projector or reset Lamp Replace Counter. (Refer [...]

23 B ASIC OPERA TION TURNING ON PR OJECT OR TURNING OFF PR OJECT OR TURNING ON / OFF PR OJECT OR Power off? Message disappears after 4 seconds. Connect a projector's AC Power Cord into a wall outlet and turn MAIN ON/OFF SWITCH to ON. LAMP indicator lights RED, and READY indicator lights GREEN. Press POWER ON-OFF button on Side Control or on Re[...]

24 B ASIC OPERA TION KEYST ONE ADJUSTMENT 1 Press KEYSTONE button on Remote Control Unit or select Keystone on SETTING menu. (Refer to page 39.) Keystone dialog box appears. 2 Correct keystone distortion by pressing POINT UP/DOWN button(s). Press POINT UP button to reduce upper part of image, and press POINT DOWN button to reduce lower part. Reduce[...]

25 B ASIC OPERA TION Press FREEZE button on Remote Control Unit to freeze picture on-screen. To cancel FREEZE function, press FREEZE button again or press any other button except POINT UP/DOWN/LEFT/RIGHT and SELECT button. PICTURE FREEZE FUNCTION Press NO SHOW button on Remote Control Unit to black out a image. To restore to normal, press NO SHOW b[...]

26 COMPUTER INPUT SELECTING COMPUTER SYSTEM WHEN SELECT INPUT 1 (D VI INPUT TERMINAL ) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. Press POINT DOWN button to move a red arrow pointer to Input 1 and then press SELECT button. Source Select Menu will appear. 1 2 Input [...]

27 COMPUTER INPUT This projector automatically tunes to most different types of computers based on VGA, SVGA, XGA, SXGA, WXGA or UXGA (refer to “COMPATIBLE COMPUTER SPECIFICATIONS” on page 51-52). When selecting Computer, this projector automatically tunes to incoming signal and projects proper image without any special setting. (Some computers[...]

28 COMPUTER INPUT PC ADJUSTMENT AU TO PC ADJUSTMENT Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots and Picture Position to conform to your computer. Auto PC Adjustment function can be operated as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointe[...]

29 COMPUTER INPUT MANU AL PC ADJUSTMENT This projector can automatically tune to display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from standard ones and may not be tuned by Multi-Scan system of this projector. If this happens, projector cannot reproduce a p[...]

30 COMPUTER INPUT NOTE : Fine sync, Display area, Display area H, Display area V and Full screen cannot be adjusted when “480i”, “575i”, “480p”, “575p”, “720p (HDTV)”, “1035i (HDTV)”, “1080i/50 (HDTV)” or “1080i/60 (HDTV)” is selected on PC SYSTEM Menu (P27). Selects area displayed with this projector. Select resolut[...]

31 COMPUTER INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move a red frame pointer to [...]

32 COMPUTER INPUT Press POINT LEFT/RIGHT buttons to adjust value. Reset all adjustment to previous figure. Reset Store Closes IMAGE ADJUST MENU. Quit Other icons operates as follows. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to [...]

33 COMPUTER INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. When Digital Zoom + is selected, ON-SCREEN MENU disappears and message[...]

34 VIDEO INPUT Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to INPUT Menu icon. Move a pointer to "Y, Pb/Cb, Pr/Cr" and then press SELECT button. 1 3 When connect component video output (Cr, Y, Cb or Pr, Y, Pb) from video equipment to R/Pr, G/Y and B/Pb jacks. WHEN SELECT INPU[...]

35 VIDEO INPUT AV SYSTEM MENU (COMPONENT VIDEO) SELECTING VIDEO SYSTEM Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT buttons to move a red frame pointer to AV SYSTEM Menu icon. Press POINT DOWN button to move a red arrow pointer to system that you want to select and then press SELECT button. 1 2 Projector automatically de[...]

36 VIDEO INPUT PICTURE IMA GE ADJUSTMENT IMA GE LEVEL SELECT (MENU) Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button to move a red frame pointer to IMAGE SELECT Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to level that you want to set and then press SELECT button. Move a red frame pointer to lev[...]

37 VIDEO INPUT Press POINT LEFT/RIGHT buttons to adjust value. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to IMAGE ADJUST Menu icon. 1 2 Press POINT DOWN button to move a red frame pointer to item that you want to adjust and then press SELECT button. Level of each item is displayed[...]

38 VIDEO INPUT PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display desirable image size. Press MENU button and ON-SCREEN MENU will appear. Press POINT LEFT/RIGHT button(s) to move a red frame pointer to SCREEN Menu icon. Press POINT DOWN button and move a red frame pointer to function that you[...]

39 SETTING Ceiling When this function is “On,” picture is top/bottom and left/right reversed. This function is used to project image from a ceiling mounted projector. Rear When this function is “On,” picture is left/right reversed. This function is used to project image to a rear projection screen. Ceiling function Rear function Keystone Wh[...]

40 SETTING This function turns Projection Lamp off when this projector detects signal interruption and is not used for a certain period in order to reduce power consumption and maintain Lamp-life. (This projector is shipped with this function ON.) Power Management function operates to turn Projection Lamp off when input signal is interrupted and an[...]

41 SETTING On start When this function is “On,” projector is automatically turned on just by switching MAIN ON/OFF SWITCH on. Note ; Be sure to turn projector off properly (refer to section “TURNING OFF PROJECTOR” on P23). If projector is turned off in wrong steps, On Start function does not operate properly. This projector provides eight d[...]

42 APPENDIX READ Y LAMP LAMP REPLACE W ARNING TEMP . AIR FIL TER CARE AND CLEANING AIR FILTER AIR FILTER TOP AIR FILTER BASE AIR FILTER MAINTENANCE W ARNING TEMP . INDICA T OR Ventilation Slots of a projector may be blocked. In such an event, reposition a projector so that Ventilation Slots are not obstructed. Air Filter may be clogged with dust pa[...]

43 APPENDIX LAMP MANA GEMENT This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp Management Function. Lamp Management Function detects status of all lamps and shows status on screen or on LAMP REPLACE indicator. This function also automatically controls Lamp Mode when any of lamps is ou[...]

44 APPENDIX Check number of lamp to be replaced on Lamp Status Display. Remove two screws on Lamp Cover and press button to open Lamp Cover. (See right figure.) 1 3 Loosen two screws and pull out Lamp Assembly to be replaced by grasping handle. 4 Turn off a projector and disconnect AC Power Cord. Allow a projector to cool down for at least 45 minut[...]

45 APPENDIX ORDER REPLA CEMENT LAMP Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the following information to the dealer. ● Model No. of y our pr ojector : LC-XT9 ● Replacement Lamp T ype No. : PO A-LMP49 (Service Parts No. 610 300 0862) Move pointer to Lamp counter reset and then press SELECT butto[...]

46 APPENDIX This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps may fail or termin[...]

47 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check matters below once again. 1. Make sure you have connected a projector to your computer or video equipment as described in section "CONNECTING PROJECTOR" on pages 13 ~ 16. 2. Check cable connection. Verify that all computer, video and power cor[...]

48 APPENDIX System (1) SVGA 1 SVGA 2 SVGA 3 Auto PC Adj. Fine sync. Total dots Horizontal Vertical Current mode Clamp Display area Display area - H Display area - V Full screen Reset Mode free Store Quit Standard Real Image 1 Image 2 Image 3 Image 4 Image Adjust Contrast Brightness Color Temp Red Green Blue Gamma Store Quit Normal True Wide Digital[...]

49 APPENDIX V ideo Input Auto 1080i/50 1035i 720p 575p 480p 575i 480i Standard Cinema Image 1 Image 2 Image 3 Image 4 Quit 0 - 63 0 - 63 0 - 63 0 - 63 Off/On Language Image Select System (2) Image Adjust Contrast Brightness Color Tint Red Green Blue Sharpness Reset Store Gamma Progressive 0 - 63 0 - 63 0 - 63 0 - 15 0 - 15 Image 1 Image 2 Image 3 I[...]

50 APPENDIX INDICA T ORS AND PR OJECT OR CONDITION Check the Indicators for projector condition. • • • on : red • • • dim • • • off • • • flashing : red The projector is OFF. (The MAIN switch OFF position or the AC Power Cord is unplugged.) The projector is READY to be turned on with the POWER ON- OFF button. The temperature[...]

51 APPENDIX COMP A TIBLE COMPUTER SPECIFICA TIONS –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (kHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.09 VGA 4 640 x 480 37.86 74.38 VGA 5 640 x 480 37.86 72.81 VGA 6 640 x 480 37.50 75.00 MAC LC13 640 x 4[...]

52 APPENDIX OPTIONAL P ARTS The parts listed below are optionally supplied. When ordering those parts, give the name and Type No. to the sales dealer. ● DVI Board (HDCP Compatible) Type No. : AH-72003 ● 5 BNC Board Type No. : AH-72015 ● Video/Y,C & S-Video Board Type No. : AH-72023 ● D-Sub 15 Board Type No. : AH-72031 ● Network Board [...]

53 APPENDIX Owner’s Manual (CD-ROM) Quick setup manual AC Power Cord Wireless/Wired Remote Control Transmitter and Batteries VGA Cable 6 Types Light-Block Sheet (For option lens) 2 Types Lens Attachment (For option lens) Real Color Manager Pro Accessories TECHNICAL SPECIFICA TIONS 1.8" TFT Active Matrix type, 3 panels Multi-media Projector 8[...]

54 APPENDIX Vcc - Data + Data Ground 1 2 3 4 USB PORT TERMINAL Pin Configuration Connect USB port output terminal of computer or peripheral equipment to this terminal with USB port Cable (not supplied). 2 34 1 CONFIGURA TIONS OF TERMINALS HDB 15-PIN TERMINAL (ANALOG) Connect display output terminal of computer to this terminal with VGA Cable (suppl[...]

55 APPENDIX DIMENSIONS 22.87 (581.0) Unit : inch (mm) Screw Holes for Ceiling Mount Screws: 9-M8 Depth: 0.315 (8.0) 9.90 (251.5) 10.15 (258.0) 5.18 (131.5) 9.90 (251.5) 5.7 ° 2.36 (60.0) 30.83 (783.0) 17.56 (446.0) 22.87 (581.0) 9.25 (235.0) 8.62 (219.0) 17.56 (446.0) 7.01 (178.0) 7.01 (178.0) 4.23 (107.5) 3.26 (82.8) 9.72 (247.0) 14.74 (374.5) 6.[...]

1AA6P1P5346-- (KV6B) © 2006 Eiki International, Inc. A-key to better communications U .S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-457-3454 (949)-457-7878 E-Mail : usa@eiki.com Canada Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Id[...]

- 1 - E LCD PR OJECT OR LENS REPLA CEMENT AND INST ALLA TION PROCEDURES CA UTION When installing or replacing the Projection Lens, ref er to this manual. F or installation of the lens, use the par ts designated in the manual. Do not use the installation manual and Light-Bloc k Sheets in the lens package . Chec k the f ollowing par ts supplied to th[...]

- 2 - E NO TE : The installation procedure and needed par ts f or lens installation depend on the type of the Projection Lens. Chec k the Model No . of the Projection Lens and be sure to install or replace the lens f ollowing procedure below . 1 Remove Lens Cover. Remove 2 Screws A. Push part B and pull Upper Lens Cover up. (See Fig. 1.) 2 Remove 4[...]

- 3 - E LENS LOCK SCREW DRIVER IN THE LENS LOCATE MOTOR ON RIGHT SIDE LENS ATTACHMENT Part No. (910 275 6020) CONNECTOR Fig-4 LENS MOTOR LEAD Fig-5 LENS LOCK LEVER LENS ATTACHMENT SOCKET Lens attachments For each lens. LNS-W01, LNS-W01Z, LNS-W02Z, LNS-W03, LNS-T01, LNS-T01Z, LNS-T02, LNS-T03, LNS-S02, LNS-S02Z, LNS-S03, LNS-M01Z, LNS-W04, LNS-W06 L[...]

- 4 - E 6 This projector has 6 Light-Block Sheets. Use 2 Light-Block Sheets corresponding with lens. (Refer to the list below.) Use 1 Light-block Sheet for MODEL LNS-W03 Set 2 Light-Block Sheets through the lens. Make sure the shape of the Light-Block Sheets are correct and be sure to set them as shown in the Fig. 8. NOTE: ● Be sure to set each L[...]

- 5 - E 7 Adjust focus of the Projection Lens. (LNS-W01, LNS-W01Z, LNS-T01, LNS-T01Z and LNS-W03 only.) Set up the projector and project image on the screen. Loosen Focus Lens Lock Screw and rotate Projection Lens to obtain proper focus. After adjusting focus, be sure to lock Projection Lens with Focus Lens Lock Screw securely. (See Fig. 4.) Adjust[...]

- 6 - E Focus Lock Screw Focus Lock Ring ● mark (yellow) FOCUS ADJUSTMENT (F or Model LNS-W03) Set up the projector and project image on the screen. 1. Loosen the F ocus Lock Scre w on the projection lens. 2. Rotate the projection lens to obtain proper f ocus on center area of the screen. When the distance of the screen and lens is 1 meter , set [...]

- 7 - E BE SURE T O CHECK FOR SAFETY After installing or replacing the lens, be sure to chec k the follo wing for saf ety . 1. Check the lens is securely fix ed with the scre ws. 2. Check no wiring is damaged or tangled on the gear of the lens motor or the other mechanical par ts. 3. Check no part is missing, and no mounting par t is loose. Some pa[...]

- 8 - E NOTE: Following table shows approximate measurement. Actual measurement depends on lens and projectors. SPECIFICA TIONS (Thro w distance and screen siz e, screen of lens shift. ) LENS SHIFT (UP/DO WN) H2 H1 H2 H1 LENS SHIFT (SIDE T O SIDE) W2 W1 W2 W1 Right max Upper max Down max Left max LNS-S02 LNS-S02Z 40 60 80 100 120 150 180 200 250 30[...]