Emerson CF550BS00 manual

Part No. F40BP74530001 Form No. BP7453-1 ETL Model No.: CF550 READ AND SA VE THESE INSTRUCTIONS 54” Ceiling F an Owner's Manual CF550BS00 CF550ORB00 Model Number L UXE ECO ™ Net W eight: 20.9 Lbs. DATE CODE: The date code of this fan may be found on the box, stamped in ink on a white label. Y ou should record this data above and keep it in[...]

WARNING: To avoid fire, shock, and serious personal injury, follow these instructions. Safety Instructions 1. Read your owner’s manual carefully and keep it for future reference. 2 . Before servicing or cleaning unit, switch power off at service panel and lock service panel disconnecting means to prevent power from being switched on accidentally.[...]

3 Unpac king Instr uctions 1. Check to see that you have received the following parts: NOTE: If you are uncertain of part description, refer to exploded view illustration. a. Fan motor assembly b. Light kit assembly c. One ceiling cover d. One coupler cover e. One glass shade f. One light kit cover plate g. Five fan blades h. One hanger bracket i. [...]

4 Electrical R equir ements If your fan is to replace an existing ceiling light fixture, turn electricity off at the main fuse box at this time and remove the existing light fixture. Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of wit[...]

5 Ho w to Put Y our Ceiling F an T ogether (continued) FAN MOTOR ASSEMBL Y CEILING COVER DOWNROD RUBBER GROMMET COUPLER COVER Figure 3 4. Make sure the rubber grommet is properly installed onto the coupling cover then slide the coupler cover onto the downrod until it rests on top of the motor housing. Place the ceiling cover over the downrod. Be su[...]

6 Ho w to Hang Y our Ceiling F an The fan must be hung with at least 7' of clearance from floor to blades (Figure 6). CEILING FLOOR A T LEAST 7' Figure 6 WARNING ! The outlet box and joist must be securely mounted and capable of supporting at least 50 lbs. Use only a U.L. outlet box listed as “Acceptable for Fan Support of 22.7 kg. (50 [...]

7 ETL Model No.: CF550 Ho w to W ire Y our Ceiling F an If you feel that you do not have enough electrical wiring knowledge or experience, have your fan installed by a licensed electrician. 1. Connect the green grounding lead from the hanger ball and the green grounding lead from the hanger bracket to the grounding conductor of supply (this may be [...]

8 4 Position the light kit assembly onto the fan motor assembly, safely tucking all wires and connectors inside the light kit assembly. 5. Engage the two key slots on the light kit assembly with two loosened screws in motor housing assembly. Rotate the light kit assembly clockwise to engage the two screws into both slots and tighten securely. Insta[...]

9 ETL Model No.: CF550 W all Control Installation (continued) W all Control Pr ocedures SINGLE-POLE INST ALLA TION CAUTION: To reduce the risk of electrical shock, disconnect the electrical supply circuit before installing the fan, light kit or receiver. General Your Emerson Ceiling Fan/Light Control consists of wall mounted transmitter and a recei[...]

10 ETL Model No.: CF550 W all Control Installation (continued) NOTE: Make all wiring connections using wire connectors (supplied). Make sure that all connections are tight, including ground, and that no bare wire is visible at the wire connectors, except for the ground wire. 1. Disconnect electrical power to the branch circuit at the circuit breake[...]

11 ETL Model No.: CF550 W all Control Installation (continued) 6. Screw wall control into wall box using the supplied screws. Leave wall control in “OFF” mode until fan installation is completed. 7. The wall control is supplied with a white, ivory, and almond color switch covers. Choose the finish that best suits your needs and snap the cover o[...]

Using Y our Ceiling F an Fan installation must be completed, including the installation of the fan blades, before testing the remote control. WARNING ! Your wall control has full control of your fan and light. 1. To set the desired fan speed, press the ( ) button to decrease the speed and the ( ) to increase the speed. The LED display will light up[...]

13 ETL Model No.: CF550 T r ouble Shooting WARNING: For your own safety, turn off power at fuse box or circuit breaker before trouble shooting your fan. TROUBLE PROBABLE CAUSE SUGGESTED REMEDY 1. Fan will not start. 1. Fuse or circuit breaker blown. 1. Check main and branch circuit fuses or circuit breakers. 2. Loose power line connections to the f[...]

14 ETL Model No.: CF550 R epair Par ts 1 7 3 2 13 14 6 10 11 18 12 15 16 17 19 20 9 8 5 4[...]

15 ETL Model No.: CF550 R epair Par ts Listing Key Model Number No. Description CF550BS00 CF550ORB00 * Hanger Ball Assembly, 761655-17 761655-32 Consisting of: 1 Hanger Bracket —— 2 Hanger Ball —— 3 Downrod (4.5 ” ) —— * Parts Bag Containing: 764255 764255-1 4 Wire Connector (5) —— 5 Pin, Clevis (1) —— 6 Clip, Hairpin (1) —?[...]

Part No. F40BP74530001 Printed in China 08/12 Form No. BP7453-1 Air Comfort Products DIVISION OF EMERSON ELECTRIC CO. 8100 W. Florissant • St. Louis, MO 63136 ETL Model No.: CF550 Emer son Air Comfor t Ceiling F an Limited W ar r anty What The Limited Warranty Covers: This limited warranty is offered by Air Comfort Products division of Emerson El[...]