Eizo GS520-BL manual

English Deutsch Français 中文 日本語 Impor tant Please read this User's Manual carefully to f amiliarize yourself with saf e and eff ective usage procedures. Please retain this manual f or future ref erence. Wichtig Bitte lesen Sie diese Bedienungsanleitung sorgf ältig durch, um sich mit dem sicheren und rationellen Betrieb dieses Produ[...]

For U.S.A. , Canada, etc. (rated 100-120 V ac) Only FCC Declaration of Conformity W e, the Responsible Party EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630 Phone: (562) 431-501 1 declare that the pr oduct T rade name: EIZO Model: RadiForce GS520 is in conformity with Part 15 of the FCC Rules. Operation of this product is subjec[...]

It shall be assured that the final system is in compliance to IEC60601-1-1 requirements. English[...]

2 SAFETY SYMBOLS SAFETY SYMBOLS This manual uses the saf ety symbols below . They denote critical information. Please read them carefully . W ARNING F ailure to abide by the inf or mation in a W ARNING may result in serious injur y and can be lif e threatening. CA UTION F ailure to abide by the inf or mation in a CA UTION may result in moder ate in[...]

T ABLE OF CONTENTS 3 PRECA UTIONS .................................................................................................................... 4 1. Introduction .............................................................................................................................. 9 1-1. Features ......................................[...]

4 PRECA UTIONS PRECA UTIONS IMPORT ANT! • This product has been adju sted specifically for use in the reg ion to which it was originally shipped. If operated outside the region to which it was originally shipped, the product may not perform as stated in the specifications. • T o ensure personal safety and proper maintenance, please read[...]

PRECA UTIONS 5 W ARNING If the unit begins to emit smoke, smells like something is burning, or makes strange noises, disconnect all power connections immediatel y and contact your dealer f or advice . Attempting to use a malfunctioning unit ma y result in fire, electric shock, or equipment damage. Do not open the cabinet or modify the unit. Openin[...]

6 PRECA UTIONS W ARNING Use the enclosed po wer cord and connect to the standar d power outlet of y our country . Be sure to remain within the rated v oltage of the power cord. Not doing so ma y result in fire or electric shock. P ower supply: 100-120/200-240 V ac 50/60Hz T o disconnect the po wer cord, grasp the plug firmly and pull. T ugging on[...]

PRECA UTIONS 7 W ARNING Do not touch a damaged LCD panel directl y with bare hands. The liquid cr ystal which leaks from the panel is poisonous if it enters the ey es or mouth. If any par t of the skin or body comes in direct contact with the panel, please wash thoroughly . If some physical symptoms result, please consult your doctor . Lamps contai[...]

8 PRECA UTIONS Notice f or this monitor The backlight of the LCD panel has a fix ed life span. When the screen becomes dar k or begins to flick er , please contact your dealer . The backlight of the LCD panel has a fix ed life span. When the screen becomes dar k or begins to flick er , please contact your dealer . Do not press on the panel or e[...]

1. Introduction 9 1. Intr oduction Thank you for choosing an EIZO Monochrome Monitor . 1-1. Features • DVI (p.35) digital input (TMDS (p.35)) compliant • Horizontal scan frequency 31 - 135 kHz • V ertical scan frequency 19.0 - 61.0 Hz (VGA TEXT : 69 - 71 Hz, QSXGA: 19 - 51 Hz,) • Frame synchronous mode 49.0 - 51.0 Hz supported • Resolutio[...]

10 1. Introduction 1-3. Contr ols and Connector s Fr ont (1) Mode Switch Displa ys the CAL Switch menu (p . 23). (2) Enter Switch Displa ys the Adjustment menu, determines an item on the menu screen, and sav es v alues adjusted (3) Directing Switches * 1 (Left, Down, Up , Right) Chooses an adjustment item or increases/decreases adjusted values f or[...]

1. Introduction 11 Side / Rear (6) USB por t (Up) Connects the USB cable in order to use the pro vided software. (7) USB por t (Down) Connects a peripheral USB device . (8) Input signal connectors D VI-D connector (9) Security lock slot * 3 Complies with K ensington’ s MicroSaver security system. (10) Stand * 4 Used to adjust the height and angle[...]

12 2. Installation 2. Installation 2-1. Bef ore Connecting Before connecting your monitor to the PC, change the display screen settings resolution (p. 35) and frequency in accordance with the charts below . Tips • When your computer and monitor support VESA DDC, the appropriate resolution and the refresh rate are set just by plugging your display[...]

2. Installation 13 2-2. Cable Connection NO TE •Be sure that the power switches of both the PC and the monitor are OFF . •Refer to the PC user's manual when connecting the monitor . •Before making a connection for non monochrome signal only specifications, the monitor must be configured. F or more information, refer to “2-3. Environm[...]

14 2. Installation 3 Connect the power cord to the power connector on the rear of the monitor . 4 Thread the power cord and signal cable through the cable holder on the rear of the monitor stand. NO TE •When threading the cables through the cable holder , lead them to the cable entrance side and pinch the projection to open the cable entrance. ?[...]

2. Installation 15 7 T urn on the PC’ s power . The image will appear . If an image does not appear , refer to “7. T roubleshooting” (p. 29) for additional advice. When finished, turn off the PC and the monitor . Tips •Adjust the brightness of the screen depending on the brightness of your environment. •Be sure to take adequate rests. A [...]

16 2. Installation 2-3. En vir onmental Settings The monitor may need to be set in some environment. If you install it for the first time or change environment, set the monitor . • Set the signal corresponding to make a connection for non monochrome signal only specifications. • Set the monitor orientation. If the monitor is in portrait posit[...]

2. Installation 17 Monitor Orientation Display Example Landscape Select this option when using the Landscape orientation. A A P ortrait (SW) Select this option when using the P or trait orientation. Graphics board utility software is used to rotate the displa y image 90 degrees. P ortrait (HW) Select this option when using the P or trait orientatio[...]

18 3. Adjustment and Settings 3. Adjustment and Settings 3-1. Ho w to use the ScreenManager Screen adjustments and settings can be performed with the ScreenManager (OSD) and buttons of the monitor . Adjustment Startup Description ScreenManager menu Enter Switch 3-2. ScreenManager menu (p . 19) CAL Switch menu Mode Switch 3-3. CAL Switch Function (p[...]

3. Adjustment and Settings 19 3-2. ScreenManager menu Using ScreenManager menu controls the screen adjustment and settings. Refer to the “Explanation” column in the following table for each detailed functions. Functions The following table shows all the ScreenManager’ s adjustment and setting menus. Main menu Sub menu Explanation Setup Mode P[...]

20 3. Adjustment and Settings How to use the ScreenMana ger [Entering the ScreenManager] T ouch the enter switch. [Making adjustments and settings] 1. Select the desired submenu icon with the directing switches and touch the enter switch. 2. Select the desired setting icon with the directing switches and touch the enter switch. 3. Make any required[...]

3. Adjustment and Settings 21 Mode Preset Function <Setup>-<Mode Preset> When CAL Switch mode is selected, the computer can be forced to display only specified modes. Use this function when the display modes are restricted or when the display should not be changed needlessly . [How to set] 1. Select <Mode Preset> in the ScreenMan[...]

22 3. Adjustment and Settings Off Timer <Others>-<Off Timer> The off timer function causes the monitor to turn off automatically after a predetermined amount of time has lapsed. This function was created to reduce the afterimages particular to LCD monitors, which appear when the screen is left on for long periods without use. [How to se[...]

3. Adjustment and Settings 23 3-3. CAL Switch Function The most suitable display mode is available by switching the mode switch on the control panel. The <Brightness> settings can be adjusted on the CAL Switch menu. CAL Switch Modes Mode Description 1 - DICOM Used to displa y images in the DICOM mode (p. 35) 2 - Native Select this option to d[...]

24 3. Adjustment and Settings 3-4. Adjustment Loc k Function Use the “Adjustment Lock” function to prevent any accidental changes. Lock ed functions • Displa y , adjustment, and setting of the ScreenManager • Brightness adjustments to the CAL Switch mode Unlock ed function • Selection of the CAL Switch mode with the mode switch [How to lo[...]

4. Brightness Adjustment and Image Adjustment 25 4. Brightness Adjustment and Image Adjustment 4-1. Brightness Adjustment The brightness of the entire screen can be set to a desired level. [How to adjust] 1. Select <Brightness> in the ScreenManager <Mode> menu. 2. Make adjustments with the Left and Right directing switches. The Left dir[...]

26 5. Making use of USB (Universal Serial Bus) 5. Making use of USB (Univer sal Serial Bus) This monitor provides a hub which supports the USB standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be easily connected. Required system en vironment • PC equipped wit[...]

5. Making use of USB (Universal Serial Bus) 27 3 After setting up, the monitor’ s USB hub is available for connecting USB compliant peripherals to the downstream ports of the monitor . Connecting Examples T o use “RadiCS LE” (for Windows) or “ScreenManager Pro f or Medical” (for Windows) Refer to the corresponding User's Manual on th[...]

28 6. Attaching an Ar m 6. Attaching an Arm The LCD monitor can be used with an arm by removing the tilt stand and attaching the arm stand to the LCD monitor . NO TE • If you will use the arm or stand of other manufacturers, confirm the followings to the manufacturers before selecting. - Hole spacing on the arm mounting 100 mm x 100 mm (VESA com[...]

7. T roub leshooting 29 7. T r oubleshooting If a problem persists even after applying the suggested remedies, contact an EIZO dealer . • No picture problems See No.1 ~ No.2 • Imaging problems See No.3 ~ No.6 • Other problems See No.7 ~ No.9 • USB problems See No.10 Prob lems P oints to chec k with possible solutions 1. No picture Indicator[...]

30 7. T roubleshooting Prob lems P oints to chec k with possible solutions 5. The screen has def ective pixels (e.g. slightl y light or dark). • This is due to LCD panel char acteristics and is not a f ailure. 6. Interference patterns or pressure marks remain on the screen. • Leav e the monitor with a white or bla ck screen. The symptom ma y di[...]

8. Cleaning 31 8. Cleaning Periodic cleaning is recommended to keep the monitor looking new and to prolong its operation lifetime. NO TE • Never use thinner , benzene, alcohol, abrasive cleaners, or other strong solvents, as these may cause damage to the cabinet or LCD panel. Cabinet T o remove stains, wipe the cabinet with a soft, lightly moiste[...]

32 9. Specifications 9. Specifications LCD P anel GS520-BL GS520-CL 54cm(21.3 inch), TFT Monochrome LDC panel Surf ace treatment: Anti-Glare Hard Coating Surf ace hardness: 2H Response Time: 50ms GS520-BLG GS520-CLG 54cm(21.3 inch), TFT Monochrome LDC panel Surf ace treatment: Hard Coating Surf ace hardness: 3H Response Time: 50ms Viewing Angle H[...]

9. Specifications 33 Dimensions PIVOT90° 512.5(20.2) 340(13.4) 388(15.3) 35° 35° SWIVEL 424(16.7) 480(18.9) 208.5(8.2) TIL T40° 168(6.6) 325(12.8) 240(9.4) 88(3.46) 61.5(2.42) 78.5(3.09) 272.5(10.7) 24(0.94) 24(0.94) 28(1.1) 28(1.1) 466.5(18.4) 166(6.5) 95(3.74) 173(6.3) 32.5(1.28) 8(0.31) 15(0.59) 82(3.23) Adjustable height 142(5.6) 311(12.2)[...]

34 9. Specifications Network QC Management Software EIZO “RadiNET Pro” V er .3.0.2 or later EIZO “RadiNET Pro Lite” V er .3.0.2 or later Cleaning Kit EIZO “ScreenCleaner” Signal Cable DD200DL-BK Pin Assignment •D VI-D Connector 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 19 20 21 17 18 22 23 24 Pin No. Signal Pin No. Signal Pin No. Signal[...]

10. Glossar y 35 10. Glossar y DICOM(Digital Imaging and Comm unication in Medicine) The DICOM standard was developed by the American College of Radiology and the National Electrical Manufacturer’ s Association of the USA. The DICOM compatible device connection enables to transfer the medical image and information. The DICOM, Part 14 document de?[...]

EMC Inf ormation CA UTION The RadiForce series require special precautions regar ding EMC and need to be installed, put into service and used according to the f ollowing information. Do not use any cab les other than the cables that pro vided or specified by us. Using other cables ma y cause the increase of emission or decrease of immunity . Do no[...]

Immunity test EN60601 test level Compliance level Electromagnetic environment - guidance Conducted RF EN61000-4-6 3V rms 150kHz to 80MHz 3V rms 150kHz to 80MHz Portable and mobile RF communications equipment should be used no closer to any part of the RadiForce series, including cables, than the recommended separation distance calculated from the e[...]

Hinweise zur Auswahl des richtigen Schwenkarms für Ihr en Monitor Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. W enn nicht der zum Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die nachstehenden Hinweise zu berücksi[...]

1st Edition-January , 2008 Printed in Japan. 00N0L402A1 EIZO NANAO CORPORA TION 153 Shimokashiwano, Hakusan, Ishikawa 924-8566 Japan Phone: +81 76 277 6792 Fax:+81 76 277 6793 EIZO NANAO TECHNOLOGIES INC. 5710 W arland Drive, Cypress, CA 90630, U.S.A. Phone: +1 562 431 5011 Fax: +1 562 431 4811 EIZO EUROPE AB Lovangsvagen 14 194 61, Upplands Väsby[...]