Fujitsu SPARC M3000 manual

[...]

[...]

C120-E360-06EN SP ARC ® Enterprise M3000/M4000/M5000/M8000/M9000 Servers RCI User ’ s Guide[...]

[...]

C120-E360-06EN Please Recycle Copyright 2007-2008 FUJITSU LIMITED, 1-1, Ka mikodanaka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 21 1-8588, Japan. All rights reserved. Sun Micr osystems , Inc. provi ded techni cal in put and review on portions of this material. Sun Microsystems, Inc. and Fujitsu Limited each own or contro l intellectual prope[...]

C120-E360-06EN Copyright 2007-2008 FUJITSU LIMITED, 1-1, Kamikodan aka 4-chome, Nakahara-ku, Kawasaki-shi, Kanagawa-ken 21 1-8588, Japon. T ous droits réservés. Entrée et revue tecnical fourni es par Sun Microsystems, Incl sur des parties de ce matériel. Sun Microsystems, Inc. et Fujitsu Limited détiennent et contrôlent toutes deux des dr oit[...]

C120-E360-06EN i Preface 1 This manual describes the Remote Cabi net Interface (RCI) function on SP ARC ® Enterprise series server s. This manual is intended for users, specifically system management/maintenance administrators . However , when carrying out actual operations, authorized service personnels do it. Be sure to also read the SP ARC Ente[...]

ii C120-E360-06EN Preface CHAPTER 1 RCI Ove rview This chapter gives an overview of the Remote Cabinet Interface (RCI) . CHAPTER 2 Setup of the RCI for Operation This chapter describes setup in formation for use of the RCI. CHAPTER 3 Co mmand Reference This chapter describes the RCI command. CHAPTER 4 Error S tatus This chapter describes the error [...]

C120-E360-06EN iii Preface SP ARC Enterprise Mx000 Servers Document ation The manuals listed below ar e provided for reference. Book T itles Manual Codes SP ARC Enterprise M3000 Server Site Planning Guide C120-H030 SP ARC Enterprise M4000/M5000 Servers Site Planning Guide C120-H015 SP ARC Enterprise M8000/M9000 Servers Site Planning Guide C120-H014[...]

iv C120-E360-06EN Preface 1 Manuals on the W eb The latest versions of all the SP ARC Ente rprise Series manuals are available at the following websites. Global Site http://www.fujitsu.com/sparcenter prise/manual/ Japanese Site http://primeserver.fujitsu.com/sp arcenterprise/manual/ Note: Product Notes is available on the website only . Please chec[...]

C120-E360-06EN v Preface 1 Message Global Site http://www.fujitsu.com/sparcenter prise/msg/ Japanese Site http://primeserver.fujitsu.com/sp arcenterprise/msg/ 2 Firmware program Y ou can download the latest files of firmware at the following websites. Global Site http://www.fujitsu.com/sparcenter prise/firmware/ Japanese Site http://primeserver.fuj[...]

vi C120-E360-06EN Preface Abbreviated References to Other Document s In this manual, the following abbreviated titles may be used when referring to a systems manual. The following table lists the abbreviations used in this manual. Models The model names used in this manual are as follows. T ext Conventions This manual uses the following fonts a nd [...]

C120-E360-06EN vii Preface Prompt Not ations The prompt notations used in this manual are as follows Synt ax of the Command-Line Interface (CLI) The command syntax is described below . Command synt ax The command syntax is as follows: z A variable that requires input of a value must be enclosed in <>. z An optional element must be enclosed in[...]

viii C120-E360-06EN z The command syntax is shown in a box. Example: Fujit su W elcomes Y our Comments If you have any comments or requests regarding this manual, or if you find any unclear statements in the ma nual, please state your points sp ecifically on the form at the following URL. For Users in U.S.A., Canada, and Mexico: http://www.computer[...]

C120-E360-06EN ix Content s Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i CHAPTER 1 RCI Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 RCI Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-[...]

x C120-E360-06EN Conten ts 2.4.4 Making an RCI address setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 T o specify an RCI address: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 T o confirm the specified RCI address: . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 2.4.5 Making an RCI expansio[...]

C120-E360-06EN xi Contents EXTENDED DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-9 EXAMPLES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 EXIT ST A TUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-10 CHAPTER 4 Error Status [...]

[...]

C120-E360-06EN xiii Contents Figures Figure 1.1 Connections to RCI I/O unit s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-4 Figure 1.2 Cluster connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-5 Figure 1.3 Duplicated configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

[...]

C120-E360-06EN 1-1 CHAPTER 1 RCI Overview 1 This chapter gives an overview of the Remote Cabinet Interface (RCI). 1.1 RCI Features The RCI is a device control interface used for connections of I/O units to an RCI host. In this manual, a base cabinet and an I/O uni t that support the RCI are referred to as an RCI host and an RCI I/O unit (Note), res[...]

1-2 C120-E360-06EN CHAPTER 1 RCI Overview • RCI redundancy (only fo r the high-end system) The eXtended System Control Facility (XSCF) unit (Note) of the high-end system has a redundant configuration (duplicated conf iguration), realizing a high-reliability system. The redundant configur ation of the XSCF unit can duplicate a network (RCI network[...]

C120-E360-06EN 1-3 1.2 RCI Functions • Facility control Different kinds of facility control are avai lable wh en the external power controller is connected to the RCI. The external power controller ca n link with the customer's existing facilities, power on each unit, recog nize alarms of each unit, use the operator call function through a c[...]

1-4 C120-E360-06EN CHAPTER 1 RCI Overview 1.3 RCI Connection Scheme This section outlines RCI connection patterns. • Basic configuration Figure 1.1 shows a connection pattern with an RCI host and RCI I/O units. Figure 1.1 Connections to RCI I/O units RCI cables are connected in sequence to re spective units using T -branch connectors. RCI termina[...]

C120-E360-06EN 1-5 1.3 RCI Connection Scheme • Cluster configuration Figure 1.2 shows a cluster connection pattern. Figure 1.2 Cluster connections Up to 32 RCI hosts can be connected. The cluster connection requi rements, such as the maximum cable length and the number of connectable RCI I/O units, are the same as the basic configuration requirem[...]

1-6 C120-E360-06EN CHAPTER 1 RCI Overview Figure 1.4 shows a connection pattern that c onnects both duplicated and unduplicated configurations. Figure 1.4 Mixture of duplicated and unduplicated configurations The pattern can contain RCI I/O units and RCI hosts that do not support a duplicated configuration. Connect them to the duplicate system. Con[...]

C120-E360-06EN 2-1 CHAPTER 2 Setup of the RCI for Operation 1 This chapter describes setup information for use of the RCI. 2.1 Overview of RCI Setup The RCI can be set up as follows. Note: RCI setup as explained in this chap ter is carried out by authorized service personnel. z Prepare a serially-connected PC or a PC connected to the XSCF-LAN, spec[...]

2-2 C120-E360-06EN CHAPTER 2 Setup of the RCI for Operation 2.2 RCI Setup for Initial Inst allation This section explains the procedure for initial RCI setup, which assumes RCI settings have not been configured. Note: Perform this work when this system is not using any RCI I/O unit. 2.2.1 RCI setup flow RCI setup for initial installa tion contains [...]

C120-E360-06EN 2-3 2.2 RCI Setup for Initial Instal lation 2.2.3 Connecting RCI cables Connect RCI cables. Connect RCI units in sequence with RCI cables and their T -branch connectors. Connect RCI terminating resistors to the T -br anch connectors at both ends of a set of RCI connections. 2.2.4 Making an RCI address setting Specify "000101ff&q[...]

2-4 C120-E360-06EN CHAPTER 2 Setup of the RCI for Operation Note: T o make an RCI cons truction setting for an RCI unit equipped with a main line switch, set the main li ne switch to the ON position. • T o make an RCI c onstruction setting: 1 Execute the setrci (8) command, and make an RCI cons truction setting. • T o confirm an RCI co n struct[...]

C120-E360-06EN 2-5 2.3 RCI Setup for Additi on of an RCI I /O Unit 2.3.2 Connecting an RCI cable 1 Insert a T -branch connector and an RCI cable into the existing set of connections of RCI cables. 2 Connect the T -branch connector to the RCI I/O unit to be added. 2.3.3 Making an RCI exp ansion setting The added RCI I/O unit must be connected to the[...]

2-6 C120-E360-06EN CHAPTER 2 Setup of the RCI for Operation 2.4 RCI Setup for Addition of an RCI Base Cabinet 2.4.1 RCI setup flow RCI setup for addition of an RCI host contains the following steps: 1 Confirming RCI initialization 2 Connecting an RCI cable 3 Making an RCI address setting 4 Making an RCI expansion setting 2.4.2 Confirming RCI initia[...]

C120-E360-06EN 2-7 2.4 RCI Setup for Addition of an RCI Base Cabinet 2 Connect the T -branch connector to the RCI host to be added. Note: Always do Confirming RCI initialization before connecting an RCI cable to the RCI host. 2.4.4 Making an RCI address setting Specify an RCI addresses in a range of 000102ff to 000120f f for the RCI host to be adde[...]

2-8 C120-E360-06EN CHAPTER 2 Setup of the RCI for Operation 2.4.5 Making an RCI exp ansion setting The added RCI host must be c onnected to the RCI network. The RCI address of the added RCI host is synchronized with those of existing RCI hosts so that the added cabinet can use RCI functions. Make an RCI expansion setting on the added RCI host. Note[...]

C120-E360-06EN 2-9 2.5 RCI Setup for Replac ement of an RCI I /O Unit 2.5 RCI Setup for Replacement of an RCI I/O Unit 2.5.1 RCI setup flow RCI setup for replacement of an RCI I/ O unit contains the following steps: 1 Confirming an RCI address 2 Replacing an RCI I/O Unit 3 Making an RCI replacement setting Note: Perform this RCI setup work fo r eac[...]

2-10 C120-E360-06EN CHAPTER 2 Setup of the RCI for Operation 3 Execute the setrci (8) command to di splay a list of connected RCI units. On the list, "INACT" is displayed in the "I/F" column of the RCI I/O unit that cannot make a transmission to the RCI. • T o confirm the location of an RCI I/O unit: If the RCI address of the [...]

C120-E360-06EN 2-1 1 2.5 RCI Setup for Replac ement of an RCI I /O Unit 2.5.4 Making an RCI replacement setting The added RCI I/O unit must be connected to the RCI network. The RCI address of the added RCI I/O unit is synchronized with that of an existing RCI host so that the unit can use RCI functions. An RCI expansion setting can be made only onc[...]

2-12 C120-E360-06EN CHAPTER 2 Setup of the RCI for Operation 2.6 RCI Setup for Replacement of an RCI Base Cabinet 2.6.1 RCI setup flow RCI setup for replacement of an RCI host contains the following steps: 1 Replacing an RCI host 2 Confirming RCI initialization 3 Connecting an RCI cable 4 Making an RCI address setting 5 Making an RCI replacement se[...]

C120-E360-06EN 2-13 2.6 RCI Setup for Re placement of an RCI Base Cabinet 2 Execute the setrci (8) comma nd to initialize RCI settings. 2.6.4 Connecting an RCI cable Connect the removed T -branch connector together with th e RCI cable to the new RCI host. Note: Always do Confirming RCI initialization before reconnecting the RCI cable to the RCI hos[...]

2-14 C120-E360-06EN CHAPTER 2 Setup of the RCI for Operation • T o confirm the spec ified RCI address: 1 Execute the setrci (8) command to display the RCI status. Confirm that the "address" value is correct. T o correct the RCI address, star t again f rom RCI initialization. 2.6.6 Making an RCI replacement setting The new RCI host must [...]

C120-E360-06EN 2-15 2.6 RCI Setup for Re placement of an RCI Base Cabinet • T o confirm an RCI r eplacement setting: 1 Execute the setrci (8) comma nd to display the RCI status. Confirm that the displaye d LIST contents include the replacement RCI host. For details on LIST contents, see Chapter 3, "Command Reference." XSCF> setrci -c[...]

[...]

C120-E360-06EN 3-1 CHAPTER 3 Command Reference 1 3.1 setrci •N A M E setrci - configure or display the environm ent of the remote cabinet interface (RCI) •S Y N O P S I S setrci -c stat setrci -c init [-s RCI_network] setrci -c set host_no setrci -c initconfig [ -s RCI_network ] setrci -c addconfig [-s RCI_network ] setrci -c replaceconfig [ RC[...]

3-2 C120-E360-06EN CHAPTER 3 Command Reference •P R I V I L E G E S Y ou must have platadm or fieldeng privileges to run this command. Refer to setprivileges(8) for more information. •O P T I O N S The following options are supported: addconfig Adds an RCI I/O unit or host. When an RCI I/O unit is added, the RCI I/O unit newly connected to RCI [...]

C120-E360-06EN 3-3 3.1 setrci •O P E R A N D S The following operands are supported: • EXTENDED DESCRIP TION z When "-c stat" is specified, the following states are displayed: z When the RCI state is Active, the follow ing information is displayed after List: -c idpin Displays the RCI address of the RCI I/O unit whose ID-PIN has been [...]

3-4 C120-E360-06EN CHAPTER 3 Command Reference I/F RCI unit interface status. ACT V alid state. INACT Invalid state. sys-phase Operating state of the host connected to RCI. One of the followi ng is displayed: power-of f Powered off. panic In the panic s tate. shdwn-start Shutdown in progress. shdwn-cmplt Shutdown has com pleted. dump-cmplt Dump has[...]

C120-E360-06EN 3-5 3.1 setrci • EXAMPLES EXAMPLE 1: Makes the fi rst RCI setting on the first host in an M3000/M4000/ M5000 server .[...]

3-6 C120-E360-06EN CHAPTER 3 Command Reference XSCF> setrci -c init RCI-0 .......... The command completed successfully . RCI-1 .......... The command completed successfully. XSCF> setrci -c set 1 RCI-0 .......... The command completed successfully. RCI-1 .......... The command completed successfully . XSCF> setrci -c initconfig RCI-0 ....[...]

C120-E360-06EN 3-7 3.1 setrci EXAMPLE 2: Makes the first RCI sett ing on the first host in an M8000/M9000 server . •E X I T S T A T U S The following exit values are returned: XSCF> setrci -c init .......... The command completed successful ly. XSCF> setrci -c set 1 .......... The command completed successful ly. XSCF> setrci -c initconf[...]

3-8 C120-E360-06EN CHAPTER 3 Command Reference 3.2 setrcic •N A M E setrcic - make the setting of an external power control device or display its status. • SYNOPSIS setrcic -c exrdy RCI_addr ess [ time ] setrcic -c opcalldisp RCI_addr ess setrcic -c opcallon RCI_addr ess callNo setrcic -c opcallof f RCI_addr ess callNo setrcic -h • DESCRIPTIO[...]

C120-E360-06EN 3-9 3.2 set rcic •O P T I O N S The following options are supported: •O P E R A N D S The following operands are supported: • EXTENDED DESCRIP TION z When the setrci(8) command or setrcic( 8) command is being executed on another host in the RCI network, do not execute the setrcic(8) command. z When the setrcic(8) command is exe[...]

3-10 C120-E360-06EN CHAPTER 3 Command Reference • EXAMPLES EXAMPLE 1: Makes the setti ng of external power control. •E X I T S T A T U S The following exit values are returned: XSCF> setrcic -c exrdy 003001f f 10 The command completed successfully . XSCF> setrcic -c exrdy 003001f f address:003001ff exrdy:10 min The command completed succe[...]

C120-E360-06EN 4-1 CHAPTER 4 Error S t atus 1 4.1 setrci error st atus When the RCI construction by the setrci command ends abnormally and "Operation failed error status: XX" is displayed, the displayed error status code and explanation are described to the following table. Code Explanation 00 Detected the duplicate RCI a ddress. 01 RCI a[...]

4-2 C120-E360-06EN CHAPTER 4 Error St atus 4.2 setrcic error st atus When the RCI construction by the setrcic command ends abnormally and "Operation failed error status: XX" is displayed, the displayed error status code and explanation are described to the following table. Code Explanation -1 Detected an RCI transmission error . -2 T ermi[...]

[...]

Back Cover[...]