EverFocus EDSR400M manual

EDSR400M INSTRUCTION MANUAL Mobile Digital 4-Ch annel Video Recorder About this manual Before installing and using this unit, please read this Man ual carefu lly. Be sure to keep it handy for l ater reference. V1.0[...]

WARNING TO REDUCE RISK OF FI RE OR ELE CTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE . CAUTION DO NOT REMOVE COVER. NO USER SE RVICEABLE PARTS IN SIDE. REFER SER V ICING TO QUALIFIED SER VICE PERSONNEL. Note: This equipmen t has been tested and found to co mply with the limits for a Clas s A digi tal device, The changes or mod ifica[...]

 Refer all work related to th e installation of this product to qualified service personnel or system installers.  Do not block the ventilation opening or slots on the cover.  Do not drop metal l ic parts through sl ots.This coul d permanent l y damage the appliance. Turn the power off i mmediately and contact qualified service personnel f[...]

The exclamation point within an equila teral triangle is intended to alert the user to presence of important operating and maintenance(servicing)instructions in the literature accompanying the applianc e. Warning : To prevent fire or shock ha zard, do not expose units not specifically designed for others use to rain or moisture. Safety Precautions [...]

Important Safeguards Read Instruction ---All the safety and operating instructions s hould be read before the init is operated Retain Instructions ---The safety and operating instructions should be retained for future reference. Heed Warnings —All warnings on the unit and in the opera ting instructions should be adhered to. Follow Instructions ?[...]

Important Safeguards and Warnings before Installation For Mobile Dig ital Single Channe l Video Recorder (single HDD) While the DVR is connected to th e 12VDC battery of the vehicle, the limited electric cu rrent is 3 .0 amps with a normal electric current between 1.5~1.0 amps. While the DVR is connected to th e 24VDC battery of the vehicle, the li[...]

Support Suspend Interfa ce Interfa ce The DVR can be mou nted horizontal ly (suspen d or supp ort mounted). Support Suspend Show all t he possible ways to mount the DVR . Use the two Z-brack ets supplied to mount it in any ways shown. Quick Install Guide EDSR400M EDSR400M EDSR400M EDSR400M[...]

Quick Install Guide Quick Install Guide : 1.Unpack Ev erything Make sure you have everythi ng you need before you begi n the install ation. 2.Equipment Required The following tools may help you to co mplete the installation: •Drill •Screwdrivers •Wire cutters 3. Choosing the Location Choose a location fo r installation that: •Provide conven[...]

Driv e seat ( between seat and wall) Truck ( Suggest user “ suspend” for mounting option ) Glove box ( inside or underneath) Passenger sea t (underneath) Possible Installation Locations Inside th e Automobile Vehicle: TOYOTA CAMRY Generator + - - + Vehicle batter y (+12V or +24V) DVR Fuse(5 A or 10A) Key star t Spilt filter + - Car body On/Off [...]

Truck Driv e seat ( between seat and wall) or Passenge r seat (underneath) ( Suggest u ser use “ support” for mounting option) Glove box ( inside or underneath) Generator + - - + Vehicle batter y (+24V) DVR Fuse(5A) Key star t Spilt filter + - Car body On/Off swit ch Vehicle body Show the wiri ng on the wiri ng harness that connects to the elec[...]

Connect the Camera(s) Connect the power connector from the camera(s) harness into the CAMERA POWER OUT jack on the back panel of the DVR. Connect the primary camera (s) video connector to the CAMERA INPU T and the audio connector to the AUDIO INPUT In the back panel. Adjust the camera(s). After the camera is installed, conn ect a monitor dir ectly [...]

Quick Install Guide Installing the Hard Drive As following are the figure for the 3.5” and 2.5” HDD. Figure show s 3.5“ HDD Figure show s 2.5“ HDD[...]

Table of Contents 1. Product Overview……….….. .……………………………………………………………………… 1 1.1 Feature ………...…………….….…………………………………….…………..……………….…… 1 1.2 Specifications…………….…...………….………………….……?[...]

10. Interface Specifications…….. ………...………………………………………………………44 10.1 Transmission setting……..……………………………..………………………….…………………………………..44 10.2 Remote Control Protocol…………………………………..…………………?[...]

1. Product Overview 1.1 Features Product Overview and Features  Easy-to-use control pa nel with common VCR  Shuttle/Jog dial for picture-by-p icture or fast/slow viewing  No tapes to ma nage , clean or replace  Instant retrieval of stored video  On-screen setup menu and system timer  Ethernet TCP/IP connectivity for remote viewing[...]

Specifications 2 4 camera inputs (B NC),1Vp-p/ 75ohm Video Input M-JPEG Video Compression 0 ℃ ~+50 ℃ Operating Temperature 320.8m m (L) x 215m m (W) x 109. 9mm (H) Dimension RJ45 C onnector RS485 9-pin female connector RS-232 Yes Watch Dog Ti mer Built-in real time clock Timer Front Panel Keypad User Input Device Menu Driven User Interface On s[...]

20 10 9 12 11 13 14 16 21 19 18 17 Front Panel Keypads CH1 ~CH4: . 1 4 3 2. Front Panel Keypads 15 22 2 1 4 3 5 6 8 7 Press channel key (1~4) t o display vi deo image in the full screen format , the picture of the corresponding will fill the whole scre en of the monitor display. ~ SEQ : Press this key to enter the auto sequential switch ing mode. 7[...]

Display: Press this key to switch ON/OFF. 16 Display OFF Display Date/Time and titles Shuttle and J og Dial Shuttle : In Playback mode, turn t he shuttle di al can fast forward/rewind the pi cture. In Pause mode, t urn the shuttl e dial can slow forward/rewind the picture. Jog Dial : 19 In Pause mode, tur n the jog di al can forward/rewind the Pict[...]

VIDEO IN (1~4): The BNC connectors of video input en ables the sy stem to receive the signals from each camera through the 75 ohm coaxial cab les. VIDEO IN / Output VIDEO OUT(1~4) : Connect t he other devices with four cam eras to the other devices. MAIN MONITOR : T his connector is used for t he Main monit or display, A n umber of different displa[...]

Back Panel Connections Audio IN : Audio in put for recording. Audio OUT : Audio ou tput can b e set to “ON” or “OFF” in Setup Menu. When in recording or standby mode, the out of SW1 is connected to Audio IN. Playback Audio When in playback mode the out of SW1 is connected to SW2 Audio. When Playback Audio is enabled then the output of SW2 w[...]

LAN Connector : The RJ-45 LAN connector. LAN 7 RS232 RS232 connector : Connect D-Sub 9 pins connector to RS232 p orts for remote control 8 Back Panel Connections 7 RS485 RS485 connector : RJ 45 Connector to Cascade multi Digital Video Reco rd er. 9 10 FAN: Cooli n g FA N.[...]

CALL Monitor System Connection 8 4. System Connection The installa tions described below should be made by qualified ser vice personnel or sy stem insta llers. 4.1 Before Installation Please refer to the following diagra m for the system conne ctions. Camera 1~4 Audio Outp ut Speaker Main Monitor Ethernet RS232 Alarm In /Out Note: Mon itor and Came[...]

System Connection 9 Speaker Connect the speaker or ot her audio devices. Ethernet Digital Video Recorder is enabled co ntrol form the PC via Ethernet. Connect the L AN connect or to a standard RJ45 connector Ethernet cable. RS232/RS485 Digital Vi deo Recorder is enabled cont rol from the P C via RS 232/RS 485 Main/Call Monitor Connect the Main/Call[...]

INSTALLATION 10 (1) Insert a HDD (ID E) for Video Storage (2) Connect cable for vi deo/audi o inp ut and video/au dio out, The detail connection is described in SYSTEM CONNE CTION . (3) Switch Power On The POWER LED lights if power is normal . (4) Press MENU key to enter SET UP MEN U. Once inside the main men u you will find there are 13 set up pag[...]

MENU 6. MENU FLOW DAYLIG HT SA V I NG SETTING MENU ( See page 15 ) TITLE SETTING MENU ( See page 14 ) CLOCK/L ANGUAGE SETTING MENU ( See page 13 ) Turn the Jog di al clockwise or counterclockwise to change setting menu page. 11 : 2003/07/04 F RI : 13:01:02 CLOCK/ LANGUAGE SETTING MENU DATE TIME MENU LA NGUAGE VIDEO SYSTEM : ENGLISH : NTSC TITLE SET[...]

ON NO NO NO NO 123456 SYSTEM SETTING MENU ( See page 31 ) SYSTEM SETTING MENU : : : : : : PLAY WIT H AUDIO DISK RENEW SYSTEM UPDATE LOAD DE FAULT PASSWORD IN ABLE PASSWORD MOTION RECORD SETTING MENU MOTION RECORD SETTING MENU ( See page 29 ) RECORDI NG SPEE D RECORDING QUALITY CH OP SEN 1 OFF STANDARD 2 OFF STANDARD 3 OFF STANDARD 4 OFF STANDARD : [...]

MENU 13 In CLO CK/LANGUAGE SETTING MENU , we define: (1) DATE : Current d ate Year: 2000 ~ 2099 Month: 01~ 12 Date: 01~31 Week: Sunday~Saturday (2) TIME : Current t ime Hour: 00 ~ 23 Minute : 00 ~ 59 Second: 00 ~ 59 (3) MENU LANG UAGE: ENGLISH (4) VIDEO SYST EM : Factory default settin g dep end on machine “NTSC” or “PAL” . (5) VERSI ON: Cu[...]

MENU 14 6.2 TITLE SETTING MENU TITLE SETTING MENU CH1:_ _ _ _ _ _ _ _ _ _ _ _ CH2:_ _ _ _ _ _ _ _ _ _ _ _ CH3:_ _ _ _ _ _ _ _ _ _ _ _ CH4:_ _ _ _ _ _ _ _ _ _ _ _ In TITLE SE TTING MENU , we define: The title setting menu allows you t o assign a title to each camera input. Titling with up to 9 characte rs is supported in each ch annel. The available[...]

MENU 15 6.3 DAYLIGHT SETTING MENU DAYLIGHT SETTI NG MENU DAYLIGHT SA VIN G : OF F START TIME: FIRST SUN IN MARCH CHANGE FROM 03:00 TO 04:00 STOP TIME: FIRST SUN IN MARCH CHANGE FROM 04 :00 TO 03:00 In DAYLIG HT SETT ING MENU , we define: (1) DAYLIGHT SAVING: Select “ON” or “OFF” while the dayli ght saving t ime function i s enabled or not. [...]

(3) STOP TIME: : Press or to move the cursor to the left or right. : Press or to change the value. “ FIRST ” Use the arrows to set the present week FIRST SECOND THIRD FOURTH “ SUN ”Use the arrow to set the pres en t date Thursday Sunday Friday Tuesday Monday Wednesday Sa turday “ IN MARCH ”Use the arrow to set the present month Sunday F[...]

MENU 6.4 TIMER SETTING MENU TIMER SETTING MENU WEEK START STO P SPEE D QUALITY SE T SUN 00:00 23:59 60 IPS STANDARD OFF SUN 00:00 23:59 60 IPS STANDARD OFF SUN 00:00 23:59 60 IPS STANDARD OFF SUN 00:00 23:59 60 IPS STANDARD OFF SUN 00:00 23:59 60 IPS STANDARD OFF SUN 00:00 23:59 60 IPS STANDARD OFF SUN 00:00 23:59 60 IPS STANDARD OFF SUN 00:00 23:5[...]

MENU 18 NORMAL RECORD SETTING MENU SPEED QUALITY DISK FULL 60 IPS STANDARD REWITE : : : In NORMAL RECORDING ME NU, we define (1) SPEED : Recording Speed The entry allows user to set the no r mal recording spee d . (2) QUALIT Y: Video recording quality setup , this item lets you set the quality of the video picture by selectin g a compression rate. [...]

In ALARM RECORDING MENU, we def ine (1) ALARM OPERAT ION : ON : Records when alarm occurs. OFF : Do not record wh en alar m occurs. (2) RECORDING SPEED : The recording speed in alarm duration. (3) RECORDING QUALI T Y : Select the Recording picture q u ality when alarm occurs. MENU 19 ALARM RECORD SETTI NG MENU ALARM OPERATI ON RECORDING SP E ED REC[...]

MENU Note: Alarm Connectors (DB-15) PIN # NAME PIN # NAME 1 GND 9 GPIN 2 2 ALMIN 1 10 DISK-FULL 3 ALMIN 2 11 GPOUT 1 4 ALMIN 3 12 GPOUT 2 5 ALMIN 4 13 ALM NC 6 ALMRST 14 ALM NO 7 REC IN 15 ALM COM 8 GND The alarm connector, fi gure 1, is used to provide one sensor alarm input for each c amera input. For easy operation, an alarm extension board, fig[...]

MENU (a.) Alarm out To external equipment 8 2 1 9 COIL RELAY There ar e two ways to do the alarm out connection: Normally Closed Connect io n (use pin # 13 and # 12) To external equipment 8 2 1 15 9 COIL RELAY 8 2 1 15 9 COIL RELAY To external equipment Normally open connection (use pin # 13 an d # 14) 21[...]

MENU Alarm in There are four alarm i nputs. Please connect th e alarm input in the sa me sequence as the cameras input BNC. When any alarm signal comes in, the Digita l Video Recorder will do the following: 1. Display Alarm Message 2. Turn on the buzzer if the buzzer setting is on. The ALARM in can be selected as nor mally open input or nor mally c[...]

(7) ALARM - RES ET TYPE: N.O. : Normal Open N.C. : Normal Close (8) ALARM DURATIO N TIME : When any sensor alarm connected to the device is activated, the device will immediately rea ct an alar m and display the warning messag e. This entry is used to set th e alar m duration from 1second t o 99 second. (9) PRE-ALARM OPERA TION : ON : Record the pi[...]

BUZZER SE TTING MENU BUZZER ALARM –IN RECORD -I N DISK FUL L VIDEO LOSS TIMER In BUZZER SETTING M E NU, we S ET the buz z er O N/OFF under th e follo wing co ndi tions: (1) BUZZ ER : ENABLE: Select buzzer to be on.. DISABLE: Select buzzer to be off. (2) ALARM –IN : ON, the buzzer will sound when the alarm occurs. (3) RECORD – IN: ON, the buzz[...]

MENU ARCHIVE S ETTING M ENU PICTURE SIZE TIME STAMP TIME STAMP POS WATER MARK WATER MARK P OS 720x480 ON TOP ON TOP : : : : : 6.8 ARC HIVE SETTING M ENU (1) PICTURE SIZE : Selects picture size for copying image to CF card Big size:720x480/720x576 for NTSC/PAL Small size:352x240/352x2 88 for NTSC/PAL (2) TIME ST AMP : ON : The time stamp will show o[...]

6.9 NETWORK SETTING MENU NETWORK SETTING M ENU IP ADDRESS NET MASK ADDRESS GATEWAY ADDRES S USER-NAME PASSW ORD L EVEL 192.168.010.00 5 255.255.255.00 0 192.168.010.00 1 : : : GUEST GUEST GUES T GENERAL GENERAL GE NERAL ADMIN ADMIN SUPER (1) IP ADDRESS : Assign an I P address for this u nit, for exam ple:192.168.01 0.005 (2) NET MASK ADDRESS: Assi [...]

MENU (1) MAIN MONIT OR : DWELL TIME : The main Dwell Time determines the rate at which the sequences camer as on the main monitor. The dwelling time for the auto sequence r can be set betwe en ( 0-99) seconds. SEQ WITH QUAD: ON: The quad screen d isplay is under the auto sequ ential switching mode. OFF:T he quad screen display is not under the auto[...]

MENU (1) RS232 BA UD RATE: There ar e 6 different speeds that can be used to transmit instruction or informati on through the R S232 port on the device, 120 0 baud,2400 baud,4800 baud,9 600 baud, 19200 baud,and 3840 baud. The def ault setting fro m the fa ctory is 9600 baud . (2) RS232 ST OP BI T: Select stop bit: 1 or 2 (3) RS232 PARITY: Select pa[...]

MENU (1) RECORDING SPEED: Select MOTION RECORDING S PEEED (2) RECORDING QUALITY: Select the Motion recording pictu r e quality when motion occurs. 29 MOTION RE CORD SETT ING MENU 6.12 MOTION RECORD SETTING MENU RECORDING SP E ED RECORDING QUALITY CH OP SEN In the MOTION RECORD SETTING MENU, we define : 60 IPS : STANDARD 1 OFF S TANDARD 2 OFF S TAND[...]

(5) SEN:(SENS IT IVITY) This entry allows user to set the Motion recording pictur e’s q uality for each ca mera when motion o ccu rs. There ar e four different sensitivity that can be u sed to set the picture’s quality, High, Standard, Basic, and Low. The default setting is “STANDARD”. : Press or to move the cursor to the left or right. : P[...]

MENU (1) PLAY WITH AUDIO: ON/OFF: Play back with or without audio. (2) DISK RE NEW: 31 SYSTEM SETTING M ENU 6.13 SYSTEM SETTING MENU In the SYSTE M SETTING MENU, we define PLAY WITH AUDIO DISK RENEW SYSTEM UP DATE LOAD DEFAULT PASSWORD I NABLE PASSWOR D : ON : NO : NO : NO : NO : 123456 (3) SYSTEM UPDAT E : YES/NO : Updates the system. YES : Copy t[...]

(4) LOAD DEFAULT : YES/NO : Load the Load System. YES : The double check dialog will appear on the screen . MENU 32 (5) PASSWORD INA BLE: Password is used to prevent unauthori zed personnel to change any setup of the device. Set “ NO” to release password function, set “ YES” to enable password function. (6) PASSWO RD: With up t o 6 characte[...]

7.1 INSTANT RECORDING When pressed, the pictures being m onitored will be recorded in the HDD. •The recording rate an d recording quality ar e set in the Record Set menu • “ RECORD ” appears in the operating display Video out Press Stop key to stop recording. • Stop key can be activated only in recordi ng mode. •When the HDD is full, th[...]

Press MENU key and turn the jog d ial to select the ALARM RECORDING SE TTING MENU. Instant recording and time r recording will stop when an alarm occurs. RECORDING OPE RATION: ON: Enables alarm recording, OFF :Disables alarm recording. RECORDING SP E ED: Set the recording speed when alarm occurs. RECORDING QUA L I T Y: In alarm duration, the record[...]

ALARM – RESE T TYPE: Select the type of alar m-reset inpu t to be Normal Close (N. C.) or Normal Open (N.O.) ALARM DURATION T IME: Alarm duratio n from 01 second s to 90 seconds. PRE-ALARM OPERATI ON: ON: Enables pre-alar m re cording, OFF: Disables pre-alarm recording. RECORDING SP E ED: Set the recoding speed in pre-alarm duration. Notice: The [...]

8.1 NORMAL PLAYBACK Press the PLAY key to start playing back the stored im age/audio from the last SEGMENT. (1) Playback Press the REV.PLAY key to start reverse playi ng back the stored image/audio from the last segment. Press the STOP key to stop play ing back. (3) Fast Forward/Reverse Playback Press the PLAY key to start playing back. Turn the sh[...]

Playing Back 37 (4) Slow Forward/Reverse Playback During P layback,press PAUSE key to freeze the play ing back pict ure. Turn the shut tle clockwise and slow forward playback starts. The speed will show on the SCREEN at t he corner of the screen. >> 1/2, 1/4, 1/ 6, 1/ 8, 1/10, 1/ 16 , 1/ 3 2 Turn the shut tle counterclockwise and slow reverse[...]

8.2 SEARCH PLAYBACK (1) Segment Search Playback Press the SEARCH key to enter the Search menu. SEARCH MENU BY SEGMENT LIST BY ALARM LIST BY DATA TIME Press the keys to move the cursor to BY SEGMENT LIST and press ENTER key to select file search. SEGMENT SEARCH 0001 0002 0003 Playing Back SEARCH Press the keys to move the cursor to the segment you w[...]

Playing Back (2) Alarm Search Playback Press SEARC H key to enter the Search menu. Press the keys to move the cursor to BY ALARM LIST and press ENTER key to select alarm search. ALARM SEARCH 1 2 3 Press the keys to move th e cursor to select the alarm image to be played back. When the selec tion list is full, turn the jog dial clockwise to select n[...]

Playing Back (3) Date/Time Search Playback Press SEARC H key to enter the Search menu. Press the keys t o move the cursor t o BY DATE/TIME and press ENTER key to select file search. DATE/TIME SEARCH YEAR/MM/DD HH:MM:SS 2005 01 01 21 33 26 S EARCH SEARCH Notice: If there is no image stored in the da te/time specified then the machine will start play[...]

COPY Press COPY key and then the copy menu appears. The full screen will show u p from Quad di splay. COPY 42 Press the PLAY key to start playi ng back. PLAY 9.2 C OPY TO MOVIE FILE CH4 COPY TO MOVI E FILE PRESS CH1 ~C H4 TO CHOOSE USE JPG TO S ELECT PIC T URE PRESS COPY TO START CO PY PRESS PAUSE T O STOP COPY PRESS SEARC H TO CLOSE FILE PRESS STO[...]

COPY Insert a Compact Flash card into the Compact Flash slot on the front panel. When inserting the Compact Fl ash card, make sure that the direction of insertion is correct. Turn the jog dial clockwise to choose your desired image. PAUSE Press the PLAY key to start pla ying bac k. Press th e PAUSE key to pause playback. COPY While displayed as you[...]

COPY 43 PAUSE STOP Notice: Copied images are stored as a movie picture. Copied files are saved as .MOV file. Use QuickTime to play the retrieve d .MOV files. You ma y download QuickTim e at www.apple.com . The playback version for QuickTime is free. SEARCH Press “PAUSE” button once to stop copy image. Press “SEARCH” button once to close fil[...]

Interface Specifications RS232 10.1 Transmi s sion setting The pin assi gnment of the 9-pin D-SUB connector PIN # NAME PIN # NAME 1 NOT CONNECTED 1 NOT CONNECTED 2 TXD 2 RXD 3 RXD 3 TXD 4 NOT CONNECTED 4 NOT CONNECTED 5 GROUND 5 GROUND 6 NOT CONNECTED 6 NOT CONNECTED 7 NOT CONNECTED 7 NOT CONNECTED 8 NOT CONNECTED 8 NOT CONNECTED 9 NOT CONNECTED 9 [...]

10.2 Remote Control Protocol A computer or a term inal can be used to contro l the unit by sending the packet as following. Interface Specifications 45 ========================== ======================== ======= Digital video recorder RS 48 5/232 Contr ol C o de Prot ocol ========================== ======================== ======= 1-1. Sam ple cont[...]

2-1. The format of m essage packet is as foll ows: Length Byte (Prefix: 0x86 , 0x87, or 0x 88 ..... ) Receiver ID high by te Receiver ID low byte Opcode Byte Data Byte1 Data Byte2 Data Byte3 . . Checksum Byte 2-2. Length B yte This Length Byte is also a prefix. Bit 7 must be 1. EX: 0x87 ==> this packets has 7 bytes length. ( not included Length [...]

2-3. Receiver ID 1). Indivi dual receiver ID ------------------ ----------------- ------------------ ---------------- Decimal 14bit bi nary value Hbyte byte Receiver ID (Digital Video Recorder) ------- ------------------ - ------ ------ ---------------- ------ 0 0000000 0000000 00 00 ID = 0 1 0000000 0000001 00 01 ID = 1 2 0000000 0000010 00 02 ID [...]

2-4-1. A remot e key pressed (OPcode=0x4B) ------------------ --------------- Data1 Key ------ ----------------- -------- 0x00 k ey 'CH1' 0x01 k ey 'CH2' 0x02 k ey 'CH3' 0x03 k ey 'CH4' 0x04 k ey 'MODE' 0x05 k ey 'ZOOM' 0x06 k e y 'SEQ ' 0x07 k ey 'MENU' 0x08 k ey &apos[...]

Remote Controller The remote controller is an accessory to enhance the handy operatio ns of digit al video recorder (Figu re 1). You can do all the set tings and operat ions by the remote controller. The effective distance is up to 10 meters without any obstacles. The keypad functions are as same as the front panel of the digital video recorder . F[...]

Appendix-A 12.1 When Recording with an 80-GB HDD 50 Lower Low Basic Standard High Superio r : 15 kB : 19 kB : 23 kB : 27 kB : 31 kB : 35 kB (Estimated with typical image-l ow noise level) 12. APPENDIX- A/Time Lapse Mode Recording Time Reference :24H=1 day.168 H=1 week , 720H=1 month ,8760H=1 y ear NT S C system st orage( GB): 80 Recording Spe ed LO[...]

12.2 When Recording with a 160-GB HDD Lower Low Basic Standard High Superio r : 15 kB : 19 kB : 23 kB : 27 kB : 31 kB : 35 kB Appendix-A 51 (Estimated with typical image-l ow noise level) Reference :24H=1 day.168 H=1 week , 720H=1 month ,8760H=1 y ear NT SC syst em st orage(G B): 160 Reco rdi ng Spe ed LO W ER LO W BA SI C STA NDA RD HI G H SUPE RI[...]

13. View From Internet/Intranet Basic Operations and Login Display: Go to the Internet Explorer, key in the network I P address, for example, http:/ /192.168 .10.5 (must be the same IP address as the one assigned t o the unit from the Network Setting Menu.) The “ digital video recorder login ” page will show on the screen” User’ must ent er[...]

Main Screen Above diagram is the main screen display. The icons on t he lower corner of th e screen are mainly for control and Configurati on, those on t he right corner are for status indication. If any icon is grayed, it means th at the specific func tio n is not accessible in the current mode. The followings are a brief descri ption for each of [...]

Note: Control Mode which onl y allow use with access level “Super” user. . C Control for Playback Video S peed Control for Playback Positio n 8 9 54[...]

55 Appendix-C 10 The syste m allows up to 3 wa ys playback video, by SEGMEN T,ALARM L IST and DATE T IME. (playbac k by segm e nt list) (playba ck by al arm list) (playback by Date time)[...]

11 12 13 All available seg ments are sh own in the list. Click to select and highlight. Click to playback selected video segment . Current connection and pl ayback status is show n along with date and time. 56 Appendix-C 14 Full screen view. 15 16 17 18 Quad screen view Nine split screen view Sixteen split screen view A pop-up m enu to select camer[...]

LAN Functional Specification Specifications: Network Interface: 10Mbits/ s Ethernet (10Base T) LAN controller Chi p: RealTek 8019 LAN Connector: RJ-45 Protocol: HTTP ,TCP/IP.ICM P,ARP Remote Access: Standard browser such as internet Explorer/Netscape with JAVA support. Image Compress: J PEG 57[...]

EverFocus Electronics Corp. Head Office: 12F, No.79 Sec. 1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan TEL : 886-2-26982334 FAX : 886-2-26982380 USA Office: 2445 Huntington Drive, San Marino, CA 91108, U.S.A. TEL : 1-626-844-8888 FAX : 1-626-844-8838 Japan Office: 1809 WBG Marive East 18F, 2-6 Nakase.Mihama-ku. Chiba city 261-7118, Japan TEL : 81-43-[...]