Eizo L360 manual

E[...]

2 CONTENTS CONTENTS PRECA UTIONS __________________________ 4 INTRODUCTION ________________________ 10 About this Manual .................................................. 10 P ackage Contents ................................................. 10 Controls & Connectors .......................................... 12 1 INST ALLA TION _______________[...]

3 E CONTENTS 3 MAKING USE OF USB (Desktop Stand T ype Only) ______________ 60 4 TR OUBLESHOO TING _________________ 63 4-1 T roub leshooting ............................................... 63 5 CLEANING __________________________ 67 6 SPECIFICA TIONS ____________________ 68 APPENDIX _____________________________ i Pin Assignment ...................[...]

4 PRECAUTIONS PRECA UTIONS Location of the caution statements on the back panel. IMPOR T ANT! * The manufacturer is not responsible for damage or malfunction caused by improper connection. The power cord should be connected directly to a standard wall power outlet. Gefahr des elektrischen Risk of electric shock. Risk of electric shock. Do not open.[...]

PRECAUTIONS 5 E This manual uses the safety symbols below . They denote critical information. Please read them carefully . Indicates a prohibited action. Indicates to ground for safety . W ARNING Failure to abide by the information in a W ARNING may result in serious injury and can be life threatening. CA UTION Failure to abide by the information i[...]

6 PRECAUTIONS • Do not touch a damaged LCD panel directly with bare hands. Use protective gloves whenever handling a damaged panel. The liquid crystal which leaks from the panel is poisonous if it enters the eyes or mouth. If any part of the skin or body comes in direct contact with the panel, please wash thoroughly . If some physical symptoms re[...]

PRECAUTIONS 7 E • Keep the plastic packing bags away from children and infants. Plastic bags can be dangerous. T o avoid danger of suffocation, keep the bag away from babies and children. • Keep power terminal covers for the optional peripheral unit away from children and infants. Children and infants may accidentally swallow the covers and cho[...]

8 PRECAUTIONS[...]

PRECAUTIONS 9 E • Do not use the power unit hanging in midair . Place it on a solid, flat surface (free mount type only). Do not drop the power unit. Hanging the power unit in midair may result in fire or electric shock. • Do not use the LCD monitor outdoors or inside a car . This LCD monitor has been made specifically for indoor use as a deskt[...]

10 INTRODUCTION About This Manual This manual explains the precautions, features, specifications, and operation of your EIZO LCD monitor . For convenience, a “ScreenManager Quick Reference” guide has been included which shows how to implement basic adjustments with the ScreenManager utility . • This manual applies to the EIZO monitor types: T[...]

E 11 INTRODUCTION Package Contents (Free Mount T ype): • If any of the above-listed items are missing or damaged, please contact your local dealer for assistance. • We recommend that you retain the original packing materials in case of future need. LCD Monitor Signal Cable (MD-C91) P ower Unit Bracket[...]

12 INTRODUCTION Controls & Connector s (Desktop Stand T ype) Front (1) P ower T er minal Cov ers for the Optional P er ipheral (2)Input Signal Selection Button Selects one of two D-Sub connectors as the active input. This feature is only used when two computers are connected to the LCD monitor . (3 ) Auto Adjustment Button Automatically centers[...]

E 13 INTRODUCTION Rear (1) Connector Cover Remove the connector cover of the LCD monitor to connect the signal cables. (2) Rear Cover Remove the rear cover of the LCD monitor to connect the signal cables. (3) D-Sub Connector Holder Used to prevent the D-Sub signal cables from becoming loose or disconnected. (4) 2 x D-Sub mini 15 pin Input Connector[...]

14 INTRODUCTION Contr ols & Connectors (Free Mount T ype) Front (1) P ower terminal covers f or the optional peripher al (2) Input Signal Selection Button Selects one of two D-Sub connectors as the active input. This feature is only used when two computers are connected to the LCD monitor . (3 ) Auto Adjustment Button Automatically centers the [...]

E 15 INTRODUCTION Rear (1) D-Sub Connector Holder Used to prevent the D-Sub signal cables from becoming loose or disconnected. (2) 2 x D-Sub mini 15 pin Input Connectors (Input Signal 1 and 2) (3) DC IN Connects to the enclosed power unit. (4 ) Maintenance P or t Service use only . (5) Security Lock Allows for connection of a security cable. This l[...]

16 1 INST ALLA TION 1-1Connecting up Please read the appropriate pages f or the LCD connection. Desktop Stand T ype : F rom P age 17 to 21 F ree Mount T ype: F rom P age 22 to 26 PC Settings Before connecting your PC to the L360 LCD monitor , change the display screen settings (resolution and frequency) in accordance with those below . fH: 30 kHz-6[...]

E 17 1 INST ALLA TION Connecting the Cables (Desktop Stand T ype) (1) Be sure that the power switches of both the PC and the LCD monitor are OFF . (2) Remove the D-Sub connector holder . a) Hand-loosen the screws at the center of the holder . b) Pull the holder away while squeezing both sides of the holder . (3) Plug the signal cable (which is mark[...]

18 1 INST ALLA TION Standard PC graphics board Macintosh Please connect the optional Macintosh adapter to the PC before attaching the signal cable. (6) Replacing the connector cover and the rear cover . a) T o close easily , the LCD monitor should be tilted forward as shown in the diagram. • When tilting the panel, take care not to catch your fin[...]

E 19 1 INST ALLA TION c) Insert the rear cover into the inlets at the bottom of the stand. d) Close the rear cover while pushing the push buttons on the top. (7) Plug the power cord into the power connector in the rear of the LCD monitor . Plug the other end into a power outlet. (8) T urn on the monitor’ s main power and then switch on the PC pow[...]

20 1 INST ALLA TION (1) T o open easily the LCD monitor should be tilted forward as shown in the diagram. (2) Pull the rear cover clear while pushing the push buttons on the top. (3) Pull down and remove the connector cover .[...]

E 21 1 INST ALLA TION Connecting two PCs to the Monitor (Example) The EIZO L360 has two video input signal connectors (2 x D-sub mini 15 pin). The priority switch system allows the user to assign priority to either input signal.[...]

22 1 INST ALLA TION Connecting the Cables (Free Mount T ype) (1) Be sure that the power switches of both the PC and the power unit are OFF . Lay the LCD monitor as shown below . (2) Plug the power unit into the power connector in the rear of the LCD monitor . (3) Remove the D-Sub connector holder . a ) Hand-loosen the screws at the center of the ho[...]

E 23 1 INST ALLA TION (4) Plug the signal cable (which is marked “LCD”) into the D-Sub connector (Signal 1) at the rear of the monitor . Please ensure that the arrow mark on the casing of the connector is visible when connecting. See note. When connecting the signal cable, check that the shape of the cable connector matches the shape on the LCD[...]

24 1 INST ALLA TION • In case of using this LCD monitor with an arm-stand in an office workspace, the arm-stand shall be chosen and used carefully: - Use only an approved arm-stand (e.g. GS). - The arm-stand shall have sufficient stability (mechanical firmness) due to the load with this monitor included the optional parts which we recommend. (sui[...]

E 25 1 INST ALLA TION Macintosh Please connect the optional Macintosh adapter to the PC before attaching the signal cable. (8) Plug the power cord into the power unit, and plug the other into a power outlet. • In case of setting the plural free mount type monitors, please be sure to observe the followings. * Do not pile the power units. * Set the[...]

26 1 INST ALLA TION Input signal selection button MD-C91 Macintosh Adapter DSCR-153 (optional) Apple Macintosh PC compatible Connecting two PCs to the Monitor (Example) The EIZO L360 has two video input signal connectors (2 x D-sub mini 15 pin). The priority switch system allows the user to assign priority to either input signal. • Use the specif[...]

E 27 2 USING THE SCREENMANA GER 2-1 How to use the ScreenManager About ScreenManager As shown on the display , the ScreenManager is used to adjust the LCD monitor . Adjustments are made using the Enter and Contr ol buttons (up, down, right and left) located on the front panel. ScreenManager Menus ScreenManager consists of a main menu and six sub me[...]

28 2 USING THE SCREENMANAGER Icon Menus Functions Reference Screen menu Each display mode can have various screen parameters adjusted to enhance viewing. There are: * Clock * Phase * Position * Resolution * Contrast / Brightness Ch. 3 (pg. 27) Color menu Use this menu to select color mode: 1, 2 or 3. By adjusting the red, green, and blue color tone[...]

E 29 2 USING THE SCREENMANA GER Icon Menus Functions Information menu Use this feature to review the current ScreenManager settings. The menu contains four pages. Pushing the Enter button selects each page in order. The information displayed for each page is as follows: * Page 1: "Screen" menu settings * Page 2: "Color" adjustme[...]

30 2 USING THE SCREENMANAGER How to use the ScreenManager Entering the ScreenManager Push the Enter button once to display the main menu of the ScreenManager . Enter the Settings (1) T o enter any sub menu icon, highlight the desired icon by using the Control buttons (up, down, right and left) and push the Enter button. The sub menu appears. (2) Us[...]

E 31 2 USING THE SCREENMANA GER • Return & Exit icons T o return to the main menu from the sub menu or exit the ScreenManager , select this icon and push the Enter button. Shortcut keys Brightness and contrast can be adjusted directly without any need to enter the ScreenManager . Pr ess the Control buttons to adjust the settings and then the [...]

32 2 USING THE SCREENMANAGER 2-2 Screen Adjustment About Screen Adjustments Entering the ScreenMananger , select the “Screen” icon and push the Enter button to show the “Screen” menu. “Screen” adjustments for the LCD monitor should be used in suppressing screen flickering and also for adjusting the screen to its proper position. There i[...]

E 33 2 USING THE SCREENMANA GER[...]

34 2 USING THE SCREENMANAGER Procedure Please adjust the screen using the following procedure. (1) Having read the “readme.txt” file, install and run the “Screen Adjustment Program” in the utility disk. Step by step adjustment is provided by the wizard guide. Follow the wizard or the procedures (2) to (8) below . • If the user's oper[...]

E 35 2 USING THE SCREENMANA GER (3) Entering the ScreenManager “Screen” menu . (4) “Clock” Adjustment a ) Select the “Clock” icon and push the Enter button to enter the “Clock” menu. b) If vertical bars of distortion on the screen appear , these can be eliminated by adjusting the right and left buttons. Then look at the illustration[...]

36 2 USING THE SCREENMANAGER (5) “Phase” Adjustment a ) Select the “Phase” icon and push the Enter button to show the “Phase” menu.” b) If horizontal bars appear , these can be eliminated by adjusting the right and left buttons. c) After finishing the adjustment, push the Enter button to memorize the settings and return to the “Scre[...]

E 37 2 USING THE SCREENMANA GER (7) Confirm the “Resolution”. a ) Select the “Resolution” icon and push the Enter button to enter the “Resolution” menu. b) Confirm if the resolution now being displayed is the same as the input resolution. If it is not, adjust the vertical resolution using the up and down buttons and adjust the horizonta[...]

38 2 USING THE SCREENMANAGER (9 ) Exit the ScreenManager a ) T o return to the main menu, select the “Return” icon or push the down button twice, followed by the Enter button. b) T o exit the ScreenManager , select the “Exit” icon and push the Enter button. Double clicking the Enter button at any time also exit the ScreenManager menu. This [...]

E 39 2 USING THE SCREENMANA GER 2. Phase Adjustment This feature eliminates the horizontal bars of distortion. The phase adjustment decides the sampling point for converting the analog input signal to a digital signal. Adjusting the “Phase” after the “Clock” adjustment will produce a clear screen. 3. Position Adjustment This feature control[...]

40 2 USING THE SCREENMANAGER 14 preset timings have been committed to memory . In addition to these settings, a screen can be displayed correctly using the “Clock”, “Phase” and “Position” adjustments if the input signal is one of the following resolutions (640 x 480, 720 x 400, 800 x 600, 832 x 624, 1024 x 768). If the signal is very di[...]

E 41 2 USING THE SCREENMANA GER * In the case of the percentage color flickering between orange and white, please note that this is not an error but actually the most optimum adjustment point. * The brightness of the entire screen is controlled by changing the “Brightness” controls. No contrast adjustment is required except when the graphics bo[...]

42 2 USING THE SCREENMANAGER 2-3 Color Adjustment About Color Adjustments Entering the ScreenManager , select the “Color” icon and push the enter button to show the “Color” menu. The ScreenManager “Color” menu provides 3 color setting modes; 1, 2, and 3. Y ou can also adjust the color settings for each mode and store them for future use[...]

E 43 2 USING THE SCREENMANA GER Custom Color Adjustments By adjusting the red, green and blue color tones for each mode, custom colors can be defined. Please use this function when high precision color adjustment is required. Procedure • Before you attempt to change the colors, always start with the color settings set to the default setting by us[...]

44 2 USING THE SCREENMANAGER • After making the color settings, re-adjust the contrast to get the best definition and color intensity for the displayed image. • “Reset” Y ou can recall the def ault color gain setting for the current color mode (1, 2, 3) using the “Reset” icon. • The values shown in percentages represent the current le[...]

E 45 2 USING THE SCREENMANAGER 2-4 P ower-save Setup About P owerMana ger Entering the ScreenManager , select the “PowerManager” icon and push the Enter button to show the “PowerManager” menu. The PowerManager feature automatically reduces the monitor’ s power consumption during idle periods in accordance with the PCs ScreenSaver software[...]

46 2 USING THE SCREENMANAGER Set-up Procedure Set the monitor’ s power saving environment to match the PC’ s Scr eenSaver software. • For the PC setup , please refer to the user’ s manuals of the PC and the graphics board. There are two power saving settings for the monitor . “VESA DPMS” system works with the VESA DPMS signal. “EIZO M[...]

E 47 2 USING THE SCREENMANAGER VESA DPMS System 1) First, make the appropriate settings for the PC. (See note, page 46.) 2) Then select “VESA DPMS”. 3) Set the delay period, which is the interval that the monitor will wait after receiving a power saving signal from the PC, before entering into a power saving mode. VESA DPMS P ower Saving Method[...]

48 2 USING THE SCREENMANAGER EIZO MPMS System 1) First make the appropriate ScreenSaver settings (Macintosh/Energy Saver) for the PC. 2) Then select “EIZO MPMS”. 3) Set the delay time. This is the interval between the time that the ScreenSaver (Macintosh/EnergySaver) blanks the screen and the time that the monitor enters power saving mode. EIZO[...]

E 49 2 USING THE SCREENMANAGER What is VESA DPMS? The acronym VESA stands for “Video Electronics Standards Association,” and DPMS stands for “Display Power Management Signaling.” DPMS is a communication standard that PCs and graphics boards use to implement power savings at the monitor side. What is EIZO MPMS? EIZO MPMS, "EIZO Monitor [...]

50 2 USING THE SCREENMANAGER 2-5 Other Settings About Other Settings Entering the ScreenManager , select the “Others” icon and push the Enter button to show the “Others” menu. All of the icons shown in the ScreenManager “Others” menu are described below . Screen Size[...]

E 51 2 USING THE SCREENMANAGER What is the “Screen Size ” setup function? The LCD panel consists of a fixed number of pixel elements which are illuminated to form the screen image. The EIZO L360 display panel consists of the following pixel elements: 1024 horizontal pixels and 768 vertical pixels. At the resolution of 1024 x 768, all pixels are[...]

52 2 USING THE SCREENMANAGER Color Enhancer This function is used for expanding the displayable colors from 262,144 to true color (16 million). Adjustment Procedure Please adjust the color enhancer using the following procedure: (1) Select the “Color Enhancer” icon and push the Enter button to show the “On / Off” select menu. (2) Select “[...]

E 53 2 USING THE SCREENMANAGER Border Intensity This function is used for changing the brightness of the black area sur - rounding the displayed image. Adjustment Procedure Please adjust the border intensity using the following procedure: (1) Select the “Border Intensity” icon and push the Enter button to display the adjustment menu. (2) Adjust[...]

54 2 USING THE SCREENMANAGER Input Priority This function is used to select which PC will have priority to control the monitor when utilizing two PCs. As you can see in the picture, there are three settings available: “Signal 1”, “Signal 2” or “Manual”. The default priority setting is “Signal 1”. The monitor constantly checks the in[...]

E 55 2 USING THE SCREENMANAGER 1 The Input Priority function does not automatically re-activate when the monitor has been in the power saving mode. 2 The Input selection button on the front panel can be used to select either Signal 1 or Signal 2 as the active input at any time. Procedure for Input Priority Selection Please set the Input priority us[...]

56 2 USING THE SCREENMANAGER Setup Procedure (1) Select the “Off Timer” icon and press the Enter button to display “Off Timer” select menu. (2) Select “Enable” and press the enter button. (3) Press the right/left key to adjust how long (1 to 23 hours) the monitor should be in the “On Period”. Then, press the enter button to return t[...]

E 57 2 USING THE SCREENMANAGER Beep Use this feature to set the beeper On or Off. If the beeper is On, the LCD monitor will generate beep signals as defined below . If the beeper is Off, the monitor will not beep. Short beep • ScreenManager item selected. • ScreenManager parameter adjusted to minimum or maximum limit. • Input signal selection[...]

58 2 USING THE SCREENMANAGER Menu P osition Use this function to adjust the position of the ScreenManager menu. Procedure for Menu Position Selection Please set the Menu Position using the following procedure: (1) Select the “Menu Position” icon and push the Enter button to display the adjustment menu. (2) Set the position using the right, left[...]

E 59 2 USING THE SCREENMANAGER Procedure for Reset Selection Please reset the default using the following procedure: (1) Select the “Reset” icon and push the Enter button to show the adjust- ment menu. (2) Select “Reset” using the up and down buttons. A confirmation message will appear . (3) Push the Enter button to proceed and return to th[...]

60 3 GETTING THE MOST FROM Y OUR MONITOR (Desktop Stand T ype Only) Desktop Stand T ype provides a hub which supports the USB (Universal Serial Bus) standard. When connecting to a USB compliant PC or another hub, the monitor functions as a hub to which the USB compliant peripherals can be connected. The USB standardized connectors enable the easy c[...]

E 61 3 GETTING THE MOST FR OM Y OUR MONITOR 3) Select “Search for the best driver for your device (recommended).” and click “OK”. 4) Insert the Windows 98 CD-ROM. 5) Select “specify a location” and choose the driver where Windows 98 is installed (e.g., select c: if Windows 98 is in C drive), and click “Next”. 6) Confirm “Generic U[...]

62 3 GETTING THE MOST FROM Y OUR MONITOR USB Specifications USB standard Rev . 1.0 complied self-powered hub Downstream power supply 500 mA for each (Max.) Communication speed 12 Mbps (full), 1.5 Mbps (low) USB ports Upstream port x 1 Downstream ports x 4 T r oubleshooting P oints to check with possible solutions Check that the USB cable is correct[...]

E 63 4 TROUBLESHOOTING 4 TR OUBLESHOO TING P oints to check with possible solutions Check that the power cord is securely connected. T r y pressing a key on the keyboard, or clicking the mouse. (The screen-saver software may be active.) T r y pressing the power button. (The off timer may be active.) Check brightness and contrast settings. Minimum s[...]

64 4 TROUBLESHOO TING Points to c heck with possible solutions Push the Auto adjustment button. See page 36. Confirm the display resolution using the “Resolution” icon in the ScreenManager “Screen” menu. If the resolution is different from the selected display mode, adjust the resolution. See page37,39. Adjust the image position using the ?[...]

E 65 4 TROUBLESHOOTING Prob lems 4) Horizontal bars of distortion appear . 5) The screen is too bright or too dark. 6) after -images appear . 7) The screen has defective pixels (e.g. slightly light or dark). n Others Prob lems 1) The screen is unable to be enlarged. 2) The monitor beeps. 3) The EIZO LCD Utility Disk is unable to be opened. (Macinto[...]

66 4 TROUBLESHOO TING • For problems with USB function, refer to the troubleshooting on page 62. Problems 4) The Auto adjustment button does not work properly . 5) Frequency does not change after installing “Monitor information file” in the attached utility disk on Windows 95. P oints to check with possible solutions The Auto adjustment funct[...]

E 67 5 CLEANING 5 CLEANING W ARNING CA UTION • Keep liquids awa y from the monitor . Spillage into the cabinet may result in fire , electr ic shock, or equip- ment damage . If an object or liquid falls/spills into the cabinet, unplug the monitor immediately . Have the unit chec ked by a qualified service engineer bef ore using it again. • T o e[...]

E 68 6 SPECIFICA TIONS 6 SPECIFICA TIONS L360 (Desktop Stand T ype) Electrical Specifications LCD Panel 38 cm (15 inch), TFT color LCD panel 0.297 mm dot pitch, Anti-Glare Hard Coating V iewing Angle Horizontal: 140°, V ertical: 120° (at Contrast Ratio > 5) Scan Frequency(Horizontal): 3 0 kHz-61 kHz (Automatic) Scan Frequency ( V ertical): 50 [...]

E 69 6 SPECIFICA TIONS L360 (Free Mount T ype) Electrical Specifications LCD Panel 38 cm (15 inch), TFT color LCD panel 0.297 mm dot pitch, Anti-Glare Hard Coating V iewing Angle Horizontal: 140°, V ertical: 120° (at Contrast Ratio > 5) Scan Frequency(Horizontal): 30 kHz-61 kHz (Automatic) Scan Frequency(V ertical): 50 Hz-85 Hz (Automatic) (10[...]

[...]

ii APPENDIX APPENDIX Pin Assignment Pin-Belegung Affectation des Br oches 2 x D-Sub mini 15 pin connectors Pin No. Signal Pin No . Signal 1 Red video 9 No pin 2 Green video 10 Ground 3 Blue video 11 (shor ted) 4 Ground 12 Data 5 No pin 13 H. Sync 6 Red ground 14 V . Sync 7 Green ground 15 Clock 8 Blue ground Shell Ground USB ports (Desktop Stand T [...]

iii APPENDIX A Preset Timing Char t Timing-Übersichten Synchr onisation des Signaux Based on the signal diagram shown below , 14 factory presets have been registered in the monitor's microprocessor . Der integrierte Mikroprozessor des Monitors unterstützt 14 werkseitige Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme). 14 sig[...]

iv APPENDIX Mode Dot Clock Frequencies A : F ront Porch B: Sync P eriod HV HV HV µs/Dot ms/Line µs/Dot ms/Line VGA 640 x 480 25.175 MHz 31.468 kHz 59.941 Hz 0.636 / 16 0.318 / 10 3.813 / 96 0.054 / 2 VGA 720 x 400 28.322 MHz 31.468 kHz 70.087 Hz 0.636 / 18 0.381 / 12 3.813 / 108 0.064 / 2 VESA 640 x 480 31.5 MHz 37.86 kHz 72.81 Hz 0.508 / 16 0.02[...]

v APPENDIX A C: Back P orch D: Blanking Pe riod E:Displa y P eriod F:T otal Cycle H VHVHV H V µs/Dot ms/Line µs/Dot ms/Line µs/Dot ms/Line µs/Dot ms/Line 1.907 / 48 1.048 / 33 6.356 / 156 1.430 / 45 25.442 / 15.254 / 31.778 / 16.683 / 640 480 800 525 1.907 / 54 1.111 / 35 6356 / 180 1.556 / 49 25.422 / 12.712 / 31.778 / 14.267 / 720 400 900 449[...]

vi APPENDIX Dimensions Abmessungen Dimensions Desktop Stand T ype LCD Monitor mm (inches) FRONT VIEW VORDERANSICHT VUE DE F ACE SIDE VIEW SEITENANSICHT VUE DE COTE TOP VIEW DRAUFSICHT VUE D'EN HAUT 397 (15.6) 4 () 5.5 1.7 15. () 6 397 4. ) 04 (1 .5 18° 3° 45. 5 (1 .7) 45 () 9. 1.9 37. 5 1.4 () 9.3 (3 28 ) 8 () 2 3.2 176 6.9 () 56 () 3. 2.1 4[...]

vii APPENDIX A SIDE VIEW SEITENANSICHT VUE DE COTE TOP VIEW DRAUFSICHT VUE D'EN HAUT Free Mount T ype LCD Monitor mm (inches) FRONT VIEW VORDERANSICHT VUE DE F ACE 397 (15.6 ) 45. 5 (1. 7) 45 () 9. 1.9 37. 5 1.4 () 8 () 2 3.2 3 12. 4 17 () 1 38) .4 ( 92 3.2 ()[...]

Congratulations! Y ou have just purchased a TCO’99 approved and labelled product! Y our choice has provided you with a product developed for professional use. Y our purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. Why do we have environment[...]

Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cables, wires, casings and housings. Their purpose is to prevent, or at least to delay the spread of fire. Up to 30% of the plastic in a computer casing can consist of flame retardant substances. Most flame retardants contain bromine or chloride, and[...]

For Europe, etc. (220-240 V ac) Only CE Marking Declaration of Conformity Kind of equipment: Monitor T ype-designation: L360 (Model No. F A-1562) is in compliance with: Council Directive 73/23/EEC EN60950:1992+A1+A2+A3+A4 Council Directive 89/336/EEC EN55022 (classB):1995 EN50082-1:1992 EN61000-3-2:1995 EN61000-3-3:1995 Konformitätserklärung Ger?[...]

For Europe, etc. (220-240 V ac) Only CE Marking Declaration of Conformity Kind of equipment: Monitor T ype-designation: L360 (Model No. F A-1563) is in compliance with: Council Directive 73/23/EEC EN60950:1992+A1+A2+A3+A4 Council Directive 89/336/EEC EN55022 (classB):1995 EN50082-1:1992 EN61000-3-2:1995 EN61000-3-3:1995 Konformitätserklärung Ger?[...]

FCC Declaration of conformity W e, the Responsible Party EIZO Nanao T echnologies Inc. 5710 W arland Drive, Cypr ess, CA 90630 Phone: (562) 431-5011 declare that the product T rade name: EIZO Model: FlexScan L360 (Desktop Stand T ype) Model No: F A-1562 Model: FlexScan L360 (Free Mount T ype) Model No: F A-1563 is in conformity with Part 15 of the [...]