Emerson TG-0807 manual

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 www .daniel.com Daniel ® Liquid T urbine Flow Meter T echnical Guide Liquid T urbine Flow Met ers[...]

[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 T ABLE OF CONTENTS T urbine Meter Parameters ............................................................................................................................. 1 The Daniel Series 1200 and 1500 Liquid T urbine Flow Meter Systems ..................................................[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 1 +0.15% –0.15% +0.02% –0.02% TURBINE METER P ARAMETERS These ve terms are the most widely discussed parameters of turbine meter applications. Linearity is the measure of variation in signal output across the nominal ow range of the meter . The turbine meter will have a nomi[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 2 THE DANIEL ® SERIES 1200 AND 1500 LIQUID TURBINE FLOW METER SYSTEMS The Daniel Series 1200 and 1500 Liquid T urbine Flow Meter Systems combine turbine meters and electronic instrumentation to measure volumetric total ow and/or ow rate. Each Daniel turbine meter comprises of a[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 3 Daniel ® V alves In Load Rack Duty TURBINE METER THEOR Y The basic theory behind Daniel’s electronic liquid turbine meters is relatively simple. Fluid ow through the meter impinges upon the turbine blades which are free to rotate about an axis along the center line of the turb[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 4 P A TENTED* FLOA TING ROT OR Flowing uid enters the turbine through the forward suspension. When it encounters the sharp angle of the cone, the stream is deected outward, increasing in velocity and causing a slight static pressure drop. As the uid leaves the blade area, [...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 5 Surge And Pressure Relief V alves MAGNETIC PICKOFF OF ROTOR VELOCITY The angular velocity of the turbine rotor is taken through the turbine meter wall by means of a magnetic pickoff. The stainless steel meter body is non-magnetic and offers negligible ef fect on a magnetic eld se[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 6 TURBINE METER ROTOR AND BEARING DESIGN The primary differences in turbine meter technology are in the design of the rotor and bearings. The rotor is an assembly of up to twelve (in some designs this number is greater) blades locked into a hub, which rotates on a bearing or bearings.[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 7 RIMMED ROTORS FOR HIGHER RESOLUTION In the larger diameter Daniel Series 1500 Liquid T urbine Flow Meter (normally above 6” in line size), the resolution provided by a blade-type motor may be improved by the use of a rimmed (or shrouded) rotor . This construction is standard for D[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 8 DANIEL ® SERIES 1200 LIQUID TURBINE FLOW METER Daniel Series 1200 Liquid T urbine Flow Meters are designed specically for load rack service where a vital characteristic is repeatability . The meter deploys a lightweight rotor which is supported on self-cleaning ow through bal[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 9 DANIEL ® SERIES 1200 LIQUID TURBINE FLOW METER DESIGN FEA TURES The following data is applicable for Daniel Series 1200 Liquid T urbine Flow Meter calibrated on mineral spirits. Size (Inches) Standard Flow Range Extended Flow Range Standard Flow Range Extended Flow Range Standard F[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 10 DANIEL ® SERIES 1200 LIQUID TURBINE FLOW METER MA TERIALS OF CONSTRUCTION Standard Optional Body/Flanges 1” and 1.5” Stainless Steel NA 2” - 4” Carbon Steel 304 Stainless Steel Suspension Anodized Aluminum None Rotor Blades 400 Series Stainless Steel None Rotor Hub Aluminu[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 1 1 DANIEL ® SERIES 1500 LIQUID TURBINE FLOW METER The Daniel Series 1500 Liquid T urbine Flow Meter is designed for applications requiring rugged dependability with high accuracy and throughput. Used on pipelines, marine loading and other demanding systems, the internals used are we[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 12 The deployment of this high resolution rotor in each of the sizes available gives a nominal K-factor twice that of the standard meter and allows for proving with a smaller size prover . The rimmed design is available as an option on 3”-6” turbines, and is standard on 8” and l[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 13 Item Standard Optional Optional Meter body and anges 304 Standard 1” and 1.5” NA 316 SS CS Standard 2” and up 304 SS 316 SS Suspension 304 SS 304 SS 316 SS Rotor Blades (Rim T ype) 304 SS 304 SS 316 SS Rotor Blades (Blades T ype) 430 SS 430 SS Nickel 200 Sleeve Bearings T [...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 14 RANGEABILITY OF LIQUID TURBINE FLOW METERS The ow ranges indicated in the previous tables show a nominal ow range -- with a turndown of 10:1 - at which the turbine will report measurement repeatable to the indicated specication based on measurement of clean liquids such as[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 15 DANIEL ® SERIES 1500 LIQUID TURBINE FLOW METER SPECIFIC GRA VITY ADJUSTMENTS S.G. = 1 ( .7 to 1 ) Meter Size Minimum Linear Maximum Linear BBL/Hr M 3 /Hr USGPM BBL/Hr M 3 /Hr USGPM 1 10 1.59 7 100 15.90 70 1.5 21.4 3.40 15 214 34 150 2 35.7 5.68 25 357 56.76 250 2.5 57.1 9.08 40 5[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 16 METER PERFORMANCE IN HIGH VISCOSITY LIQUIDS Increases in viscosity of the measured liquid will reduce the rangeability of the ow meter . Generally , the minimum ow rate of the meter will have to be increased to maintain the linearity rating of the meter . The increased ow [...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 17 INST ALLA TION AND OPERA TING RECOMMENDA TIONS For a turbine meter to perform without increased uncertainty and in a repeatable and accurate manner , the owing stream must be free of rotational components. The internal assembly supports of a turbine meter of fer a slight straigh[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 18 Figure 14 - Effects of Back Pressure In some circumstances, the use of a Flow Conditioning Plate (FCP) is possible. The ow conditioning plate is available from 3” to 6” for the Daniel Series 1500 Liquid T urbine Flow Meter , and is standard on the Daniel Series 1200 Liquid T[...]

T echnical Guide DAN-LIQ-T urbine Meter-TG-0807 August 2007 Page 19 DUAL CHANNEL PREAMP TERMINAL IDENTIFICA TION CUSTOMER CONNECTIONS BLACK OR RED PICKOFF PICKOFF WHITE WHITE CHANNEL B CHANNEL A BLACK OR RED T U P T U O B . A H C T U P T U O A . A H C C D V 0 3 O T 0 1 + N O M M O C N O M M O C TB1 1 2 3 4 5 2 1 2 1 TB2 TB3 J3 J4 J2 JUMPER POSITION[...]

[...]

Emerson Process Management Daniel Measurement and Control, Inc. World Area Headquarters Houston, T exas, USA T : 713 -46 7-6 00 0, F : 71 3-8 27- 38 80 US A T oll Fre e 1- 888 -F LOW -0 01 ww w .d an iel .co m Calgary , Alberta, Canada T : 403 -27 9-1 87 9, F : 40 3-2 36- 13 37 Al ber ta T o ll F ree 1-8 00- 24 2-3 197 Sa les @Da ni eli nd- ca n.c [...]