Excalibur electronic AL-1000ATV2 manual

"WE'VE GOT THE EDGE ON SECURITY" COPYRIGHT: OMEGA RESEARCH & DEVELOPMENT INC. 1999 OWNER'S MANUAL One or more of these patents may apply to this product: #5,612,578 #5,612,699 #5,654,688 #5,663,704 #382,558 #385,878 #5,719,551 #5,729,191 #5,739,748 #5,750,942 #5,818,329 #5,739,747 AL-1000ATV2 AL-900ATV2 Table Of Contents Int[...]

transmitter to operate your system for the purpose of stealing your vehicle or its contents. Additionally, in normal operation, every time the ignition switch is turned "on", the LED Status Indicator will flash and pause for ten seconds, the number of flashes between each pause being equal to the number of transmitters encoded to operate [...]

Additionally, Automatic Last Door Arming may entitle you to an insurance discount. Please note that the previously mentioned Arming By-Pass feature does not operate with the Automatic Last Door Arming feature. The bypass feature is designed to operate only when arming the system with the transmitter and all protected entries must be closed to initi[...]

Remote Panic Feature Remote Panic Activation From The Transmitter: Should you feel threatened or the need to attract attention you can activate your system's Remote Panic feature at any time by depressing and holding the large transmitter button for 3 seconds. Your system will respond by sounding the siren, locking the doors and flashing the e[...]

Automatic Transmitter Verification TM : After the ignition is turned "on", the LED Status Indicator will flash and pause to indicate the number of transmitters programmed to operate your security system. For example: two flashes and pause indicates that only two transmitters are encoded to operate your system. Whenever you leave your vehi[...]

This checklist helps when programming features. Before attempting feature programming, please carefully read pages 27-38 to become familiar with the features and the programming procedure. To best use this checklist, mark each applicable box with "" next to the feature to be changed before entering Features Programming Mode. As each feat[...]

transmitter activating the 3rd Channel Output, but only when the ignition is "on". The Anti-Carjacking feature automatically activates for each of the three described conditions, provided that each has been programmed to operate. In each of the three methods, the vehicle operator has 53 seconds to press the Valet Switch to cancel the Anti[...]

6) Press the small left transmitter button to turn the feature "off". When done, the siren will respond with two chirps. If the Valet Switch is not pressed or if a transmitter signal is not received within a 10 second period, the Programmable Features learning process will automatically terminate. The 22 Programmable Features are: 1) Igni[...]

Feature #6: Doors Lock At Ignition "On" (Factory Setting ON) Feature Turned On: The security system will automatically lock the vehicle's doors one second after the ignition switch is turned "on". This feature adds considerable personal security to you and your family. Feature #7: Unlock Output #1 At Ignition "Off"[...]

Feature #17: 30 / 60 Second Activated Alarm Cycle (Factory Setting 60 Seconds (ON) Feature Turned On: Upon activation, the siren will sound and the parking lights will flash for 60 seconds. Feature Turned Off: Upon activation, the siren will sound and the parking lights will flash for 30 seconds. Please note that the shorter 30 second activated tim[...]

This device complies with FCC Rules part 15. Operation is subject to the following two conditions, (1) This device may not cause harmful interference and, (2) This device must accept any interference that may be received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference [...]