Electrolux 2060 D manual

2060 D Cooker hood Operating and Installation Instructions[...]

2 Contents Safety warnings 3 For the User 3 For the Installer 3 Description of the Appliance 5 Extractor version 5 Filter V ersion 5 Control Panel 6 Maintenance and care 8 Cleaning the hood 8 Metal grease filter 8 Removing the metal grease filter 8 Charcoal filter 9 Changing the light bulb 1 0 What to do if 1 1 Service and Spare Parts 1 2 Guarantee[...]

3 Safety warnings For the User • The cooker hood is designed to extract unpleasant odours from the kitchen, it will not extract steam. • Always cover lighted elements, to prevent excess heat from damaging the appliance. In the case of oil, gas and coal fired cookers it is essential to avoid open flames. • Also, when frying, keep the deep fryi[...]

4 • It is advisable to apply for authorization from the relevant controlling authority when connecting the outlet to an unused chimney flue or combustion gas duct. The air outlet installation must comply with the regulations laid down by the relevant authorities. • When the unit is used in its extractor version, a sufficiently large ventilation[...]

5 Description of the Appliance • The hood is supplied as an extractor unit and can also be used with a filtering function by fitting one charcoal filter . • Y ou will need an original AEG charcoal filter for this function (Available from you local AEG Service Force Centre). Extractor version • The air is discharged to the outside through a ho[...]

6 Control Panel • Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated. Turn the hood on a few minutes before you start cooking, you will then get an under pressure in the kitchen. The hood should be left on after cooking for about 15 minutes or until all the odours have disappear[...]

7 LED Indicator lights for veryfying the saturation of filters This hood is supplied without a charcoal filter . If the hood is to be used in the recirculation mode with a charcoal filter , the saturation indicator must be activated as follows: Depress and hold the A and B buttons simultaneously for 3 seconds. Initially only the LED indicator signa[...]

8 Maintenance and care • The hood must always be disconnected from the electricity supply before beginning any maintenance work. Cleaning the hood • Clean the outside of the hood using a damp cloth and a mild deter- gent. • Never use corrosive, abrasive or flammable cleaning products. • Never insert pointed objects in the motor’s protecti[...]

9 Dishwasher Place grease filters in dishwasher . Select the most powerful washing programme and highest temperature, at least 65°C. Repeat the process. Refit the grease filters when they are dry . When washing the metal grease filter in the dishwasher a slight discolouration of the filter can occur , this does not have any impact on its performan[...]

10 W arning • Failure to observe the instructions on cleaning the unit and changing the filters could cause a fire hazard. Y ou are therefore strongly recommended to follow these instructions. • The manufacturer declines all responsibility for any damage to the motor or any fire damage linked to inappropriate maintenance or failure to observe t[...]

11 What to do if If your appliance fails to work properly please carry out the following checks. Symptom Solution The cooker hood will not start... Check that: The hood is connected to the electricity supply. Check that the fan speed control is set to 1, 2 or 3. The cooker hood is not working Check that: effectively.. The fan speed is set high enou[...]

12 Service and spare parts In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning 08705 929 929 Y our call will be automatically routed to the Service Centre covering your post code area. For the address of your local Service Force Centre and further infor[...]

13 Guarantee conditions AEG offer the following guarantee to the first purchaser of this appliance. 1. The guarantee is valid for 12 months commencing when the appliance is handed over to the first retail purchaser , which must be verified by purchase invoice or similar documentation. The guarantee does not cover commercial use. 2. The guarantee co[...]

14 Before you move please contact your nearest Customer Care Centre, listed below, to give them details of your new home. They will then ensure that the local Service Organisation is aware of your move and able to look after you and your appliances. France Senlis +33 (0) 44 62 29 29 Germany Nürnberg +49 (0) 800 234 7378 Italy Pordenone +39 (0) 800[...]

15 T echnic Details Models 2060 D Dimensions - extractor ver (in cm): Height 81-126.5 Width 89 ,8 Depth 5 1 Dimensions - filter version (in cm): Height 81-136 Width 89 ,8 Depth 5 1 Maximum absorbed power: 215 W Motor absorption: 1 x 130 W Lighting: 4 x 20W Length of the cable : 150 cm Mounting accessories included 6 wall plugs Ø 8 mm 6 wood-screws[...]

16 Electrical connection Safety warnings for the electrician The electric outlet should be placed inside the chimney .The hood has a power cable, 150 cm, with earth connection and the rated voltage is 220 - 240 V . Connect the hood to the mains supply via a double pole switch which has 3 mm minimum separation between the contacts. This switch must [...]

17 W all unit mounting - Fig. 6 • Position the template (1) on the wall and mark the position, and drill (2) the holes (2 x Ø 8 mm). • Mount the two rawl plugs with the hooks (3) . • Hang the hood on the hooks and level it with the adjustment screws (4) . • Remove the grease filters (5) and mark for the two screws (6) . Remove the hood and[...]

18 Fig. 6 K-S S K Electric hob 500 mm Gas hob 650 mm Charcoal and oil 700 mm[...]

19 Exhaust tube Ø 150mm Power outlet Wall bracket Electric hob 500 mm Gas hob 650 mm Charcoal and oil 700 mm Electric hob 500 mm Gas hob 650 mm Charcoal and oil 700 mm[...]

AEG Hausgeräte GmbH Postfach 1036 D-90327 Nürnberg http:// www .aeg.hausgeraete.de © Copyright by AEG LI1VFB Ed. 04/02[...]