Fujitsu A20W-3 manual

Monitor Operating Manual English SCENICVIEW A20W-3/A22W-3[...]

Are there… ... any technical problems or other questions which y ou would like to be clarified? Please contact our help desk (see Warranty Booklet). The latest information on our products, tips, updates, etc., can be found on the internet under: http://www.fujitsu-siemens.com[...]

[...]

Published by Fujitsu Siemens Computers GmbH Order No.: A 26361-K1177-Z120-1-7619 Edition 1 AG 06/07[...]

SCENICVIEW A20W-3/A22W-3 LCD monitor Operating Manual Juni 2007 edition[...]

VESA, DDC and DPMS are registered tradem arks of Video Electronics Standards Association. Copyright © Fujitsu Siemens Computers GmbH 2007 All rights, including rights of translation, reproduc tion by printing, copying or similar methods, in part or in whole, are reserved. Offenders will be liable for damages. All rights, including rights created b[...]

Contents Introduction ........................................................................................................................................... 1 Notational conventions ......................................................................................................... ........ 2 Important notes...............................[...]

Contents A26361-K1177-Z120-1-7619, edition 1[...]

Introduction Your new LCD (Liquid Cry stal Display) monito r SCENICVIEW A20W-3/A22W-3 offers numerous features and functions, for example: ● TFT display (Thin Film Transistor; ac tive matrix) ● minimal space requirements thanks to slim casing ● optimum ergonomic characteristics (totally distor tion-free, excellent picture definition and colou[...]

SCENICVIEW A20W-3/A22W-3 Notational conventions The meanings of the symbols and fonts used in this manual are as follows: Pay particular attention to text marked with th is symbol. Failure to observe this w arning endangers your life, destroys the device, or may lead to loss of data. ! i Supplementary information, remarks, and tips follow this sy m[...]

SCENICVIEW A20W-3/A22W-3 ● No data transfer cables should be connected or disconnec ted during a thunderstorm. ● Make sure that no objects (e.g. jewellery chai ns, paper clips, etc.) or liquids get inside the device (danger of electric shock, short circuit). ● The device is not waterproof! Never immerse the device in water and protect it from[...]

SCENICVIEW A20W-3/A22W-3 Power cable To guarantee safe operation, use the cable supplied. Us e the following guidelines if it is necessary to replace the original cable set. ● The female/male receptacles of the cord set must meet IEC60320/CEE-22 requirements. ● The cable has to be HAR-certified or VDE-ce rtified. The mark HAR or VDE will appear[...]

SCENICVIEW A20W-3/A22W-3 FCC Class B Compliance Statement The following statement applies to the products covered in this manual, unless otherwise specified herein. The statement for other products w ill appear in the accompanying documentation. NOTE: This equipment has been tested and found to comply with the limits for a "Class B" digit[...]

SCENICVIEW A20W-3/A22W-3 Energy Star Guidelines The Fujitsu Siemens LCD monitor SCENICVIEW A20W-3/A22W-3 is designed to conserve electricity by dropping to less than 1 W when it goes into standby, suspend and OFF mode. With this new power management the LCD monitor SCENICVIEW A20W-3/A22W-3 qualifies for the U.S. Environmental Protection Agency&apos[...]

SCENICVIEW A20W-3/A22W-3 Checking the contents of the consignment The display surface of the LCD monitor is sensitive to pressure and scratches. Always hold the device by the casing! ! ► Unpack all the individual parts. ► Check the delivery for damage incurred during transportation. ► Check whether the delivery agrees with the details in the [...]

SCENICVIEW A20W-3/A22W-3 Installing an ergonomic video workstation 1 1 2 1 = Windows Avoid direct and re flected glare. Avoid glare from electric lighting. 1 = Edge of desk 2 = Permissible reaching sector Position the keyboard where it is easiest to reach. 30° 30° 65° 65° 0° 60° 1 2 2 1 = Bearing surface for palms of hands 2 = Reaching area f[...]

SCENICVIEW A20W-3/A22W-3 Mounting and removing the monitor base Mounting monitor base The display surface is susceptible to scrat ching! Therefore, lay the monitor on a soft surface when mounting or re moving the monitor base. ! A26361-K1177-Z120-1-7619, edition 1 9[...]

SCENICVIEW A20W-3/A22W-3 Removing monitor base Before you can use a swivel arm or a w all bracket, you must remove the monitor base: ! The display surface is susceptible to scratching! ► Switch off the monitor and pull the power plug out of the pow er socket. ► Lay the monitor on its face on a soft surface. ► Remove the screws on the rear of [...]

SCENICVIEW A20W-3/A22W-3 Connecting the monitor ! Please take note of the safety information in the " Important notes " chapter. CE conformance and optimum picture qualit y are guaranteed only if y ou use the data cables supplied. Do not cover the ventilati on openings of the monitor. The computer power plug must be pulled out! ► Be sur[...]

SCENICVIEW A20W-3/A22W-3 ► Mount the cover over the connections. A lock (Kensington Lock) can be mounted in the se curity slot (4) to protect the monitor from theft. A Kensington Lock is not incl uded in the consignment of the monitor. i Connecting cables to the computer Information on the computer connec tions and interfaces is contained in the [...]

SCENICVIEW A20W-3/A22W-3 Operation of the monitor The monitor offers the following possibilities that enable it to be optimally adjusted for the respective user and the respec tive situation. Adjusting rake The rake of the monitor can be adjusted by –5° (for ward) and +20° (back) from its vertical position. ► Grasp the monitor with both hands[...]

SCENICVIEW A20W-3/A22W-3 The power indicator (2) lights up blue when the m onitor and computer are switched on. The pow er indicator lights up orange when the m onitor does not receive a video signal or is in the energy saving mode. The power indicator goes off when the monitor is switched off. When you switch the computer sy stem on, you must proc[...]

SCENICVIEW A20W-3/A22W-3 Changing the monitor settings When putting the monitor into operation for the fi rst time, the screen display should be optimally adapted to the screen controller used and adjus ted in accordance with your needs. Choosing basic monitor settings using the supplied softw are If one of the operating systems Windows 95/98, Wind[...]

SCENICVIEW A20W-3/A22W-3 Locking the OSD menu The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings. ► Press and hold the SELECT/MENU button for a few seconds while y ou switch on the monitor with the ON/OFF switch. A message is displayed that the action has been performed. Please proceed in the same man[...]

SCENICVIEW A20W-3/A22W-3 The corresponding setting window (here: Image Adjust ) is display ed (on the right-hand side). The first function ( H-Position ) is highlighted. ► If necessary, press the 6 or 5 button to mark another function. ► Press the SELECT/MENU button to select the highlighted function. ► Press the 6 or 5 button to adjust the v[...]

SCENICVIEW A20W-3/A22W-3 Adjusting size and position Calling the Image adjust setting window H-Position Adjusting the horizontal position With this function you move the pi cture to the left or to the right. V-Position Adjusting the vertical position With this function you move the picture up or down. Clock Setting synchronisation With this functio[...]

SCENICVIEW A20W-3/A22W-3 Setting display of the OSD menu Calling the OSD Setup setting window Language Setting language for the OSD menu With this function you choose between E nglish (default setting), French, German, Italian, Spanish, Russian, Dutch and Swedi sh as the language for the OSD menu. OSD H-Position Setting the horizontal pos ition of [...]

SCENICVIEW A20W-3/A22W-3 Notes on ergonomic colour adjustment If you select colours for the display in y our app lication programmes, take note of the information below. The primary colours blue and red on a dark background do not produce the minimum required contrast of 3:1 and are therefore not su itable for continuous text and data entry. When u[...]

SCENICVIEW A20W-3/A22W-3 Troubleshooting Should an error occur, first check the following point s. If the distortion is still not eliminated, the monitor should, if possible, be checked on another computer. If you are unable to solve the probl em, please inform our help desk. Having this problem? Check the following points: No screen display (power[...]

SCENICVIEW A20W-3/A22W-3 Having this problem? Check the following points: Picture is wrongly adjusted ► Press the SELECT/MENU button to activate the function Factory Recall . The Auto Processing message is displayed. Picture disturbances (vertical lines) ► Press the EXIT/AUTO button to perform the auto- adjustment of the screen. Picture disturb[...]

SCENICVIEW A20W-3/A22W-3 Notes regarding the DIN EN ISO 13406-2 standard Permanently unlit or lit pixels The standard of production tec hniques today cannot guarantee an absolutely fault-free screen display. A few isolated constant lit or unlit pixe ls (picture elements) may be present. The maximum permitted number of pixels faults is stipulated in[...]

SCENICVIEW A20W-3/A22W-3 Technical data A20W-3 A 22W-3 Dimensions and weight Visible diagonals: 51 cm 56 cm Dot pitch: 0,28 mm 0,28 mm Screen size: Width: Height: 435.01 mm 272.47 mm 475.36 mm 297.70 mm Maximal resolution: 1680 x 1050 1680 x 1050 Dimensions incl. monitor base: Box dimensions: Width: Height: Depth: Width: Height: Depth: 472.89 mm 40[...]

SCENICVIEW A20W-3/A22W-3 Environmental conditions Environment class 3K2, IEC 721 Rated range of operation: Humidity: 15 °C .... 35 °C 20 % .... 85 % Limit range of operation: Humidity: 5 °C .... 35 °C 20 % .... 85 % Condensation must be avoided. VESA-DDC-compatible VGA interface Your monitor is equipped with a VESA-DDC-compatible VGA interface.[...]

SCENICVIEW A20W-3/A22W-3 Pin assignment D-SUB 1 5 6 10 11 15 Pin Meaning Pin Meaning 1 Video input red 9 +5 V (DDC) 2 Video input green 10 Sync. earth 3 Video input blue 11 Earth 4 Earth 12 DDC-Data 5 Earth 13 H. sync 6 Red video earth 14 V. sync 7 Green video earth 15 DDC Clock 8 Blue video earth 26 A26361-K1177-Z120-1-7619, edition 1[...]