Encore electronic ENUTV-2 manual

Personal V ideo Recorder ENUTV -2 (USB TV Capture Box) ENUTV -2 Series User ’ s Guide[...]

ENUTV -2 User ’ s Guide - User ’ s Notice No part of this manual, including the produc ts and software described in it, may be reproduced, transmitted, transcribed, st ored in a retrieval system , or translated into any language in any form or by any means, except documenta tion kept by the purchaser for backup purposes, without the express wri[...]

ENUTV -2 User ’s Guide - Chapter 1: Introduction …………………………………………………………………………….4 1.1 Package Contents ................................................................................................................. 4 1.2 System Requirements ................................................[...]

ENUTV -2 User ’s Guide - Chapter 1: Introduction 1.1 Package Contents Upon receiving your ENUTV -2, please make sure the following items are included in the  package. •  ENUTV - 2 • Driver CD • Remote Control • USB Cable • Quick Guide 1.2 System Requirements •  IBM PC or compatible •  P4 1.6 (for Preview); P4 2.4 or abov[...]

ENUTV -2 User ’s Guide - Chapter 2: Getting S t arted 2.1 Connect USB ENUTV-2 T o install the ENUTV -2 into your computer , follow the steps below: 1. Connect the antenna cable to the “TV” connector . 2. Connect the Device to PC USB Hub. 2.2 Device Driver Installation 1. Once you connect ENUTV -2 to the USB port, you can just follow the syste[...]

ENUTV -2 User ’s Guide - 4. Click “Next” button. 5. Click “Install” button. 6. Click “Next” button. 7. W ait Installation Wizard copying necessary driver files onto your system. 6[...]

ENUTV -2 User ’s Guide - 8. Click “Continue Anyway” button. 9. Click “Finish” button. 10. Click “Finish” button again to complete installation. 2.3 Install the DirectX® Microsoft Di rectX® allows 3D hardware acceleration support in Windows® 98, 2000, Windows® XP . For sof tware MPEG support in Windows 98, you must first install Mi[...]

ENUTV -2 User ’s Guide - 1. Insert the installation CD into the CD-ROM drive. The setup screen will automatically appear . 2. Click the “DirectX” button. 3. Click “Accept the agr eement” radio button then click “ Next” 4. Click “ Next ” to confirm the installation of DirectX 5. Click “Finish” NOTE: The computer will automatica[...]

ENUTV -2 User ’s Guide - 2.4 Install the ENUTV-2 Utility Software. 1. Click “Setup Utility” to begin installing T V application. 2. Click “Next” button to start installing. 3. Please read the License Agreement and click “Next” to begin copying files. 9[...]

ENUTV -2 User ’s Guide - 4. Click “Next” or choose setup folder for installation. 5. Then click “Finish” to complete the installation of ENUTV -2. 6. Select the “Y es, I want to restart my computer now” and click the “OK” to restart your computer . 10[...]

ENUTV -2 User ’s Guide - Chapter 3: Launch the ENUTV -2 Program 3.1 Running the ENUTV-2 for the first time Click “S tart” , move your mouse to “ProgramsENUTV -2ENUT V -2” then click ENUTV - 2 NOTE: When the ENUTV -2 Program is first st art ed, it w ill prompt you to select your country and language: 1. Select the video signal format in [...]

ENUTV -2 User ’s Guide - 3. This step will give you an option to scan for TV channels. Select which signal source you are connected to in the “TV Scan T ype” line then click “Search” . There are two types of scans. 1. One is scan by TV channel t able “Cable”, “Antenna” and “Extend ” 2. One is scan by frequency that scans low f[...]

ENUTV -2 User ’s Guide - When you do a full screen display , you can us e the panel bar to set up your TV b ox. 1. Fix Panel: T o fix the display panel. Show / Hide as mouse drags. 2. Hide Panel: T o hide the sub-panel. 3. Snapshot: Same as "Sna pshot" button of main panel. 4. TV W all: T o launch TV W all function, same as " TV Wa[...]

ENUTV -2 User ’s Guide - 3.4 Snapshot Image Click the “Snapshot” button to captu re still image. Click the “Setting” button to setup the image form at. ENUTV -2 supports BMP and JPEG image format. Please choose your desired format. -2 3.5 Playback Video Click the “Playback” button to Play the recording Video. Click “Play List” but[...]

ENUTV -2 User ’s Guide - Exit ： T o exit the vid eo playback window , press [Esc] or [AL T]+[F4] on keyboard Minimize ： T o minimize the video playback window , click "Mov iePlayer" in desktop taskbar to restore di splay Hide Control Panel ： T o hide video control panel, right click video window a nd select "Control Panel&quo[...]

ENUTV -2 User ’s Guide - 3.6 Browse Image Click the “Browse Image” to retrieve the saved pictures. Y ou can use the “Browse Image” soft ware to control picture zoom in/out, or rename. The top toolbar contain s many functi on buttons for you to easily operate: -2 Refresh ： T o renew display snapshot image in current folder . Path Panel ?[...]

ENUTV -2 User ’s Guide - Chapter 4: Using the Remote Control The Remote control allows you to operate t he ENUTV -2 program, such as turning the TV on or off, changing channel and volume, etc. Aim the upper front side of the Remote Control to the Remote Control Receiver as y ou would do on other infrared remote control. For default button assignm[...]

ENUTV -2 User ’s Guide - Chapter 5: T echnical Support: For T echnical Support or Inst allation Hotlin e contact s please visit our web site at www .encore-usa.com 18[...]

ENUTV -2 User ’s Guide - NOTES: ________________________ ____________________________________ ___________ ________________________ ____________________________________ ___________ ________________________ ____________________________________ ___________ ________________________ ____________________________________ ___________ ____________________[...]

ENUTV -2 User ’s Guide - NOTES: ________________________ ____________________________________ ___________ ________________________ ____________________________________ ___________ ____________________________________________________________ ___________ ________________________ ____________________________________ ___________ _____________________[...]

2007/7/20 V ersion: 0.9[...]