Electrolux 241927600 manual

24 1927600 Nov ember 2007 U se & Car e Guide Ice Maker Guia de U so y Cuidado Máquina de hielo Guide d’utili s ation et d’entretien Machine à glaçon s[...]

2 Finding Information Please read and save this guide Thank you f or choosing Electrolux, the new premium brand in home appliances. This Use & Care Guide is par t of our commitment to customer satisf action and product quality throughout the ser vice lif e of your new ice mak er . W e view y our purchase as the beginning of a relationship . T o[...]

3 Finding Information Finding Information ................................................. 2 Please read and save this guide ..............................................2 Keep a record for quick reference ...........................................2 Questions? ..............................................................................2 T able[...]

4 Safety D ANGER RISK OF CHILD ENTRAPMENT . Before you thro w away y our old appliance , take off the doors and lea ve shelves in place so that children ma y not easily c limb inside . Impor tant Safety Instructions Safety Precautions Do not attempt to install or operate your unit until you have read the safety precautions in this manual. Safety it[...]

5 Installation Installation Dimensions Installing the Drain CA UTION PLEASE READ all instructions completely before attempting to install or operate the unit. All ice makers require a connection to the water supply and impr oper hook-up can result in substantial property damage! All water and drain connections MUST BE made by a licensed/qualified [...]

6 Installation Connecting a Drain Pump If a gra vity drain connection is not av ailable, w e strongly recommend the use of the Electrolux EIMP60 drain pump . The Electrolux EIMP60 drain pump is a v ailable through y our Dealer , or direct from Electrolux with complete installation instructions. If a pump other than the Electrolux EIMP60 drain pump [...]

7 Site Pr eparation Preparing the Site 1 P osition the unit on a flat, lev el surface, capable of supporting the entire weight of the unit. Remember that the unit will be significantly heavier once it is fully loaded. 2 The surrounding air temperature m ust be at least 50°F (10°C) but m ust not e xceed 110°F (43°C). 3 The unit must not be loc[...]

8 W ater Supply Connection CA UTION If you are using a filter system y ou will need to have at least 20 psi f or 3 minutes every 15 minutes. Connecting the W ater Supply When connecting the water supply , f ollow these guidelines: • Re view the local plumbing codes bef ore you install the unit. • The water pressure should be between 30 and 120[...]

9 Leveling Leveling the unit 1 Use a le v el to check the le velness of the ice maker from front to bac k and from side to side (see Figure 10). CHECK LEVEL Figure 10 TURN FOOT TO ADJUST Figure 11 2 If the ice maker is not le vel, adjust the f eet on the cor ners of the unit as necessary (see Figure 11). 3 Check the le velness after each adjustment[...]

10 Door Reversal Rever sing the Door (some models) Hole Plug All Electrolux units ma y be left or right hand opening. The door opening is easily re v ersed by moving the hinge hardw are to the opposite side (see Figure 12). T o re v erse the door : 1 Remov e top hinge screw pin from cabinet using a Phillips ® head screwdriv er (see Figure 13). Rem[...]

11 Door Reversal UL312 DOOR CLOSER INSERTS BOSS UL319 BOSS CLRCO008 4 Remov e the two door closer inser ts from the e xisting bottom hinge and install as shown on the new bottom hinge (see Figure 17). Figure 17 5 Remo v e e xisting bottom hinge (3 screws) and remount on opposite side T OP . Remove hinge screw pin. 6 With bottom of door f acing up ,[...]

12 Door Adjustment Adjusting the Door 1/8” 4 If door edge opposite the hinges needs to mov e up, mo ve plate tow ard outside of door . If door edge needs to mov e down, mov e plate tow ard inside of door (see Figure 22). Repeat until top edge of door is parallel with top of cabinet and tighten screws securely . Y our door is aligned at the factor[...]

13 Built-In Installation / Start-Up Installing a Built-In CA UTION DO NO T install unit behind closed doors. Built-In Cabinet Dimensions Model Unit Dimensions Width Height Depth EI15IM55GS 14-15/16” 34-1/8” 24” NO TE T o ease unit installation and remov al, the unit must be located to allo w clearance f or water , drain and electrical connect[...]

14 Operation Normal Operation Ice Cube Thickness Y our Electrolux ice maker uses adv anced technology to make ice that is crystal clear . This technology cascades a flow of w ater ov er a chilled ice mold that is mounted v er tically so no water sits in it. Because of this ice making technology , clear ice cubes diff er significantly from regular[...]

15 Operation Ice Cube Thic kness Adjustment Interval - As Required Ice thickness adjustments are made using the control panel as f ollows: IMPOR T ANT Ice thickness adjustment should only be made one increment at a time. Allow ice mak er production to stabilize f or 24 hours before rechecking ice thic kness. 3. T ouch and release the LIGHT button k[...]

16 Maintenance Special Considerations • F or best perf or mance, k eep the unit out of direct sunlight. • T ur n the unit OFF and dispose of an y ice cubes if the unit will not be used f or 5 da ys or more. Prop door open to allow f or air circulation and pre v ent mold and mildew . • If the ambient temperature is e xpected to drop below 45°[...]

17 Maintenance W ARNING Disconnect electric power to the ice maker before c leaning the condenser . T o remov e and replace the grille for access to the condenser fins f ollow this procedure (see Figure 29): 1 Remo v e the screws at each end of the g rille. 2 Remo v e the grille. Condenser Cleaning — Every 3 Months T o maintain operational effi[...]

18 5 Replace the o v erflow tube after all of the water has dr ained from the reser v oir . 6 Star t the cleaning cycle as f ollows: a T ouch and hold the PO WER button. b T ouch and release the LIGHT button three times, then release the PO WER button. c The displa y will show “CL ” to conr m the beginning of the cleaning cycle. 7 When w at[...]

19 Maintenance / Storage, V acation and Moving Inlet Screen Cleaning — Every Y ear The solenoid v alve inlet screen m ust be cleaned at least once each year as f ollows: 1 Shut off the water at the w ater supply v alv e. 2 Pull the unit out to access the back panel. 3 Disconnect electrical power to the unit. 4 Disconnect the entire hose connector[...]

20 T r oubleshooting Bef ore Y ou call For Service If the unit appears to be malfunctioning, read through Normal Operation first. If the problem persists, check the T roubleshooting Guide. Locate the problem in the guide and ref er to the cause and its remedy bef ore calling f or ser vice. The problem could be something v er y simple which can be [...]

21 T r oubleshooting If Service is required If the need f or ser vice arises, contact the dealer from whom the unit w as purchased. State the Model Number and Serial Number and explain the prob lem. The Model and Ser ial Number plate is located inside the unit at the upper right hand cor ner . If you do not kno w the name of the selling dealer or l[...]

22 ICE MAKER W ARRANTY Your ice maker is protected by this w arrant y WARRA NTY PERIOD THROUG H OUR A UTHORIZ ED SERV ICERS, WE WILL: THE CO NSUMER W ILL BE RESPONSIBLE FOR : FULL ONE - YEAR WARRA NTY One ye ar from origin al purc hase date. Pay all costs for r epairi ng or repl acing any par ts of this appli ance whi ch prov e to b e defec tive in[...]