Fisher-Price 77306 manual

Model Number 77306 Please keep this instruction sheet for future reference, as it contains important information. Requires four "C" (LR14) alkaline batteries for control tower; four "AA" (LR6) alkaline batteries for car; and one 9V (6LR61) alkaline battery for remote controller (batteries not included). Adult assembly is require[...]

P arts 2 5 Barrels Crash Gate Flexible Track 3 Cones Dirt Track Ring of Fire Handle Support Control Tower Handle 2 Flags Double Flag Ramp 2 Ramp Rails Starting Ramp 3 Hay Bales 4 Stadium Lights Remote Controller Car Remote Controller Holder #6 x 5 / 8 " Screw - 7 Shown Actual Size Label sheet not shown.[...]

Car Battery Compartment Door 1.5V x 4 “AA” (LR6) Shown Actual Size • Locate the battery compartment on the bottom of the car. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert four "AA" (LR6) alkaline batteries, as indicated inside the battery compartmen[...]

4 Battery Installation Remote Controller Battery Compartment Door 9V 9V (6LR61) Shown Actual Size • Locate the battery compartment on the back of the remote controller. • Loosen the screw in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door. • Insert one 9V (6LR61) alkaline battery, as indicated ins[...]

5 Battery T ips • We recommend using alkaline batteries for longer battery life. • Do not mix old and new batteries. • Do not mix different types of batteries: alkaline , standard (carbon-zinc) or rechargeable (nickel-cadmium). • Remove the batteries during long periods of non-use. Always remove exhausted batteries from the toy. Battery lea[...]

• Position the handle support so the pegs are facing you. • With the checkered side facing down, fit the double flag on to the pegs on the handle support. 6 • Fit the handle onto the handle support as shown. Assembly 2 3 1 1 1 Pegs Double Flag Handle Support Handle Support Handle W ARNING This product contains small par ts in its unassembled [...]

• "Snap" the remote controller holder onto the tab on the bottom of the starting ramp, as shown. • Insert and "snap" the pegs on the bottom of the handle assembly into the matching holes in the starting ramp as shown. 4 5 7 • Insert the handle and starting ramp into the matching holes in the control tower as shown. • Lif[...]

6 8 Assembly 7 • Insert and "snap" the tabs on the ramp into the matching slots in a ramp rail. • Repeat this procedure to attach the other ramp rail. • Gently squeeze the ring of fire to insert the pegs on either end into the matching holes at the top of the ramp assembly, as shown. Ramp Rail Ramp Tabs Ramp Ramp Assembly Ramp Rail [...]

9 Label Decor ation Proper label application will help keep labels looking their best! When applying labels, keep the following guidelines in mind: • Wash hands before applying labels. • Before applying labels, wipe the surface of the toy with a clean, dry cloth to remove dust or oils. • For best results, avoid repositioning a label once it h[...]

10 Mode I - Beginner Driver Mode I is for a beginner or younger driver. Automatic Course Control always keeps the car hugging the track, even over obstacles. Just press the remote controller button to go and release to stop. End of Track Plug Plug Control Tower Hint: For best performance, use this toy on a smooth, flat surface. We do not recommend [...]

11 Mode I - Beginner Driver • Note the grooves on the edges of the crash gate, the ring of fire ramp and the dirt track. • Fit the grooves on these three obstacles onto the flexible track. Place the obstacles anywhere you like, but be sure to keep them on the outside of the track , as shown. Hint: For best performance, space the obstacles equal[...]

• Slide the mode switch on top of the car to I for beginner driver mode. • Locate the speed control switch on the bottom of the car. • Slide the switch to either slow speed or fast speed . Hint: We recommend slow speed for first time drivers. • Press the ON/OFF button on top of the car to turn the car on. The car button lights up. The car i[...]

13 Mode I - Beginner Driver • Place rear wheels of the car on the starting ramp, making sure the car is pointing in the same direction as the arrows . The car should move around the track counter-clockwise. Listen to the engine revving. Arrows • Note the arrows on the starting ramp. W ARNING T o pre vent entanglement, k eep hair a wa y from whe[...]

14 Mode I - Beginner Driver • Press the forward button on the remote controller. The car moves around the track, hugging all the way without steering! Hint: The car only travels forward in Mode I - Beginner Driver. The reverse button and the steering wheel also do not work on the remote controller. • You will hear racing sound effects from the [...]

15 Speed Control Switch ON/OFF Button • Slide the switch on the top of the car to II for pro driver mode. • Locate the speed control switch on the bottom of the car. • Slide the switch to either slow speed or fast speed . • Press the ON/OFF button on top of the car to turn the car on. The car button lights up. The car is now ready to receiv[...]

Reset Switch 16 Mode II - Pr o Driver • Press the forward button on the remote controller.The car moves forward. • Press the reverse button on the remote controller. The car moves backward. • Use the wheel on the remote controller to maneuver around the track or past obstacles. Note: The range of the remote controller to the car is 15 feet (w[...]

17 5 • Fit the dirt track to the crash gate as shown. Dirt Track Crash Gate • Slide the track over the starting ramp. 4 • Fold up the track, as shown. 3 Stor age • Remove the flexible track from both sides of the control tower. • Lift the control tower storage compartment door. • Place the barrels, cones, and hay bales (as shown) into t[...]

18 • Fold the ring of fire down onto the ramp. • Fit the ring of fire ramp onto the dirt track as shown. 7 Stor age • Slide the edges of the dirt track into the grooves in the handle support and control tower. 6 Ring of Fire Ramp Dirt Track Control Tower • Fit the stadium lights onto the track as shown. 9 • Attach the car to the hook on t[...]

19 • Keep the car tires clean for best performance. • Wipe this toy with a clean cloth dampened with a mild soap and water solution. Do not immerse this toy. • This toy has no consumer serviceable parts. Do not take this toy apart. • Do not drop this toy on a hard surface. Car e • Fit the two flags into the holes in the dirt track as show[...]

20 Adjusting Y our Car’ s Wheel Alignment • Turn the car over and locate the small screw hole near front wheel on the driver’s side. Screw Hole 1 3 If in Mode II your car is not driving in a str aight path on smooth surfaces, follow these instructions. Car Pulls to the Left If your car is pulling to the left: • Insert the small jeweler’s [...]

21 T r oubleshooting Guide Car moves very slowly • Battery power in the car may be weak. Replace all four batteries with fresh, alkaline batteries. • The wheels may be dirty. Wipe them with a clean cloth dampened with a mild soap and water solution. Symptom Solution Car responds intermittently to the remote controller In Mode I , the car runs c[...]

22 T r oubleshooting Guide • The control tower power may be turned off. Make sure the reset button is in the on ● position. Press the ON/OFF button again. • The control tower may have turned off automatically and the ON/OFF button will no longer be lit. Press ON/OFF button on the control tower to turn it on again. The button should light up. [...]

23 FCC Note (United States Only) Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio freq[...]

Consumer Information Questions? We'd like to hear from you! Call Fisher-Price ® Consumer Relations, toll-free at 1-800-432-5437 , 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call 1-800-382-7470. Or, write to: Fisher-Price ® Consumer Relations, 636 Girard Avenue, East Aurora, New York 1405[...]