Emerson HKTV13 manual

1976, 2001 Sanrio Co., Ltd. c 13” COLOR TV WITH REMOTE CONTROL OWNER’S MANUAL HKTV13 TV/CATV MODE SELECTION When shipped from the factory , the TV/CATV menu option is set to the "CATV"(Cable Television ) mode. If not using CATV, set this menu option to the "Air" position.[...]

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerou[...]

CONTENTS 1 Table of Contents T able of Contents I mportant Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Chapter 1: Overview of Your Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Your TV's Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

2 Important Safeguards IMPORT ANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 2 Save these instructions for later use. 3 Unplug this television equipment from the wall outlet before[...]

3 Important Safeguards 13 An outside antenna system should not be locat- ed in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact w[...]

4 Chapter 1 : Overview of Your Equipment CHAPTER 1 Overview of Y our Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls, and ter- minals that you will use with your TV. Your TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 W W CH V V Use these buttons to change channels on you[...]

Your TV's Back Panel 1 Antenna terminal(ANT) Use this terminal to attach an antenna or cable system to your TV. 2 VIDEO IN JACK This terminal allows the TV to receive a video signal from another component, such as a VCR. 3 AUDIO IN JACK This terminal allows the TV to receive an audio signal from another component, such as a VCR. NOTE VIDEO IN [...]

6 Chapter 1 : Overview of Your Equipment Your Remote Controls 1. POWER Use this button to turn your TV on or off. 2. MUTE Use to turn the TV's sound on and off. 3. V V CH W W Use these buttons to change channels on your TV, or select items in the menu system. 4. C C VOL B B Use these buttons to change your TV's volume, to activate selecti[...]

7 Chapter 1 : Overview of Your Equipment Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. Notes Do not mix different types of batteries, or mix an[...]

Connecting an Antenna or Cable to Y our TV Connecting Rod Antenna (included) Install Rod Antenna on top rear of cabinet and connect other end to the antenna terminal. Your TV will provide you with the best performance if you connect it to an external antenna or cable sys - tem. Follow the directions below make this connection. Please note that you [...]

9 Chapter 2 : Connecting an Antenna or Cable to Your TV Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads , you must obtain a com- biner (available at your[...]

10 Chapter 2 : Connecting an Antenna or Cable to Your TV If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel[...]

Operating Y our TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batter- ies in the remote, you are ready to use the TV. The first thing you should do is program your TV so it memorizes all of available channels. Turning Your TV On 1 To turn your TV on, press the POWER button on the remote control. You ca[...]

Changing Channels You can change channels in three ways: 1 The V CH W buttons will take you through all memorized channels, one by one. The V CH W buttons will not access channels that have not been programmed into the TV's memory. For more information about programming channels into memory, see the section “Programming your TV's Channe[...]

13 Chapter 3 : Operating Your TV Changing the TV's Channel Memory Your TV's memory determines the channels that are available using the V CH W buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it with the V CH W b[...]

Changing the TV's Input Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve connected another component to your TV(such as a VCR) using the Video/Audio input, you will want to be able to view the signal from the component. To do this, you will need to switch from the ‘TV’ input to the ‘ Line ?[...]

15 Chapter 3 : Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing pic- ture. To do so, follow these directions: 1 On "MENU" mode, select "VIDEO" and enter "Video" menu for picture controls. 2 The “Settings” item will be selected[...]

16 Chapter 3 : Operating Your TV Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, fol- low these steps : 1 On "MENU" mode, select "VIDEO" and enter "Video" menu for picture controls. 2 Press the C VOL B buttons to set the “Settings?[...]

17 Chapter 4 : Using Timer Functions Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock 1 On "MENU" mode, select "TIME" and enter "Time" menu. 2 The ?[...]

18 Chapter 4 : Using Timer Functions Setting the Off Time If you enter a time in the “Off time” setting, your TV will automatically turn off at that time. Follow these instructions to set the “Off time”. 1 On "MENU" mode, select "TIME" and enter "Time" menu. 2 Use the V CH W buttons to select “Off time” ite[...]

19 Chapter 4 : Using Timer Functions Setting the Sleep Timer The sleep timer allows you to set an amount of time from 15 minutes to 120 minutes. TV will count down the amount of time you set, then turn itself off. To set the sleep timer: 1 On "MENU" mode, select "TIME" and enter "Time" menu. 2 Use the V CH W buttons to[...]

20 Chapter 5 : Additional Features Additional Features This section contains descriptions of the more advanced features of your TV. Changing the Language of the On-screen Menus You can choose to display the on-screen menus in English, Spanish, French. To change the on-screen language: 1 On"MENU" mode, select "SETUP" and enter &q[...]

21 Chapter 5 : Additional Features CC on Mute You can choose following caption mode with combination of Closed Caption and CC on Mute. 1 Closed Caption is always on whether sound is ON or OFF. Closed Caption : C1 (C2/T1/T2, if available) CC on Mute : off or C1 (C2/T1/T2, if available) 2 Closed Caption is on, only in Mute. Closed Caption : off CC on[...]

22 Chapter 5 : Additional Features Parental Control Settings This item helps parents to set the standard for the programs which their children are going to watch. 1 On "MENU" mode, select "SPECIAL" and enter "Special" menu. 2 Use the V CH W buttons to select “Parental Control” item. 3 Use the C VOL B buttons to ent[...]

23 Chapter 5 : Additional Features Description of Parental Control Settings 1. The TV Guidelines set the standard for TV programs excluding sports and news. Use the V CH W buttons to select, C VOL B buttons to adjust. You can set individual settings with C VOL B buttons. 2. The Movie Ratings set the standard for movie, video, and other media exclud[...]

24 Chapter 6 : Troubleshooting T roubleshooting Your Hello Kitty television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. If the suggestions listed below do not solve your problem, contact your Emerson dealer or an autho-rized Emerson service center. There is no [...]

Cleaning the unit • To prevent fire or shock hazard, disconnect your unit from the AC power source when cleaning • If the cabinet becomes dusty wipe it with a soft dry dust cloth. Do not use any wax or polish sprays on the cabinet. • If the cabinet becomes dirty or smudged with fingerprints it may be cleaned with a soft cloth slightly dampene[...]

26 Warranty EMERSON RADIO CORP. HELLO KITTY – MODEL HKTV13 LIMITED WARRANTY What does this warranty cover? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions. For how long? One year parts and labor from date of original purchase. Two years on picture tube. What will we do? If [...]

Printed in Korea EMERSON RADIO CORP . EMERSON Part No. 21-2021 108-01 800.898.9020[...]