Ir para a página of
Manuais similares
-
Automobile
Ford 2010 Escape
345 páginas 2.79 mb -
Automobile
Ford 2010 Flex
397 páginas 2.57 mb -
Automobile
Ford 2004 Mustang
16 páginas 0.12 mb -
Automobile
Ford 2006 Five Hundred
272 páginas 2.37 mb -
Automobile
Ford 2009 Taurus X
2 páginas 1.09 mb -
Automobile
Ford 5G1J-19G217-AA
12 páginas 1.03 mb -
Automobile
Ford F-350
27 páginas 0.78 mb -
Automobile
Ford 2011 Fusion Hybrid
345 páginas 2.39 mb
Bom manual de uso
As regras impõem ao revendedor a obrigação de fornecer ao comprador o manual com o produto Ford 2011 Fiesta. A falta de manual ou informações incorretas fornecidas ao consumidor são a base de uma queixa por não conformidade do produto com o contrato. De acordo com a lei, pode anexar o manual em uma outra forma de que em papel, o que é frequentemente utilizado, anexando uma forma gráfica ou manual electrónicoFord 2011 Fiesta vídeos instrutivos para os usuários. A condição é uma forma legível e compreensível.
O que é a instrução?
A palavra vem do latim "Instructio" ou instruir. Portanto, no manual Ford 2011 Fiesta você pode encontrar uma descrição das fases do processo. O objetivo do manual é instruir, facilitar o arranque, a utilização do equipamento ou a execução de determinadas tarefas. O manual é uma coleção de informações sobre o objeto / serviço, um guia.
Infelizmente, pequenos usuários tomam o tempo para ler o manual Ford 2011 Fiesta, e um bom manual não só permite conhecer uma série de funcionalidades adicionais do dispositivo, mas evita a formação da maioria das falhas.
Então, o que deve conter o manual perfeito?
Primeiro, o manual Ford 2011 Fiesta deve conte:
- dados técnicos do dispositivo Ford 2011 Fiesta
- nome do fabricante e ano de fabricação do dispositivo Ford 2011 Fiesta
- instruções de utilização, regulação e manutenção do dispositivo Ford 2011 Fiesta
- sinais de segurança e certificados que comprovam a conformidade com as normas pertinentes
Por que você não ler manuais?
Normalmente, isso é devido à falta de tempo e à certeza quanto à funcionalidade específica do dispositivo adquirido. Infelizmente, a mesma ligação e o arranque Ford 2011 Fiesta não são suficientes. O manual contém uma série de orientações sobre funcionalidades específicas, a segurança, os métodos de manutenção (mesmo sobre produtos que devem ser usados), possíveis defeitos Ford 2011 Fiesta e formas de resolver problemas comuns durante o uso. No final, no manual podemos encontrar as coordenadas do serviço Ford na ausência da eficácia das soluções propostas. Atualmente, muito apreciados são manuais na forma de animações interessantes e vídeos de instrução que de uma forma melhor do que o o folheto falam ao usuário. Este tipo de manual é a chance que o usuário percorrer todo o vídeo instrutivo, sem ignorar especificações e descrições técnicas complicadas Ford 2011 Fiesta, como para a versão papel.
Por que ler manuais?
Primeiro de tudo, contem a resposta sobre a construção, as possibilidades do dispositivo Ford 2011 Fiesta, uso dos acessórios individuais e uma gama de informações para desfrutar plenamente todos os recursos e facilidades.
Após a compra bem sucedida de um equipamento / dispositivo, é bom ter um momento para se familiarizar com cada parte do manual Ford 2011 Fiesta. Atualmente, são cuidadosamente preparados e traduzidos para sejam não só compreensíveis para os usuários, mas para cumprir a sua função básica de informação
Índice do manual
-
Página 1
Introduction 4 Instrument Cluster 12 W arning lights and chimes 12 Gauges 17 T rip computer 17 Message center 18 Multifunction display 19 Entertainment Systems 24 AM/FM stereo with CD 24 Auxiliary input jack (Line in) 31 USB port 33 Satellite radio information 36 SYNC 威 39 SYNC 威 voice recognition feature 41 SYNC 威 phone features 47 Pairing y[...]
-
Página 2
Locks and Security 130 Keys 130 Locks 131 Anti-theft system 142 Seating and Safety Restraints 145 Seating 145 Safety restraints 151 Airbags 165 Child restraints 180 Tires, Wheels and Loading 199 T ire information 199 T ire inflation 201 T ire Pressure Monitoring System (TPMS) 214 V ehicle loading 219 T railer towing 225 Recreational towing 225 Driv[...]
-
Página 3
Customer Assistance 272 Reporting safety defects (U.S. only) 279 Reporting safety defects (Canada only) 279 Cleaning 280 Maintenance and Specifications 288 Engine compartment 290 Engine oil 292 Battery 294 Engine coolant 296 Fuel information 301 Air filter(s) 314 Part numbers 317 Maintenance product specifications and capacities 318 Engine data 321[...]
-
Página 4
CONGRATULATIONS Congratulations on acquiring your new Ford Motor Company product. Please take the time to get well acquainted with your vehicle by reading this handbook. The more you know and understand about your vehicle, the greater the safety and pleasure you will derive from driving it. For more information on Ford Motor Company and its product[...]
-
Página 5
Protecting the environment W e must all play our part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps towards this aim. Information in this respect is highlighted in this guide with the tree symbol. CALIFORNIA Proposition 65 W arning W ARNING: Engine[...]
-
Página 6
SPECIAL NOTICES New V ehicle Limited W arranty For a detailed description of what is covered and what is not covered by your vehicle’ s New V ehicle Limited W arranty , refer to the Warranty Guide that is provided to you along with your Owner’ s Guide. Special instructions For your added safety , your vehicle is fitted with sophisticated electr[...]
-
Página 7
Event Data Recording This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle; this data will assist in understanding how a vehicle’ s systems performed. The EDR is designed to record data related to [...]
-
Página 8
Note: Including to the extent that any law pertaining to Event Data Recorders applies to SYNC 威 or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911 Assist may , through any paired and connected cell phone, disclose to emergency services that the vehicle has been in a crash involving the deployment of[...]
-
Página 9
CELL PHONE USE The use of Mobile Communications Equipment has become increasingly important in the conduct of business and personal affairs. However , drivers must not compromise their own or others’ safety when using such equipment. Mobile Communications can enhance personal safety and security when appropriately used, particularly in emergency [...]
-
Página 10
These are some of the symbols you may see on your vehicle. V ehicle Symbol Glossary Safety Alert See Owner’ s Guide Fasten Safety Belt Airbag - Front Airbag - Side Child Seat Lower Anchor Child Seat T ether Anchor Brake System Anti-Lock Brake System Parking Brake System Brake Fluid - Non-Petroleum Based Parking Aid System Stability Control System[...]
-
Página 11
V ehicle Symbol Glossary Power W indows Front/Rear Power W indow Lockout Child Safety Door Lock/Unlock Interior Luggage Compartment Release Panic Alarm Engine Oil Engine Coolant Engine Coolant T emperature Do Not Open When Hot Battery A void Smoking, Flames, or Sparks Battery Acid Explosive Gas Fan W arning Power Steering Fluid Maintain Correct Flu[...]
-
Página 12
W ARNING LIGHTS AND CHIMES W arning lights can alert you to a vehicle condition that may become serious enough to cause expensive repairs. A warning light may illuminate when a problem exists with one of your vehicle’ s functions. Many lights will illuminate when you start your vehicle to make sure the bulb works. If any light remains on after st[...]
-
Página 13
W ARNING: Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter , the fuel system, interior floor coverings or other vehicle components, possibly causing a fire. Low fuel: Displays when the fuel level in the fuel tank is at or near empty (refer to Fuel gauge in this chapter). Powertrain malfunction/Red[...]
-
Página 14
Anti-lock brake system: If the ABS light stays illuminated or continues to flash, a malfunction has been detected, have the system serviced immediately by your authorized dealer . Normal braking is still functional unless the brake warning light also is illuminated. Airbag readiness: If this light fails to illuminate when the ignition is turned to [...]
-
Página 15
Engine coolant temperature: Illuminates when the engine coolant temperature is high. Stop the vehicle as soon as possible, switch off the engine and let cool. Refer to Engine coolant in the Maintenance and Specifications chapter . W ARNING: Never remove the coolant reservoir cap while the engine is running or hot. Low tire pressure warning: Illumin[...]
-
Página 16
AdvanceT rac 威 /T raction control (if equipped): Displays when the AdvanceT rac 威 /T raction control is active. If the light remains on, have the system serviced immediately , refer to the Driving chapter for more information. Speed control (if equipped): Illuminates when the speed control system is in use. Anti-theft system: Flashes when the S[...]
-
Página 17
GAUGES Shown in standard measure. Metric similar . 1. T achometer: Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer continuously at the top of the scale may damage the engine. Refer to Filling the tank in the Maintenance and Specifications chapter for more information. 2. Speedometer: Indicates the current [...]
-
Página 18
XXX mls — T rip odometer: Registers the mileage of individual journeys. XXX mls — Distance to empty: Indicates the approximate distance the vehicle will travel on the fuel remaining in the tank. Changes in driving pattern may cause the value to vary . XXX mpg ( l/100km)—A verage fuel consumption: Indicates the average fuel consumption since t[...]
-
Página 19
• Clock: Select Clock then move right to enter the menu. Scroll up or down to select from to select from: The clock can also be set through the audio system. See Audio systems in the Entertainment Systems chapter for more information. • Set time: Move right to enter the menu and adjust the time. • Set date: Move right to enter the menu and ad[...]
-
Página 20
Message W arning Lamp at Instrument Cluster System INTERIOR SCAN DEACTIV A TED — Anti-theft security system IMMOBILIZER MALFUNCTION SER VICE NOW — Anti-theft security system ALARM TRIGGERED CHECK VEHICLE — Anti-theft security system LEFT/RIGHT INDICA TOR MALFUNCTION CHANGE BULB — Lights HILL ST AR T ASSIST NOT A V AILABLE T ransmission STEE[...]
-
Página 21
Message W arning Lamp at Instrument Cluster System KEY BA TTER Y LOW REPLACE BA TTER Y — Passive entry/passive start system TO ST AR T PRESS BRAKE — Passive Entry/Passive Start CLOSE TRUNK OR USE SP ARE KEY — T runk TO ST AR T PRESS CLUTCH — Passive Entry/Passive Start ENGINE MALFUNCTION SER VICE NOW Engine TRANSMISSION MALFUNCTION SER VICE[...]
-
Página 22
Message W arning Lamp at Instrument Cluster System VEHICLE NOT IN P ARK SELECT P — Starting/T ransmission VEHICLE NOT IN P ARK SELECT P — Starting/T ransmission DOOR OPEN APPL Y BRAKE — Doors X DOOR OPEN Doors TRUNK OPEN Doors HOOD OPEN Hood AIRBAG MALFUNCTION SER VICE NOW Airbag TCS OFF T raction control system TCS MALFUNCTION NEXT SER VICE [...]
-
Página 23
Oil life monitoring system reset T o reset the oil service light and clear the oil change message after servicing use the following procedure: 1. W ith the ignition in the off position, press the brake and accelerator pedals. 2. T urn the key to the accessory position for keyed vehicles and for push button start vehicles press the Start/Stop button[...]
-
Página 24
AUDIO SYSTEMS AM/FM stereo or AM/FM stereo single CD/MP3 (if equipped) W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Y our primary responsibility is the safe operation o[...]
-
Página 25
3. INFO: Press to access any available radio or CD information. 4. Sound menu: Press to access T reble, Bass, Middle, Fade (if equipped) and Balance menu options. Use / to cycle through the various options. When the desired option is chosen, press / to increase or decrease the levels. Press OK to set or press MENU to exit. 5. Memory presets: : T o [...]
-
Página 26
• CD (if equipped): Scroll to select CD options and then move right to enter the menu. Scroll to select from the following. Note: CD must be the selected audio source for this option to appear in the menu. • Normal mode: Scroll to select Normal Mode and press OK. • Repeat: Press OK to Repeat the current song. For MP3 discs, you can select fro[...]
-
Página 27
Autostore feature: The autostore feature allows you to store the six strongest local stations available from the AM and FM frequency bands. T o use, select AST . The display will read ‘Hold to start autostore’. Continue holding the button until ‘Autostoring’ appears in the display . When the search is complete, the sound will return and the[...]
-
Página 28
W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Y our primary responsibility is the safe operation of the vehicle. W e recommend against the use of any handheld device whi[...]
-
Página 29
• Adaptive volume: Scroll to select Adaptive volume and move right to enter the menu. Adaptive volume automatically adjusts the system’ s volume to compensate for speed and wind noise. Y ou can set the system between off and +7. • Sound: Scroll to select Sound and move right to enter the menu. Scroll to select from T reble, Bass, Middle, Fade[...]
-
Página 30
10. AUX Press to access LINE IN (auxiliary input jack) mode or SYNC 威 media mode. 11. SIRIUS Press repeatedly to access SA T1, SA T2 and SA T3 satellite radio modes (if equipped). 12. RADIO: Press repeatedly to select AM1/AM2AST/FM1/FM2AST frequency bands. Y ou can also press RADIO to return to the radio base screen when browsing. Autostore featu[...]
-
Página 31
17–20 Soft keys: Press these soft keys to access the corresponding functions on the screen. Auxiliary input jack (Line in) W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road[...]
-
Página 32
The auxiliary input jack (AIJ) provides a way to connect your portable music player to the in-vehicle audio system. This allows the audio from a portable music player to be played through the vehicle speakers with high fidelity . T o achieve optimal performance, please observe the following instructions when attaching your portable music device to [...]
-
Página 33
W ARNING: Store the portable music player in a secure location, such as the center console or the glove box, when the vehicle is in motion. Hard objects may become projectiles in a collision or sudden stop, which may increase the risk of serious injury . The audio extension cable must be long enough to allow the portable music player to be safely s[...]
-
Página 34
• T errain: Hills, mountains, tall buildings, power lines, electric fences, traffic lights and thunderstorms can interfere with your reception. • Station overload: When you pass a broadcast tower , a stronger signal may overtake a weaker one and play while the weak station frequency is displayed. CD/CD player care Do: • Handle discs by their [...]
-
Página 35
CDs with homemade paper (adhesive) labels should not be inserted into the CD player as the label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ballpoint pens may damage CDs. Please contact your authorized dealer for further information. Audio[...]
-
Página 36
Sample MP3 structure If you are burning your own MP3 discs, it is important to understand how the system will read the structures you create. While various files may be present, (files with extensions other than mp3), only files with the .mp3 extension will be played. Other files will be ignored by the system. This enables you to use the same MP3 d[...]
-
Página 37
• T errain: Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception. • Station overload: When you pass a ground based broadcast repeating tower , a stronger signal may overtake a weaker one and result in an audio mute. Unlike AM/FM audible st[...]
-
Página 38
Radio Display Condition Action Required ACQUIRING Radio requires more than two seconds to produce audio for the selected channel. No action required. This message should disappear shortly . SA T F AUL T Internal module or system failure present. If this message does not clear within a short period of time, or with an ignition key cycle, your receiv[...]
-
Página 39
Radio Display Condition Action Required NO TEXT Song title information not available. Song title information not available at this time on this channel. The system is working properly . NO TEXT Category information not available. Category information not available at this time on this channel. The system is working properly . NO SIGNAL Loss of sign[...]
-
Página 40
W elcome to the new world of ingenuity and passion - technology that is both fun and functional. W elcome to SYNC 威 . For more information, please visit www .SyncMyRide.com. EXPORT UNIQUE (NON-UNITED STATES/CANADA) INFORMATION For your particular global region, your vehicle may be equipped with features and options that are different from the fea[...]
-
Página 41
SYNC 威 . In addition, if you connect a media device, SYNC 威 creates and retains an index of media content supported by SYNC 威 . SYNC 威 also records a short development log of approximately 10 minutes of all recent SYNC 威 activity . The log profile and other SYNC 威 data may be used to improve SYNC 威 and help diagnose any problems that [...]
-
Página 42
“speaking” certain commands to the system. The system will respond with a series of audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of dialogue interaction. Feedback through audible tones Y our VR system will respond through various audible tones. Y ou may hear a tone at the following t[...]
-
Página 43
Clarification through candidate lists Candidate lists are created when the system has several possible options of similar level of confidence as a result of your request. The system will submit back to you as many as four possibilities for your clarification. This may happen either with your phone book and/or music selections. Example #1: Y ou want[...]
-
Página 44
• At any time, you can interrupt the system while it is speaking by pressing . The system will respond with a listening tone and allow you to speak a command. • Speak naturally without large pauses in between words. At any time, you may say these commands: • USB • SYNC • Bluetooth Audio • Line in • Phone • V oice settings • Cancel[...]
-
Página 45
At any time, while in voice settings, you may say these commands to adjust the voice settings: • Interaction mode advanced • Interaction mode standard • Confirmation prompts on • Confirmation prompts off • Media candidate lists on • Media candidate lists off • Phone candidate lists on • Phone candidate lists off Interaction mode sta[...]
-
Página 46
Radio control Steering wheel / stalk control Function PHONE Press to activate SYNC 威 hands-free calling or to answer an incoming call. When in phone mode, press to send a call, text message, to put a call on hold and answer another call, or to initiate a multi-party call. Press and hold to end a call. Press and hold to cancel a call to emergency [...]
-
Página 47
Radio control Steering wheel / stalk control Function MENU N/A Press while in an active call to access SYNC 威 active call options. Refer to Active call menu options in the SYNC 威 phone features section Press while in media to access SYNC 威 MEDIA MENU. Refer to the SYNC 威 media features section for further information. AUX N/A Press repeated[...]
-
Página 48
• Call history outgoing 1 • Call history incoming 1 • Phone book <name> on Other 1 • Connections 1 • Call history missed 1 • Go to privacy • Menu 1 • Hold • Join 1 V oice commands are not available until downloading phone information via Bluetooth is complete. Phone book commands: When you ask SYNC 威 to access a phone book[...]
-
Página 49
V oice commands when connecting devices When attempting to connect a phone to SYNC 威 , you may say any of the following commands: • Connect <device name> • Bluetooth ON • Bluetooth OFF • Delete <device name> Note: Y ou can only connect a device to SYNC 威 after it has successfully gone through the pairing process. Note: In th[...]
-
Página 50
• Route summary • Cancel route • Update route • V oice guidance ON • V oice guidance OFF • Guidance display on/off (late availability , if equipped)* * Note: These voice commands are only available on vehicles that have a center integrated display . Pairing your phone for the first time Note: For your safety , this procedure cannot be c[...]
-
Página 51
Making a call Making a hands-free phone call using SYNC 威 is easy . 1. Press . 2. When prompted, say , “Call <name>” or say the desired number and then say “Dial”. T o erase the last spoken digit, say “Delete”. T o erase all spoken digits, say “Clear”. 3. Once the desired number/contact is on the screen, either say “Call?[...]
-
Página 52
If your Bluetooth enabled phone is connected and supports downloading text messages via Bluetooth , you can receive incoming text messages. When you are being sent a text message, an audible tone will sound and the display will indicate that you have a new message. Y ou can say “Read Message” and SYNC 威 will read the message to you. Note: T o[...]
-
Página 53
Using privacy mode SYNC 威 allows you to easily switch a call from an active hands-free environment to your Bluetooth enabled cellular phone for a more private conversation. T o turn privacy mode on/off: Note: T o scroll, press / . 1. Press MENU. The radio display will read Active Call Menu . 2. Scroll repeatedly until Privacy appears in the radio[...]
-
Página 54
Joining two calls (multiparty /conference call) T o join two separate calls and speak to both through SYNC 威 : Note: T o scroll, press / . 1. When on an active call, press PHONE. This will put your first call on hold. 2. Place the second call by accessing the contact information through SYNC 威 or by using voice recognition and saying the contac[...]
-
Página 55
Press or PHONE to access the following items when you are not in an active call: Phone Menu Note: Phone Menu will appear briefly to indicate that you are in the Phone Menu . • Phone Redial • 911 Assist ™ (if equipped) • Call History • V ehicle Health (if equipped, U.S. only) • Phonebook • Applications (if available) • T ext Message [...]
-
Página 56
5. Press OK or PHONE to call the desired selection. Note: SYNC 威 will attempt to automatically re-download your phone book/call history each time your phone connects to SYNC 威 (if the auto download feature is on and if your Bluetooth enabled cellular phone supports this feature). Accessing your phone book Note: This is a phone dependent feature[...]
-
Página 57
T o access the text messaging menu: Note: T o scroll, press / . 1. Press PHONE to enter Phone Menu . 2. Scroll until T ext Message is selected and press OK. If SYNC 威 detects that your Bluetooth enabled cellular phone does not support downloading text messaging via Bluetooth , Unsupported will appear in the radio display and SYNC 威 will return [...]
-
Página 58
• Call you later • Be there i n 10 minutes • Be there in 20 minutes • Ye s • No • Why? • Thanks • Where R you? • I need more directions • I love you • T oo funny • Can’ t wait to see you • I’m stuck in traffic 6. When the desired choice is selected, press OK. 7. Now select to whom you would like to send the message by [...]
-
Página 59
Deleting all your text messages Y ou can delete all your current text messages from SYNC 威 . Note: This will not delete messages from your Bluetooth enabled cellular phone. Note: T o scroll, press / . 1. Press PHONE to enter Phone Menu . 2. Scroll until T ext Message is selected and press OK. The display will indicate the number of messages in yo[...]
-
Página 60
1. Press PHONE to access the Phone Menu . 2. Scroll until Phone Settings is selected and press OK. 3. Scroll until Phone Status is selected and press OK. 4. Scroll to view the paired phone’ s name, signal level, battery level and roaming status. After viewing any of these selections, press the Exit soft key to return to the Phone Status menu. Set[...]
-
Página 61
SYNC 威 allows you to modify the contents of your downloaded phone book (i.e. adding/deleting contacts). T o access: Note: T o scroll, press / . 1. Press PHONE to enter Phone Menu . 2. Scroll until Phone Settings is selected and press OK. 3. Scroll until Modify Phonebook is selected and press OK. 4. Scroll to cycle through contact(s): • Add Cont[...]
-
Página 62
Note: T o scroll, press / . 1. Press PHONE to access the Phone Menu . 2. Scroll until Phone Settings is selected and press OK. 3. Scroll until Auto Download is selected and press OK. 4. When Auto Download On? appears, press OK. Auto Download set to on will appear and your phone book will be automatically downloaded each time your Bluetooth enabled [...]
-
Página 63
T o connect using the phone menu: 1. Press PHONE to enter Phone Menu . 2. Scroll until Services is selected and press OK. 3. Scroll until Connect is selected and press OK. SYNC 威 will initiate the call to the services portal. 4. Once connected, follow the voice prompts to request your desired Service such as T raffic or Directions. Y ou can also [...]
-
Página 64
• Update route: Downloads an updated route to your destination. • V oice guidance on/off: When voice guidance is set to on, the system will provide spoken directions and a visual display of the directions. When voice guidance is turned off, the system will provide turn-by-turn tones and a visual display of the directions without spoken guidance[...]
-
Página 65
Note: When you connect to T raffic, Directions and Information, the service uses GPS technology and advanced vehicle sensors to collect the vehicle’ s current location, travel direction and speed to help provide you with the directions, traffic reports, or business searches you request. Further , to provide the services you request and for contin[...]
-
Página 66
Airbags generally deploy in certain frontal, near frontal, side and rollover crashes, and the deployment of any airbag is intended to act as a 911 Assist™ trigger if those events occur . For more information about airbag deployment, see the Seating and Safety Restraints chapter of your Owner Guide. The fuel pump shut-off, in certain vehicles, is [...]
-
Página 67
window of time (approximately 10 seconds) that allows the driver or passenger to decide whether to cancel the call by pressing and holding or PHONE on the steering wheel controls or on the audio system. Before initiating the 911 call for the occupants, SYNC 威 will say the following or a similar message: “SYNC 威 will attempt to call 911. If yo[...]
-
Página 68
The 911 Assist™ feature is initially set to OFF . T o access the setting: 1. Press PHONE to enter Phone Menu . 2. Scroll until 911 Assist is selected and press OK. 3. Press or to toggle between On and Off selections. 4. Press OK when the desired option appears in the display . Note: Off selections include: Off with reminder and Off without remind[...]
-
Página 69
VEHICLE HEAL TH REPOR T PRIV ACY NOTICE: When you run a V ehicle Health Report, Ford Motor Company may collect your cell phone number (to process your report request) and diagnostic information about your vehicle. Certain versions or updates to V ehicle Health Report may also collect additional vehicle information. Ford may use the vehicle informat[...]
-
Página 70
1. Press PHONE to enter Phone Menu . 2. Scroll until V ehicle Health is selected and press OK. 3. When User Preferences is selected, press OK. 4. Scroll until Automatic Reports is selected and press OK. 5. Scroll to select the desired setting Automatic Reports On/Off? is chosen and press OK. Mileage interval (if equipped, U.S. only) Once you have t[...]
-
Página 71
2. Scroll until System Settings is selected and press OK. 3. Scroll to select Bluetooth Devices and press OK to access: • Add Bluetooth Device • Delete Device • Connect Bluetooth Device • Delete All Devices • Set Primary Phone • Return • Set Bluetooth On/Off Scroll to select Advanced and press OK to access: • Prompts • Languages ?[...]
-
Página 72
9. Scroll to toggle between Ye s ? and NO?. When the appropriate response is in the display , press OK. If you choose Ye s , Primary Set will appear in the radio display . If you choose NO? , the system will confirm that the phone was not set as the primary . 10. If you selected this as your primary phone, SYNC 威 may ask if you would like to down[...]
-
Página 73
SYNC 威 will now attempt to connect to this primary Bluetooth enabled phone with each connection cycle. Note: When a phone is selected as primary , it will appear first in the list and also be marked with an * . Bluetooth on/off T o turn the Bluetooth feature on SYNC 威 on/off: Note: T o scroll, press / . 1. Press PHONE to enter Phone Menu . 2. S[...]
-
Página 74
Turning prompts on/of f Prompts from SYNC 威 can help guide you via questions, helpful hints or ask you for a specific action. T o turn prompts on/off: Note: T o scroll, press / . 1. Press PHONE to enter the Phone Menu . 2. Scroll until System Settings is selected and press OK. 3. Scroll until Advanced is selected and press OK. 4. Scroll until Pro[...]
-
Página 75
1. Press PHONE to enter Phone Menu . 2. Scroll until System Settings is selected and press OK. 3. Scroll until Advanced is selected and press OK. 4. Scroll until Factory Defaults is selected and press OK. 5. Restore Defaults? will appear . Press OK to confirm. The display will read Defaults Set. SYNC 威 will take you back to the Factory Defaults m[...]
-
Página 76
V oice commands in media mode W ARNING: Driving while distracted can result in loss of vehicle control, accident and injury . Ford strongly recommends that drivers use extreme caution when using any device or feature that may take their focus off the road. Y our primary responsibility is the safe operation of the vehicle. W e recommend against the [...]
-
Página 77
Search/Play Genre: Y ou can search for and play a specific genre (type) of music. SYNC 威 will search all the data from your indexed music and, if available, will begin to play that type of music. Note: Y ou can only play genres of music which are present in the GENRE metadata tags that you have on your digital media player . Similar music: Y ou c[...]
-
Página 78
At any time, you may say these commands: • SYNC • USB • Help • Bluetooth Audio • Line in • Phone • V oice settings • Read Message • Cancel Connecting a digital media player to SYNC 姞 via the USB port Note: If your digital media player has an on/off switch, ensure that the device is on. 1. Plug the device into the vehicle’ s US[...]
-
Página 79
What’s playing? At any time while a track is playing, you can press or VOICE and say , “What’ s playing?”. SYNC 威 will read the metadata tags of the playing track to you (if populated). Using your media menu The Select Source menu allows you to select from various possible SYNC 威 media sources, such as: SYNC USB, Bluetooth Audio or SYNC[...]
-
Página 80
• Bluetooth Audio Note: This is a device dependent feature. • SYNC Line In • Return Accessing and using your USB port Y ou can use the USB port to plug in and access media devices as well as charge devices (if supported by your device). For a list of compatible media players, refer to www .SyncMyRide.com. Note: Since your USB port allows you [...]
-
Página 81
Streaming music from your Bluetooth enabled phone Note: This is a phone dependent feature. Refer to your phone’ s user guide for further information on how to stream Bluetooth audio. SYNC 威 allows you to stream music from your Bluetooth enabled cellular phone to play through SYNC 威 . T o access: Note: T o scroll, press / . 1. Ensure that the [...]
-
Página 82
Using the media settings in media menu SYNC 威 allows you to change the way you listen to your playing media. Through the media settings menu, you can access Shuffle, Repeat and Autoplay . T o access these settings: Note: T o scroll, press / . 1. Press AUX repeatedly until SYNC 威 appears. 2. Press MENU. When Media Player Menu is selected, press [...]
-
Página 83
2. Press MENU. When Media Player Menu is selected, press OK. 3. Scroll until System Settings is selected and press OK 4. When Bluetooth Devices is selected, press OK to select from: • Add Bluetooth Device • Delete Device • Connect Bluetooth Device • Delete All Devices • Set Bluetooth On/Off • Return 5. When Advanced is selected, press O[...]
-
Página 84
Adding a Bluetooth media device which is in discoverable mode Note: This is a speed dependent feature. Y our vehicle must be moving less than 3 mph (5 km/h) to use this feature. Note: If your phone supports streaming Bluetooth audio and has already been paired with SYNC 威 as a phone, you do not have to go through the pairing process again. Note: [...]
-
Página 85
5. Scroll until Add Bluetooth Device is selected and press OK. 6. Select the desired device and press OK to connect to the device. Bluetooth on/off T o turn the Bluetooth feature on SYNC 威 on/off: Note: T o scroll, press / . 1. Press AUX repeatedly until SYNC appears. 2. Press MENU. When Media Player Menu is selected, press OK. 3. Scroll until Sy[...]
-
Página 86
Turning prompts on/of f Prompts from SYNC 威 can help guide you via questions, helpful hints or ask you for a specific action. T o turn prompts on/off: Note: T o scroll, press / . 1. Press AUX repeatedly until SYNC appears. 2. Press MENU. When Media Player Menu is selected, press OK. 3. Scroll until System Settings is selected and press OK. 4. Scr[...]
-
Página 87
Note: T o scroll, press / . 1. Press AUX repeatedly until SYNC appears. 2. Press MENU. When Media Player Menu is selected, press OK. 3. Scroll until System Settings is selected and press OK. 4. Scroll until Advanced is selected and press OK. 5. Scroll until Factory Defaults is selected and press OK. 6. When the system asks if you would like to rest[...]
-
Página 88
W ARNING: SYNC 威 PLA Y MENU manual control is a backup interface to voice commands. Do not use SYNC 威 PLA Y MENU manual control while driving. Note: The Play Menu is only available for indexable media through the USB port. This is not available for LINE IN and BT AUDIO. SYNC 威 is able to organize and sort your indexed media from your playing [...]
-
Página 89
Using the Play all feature The Play all feature in SYNC 威 will play all indexed media (tracks) from your playing device in flat file mode, one at a time in numerical order . T o use this feature: Note: T o scroll, press / . 1. Ensure that your playing device is plugged into the USB port and is ON. 2. Press AUX repeatedly until SYNC USB appears. 3[...]
-
Página 90
8. Press OK to confirm and begin to play the first track of the selected album. Refer to Using the media settings in your media menu earlier in this chapter for further information on making adjustments to your music (i.e., Seek, Shuffle, Autoplay and Repeat). Selecting and playing specific albums SYNC 威 allows you view and play indexed media by [...]
-
Página 91
Selecting from different genres SYNC 威 allows you to sort indexed music by genre (category) type. SYNC 威 will automatically categorize your indexed music according to the available genres. If you have fewer than 255 indexed genres, SYNC 威 will list them alphabetically in flat file mode. If there are more than 255 indexed genres, SYNC 威 will[...]
-
Página 92
1. Ensure that your playing device is plugged into the USB port and is ON. 2. Press AUX repeatedly until SYNC USB appears. 3. Press MENU. When Media Player Menu is selected, press OK. 4. Scroll until Play Menu is selected, press OK. 5. When Play All appears, scroll until Playlists is selected and press OK. 6. Scroll to cycle through all indexed pla[...]
-
Página 93
Note: When searching through various folders, you will only be able to view media content which is compatible with SYNC 威 . Y ou may have other files saved with various extensions, power point presentations for example, but they will not be visible. T o access: Note: T o scroll, press / . 1. Ensure that your playing device is plugged into the USB[...]
-
Página 94
2. Ensure that you are listening to an indexed track. 3. Press AUX repeatedly until SYNC USB appears. 4. Press MENU. When Media Player Menu is selected, press OK. 5. Scroll until Play Menu is selected and press OK. 6. When Play All appears in the display , scroll until SIMILAR is selected and press OK. The system will create a new list of similar s[...]
-
Página 95
Indexing: A process in which SYNC 威 builds a voice recognition grammar for the media content of your digital media player . While indexing, SYNC 威 will play already indexed media if Autoplay is on. However , voice recognition is not available for the media until the indexing process is complete. Metadata: Descriptive tags embedded in your digit[...]
-
Página 96
services of third party origin, as well as associated media, printed materials, and “online” or electronic documentation (“THRID P ARTY SOFTW ARE”) are protected by international intellectual property laws and treaties. The THIRD P ARTY SOFTW ARE is licensed, not sold. All rights reserved. • The MS SOFTW ARE, FORD SOFTW ARE and THIRD P AR[...]
-
Página 97
• SOFTW ARE T ransfer: Y ou may permanently transfer your rights under this EULA only as part of a sale or transfer of the DEVICE, provided you retain no copies, you transfer all of the SOFTW ARE (including all component parts, the media and printed materials, any upgrades, and, if applicable, the Certificate(s) of Authenticity), and the recipien[...]
-
Página 98
• Internet-Based Services Components: The SOFTW ARE may contain components that enable and facilitate the use of certain Internet-based services. Y ou acknowledge and agree that MS, Microsoft Corporation, FORD MOTOR COMP ANY , third party software and service suppliers, their affiliates and/or their designated agent may automatically check the ve[...]
-
Página 99
• Obligation to Drive Responsibly: Y ou recognize your obligation to drive responsibly and keep attention on the road. Y ou will read and abide with the DEVICE operating instructions particularly as they pertain to safety and assumes any risk associated with the use of the DEVICE. UPGRADES AND RECOVER Y MEDIA: If the SOFTW ARE is provided by FORD[...]
-
Página 100
PRODUCT SUPPOR T : Product support for the SOFTW ARE is not provided by MS, its parent corporation Microsoft Corporation, or their affiliates or subsidiaries. For product support, please refer to FORD MOTOR COMP ANY instructions provided in the documentation for the DEVICE. Should you have any questions concerning this EULA, or if you desire to con[...]
-
Página 101
W ARNING: Operating certain parts of this system while driving can distract your attention away from the road, and possibly cause an accident or other serious consequences. Do not change system settings or enter data non-verbally (using your hands) while driving. Stop the vehicle in a safe and legal manner before attempting these operations. This i[...]
-
Página 102
MANUAL HEATING AND AIR CONDITIONING SYSTEM Manual system with A/C shown; heater only system similar . 1. : T urn to select the desired fan speed. 2. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control setting: MAX A/C (if equipped): Distributes recirculated air through[...]
-
Página 103
: Distributes outside air through the windshield defroster and demister vents. Can be used to clear thin ice or fog from the windshield. The system will automatically provide outside air to reduce window fogging. T o exit select another mode. 3. T emperature: Controls the temperature of the airflow in the vehicle. For optimum defrosting performance[...]
-
Página 104
During extreme high ambient temperatures when idling stationary for extended periods of time in gear , it is recommended to run the A/C in the MAX A/C position, reduce blower fan speed from the highest setting and put the vehicle’ s transmission into the P (Park) gear position (automatic transmission only) to continue to receive cool air from you[...]
-
Página 105
HEADLAMP CONTROL T urns the lamps off. T urns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps. T urns the low beam headlamps on. High beams Pull the lever to the second detent to activate. Pull the lever again to deactivate. Flash-to-pass Pull the lever toward you slightly to activate and release to deactivate. Head[...]
-
Página 106
Daytime running lamps (DRL) (if equipped) T urns the headlamps on with a reduced output. T o activate: • the ignition must be in the on position and • the headlamp control is in the off or parking lamp position. W ARNING: Always remember to turn on your headlamps at dusk or during inclement weather . The Daytime Running Lamp (DRL) system does n[...]
-
Página 107
V ertical aim adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away . • (1) 8 feet (2.4 meters) • (2) Center height of lamp to ground • (3) 25 feet (7.6 meters) • (4) Horizontal reference line 2. Measure the height from the center of your headlamp to the ground and m[...]
-
Página 108
TURN SIGNAL CONTROL • Push down to activate the left turn signal. • Push up to activate the right turn signal. When changing lanes, the turn signal indicator can be programmed to flash either one or three times when the stalk is tapped. See Multifunction display in the Instrument cluster section for more information. INTERIOR LAMPS Dome lamps a[...]
-
Página 109
Dome lamps and map lamps, rear lamps Press the buttons to turn the map lamps on/off. Ambient lighting (if equipped) Illuminates footwells, cupholders and the instrument panel with a choice of several colors. The ambient lighting control switch is located on the instrument panel. T o activate, press and release the control to cycle through the color[...]
-
Página 110
BULB REPLACEMENT Lamp assembly condensation Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a thin [...]
-
Página 111
Function Number of bulbs T rade number 4-door rear bodyside lamp (park/turn/sidemarker) 1 3157K 4-door rear deck lamp (backup) 1 921 5-door rear lamp (stop/reverse) 2 3157K 5-door rear lamp (turn) 1 3157A (amber) License plate lamp 1 W5W * High-mount brake lamp 1 LED Interior lamp 1 W6W Reading lamp 1 W5W Luggage compartment lamp 1 W5W T o replace [...]
-
Página 112
1. Make sure the headlamp control is in the off position, then open the hood. 2. Remove the screws and pushpin holding the lamp assembly (1). (Driver side shown) 3. Detach the lamp harness clips from the lamp assembly and disconnect the electrical connectors (2). 4. Remove the lamp assembly (3). Note: When lamp is removed, you will hear a clicking [...]
-
Página 113
1. Remove the bulb cover . 2. T urn the bulb holder counterclockwise and remove it. 3. Disconnect the electrical connector . 4. Reverse the procedure to install the new bulb. Replacing the high beam headlamps Note: The high beam headlamp is the inboard lamp. Note: Never hold a bulb by the glass. This is particularly valid for halogen bulbs as the i[...]
-
Página 114
2. T urn the bulb holder counterclockwise and remove it. 3. Disconnect the electrical connector . 4. Reverse the procedure to install the new bulb. Replacing the park/turn signals 1. T urn the bulb holder counterclockwise and remove it. 2. Remove the bulb from the bulb holder . 3. Reverse the procedure to install the new bulb. Lights 114 201 1 Fies[...]
-
Página 115
Replacing the side marker lamps 1. T urn the bulb holder clockwise and remove it. 2. Remove the bulb from the bulb holder . 3. Reverse the procedure to install the new bulb. Replacing the signal indicator mirror bulbs (if equipped) For bulb replacement, see your authorized dealer . Replacing the rear lamps (5-door) 1. Open the liftgate. 2. Remove t[...]
-
Página 116
Replacing the rear stop lamp (5-door) 1. T urn the bulb holder counterclockwise and remove it. 2. Remove the bulb from the holder . 3. Reverse the procedure to install the new bulb. Replacing the reverse signal rear lamp (5-door) 1. T urn the bulb holder counterclockwise and remove it. Lights 116 201 1 Fiesta (fie) Owners Guide, 1st Printing USA (f[...]
-
Página 117
2. Remove the bulb from the holder . 3. Reverse the procedure to install the new bulb. Replacing the turn signal rear lamp (5-door) 1. T urn the bulb holder counterclockwise and remove it. 2. Remove the bulb from the holder . 3. Reverse the procedure to install the new bulb. Lights 117 201 1 Fiesta (fie) Owners Guide, 1st Printing USA (fus)[...]
-
Página 118
Replacing bodyside rear lamp bulb (4-door) 1. Open the deck lid and remove the interior bodyside carpet. 2. T urn the bulb holder counterclockwise and remove it (2). 3. Remove the bulb (3) from the holder . 4. Reverse the procedure to install the new bulb. Replacing the decklid mounted reverse lamp bulb (4-door) 1. Open the deck lid and remove its [...]
-
Página 119
3. Remove the bulb (3) from the holder . 4. Reverse the procedure to install the new bulb. 5. Reinstall the carpet. Replacing the license plate lamps 1. Carefully release the spring clip (1). 2. Remove the lamp (2). 3. Remove the bulb (3). Replacing the high-mounted brake lamp For replacement, see your authorized dealer . 3 2 1 Lights 119 201 1 Fie[...]
-
Página 120
WINDSHIELD WIPERS Move the lever down for a single wipe. For intermittent operation, move control up one position and adjust the rotary control to the desired speed. For normal operation, move control up two positions and up three positions for high-speed wiping. W indshield washer T o activate the windshield washer , press the windshield washer co[...]
-
Página 121
TILT/T ELESCOPE STEERING WHEEL T o adjust the steering wheel: 1. Pull the lever down to unlock the steering column. 2. While the lever is in the down position, move the steering wheel up or down and in or out until you find the desired position. 3. While holding the steering wheel in place, pull the lever up to its original position to lock the ste[...]
-
Página 122
T o prevent the fuse from being blown, do not use the power point(s) over the vehicle capacity of 12V DC/180W . If the power point or cigar lighter socket is not working, a fuse may have blown. Refer to Fuses and relays in the Roadside Emergencies chapter for information on checking and replacing fuses. T o have full capacity usage of your power po[...]
-
Página 123
One-touch up or down (driver ’ s window only) This feature allows the driver’ s window to open or close fully without holding the control down. T o operate one-touch down, press the switch completely down to the second detent and release quickly . The window will open fully . Momentarily press the switch to any position to stop the window opera[...]
-
Página 124
4. Pull up the switch and hold until the window is fully closed. 5. Open the window and try to close it automatically . 6. Reset and repeat procedure if the window does not close automatically . Window lock The window lock feature allows only the driver and front passenger to operate the power windows. T o lock out all window controls (except the d[...]
-
Página 125
Note: A rear center passenger and/or raised rear center headrest (if equipped) may also block the light from reaching the sensor . Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum-based cleaning products. EXTERIOR MIRRORS Power side view mirrors (if equipped) W ARNING: Do not adjust the mirror while the [...]
-
Página 126
Signal indicator mirrors (if equipped) When the turn signal is activated, the outer portion of the appropriate mirror housing will blink. This provides an additional warning to other drivers that your vehicle is about to turn. SPEED CONTROL (IF EQUIPPED) W ith speed control set, you can maintain a set speed without keeping your foot on the accelera[...]
-
Página 127
Note: • V ehicle speed may vary momentarily when driving up and down a steep hill. • If the vehicle speed increases above the set speed on a downhill, you may want to apply the brakes to reduce the speed. • If the vehicle speed decreases more than 10 mph (16 km/h) below your set speed on an uphill, your speed control will disengage. Disengagi[...]
-
Página 128
Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased. STEERING WHEEL CONTROLS (IF EQUIPPED) SYNC 姞 system hands free control feature Press (located on the multi-function lever) briefly to use the voice command feature. Y ou will hear a tone and LISTENING will appear in the radio display . Press [...]
-
Página 129
T o open the moon roof: Press and hold the rear of the SLIDE control. If the sliding shade is closed, it will open along with the moon roof. T o close the moon roof: Press and hold the front of the SLIDE control. T o vent the moon roof: Press and hold the rear of the TIL T control. Press and hold the front of the TIL T control to close the moon roo[...]
-
Página 130
KEYS Integrated keyhead transmitters (IKT s) (If equipped) Y our vehicle may be equipped with two integrated keyhead transmitters (IKT s). The key blade starts the vehicle and unlocks/locks all the doors. The transmitter portion functions as the remote entry transmitter . Y our IKT s are programmed to your vehicle; using a non-programmed key will n[...]
-
Página 131
The IA key also contains a removable mechanical key blade that can be used to unlock the driver door . T o release the mechanical key blade, press the release buttons on the edge of the transmitter and remove the key blade. Y our IA keys are programmed to your vehicle. Y ou cannot enter or start your vehicle with an unprogrammed key . If you lose o[...]
-
Página 132
If both front doors are closed, the vehicle can be locked by any method, regardless of whether the key is in the ignition or not. Smart locks for intelligent access keys (IA key) (if equipped) This feature is intended to prevent you from unintentionally locking your IA key inside your vehicle’ s trunk. If your vehicle’ s perimeter alarm is in t[...]
-
Página 133
Autolock (if equipped) The autolock feature will lock all the doors when: • all doors are closed, • the ignition is in the on position, • you shift into any gear putting the vehicle in motion, and • the vehicle attains a speed greater than 4 mph (7 km/h). If a door(s) is unlocked, the autolock feature will repeat when: • the vehicle slows[...]
-
Página 134
CHILDPROOF DOOR LOCKS • When these locks are set, the rear doors cannot be opened from the inside. • The rear doors can be opened from the outside when the childproof door locks are set, but the doors are unlocked. The childproof locks are located on the rear edge of each rear door and must be set separately for each door . Setting the lock for[...]
-
Página 135
T o open the luggage compartment door (lid) from within the luggage compartment, pull the illuminated “T” shaped handle and push up on the trunk lid. The handle is composed of a material that will glow for hours in darkness following brief exposure to ambient light. The “T” shaped handle will be located either on the luggage compartment doo[...]
-
Página 136
The Integrated Keyhead T ransmitters (IKT s) and Intelligent Access keys (IA key) comply with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that m[...]
-
Página 137
• arm and disarm the perimeter anti-theft system. • operate the illuminated entry feature. The remote entry lock/unlock feature operates in any ignition position except when the engine is running and vehicle speed is more than 4 mph (7 km/h). If there are problems with the remote entry system, make sure to take ALL integrated keyhead transmitte[...]
-
Página 138
Activating intelligent access at the trunk: If your IA key is within 3 feet (1 meter) of the trunk, you can activate your intelligent access system by pressing the exterior trunk release button, located above the license plate. The trunk will release and open. Refer to the Remote entry system in this section for more details on how to use the lock,[...]
-
Página 139
Opening the luggage compartment Press twice (within 3 seconds) to open the luggage compartment. Note: This feature will not operate when the engine is running and vehicle speed is more than 4 mph (7 km/h). • Ensure that the trunk is closed and latched before driving your vehicle. Failure to properly latch the trunk may cause objects to fall out o[...]
-
Página 140
Intelligent Access key (IA key) 1. Press and hold the push buttons on the edges of the transmitter to release the cover . Carefully remove the cover . 2. Remove the key blade. 3. T wist a flat object in the position shown to separate the two halves of the transmitter . 4. Carefully insert a flat object in the position show to open the transmitter .[...]
-
Página 141
Replacing lost remote entry transmitters–integrated keyhead transmitters (IKT s) If you would like to have your remote entry transmitter reprogrammed because you lost one, or would like to buy additional remote entry transmitters, you can either reprogram them yourself, or take all remote entry transmitters to your authorized dealer for reprogram[...]
-
Página 142
2. W ithin 10 seconds, press any button on the transmitter to be programmed. A chime will sound to confirm that the transmitter is programmed. Repeat this step for each transmitter . Note: There is NO chime or any other confirmation upon exiting the programming mode. 3. Exiting the programming mode is accomplished if one of the following occurs: ?[...]
-
Página 143
Y our vehicle comes with two coded keys; additional coded keys may be purchased from and programmed by your authorized dealer . Note: The SecuriLock 威 passive anti-theft system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Lar[...]
-
Página 144
Replacement keys If your keys are lost or stolen and you don’t have an extra coded key , you will need to have your vehicle towed to an authorized dealer . The key codes need to be erased from your vehicle and new coded keys will need to be programmed. Replacing coded keys can be very costly . Store an extra programmed key away from the vehicle i[...]
-
Página 145
FRONT SEATING W ARNING: Reclining the seatback can cause an occupant to slide under the seat’ s safety belt, resulting in severe personal injuries in the event of a collision. W ARNING: Do not pile cargo higher than the seatbacks to reduce the risk of injury in a collision or sudden stop. W ARNING: Before returning the seatback to its original po[...]
-
Página 146
T o adjust the head restraint, do the following: 1. Adjust the seatback to an upright driving/riding position. 2. Raise the head restraint by pulling up on the head restraint (1). 3. Lower the head restraint by pressing and holding the guide sleeve adjust release button (3) and pushing down on the head restraint (1). Properly adjust the head restra[...]
-
Página 147
W ARNING: T o reduce the risk of possible serious injury: Do not hang objects off seat back or stow objects in map pocket (if equipped) when a child is in the front passenger seat. Do not place objects underneath the front passenger seat or between the seat and the center console (if equipped). Check the “passenger airbag off” or “pass airbag[...]
-
Página 148
• Recline adjustment Lift the control to adjust the angle of the seatback. W ARNING: Reclining the seatback can cause an occupant to slide under the seat’ s safety belt, resulting in severe personal injuries in the event of a collision. Heated seats (if equipped) W ARNING: Persons who are unable to feel pain to the skin because of advanced age,[...]
-
Página 149
T o operate the heated seats: • Press the button located on the instrument panel to activate. • Press again to deactivate. The heated seats will activate when the ignition is in the on position and the engine is running. REAR SEATS Second row head restraints Y our vehicle is equipped with rear seat outboard and center head restraints that look [...]
-
Página 150
T o lower the seatback(s) from inside the vehicle, do the following: 1. Press the unlock buttons (1) down and hold them there. 2. Push the seatback forward. 3. Stow the safety belt in the belt stowage clip. This will prevent the safety belt from getting caught in the seat latch. When raising the seatback(s), make sure you hear the seat latch into p[...]
-
Página 151
W ARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. Make sure that the safety belt is not laying on the seat latch. After returning the seatback to its original position, pull on the seatback to ensure that it has fully latched. An unlatched seat may become dange[...]
-
Página 152
The fact that the pretensioners or airbags did not activate for both front seat occupants in a collision does not mean that something is wrong with the system. Rather , it means the Personal Safety System determined the accident conditions (crash severity , belt usage, etc.) were not appropriate to activate these safety devices. Front airbags are d[...]
-
Página 153
W ARNING: Air bags can kill or injure a child in a child seat. NEVER place a rear -facing child seat in front of an active air bag. If you must use a forward-facing child seat in the front seat, move the seat all the way back. W ARNING: Always transport children 12 years old and under in a rear seating position and always properly use appropriate c[...]
-
Página 154
Front outboard safety belt energy management retractors The front safety belt energy management retractors allow webbing to be pulled out of the retractor in a gradual and controlled manner in response to the occupant’ s forward momentum. This helps reduce the risk of force-related injuries to the occupant’ s chest by limiting the load on the o[...]
-
Página 155
W ARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a collision. W ARNING: All occupants of the vehicle, including the driver , should always properly wear their safety belts, even when an air bag supplemental restraint system (SRS) is provided. W ARNING: [...]
-
Página 156
1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle. 2. T o unfasten, press the release button and remove the tongue from the buckle. Restraint of pregnant women W ARNING: Always ride and driv[...]
-
Página 157
Safety Belt Locking Modes All safety restraints in the vehicle are combination lap and shoulder belts. The driver safety belt has the first locking mode and the front outboard passenger and rear seat safety belts have both types of locking modes described as follows: V ehicle sensitive mode This is the normal retractor mode, which allows free shoul[...]
-
Página 158
• Grasp the shoulder portion and pull downward until the entire belt is pulled out. • Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the safety belt is now in the automatic locking mode. How to disengage the automatic locking mode Disconnect the combination lap/shoulder belt and allow it to retra[...]
-
Página 159
W ARNING: Do not use extensions to change the fit of the shoulder belt across the torso. Safety belt height adjustment Y our vehicle has safety belt height adjustments at the front outboard seating positions. Adjust the height of the shoulder belt so the belt rests across the middle of your shoulder . T o adjust the shoulder belt height, pull the b[...]
-
Página 160
Conditions of operation If... Then... The driver’ s safety belt is not buckled before the ignition switch is turned to the on position... The safety belt warning light illuminates 1-2 minutes and the warning chime sounds 4-8 seconds. The driver’ s safety belt is buckled while the indicator light is illuminated and the warning chime is sounding.[...]
-
Página 161
If... Then... The driver’ s and front passenger’ s safety belts are buckled before the ignition switch is turned to the on position or less than 1-2 minutes have elapsed since the ignition switch has been turned to on... The Belt-Minder 威 feature will not activate. The driver’ s or front passenger’ s safety belt is not buckled when the ve[...]
-
Página 162
The following are reasons most often given for not wearing safety belts (All statistics based on U.S. data): Reasons given... Consider ... “Crashes are rare events” 36700 crashes occur every day . The more we drive, the more we are exposed to “rare” events, even for good drivers. 1i n4o fu sw i l lb e seriously injured in a crash during our[...]
-
Página 163
Reasons given... Consider ... “I have an airbag” Airbags offer greater protection when used with safety belts. Frontal airbags are not designed to inflate in rear and side crashes or rollovers. “I’d rather be thrown clear” Not a good idea. People who are ejected are 40 times more likely to DIE. Safety belts help prevent ejection, WE CAN?[...]
-
Página 164
W ARNING: While the design allows you to deactivate your Belt-Minder 威 , this system is designed to improve your chances of being safely belted and surviving an accident. W e recommend you leave the Belt-Minder 威 system activated for yourself and others who may use the vehicle. T o reduce the risk of injury , do not deactivate/activate the Belt[...]
-
Página 165
AIRBAG SUPPLEMENT AL RESTRAINT SYSTEM (SRS) The supplemental restraint system is designed to work with the safety belt to help protect the driver and right front passenger from certain upper body injuries. W ARNING: Airbags DO NOT inflate slowly or gently , and the risk of injury from a deploying airbag is the greatest close to the trim covering th[...]
-
Página 166
W ARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. W ARNING: The National Highway T raffic Safety Administration (NHTSA) recommends a minimum distance of at least 10 inches (25 cm) between an occupant’ s chest and the driver airbag module. W ARNING: Never place your arm over the [...]
-
Página 167
Children and airbags Children must always be properly restrained. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Failure to follow these instructions may increase the risk of injury in a collision. W ARNING: Airbags can kill or injure a child in a child [...]
-
Página 168
The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (e.g., baking soda) that result from the combustion process that inflates the airbag. Small amo[...]
-
Página 169
• a readiness light and tone • and the electrical wiring which connects the components • Side curtain airbag system. Refer to Side curtain airbag system later in this chapter . • Front passenger sensing system. Refer to Front passenger sensing system later in this chapter . • “Passenger airbag off” or “pass airbag off” indicator l[...]
-
Página 170
• the system determines that a small child is present in a forward-facing child restraint that is installed according to the manufacturer’ s instructions, • the system determines that a small child is present in a booster seat, • a front passenger takes his/her weight off of the seat for a period of time, • a child or a small person occup[...]
-
Página 171
If a person of adult size is sitting in the front passenger’ s seat, but the ⬙ passenger airbag off ⬙ or ⬙ pass airbag off ⬙ indicator lamp is lit, it is possible that the person isn’t sitting properly in the seat. If this happens: • T urn the vehicle off and ask the person to place the seatback in the full upright position. • Have [...]
-
Página 172
The front passenger sensing system may detect small or medium objects placed on the seat cushion. For most objects that are in the front passenger seat, the passenger airbag will be disabled. Even though the passenger airbag is disabled, the ⬙ pass airbag off ⬙ lamp may or may not be illuminated according to the table below . Objects Pass Airba[...]
-
Página 173
W ARNING: T o reduce the risk of possible serious injury: Do not stow objects in seat back map pocket (if equipped) or hang objects off seat back if a child is in the front passenger seat. Do not place objects underneath the front passenger seat or between the seat and the center console (if equipped). Check the “passenger airbag off” or “pas[...]
-
Página 174
W ARNING: Any alteration/modification to the front passenger seat may affect the performance of the front passenger sensing system. Determining if the system is operational The supplemental restraint system uses a warning indicator light in the instrument cluster or a backup tone to indicate the condition of the system. Refer to the W arning lights[...]
-
Página 175
W ARNING: Do not attempt to service, repair , or modify the airbag SRS, its fuses or the seat cover on a seat containing an airbag. Contact your authorized dealer as soon as possible. W ARNING: All occupants of the vehicle should always wear their safety belts even when an airbag SRS is provided. How does the side airbag system work? The design and[...]
-
Página 176
The fact that the airbags did not inflate in a collision does not mean that something is wrong with the system. Rather , it means the forces were not of the type sufficient to cause activation. Side airbags are designed to inflate in side-impact collisions, not roll-over , rear -impact, frontal or near -frontal collisions, unless the collision caus[...]
-
Página 177
W ARNING: Do not place objects or mount equipment on or near the side air curtain cover . W ARNING: Do not lean your head on the door . The side airbag could injure you as it deploys from the seat. W ARNING: Do not attempt to service, repair , or modify the side air curtain system, its fuses, the A, B, or C pillar trim, or the headliner on a vehicl[...]
-
Página 178
How does the side air curtain system work? The design and development of the side air curtain system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag T echnical W orking Group. These recommended testing procedures help reduce the risk of injuries related to the deployment o[...]
-
Página 179
provided to occupants in side impact collisions. The seat-mounted side airbag was designed to inflate between the door panel and occupant to further enhance the protection provided occupants in side impact collisions. The side air curtain system SRS is designed to activate when the vehicle sustains lateral deceleration sufficient to cause the senso[...]
-
Página 180
• The readiness light will not illuminate immediately after ignition is turned on. • A series of five beeps will be heard. The tone pattern will repeat periodically until the problem and/or light are repaired. If any of these things happen, even intermittently , have the SRS serviced at your authorized dealer immediately . Unless serviced, the [...]
-
Página 181
W ARNING: All children are shaped differently . The Recommendations for Safety Restraints are based on probable child height, age and weight thresholds from NHTSA and other safety organizations or are the minimum requirements of law . Ford recommends checking with a NHTSA Certified Child Passenger Safety T echnician (CPST) and consult your pediatri[...]
-
Página 182
Recommendations for Safety Restraints for Children Child size, height, weight, or age Recommended restraint type Larger children Children who have outgrown or no longer properly fit in a belt-positioning booster seat (generally children who are at least 4 feet 9 inches (1.45 meters) tall or greater than 80 lb (36 kg) or 100 lb (45 kg) if recommende[...]
-
Página 183
Recommendations for attaching child safety restraints for children Restraint T ype Child W eight Use any attachment method as indicated below by “X” LA TCH (lower anchors and top tether anchor) LA TCH (lower anchors only) Safety belt and top tether anchor Safety belt and LA TCH (lower anchors and top tether anchor) Safety belt only Rear facing [...]
-
Página 184
W ARNING: Always carefully follow the instructions and warnings provided by the manufacturer of any child restraint to determine if the restraint device is appropriate for your child’ s size, height, weight, or age. Follow the child restraint manufacturer’ s instructions and warnings provided for installation and use in conjunction with the ins[...]
-
Página 185
training to ensure that all children ages 0 to 16 are properly restrained in the correct restraint system. Ford recommends checking with a NHTSA Certified Child Passenger Safety T echnician (CPST) and your pediatrician to make sure your seat is appropriate for your child and properly installed in the vehicle. T o locate a child seat fitting station[...]
-
Página 186
Airbags can kill or injure a child in a child seat. NEVER place a rear -facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat all the way back. Children 12 and under should be properly restrained in a rear seating position whenever possible. If all children cannot be sea[...]
-
Página 187
1. Position the child safety seat in a seat with a combination lap and shoulder belt. 2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together . 3. While holding the shoulder and lap belt portions together , route the tongue through the child seat according to the child seat manufacturer’ s instructions. Be sure th[...]
-
Página 188
4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it. 5. T o put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull[...]
-
Página 189
vehicle. Sometimes, a slight lean towards the buckle will additionally help to remove remaining slack from the belt. 9. Attach the tether strap (if the child seat is equipped). Refer to Attaching child safety seats with tether straps later in this chapter . 10. Before placing the child in the seat, forcibly move the seat forward and back to make su[...]
-
Página 190
Y our vehicle has LA TCH lower anchors for child seat installation at the seating positions marked with the child seat symbol. The LA TCH anchors are located at the rear section of the rear seat between the cushion and seatback. Follow the child seat manufacturer’ s instructions to properly install a child seat with LA TCH attachments. Follow the[...]
-
Página 191
Use of inboard lower anchors from the outboard seating positions (center seating use) The lower anchors at the center of the second row rear seat are spaced 390 mm (15 inches) apart. The standardized spacing for LA TCH lower anchors is 280 mm (11 inches) center to center . A child seat with rigid LA TCH attachments cannot be installed at the center[...]
-
Página 192
The rear seats of your vehicle are equipped with built-in tether strap anchors located behind the seats as described below . Four door: The tether anchors in your vehicle are located under a cover marked with the tether anchor symbol (shown with title). Five door: The tether anchors in your vehicle are located on the back panel of the rear seat, ma[...]
-
Página 193
2. Locate the correct anchor for the selected seating position. 3. Open the tether anchor cover . 4. Clip the tether strap to the anchor as shown. If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision. 5. T ighten the child safety seat tether strap according to the manufacturer?[...]
-
Página 194
2. Locate the correct anchor for the selected seating position. 3. Clip the tether strap to the anchor as shown. If the tether strap is clipped incorrectly , the child safety seat may not be retained properly in the event of a collision. 4. T ighten the child safety seat tether strap according to the manufacturer’ s instructions. If the safety se[...]
-
Página 195
Although the lap/shoulder belt will provide some protection, children who have outgrown a typical child seat are still too small for lap/shoulder belts to fit properly , and wearing an improperly fitted vehicle safety belt could increase the risk of serious injury in a crash. T o improve the fit of both the lap and shoulder belt on children who hav[...]
-
Página 196
T ypes of booster seats There are generally two types of belt-positioning booster seats: backless and high back. Always use booster seats in conjunction with the vehicle lap/shoulder belt. • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat back or no head [...]
-
Página 197
Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder . The drawings below compare the ideal fit (center) to a shoulder belt uncomfortably close to [...]
-
Página 198
Follow all instructions provided by the manufacturer of the booster seat. W ARNING: Never place, or allow a child to place, the shoulder belt under a child’ s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a collision. Child restraint and safety belt maintena[...]
-
Página 199
INFORMA TION ABOUT UNIFORM TIRE QUALITY GRADING T ire Quality Grades apply to new pneumatic passenger car tires. The Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: • T readwear 200 T raction AA T emperature A These T ire Quality Grades are determined by standards th[...]
-
Página 200
W ARNING: The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics. T emperature A B C The temperature grades are A (the highest), B and C, representing the tire’ s resistance to the generation of heat and its ability to [...]
-
Página 201
Increasing the inflation pressure beyond this pressure will not increase the tire’ s load carrying capability . • kPa: Kilopascal, a metric unit of air pressure. • PSI: Pounds per square inch, a standard unit of air pressure. • Cold inflation pressure: The tire pressure when the vehicle has been stationary and out of direct sunlight for an [...]
-
Página 202
W ARNING: Under -inflation is the most common cause of tire failures and may result in severe tire cracking, tread separation or “blowout”, with unexpected loss of vehicle control and increased risk of injury . Under -inflation increases sidewall flexing and rolling resistance, resulting in heat buildup and internal damage to the tire. It also [...]
-
Página 203
Note: If you have to drive a distance to get air for your tire(s), check and record the tire pressure first and add the appropriate air pressure when you get to the pump. It is normal for tires to heat up and the air pressure inside to go up as you drive. 2. Remove the cap from the valve on one tire, then firmly press the tire gauge onto the valve [...]
-
Página 204
Improper or inadequate vehicle maintenance can cause tires to wear abnormally . Inspect all your tires, including the spare, frequently , and replace them if one or more of the following conditions exist: Tire wear When the tread is worn down to 1/16th of an inch (2 mm), tires must be replaced to help prevent your vehicle from skidding and hydropla[...]
-
Página 205
U.S. DOT Tire Identification Number (TIN) Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT T ire Identification Number for safety standard certification[...]
-
Página 206
W ARNING: When mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below . If the beads do not seat at the maximum pressure indicated, re-lubricate and try again. When inflating the tire for mounting pressures up to 20 psi (138[...]
-
Página 207
• Do not run over curbs or hit the tire against a curb when parking W ARNING: If your vehicle is stuck in snow , mud, sand, etc., do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. W ARNING: Do not spin the wheels at over 35 mph (56 km/h). The tires[...]
-
Página 208
• Front-wheel drive (FWD) vehicles (front tires at top of diagram) Sometimes irregular tire wear can be corrected by rotating the tires. Note: If your tires show uneven wear ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation. Note: Y our vehicle may be equip[...]
-
Página 209
Information on “P” type tires P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below . (Note that the tire size, load index and speed rating for your vehicle may be different from this example.) 1. P: Indicates a tire, designated by the T ire and Rim Association (T&RA), that[...]
-
Página 210
Note: Y ou may not find this information on all tires because it is not required by federal law . Letter rating Speed rating - mph (km/h) M 81 mph (130 km/h) N 87 mph (140 km/h) Q 99 mph (159 km/h) R 106 mph (171 km/h) S 112 mph (180 km/h) T 118 mph (190 km/h) U 124 mph (200 km/h) H 130 mph (210 km/h) V 149 mph (240 km/h) W 168 mph (270 km/h) Y 186[...]
-
Página 211
12. T readwear , T raction and T emperature Grades • T readwear: The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half (1 1 ⁄ 2 ) times as well on the government course as a tire grad[...]
-
Página 212
Additional information contained on the tire sidewall for “L T” type tires “L T” type tires have some additional information beyond those of “P” type tires; these differences are described below . Note: T ire Quality Grades do not apply to this type of tire. 1. LT: Indicates a tire, designated by the T ire and Rim Association (T&RA)[...]
-
Página 213
Information on “T” type tires “T” type tires have some additional information beyond those of “P” type tires; these differences are described below: T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example. T ire Quality Grades do not apply to this type of tire. 1. T: Ind[...]
-
Página 214
TIRE PRESSURE MONITORING SYSTEM (TPMS) Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard[...]
-
Página 215
The tire pressure monitoring system complies with part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. W ARNING: The [...]
-
Página 216
Understanding your tire pressure monitoring system (TPMS) The tire pressure monitoring system measures pressure in your four road tires and sends the tire pressure readings to your vehicle. The low tire pressure warning lamp will turn on if the tire pressure is significantly low . Once the light is illuminated, your tires are under inflated and nee[...]
-
Página 217
When you believe your system is not operating properly The main function of the tire pressure monitoring system is to warn you when your tires need air . It can also warn you in the event the system is no longer capable of functioning as intended. Please refer to the following chart for information concerning your tire pressure monitoring system: L[...]
-
Página 218
Low tire pressure warning light Possible cause Customer action required Flashing warning light Spare tire in use Y our temporary spare tire is in use. Repair the damaged road wheel and re-mount it on the vehicle to restore system functionality . For a description of how the system functions under these conditions, refer to When your temporary spare[...]
-
Página 219
SNOW TIRES AND CHAINS W ARNING: Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover , personal injury and death. Add[...]
-
Página 220
Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the T ire Label on the B-Pillar or the edge of the driver’ s door (vehicles exported outside the US and Canada may not have a T ire Label). Look for “THE COMBINED WEIGHT OF OCCUP ANTS AND CARGO SHOULD NEV[...]
-
Página 221
Example only: Cargo W eight – includes all weight added to the Base Curb W eight, including cargo and optional equipment. GA W (Gross Axle W eight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. Tires, Wheels and Loading 221 201 1 Fiesta (fie) Owners Guide, 1st Printing USA (fus)[...]
-
Página 222
GA WR (Gross Axle W eight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label located on the B-Pillar or the edge of the driver’ s door . The total load on each axle must never exceed its GA WR. GVW (Gross V ehicle W eight) – is th[...]
-
Página 223
• Example only: W ARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury . W ARNING: Do not exceed the GVWR or the GA WR specified on the S[...]
-
Página 224
W ARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’ s GVWR and GA WR limitations. Replacement tires with a higher limit than the original tires do not increase the GVWR and GA WR limitations. W ARNING: Exceeding any vehicle weight rating limitation could result in [...]
-
Página 225
• A final example for your vehicle with 1400 lb. (635 kg) of cargo and luggage capacity . Y ou and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years. Measuring the inside of the vehicle with the rear seat folded down, you have room for 12-100 lb. (45[...]
-
Página 226
Front-wheel drive (FWD) vehicles equipped with a manual transmission: If your vehicle is equipped with a manual transmission, shifting the transmission into neutral permits “flat-towing” (all wheels on the ground) for pulling behind a motorhome. Before you tow your vehicle: • Release the parking brake. • Move the gearshift to the neutral po[...]
-
Página 227
STARTING Positions of the ignition If your vehicle is equipped with a push button start system, refer to Push button start system in this section for ignition modes. 1. 0 (off) — locks the steering wheel, automatic transmission gearshift lever and allows key removal. This position also shuts the engine and all electrical accessories off. 2. I (ac[...]
-
Página 228
W ARNING: Do not start your vehicle in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine. See Guarding against exhaust fumes in this chapter for more instructions. W ARNING: If you smell exhaust fumes inside your vehicle, have your dealer inspect your vehicle immediately [...]
-
Página 229
• Make sure the gearshift is in P (Park). If starting a vehicle with a manual transmission: • Make sure the parking brake is set. • Press the clutch pedal to the floor . 3. T urn the key to II (on) without turning the key to III (start). Some warning lights will briefly illuminate. See W arning lights and chimes in the Instrument Cluster chap[...]
-
Página 230
1. T urn the key to II (on) without turning the key to III (start). 2. T urn the key to III (start), then release the key as soon as the engine begins cranking. Y our vehicle has a computer assisted cranking system that assists in starting the engine. After releasing the key from the III (start) position, the engine may continue cranking for up to [...]
-
Página 231
and release of the ST ART/STOP button will not switch off the engine. In order to switch off the engine while the vehicle is in motion, press and hold the ST ART/STOP button for at least one second. 2. On — press the ST ART/STOP button without applying the brake pedal (automatic transmission) or clutch pedal (manual transmission). This will power[...]
-
Página 232
Fast restart feature: The fast restart feature allows you to re-start your vehicle within 10 seconds of switching the vehicle off, if a valid IA key is not present when the vehicle is switched off. Y ou can re-start the vehicle (by applying the brake/clutch pedal and pressing the ST ART/STOP button) for up to 10 seconds, even though the IA key is n[...]
-
Página 233
ENGINE BLOCK HEATER (IF EQUIPPED) An engine block heater warms the engine coolant which aids in starting and allows the heater/defroster system to respond quickly . If your vehicle is equipped with this system, your equipment includes a heater element which is installed in your engine block and a wire harness which allows the user to connect the sy[...]
-
Página 234
• Be sure that areas where the vehicle is parked are clean and clear of all combustibles such as petroleum products, dust, rags, paper and similar items. • Be sure that the engine block heater , heater cord and extension cord are solidly connected. A poor connection can cause the cord to become very hot and may result in an electrical shock or [...]
-
Página 235
Under normal operating conditions, brake dust may accumulate on the wheels. Some brake dust is inevitable as brakes wear and does not contribute to brake noise. The use of modern friction materials with emphasis on improved performance and environmental considerations can lead to more dust than in the past. Brake dust can be cleaned by weekly washi[...]
-
Página 236
Parking brake T o set the parking brake (1), pull the parking brake handle up as far as possible. The BRAKE warning lamp will illuminate and will remain illuminated until the parking brake is released. T o release, press and hold the button (2), pull the handle up slightly , then push the handle down. W ARNING: Always set the parking brake fully an[...]
-
Página 237
W ARNING: V ehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and/or wheel/tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceT rac 威 system. In addition, installing any stereo loudspeakers may interfere with an[...]
-
Página 238
When an event occurs that activates AdvanceT rac 威 , you may experience the following: • A slight deceleration of the vehicle • The stability control light will flash. • A vibration in the pedal when your foot is on the brake pedal • If the driving condition is severe and your foot is not on the brake, the brake pedal may move as the syst[...]
-
Página 239
Certain adverse driving maneuvers may activate the ESC system, which include but are not limited to: • T aking a turn too fast • Maneuvering quickly to avoid an accident, pedestrian or obstacle • Driving over a patch of ice or other slippery surfaces • Changing lanes on a snow-rutted road • Entering a snow-free road from a snow-covered si[...]
-
Página 240
If the steering wanders or pulls, check for: • an improperly inflated tire. • uneven tire wear . • loose or worn suspension components. • loose or worn steering components. • improper steering alignment. A high crown in the road or high crosswinds may also make the steering seem to wander/pull. Speed sensitive steering The steering in you[...]
-
Página 241
If the fuse is not blown and the brake lamps are working properly , the following procedure will allow you to move the gearshift lever from P (Park): 1. Apply the parking brake, turn the ignition key to the off position, and remove the key . 2. Using a screwdriver (or similar tool), carefully pry off and remove the passenger side console cover to e[...]
-
Página 242
W ARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly . See your authorized dealer . AUTOMATIC TRANSMISSION OPERATION (IF EQUIPPED) Understanding the gearshift positions of the 6–speed automatic transmission (if equipped) P (Park) This position locks the transmissi[...]
-
Página 243
N (Neutral) W ith the gearshift lever in N (Neutral), the vehicle can be started and is free to roll. Hold the brake pedal down while in this position. D (Drive) The normal driving position for the best fuel economy . T ransmission operates in gears one through six. D (Drive) with Overdrive Cancel/Grade Assist Pressing the transmission control swit[...]
-
Página 244
Overdrive cancel with grade assist is designed to provide optimal gear selection in hilly terrain or mountainous areas. It is recommended that you return to D (Drive) on flat terrain to provide the best fuel economy and transmission function. T o return to D (Drive), press the transmission control switch again. • The grade assist lamp in the inst[...]
-
Página 245
W ARNING: During all times you are responsible for controlling the vehicle, supervising the HSA system and intervening, if required. Activating HSA 1. Press the brake pedal to bring the vehicle to a complete standstill. Keep the brake pedal pressed. 2. If the sensors detect that the vehicle is on a slope, the HSA system will be activated automatica[...]
-
Página 246
Do not rock the vehicle for more than a minute or damage to the transmission and tires may occur , or the engine may overheat. MANUAL TRANSMISSION OPERATION (IF EQUIPPED) Using the clutch Manual transmission vehicles have a starter interlock that prevents cranking the engine unless the clutch pedal is fully pressed. T o start the vehicle: 1. Make s[...]
-
Página 247
Upshift according to the following chart: Recommended upshifts (for best fuel economy) when accelerating 5-speed manual transmission Shift from: 1 - 2 14 mph (23 km/h) 2 - 3 24 mph (39 km/h) 3 - 4 32 mph (51 km/h) 4 - 5 44 mph (71 km/h) Reverse Make sure that your vehicle is at a complete stop before you shift into R (Reverse). Failure to do so may[...]
-
Página 248
BLIND SPOT MIRRORS Blind spot mirrors have an integrated convex spotter mirror built into the upper outboard corner of the outside mirrors. They are designed to assist the driver by increasing visibility along the side of the vehicle. For more information on your side view mirrors, refer to Exterior mirrors in the Driver Controls chapter . Driving [...]
-
Página 249
DRIVING THROUGH WATER If driving through deep or standing water is unavoidable, proceed very slowly especially when the depth is not known. Never drive through water that is higher than the bottom of the wheel rims (for cars) or the bottom of the hubs (for trucks). When driving through water , traction or brake capability may be limited. Also, wate[...]
-
Página 250
ROADSIDE ASSISTANCE Getting roadside assistance T o fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New V ehicle Limited W arranty . The service is available: • 24-hours, seven days a week • for the coverage period listed on the Roadside[...]
-
Página 251
Canadian customers refer to your W arranty Guide or visit our website at www .ford.ca for information on: Using roadside assistance Complete the roadside assistance identification card and place it in your wallet for quick reference. In the United States, this card is found in the Owner Guide portfolio in the glove compartment. In Canada, the card [...]
-
Página 252
Should your vehicle shut off after a collision due to this feature, you may restart your vehicle by doing the following: 1. T urn the ignition switch to the off position. 2. T urn the ignition switch to the on position. In some instances the vehicle may not restart the first time you try to restart and may take one additional attempt. W ARNING: Fai[...]
-
Página 253
COLOR Fuse rating Mini fuses Standard fuses Maxi fuses Cartridge maxi fuses Fuse link cartridge 15A Blue Blue — — — 20A Y ellow Y ellow Y ellow Blue Blue 25A Natural Natural — — — 30A Green Green Green Pink Pink 40A — — Orange Green Green 50A — — Red Red Red 60A — — Blue Y ellow Y ellow 70A — — T an — Brown 80A — —[...]
-
Página 254
The fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Protected circuits F1 15A Ignition switch, Keyless entry ignition relay , Keyless entry accessory relay F2 10A Electronic mirror , A/C clutch, Engine compartment fuse panel F3 7.5A Instrument cluster F4 7.5A Passenger airbag deactivation indicator , Occupant classification system F[...]
-
Página 255
Fuse/Relay Location Fuse Amp Rating Protected circuits F21 10A BCM, Climate control, Passive anti-theft system transceiver , Electronic power steering module, Instrument cluster , Engine compartment fuse panel F22 7.5A Accelerator pedal position sensor , Powertrain control module (PCM), Gear shifter , Anti-lock brake system (ABS) ignition feed F23 [...]
-
Página 256
Fuse/Relay Location Fuse Amp Rating Protected circuits R5 — Passenger heated seat relay R6 — IA module – accessory relay R7 — IA module – ignition relay R8 — Battery saver relay R9 — Delay accessory relay Power distribution box The power distribution box is located in the engine compartment. The power distribution box contains high-cu[...]
-
Página 257
T o remove a fuse, use the fuse puller tool provided on the inside of the passenger compartment fuse panel cover . The high-current fuses are coded as follows: Fuse/Relay Location Fuse Amp Rating Protected circuits F1 40A* Anti-lock brake system (ABS) pump F2 50A* T ransmission control module (TCM) F3 40A* Engine cooling fan relay F4 40A* Heater bl[...]
-
Página 258
Fuse/Relay Location Fuse Amp Rating Protected circuits F7 60A* Passenger compartment fuse panel F8 30A* Fuel pump F9 20A* ABS module valve F10 — Not used F11 30A* Starter inhibit relay , Starter motor F12 10A** Left headlamp (high beam) F13 10A** Right headlamp (high beam) F14 10A** Left headlamp (low beam) F15 10A** Right headlamp (low beam) F16[...]
-
Página 259
Fuse/Relay Location Fuse Amp Rating Protected circuits F29 10A** A/C clutch solenoid and relay F30 30A** Not used (spare) F31 20A** Low beam relay F32 20A** BCM – battery saver , horn F33 30A** BCM – rear window defroster F34 — Not used F35 — Not used F36 — Not used F37 — Not used F38 — Not used F39 — Not used F40 — Not used R1 ?[...]
-
Página 260
CHANGING THE TIRES If you get a flat tire while driving, do not apply the brake heavily . Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road. Note: The tire pressure monitoring system (TPMS) indicator light will illuminate when the spare tire is in use. T o restore the full[...]
-
Página 261
A dissimilar spare tire/wheel is defined as a spare tire and/or wheel that is different in brand, size or appearance from the road tires and wheels and can be one of three types: 1. T -type mini-spare: This spare tire begins with the letter “T” for tire size and may have “T emporary Use Only” molded in the sidewall 2. Full-size dissimilar s[...]
-
Página 262
The usage of a full-size dissimilar spare tire/wheel can lead to impairment of the following: • Handling, stability and braking performance • Comfort and noise • Ground clearance and parking at curbs • W inter weather driving capability • W et weather driving capability • All-wheel driving capability (if applicable) • Load leveling ad[...]
-
Página 263
Tire change procedure W ARNING: When one of the front wheels is off the ground, the transmission alone will not prevent the vehicle from moving or slipping off the jack, even if the vehicle is in P (Park) (automatic transmission) or R (Reverse) (manual transmission). W ARNING: T o help prevent the vehicle from moving when you change a tire, be sure[...]
-
Página 264
3. Loosen each wheel lug nut one-half turn counterclockwise but do not remove them until the wheel is raised off the ground. 4. The vehicle jacking points are located inward of the wheels. W ARNING: T o lessen the risk of personal injury , do not put any part of your body under the vehicle while changing a tire. Do not start the engine when your ve[...]
-
Página 265
9. Remove the jack and fully tighten the lug nuts in the order shown. Refer to Wheel lug nut torque specifications later in this chapter for the proper lug nut torque specification. 10. Put the flat tire, jack and lug wrench away . Make sure the jack is fastened so it does not rattle when you drive. Unblock the wheels. WHEEL LUG NUT TORQUE SPECIFIC[...]
-
Página 266
Note: Inspect the wheel pilot hole prior to installation. If there is visible corrosion in wheel pilot hole, remove loose particles by wiping with clean rag and apply grease. Apply grease only to the wheel pilot hole surface by smearing a “dime” (1 square cm) sized glob of grease around the wheel pilot surface (1) with end of finger . DO NOT ap[...]
-
Página 267
Preparing your vehicle When the battery is disconnected or a new battery is installed, the automatic transmission must relearn its shift strategy . As a result, the transmission may have firm and/or soft shifts. This operation is considered normal and will not affect function or durability of the transmission. Over time, the adaptive learning proce[...]
-
Página 268
1. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery . 2. Connect the other end of the positive (+) cable to the positive (+) terminal of the assisting battery . 3. Connect the negative (-) cable to the negative (-) terminal of the assisting battery . 4. Make the final connection of the negative (-) cable [...]
-
Página 269
Removing the jumper cables Remove the jumper cables in the reverse order that they were connected. Note: In the illustration, the vehicle on the bottom is used to designate the assisting (boosting) battery . 1. Remove the jumper cable from the ground metal surface. 2. Remove the jumper cable on the negative (-) terminal of the booster vehicle’ s [...]
-
Página 270
WRECKER TOWING If you need to have your vehicle towed, contact a professional towing service or , if you are a member of a roadside assistance program, your roadside assistance service provider . It is recommended that your vehicle be towed with a wheel lift and dollies or flatbed equipment. Do not tow with a slingbelt. Ford Motor Company has not a[...]
-
Página 271
Emergency towing In case of a roadside emergency with a disabled vehicle (without access to wheel dollies, car hauling trailer , or flatbed transport vehicle) your vehicle (regardless of transmission powertrain configuration) can be flat towed (all wheels on the ground) under the following conditions: • V ehicle is facing forward so that it is be[...]
-
Página 272
GETTING THE SERVICES YOU NEED W arranty repairs to your vehicle must be performed by an authorized Ford, Lincoln, or Mercury dealer . While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction. Please note that certai[...]
-
Página 273
In Canada: Mailing address (Ford vehicles) Customer Relationship Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6J 5E4 T elephone 1-800-565-3673 (FORD) Online www .ford.ca Mailing address (Lincoln vehicles) Lincoln Centre Ford Motor Company of Canada, Limited P .O. Box 2000 Oakville, Ontario L6J 5E4 T elephone 1-800-[...]
-
Página 274
In the United States, a warranty dispute must be submitted to the BBB AUTO LINE before taking action under the Magnuson-Moss W arranty Act, or to the extent allowed by state law , before pursuing replacement or repurchase remedies provided by certain state laws. This dispute handling procedure is not required prior to enforcing state created rights[...]
-
Página 275
THE BETTER BUSINESS BUREAU (BBB) AUTO LINE PROGRAM (U.S. ONLY) Y our satisfaction is important to Ford Motor Company and to your dealer . If a warranty concern has not been resolved using the three-step procedure outlined on the first page of the Customer Assistance section, you may be eligible to participate in the BBB AUTO LINE program. The BBB A[...]
-
Página 276
UTILIZING THE MEDIATION/ARBITRATION PROGRAM (CANADA ONLY) For vehicles delivered to authorized Canadian dealers. In those cases where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory , Ford of Canada participates in an impartial third part[...]
-
Página 277
If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. Virgin Islands, Central America, the Caribbean, and Israel, contact the nearest authorized dealer . If the authorized dealer cannot help you, contact: FORD MOTOR COMP ANY FORD EXPORT OPERA TIONS 1555 Fairlane Drive Fairlane Business P[...]
-
Página 278
If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations. If you are in another foreign country , contact the nearest authorized dealer . If the authorized dealer employees cannot help you, they can direct you[...]
-
Página 279
REPORTING SAFETY DEFECTS (U.S. ONLY) If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T raffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company . If NHTSA receives similar complaints, it may open an investigation, and i[...]
-
Página 280
W ASHING THE EXTERIOR W ash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, such as Motorcraft 威 Detail W ash (ZC-3-A), which is available from your authorized dealer . • Never use strong household detergents or soap, such as dish washing or laundry liquid. These products can discolor and spot painted surfaces. • [...]
-
Página 281
W AXING • W ash the vehicle first. • Use a quality wax that does not contain abrasives. • Do not allow paint sealant to come in contact with any non-body (low-gloss black) colored trim, such as grained door handles, roof racks, bumpers, side moldings, mirror housings or the windshield cowl area. The paint sealant will “gray” or stain the [...]
-
Página 282
ENGINE Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal. When washing: • T ake care when using a power washer to clean the engine. The high-pressure fluid could penetrate the sealed parts and cause damage. • Do not spray a hot engine with cold water to avoid cracking the engine bl[...]
-
Página 283
PLASTIC (NON-PAINTED) EXTERIOR PARTS Use only approved products to clean plastic parts. These products are available from your authorized dealer . • For routine cleaning, use Motorcraft 威 Detail W ash (ZC-3-A). • If tar or grease spots are present, use Motorcraft 威 Bug and T ar Remover (ZC-42). WINDOWS AND WIPER BLADES The windshield, rear [...]
-
Página 284
INSTRUMENT PANEL/INTERIOR TRIM AND CLUSTER LENS Clean the instrument panel, interior trim areas and cluster lens with a clean, damp, white cotton cloth, then use a clean and dry white cotton cloth to dry these areas. • A void cleaners or polishes that increase the gloss of the upper portion of the instrument panel. The dull finish in this area he[...]
-
Página 285
• If grease or tar is present on the material, spot-clean the area first with Motorcraft 威 Spot and Stain Remover (ZC-14). In Canada, use Motorcraft 威 Multi-Purpose Cleaner (CXC-101). • If a ring forms on the fabric after spot cleaning, clean the entire area immediately (but do not oversaturate) or the ring will set. • Do not use househol[...]
-
Página 286
LEATHER SEATS FOR THE KING RANCH 姞 EDITION ONLY (IF EQUIPPED) Y our vehicle is equipped with seating covered in premium, top-grain leather which is extremely durable, but still requires special care and maintenance in order to ensure longevity and comfort. Regular cleaning and conditioning will maintain the appearance of the leather . Cleaning Fo[...]
-
Página 287
UNDERBODY Flush the complete underside of your vehicle frequently . Keep body and door drain holes free from packed dirt. FORD AND LINCOLN MERCURY CAR CARE PRODUCTS Y our Ford or Lincoln Mercury authorized dealer has many quality products available to clean your vehicle and protect its finishes. These quality products have been specifically enginee[...]
-
Página 288
SERVICE RECOMMENDATIONS T o help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy . If your vehicle requires professional service, your authorized dealer can provide the necessary parts and service. Check your W arranty Guide to find out which parts and services are covered. Use only r[...]
-
Página 289
W ARNING: T o reduce the risk of vehicle damage and/or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. OPENING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the instrument panel. 2. Raise the hood slightly . Then push the hood latch release [...]
-
Página 290
IDENTIFYING COMPONENTS IN THE ENGINE COMPARTMENT 1. Engine coolant reservoir 2. Engine oil filler cap 3. Battery 4. Brake/Clutch fluid reservoir 5. Power distribution box 6. W indshield washer fluid reservoir 7. Air filter assembly 8. Engine oil dipstick 8 7 6 5 1 2 3 4 Maintenance and Specifications 290 201 1 Fiesta (fie) Owners Guide, 1st Printin[...]
-
Página 291
WINDSHIELD WASHER FLUID Add fluid to fill the reservoir if the level is low . In very cold weather , do not fill the reservoir completely . Only use a washer fluid that meets Ford specifications. Do not use any special washer fluid such as windshield water repellent type fluid or bug wash. They may cause squeaking, chatter noise, streaking and smea[...]
-
Página 292
T o replace the wiper blades: 1. Pull the wiper arm away from the windshield. 2. Press the locking button (1). 3. Remove the wiper blade (2). Note: Make sure the wiper blade locks into place. ENGINE OIL Checking the engine oil Refer to the scheduled maintenance information for the appropriate intervals for checking the engine oil. 1. Make sure the [...]
-
Página 293
Adding engine oil 1. Check the engine oil. For instructions, refer to Checking the engine oil in this chapter . 2. If the engine oil level is not within the normal range, add only certified engine oil of the recommended viscosity . Remove the engine oil filler cap and use a funnel to pour the engine oil into the opening. 3. Recheck the engine oil l[...]
-
Página 294
Do not use supplemental engine oil additives, cleaners or other engine treatments. They are unnecessary and could lead to engine damage that is not covered by Ford warranty . Change your engine oil and filter according to the appropriate schedule listed in the scheduled maintenance information. Ford production and Motorcraft 威 replacement oil fil[...]
-
Página 295
W ARNING: Batteries normally produce explosive gases which can cause personal injury . Therefore, do not allow flames, sparks or lighted substances to come near the battery . When working near the battery , always shield your face and protect your eyes. Always provide proper ventilation. W ARNING: When lifting a plastic-cased battery , excessive pr[...]
-
Página 296
• If you do not allow the engine to relearn its idle trim, the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned. When the battery is disconnected or a new battery installed, the automatic transmission must relearn its adaptive strategy . As a result of this, the transmission may shift firmly when [...]
-
Página 297
• Proper function of calibrated gauges. When the engine is cold, check the level of the engine coolant in the reservoir . • The engine coolant should be at the FULL COLD level, or within the COLD FILL or MIN / MAX range as listed on the engine coolant reservoir (depending upon application). • Refer to scheduled maintenance information for ser[...]
-
Página 298
• DO NOT MIX different colors or types of coolant in your vehicle. Make sure the correct coolant is used. DO NOT MIX recycled coolant and new (unused) coolant together in the vehicle. Mixing of engine coolants may harm your engine’ s cooling system. The use of an improper coolant may harm engine and cooling system components and may void the wa[...]
-
Página 299
3. Step back while the pressure releases. 4. When you are sure that all the pressure has been released, use the cloth to turn it counterclockwise and remove the cap. 5. Fill the coolant reservoir slowly with the proper coolant mixture, to within the COLD FILL RANGE or the FULL COLD level on the reservoir . If you removed the radiator cap in an over[...]
-
Página 300
Severe climates If you drive in extremely cold climates (less than –34°F [–36°C]): • It may be necessary to increase the coolant concentration above 50%. • NEVER increase the coolant concentration above 60%. • A coolant concentration of 60% will provide freeze point protection down to -62°F [-52°C]. Increased engine coolant concentrat[...]
-
Página 301
If either lamp illuminates when the engine is running, this indicates a fault. The engine will continue to run, but it may have limited power . If it flashes when you are driving, reduce the speed of your vehicle immediately . If it continues to flash, avoid heavy acceleration or deceleration. Have the system checked by a properly trained technicia[...]
-
Página 302
Observe the following guidelines when handling automotive fuel: • Extinguish all smoking materials and any open flames before refueling your vehicle. • Always turn off the vehicle before refueling. • Automotive fuels can be harmful or fatal if swallowed. Fuel such as gasoline is highly toxic and if swallowed can cause death or permanent injur[...]
-
Página 303
Refueling W ARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries. T o help avoid injuries to you and others: • Read and follow all the instructions on the pump island; • T urn off your engine when you are refueling; • Do not smoke if you are near fuel or refueling your vehicle; • Keep sparks, flames and smoking mater[...]
-
Página 304
4. After you are done pumping fuel, slowly remove the fuel filler nozzle—allow about five seconds after pumping fuel before removing the fuel filler nozzle. This allows residual fuel to drain back into the fuel tank and not spill onto the vehicle. Note: A fuel spillage concern may occur if overfilling the fuel tank. Do not overfill the tank to th[...]
-
Página 305
Y our vehicle was not designed to use fuel or fuel additives with metallic compounds, including manganese-based additives. Note: Use of any fuel other than those recommended may cause powertrain damage, a loss of vehicle performance, and repairs may not be covered under warranty . Octane recommendations Y our vehicle is designed to use “Regular?[...]
-
Página 306
Cleaner air Ford endorses the use of reformulated “cleaner -burning” gasolines to improve air quality , per the recommendations in the Choosing the right fuel section. Running out of fuel A void running out of fuel because this situation may have an adverse effect on powertrain components. If you have run out of fuel: • Y ou may need to cycle[...]
-
Página 307
1. T o locate the white plastic funnel, lift the carpeted floor panel covering the spare tire in the rear of the vehicle. The funnel is visible in the foam pod on the spare tire. 2. Slowly insert the funnel into the Easy Fuel™ system. 3. Fill the vehicle with fuel from the portable fuel container . 4. When done, clean the funnel or properly dispo[...]
-
Página 308
vehicle after the fuel gauge indicates empty , you might not be able to refuel the full amount of the advertised capacity of the fuel tank due to the empty reserve still present in the tank. For consistent results when filling the fuel tank: • T urn the engine/ignition switch to the off position prior to refueling, an error in the reading will re[...]
-
Página 309
Habits • Smooth, moderate operation can yield up to 10% savings in fuel. • Steady speeds without stopping will usually give the best fuel economy . • Idling for long periods of time (greater than one minute) may waste fuel. • Anticipate stopping; slowing down may eliminate the need to stop. • Sudden or hard accelerations may reduce fuel e[...]
-
Página 310
• Adding certain accessories to your vehicle (for example bug deflectors, rollbars/light bars, running boards, ski/luggage racks) may reduce fuel economy . • Using fuel blended with alcohol may lower fuel economy . • Fuel economy may decrease with lower temperatures during the first 8–10 miles (12–16 km) of driving. • Driving on flat te[...]
-
Página 311
Illumination of the service engine soon indicator , charging system warning light or the temperature warning light, fluid leaks, strange odors, smoke or loss of engine power could indicate that the emission control system is not working properly . An improperly operating or damaged exhaust system may allow exhaust to enter the vehicle. Have a damag[...]
-
Página 312
electrical system dry out. After three driving cycles without these or any other temporary malfunctions present, the service engine soon indicator should stay off the next time the engine is started. A driving cycle consists of a cold engine startup followed by mixed city/highway driving. No additional vehicle service is required. If the service en[...]
-
Página 313
Allow the vehicle to sit for at least eight hours without starting the engine. Then, start the engine and complete the above driving cycle. The engine must warm up to its normal operating temperature. Once started, do not turn off the engine until the above driving cycle is complete. If the vehicle is still not ready for I/M testing, the above driv[...]
-
Página 314
Checking and adding manual transmission fluid (if equipped) 1. Clean the filler plug. 2. Remove the filler plug and inspect the fluid level. 3. Fluid level should be at the bottom of the opening. 4. Add enough fluid through the filler opening so that the fluid level is 5-10 mm below the bottom of the opening. 5. Install and tighten the fill plug se[...]
-
Página 315
6. Replace the air filter housing cover and install the screws. Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. V EHICLE STORAGE If you plan on storing your vehicle for an extended period of time (30 [...]
-
Página 316
• W ith your foot on the brake, shift through all the gears while the engine is running. Fuel system • Fill the fuel tank with high-quality fuel until the first automatic shutoff of the fuel pump nozzle. Note: During extended periods of vehicle storage (30 days or more), fuel may deteriorate due to oxidation. Add Motorcraft 威 Gas Stabilizer o[...]
-
Página 317
Removing vehicle from storage When your vehicle is ready to come out of storage, do the following: • W ash your vehicle to remove any dirt or grease film build-up on window surfaces. • Check windshield wipers for any deterioration. • Check under the hood for any foreign material that may have collected during storage (mice/squirrel nests). ?[...]
-
Página 318
MAINTENANCE PRODUCT SPECIFICATIONS AND CAPACITIES Item Capacity Ford Part Name or Equivalent Ford Part Number / Ford Specification Brake/Clutch fluid T op-off to MAX line on reservoir Motorcraft 威 High Performance DOT 3 Motor V ehicle Brake Fluid PM-1-C / WSS-M6C62-A or WSS-M6C65-A1 Door latch, hood latch, auxiliary hood latch, trunk latch, seat [...]
-
Página 319
Item Capacity Ford Part Name or Equivalent Ford Part Number / Ford Specification Engine oil 4.2 quarts (4.0L) (with filter change) • Motorcraft 威 SAE 5W -20 Premium Synthetic Blend Motor Oil (US) • Motorcraft 威 SAE 5W -20 Full Synthetic Motor Oil (US) • Motorcraft 威 SAE 5W -20 Super Premium Motor Oil (Canada) • Motorcraft 威 SAE 5W -[...]
-
Página 320
Item Capacity Ford Part Name or Equivalent Ford Part Number / Ford Specification W indshield washer fluid Fill as required Motorcraft 威 Premium W indshield W asher Concentrate (US) Premium Quality W indshield W asher Fluid (Canada) Motorcraft 威 Premium W indshield W asher Concentrate (US) Premium Quality W indshield W asher Fluid (Canada) Fuel [...]
-
Página 321
ENGINE DATA Engine 1.6L engine Cubic inches 97 Required fuel 87 octane Firing order 1–3–4–2 Ignition system Distributorless Ignition System (D.I.S.) Compression ratio 11:1 Spark plug gap .85 -.75 inch (0.8mm +/-0 .05mm ) Maintenance and Specifications 321 201 1 Fiesta (fie) Owners Guide, 1st Printing USA (fus)[...]
-
Página 322
Engine drivebelt routing IDENTIFYING YOUR VEHICLE Safety Compliance Certification Label The National Highway T raffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label i[...]
-
Página 323
V ehicle identification number (VIN) The vehicle identification number is located on the driver side instrument panel. Please note that in the graphic, XXXX is representative of your vehicle identification number . The V ehicle Identification Number (VIN) contains the following information: 1. W orld manufacturer identifier 2. Brake system / Gross [...]
-
Página 324
T RANSMISSION CODE DESIGNATIONS Y ou can find a transmission code on the Safety Compliance Certification Label. The following table tells you which transmission each code represents. Description Code Five-speed manual transmission C Six-speed automatic transmission A Maintenance and Specifications 324 201 1 Fiesta (fie) Owners Guide, 1st Printing U[...]
-
Página 325
FORD CUSTOM ACCESSORIES FOR YOUR VEHICLE A wide selection of Ford Custom Accessories are available for your vehicle through your local Ford or Ford of Canada dealer . These quality accessories have been specifically engineered to fulfill your automotive needs; they are custom designed to complement the style and aerodynamic appearance of your vehic[...]
-
Página 326
Peace of mind • Keyless entry keypad • Seat covers* • Remote start • W indshield wiper shaker* • Wheel locks • V ehicle tracking and recovery* • Back-up camera* • Bumper mounted parking sensors* *Ford Licensed Accessories (FLA) are warranted by the accessory manufacturer’ s warranty . Ford Licensed Accessories are fully designed a[...]
-
Página 327
FORD ESP EXTENDED SERVICE PLANS (U.S. ONLY) More than 30 million Ford, Lincoln, and Mercury owners have discovered the powerful protection of Ford ESP . It is the only extended service plan backed by Ford Motor Company , and provides “peace of mind” protection beyond the New V ehicle Limited W arranty coverage. Up to 500+ Covered V ehicle Compo[...]
-
Página 328
Ford ESP Can Quickly Pay for Itself One service bill – the cost of parts and labor – can easily exceed the price of your Ford ESP Service Contract. W ith Ford ESP , you minimize your risk for unexpected repair bills and rising repair costs. A void the rising cost of properly maintaining your vehicle! Ford ESP also offers a Premium Maintenance P[...]
-
Página 329
Ford Extended Service Plan 329 201 1 Fiesta (fie) Owners Guide, 1st Printing USA (fus)[...]
-
Página 330
FORD ESP EXTENDED SERVICE PLANS (CANADA ONLY) Y ou can get more protection for your vehicle by purchasing a Ford Extended Service Plan (ESP). Ford ESP is the only service contract backed by Ford Motor Company . Depending on the plan you purchase, Ford ESP provides benefits such as: • Rental reimbursement • Coverage for certain maintenance and w[...]
-
Página 331
GENERAL MAINTENANCE INFORMATION Why maintain your vehicle? This guide describes the scheduled maintenance required for your vehicle. Carefully following this schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may also help to increase the value of your vehicle when you sell or trade it. It is y[...]
-
Página 332
Ford strongly recommends the use of genuine Ford replacement parts. Parts other than Ford, Motorcraft 威 or Ford-authorized remanufactured parts that are used for maintenance replacement or for the service of components affecting emission control must be equivalent to genuine Ford Motor Company parts in performance and durability . It is the owner[...]
-
Página 333
Genuine Ford and Motorcraft 姞 replacement parts Ford and Lincoln Mercury dealerships stock Ford and Motorcraft 威 branded replacement parts. These parts meet or exceed Ford Motor Company’ s specifications, and we stand behind them. Parts installed at your Ford or Lincoln Mercury dealership carry a nationwide, 12 months, 12,000 mile (20,000 km)[...]
-
Página 334
Multi-point inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly . This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help ensure your ve[...]
-
Página 335
Be sure to ask your Ford or Lincoln Mercury dealership service advisor or technician about the multi-point vehicle inspection. It’ s a comprehensive way to perform a thorough inspection of your vehicle. It’ s your checklist that gives you immediate feedback on the overall condition of your vehicle. Y ou’ll know what’ s been checked, what’[...]
-
Página 336
Scheduled Maintenance Guide 336 201 1 Fiesta (fie) Owners Guide, 1st Printing USA (fus)[...]
-
Página 337
NORMAL SCHEDULED MAINTENANCE AND LOG The following section contains the “Normal Schedule”. This schedule is presented at specific mileage (kilometer) intervals with exceptions noted. Reset your oil life monitoring system after each engine oil and filter change; refer to the Instrument Cluster chapter . Scheduled Maintenance Guide 337 201 1 Fies[...]
-
Página 338
Miles (x 1,000) 10 20 30 40 50 60 70 80 90 100 Kilometers (x 1,000) 16 32 48 64 80 96 112 128 144 160 Months 12 24 36 48 60 72 84 96 108 120 Change engine oil and filter • ••••••••• Rotate tires, inspect tire wear and measure tread depth • ••••••••• Inspect the wheels and related components for abnormal noise[...]
-
Página 339
Miles (x 1000) 110 120 130 140 150 Kilometers (x 1000) 176 192 208 224 240 Months 132 144 156 168 180 Change engine oil and filter •• • • • Rotate tires, inspect tire wear and measure tread depth •• • • • Inspect the wheels and related components for abnormal noise, wear , looseness or drag •• • • • Perform multi-point[...]
-
Página 340
Every 20,000 miles (32,000 km) Replace cabin air filter (if equipped) Every 30,000 miles (48,000 km) Replace climate-controlled seat filter (if equipped) Replace engine air filter Every 100,000 miles (160,000 km) Change engine coolant 1 Replace spark plugs Inspect accessory drive belt(s) 2 Every 150,000 miles (240,000 km) Change automatic transmiss[...]
-
Página 341
Maintenance schedule log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H [...]
-
Página 342
D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : [...]
-
Página 343
D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : [...]
-
Página 344
SPECIAL OPERATING CONDITIONS If you operate your Ford/Lincoln/Mercury vehicle primarily in one of the more demanding Special Operating Conditions listed below , you will need to have some items maintained more frequently . If you only occasionally operate your vehicle under these conditions, it is not necessary to perform the additional maintenance[...]
-
Página 345
Operating in dusty conditions such as unpaved or dusty roads Every 5,000 miles (8,000 km) – Rotate tires, inspect tires for wear and measure tread depth. – Inspect the wheels and related components for abnormal noise, wear , looseness or drag. Every 5,000 miles (8,000 km) or 6 months – Change engine oil and replace oil filter . Every 30,000 m[...]
-
Página 346
Special operating condition log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : [...]
-
Página 347
D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : [...]
-
Página 348
EXCEPTIONS In addition, there are several exceptions to the Normal Schedule. They are listed below: Normal vehicle axle maintenance ❑ Rear axles and power take-off (PTO) units containing synthetic lubricant and light duty trucks equipped with Ford-design axles are lubricated for life. These lubricants are not to be checked or changed unless a lea[...]
-
Página 349
COOLANT CHANGE RECORD Engine coolant ❑ 6 years or 100,000 miles (160,000 km) - change coolant (whichever comes first). ❑ After initial change - change coolant every 3 years or 50,000 miles (80,000 km). Scheduled Maintenance Guide 349 201 1 Fiesta (fie) Owners Guide, 1st Printing USA (fus)[...]
-
Página 350
Engine coolant change log D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H OURS : D ATE :M ILEAGE : D EALER V ALIDATION : P&A C ODE : RO#: H[...]
-
Página 351
911 assist™ ................................. 65 A Accessing and using your USB port .............................................. 80 Accessing call history/phone book during active call ...............54 Accessing system settings ......... 82 Accessing vehicle applications ..82 Accessing your phone book ....... 56 Accessing your playlists .....[...]
-
Página 352
parking .................................... 236 shift interlock .......................... 240 Break-in period ............................. 5 Bulbs .......................................... 110 C Call history .................................. 55 Capacities for refilling fluids .... 318 Cell phone use .............................. 9 Changing a [...]
-
Página 353
Doors central unlocking .................... 132 Downloading unread text messages ...................................... 58 Driving under special conditions .................................. 245 through water ......................... 249 E Electronic message center ......... 18 Emergencies, roadside jump-starting .......................... 266 ru[...]
-
Página 354
daytime running lights ...........106 high beam ............................... 105 replacing bulbs ....................... 111 turning on and off .................. 105 Heating heating and air conditioning system ..................................... 102 Hood .......................................... 289 I Ignition ....................... 227, 32[...]
-
Página 355
automatic dimming rearview mirror ...................................... 124 heated ...................................... 125 side view mirrors (power) .....125 signal ....................................... 126 Modifying your phone book .......60 Moon roof .................................. 128 Motorcraft 威 parts ..............287, 317 O Octane[...]
-
Página 356
Safety restraints ........... 151, 154–157, 159 Belt-Minder 威 ........................... 160 extension assembly ................ 158 for adults ......................... 155, 157 for children ............................. 180 Occupant Classification Sensor ...................................... 152 warning light and chime .....................[...]
-
Página 357
replacing .................................. 205 rotating .................................... 207 safety practices ....................... 206 sidewall information ...............208 snow tires and chains ............ 219 spare tire ................................. 260 terminology ............................. 200 tire grades ....................[...]