Electrolux ESL 46510 manual

user manual Dishwasher ESL 46510[...]

Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com CONTENTS Safety information 2 Product description 5 Control panel 5 Use of the appliance 7 Setting the water softener 7 Use of dishwasher salt 8 Use of detergent and rinse aid 9 Multitab function 10 Loading cutlery and dishes 10 Setting and starting a washing programme 11[...]

or make a hole in the bottom of the appli- ance. • Do not fill the rinse aid dispenser with other products than the rinse aid, (dish- washer cleaning agent, liquid detergent). This can cause damage to the appliance. • Make sure that the spray arms can move freely before you start a washing pro- gramme. • The appliance can release hot steam if[...]

Electrical connection • The appliance must be earthed. • Make sure that the electrical information on the rating plate ag rees with the power supply. • Always use a correct ly installed shock- proof socket. • Do not use multiple pl ugs and extension cables. There is a risk of fire. • Do not replace or change the mains ca- ble. Contact the[...]

PRODUCT DESCRIPTION 1 2 3 4 5 6 7 8 9 1 Upper basket 2 Water hardness dial 3 Salt container 4 Detergent dispenser 5 Rinse aid dispenser 6 Rating plate 7 Filters 8 Lower spray arm 9 Upper spray arm Visual signal • When the washing programme starts, a red visual signal shows on the floor below the appliance door. Th is red signal stays on until the[...]

1 On/off button 2 Display 3 Delay button 4 Programme button ( down) 5 Programme button (up) 6 Energy saver button 7 Multitab button 8 Reset button 9 Indicators Indicators 1) Salt indicator. It comes on when it is necessary to fill th e salt container. After you fill the container, t he salt in dicator can stay on for some hours. This does not have [...]

Activate the appliance. The appliance is in setting mod e when: • The display shows tw o horizontal status bars. Activate the appliance. The appliance is not in setting mode when: • The display show s the time of the wash - ing programme or of the delay start. – It is necessary to cancel the pro- gramme or the dela y start to go back to the s[...]

Water hardness Water hardness ad- justment German degrees (°dH) French degrees (TH°) mmol/l Clarke de- grees manually elec- troni- cally 43 - 50 76 - 90 7,6 - 9,0 53 - 63 2 1) 9 37 - 42 65 - 75 6,5 - 7,5 46 - 52 2 1) 8 29 - 36 51 - 64 5,1 - 6,4 36 - 45 2 1) 7 23 - 28 40 - 50 4,0 - 5,0 28 - 35 2 1) 6 19 - 22 33 - 39 3,3 - 3,9 23 - 27 2 1) 5 1) 15 [...]

USE OF DETERGENT AND RINSE AID 20 30 M A X 1 2 3 4 + - 1 2 3 4 5 6 7 Use of detergent To help the environment, do not use more than the correct quantity of deter- gent. Obey the inst ructions on the detergent packaging. How to fill the detergent dispenser: 1. Press the release button 2 to open the lid 7 of the detergent dispenser. 2. Put the deterg[...]

You can set the rinse aid dosage be tween position 1 (lowest dosage) and posit ion 4 (highest dosage). Turn the rinse aid selector 4 to increase or decrease the dosage. MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwash er salt. Some types of tablets can contain [...]

SETTING AND STARTING A WASHING PROGRAMME Starting the washing pro gramme without delay start 1. Activate the appliance. Make sure that the appliance is in setting mode. 2. Set the wash ing programme. • The num ber related to th e washing programme flashes in the display. 3. If necessary, set the energy saver func- tion. 4. Close the appliance doo[...]

WASHING PROGRAMMES Programme Type of soil Type of load Programme de- scriptio n Energy saver function 1 1) All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry Yes, with effect 2 Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry Yes, with effect 3 2) Fresh soil Crockery and cut- lery Wash 60 °C Rin[...]

CARE AND CLEANING To remove and clean the filters Dirty filters decrease the washing results. Although the maintenan ce is very low with these filters, make a check at intervals and if necessary, clean them. 1. Turn the filter (A) counterclockwise and remove it out from filter (B). A B 2. Filter (A) has two parts. To disass emble the filter, pull t[...]

Malfunction Possible c ause Possible so lution The appliance does not fill with water. The water tap i s blocked or there is limescale o n it. Clean the wate r tap. The water pressure is too low. Contact your local water au- thority. The water tap is closed. Open the water tap . The filter in the water inlet hose is blocked. Clean the filter. The c[...]

Problem Possible cause Possible solution The spray arms could not turn freely. Incorrect position of the items in the baskets. Make sure that an incorrect po- sition of the items do not cause the blockage of the spray arms. The filters are dirty or not as- sembled and installed correctly. Make sure that the filters are clean and correctly assembled[...]

Water supply 1) Cold water or hot wate r maximum 60 °C Capacity Place settings 9 1) Connect the wa ter inlet hose to a wat er tap with a 3/4'' thread. The rating plate on the inner edge of the appliance door shows the electrical connection data. If the hot w ater comes from al ternative sources of energy, (e.g. solar panels, photovoltaic[...]

electrolux 17[...]

18 electrolux[...]

electrolux 19[...]

117932350-A-1 02011 www.electrolux.com/shop[...]