Emerson ATCA-9305 manual

A T C A-9305: A T C A® Blade with Du al Cavium Proces sor s User’ s Ma nual from Emerson Network Power ™ Embedded Computing April 2009[...]

The information in this manual has been checked and is believed to be accurate and reliable . HOWEVER, NO RESPONSIBILITY IS ASSUMED BY EMERSON NET WORK POWER, EMBEDDED C OMPUTING FOR IT S USE OR FOR ANY INA CCURACIES. Specifica t ions are subj ect to change without notice . EMER SON DOES NOT ASSUME ANY LIABILIT Y ARISING OUT OF USE OR O THER APPLIC[...]

10009109-01 AT CA- 9305 User’s Man ual i R e gulator y Agenc y W arnings & Notice s The Emerson A T C A -9305 meets the requiremen ts set for th by the Fede ral Communications Commission (FCC) in T itle 47 of the Code of Federal Regulations. The following information is provided as required by this agency. This device complies with par t 15 o[...]

R e gulator y Agenc y W arnings & Notice s (c ontinued) A TCA-9305 Us er’s Ma nual 10009109-01 ii EC D e c l a r at i o n of C o n fo r m i t y According to EN 45014:1998 Manuf ac turer ’s Na me: Emerson Net work Power Embedded Comput ing Manufacturer’s A ddress: 8310 Exce l sior Drive Madison, Wisconsin 53717 Decl ares th at the f ollowi[...]

R e gulator y Agenc y W arnings & Notice s (c ontinued) 10009109-01 AT CA- 9305 User’s Man ual iii[...]

R e gulator y Agenc y W arnings & Notice s (c ontinued) A TCA-9305 Us er’s Ma nual 10009109-01 iv[...]

10009109-01 AT CA- 9305 User’s Man ual v Contents 1O v e r v i e w Components and Features . . . . . . . . . . . 1-1 Functional Overv iew . . . . . . . . . . . . . . . . 1-3 Additional I n formation . . . . . . . . . . . . . . 1-4 Product Certifi cation . . . . . . . . . . . . . 1-4 RoHS Compliance. . . . . . . . . . . . . . . . 1-5 Terminology a[...]

Contents (continued) A TCA-9305 Us er’s Ma nual 10009109-01 vi Reset Command 4 . . . . . . . . . . . . . . . 5-7 Reset Command 5 . . . . . . . . . . . . . . . 5-7 Reset Command St icky #1 . . . . . . . . 5-7 Reset Command St icky #2 . . . . . . . . 5-8 Boot Device R edirection . . . . . . . . . . 5 -8 Miscellaneous Contr ol . . . . . . . . . . . [...]

Contents (continued) 10009109-01 AT CA- 9305 User’s Man ual vii Get Message Listener List . . . . . . . . 7-45 System Firmware Progress Sensor . . . 7-45 Entities and Ent i ty Associations . . . . . . 7-46 Sensors and Sensor Data Record s . . . . 7-48 FRU Inventory . . . . . . . . . . . . . . . . . . . . . 7-50 E-Keying . . . . . . . . . . . . . [...]

Contents (continued) A TCA-9305 Us er’s Ma nual 10009109-01 viii iminfo . . . . . . . . . . . . . . . . . . . . . . . . . 9-22 isdram . . . . . . . . . . . . . . . . . . . . . . . . 9-22 loop. . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22 memmap . . . . . . . . . . . . . . . . . . . . . . 9-22 moninit . . . . . . . . . . . . . . . . . [...]

10009109-01 AT CA- 9305 User’s Man ual ix Figures Figure 1-1: General System Blo ck Diagram. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Figure 2-1: ATCA-9305 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Figure 2-2: Compone[...]

A TCA-9305 Us er’s Ma nual 10009109-01 x (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual xi Ta b l e s Table 1-1: Regulatory Agenc y Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Table 1-2: Technical References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-6 Table 2-1: Circu[...]

Ta b l e s (c ontinued) A TCA-9305 Us er’s Ma nual 10009109-01 xii Table 7-14: Set FRU LED State Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-21 Table 7-15: Get FRU LED St ate Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-22 Table 7-16[...]

Ta b l e s (c ontinued) 10009109-01 AT CA- 9305 User’s Man ual xiii Table 8-3: Zone 3 Connector, J 30 Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Table 8-4: Zone 3 Connector, J 31 Pin Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-4 Table 8-5: Zone 3 Co[...]

A TCA-9305 Us er’s Ma nual 10009109-01 xiv (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual i Re g i s te r s Register 3-1: Data 31:24 (0x0) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 Register 3-2: Data 23:16 (0x1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

A TCA-9305 Us er’s Ma nual 10009109-01 ii (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual 1-1 Section 1 Overview The A T C A-9305 is an Advanced T elec om Computing Architecture (AdvancedT C A®, A T C A®) blade ba sed on dual Cavium OCTE ON™ CN5860 proc essors and the Fre escale™ Se micon- duc tor MPC8548 management proce ssor . This blade i s targeted at securit y and pack et -pro - cessin[...]

Overview: Compo nents an d Features A TCA-9305 Us er’s Ma nual 10009109-01 1-2 Real-tim e Clock: The STMicroelec tronics M41T00S RT C provides counters for sec onds, minutes, hours, day , date , month, years, and cen tur y . Th e M41T00S serial interface suppor ts I 2 C bus and ha s a super -cap ba ckup capable of maintaining t he clock for a min[...]

Overview: F unc tional Ove r view 10009109-01 AT CA- 9305 User’s Man ual 1-3 FU N C T I O N A L O V E R V I E W The following block d iagram provides a functional over view for the A T C A-9305 : Figure 1-1: Genera l Sy stem B lock Diagr am Console (ENG use only) PCI Bus 10G - 4 PORTS RJ45 RJ45 BCM5482 1 2 Base 3 2 1 0 3 2 1 0 FC2 FC1 10G Fabric [...]

Overview: Additional In form ation A TCA-9305 Us er’s Ma nual 10009109-01 1-4 ADDITIONAL INF ORMATION This sec tion lists the A T C A-9305 hardware’s regulator y certifications and br iefly discusses the terminology and notation con ventions u sed in this manual. It also lists general tec h nical ref ere nces. Mean time between failures (MTBF) [...]

Overview: Additional In form ation 10009109-01 AT CA- 9305 User’s Man ual 1-5 Emerson maintains test reports that provide specific inf ormation regarding the methods and equipment us ed in compliance te sting. Unshielded ex ternal I/O cables, loose screws, or a poorly grounde d cha ssi s ma y adversely a ffect the A TCA-930 5 hardware’s ability[...]

Overview: Additional In form ation A TCA-9305 Us er’s Ma nual 10009109-01 1-6 T erminology and Notation Ac ti ve l ow s ign al s: An active low signal is indica ted with an a sterisk * a f te r the signal name . Byte, word : Throughout this manual by te refers to 8 bits, word ref ers to 16 bits, and long word ref ers to 32 bits, double long wor d[...]

Overview: Additional In form ation 10009109-01 AT CA- 9305 User’s Man ual 1-7 Flash 32 Mbit (x8/x16) Conc u rrent SuperFla sh Data Sheet (Silicon St orage T echnolog y , Inc., S71270-01-000 9 /05) http:/ /www .sst.com mDOC H3 Embedded Flash Driv e (EFD) featuring Embedded T rueFFS® Flash Manag ement Soft ware Preliminary Data Sheet (msystems 92-[...]

A TCA-9305 Us er’s Ma nual 10009109-01 1-8 (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual 2-1 Section 2 Setup This ch apter de scribes the physica l lay out of the boards, th e setu p proces s, and how to check for proper opera t ion once the boards have been installed. This chapter also includes troubleshooting, serv ice , and wa rranty information. ELEC TROSTATIC DISCHARGE Before y ou begin the[...]

Setup: A T C A-9305 Circuit Board A TCA-9305 Us er’s Ma nual 10009109-01 2-2 Figure 2-1: A TCA-9305 Front Panel Not e: The electromagnetic c ompatibilit y (EMC) tests u sed an A TCA-9305 model that includ es a front pane l ass em- bly from Emerson Network Power , Embedded C omputing. Caution : For applications where the A TCA-930 5 is provided wi[...]

Setup: A T C A-9305 Circuit Board 10009109-01 AT CA- 9305 User’s Man ual 2-3 Figure 2-2: Compone nt Map, T op (Rev . 01) + + + + C523 R153 C420 C518 C311 C717 C149 L30 C9 F5 U61 C314 C140 U22 C751 R172 C684 L41 C197 C549 C254 C220 R169 R91 U53 CR7 C54 R187 R146 C740 C508 C491 C544 C644 C592 R199 C2108 U38 C240 C538 C612 R45 C2145 R19 C406 C731 R4[...]

Setup: A T C A-9305 Circuit Board A TCA-9305 Us er’s Ma nual 10009109-01 2-4 Figure 2-3: Compone nt Map, Bottom (R ev. 01) C1882 C1004 C1877 C1442 C1506 C1330 R999 C1499 C1578 C1703 C1914 R831 C1818 R891 C1923 C1829 C941 C859 C1839 C1718 C1710 R597 R700 R534 L72 R406 C1133 R491 R799 R417 R862 C1465 R837 C1878 C933 C1514 R677 R968 C1676 R352 C1207[...]

Setup: A T C A-9305 Circuit Board 10009109-01 AT CA- 9305 User’s Man ual 2-5 Figure 2-4: LED, F use a nd Swit ch Locatio ns, T op CR1 - P2_LED_GPIO12-R CR2 - P2_LED_GPIO13-R CR3 - P2_LED_GPIO14-R CR4 - P2_LED_GPIO15-R CR23 - MIP1_LED1_R CR24 - MIP1_LED2_R CR25 - MIP1_LED3_R CR26 - MIP1_LED4_R CR50 - P1_LED_GPIO12_R1 CR51 - P1_LED_GPIO13_R1 CR52 -[...]

Setup: A T C A-9305 Circuit Board A TCA-9305 Us er’s Ma nual 10009109-01 2-6 Figure 2-5: LED and Switch L ocatio ns, Bottom J16 Front Panel CR54 - Red = LED1R_C ONN Amber = LED1A_C ONN CR55 - LED2_CONN CR56 - LED3_CONN SW2 - Front Pan el Res et Hot Swap CR57 - BLUE_LED_C ONN_K CR56 CR57 CR54 SW2 CR55[...]

Setup: A T C A-9305 Circuit Board 10009109-01 AT CA- 9305 User’s Man ual 2-7 Conne cto rs The A T C A-9305 circuit board has v arious connect ors and headers (see the figures beginning on page 2-3), summarized as f ol lows: J1: This 14-pin JT AG header is u sed for debugging CN5860 processor 2. See Ta b l e 3 - 7 . J3-J6: These 240-pin sockets ar[...]

Setup: A T C A-9305 Setup A TCA-9305 Us er’s Ma nual 10009109-01 2-8 Configuration Header There are a to t al of seve n jumper p a irs on J9 (pins 11-14 are spa re posts). See figure Fig. 2-2 for th e jumper loca tion on the A T C A-9305. Al so refe rence the “Ju mpe r Setting s (0x18)” reg - ister . Figure 2-6: Configu ration H eader , J9 BT[...]

Setup: A T C A-9305 Setup 10009109-01 AT CA- 9305 User’s Man ual 2-9 Po wer Requirements The A T C A-9 305 circuit board uses —48 volts from the backplane to derive 3.3 volts for the IPMC and 12 v olts for pa yload powe r . T able 2-2: T ypical Pow er R equireme nts The exac t power require ments for the A TCA-9305 circuit boar d depend upon th[...]

Setup: A T C A-9305 Setup A TCA-9305 Us er’s Ma nual 10009109-01 2-10 Figure 2-7: Air Flow Graph Hot S wap The A T C A-9 305 can be Hot Swapped, as defined in the AdvancedT C A specification (see ref- eren ce i n Ta b l e 1 - 2 ). This section d escribe s how to inse r t and extract an A T C A-9305 module in a t ypical AdvancedT C A system. (Thes[...]

Setup: Tr o u b l e s h o o t i n g 10009109-01 AT CA- 9305 User’s Man ual 2-11 Insert a board: 1 Insert the A T C A-9305 into an avail able slot. 2 Push i n the fron t panel h andle (tab). The blue Hot Swap LED on the front panel (see Fig. 2 -1 ) fla shes a long blin k to indic ate th at board inser tion is in pro gress and system managemen t so[...]

Setup: Tr o u b l e s h o o t i n g A TCA-9305 Us er’s Ma nual 10009109-01 2-12 • whether y our board h as been cust omized f or options such a s a higher processor s peed or additional memor y • l icen se ag reem ent s (i f a pp li cab le ) If you do not ha ve internet acc ess, please call Eme rson for fur ther assistance : (800) 327-1251 or[...]

Setup: Tr o u b l e s h o o t i n g 10009109-01 AT CA- 9305 User’s Man ual 2-13 Please put the RMA number on the outside of the package so we can handle y our problem efficie ntly. Our service department cannot accep t mate rial received without an RMA num- ber . Comments and Suggestions We welcome and ap preciate your comments on o ur docum enta[...]

A TCA-9305 Us er’s Ma nual 10009109-01 2-14 (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual 3-1 Section 3 Cavium Proce ssor Complex The A T C A-930 5 provides t wo Cavium proces sor complexes. The major devices on eac h complex c onsist of the Cavium CN5860 processor , t wo S tratixGX bridges, SDRAM, RLDRAM®, an I 2 C EEPROM, socke ted ROM, Flash, and the PCI bus int erface. Figure 3-1: Ca vi um P[...]

Cavium Proce ssor Complex: PCI A TCA-9305 Us er’s Ma nual 10009109-01 3-2 The CN5860 and switch route pack ets using SPI -4.2 a nd control inf or mation flow u sing PCI. The CN5860 has t wo SPI-4.2 interfaces with each one suppor ting up to 16 por ts. T wo high- speed S PI -4.2 Alte ra (Stratix™ G X) FPGAs func tion as the S PI -to-X AUI bridge[...]

Cavium Proce ssor Complex: PCI 10009109-01 AT CA- 9305 User’s Man ual 3-3 The CN5860 processor is designed such that another PCI devic e can initialize its memory interfa ce , copy code over PCI into its l ocal memor y spa ce , and th en write a boot release reg - ister . CN5860 Boot Over PCI The PCI bus is con figured to run at 66 MHz in 64-bit [...]

Cavium Proce ssor Complex: PCI A TCA-9305 Us er’s Ma nual 10009109-01 3-4 Cavium Reset Each CN5860 can be reset indepe ndently o f the other proce ssor wit hout aff ecti ng its ope ra- tion. This tas k is performed b y the MPC8548 mana geme nt process or . Figure 3-2: CN5860 Reset Diagram V olt age Monitor Dela y IPMC Stratix II GX XA UI #2 P1 DD[...]

Cavium Proce ssor Complex: Cavium Ethe rnet 10009109-01 AT CA- 9305 User’s Man ual 3-5 CAVIUM ETHERNET The Ethernet address f or your board is a unique iden tifier on a net work. The address con- sists of 48 bit s (MAC [47:0]) divided into t wo equal par ts. Th e upper 24 bits define a unique identifie r that has bee n assigned to Emerson Net wor[...]

Cavium Proce ssor Complex: Cavium Monit or A TCA-9305 Us er’s Ma nual 10009109-01 3-6 CAV IUM MONIT OR The primar y function of the monitor soft ware is to transf er contr ol of the hardwar e to the use r’s applicat ion. Second ar y responsib ilitie s inclu de: • low-leve l initializa tion of the h ardware •d i a g n o s t i c t e s t s •[...]

Cavium Proce ssor Complex: Cavium Monit or 10009109-01 AT CA- 9305 User’s Man ual 3-7 Figure 3-4: Power -up/Reset CN5860 Boot Sequ ence Flowc hart Diagnostic T ests D uring Po wer-up and Reset The Cavium monitor diagnostic te st s can be execut ed dur ing power -up or inv oked from the monitor’s command promp t. This is accomplished by changing[...]

Cavium Proce ssor Complex: Cavium Monit or A TCA-9305 Us er’s Ma nual 10009109-01 3-8 T able 3-4: POST Diagno stic Results–Bit Assignments Cavium Environment V a riables The following table lists the standard Cavium environmen t variables : T able 3-5: Stand ard Cavium Environment V ariables Bit: Diagnostic Te s t : D e s c r i p t i o n : Va l[...]

Cavium Proce ssor Complex: Memor y 10009109-01 AT CA- 9305 User’s Man ual 3-9 MEMORY The processor complex support s DDR2 Synchronous DRAM (SDRAM) and Reduced Late nc y DRAM (RLDRAM) memory devices. DDR2 SDRAM The A T C A-930 5 suppor ts up to 16 gigabytes of 144-bit wide DDR2 SDRAM per processor complex. The SDRAM inter face clock speed frequenc[...]

Cavium Proce ssor Complex: Stra tixGX Int erc onnec t A TCA-9305 Us er’s Ma nual 10009109-01 3-10 T able 3-6: Cavium NVRAM Memo r y Map Flash, 512 KB x 8 The 512 KB o f 32-pin PL CC sock eted fl ash star ts a t phys ical addr ess1D4 6,0000 16 and is use d for Eng ineering c ode. The StrataFla s h fe atures high -performance fast a synchronous acc[...]

Cavium Proce ssor Complex: Stra tixGX Int erc onnec t 10009109-01 AT CA- 9305 User’s Man ual 3-11 Registe r 3-2: Data 23:16 (0x1) Registe r 3-3: Data 15:8 (0x2) Registe r 3-4: Data 7:0 (0x3) Bits: R/W: Function: 7R / W D a t a 2 3 6R / W D a t a 2 2 5R / W D a t a 2 1 4R / W D a t a 2 0 3R / W D a t a 1 9 2R / W D a t a 1 8 1R / W D a t a 1 7 0R [...]

Cavium Proce ssor Complex: Stra tixGX Int erc onnec t A TCA-9305 Us er’s Ma nual 10009109-01 3-12 Address Registers Registe r 3-5: Address 9:8 (0x4) Registe r 3-6: Address 7:0 (0x5) Contro l Register The write only Control registe r performs t wo functions: • Writing a value of 0x01 cause s the conte nts of the Data registers to be written t o [...]

Cavium Proce ssor Complex: Stra tixGX Int erc onnec t 10009109-01 AT CA- 9305 User’s Man ual 3-13 Ve r s i o n R e g i s t e r This read-only register tracks the PLD versions. The ve r sion is hard coded in the PLD and changes with every released code change . Ve r sion star t s at 01 16 . Registe r 3-8: Ver s i o n ( 0 x 7 ) Scratch Register All[...]

Cavium Proce ssor Complex: Heade r s and C onnectors A TCA-9305 Us er’s Ma nual 10009109-01 3-14 Perform a read. =>write64b 1d030006 02 Displa y the results. =>read64l 1d030000 Wr it e E xa m p l e: T o write to the FP GA bridge MAC_CMD_CFG regi ster at 0x00C, use the following com- mand s. Set data bits 31:24. =>write64b 1d030000 a9 Set[...]

Cavium Proce ssor Complex: Heade r s and C onnectors 10009109-01 AT CA- 9305 User’s Man ual 3-15 Console S erial P or ts (opti onal) Connectors P6 (proc esso r P1) and P5 (proc essor P2) acce ss the CN5860 proc essors f or Engi- neering d ebu g use on ly . The supported baud rate s for these ports opera te at 9600, 14400, 19200, 38400, 5 7600, an[...]

A TCA-9305 Us er’s Ma nual 10009109-01 3-16 (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual 4-1 Section 4 Management Complex The A T C A-9 305 manage ment complex is comprised of the Freescale MPC8548 p rocessor , CPLD, SDRAM, fla sh, I 2 C EEPROM, Re al -time C lock, and PCI bu s interface . Board po wer -up, booting and monitoring the Cavium processors, PCI bus arbitration, interrupt serv icing, [...]

Management Complex: MPC8548 Proce ssor A TCA-9305 Us er’s Ma nual 10009109-01 4-2 MPC8548 PROCESSOR The MPC8548 processor h as the following fe atures: T able 4-1: MPC8548 Features For more de tailed informa tion, refe rence the F reescale MPC8548E PowerQUICC™ III Int e- grated Process or Family Referenc e Manual. MPC8548 Memor y Map The monito[...]

Management Complex: MPC8548 Proce ssor 10009109-01 AT CA- 9305 User’s Man ual 4-3 Figure 4-2: MPC8548 Memory Map T able 4-2: MPC8548 Address Summary Hex Physical Address: Acce ss Mode: R egister Description: See Page: FFF8,0000 R/W Boot window (512 K B) — FF80.0000 — reserved (7.5 MB) FF70,0000 R/W MPC8548 CC SRBAR (1MB) — FC88,0000 — res[...]

Management Complex: MPC8548 Proce ssor A TCA-9305 Us er’s Ma nual 10009109-01 4-4 FC80,0000 R /W Socketed fla sh, optional (512 KB) 4-7 FC48,0000 — reser ved (3.5 MB) FC40,00DC0 R/W Serial IRQ Inte rr upt 2 5-15 FC40,00D8 R/W Serial IRQ Interrup t 1 5-15 FC40,00D4 R/W LPC Data 5-15 FC40,00D0 R/W Low Pin Count (LPC) Bus Control 5-14 FC40,008C R/[...]

Management Complex: MPC8548 Proce ssor 10009109-01 AT CA- 9305 User’s Man ual 4-5 Chi p Se lec t s The MPC8548 memor y con troller functions as a chip select (CS) generat or to access on- board memory devices. In or der to se lec t on e devi ce ov er an oth er , t he fol low ing chi p se lects hav e been establish ed. T able 4-3: Device Chip Se l[...]

Management Complex: MPC8548 Proce ssor A TCA-9305 Us er’s Ma nual 10009109-01 4-6 Res et Di ag ra m Figure 4-3: MPC8548 Res e t Diagram NAND Flash 1GB x 16 PQ_HRESET* MPC8548 MPC8548 Manage ment Manage ment Processor Processor PQ DDR2 PQ DDR2 SODIMM SODIMM Module Module NOR Flash 4M x 16 Ethernet P ort BCM5461S PQ_SRESET* PQ_TRST* RESET_INDIC A T[...]

Management Complex: Memor y 10009109-01 AT CA- 9305 User’s Man ual 4-7 MEMORY The memory device s in the man agemen t complex c onsist of: • 1 GB DDR2 SDRAM • 512 KB socke ted flash • 8 MB soldered NOR flash (two redundant banks of 4 MB ea ch) • 1 GB solde red NAND flash • 512 Mb or 64 MB soldered NOR fl ash SDRAM This is a specialized,[...]

Management Complex: PCI A TCA-9305 Us er’s Ma nual 10009109-01 4-8 in a dual-b ank architectu re for c oncurrent re ad /write operation with hardware and sof t ware data prot e ction schemes. These de vices star t at physical addresses F000,0000 16 (boot bank 1) and F040 ,0000 16 (boot bank 2). 1 GB x 16 The A T C A-930 5 uses 1 GB of M-Systems D[...]

Management Complex: I2C Inte r fac e 10009109-01 AT CA- 9305 User’s Man ual 4-9 I 2 C INTERFACE The I 2 C inte r face c onsists of the MPC854 8 initializa tion EEPROM, u ser (st orage) NVRAM, SO -CDIMM, and the Real-time Clock (RT C). Th e t wo Atme l t wo -wire serial EEPROMs on the I 2 C interface consist of the Se r ial Clock (SCL) input and t[...]

Management Complex: Man ageme nt Proce ssor He ader and Se rial A TCA-9305 Us er’s Ma nual 10009109-01 4-10 Serial Debug P or t The c onsole port for the m anage men t process or is acces sible vi a the fron t panel mini-B U SB connector P7. The suppor ted baud rate s for these por ts operate at 9600, 14400, 19200, 38400, 57600 , and 115200 bps. [...]

10009109-01 AT CA- 9305 User’s Man ual 5-1 Section 5 Management Proce ssor CPLD The A T C A-930 5 uses a Programmable Logic Devic e (PLD) to provide con trol logic for the local bus. The PLD imple ments variou s regist ers for re set, hardware , and LPC bus communi- cation between the proces sors. MPC8548 PLD REGIST ER SUMMAR Y The PLD registers [...]

Management Proce ssor CPLD: MPC8548 PLD R egister A TCA-9305 Us er’s Ma nual 10009109-01 5-2 Product ID This read-only regist er ide ntifies the boar d as A T C A -9305, and is u sed for PLD c oding. Registe r 5-1: Product ID (0x00) Hardw are V ersion This read-only register tracks hardware re visions. Registe r 5-2: Hardware V ersion (0x04) 0x84[...]

Management Proce ssor CPLD: MPC8548 PLD R egister 10009109-01 AT CA- 9305 User’s Man ual 5-3 PLD Versi on This read-only register tracks PLD revisions. Registe r 5-3: PLD V ersion (0x08) PLL R eset Configur ation Writ e to this register to rec onfigure the SYSCLK to CCB c lock ratio and the CCB t o CORE clock ratio using valid values from the MPC[...]

Management Proce ssor CPLD: MPC8548 PLD R egister A TCA-9305 Us er’s Ma nual 10009109-01 5-4 Registe r 5-5: Hardware Con figuration 0 (0x10) Jumper Settings These read-only bits m ay be rea d by s oft ware to de termine the curre nt jumpe r settings. See the jumper descrip tions on page 2-8. Registe r 5-6: Jumper Settings (0x18) LED Writing a one[...]

Management Proce ssor CPLD: MPC8548 PLD R egister 10009109-01 AT CA- 9305 User’s Man ual 5-5 Registe r 5-7: LED (0x1C) Res et Event This read-only register con t ains the bit corresponding to the mo st recen t eve nt which caused a rese t . When pow er is first applied, the FP_ PSH_BUT TN reset e vent is not la tched into the Re set Even t regist[...]

Management Proce ssor CPLD: MPC8548 PLD R egister A TCA-9305 Us er’s Ma nual 10009109-01 5-6 Registe r 5-9: Res e t Command 1 (0x24) Reset Command 2 The write-only Rese t Command 2 register force s one of sev eral t ypes of MPC8548 rese ts, as shown below . A reset sequence is first ini tiat ed by writing a one to a single valid bit, t hen the PL[...]

Management Proce ssor CPLD: MPC8548 PLD R egister 10009109-01 AT CA- 9305 User’s Man ual 5-7 Reset Command 4 The write-only Re set Command 4 regist er force s one of several types of Cavium 2 re sets, as shown below . A reset sequence is first ini tiat ed by writing a one to a single valid bit, t hen the PLD performs that par ticular rese t, and [...]

Management Proce ssor CPLD: MPC8548 PLD R egister A TCA-9305 Us er’s Ma nual 10009109-01 5-8 Not e: The board pow ers down and powe rs back up whe n the Ca vium p roces sors powe r is back up (b its 0 or 1 are cleare d). Registe r 5-14: Reset C ommand Sticky #1 (0x38) Reset Command Sticky #2 The read/write Rese t Command S tick y #2 regist er for[...]

Management Proce ssor CPLD: MPC8548 PLD R egister 10009109-01 AT CA- 9305 User’s Man ual 5-9 Registe r 5-16: Boot Device R edirection (0x50) Miscellaneous Control This register includes two bit s for m anually toggling the MPC854 8 I 2 C bus. Registe r 5-17: Misce llaneous Control (0x54) Low F requ ency T imer 1 and 2 Registe r s LF TR1 (0x58) an[...]

Management Proce ssor CPLD: MPC8548 PLD R egister A TCA-9305 Us er’s Ma nual 10009109-01 5-10 T able 5-2: Low F requency Timer Settings RTM GPIO State This read-only registe r reads the c urren t state o f the GPIO pins. Registe r 5-18: RTM GP IO Stat e ( 0x 60 ) RTM GPIO Co ntrol This registe r sets the state o f the GPIO pins. These si gnals ar[...]

Management Proce ssor CPLD: MPC8548 PLD R egister 10009109-01 AT CA- 9305 User’s Man ual 5-11 Registe r 5-20: RTM C ontrol (0x68) Cavium 1 C_MUL Clock Divisor Control Use the C_MUL1 registe r to reduce the s peed of th e Cavium CN5 860 proce ssor 1 core . Caution : Do not over -clock the Cavium frequency (bits 6:7 hard strapped). Registe r 5-21: [...]

Management Proce ssor CPLD: MPC8548 PLD R egister A TCA-9305 Us er’s Ma nual 10009109-01 5-12 Registe r 5-22: Caviu m 2 C_MULL C lock Divi sor Con trol (0x74) JT A G This register allows f or manual reprogram ming of the PLDs on the board. Changes t o this register do not tak e effect until af ter a full board rese t. Registe r 5-23: JT AG (0x78)[...]

Management Proce ssor CPLD: MPC8548 PLD R egister 10009109-01 AT CA- 9305 User’s Man ual 5-13 Cavium GPIO Data Out This register is the d ata that will be driven on the GPIO line when the Output enable is se t. Registe r 5-25: Cavium GPIO D ata Out (0x84) Cavium GPIO Data In This register reads the value on the GPIO lines connected to each Cavium[...]

Management Proce ssor CPLD: MPC8548 PLD R egister A TCA-9305 Us er’s Ma nual 10009109-01 5-14 IPMP/IPMC GPIO Control This register provides access (if required) to signals bet ween the KSL CPLD and the IPMP , as well a s to sign als between the KSL CPLD and the IPMC. The lower two bits can request request the power do wn of a Caviu m co re from t[...]

Management Proce ssor CPLD: MPC8548 PLD R egister 10009109-01 AT CA- 9305 User’s Man ual 5-15 Registe r 5-29: LPC Data (0xD4) Serial IRQ Interrupt 1 This is inte rr upt registe r1 for the LPC bus. Registe r 5-30: Serial IRQ In te rrupts 1 (0xD8) Serial IRQ Interrupt 2 This is inte rr upt registe r2 for the LPC bus. Registe r 5-31: Serial IRQ Inte[...]

A TCA-9305 Us er’s Ma nual 10009109-01 5-16 (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual 6-1 Section 6 Ethernet Inter face The A T C A-9305 support s multiple Ethernet interfaces. This ch apter d escribes the Broadcom BCM568 02 switc h, PHYS BCM 5482 and B CM5461S, Ethe rnet addre ss, LEDs and c onnec - tor s. BROADCOM BCM56802 S WITCH The BCM56802 is a 1 6-por t, 10-GbE multi- lay er switch bas[...]

Ethernet Inter face: Ethe rnet Sw itching A TCA-9305 Us er’s Ma nual 10009109-01 6-2 Figure 6-1: Ethernet Switching In terface Diagram Not e: The ph yisc al port numbering starts at 1, as ind ica ted in the figure. How ever , the soft ware port numberin g st ar ts a t 0 . Th er e fo re, t o i ss u e a co mm a nd to a po r t , yo u m us t s ub t r[...]

Ethernet Inter face: MPC8548 Man ageme nt Proce ssor Ethe rnet 10009109-01 AT CA- 9305 User’s Man ual 6-3 VLAN Setup The default VLAN configura tion is defined in Ta b l e 6 - 2 . See page 9-25 for the moni tor vla n comm and . T able 6-2: VLAN Con figuration MPC8548 MANAGEMENT PROCESSOR ETHER N ET ADDRESS The Ethernet address f or your board is [...]

Ethernet Inter face: MPC8548 Man ageme nt Proce ssor Ethe rnet A TCA-9305 Us er’s Ma nual 10009109-01 6-4 00 80 F9 xx yy zz 00 80 F9 is Emerson’s identi fier . The la st three bytes of the Ethernet address c onsis t of the por t (one by te), 0x97(por t 1) or 0x98 ( port 2), f ollowed by the se rial number (t wo byte hexadecimal). The A T CA -93[...]

Ethernet Inter face: MPC8548 Man ageme nt Proce ssor Ethe rnet 10009109-01 AT CA- 9305 User’s Man ual 6-5 12 TSEC1_LINKSPD2 (ye llow LED 2) FP1_LINKSPD2 (yellow LED 2) 13 TSEC1_CHSGND FP1_CHSGND 14 TSEC1_CHSGND FP1_CHSGND Pin: P1 Signal: P3 Signal: (con t inued)[...]

A TCA-9305 Us er’s Ma nual 10009109-01 6-6 (blank page)[...]

10009109-01 AT CA- 9305 User’s Man ual 7-1 Section 7 System Management The A T C A-930 5 provides an inte lligent har d ware manage ment system , as defined in the AdvancedT C A Base Specific at ion (P IC MG ® 3 .0) . Thi s s ys tem im pl ement s a n I ntel lig ent Plat- form M anageme nt Controlle r (IPMC) based on th e BMR -H8S -AMCc® refe re[...]

System Management: IPMI Messaging A TCA-9305 Us er’s Ma nual 10009109-01 7-2 Figure 7-1: IPMC Connections Block Diagram IPMI MESSAGING All IPMI messages con tain a Net work Function Code field, which defines the categor y for a par ticular command. Each ca te gor y has two codes assigned to it–one for requests and one for responses. The code fo[...]

System Management: IPMI Messaging 10009109-01 AT CA- 9305 User’s Man ual 7-3 T able 7-1: Net work F unc tion Codes Hex Code V alue(s): Name: T ype : Name: 00, 01 Chas sis ch assis devic e reques ts/respons es 00 = command/request, 01 = response: common ch assis c ontrol and status function s 02, 03 Bridge bridge reques ts/respons es 02 = request,[...]

System Management: IPMI Messaging A TCA-9305 Us er’s Ma nual 10009109-01 7-4 IPMI Completion Codes All IPMI response messages c onta in a hexadecimal C ompletion Code fie ld that indicate s th e stat us of the operati on. T able 7-2: Com pl e ti on Cod e s Code: Descripti on: Generic Compl etion Codes 00, C0 -FF 00 Command c ompleted normally C0 [...]

System Management: IPMB Pro tocol 10009109-01 AT CA- 9305 User’s Man ual 7-5 IPMB PROTOCOL The IPMB message protocol is designed to be robust and supp or t man y differe nt physical inter faces. Th e IPMC suppo r ts messages over the IPMB inter face. Messages are def ined as either a request or a response , as indicated by the lea s t significant[...]

System Management: S IPL Prot ocol A TCA-9305 Us er’s Ma nual 10009109-01 7-6 • Th e seventh byte and beyond cont ain param eters for specifi c commands (i f requir ed). • The final byte is the two’s-comp leme nt checksum of all o f the message da ta af ter the first checksum. An IPMI response message (s ee Ta b l e 7 - 4 ) is similar to an[...]

System Management: Mes sage Bridging 10009109-01 AT CA- 9305 User’s Man ual 7-7 Figure 7-2: Ex tension C ommand Request Ex a mple Figure 7-3: Ex tension C ommand Respons e Example MESSAGE BRIDGING The Messa ge Bridging fa cility is responsible f or bridging messag es bet ween v arious inte r- faces of the A TCA-930 5 IPMI. The message bridging is[...]

System Management: Mes sage Bridging A TCA-9305 Us er’s Ma nual 10009109-01 7-8 The following example illustrates how the Send/Get Messa ge and Get Addres s Info co m - mands can be u sed by the paylo ad sof tware to get the physical location of the board in the shelf: 1 The payload sof t ware sends the Get Addre ss Inf o co mma nd t o th e B MR-[...]

System Management: S tandard Comm ands 10009109-01 AT CA- 9305 User’s Man ual 7-9 dling, if it is necessar y . If the Receiv e Message Queue is full, the A TCA-930 5 IPMC rejects all requests coming to L UN 10 with the C0h (Node Busy) completion c o de and discards all response s coming to this LUN. STANDARD COMMANDS Th e In tell igen t Per iph e[...]

System Management: S tandard Comm ands A TCA-9305 Us er’s Ma nual 10009109-01 7-10 Set Sensor Thresholds Sensor/Even t 04, 05 26 Get Sensor Thresholds Sensor/E ven t 04, 05 27 Set Sensor E ven t Enable Sensor/E vent 04, 05 28 Get Sensor E vent Enable Sensor/E ven t 04, 05 29 Re ar m Sensor E vents Sensor/E ven t 04, 05 2A Get Sensor E vent Statu [...]

System Management: OEM Boo t Options 10009109-01 AT CA- 9305 User’s Man ual 7-11 Th e IP MC im pl ement s ma ny s ta nda rd I PM I co mman ds. Fo r example , soft ware can us e the watchdog time r commands to monitor the system ’s health. Normally, the soft ware resets the watchdog timer periodically to preve nt it from expi ring. The IPMI spec[...]

System Management: IPMC W at chdog Time r Comm ands A TCA-9305 Us er’s Ma nual 10009109-01 7-12 IPMC W ATCHDOG TIMER COMMANDS Th e IP MC im plem ents a s ta nda rdize d ‘ Watchd og Timer’ that can be used f or a number o f syste m time-out functions by Syste m Man ageme nt Soft ware (SMS) or by the monito r . Set - ting a time-out value of ze[...]

System Management: IPMC W at chdog Time r Comm ands 10009109-01 AT CA- 9305 User’s Man ual 7-13 Monitor POST Time-out: In this mode, the time-out occurred while the watchdog timer wa s being used by the moni- tor f or some purpose othe r than FRB-2 or OS Load W atchdog. OS Load Time-out: The last re set or pow er c yc le was caus ed by the time r[...]

System Management: IPMC W at chdog Time r Comm ands A TCA-9305 Us er’s Ma nual 10009109-01 7-14 Rese t W atchdog Timer Command The Rese t Wa tchdog Time r command is us ed for star ting and restar ting the Wat chdog Timer from the initial countdown value tha t was specified in the Set W atchdog Time r com - mand. If a pretime-out inte rrupt has b[...]

System Management: IPMC W at chdog Time r Comm ands 10009109-01 AT CA- 9305 User’s Man ual 7-15 T able 7-9: Set Watchdog Timer Command T ype: By te: Data Fi eld: Re quest D ata 1 Timer U se [7] 1b=don’t log [6] 1b=the don’t stop timer on Set W atchdog Timer comm an d (new for IPMI v1.5) new paramete r s take e ffect immediate ly. If timer is [...]

System Management: IPMC W at chdog Time r Comm ands A TCA-9305 Us er’s Ma nual 10009109-01 7-16 1. Pote ntial race conditions exist wit h impleme ntation of this option. If the Set Watc hdog Timer command is sent ju st before a pretime-out inte rrupt or time-out is set to occur, the time-out could occur before the comm and is executed . T o av oi[...]

System Management: IPMC W at chdog Time r Comm ands 10009109-01 AT CA- 9305 User’s Man ual 7-17 Res po ns e Dat a 2T i m e r U s e [7] 1b=don’t log [6] 1b=timer is started (ru nning) 0b=timer is stopped [5:3] reserved [2:0] timer use (logged on expiration if “don’t log ” bit = 0) 000b=reserved 001b=Monitor FRB -2 010b=Monitor/POST 011b=OS[...]

System Management: FR U LEDs A TCA-9305 Us er’s Ma nual 10009109-01 7-18 FRU LEDS This sect ion describes the front pane l LEDs con trolled by the IPMC and documents how t o control e ach LED with the standard FRU LED commands. R efere nce the PIC MG ® 3.0 Revisi on 2.0 Advan cedT C A ® Base Specification for more detailed information. The A T [...]

System Management: FR U LEDs 10009109-01 AT CA- 9305 User’s Man ual 7-19 Get FRU LED Properties Command This c ommand allows soft ware to de term ine which LEDs are under IPMC control. T able 7-12: Get FRU L ED P roper tie s Comma nd Get LED Color Capabilities Command LED 1 can be either red or amber , th is command is u sed to de termine the val[...]

System Management: FR U LEDs A TCA-9305 Us er’s Ma nual 10009109-01 7-20 Re sponse Data 1 Comple tion Code CCh If the LED ID contained in the Request da t a is not presen t on the FRU 2 PIC MG I dent ifi er—i ndi cates that this is a PICMG defined group extension command. U se value 00h. 3 LED Color Capabilities—whe n a bit is set, the LED su[...]

System Management: FR U LEDs 10009109-01 AT CA- 9305 User’s Man ual 7-21 Set FRU LED State Command The Set FRU LED S tate comm and allows the state o f the FRU LEDs to be c ontrolled by the manag ement sy stem. T able 7-14: Set FRU L ED Stat e Command T ype: By te: Data Fi eld: Re quest D ata 1 PICMG Ide ntifier—i ndicates th at this is a PICMG[...]

System Management: FR U LEDs A TCA-9305 Us er’s Ma nual 10009109-01 7-22 Get FRU LED S tate Command The Get FRU LED Stat e command allows the state of the FRU LEDs to be controlled by the manag ement sy stem. T able 7-15: Get FRU L ED State Com mand Re quest D ata 6 C olor When Illumin ated—s ets the o ve rride color when LED F unction is 01 h [...]

System Management: FR U LEDs 10009109-01 AT CA- 9305 User’s Man ual 7-23 Res po ns e Dat a 3 L E D S ta te s Bits [7:3] reserved, set to 0 Bit [2] 1b if Lamp T est ha s been e nabled Bi t [1 ] 1b if over ri de s tat e has b een ena ble d Bit [2] 1b if IPMC has a Local c o ntrol stat e 4 Local Control LED Function 00h LED is off (de fault if Local[...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-24 V ENDOR COMMANDS The IPMC suppor ts additional IPMI commands th at are s pecific to Pigeon P oint and/or Emerson. This sec tion provides de tailed descriptions of those extension or SIPL c ommands. T able 7-16: Ve ndor Command Summar y Re sponse Data 9 O ve [...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-25 Get Status The IPMC firmware notifies the payload about change s of all st atus bits exc ept for bits 0-2 by se nding an unprintable charac ter (ASCII 0 7, BELL) ove r the Payload Int erface. The pay- load is expected t o use the Get Status comm and to iden [...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-26 Re sponse Data 5 Bit [7] Graceful R eboot Request If set to 1, in dicates that the payload is reque sted to initia te the graceful reboo t sequenc e Bit [6] Diagnosti c Int errup t Reque st If set to 1, indi cates that a pay load diag nostic interru pt reque[...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-27 Get Serial Interface Properties The Get Serial Inte r face Propert ies c ommand is us ed to get the properties of a particular serial interface. T able 7-18: Get Serial In te rface Properties Command Re sponse Data 7 B its [4:7] Clock Bus 2 Eve nts These bit[...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-28 Set Serial Inter face Properties The Set Se rial In terface Prope r ties comm and is used to set the prope r ties of a particular serial interface. T able 7-19: Set Seria l Interface Proper ties Command Re sponse Data 5 Bit [7] Echo On If this bit is set, th[...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-29 Get Debug Le vel The Get Debug L evel command g ets the c urrent d ebug lev el o f the IPMC firmware . T able 7-20: Get Debug L evel C ommand Set Debug Level The Set Debug L evel c ommand sets the current de bug leve l of the IPM C firmware. T able 7-21: Set[...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-30 Get Hardware Address The Get Hardware Addres s command re ad s the hardware address of the IPMC. T able 7-22: Get Hardware Address Command Set Hard ware A ddress The Set Hardw are Address c ommand allows ov erriding of the hardware address re ad from hardwar[...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-31 Get Handle Switch The Get Handle Switch c ommand reads the state o f the Hot Sw ap handle of the IPMC. Ove r- riding o f the handle sw itch state is al lowed only if the IPMC ope rates in (Manu al) Stand alone mode. T able 7-24: Get Hand le Swi tch Comman d [...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-32 Get Pa yload Communication Time-Out The Get Paylo ad Communica tion Time-Out comm and reads the payload communication time-out value. T able 7-26: Get Payload Communicatio n Time- Out Command Set Pa yload Communic ation Time -Out The Set Pa yload Co mmunica [...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-33 Disable Payload Control The Disable Paylo ad Control c ommand disables payload con trol from the Se rial Debug inter face. T able 7-29: Disable Payload C ontrol Command Res et IP MC The Res et IP MC command allows the payload t o reset the IPMC ov er the SIP[...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-34 Bused Resourc e To s e n d a Bused Resource command to the carrier controller , the payload use s the Bused Res o u rc e co mman d of th e SI PL. T able 7-32: Bused Res ource Command Bused Resourc e Status If the IPMC rec eiv es a Bused Resource command from[...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-35 T able 7-33: Bused R esource S tatus C ommand Graceful Reset The IPMC suppor ts the Graceful Re boot option of the FRU Control comma nd. On re ceiv ing such a comm and, the IPMC sets the Grace ful Reboo t Request bit of the IPMC statu s, sends a status upd a[...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-36 The IPMC does not reset the payload on rec eiving the Gr aceful Reset c ommand or time-out. If the IPMC par ticipation is necessary , the payload must request the IPMC to perform a pay- load reset. The Grace ful Reset c ommand is also used to no ti f y the I[...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-37 T o av oid deadlocks th at may occu r if the pa yload so f t ware does no t respond , the IPMC pro- vides a speci al time-out for the payload shut down sequenc e. If the payload doe s not se nd the Graceful Re set command within a definite period o f time, t[...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-38 Set Local FRU LED State The Set Local FRU LED State command i s used to ch ange the local stat e of a FRU LED . T able 7-38: Set Local FRU LED St ate Command T ype: Byte: Data F ield: Re quest D ata 1:3 PPS IANA Pr iva te En terpris e ID , MS Byte fir st 0x0[...]

System Management: Ve n d o r C o m m a n d s 10009109-01 AT CA- 9305 User’s Man ual 7-39 Get Local FRU LED State The Get Local FRU LED State command is u sed to read the local state of a FRU LED . T able 7-39: Get Local FRU LED State Comman d T ype: Byte: Data F ield: Re quest D ata 1:3 PPS IANA Pr iva te En terpris e ID , MS Byte fir st 0x00400[...]

System Management: Ve n d o r C o m m a n d s A TCA-9305 Us er’s Ma nual 10009109-01 7-40 Update Disc rete Sensor The Up date Di screte Senso r comm and is used to chan ge the state o f a discrete se nsor con- trolled by the payload. T able 7-40: Up date Disc re te Sen sor Co mma nd Update Threshold Sensor The Update Th reshold Sen sor comm and i[...]

System Management: Boo t Devic e Redirection (BDR) 10009109-01 AT CA- 9305 User’s Man ual 7-41 BOOT DEVIC E REDIRECTION (BDR) The IPMC enables the A T C A -9305 to reco ve r from monitor corruption by bootin g from a redundant cop y in another flash device . The mechanism relies on an I PMC soft ware internal watc hdog to expire when c orr upt ed[...]

System Management: Boo t Devic e Redirection (BDR) A TCA-9305 Us er’s Ma nual 10009109-01 7-42 Figure 7-4: Boot Device Diagram Not e: The Boot Devic e Redirection mechanism is disabled whe n booting from the 512 KB socket ed flash. Figure 7-5: Boot Redirection Control Dia g ram Initial b oot attempt is from ATCA-9305 sol dered flash bank 1 Boot d[...]

System Management: Me ssa g e L i s ten er s 10009109-01 AT CA- 9305 User’s Ma nual 7-43 Management Con troller: The co ntrolle r provides a sign als to rese t the paylo ad. Payload : This provides signals t o the controlle r indicating when the payload ha s reset for any re ason, that the payload is powered, and that the payload ha s finished it[...]

System Management: Me ssa g e L i s ten er s A TCA-9305 Use r’s Manual 1000910 9-01 7-44 Add Message Listener The Add Message Listener command adds a specified Network F unc tion and Command to the Message Listene r List. The command returns c ompletion code (0x00) and IANA. If thi s command doe s not complet e succes sfully (e.g., du e to a full[...]

System Management: Syste m Firmware Progre ss Sensor 10009109-01 AT CA- 9305 User’s Ma nual 7-45 Get Message Listener List The Get Message Liste ner List c ommand returns the entire list of subscribed Message Lis- te ners. The c ommand re turns co mpleti on code (0x00) and IAN A . T able 7-44: Get Mes sage L isten er Lis t Com man d SYSTEM FIRM W[...]

System Management: En tities and Entit y A ssoci ations A TCA-9305 Use r’s Manual 1000910 9-01 7-46 The command returns 0xC0 when the IPMC is busy and will retry until the command is suc - cessful. If this c ommand returns 0xCC, the sensor ID is invalid. There is only one sensor on the board, so the sensor ID should always be “0”. When upd at[...]

System Management: En tities and Entit y A ssoci ations 10009109-01 AT CA- 9305 User’s Ma nual 7-47 Figure 7-6: IPMB Enti ty Structure FRU 0 r(82, 0, A0, 0) Inflow T emp Outflow T emp Hot Swap IPMB Phy sical BMC W atchd og F/W Progress SDRAM POST IIC Bus POST Flash POST EthSwitch POST Ver s i o n c h a n g e Async Pld Rst Payl o ad Po we r r(82, [...]

System Management: Se nsor s and Sensor D ata R ecords A TCA-9305 Use r’s Manual 1000910 9-01 7-48 SENSORS AND SENSOR DATA RECORDS The A T CA -9305 imp leme nts a number of se nsors as des cribed in the f ollowing tables. All values are hexadecimal. T able 7-46: IPMI Threshold Sensors T able 7-47: IPMI Discrete Sensors Name: Sensor Ty p e : Eve n[...]

System Management: Se nsor s and Sensor D ata R ecords 10009109-01 AT CA- 9305 User’s Ma nual 7-49 The IPMC implements a Device Sensor Data R ecord (SDR) Repo sitor y that contain s SDRs for the IPMC, the FRU device, and e ach sensor . A system man ageme nt con troller may u se the Get Device SDR command to re ad the repositor y and d ynamically [...]

System Management: FR U Inve ntor y A TCA-9305 Use r’s Manual 1000910 9-01 7-50 Ev ent -generating sensors with a Threshold Eve nt/Reading T ype (0x01) initiate an eve nt mes- sage when a se nsor reading crosses the de fine d th reshold. The default thresholds for a par- ticular sensor are retriev ed by sending the IPMC a Get Sensor Thresholds co[...]

System Management: E-Key i n g 10009109-01 AT CA- 9305 User’s Ma nual 7-51 E- KEY I N G This sect ion details the inte r faces go verned by E -keying and the prot ocols they support. Specifically , this i ncludes the inte r faces implement e d by this product and th e E-k eying defi- nition that corre sponds to each int er face . The IPMC suppor [...]

System Management: HPM.1 Firmware Upgrade A TCA-9305 Use r’s Manual 1000910 9-01 7-52 Base Point -to-Point Connec tivity The A T C A-930 5 suppor ts t wo 10/100/1000BA SE- T por ts on Base Inte r fa ce Ch a nnels 0 and 1, and t wo 10 GbE X AUI p or ts to the F abric chann els. Depe nding on the board configura- tion, either two or six 10 GbE X AU[...]

System Management: IPMC He aders 10009109-01 AT CA- 9305 User’s Ma nual 7-53 HPM.1 Reliable Field U pgrade Procedure The HPM.1 upgrad e procedur e is managed b y a utilit y called the Upgrade A gent. The Impitool utility is used a s an Upgrade Age nt for upgra ding the A TCA-9305 IPMC firmwar e. The Upgrade Ag ent c om municates with the IPMC fir[...]

A TCA-9305 Use r’s Manual 1000910 9-01 7-54 (blank page)[...]

10009109-01 AT C A-9305 User ’s Man ual 8-1 Section 8 Back Panel Connec tors There are multiple connec tors on the A T C A- 9305, refere nce Fig. 2-2 for the ir location. The back panel connector s, Zones 1 through 3, are described in this chapt er . Whether individual back panel connector s are populated on the A TCA-9 305 depends on the specifi[...]

Back Panel Connec tors: Zo n e 2 AT C A - 9 3 0 5 User’s Manual 10009109-01 8-2 ZONE 2 Zone 2 (ZD) defines backplane c onnec tor J23, which suppor ts the data transpor t interface. The Zone 2 connec tor array s uppor ts four inter faces to t he Adva ncedTCA b ackplan e: • Base Node Interface (J23) suppor ts t wo Base channels (10/100/1000 BASE-[...]

Back Panel Connec tors: Zo n e 3 10009109-01 AT C A-9305 User ’s Man ual 8-3 T able 8-2: Zon e 2 Connector , J23 Pin Assignmen ts ZONE 3 These optional Z o ne 3 t ype A connector s, J30, J31, and J33, suppor t a Re ar T ransition Mod - ule (RTM). I/O signals are routed through Z o ne 3 connectors to the RTM to allow se r vicing the A T C A-930 5 [...]

Back Panel Connec tors: Zo n e 3 AT C A - 9 3 0 5 User’s Manual 10009109-01 8-4 T able 8-4: Zon e 3 Connector , J31 Pin Assignmen ts Figure 8-3: Zone 3 C onnec tor , J33 T able 8-5: Zon e 3 Connector , J33 Pin Assignmen ts A: B: C : D: E: F: G: H: 1 RTM_10G3 _ RX0_P RTM_10G3 _ RX0_N RTM_1 0G5 _ RX0_P RTM_1 0G5 _ RX0_N RTM _1 0G 4 _ RX0_P RTM_10G4[...]

10009109-01 A TCA-9305 User’s Manual 9- 1 Section 9 Management Proce ssor Monitor The A T C A-930 5 monitor is based on the Embedded PowerPC Linux Universal Boot (U -Boot) Project p rogram, available under the GNU General Public License (GPL). For instruc tions on how to ob t ain the source c ode for this GPL program, ple ase visit http ://www .e[...]

Management Proce ssor Monitor: Command -Lin e Features A TCA-9305 User’s Manual 10 009109-01 9-2 Figure 9-1: Example MPC8548 Monitor St ar t-up Disp lay This prompt is also displa yed as an indication that the monitor ha s fini shed executing a command or function invok ed at the command prompt (excep t w hen the c ommand loads and jump s to a us[...]

Management Proce ssor Monitor: Ba sic Operation 10009109-01 A TCA-9305 User’s Manual 9- 3 BASIC OPERATION The monitor performs various configuration tasks upon po wer -up or reset. This section describes the mon itor operation during initialization of the A T C A-930 5 board. The flow- char t (see Fig. 9-2 ) illustrat es the power -up and global [...]

Management Proce ssor Monitor: Ba sic Operation A TCA-9305 User’s Manual 10 009109-01 9-4 Figure 9-2: Po wer - up/Rese t Sequence Flowcha rt POST Diagnostic R esults The A T C A-930 5 Powe r-On Self- T est (P OST) diagnostic results are stored as a 32-bit value in I 2 C NVRAM at the offset 0x07F0-0x07FF . Each bi t indicates the result o f a spec[...]

Management Proce ssor Monitor: Monito r R ecov er y and 10009109-01 A TCA-9305 User’s Manual 9- 5 T able 9-2: POST Diagno stic Results–Bit Assignments Monitor SDRAM Usage Monitor SDRAM usage is t ypically around 1 MB for monitor code and stack suppor t. Please note tha t the monitor stack grows downward from below where the monitor c ode reside[...]

Management Proce ssor Monitor: Monito r R ecov er y and A TCA-9305 User’s Manual 10 009109-01 9-6 Recove ri ng th e M on it or 1 Mak e sure that a monitor R OM device is inst alled in the P L CC socket on t he A TCA-9305. 2 V erif y there is a shunt on J9, across pins 1 and 2. 3 Issue the following c ommand, where serial_numbe r is the board’s [...]

Management Proce ssor Monitor: Monito r Comm and 10009109-01 A TCA-9305 User’s Manual 9- 7 ATCA-9305 (1.0) => setenv ethport eTSEC 1 Optionally , save y our settings: ATCA-9305 (1.0) => saveenv TF TP the new monitor (binar y) image to me mor y location 0x100000: ATCA-9305 (1.0) => tftpboot 100000 path _to_file_on_tftp_server Update the m[...]

Management Proce ssor Monitor: Boo t Commands A TCA-9305 User’s Manual 10 009109-01 9-8 Command Help Acc ess all a vailable monit or commands b y pressing the ? k ey or ente ring help . Access the monitor online help for individual c ommands by ty ping help < com man d > . The full com- mand n ame must be e ntered to acc ess the online help[...]

Management Proce ssor Monitor: Boo t Commands 10009109-01 A TCA-9305 User’s Manual 9- 9 T o use ne t work download comm a nds (e.g., bootp , bootvx , rarpboot , tftpboot ), the en vi - ronmen t variables li sted in Ta b l e 9 - 4 must be c onfigured. T o set a static IP , these environ- men t variables m ust be s pecified throug h the comman d li[...]

Management Proce ssor Monitor: Boo t Commands A TCA-9305 User’s Manual 10 009109-01 9-10 Definition: dhcp [loadaddress] [bootfilename] To u s e t h e dhcp comm and, your DHCP server must be c onfigured with the var iables desig- nate d in Ta b l e 9 - 5 . T able 9-5: DHCP Ethernet Configuration rarpboot The rarpboot command boots an image via a n[...]

Management Proce ssor Monitor: File Load C ommands 10009109-01 A TCA-9305 User’s Manual 9-11 FILE LOAD COMMANDS The file lo ad comm ands load files o ver the se rial por t. loadb The loadb comm and l oads a binary file ove r th e serial port. The command takes two optional paramet ers: offset: The address offse t parameter allows the file t o be [...]

Management Proce ssor Monitor: Memor y Commands A TCA-9305 User’s Manual 10 009109-01 9-12 cmp The cmp com mand com pare s cou nt objects between addr 1 and addr 2 . Any diff erence s are display ed on t he c onsole display . Definition: cmp [.b, .w, .l] addr1 addr2 count cp The cp comma nd co pies count objects located at the sour ce address to [...]

Management Proce ssor Monitor: Memor y Commands 10009109-01 A TCA-9305 User’s Manual 9-13 00080030: ffff ffff ffff ffff ffff ffff ffff ffff ................ mm The mm comm and modifies mem or y one object at a time. Once star ted, the comm and line prompts f or a new value at the star ting address. After a new value is ent ered, pressing ENTER au[...]

Management Proce ssor Monitor: Fl a sh Comm ands A TCA-9305 User’s Manual 10 009109-01 9-14 00080020: ffffffff ffffffff ffffffff ff ffffff ................ 00080030: ffffffff ffffffff ffffffff ff ffffff ................ 00080040: ffffffff ffffffff ffffffff ff ffffff ................ 00080050: ffffffff ffffffff ffffffff ff ffffff ................ [...]

Management Proce ssor Monitor: EEPR OM/I2C Commands 10009109-01 A TCA-9305 User’s Manual 9-15 Definition: Print information for all fla sh memory ba nks. flinfo Print informa t ion for the fla sh memory in ba nk # N. flinfo N protect The protect command e nables or disable s the flash sector prot ec tion for the specified fla sh sector . Protec t[...]

Management Proce ssor Monitor: EEPR OM/I2C Commands A TCA-9305 User’s Manual 10 009109-01 9-16 reads 100 bytes from offset 0x1800 in serial EEPR OM 0x53 (right-shifted 7- bit address) and places it in me mor y at address 0x100000. Definition: Rea d /w r i te cnt bytes from devadd r EEPROM at offse t off . eeprom read devaddr addr off cnt eeprom w[...]

Management Proce ssor Monitor: IPM C Comm ands 10009109-01 A TCA-9305 User’s Manual 9-17 iprobe The iprobe command probes to discover valid primar y I 2 C bus chip addre sses. Definition: iprobe IPMC COMMANDS IPMI Bas eboar d Manage ment Con troller (BMC) wat chdog is supported and se r vic ed throughout the monitor boot proces s. The BMC watc hd[...]

Management Proce ssor Monitor: IPM C Comm ands A TCA-9305 User’s Manual 10 009109-01 9-18 fru set internal <source addr> <interna l use offset> <count> The fru create comm and loads a default fru image to a blank fru device. fru create <id> default <product name> fru create <id> <address> <size> <[...]

Management Proce ssor Monitor: En vironment P aramete r 10009109-01 A TCA-9305 User’s Manual 9-19 ENVIRONMENT PARAMETE R COMMANDS The monitor uses on-board, non-volatile memo ry for the storage of e nvironment param e- ters. Environme nt parameters are stored as ASCII strings with the f ollowing forma t. < Parameter Name >=< Parameter Va[...]

Management Proce ssor Monitor: Te s t C o m m a n d s A TCA-9305 User’s Manual 10 009109-01 9-20 setenv name value Re moves the en viron men t variable name from the environme nt. setenv name T EST COMMANDS The comm ands described in this s ection per f orm diag nostic and memory tests. diags The diags c ommand ru ns the P owe r-o n Self-t est (P[...]

Management Proce ssor Monitor: Other C ommands 10009109-01 A TCA-9305 User’s Manual 9-21 bdinfo The bdinf o command displa ys the Board Information Struct ure . Definition: bdinfo con info The con info co mman d di spla ys th e i nfor matio n for al l ava ilab le co ns ole devi ces. Definition: coninfo crc32 The crc32 com man d com put es a CRC3 [...]

Management Proce ssor Monitor: Other C ommands A TCA-9305 User’s Manual 10 009109-01 9-22 help The help (or ? ) c ommand displays the online help. Without argume nts, all commands are display ed with a shor t usage message for each. T o obtain more detail ed inform ation for a speci fic comm and, ent er the de sired command a s an argumen t. Defi[...]

Management Proce ssor Monitor: Other C ommands 10009109-01 A TCA-9305 User’s Manual 9-23 moninit[.1, .2] <serial# or “fru”> Initializ e environme nt variables and serial numbe r in NVRAM but do not updat e the monitor in NOR flash. moninit[.1, .2] <serial# or “fru”> nobu rn Initializ e en vironment variables and serial numbe r[...]

Management Proce ssor Monitor: Other C ommands A TCA-9305 User’s Manual 10 009109-01 9-24 phy eTSEC2 w 0x1a 0 ping The ping comm and sends a ping o ver Ethernet t o check if the host can be re ached. The port used is defined by th e ethport env ir on ment va ria bl e. If all is se lected for et hport , the ping process cycles through e ach por t [...]

Management Proce ssor Monitor: Other C ommands 10009109-01 A TCA-9305 User’s Manual 9-25 Definition: showpci sleep The sleep co mmand e xec utes a del ay of N seconds. Definition: Delay ex ecution for N seconds (N is a decimal value). sleep N switch_reg The switch_r eg c ommand re ads or writes to the Etherne t core switch registe r s. The values[...]

Management Proce ssor Monitor: MPC8548 En vironment A TCA-9305 User’s Manual 10 009109-01 9-26 MPC8548 ENVIRONMENT V ARIABLES Press the ‘s ’ key on the k eyboard during reset to f orce the default monitor e nvironment vari- ables t o be loaded during h ardware initia liza tion but be fore diag nostic t esting. T able 9-6: Stand ard Environmen[...]

Management Proce ssor Monitor: MPC8548 En vironment 10009109-01 A TCA-9305 User’s Manual 9-27 The monitor suppor ts optional e nvironmen t variables that e nable additional func tionalit y . The moninit comm a nd (see “moninit” on page 9-22) clears al l en vironment variables and sets the standard en vironment variables to the default values.[...]

Management Proce ssor Monitor: Tr o u b l e s h o o t i n g A TCA-9305 User’s Manual 10 009109-01 9-28 T able 9-7: Optional Environme nt Variable s TR O U B L E S H O O T I N G T o bypa ss the full board initialization sequence, attach a te rminal to the console located on the front of the A TCA-9305. Configure the terminal parame ters to be: 960[...]

Management Proce ssor Monitor: Do wnloa d F orma ts 10009109-01 A TCA-9305 User’s Manual 9-29 Binar y The bi nar y for mats (and associated command s) in clude: • Executable bi nar y files ( go ) •V x W o r k s a n d Q N X ® ELF ( bootm , boot vx , or bootelf ) • Compres sed (gzipped) VxW orks and QNX ELF ( bootm ) • Linux k ernel im age[...]

A TCA-9305 User’s Manual 10 009109-01 9-30 (blank page)[...]

10009109-01 AT CA- 9305 User’s Ma nual 10-1 Section 10 Ac ro ny m s AMC Advanced Mezzanine Card ASC II American Standa rd Code f or Informa tion Interc hange AT C A Advanced T elec om Computing Architecture or AdvancedT C A BMC Baseboar d Manage ment Controlle r CIO Common I/O (RLDRAM) Cmd Command code CPU Cen tral Proc essing Unit CRC C yclic R [...]

Ac ro ny m s: (continued) A TCA-9305 Use r’s Manual 1000910 9-01 10-2 OEM Original Equipment Manufacturer PCI Peri pher al Co mpo nent Interc onn ec t PCIe PCI Ex pres s PHY Physical In ter fac e PLD Programmable Logic Device POST Powe r-on Self T est RLDRAM Reduced Latency Dynamic Random A ccess Me mor y RMA Return Merc handise Authorization SCP[...]

10009109-01 AT CA- 9305 User’s Ma nual i-1 Index A air flow rate . . . . . . . . . . . . . . . . . . . 2-9 B binary download format . . . . . . . . 9-29 block diagram Ethernet switching Interface . . . 6-2 general system . . . . . . . . . . . . . . 1-3 boot commands, monitor . . . . . . . 9-8 boot redirection control diagram . . . . . . . . . . .[...]

Index (c ontinued) A TCA-9305 Use r’s Manual 1000910 9-01 i-2 start-up display . . . . . . . . . . 3-6, 9-2 test commands . . . . . . . . . . . . . 9-20 TFTP bootin g . . . . . . . . . . . . . . . 9-1 troubleshooting . . . . . . . . . . . . 9-28 typographic conventions . . . . . . 9-8 U-Boot . . . . . . . . . . . . . . . . . . . . 9-1 updates . .[...]

Index (c ontinued) 10009109-01 AT CA- 9305 User’s Ma nual i-3 U UL certifications . . . . . . . . . . . . . . . 1-5 W watchdog timer . . . . . . . . . . . . . . 7-12 watchdog, BMC . . . . . . . . . 9-17, 9-26 Z zone 1-3 connectors . . . . . . . . . . . . 8-1[...]

A TCA-9305 Use r’s Manual 1000910 9-01 i-4 (blank page)[...]

10009109-01 AT CA- 9305 User’s Ma nual Not es ____________ _____________ _______________ _____________ _______________ _____________ ___________ ____________ _____________ _______________ _____________ _______________ _____________ ___________ ____________ _____________ _______________ _____________ _______________ _____________ ___________ _____[...]

Emerson Network Pow er Offices: T empe , AZ U.S.A. 1 800 759 1107 or +1 602 438 572 0 Madison, WI U . S.A. 1 800 356 9602 or +1 60 8 831 5500 Shangha i, China +8 610 85631122 Pa ris, Franc e +33 1 60 92 31 20 T ok yo , Japan +81 3 5403 2730 Munich, Ge rmany +49 89 9608 2333 Ho ng Ko ng, China +852 2176 3540 T el Aviv , Israel +972 3 568 4387 www.Em[...]