Ir para a página of
Manuais similares
-
Switch
Extron electronic DVI DA2
2 páginas 0.35 mb -
Switch
Extron electronic 128
104 páginas 4.67 mb -
Switch
Extron electronic SW2 DVI A
2 páginas 0.23 mb -
Switch
Extron electronic MLC 52 RS MK
4 páginas 4.38 mb -
Switch
Extron electronic DFX 100
2 páginas 1.05 mb -
Switch
Extron electronic TPX 88 Series
1 páginas 0.76 mb -
Switch
Extron electronic MLS 506
4 páginas 0.09 mb -
Switch
Extron electronic MLS 103 V
25 páginas 1.98 mb
Bom manual de uso
As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Extron electronic 12800. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoExtron electronic 12800 vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.
O que é a instrução?
A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Extron electronic 12800 você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.
Infelizmente, pequenos usuários tomam o tempo para ler o manual Extron electronic 12800, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.
Então, o que deve conter o manual perfeito?
Primeiro, o manual Extron electronic 12800 deve conte:
- dados técnicos do dispositivo Extron electronic 12800
- nome do fabricante e ano de fabricação do dispositivo Extron electronic 12800
- instruções de utilização, regulação e manutenção do dispositivo Extron electronic 12800
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes
Por que você não ler manuais?
Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Extron electronic 12800 não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Extron electronic 12800 e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Extron electronic na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Extron electronic 12800, como para a versão papel.
Por que ler manuais?
Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Extron electronic 12800, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.
Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Extron electronic 12800. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação
Índice do manual
-
Página 1
Matrix 12800 Series Matrix 12800 Wideband, Video, Sync, and Audio Matrix Switchers 68-556-01 Rev . C 10 11[...]
-
Página 2
This symbol is intended to alert the user of important operating and maintenance (servicing) instructions in the literature provided with the equipment. This symbol is intended to alert the user of the presence of uninsulated dangerous voltage within the product’ s enclosure that may present a risk of electric shock. Caution Read Instructions •[...]
-
Página 3
FCC Class A Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interfer ence received, including interference that ma[...]
-
Página 4
i Matrix 12800 Switchers • T able of Contents PRELIMINAR Y T able of Contents Chapter One • Introduction ....................................................................................................... 1-1 About the Matrix 12800 Switcher ................................................................................. 1-2 Feature .[...]
-
Página 5
T able of Content, cont’d Matrix 12800 Switchers • T able of Contents ii PRELIMINAR Y Programming the matrix offline (emulate mode) ............................................................. 3-18 Saving and restoring matrix settings ................................................................................... 3-20 Creating program [...]
-
Página 6
iii Matrix 12800 Switchers • T able of Contents PRELIMINAR Y Conguration T ab ...................................................................................................................... 5-5 System Configuration page ..................................................................................................... 5-5 Administrat[...]
-
Página 7
T able of Content, cont’d Matrix 12800 Switchers • T able of Contents iv PRELIMINAR Y Reoving and Intalling the I/O Card and Setting the Audio Gain .......... 6-16 Removing the I/O card ............................................................................................................ 6-18 Setting the default audio gain ......[...]
-
Página 8
PRELIMINAR Y Matrix 12800 Switchers 1 Chapter One Intr oduction About the Matrix 12800 Switchers Features Definitions[...]
-
Página 9
Matrix 12800 Switchers • Introduction 1-2 Intr oduction PRELIMINAR Y About the Matrix 12800 Switcher The Extron Matrix 12800 Series of switchers is a family of matrix switcher basic module enclosures (BMEs) and an optional fr ont panel controller (FPC 5000) that allows you to create video and audio matrix systems with up to 128 inputs and 128 [...]
-
Página 10
1-3 Matrix 12800 Switchers • Introduction PRELIMINAR Y EXT . FDD MOUSE K/B NET PRN AC 100V-230V INPU T DIO COM4 COM3 VG A COM2 COM1 I o DISCONNECT BOTH POWER CORDS BEFORE SE RV ICING. 100-240V 5.0A MAX 50/60Hz FUSE 250V 5.0A T 100-240V 5.0A MAX 50/60Hz FUSE 250V 5.0A T PRIMA RY AC POWER INPUT POWER SUPPLIES CPU ST AT US LISTED 1T23 I.T.E. BME PRI[...]
-
Página 11
Intr oduction, cont’d Matrix 12800 Switchers • Introduction 1-4 PRELIMINAR Y Featur e Input and output connectors — All connectors are clearly labeled as either input or output for easy installation. W ith the Extron virtualization/control softwar e, a visual map can be printed for easy repr esentation of the virtual I/Os. This feature r e[...]
-
Página 12
1-5 Matrix 12800 Switchers • Introduction PRELIMINAR Y Operational flexibility — Operations such as input/output selection, setting of presets, and adjustment of audio levels can be performed at the fr ont panel controller , over the primary and secondary RS-232/RS-422 links, or via the Ethernet link. The RS-232/RS-422 links allow remote contr[...]
-
Página 13
Intr oduction, cont’d Matrix 12800 Switchers • Introduction 1-6 PRELIMINAR Y Operational reliability — The Matrix 12800 can support round-the-clock operation in mission-critical applications, using a combination of self-diagnosis, hot- swappable components, and optional redundant components. • Advanced computer-aided diagnostics — The [...]
-
Página 14
1-7 Matrix 12800 Switchers • Introduction PRELIMINAR Y • Dual redundant, hot swappable cooling fans — Four cooling fans are provided for ventilation and heat management. Fan and temperatur e sensors identify problems, which ar e reported locally with visual indications and remotely via the Ethernet and serial port links. Fans and the filt[...]
-
Página 15
Intr oduction, cont’d Matrix 12800 Switchers • Introduction 1-8 PRELIMINAR Y Definitions The following terms apply to Extron Matrix Switchers, and ar e used throughout this manual: T ie — An input-to-output connection. Set of ties — An input tied to two or more outputs. (An output can never be tied to more than one input.) Configuration ?[...]
-
Página 16
PRELIMINAR Y Matrix 12800 Switchers 2 Chapter T wo Intallation Installation Overview Rack Mounting the Switcher Rear Panel Connections and Settings Other Settings[...]
-
Página 17
Matrix 12800 Switchers • Installation 2-2 Intallation PRELIMINAR Y Intallation Overview The Matrix 12800 BMEs that make up a Matrix 12800 system can be installed in a rack or a cabinet, if desired. Each BME must be connected on a daisy chain to the other BMEs in the system and cannot be separated from the other BMEs by mor e than 25 feet (7[...]
-
Página 18
2-3 Matrix 12800 Switchers • Installation PRELIMINAR Y Rack Mounting the Switcher The Matrix 12800 sync, wideband video, video, and audio BMEs are rack- mountable, 10U high, 17.5-inch wide (19-inch wide, including rack ears) metal enclosures. The appr opriate rack mounting kit is included with the switcher . Rack mount the switcher as follows: UL[...]
-
Página 19
Intallation, cont’d Matrix 12800 Switchers • Installation 2-4 PRELIMINAR Y Rear Panel Connection and Setting All connectors and switches (with the exception of the serial port protocol, baud rate, and sync termination DIP switches) ar e on the rear panel. Figur e 2-1 shows the Matrix 12800 wideband video switcher . The sync and video s[...]
-
Página 20
2-5 Matrix 12800 Switchers • Installation PRELIMINAR Y k Balanced and unbalanced audio input connectors — See page 2-13 . l Audio outputs connectors — See page 2-14 . m FPC Comm port — (FUTURE CAP ABILITY) n MCP/MKP Comm ports — See page 2-14 . o Ethernet port — See page 2-15 . p External Sync connectors — See page 2-16 . Pre-virtuali[...]
-
Página 21
Intallation, cont’d Matrix 12800 Switchers • Installation 2-6 PRELIMINAR Y b BME COMM interconnect ports — If the Matrix 12800 system consists of more than one BME, the BMEs must be connected together in a daisy chain using Extron-supplied RJ-45 cables. Connect the first daisy chain from the BME Comm Out connector on BME 0 to the nearest [...]
-
Página 22
2-7 Matrix 12800 Switchers • Installation PRELIMINAR Y Serial port c Primary and Secondary RS-232/RS-422 ports — For systems consisting of a single switcher or for BME 0 on a multi-BME system, connect host devices (such as computers or touch panel control systems) or MCP 1000 remote control panels (see the MCP 1000 Remote Contr ol Panel User[...]
-
Página 23
Intallation, cont’d Matrix 12800 Switchers • Installation 2-8 PRELIMINAR Y Ground d Ground terminal — If the power outlets do not provide connections to the protective ground of the building , connect ground straps between this terminal lug on all BMEs and a hard building gr ound. Secure the gr ound straps with the nut and washer included [...]
-
Página 24
2-9 Matrix 12800 Switchers • Installation PRELIMINAR Y f Primary and Redundant AC Power Input switches — For BME 0 to recognize all of the BMEs in the daisy chain, BME 0 may not be powered on befor e the other BMEs. Rather , turn on BME 0 at the same time or after the other BMEs. N During shipment, circuit cards can become dislodged fr om their[...]
-
Página 25
Intallation, cont’d Matrix 12800 Switchers • Installation 2-10 PRELIMINAR Y Virtualization/Contr ol Software The Extron-supplied Matrix 12800 System V irtualization/Control softwar e, which runs on a W indows-type computer and communicates with the matrix switcher via the Ethernet, RS-232/RS-422 ports, or each on BME 0, provides an easy way [...]
-
Página 26
2-11 Matrix 12800 Switchers • Installation PRELIMINAR Y 4 . Follow the on-screen instructions. By default, the installation of the Matrix Switchers Control Pr ogram creates a MTRX6400 dir ectory , and it places the following two icons into a group folder named “Extr on ElectronicsMatrix Switchers”: • Matrix Switcher 6400+12800 C[...]
-
Página 27
Intallation, cont’d Matrix 12800 Switchers • Installation 2-12 PRELIMINAR Y Pot-Virtualization operation Wideband video, low reolution video, and nc connection (wideband, video, and nc BME onl) 9 10 W ideband and sync input and output connectors — Use worksheets, printouts from the Matrix 12800 System/V irtual[...]
-
Página 28
2-13 Matrix 12800 Switchers • Installation PRELIMINAR Y N For audio inputs and outputs, the length of exposed wires is critical. The ideal length is 3/16-inch ( 5 mm) . • Ifthestrippedsectionofwireislongerthan3/16-inch,theexposedwir esmay touch, causing a short circuit between them. • Ifthe?[...]
-
Página 29
Intallation, cont’d Matrix 12800 Switchers • Installation 2-14 PRELIMINAR Y l Audio outputs connectors — These 3.5 mm, 5-pole captive screw connectors output the selected unamplified, line level audio. Connect audio devices, such as an audio amplifier or powered speakers. See figure 2-12 to pr operly wire an output connector . Use the s[...]
-
Página 30
2-15 Matrix 12800 Switchers • Installation PRELIMINAR Y o Ethernet port — For systems consisting of a single switcher or for BME 0 on a multi-BME system, if desired connect the Matrix 12800 either dir ectly to an FPC 5000 Front Panel Contr oller or to an Ethernet LAN via this RJ-45 connector (figure 2-14). If you ar e connecting to a LAN, you [...]
-
Página 31
Intallation, cont’d Matrix 12800 Switchers • Installation 2-16 PRELIMINAR Y A cable that is wired as T568A at one end and T568B at the other (Tx and Rx pairs rev ersed) is a "crossover" cab le. A cable that is wired the same at both ends is called a "straight-through" cable , because no pin/pair assignments are sw apped. [...]
-
Página 32
2-17 Matrix 12800 Switchers • Installation PRELIMINAR Y Figure 2-17 shows another configuration, in which the timing sour ce passes through thr ee video cameras and a video scan converter before connecting to the switcher . This type of video camera is capable of synchronizing with the external timing source for video editing applications. IN SD[...]
-
Página 33
Intallation, cont’d Matrix 12800 Switchers • Installation 2-18 PRELIMINAR Y Other Setting Serial port protocol witche The controller car d has a DIP switch that allows you to select between the RS-232 and RS-422 protocol for the r ear panel RS-232/RS-422 ports. RS-232 is the default setting. See “ Swapping the serial port protocol[...]
-
Página 34
PRELIMINAR Y Matrix 12800 Switchers 3 Chapter Thr ee V irtualization/Contr ol Softwar e Explaining Virtual I/O Switching Virtualization/Control Program Special Characters[...]
-
Página 35
Matrix 12800 Switchers • Virtualization/Control Softwar e 3-2 V irtualization/Contr ol Software PRELIMINAR Y Explaining V irtual I/O Switching A Matrix 12800 system consists of from one to nine BMEs, each of which can have as many as 128 inputs and 128 outputs. It is usually desirable to have certain inputs switch together as a set, to follow eac[...]
-
Página 36
3-3 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y The largest possible system consists of thr ee 128 x 128 video BMEs, two 128 x 128 sync BMEs, and one 128 x 128 audio BME. This system can then be mapped to become a matrix with 128 virtual inputs and 128 virtual outputs in seven virtual planes (R, G, B, H, V , left-channe[...]
-
Página 37
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-4 PRELIMINAR Y V irtualization/Control Pr ogra The Extron-supplied Matrix 12800/6400/3200 V irtualization/Control softwar e runs in a W indows-type computer and communicates with the matrix switcher via the primary or secondary RS-232/RS-422[...]
-
Página 38
3-5 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Creating a virtual I/O witching te (ap) The following detailed example uses the V irtualization/Control software to cr eate a virtual I/O switching system within the physical hardwar e. This process generates and uploads a virtual map to the Matrix 12800 [...]
-
Página 39
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-6 PRELIMINAR Y After you select the Comm port and click OK , the software looks for the Matrix system and reads its har dware configuration, the type and size of each BME. The software then r eads all of the current settings, such as the ties,[...]
-
Página 40
3-7 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y 4 . On the menu bar , click System-Config to show the V irtual Map screen (figure 3-3). Figure 3-3 — Virtual Map scr een[...]
-
Página 41
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-8 PRELIMINAR Y 5. On the menu bar , click Configure > Physical Switchers to show the Physical Configuration screen (figur e 3-4). Check this screen to ensur e that all BMEs were seen on pr ogram startup and that their type and size is repo[...]
-
Página 42
3-9 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y a . If a sync BME was found, you can specify , in the Sync Config box, whether the V irtualization/Control program is to map the system using Composite sync (one plane) or Separate H + V sync (two planes). b . In the Ordering box, you can specify whether the program is to[...]
-
Página 43
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-10 PRELIMINAR Y 10 . If desired, on the V irtual Map screen menu bar , click Print Maps to cr eate a hard copy map of the virtual system. If you send the map to a color printer (select the printer by clicking on File > Select printer on the [...]
-
Página 44
3-11 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Figure 3-6 — Virtual map and list fields of Virtual Map screen Map an unused connector to replace a curr ent connector on the V irtual Map screen as follow: 1 . Click the Edit Mode box to enable mapping. 2 . Click and begin dragging the unused connector . When you star[...]
-
Página 45
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-12 PRELIMINAR Y 4 . When you are finished editing the virtual map, click the Take button to accept the changes. If you decide that you do not want these changes, click Return to Main without Taking to reject the changes. 5 . Click the End Edit[...]
-
Página 46
3-13 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y N If you clicked Emulate to create a pr ogram for a system in advance without being connected to it, you need to define the number and type (video, sync, or audio) of BMEs, the number of inputs, and the number of outputs for the Matrix 12800 system you are emulating. See[...]
-
Página 47
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-14 PRELIMINAR Y Reote controlling the Matrix 12800 te BME 0 saves the settings in non-volatile memory , so once the system is virtualized, there is no r equirement to ever run the V irtualization/Contr ol program again. However ,[...]
-
Página 48
3-15 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Ties T ies appear as solid lines in various colors on main screen of the V irtualization/Control program. The dif ferent colors indicate dif ferent follow and breakaway configurations. If both video and audio ar e tied, the tie is indicated in blue. If video only is tied[...]
-
Página 49
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-16 PRELIMINAR Y Presets After you have created all of the ties that ar e needed for a specific task, the configuration can be saved as either a global or room pr eset. The Matrix 12800 can support up to 64 global presets and up to 10 r oom pr[...]
-
Página 50
3-17 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Icon and caption For your convenience, you can assign a device icon, a name, or both to any of the virtual inputs or outputs using the devices palette. The icons are saved by the program, not sent to the switcher . T o access the Devices screen (figure 3-1 1), righ[...]
-
Página 51
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-18 PRELIMINAR Y Prograing the atrix ofine (eulate ode) The V irtualization/Control program pr ovides an emulation mode, in which you can build and save a configuration file off-line, without connection to a Matrix 12800 syst[...]
-
Página 52
3-19 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y 5 . If you have not virtualized the system repr esented by your startup file, the V irtual Configuration screen appears (figure 3-5). This scr een shows how the software has mapped the physical system into a virtual system. Ther e are several variables that you can cha[...]
-
Página 53
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-20 PRELIMINAR Y Saving and retoring atrix etting In on-line (as opposed to emulation mode) operation, the V irtualization/Control program r eads the source file, Mtrx12800.ini, upon startup. The pr ogram reads the file to display [...]
-
Página 54
3-21 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Creating pr ogra bte tring The Matrix 12800 system can be controlled and pr ogrammed from a contr ol system, via the RS-232/RS-422 port. The control systems need to be taught what bytes to send to the system to communicate with the Matrix system. Chapter 4 of [...]
-
Página 55
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-22 PRELIMINAR Y Logging on to the witcher via the Ethernet 1 . On the PC, click Start > Programs > Extron Electronics > Matrix 12800/6400/3200 Control Program to start the program. 2 . When prompted for a port, select IP [LAN] (fig[...]
-
Página 56
3-23 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Ethernet protocol etting The IP settings/options scr een (figure 3-16) pr ovides a location for observing and, if connected via the RS-232/RS-422 link or if logged on via the Ethernet port as an administrator , editing settings unique to the Ethernet interface. Acc[...]
-
Página 57
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-24 PRELIMINAR Y Address and Name elds The Matrix IP Address field contains the IP addr ess of the connected matrix switcher . This value is encoded in the flash memory in the switcher . The Gateway IP Address field identifies the address[...]
-
Página 58
3-25 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Date and Time (GMT) elds The Date field displays the current date in the Gr eenwich Mean T ime (GMT) zone. The T ime (GMT) field displays the current time in the GMT zone. If desired, adjust either of these values as follows: 1 . Click in the desired field. The fie[...]
-
Página 59
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-26 PRELIMINAR Y Edit any of these password fields as follows: 1 . Click in the desired Passwor d field. The pointer tool becomes a text cursor . 2 . Edit the case-sensitive password as desir ed. 3 . Press the T ab key on the keyboard or click[...]
-
Página 60
3-27 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Window button and drop boxe The buttons and drop boxes on the right side of the pr ogram window perform the following functions: RGB Mute — T oggles the video mute on and off. Audio Mute — T oggles the audio mute on and off. Room menu — Displays a list of u[...]
-
Página 61
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-28 PRELIMINAR Y Tools menu Edit/View Config — Displays the V irtual Map screen, which graphically presents the virtual map and allows you to make changes to the map. List Remote Keypads — Shows the status of all possible MKP 1200 Remote Key[...]
-
Página 62
3-29 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Preferences menu Immediate Changes — Causes changes to take effect immediately . Hold/Verify Changes — Delays implementation of changes until the Changes – T ake button is pressed. Show all tie-lines — Causes the main screen to display all ties at once, as shown i[...]
-
Página 63
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-30 PRELIMINAR Y Ties as Crosspoints — Displays ties as a matrix of inputs and outputs (figure 3-20). Made ties are indicated as blue (video and audio) boxes or boxes of the applicable color for each video plane. T ies that will take effect w[...]
-
Página 64
3-31 Matrix 12800 Switchers • Virtualization/Control Softwar e PRELIMINAR Y Special Character Certain characters are r eserved for specific functions. The switcher does not accept these characters as part of preset names, the name of the switcher , passwords, or locally created file names. The switcher rejects or Extr on does not recommend t[...]
-
Página 65
V irtualization/Control Softwar e, cont’d Matrix 12800 Switchers • Virtualization/Control Softwar e 3-32 PRELIMINAR Y[...]
-
Página 66
PRELIMINAR Y Matrix 12800 Switchers 4 Chapter Four Pr ograing Guide RS-232/RS-422 Ports Ethernet (LAN) Port Host-to-Switcher Instructions Switcher-Initiated Messages Switcher Error Responses Using the Command and Response T ables Special Characters[...]
-
Página 67
Matrix 12800 Switchers • Programming Guide 4-2 Pr ograing Guide PRELIMINAR Y RS-232/RS-422 Port The rear panel RS-232/RS-422 connectors (figur e 4-1) of the matrix switcher BME 0 can be connected to the serial port output of a host device such as a computer running the HyperT erminal utility or a control system. This connection makes Si[...]
-
Página 68
4-3 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y Ether net (LAN) Port The rear panel Ethernet connector (figur e 4-2) on the matrix switcher BME 0 can be connected to the an Ethernet LAN or W AN. Communication between the switcher and the controlling device is via T elnet (a TCP socket using port 23). This connection makes SIS control[...]
-
Página 69
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-4 PRELIMINAR Y Etablihing a connection Establish a network connection to BME 0 as follows: 1 . Open a TCP socket to port 23 using the IP address of the BME. N If the local system administrators have not changed the value, the factory- specified default, 192.168.2[...]
-
Página 70
4-5 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y Switcher -Initiated Meage When a local event such as a power-up occurs, the switcher r esponds by sending a message to the host. The switcher-initiated messages ar e listed below (underlined). ] (C) Copyright 2003, Extron Electr onics Matrix12800, V x . xx , date and time ] The [...]
-
Página 71
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-6 PRELIMINAR Y Uing the Coand and Repone T able The command and response tables begin on page 4-8. Lower case letters ar e acceptable in the command field except where indicated for the gain and attenuation commands. The table below shows the hexadeci[...]
-
Página 72
4-7 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y X1( = Signal type: d e n g i s s a n U o i d u a o N o e r e t S o n o m t f e L d e n g i s s a n U 0 0 B G R 1 01 11 2 S B G R 2 02 12 2 V H B G R 3 03 13 2 o e d i v e t i s o p m o C 4 04 14 2 o e d i v - S 5 05 15 2 o e d i v t n e n o p m o C 6 06 16 2 y l n o o i d u A 7 17 2 X2) [...]
-
Página 73
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-8 PRELIMINAR Y Coand and repone table for SIS coand Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription Create ties N • Commandscanbeenteredback-to-backinastring[...]
-
Página 74
4-9 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription Read tie N The& view tie commandforRGBandthe% view tie command for video can be used interchangeably on the matrix switcher . Read video and[...]
-
Página 75
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-10 PRELIMINAR Y Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription Create and r ecall preet N • Ifyoutrytorecallapr esetthatisnotsaved,thematrixswitcherre[...]
-
Página 76
4-11 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y N X1) = Room number 00 – 32 X1! = Name Up to 12 alphanumeric characters X@ = Output number 001 – maximum number of outputs X1@ = Room preset number 10 maximum X! = Input number 000 – maximum number of inputs (000 = untied) X$ = Mute status 0 = off (unmuted) 1 = on (muted) Co[...]
-
Página 77
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-12 PRELIMINAR Y Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription View tie, gain, ute, pr eet, le tatu, DSVP , and input tatu V iew 16 video ties for global preset X( ( All inputs [...]
-
Página 78
4-13 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription View tie, gain, ute, pr eet, le tatu, DSVP , and input tatu V iew 16 audio ties for room X* , preset X1@ ( All inputs and outputs shown are virtual[...]
-
Página 79
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-14 PRELIMINAR Y Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription RGB dela Set RGB delay EX@ * X1* D } Out X@• Dly X1*] Example: E 4*7D } Out004 • Dly07 ] Set the RGB interval for ties to output 4 to 3.5[...]
-
Página 80
4-15 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription Resets Intialize virtual map size EX! * X@ ZM } Zpm X! * X@] Intialize the virtual map size. Reset global presets and names E ZG } Zpg ] Clear all global presets and their names[...]
-
Página 81
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-16 PRELIMINAR Y Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription Inforation requet Information request, system I X2! X X2@ •T X2# •U X2$ •M X2% X X2^] Input size X output size, BME type connecte[...]
-
Página 82
4-17 Matrix 12800 Switchers • Programming Guide PRELIMINAR Y Coand and repone table for IP SIS coand Sbol denition X4) = Matrix name (Up to 240 characters) N The following characters ar e invalid or not recommended in the name: {space} ~ , @ = ` [ ] { } < > ‘ “ ; : | and ?. X4! = Default name Factory d[...]
-
Página 83
Pr ograing Guide, cont’d Matrix 12800 Switchers • Programming Guide 4-18 PRELIMINAR Y Coand and repone table for IP SIS coand Coand ASCII coand (hot to witcher) Response (witcher to hot) Additional decription Set matrix name (location) EX4) CN } Ipn• X4)] Read matrix name (location) E CN }[...]
-
Página 84
PRELIMINAR Y Matrix 12800 Switchers 5 Chapter Five W eb Operation Download the Startup Page Status T ab Configuration T ab File Management T ab Control T ab[...]
-
Página 85
Matrix 12800 Switchers • Web Operations 5-2 W eb Operation PRELIMINAR Y The Matrix 12800 can be controlled and operated thr ough the Ethernet port on BME 0, across the LAN or W AN, using a W eb browser , such as the Microsoft Internet Explorer . The browser down loads a series of displays that have the appearance of W eb pages. This chapter de[...]
-
Página 86
5-3 Matrix 12800 Switchers • Web Operations PRELIMINAR Y 7 . The switcher checks several possibilities, in the following order , and then responds accor dingly: a . Does the addr ess include a specific file name, such as 10.13.156.10/file_ name.html?Ifso,theswitcherdownloadsthatHTML page. b . Isthereal[...]
-
Página 87
W eb Operation, cont’d Matrix 12800 Switchers • Web Operations 5-4 PRELIMINAR Y BME Statu page T o observe more status details for a specific BME, from the System Status page, click the BME number , either at the top of the status column or in the brackets to the left of the screen. The Matrix 12800 downloads the BME Status page (figur [...]
-
Página 88
5-5 Matrix 12800 Switchers • Web Operations PRELIMINAR Y DSVP page T o observe the Digital Sync V alidation Processing (DSVP) for an input, fr om the System Status page, click the DSVP link to the left of the screen (figur e 5-5). N DSVP is only available in systems that include a sync BME. Select System Status Refresh Figure 5-5 — DSVP page C[...]
-
Página 89
W eb Operation, cont’d Matrix 12800 Switchers • Web Operations 5-6 PRELIMINAR Y Adinitration eld • EthernetconnectiontotheMatrixswitcher ,eitherenteringSIScommands(see chapter 4, “ Programming Guide ”), using the Matrix 12800/6400/3200 Contr ol Program (see chapter 3, “ V irtualization/[...]
-
Página 90
5-7 Matrix 12800 Switchers • Web Operations PRELIMINAR Y Eail Setting page The Email Settings page (figure 5-7) can be r eached by clicking on the Email Settings link on the system configuration page. The Email Settings page has fields for entering all of the information needed to set up the e-mail notification capabilities of the switc[...]
-
Página 91
W eb Operation, cont’d Matrix 12800 Switchers • Web Operations 5-8 PRELIMINAR Y Eail Addre eld The nine Email Address fields identify the e-mail addr esses of the personnel to whom the Matrix 12800 e-mails notification of its failure and r epair status. Standard e-mail addr ess conventions (nnnnn@xxx.com) apply . The check b[...]
-
Página 92
5-9 Matrix 12800 Switchers • Web Operations PRELIMINAR Y Contr ol T ab Set and View Tie page Y ou can create ties on the Set and V iew T ies page (figure 5-9). Access the Set and V iew T ies page by clicking the Control tab. Refresh or Select Different Tie (Output) Groups Select Global Presets Select RGBHV Settings Select Input and Output Map[...]
-
Página 93
W eb Operation, cont’d Matrix 12800 Switchers • Web Operations 5-10 PRELIMINAR Y Create a tie as follows: 1 . Click the Video Only , Audio Only , or Video & Audio button to select video, audio, or both for switching (audio follow or audio breakaway). Each mouse click of a button toggles the other two buttons off. 2 . Move the mouse point[...]
-
Página 94
5-11 Matrix 12800 Switchers • Web Operations PRELIMINAR Y Changing the input gain and attenuation (te with audio BME) Users can set the level of audio gain or attenuation (-24 dB to +9 dB) for each input from the RGBHV Settings page. Audio levels can be adjusted so there are no noticeable volume differ ences between sources. Cha[...]
-
Página 95
W eb Operation, cont’d Matrix 12800 Switchers • Web Operations 5-12 PRELIMINAR Y Muting and unuting one or all output Mute one or all outputs as follows: 1 . T o select an individual output to mute or unmute, click the Output drop box. A drop-down scroll box appears (figur e 5-13). Figure 5-13 — Output selection dr op box 2 . Click [...]
-
Página 96
5-13 Matrix 12800 Switchers • Web Operations PRELIMINAR Y 4 . Click the RGB delay drop box. A drop-down scroll box appears (figur e 5-15). Figure 5-15 — RGB delay dr op box 5 . Click the desired RGB delay . Global Preet page Y ou can save and recall global presets fr om the Global Presets page (figure 5-16). Access the Global Presets pa[...]
-
Página 97
W eb Operation, cont’d Matrix 12800 Switchers • Web Operations 5-14 PRELIMINAR Y Saving a preet Save the current configuration (configuration 0) as a pr eset as follows: 1 . Click the Save Preset button. 2 . Select the desired pr eset by clicking on one of the presets listed. T o create a new preset, click the on one of the [unassigned][...]
-
Página 98
PRELIMINAR Y Matrix 12800 Switchers 6 Chapter 6 Upgrade and Maintenance Opening and Closing the Matrix Switcher Removing and Installing the Fan Assembly Removing and Installing the Power Supply Module Replacing the Fuse Removing and Cleaning the Filter Setting the DIP Switches Removing and Installing the Controller Card and Replacing the Firmwar[...]
-
Página 99
Matrix 12800 Switchers • Upgrades and Maintenance 6-2 Upgrade and Maintenance PRELIMINAR Y N For proper cooling and air flow , all access doors should be closed during normal switcher operations. Opening and Cloing the Matrix Switcher Opening the witcher All maintenance and upgrade procedur es requir e access to the interior of the swit[...]
-
Página 100
6-3 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y Cloing the witcher 1 . If the door was removed, r eplace the door by lifting it above the hinge pins and lowering it onto the pins. 2 . Shut the door . 3 . T urn the bottom door fastener clockwise fr om to . 4 . T urn the top door fastener counter clockwise from to (figure [...]
-
Página 101
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-4 PRELIMINAR Y Reoving and Intalling the Fan Aebl Thefourfansonthefanassemblydoorarepair ed;twoprimaryfansinone assembly and two redundant fans in another assembly (figur e 6-3). The two fans in [...]
-
Página 102
6-5 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y PRIMAR Y A REDUND ANT A ON = GOOD OFF = FAILED 2 LED's: ON = GOOD OFF = FAILED 2 LED's: PRIMARY B REDUND ANT B ON = GOOD OFF = FAILED 2 LED's: ON = GOOD OFF = FAILED 2 LED's: CONT POWER SUPPL Y B POWER SUPPL Y A Remove four nuts w/ captive washers (each fan). R[...]
-
Página 103
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-6 PRELIMINAR Y Reoving and Intalling the Power Suppl Module Reoving the power uppl odule The two or four power supply modules (primary power supplies A and B and optional redundant power supplies A and B) are identical and hot-swappable. [...]
-
Página 104
6-7 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y 4 . If a replacement power supply is not being installed immediately , close the fan assembly door and turn the left and right knurled knobs ¼-turn clockwise. C Ensure that you close and secur e the fan assembly door when you have finished this maintenance procedur e. The Matrix[...]
-
Página 105
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-8 PRELIMINAR Y Replacing the Fue The primary and redundant AC power circuits are independently fused. The fuses are accessible on the r ear panel of the switcher . If a fuse opens, the associated primary or redundant power loop shuts down. If this BME does[...]
-
Página 106
6-9 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y Reoving and Cleaning the Filter C The filter can be removed for cleaning without powering down the switcher , but do not operate the switcher without filtering longer than necessary to clean the filter . Remove and clean the air filter as follows: 1 . Open the front door . [...]
-
Página 107
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-10 PRELIMINAR Y Setting the DIP Switche Swapping the erial port protocol (RS-232/RS-422) N If this BME is equipped with a redundant contr oller , the primary and redundant controllers must be configur ed for the same communications protocol. The Matrix[...]
-
Página 108
6-11 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y Changing the erial port baud rate N If this BME is equipped with a redundant contr oller , the primary and redundant controllers must be configur ed for the same RS-232/RS-422 communications baud rate. The Matrix 12800 controller car ds are factory configur ed for 9600 baud [...]
-
Página 109
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-12 PRELIMINAR Y Changing the nc terination In a sync BME, the first eight physical inputs on each I/O card ar e equipped with sync termination DIP switches. Each switch pr ovides the option of selecting either 510 ohms or 75 ohms. Change the sync te[...]
-
Página 110
6-13 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y Reoving and Intalling the Contr oller Card and Replacing the Firwar e Reoving the priar or redundant contr oller card N The controller cards ar e hot-swappable. If this BME has redundant contr oller cards, either controller card can be r emoved without powering [...]
-
Página 111
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-14 PRELIMINAR Y 4 . Slide the card out of the car dcage. 5 . Place the removed car d on an anti-static surface or in an anti-static container . 6 . If a replacement car d is not being installed immediately , close the fan assembly door and turn the left and r[...]
-
Página 112
6-15 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y 3 . For IC U6 — Use a PLCC IC puller to remove the existing firmwar e IC. Squeeze the tool to align its hooks with the slots in opposite corners of socket U6. Insert the hooks, squeeze gently , and pull the IC straight out of the socket. Set the IC aside. 4 . For ICs U1 and U2[...]
-
Página 113
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-16 PRELIMINAR Y Reoving and Intalling the I/O Car d and Setting the Audio Gain N The I/O cards are hot-swappable. Y ou do not need to power down the switcher to remove an I/O card. Input and output circuit car ds (figure 6-13 thr ough figure 6-15) can[...]
-
Página 114
6-17 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y F ront Wideband and low resolution video cards Video Outputs 65-80 Green Red Video Outputs 81-96 Green Red Video Outputs 97-112 Green Red Video Outputs 113-128 Green Red Video Outputs 49-64 Green Red Video Inputs 1-32 Green Red Video Inputs 33-64 Green Red Video Inputs 65-96 Gree[...]
-
Página 115
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-18 PRELIMINAR Y Reoving the I/O card Remove I/O cards as follows: 1 . Open the front door . 2 . On the I/O cardcage door , turn the left and right knurled knobs ¼-turn counterclockwise. Lower the door . C Do not touch the electronic components or the conn[...]
-
Página 116
6-19 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y Setting the default audio gain By default, the audio gain of each output is set to 0 dB (unbalanced) and 6 dB (balanced). Y ou can reduce this setting by 6 dB (-6 dB [unbalanced], 0 dB [balanced]). Change the audio gain for one or more outputs as follows: C Do not touch the elect[...]
-
Página 117
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-20 PRELIMINAR Y 3 . Locate the jumper block that corresponds to the output to be set (figur e 6-17). JMP1 sets the gain for the first audio output associated with that card, JPM2 for the second audio output, and so on. Figure 6-17 — Audio output car d jum[...]
-
Página 118
6-21 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y 7 . Close the I/O cardcage door and turn the left and right knurled knobs ¼-turn clockwise. 8 . Close the front door . N If this circuit card installation is a permanent change to the size of the matrix, the system must be virtualized to recognize the change. V irtualize the sys[...]
-
Página 119
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-22 PRELIMINAR Y Controller car d The controller car ds have a green LED and a r ed LED that are visible thr ough holes in the I/O cardcage door . In a BME with a redundant controller , the gr een LED on the active controller flashes to indicate that it is[...]
-
Página 120
6-23 Matrix 12800 Switchers • Upgrades and Maintenance PRELIMINAR Y Input/output card The input and output cards have gr een LEDs and red LEDs that ar e visible through holes in the I/O cardcage door . The green LEDs indicate normal operation. A lit red LED indicates that the car d has had a failure. N The I/O cards are hot-swappable. Y ou do [...]
-
Página 121
Upgrade and Maintenance, cont’d Matrix 12800 Switchers • Upgrades and Maintenance 6-24 PRELIMINAR Y[...]
-
Página 122
PRELIMINAR Y Matrix 12800 Switchers A Appendix A Ether net Connection Ethernet Link Subnetting — A Primer[...]
-
Página 123
Matrix 12800 Switchers • Ethernet Connection A-2 Ether net Connection PRELIMINAR Y Ether net Link The rear panel Ethernet connector on the switcher can be connected to an Ethernet LAN or W AN. This connection makes SIS control of the switcher possible using a computer connected to the same LAN. Ethernet connection The Ethernet cable can be termin[...]
-
Página 124
A-3 Matrix 12800 Switchers • Ethernet Connection PRELIMINAR Y Pinging to deterine Matrix IP Addre The Microsoft ® Ping utility is available at the DOS pr ompt. Ping tests the Ethernet interface between the computer and the switcher . Ping can also be used to determine the actual numeric IP addr ess from an alias and to determine the web[...]
-
Página 125
Ether net Connection, cont’d Matrix 12800 Switchers • Ethernet Connection A-4 PRELIMINAR Y Connecting a a T elnet client The Microsoft T elnet utility is available from the DOS pr ompt. T elnet allows you to input SIS commands to the switcher from the PC via the Ethernet link and the LAN. Access the DOS prompt and start T elnet as follows: 1[...]
-
Página 126
A-5 Matrix 12800 Switchers • Ethernet Connection PRELIMINAR Y Escape character and Esc key When T elnet is first started, the utility advises that the Escape character is ‘Ctrl+]’ . Many SIS commands include the keyboard E key . Consequently , some confusion may exist between the Escape character and the Escape key . The T elnet Escape chara[...]
-
Página 127
Ether net Connection, cont’d Matrix 12800 Switchers • Ethernet Connection A-6 PRELIMINAR Y Subnetting — A Prier It is not the purpose of this manual to describe TCP/IP pr otocol in detail. However , some understanding of TCP/IP subnetting (a subnet is a sub set of a net work — a set of IP devices that have portions of their IP addresses [...]
-
Página 128
A-7 Matrix 12800 Switchers • Ethernet Connection PRELIMINAR Y Deterining whether device are on the ae ubnet T o determine the subnet, the IP address of the local device is compared to the IP address of the r emote device (figure A-6). Each octets of each address are compared or not compared , depending on the value in the related [...]
-
Página 129
Ether net Connection, cont’d Matrix 12800 Switchers • Ethernet Connection A-8 PRELIMINAR Y[...]
-
Página 130
PRELIMINAR Y Matrix 12800 Switchers B Appendix B Refer ence Inforation Specifications Part Numbers and Accessories[...]
-
Página 131
Matrix 12800 Switchers • Reference Information B-2 Refer ence Inforation PRELIMINAR Y Specication Video— wideband/video BME Routing ........................................... 32 x 16 or larger matrix up to 128 x 128, depending on the configuration Gain ................................................. Unity Bandwidth W ideband mod[...]
-
Página 132
B-3 Matrix 12800 Switchers • Reference Information PRELIMINAR Y Input impedance ........................... Inputs 1 - 32: 510 ohms or 75 ohms, switchable Inputs 33 - 128: 510 ohms Output impedance ........................ 75 ohms Horizontal frequency .................... 15 kHz to 150 kHz V ertical frequency .......................... 30 Hz to 1[...]
-
Página 133
Refer ence Inforation, cont’d Matrix 12800 Switchers • Reference Information B-4 PRELIMINAR Y General Power* ............................................. 2(positive-negative),100V ACto240V AC,50-60Hz;internal Matrix 12800 wideband: 150 watts at 1 15 V AC, 60 Hz Matrix 12800 sync: 100 watts at 1 15 V AC, 60 Hz [...]
-
Página 134
B-5 Matrix 12800 Switchers • Reference Information PRELIMINAR Y Part Nuber and Acceorie Matrix 12800 BME Call the Extron S3 Sales & T echnical Support Hotline for part numbers. See the rear cover of this manual for the phone number in your region of the world. Optional accessories These items can be order ed separately: Cont[...]
-
Página 135
Refer ence Inforation, cont’d Matrix 12800 Switchers • Reference Information B-6 PRELIMINAR Y T erination tool and connector Part nuber CTU 300 universal crimp tool 100-241-02 BNC Male RG6 Crimp Connectors (qty . 100) 100-339-01 BNC Male MHR Cable Crimp Connectors (qty . 100) 100-335-01 CTU 100 universal compression tool (BNC, F [...]
-
Página 136
Extr on W arranty Extron Electr onics warrants this product against defects in materials and workmanship for a period of thr ee years from the date of pur chase. In the event of malfunction during the warranty period attributable directly to faulty workmanship and/or materials, Extron Electr onics will, at its option, repair or r eplace said produc[...]
-
Página 137
Extron USA - W est Headquarters + 800.633.9876 Inside USA/Canada Only +1.714.491.1500 F AX: +1.714.491.1517 Extron USA - East +800.633.9876 Inside USA/Canada Only +1.919.863.1794 F AX: +1.919.863.1797 Extron Eur ope +800.3987.6673 Inside Europe Only +31.33.453.4040 F AX: +31.33.453.4050 Extron Asia +800.7339.8766 Inside Asia Only +65.6383.4400 F AX[...]