Elo TouchSystems 1200L manual

[...]

Copyright © 2001 Elo T ouchSystems Inc. All Right s Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without [...]

2 Usage Notice Precautions ................................................................................. 3 Introduction About the Product ....................................................................... 4 Package Overview ...................................................................... 5 Installation Product Overview ..............[...]

3 Usage Notice Warning- T o prevent the risk of fire or shock hazards, do not expose this product to rain or moisture. Warning- Do not open or disassemble the product as this may cause electric shock. Precautions Follow all warnings, pr ecautions and maintenance as r ecom- mended in this user ’ s manual to maximize the life of your unit. Do: G Tu[...]

4 Introduction About the Product This product is a 12.1” SVGA TFT color LCD touchmonitor with the following features: G Direct analog RGB input G Active matrix TFT LCD technology G 12.1” diagonal screen size G 16.7 million displayable colors G SVGA 800 x 600 addressable pixels G Auto-adjustment G Full screen re-scaling capability G 31 ~ 54kHz h[...]

5 RS-232 T ouchscreen Interface Cable Audio-In Cable US/Canada Power Cord Package Overview Check that the following 10 items are present and in good condition: Mac Video Adapter User’s Guide and software CD Manual CD Software VGA Signal Cable European power cable Power Adapter LCD T ouchmonitor[...]

6 Installation Product Overview K Main Unit K Rear View MEN U SELECT LCD T ouchmonitor S tand User Controls Power Switch Ear Phone Audio In Power DC-In Display Input RS-232 T ouch Interface[...]

7 S tart Y our Installation K Tilt Grasp both sides of the monitor screen with your hands and adjust the tilt as desired. K Connecting the T ouchmonitor (Figure 7.1) T o setup this touchmonitor , please refer to the following figure and proce- dures. 1. Be sure all equipment is off. 2. Connect the VGA signal cable from display input connector to th[...]

8 Notice: T o ensur e the LCD display works well with your computer , please configure the display mode of your graphic card to less than or equal to 800 x 600 resolution. Make sure the timing of the display mode is compatible with the LCD display . W e have listed the Compatibility Modes of this LCD display in the appendices for your reference. Po[...]

9 User Controls Front Panel Controls No. / Icon Control Function  MENU Menu button Displays the OSD menus  SELECT Select Selects the adjustment items from OSD menus.  ! Decrease / Select D ecreases value of the adjustment items or selects the functions.  " Increase / Select I ncreases value of the adjustment items or selects the fu[...]

10 How to Use the OSD Menus 1. Press the “MENU” button to pop up the on-screen menu and to toggle between Main Menu Page 1 to Page 3. 2. Choose the adjustment items by pressing the “ SELECT” button. 3. Adjust the value of adjustment items by pressing the “ ! ” & “ " ” buttons. 4. Press the “ MENU” button again to turn o[...]

11 On-Screen Display Menus " Brightness Adjusts the brightness of the image. " Contrast Adjusts the contrast of the display image. " Horizontal Position Adjusts the horizontal position of the image. " V ertical Position Adjusts the vertical position of the image. " T racking Synchronizes the signal timing of the display to [...]

12 " Auto-Adjustment Choose this function to obtain an optimum image. " Re-Scaling If the input resolution is less than 800 x 600, you can select this function to obtain the full screen image. " Display Mode Select this function to demonstrate the display resolution, vertical refresh, and horizontal scan of the current mode. " O[...]

13 " V olume Allows you to control the volume of sound, " Mute Allows you to disable the sound immediately . " Reset Returns the display parameters of the current mode to the factory defaults. Thir d OSD Menu: V olume Mute Reset Main Menu Page 3 " ! + -[...]

14 T r oubleshooting If you ar e experiencing tr ouble with the LCD display , r efer to the following. If the pr oblem persists, please contact your local dealer o r our service center . Please r efer to the back cover of this manual for the phone number of the Elo T ouchSystems office nearest you. Problem: No image appears on screen. " Check [...]

15 W arning Signal Sometimes you will see warning messages fr om the LCD screen. This means that the LCD display cannot r eceive the signal from the computer graphic car d. Ther e are thr ee situations wher e this may happen. Please check the connected cables or contact your local dealer for mor e information. " No Signal This message means th[...]

16 Product Dimensions 340mm/13.4” 286.7mm/1 1.3” 170mm/6.7” Front View Side View T op View[...]

17 T ouchmonitor Specifications 12” LCD T ouchmonitor (ET12-XXWC-1) Specifications e p y T y a l p s i D r o t s i s n a r t m l i f n i h t , x i r t a m e v i t c A y a l p s i d l a t s y r c d i u q i l , ) T F T ( e z i Sl a n o g a i d h c n i - 2 1 a e r a n e e r c s l u f e s u m m 5 8 1 x 6 4 2 n o i t u l o s e R e v i t a N0 0 6 x 0 0[...]

18 AccuT ouch T ouchmonitor Specifications l a c i n a h c e M n o i t c u r t s n o Cg n i t a o c e c a f r u s - d r a h e d i s t u o h t i w r e t s e y l o P : p o T . h s i n i f e r a l g i t n a r o r a e l c h t i w . g n i t a o c e v i t c u d n o c t n e r a p s n a r T : e d i s n I e v i t s i s e r m r o f i n u h t i w e t a r t s [...]

19 Compatibility Modes A G V M B I0 5 3 x 0 4 60 75 . 1 3 A G V M B I0 0 4 x 0 4 60 75 . 1 3 A G V M B I0 8 4 x 0 4 60 65 . 1 3 A G V M B I0 0 4 x 0 2 70 75 . 1 3 A G V A S E V0 8 4 x 0 4 62 79 . 7 3 A G V A S E V0 8 4 x 0 4 65 75 . 7 3 A G V A S E V0 8 4 x 0 4 65 83 . 3 4 A G V S A S E V0 0 6 x 0 0 86 52 . 5 3 A G V S A S E V0 0 6 x 0 0 80 69 . 7 [...]

20 Installing the Driver Software Elo T ouchSystems provides driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM for the following operating systems: Windows 2000 Windows 98 Windows 95 Windows NT 4.0 Windows 3. x MS-DOS 2. x or later Additional drivers and driver information for othe[...]

21 2. Follow the directions on the screen to complete the driver setup for your version of Windows. If the AutoSt art feature is not active: 1. Click Start > Run . 2. Click the Browse button to locate the touch.exe pro- gram on the CD-ROM. 3. Click Open , then OK to run touch.exe. 4. Follow the directions on the screen to complete the driver set[...]

22 T o run the INST ALL program: 1. T ype INST ALL at the DOS prompt in the directory con- taining the driver install files. 2. INST ALL asks you to select the sof tware to install. Then choose d:EloDW from the displayed list. 3. INST ALL also asks you for the p aths to use during in- stallation, or you may use its defaults. INST ALL creates direc[...]

23 Regulatory Information I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency , and current require- ments indicated on the manufacturer ’ s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazar[...]

24 c) The user is cautioned that changes or modifications to the equipment not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. 2) If this equipment appears to cause interference with radio or television reception, or any other device: a) V erify as an emission source by turnin[...]

25 W arranty Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and compo- nents of the product are: 3 years monitor , 10 y ears IntelliT ouch scr een, 5 y ears AccuT ouc h screen, 5 ye[...]

26 SELLER’S LIABILITY UNDER THE W ARRANTY SHALL BE LIM- ITED TO A REFUND OF THE PURCHASE PRICE OF THE PR ODUCT . IN NO EVENT SHALL SELLER BE LIABLE FOR THE COST OF PRO- CUREMENT OR INST ALLA TION OF SUBSTITUTE GOODS BY BUYER OR FOR ANY SPECIAL, CONSEQUENTIAL, INDIRECT , OR INCIDENT AL DAMA GES. Buyer assumes the risk and agrees to indemnify Selle[...]