Fortec FS-4300 manual

[...]

GENERAL INFORMA TION INSTALLATION MENU INFORMA TION 3 7 9 Main Features For your Safety Unpacking General Operation RCU 3 4 5 5 6 Rear Panel Connecting to TV& VCR using SCART support Connecting to TV using RCA support Connecting to Digital Amplifier 7 7 8 8 Main Menu 1. Channel List 1.1 TV Channel List 1.2 Radio Channel List 1.3 Delete All 1.4 [...]

4. T ools 4.1 Information 4.2 Factory Setting 5. Game 6. Hot key 6.1 Info 6.2 EPG 6.3 Find 6.4 Number 6.5 TV/Radio 6.6 Up/Down 6.7 Left/Right 6.8 Mute 6.9 Pause 6.10 OK 6.11 Audio 6.12 Recall 6.13 Fav 6.14 T eletext 6.15 Zoom 23 24 24 24 25 25 25 26 26 26 26 26 26 26 26 27 27 27 27 27 TROUBLE SHOOTING 28[...]

[...]

A Digital Satellite Receiver is a convenient product that allows you to view a variety of programs provided through satellite. This user's guide covers the installation of the DSR and the necessary steps to implement various features. This also explains special features available only in this DSR in detail, which will allow you to make full of[...]

For Y our Safety Be sure to turn the Receiver off and disconnect the AC power cord before cleaning the Receiver surface. If the surface is dirty, wipe clean with a cloth which has been dipped in a weak soap-and- water solution and wrung out thoroughly, and then wipe again with a dry cloth. Switch the receiver off whenever it remains out of service [...]

General Operation Throughout this manual you will notice that the everyday operation of the receiver is based on a series of user friendly on screen display and menus. These menus will help you get the most from your receiver, guiding you through installation, channel organizing, viewing and many other functions. All function can be carried out usi[...]

RCU Key Function Turns power ON/OFF of the DSR When watching a channel, mute the sound Switches between TV and Radio mode 0~9 MENU EXIT OK, LIST PR+, PR- Enter number of the required menu item or select a channel number to watch Press this key one time to run menu onscreen Return to the previous menu on the menu screen or escape from the menu Press[...]

Rear Panel Rear Panel Connecting to TV using SCART support DSR IN Satellite Dish LNB IN: CONNECT TO SA TELLITE ANTENNA LNB OUT :CONNECT TO THE OTHER RECEIVER RF OUT : CONNECT TO TV ANT INPUT CONNECT TO 12V TO AN EXTERNAL 0/12V SWITCH POWER ON/OFF CONNECT TO TV AND VCR USING A SCART CABLE CONNECT VIDEO TO TV USING RCA JACK CONNECT TO A DIGITAL AMPLI[...]

Connecting to TV using RCA support L R IN VIDEO TV AUDIO DSR Satellite Dish Connecting to Digital Amplifier Satellite Dish DIGITAL AUDIO CONVERTOR OR AMPLIFIER SPEAKER DIGITAL AUDIO L R[...]

Main Menu This menu consists of 5 major main menus as follow. - Edit Channel - Installation - System Setup - T ools - Game During the installation the OK key confirms a selection and LIST key shows Down List Box if the column has mark. Y ou can also use the numeric keys on the RCU to enter numeric value. Use the PR+ , PR- key to move upwards and do[...]

If there is no program, you can not exit from the Main Menu window by pressing MENU or EXIT key. System will inform "No channel" and the following items turn grey . 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is &quo[...]

3. Press FAV key to move the FA V button upward. Select the program and press OK key to pop up the favourite group list. In the list, select the group that you want to add into and press OK key, and then you will find the favourite mark is displayed at the right side of the selected program. Press FAV key again to exit from the fav mode, and you wi[...]

Press red colour key to pop up the Sort drop-down list. Name(A-Z): The ascending order, omitting the $ character, the number is ahead, then the capital letter, at last the lowercase. Name (Z-A): The opposite order of the above Name (A-Z). Free/Scramble:: All FT A programs are listed ahead, while all scrambled programs are listed last. Lock: all loc[...]

In Delete window, press blue colour key to move the Delete button upward. Select the program and press OK key to mark this program with the deletion mark. You can cancel this mark by pressing OK key again. Press EXIT key to pop up the dialogue "Are you sure to save?". Select Yes button and press OK key to save, or select NO button and pre[...]

2. Installation 1. Press OK key or key to pop up the "Input Password" dialogue, you can not enter into the menu unless the correct password is inputted. The default password is "0000". 2. Press PR+, PR- keys to move the cursor up or down. 3. Press EXIT key or key to move the focus to the left menu. 2.1 Antenna Connection Press k[...]

4. Press green colour key to pop up the Add Satellite window. Since the same operation as the above Edit Satellite window, here we don't explain any more. 5. Press blue colour key to pop up the dialogue "Are you sure to delete?". Select Yes button and press OK key to delete the selected satellite. You can cancel this operation by pre[...]

Part B : Motor Suppose that you have selected Moter Antenna in the Antenna Connection window. 1. LNB T ype: Select the proper LNB type. 2. Motor T ype: Select between DiSEqC1.2 and USALS. If you select DiSEqC1.2, the following Local Longitude and Local Latitude items will turn grey. 3. Delete All: Press OK key to pop up the dialogue "Are you s[...]

5. Limit Setup: Press OK key to pop up the Limit Setup window. Limit Setup: Press keys to switch among Disable Limit, East Limit and West Limit. Limit Setup: Move cursor to the Limit Setup button. Y ou can press key to turn west , or press key to turn east. Go to Reference: Press OK key to go to reference. If you select Disable Limit in the above L[...]

2.4 Single Satellite Search 1. Satellite : 2. FT A Only: Press keys to select between Y es and No. 3. Scan Channel: Press keys to select among TV+Radio, TV Channel, Radio. Press keys to select the satellite in circle. Or press OK key to pop up the drop-down list, then select the desired satellite in the list and press OK key to confirm. 2.5 Multi S[...]

2.6 TP List 1. Press PR+,PR- keys to select the proper satellite. 2. Press red colour key to pop up the Edit TP window. Frequency, Symbol rate: Press keys to add or reduce by step one. Or press numeric keys (0-9) to input the desired value. The range of the frequency is 3000- 13450, while the range of the symbol rate is 1000~45000. The inputted val[...]

5. Press blue colour key to pop up the TP Search window. FTA only, Scan Channel, Network Search: Press keys to select the proper option. Press OK key at the OK button to start searching. 1. Press OK key to enter into the Language window. Press keys to select the language in circle, while press PR+, PR- keys to move the cursor up or down in circle. [...]

1. Summer T ime: Select between ON and OFF. "OFF" delegates the normal time. If select ON, time will add one hour. 2. GMT Offset: When select "ON" in GMT Usage item, system will get the date and time information from the screen automatically . Date and Time two items will turn grey. Select the proper option in the GMT Offset ite[...]

Before entering into the Parental Lock window, you need input the correct password. The default password is 0000. 1. Menu Lock: Press keys to select between Off and On. If select "On" , you can not enter into the most window before entering the password. 2. Channel Lock: Press keys to select between Off and On. The default value is Off. 3[...]

There are 32 favorites group listed in this window. Press PR+, PR- keys to select one and press OK key to the Rename window. Since the same operation as the above the Add Satellite window, here we don't explain any more. 3.7 Favorite 3.8 Other 1. LNB Power: Select between Of f and On. 2. Channel Play Type: Select among All, Free, Scramble. 3. [...]

4.2 Factory Setting Press OK key to enter into the Factory Setting window. Select Y es button and press OK key to return to the factory setting. All searched channels and set information will be erased. Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit. 4.1 Information Press OK key to the Infor[...]

Press INFO key to pop up the Info bar. Press INFO key again to pop up the program guide of the current program. You can press keys to know the program guide of the future 16 days. 6. Hot Key Press EPG key to enter into the EPG window. 1. Press PR+, PR-, keys to select up or down, left or right. 2. Press red colour key to pop up the Time Bar window.[...]

26 Press A-Z key on to pop up the Find window. User numeric keys to enter into the character and use the colour keys to realized the corresponding operation. 6.3 Find Use the numeric keys (0-9) to input the number of the desired channel. If the inputted 6.4 Number In normal mode, press TV/RADIO key to switch between TV mode and Radio mode. 6.5 TV/R[...]

1. Press keys to enter into the Audio window. 2. Press keys to select among Left, Right, Stereo, and Mono. 3. Changing the audio mode is only connected with the current channel, not all the channels. 4. Press MENU or EXIT key to close this window. 6.11 Audio Press key to switch the current channel to the previous channel. 6.12 Recall 1. Press ZOOM [...]

Problem Possible causes What to do The display on the front panel does not light up. No sound or picture, but the front panel shows red light. Main cable is not connected. The is in standby mode. receiver Check that the main cable is plugged into the power socket. Press the standby button. No sound or picture. The satellite dish is not pointing at [...]