Fisher & Paykel DD36 manual

US CA NZ AU GB IE User guide DishDraw er® DD36 and DD90 models[...]

[...]

1 Contents Safety and warnings 2 Electrical connection (GB IE only) 5 Operating instructions - Contr ols 6 Operating instructions - Quick start 8 Caring for y our dinnerware 9 Rack ing and accessories 10 Loading suggestions 14 Using tablets 15 W ater har dness and dishwashing 16 W ash programmes and det ergent quantities 17 Detergent dispenser 18 R[...]

2 Y our DishDrawer® has been carefully desig ned to operate safely during normal dish washing procedures . Please keep the following instructions in mind when you are using y our DishDrawer®. Impor tant safet y instruc tions W ARNING! - When using your dishwasher , follow basic precautions, including the following: Read all instructions before us[...]

3 Safety and warnings Impor tant safet y instruc tions Installation This DishDrawer® must be installed and located in accordance with the Installation instructions before it is used. If you did not receive Installation instruction sheets with your DishDrawer®, you can order them by calling your Authorised Repairer or download them from our loc al[...]

4 Safety and warnings Impor tant safet y instruc tions Maintenance Disconnect the appliance from the pow er supply before any cleaning or maintenance. Do not repair or replace any part of the appliance or attempt any servicing unless specifically recommended in this user guide. W e recommend that you call an Authorised Repairer . Keep the floor aro[...]

5 F or Great Britain only Impor tant! This appliance must be earthed. F use replacement The mains lead of this appliance is fitted with a BS 1363A 13 A fused plug. T o change a fuse in this type of plug, use an AST A approv ed fuse to BS 1362 type and proceed as follow s: 1 Remo ve the fuse cover and fuse . 2 F it the replacement 13A fuse int o the[...]

6 Operating instructions - Contr ols P ower button / The / button turns the DishDrawer® on or off . Opening the drawer will automatically turn the DishDra wer® on for 30 seconds. T o end a wash programme in mid cycle, press the / button. Any water in the DishDra wer® will be pumped out. Start/Pause button The button starts a wash programme. Pr e[...]

7 Operating instructions - Contr ols Keylock The Keylock featur e disables all the buttons on the DishDrawer®. T o activate, press and hold the / button until you hear one beep (3 seconds). The light above the / button is lit when Keylock is activated. T o cancel the Keylock feature , press and hold the / button until the light above the / button [...]

8 1 Load dishes Remove all food scraps and load the dishes . 2 Add detergent 3 Check rinse aid 4 Press the / button 5 Select a wash programme 6 Select (optional) 7 Check Ensure there is nothing obstructing the spray arms. The drain filter must be level with the filter plate. Note: to identify these parts, see illustrations in ‘User maintenance in[...]

9 Caring f or your dinnerware The combination of high temperatur es and dishwasher detergent may cause damage to some items if they are washed in the DishDraw er®. Remember , if in any doubt about an y aspect concerning items washed in the DishDraw er®, follow the instructions from the manufacturer of the items, or wash the item b y hand. Cutlery[...]

10 Cutlery basket T o reduce the risk of injury, w e recommend loading knives and sharp utensils with handles facing up. Mix spoons, knives and forks within each section to stop cutlery nesting together and to ensure the water circulates fr eely . Keep stainless steel from touching silv er cutler y to avoid staining . Removable small items c ontain[...]

11 Rack ing and accessories Removable small items c ontainer T o optimise the cutler y space within the basket, the small items container can be placed elsewhere on the base rack. If laid flat, make sure the solid plastic side is facing up. If you place a fully laden small items container under the adjustable racks , it is best to leave the rack sp[...]

12 Rack ing and accessories Stemw are notches These notches help support long-stemmed glassware. This keeps flimsy items (eg light plastic lids and bottles) or large platters and plates stable, so they cannot be dislodged during the wash. Slide the item between the prongs of the clip . Multi-purpose clip Glass supports These clip on the rack wires [...]

13 Rack ing and accessories 2 13 Knife clip (supplied with some models only) This clips onto the adjustable racks and supports k nives and other utensils during the wash. Always ensure that knife blades are facing down. Cup r ack with folding support wire F old the wire up to support tall glasses. Adjustable racks Y ou can adjust these independentl[...]

14 Loading suggestions When loading your DishDr awer®, make sur e that you place items so that water c oming from the rotating spray arms below can r each all areas (wash per formance will be reduc ed if it can’ t) nothing blocks the water from getting to items on the adjustable racks . How NO T to load your DishDra wer® Overcrow ded and wash w[...]

15 Using tablets Impor tant! W e do not recommend using dishw asher tablets in USA and Canada models. The pre-w ash cycle in these models would dissolve the tablet, reducing the cleaning pow er left for the main wash. If you are using tablets, w e highly recommend you use the standard Normal or Heavy programmes only . We do not recommend y ou use t[...]

16 What is wa ter hardness? Hard water is water with a high conc entration of minerals such as calcium and magnesium. In soft water , this concentration is low . W ater hardness varies by geographical location. How does water hardness affect dishwashing? Hard water can be detrimental to the pef ormance of your DishDrawer . Over time, glassware wash[...]

17 W ash programmes Detergent quantities Find out about wat er hardness in your home, then use the table belo w to determine how much detergent to use f or each wash programme. See also section ‘Water hardness and dish washing’ . The detergent dispenser has markings to help you measur e the correct quantities. See following section ‘Detergent[...]

18 Impor tant! Only use powdered detergent recommended for domestic automatic dish washers in the detergent dispenser . Dishw asher detergents are strongly alkaline. They c an be extremely dangerous if swallowed. Av oid contact with the skin and eyes and keep children and infirm persons aw ay from the DishDrawer when it is open. Check that the det [...]

19 W e highly recommend the regular use of liquid rinse aid to g ive the best drying results. Rinse aid gives a streak-fr ee, sparkling clean look to glass and chinaware. In addition, it prev ents metal from tarnishing. The rinse aid dispenser is on the inside of the drawer , located underneath the detergent dispenser . The rinse aid dispenser hold[...]

20 Setting up the water softener Impor tant! Only GB IE models have a built-in w ater softener. Models with water softener are not currently av ailable in New Zealand, Australia, U SA or Canada. Determine the water hardness in your local ar ea Y our local water company will be able t o provide you with inf ormation. Identify the setting you require[...]

21 W ater softener Impor tant! The water softener must alw ays be filled with granular salt made especially for dishw asher water softening systems. W e do not recommend the use of cooking salt lik e table salt, rock salt or pellets as they may contain impurities that will impair or diminish the life of the w ater softener. The salt reservoir W ate[...]

22 Option adjustments The following options can be adjust ed to suit your pref erences: Rinse aid setting Reduce the Rinse aid setting if there is excess f oam after a wash programme or if you ar e using dishwasher tablets with built-in rinse aid. Increase the Rinse aid setting if dishes are wet or streaky after a wash programme . W ater softener s[...]

23 Option adjustments How to make option adjustments FIRST Enter Option adjustment mode: 1 Press the / button to turn power on. Open DishDraw er®. 2 P ress and hold the / and / buttons for 5 seconds until one long beep sounds . FOLL OW THE STEPS BEL OW Rinse aid setting W ater softener setting* Auto power option End of wash programme beeps option [...]

24 User maintenanc e instructions Impor tant! Disconnect the DishDrawer® from the po wer supply and allow all its parts to cool before any cleaning or maintenance. Cleaning the sur faces Impor tant! W e do not recommend the use of the following cleaning a ids on your DishDr awer® as they may damage the surfaces: Plastic or stainless steel scourin[...]

25 User maintenanc e instructions User maintenanc e instructions Cleaning the spray arms and filter pla te Ensure the DishDrawer® is c ool before you start cleaning. T o remove the base rack and spr ay arms 1 Unplug the DishDra wer® or turn it off at the power supply . 2 T ake out the cutler y basket. 3 Unclip the glass supports from the rack wir[...]

26 Problem Possible cause What to do Unclean dishes W ash programme unsuitable for the load. See section ‘ Wash pr ogrammes and detergent quantities ’ for a suitable wash programme, or the soils w ere too heavily baked on and dishes may need soaking. Spray arm(s) unable to rotate. Ensure no items are obstructing the spray arm path. DishDrawer®[...]

27 T roubleshooting Problem Possible C ause What to do Continuous beeping A fault has occurred. Refer to the ‘F ault codes ’ section. Intermittent beeping DishDrawer® is in pause mode. Close the DishDrawer® and press the button. DishDraw er® will not start Po wer supply is not connected. Connect the power supply . The drawer is not closed pr[...]

28 How to rec ognise a fault code When a fault has occurred, the DishDra wer® will continuously beep every second. The fault code will be display ed on the wash programme selector . Each fault code is shown in the follo wing char t. How to att end to a fault code 1 Press the / button briefly to stop the beeping . 2 Press the / button to turn the D[...]

29 F ault codes F ault codes Possible causes What to do F1 Flood switch has been activated. T urn off the water supply to the DishDrawer® and call y our Authorised Ser vice Centre or C ustomer Care . F2 Motor problem. Call your Authorised Service Centre or Customer Car e. F3 T emperature sensor failed. Ensure water coming in thr ough the inlet hos[...]

30 F ault codes F ault codes Possible causes What to do U1 Fill fault due t o... ...water supply not being turned on. OR ...spray arm(s) not being fitted correctly . Check if there is water in the DishDrawer and f ollow the relevant steps below . If there is no water in the DishDrawer: 1 T urn on the water supply to the DishDrawer . 2 Plug the Dish[...]

31 W arranty and ser vice Before y ou call for service or assistance ... Check the things you can do yourself . Refer to the installation instructions and your user guide and check that: 1 y our product is correctly installed 2 y ou are familiar with its normal operation. If after check ing these points you still need assistance, please r efer to t[...]

32 W ash programme data USA & CANADA Heavy Normal F ast Delicate Rinse pre-wash (x2) pre-wash pre-wash pre-wash main wash 150 o F main wash 140 o F main wash 130 o F main wash 120 o F post-rinse (x2) post-rinse (x3) post-rinse post-rinse final rinse 163 o F final rinse 150 o F final rinse 140 o F final rinse 130 o F drying phase dr ying phase d[...]

33 GREA T BRIT AIN AND IRELAND Heavy Normal F ast Delicate Rinse pre-wash main wash 70 o C main wash 65 o C main wash 55 o C main wash 50 o C post-rinse (x2) post-rinse (x2) post-rinse post-rinse final rinse 65 o C final rinse 65 o C final rinse 60 o C final rinse 60 o C drying phase dr ying phase drying phase Heavy ECO Normal ECO* Fast EC O Delica[...]

34 The DishDrawer®s ar e tested to various standards f or both wash and dr y per formance using the parameters detailed below . W ash programme Normal Rinse agent setting 4 Maximum place setting 9 Acc essories to be used in the dishwasher standar ds test Base rack, ‘slide-and-fold’ tines, cutler y basket with cutlery grid, adjustable racks, gl[...]

35 Standards test - NEW ZEALAND and A USTRALIA The DishDrawer®s ar e tested to AS/NZS 2007 standards f or both wash and dr y per formance using the parameters detailed below . W ash programme Normal Eco (At the end of the prog ramme, open the DishDrawer 50 mm to improv e the dr y per formance.) Detergent quantities 26.25g (main wash) Rinse aid set[...]

36 Standards test - GREA T BRIT AIN and IREL AND The DishDrawer®s ar e tested to EN50242 standards f or both wash and dr y per formances using the parameters detailed below . W ash programme Normal Eco Detergent quantities 2.5g (pre-wash) 15.5g (main wash) Rinse aid setting 4 W ater softener setting Adjust the water softener to match the water har[...]

[...]

US CA NZ AU GB IE 05.2010 F&P PN - 590025 B www . sherpaykel.com www . sherpaykel.ca www . sherpaykel.co .nz www . sherpaykel.com.au www . sherpaykel.co .uk www . sherpaykel.ie Copyright © F isher & Paykel 2010. All rights r eser ved. The product specifications in this booklet apply to the specific products and models des[...]