GE IC752CTD400 manual

GE Fanuc Automation Programmable Control Pr oducts CIMPLICITY® Display Station Touch Display: IC752CTD400/450 GFK-1425B March 1998[...]

GFL-002 Warnings, Cautions, and Notes as Used in this Publication Warning Warning notices are used in this publication to emphasize that hazardous voltages, currents, temperatures, or other conditions that could cause personal injury exist in this equipment or may be associated with its use. In situations where inattention could cause either person[...]

Preface GFK-1425B iii Content of This Manual This manual describes the features and operation of the following CIMPLICITY Display Station Touch Display products: Catalog Number IC752CTD400 IC752CTD450 Related Publications GFK-1189 CIMPLICITY ® HMI for Windows NT™ and Windows ® 95 Important Product Information GFK-1180 CIMPLICITY ® HMI for Wind[...]

Contents GFK-1425B v Product Features..................................................................................................... 2 Display and Touch Screen ................................................................................................... 3 Floppy Disk Drive Unit ...........................................................[...]

Contents vi CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998 GFK-1425B System Configuration Verification ............................................................................. 26 Troubleshooting ................................................................................................................ .2 7 Poweru[...]

Contents GFK-1425B Contents vii Figure 1. Touch Display Unit Dimensions ...................................................................................................... 5 Figure 2. Panel Cutout Dimensions ................................................................................................................. 6 Figure 3. Mounting the [...]

Contents viii CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998 GFK-1425B Table 1. Touch Display Features ............................................................................................... ...................... 2 Table 2. Touch Screen (Custom COM) I/O address .....................................................[...]

GFK-1425B 1 CIMPLICITY® D ISPLAY S TATION GFK-1425B Touch Display Products March 1998 IC752CTD400, IC752CTD450 Welcome to GE Fanuc’s CIMPLICITY Display Station products. These products provide an integrated hardware and software platform for running CIMPLICITY HMI applications. The Touch Display incorporates CIMPLICITY HMI software for Windows a[...]

2 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Product Features When you purchase a CIMPLICITY Touch Display system, you receive: • CIMPLICITY Display Station industrial computer with CIMPLICITY HMI and operating system software installed. • Power cord • Floppy disk drive (3.5-inch) • Installation har[...]

GFK-1425B Touch Display Products: IC752CTD400/450 3 Display and Touch Screen The Touch Display features a color liquid crystal display (LCD) with a touch screen surround. The touch-screen surround, which is an integral part of the front panel on all Touch Display Flat Screen models, makes operation of a configured system more intuitive by allowing [...]

4 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Hardware Installation This section describes procedures for mounting the Touch Display unit, and installing ISA- compatible cards and the floppy disk drive unit. A single cut-out is required in the mounting panel. No extra holes are required. Instead, ten spring-[...]

GFK-1425B Touch Display Products: IC752CTD400/450 5 Figure 1. Touch Display Unit Dimensions[...]

6 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Mounting Procedure 1 . Cut out the panel to the dimensions shown. The cut-out dimensions of 367 x 255mm (14.45 x 10.04 inches) allow a 1.5mm (0.06 inch) clearance on each edge of the Touch Display unit. Figure 2. Panel Cutout Dimensions 2 . Position the Touch Dis[...]

GFK-1425B Touch Display Products: IC752CTD400/450 7 Installing ISA-Compatible Cards The Touch Display rear panel must be removed in order to gain access to the ISA bus cards. There are six screws securing the rear panel. When these are removed, the rear panel can be lifted away from the main unit. Warning Switch of f the unit and disconnect the mai[...]

8 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B I/O Address and IRQ Allocation Caution For most applications an IRQ cannot be shared by more than one resource. If more than one resource is set to the same interrupt, the application may not respond properly and could cause your machine to lock up. The I/O addre[...]

GFK-1425B Touch Display Products: IC752CTD400/450 9 Figure 5. Jumper Locations Table 2. Touch Screen (Custom COM) I/O address LK2 LK3 Address OUT OUT Disabled IN OUT 2E8 hexadecimal OUT IN 310 hexadecimal (factory default) IN IN 3E8 Table 3. Touch Screen (Custom COM) IRQ One jumper determines the IRQ number, depending on its position: LK6 IRQ3 LK7 [...]

10 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Installing the Floppy Disk Drive The floppy disk drive is designed for mounting on the rear panel of the Touch Display unit. Two locating slots in the rear panel accept the two metal brackets on the disk drive housing. A thumbscrew fastens the drive assembly to [...]

GFK-1425B Touch Display Products: IC752CTD400/450 11 Changing the Air Filter The filter element should be changed every three months, or sooner in dusty environments. If the air filter is not changed at suitable intervals, or a non-approved filter element is installed, the unit may overheat. Filter Type: 6.35mm (0.25 inch) thick polyester/polyureth[...]

12 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Connection All connections are made on the side panel of the Touch Display unit. The connector layout is shown in Figure 8. Figure 8. Touch Display Connectors Table 4. Connector Listing Card Slot (from top) Type Function none 3-prong AC power receptacle Power in[...]

GFK-1425B Touch Display Products: IC752CTD400/450 13 AC Power Input The power input connector is a standard CEE22 type. A power cable is supplied with the Touch Display unit. The power supply is auto-ranging, therefore no configuration is needed to change the unit between 110 volt AC and 240 volt AC operation. Check that the fuse is of the correct [...]

14 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Serial Communication Cables COM 1 and COM 2 Pin Assignments 1 DCD 2R x 3T x 4 DTR 5 Gnd 6 DSR 7 RTS 8 CTS 9R I Serial communication cables for COM1 and COM2 should be correctly terminated. • Typically COM1 is used for communications to the PLC and COM2 is used[...]

GFK-1425B Touch Display Products: IC752CTD400/450 15 Printer Port LPT1 (Parallel Port) LPT1 Pin Assig nments 1 St robe 10 Ack nowledg e 2 Data Bit 0 11 Busy 3 Data Bit 1 12 Paper End 4 Data Bit 2 13 Select Out 5 Data Bit 3 14 Au t o Feed XT 6 Data Bit 4 15 Error 7 Data Bit 5 16 Initialize Printer 8 Data Bit 6 17 Select In (From P rinter) 9 Data Bit[...]

16 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Initial Startup When you first power up your system, you will need to attach a standard PS/2-type keyboard to the external keyboard port on the Display Station. When the system starts up, you will be required to enter the Product ID from the Windows 95 Certifica[...]

GFK-1425B Touch Display Products: IC752CTD400/450 17 12 . Touch the Finish button. (Although the network card supports Plug & Play mode, this feature has been disabled due to hardware conflict of non-Plug & Play devices. Please refer to “Installing Network Driver on Microsoft Windows 95 Systems”.) 13 . Windows 95 will go through setup. [...]

18 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Configuring the Touch Display to Run on a Microsoft Network Before setting up your new CIMPLICITY Display Station up for the network, you should consult with your network administrator. Duplicate TCP/IP addresses and duplicate computer names on the same network [...]

GFK-1425B Touch Display Products: IC752CTD400/450 19 Setting up Windows NT Systems (IC752CTD450) Before you get started you will need to connect a PS/2 keyboard to the Display Station. 1 . Plug in the floppy, keyboard, and power cord. 2 . Power on the unit. 3 . Read license agreement 4 . TAB to your choice and press E NTER . 5 . Press Enter to star[...]

20 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Installing Network Driver on Microsoft Windows NT Systems (IC752CTD450) 1 . During the initial setup of Windows NT, the system will display a screen with the following options already selected:. “This computer will participate on a network.” “Wired to a ne[...]

GFK-1425B Touch Display Products: IC752CTD400/450 21 Login Recommendation If you enter ge as your Administrator password, your CIMPLICITY Display Station will automatically log on as Administrator. Log onto the system as Administrator when you power up the system. Doing so eliminates the requirement to log on to CIMPLICITY when you run the CIMPLICI[...]

22 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Installing Application Software The Windows operating system and CIMPLICITY HMI software is loaded onto the Touch Display unit at manufacture. If it is necessary to reload software, follow the instructions in the documentation supplied with the software. The fol[...]

GFK-1425B Touch Display Products: IC752CTD400/450 23 Shutting Down the Computer Caution To avoid damaging files, always shut down Windows software before removing power from your Display Station product. To shut down Windows 95 or Windows NT software, select Shut Down from the Start menu. System Operation External Mouse The touch screen and PS/2 mo[...]

24 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B BIOS Settings It is normally not necessary to change the hardware configuration settings in the CMOS memory. If settings become corrupted, follow the procedures here to reload the factory configuration. Enter the CMOS Setup mode by pressing the D EL key when pro[...]

GFK-1425B Touch Display Products: IC752CTD400/450 25 Interrupt Requests and I/O Assignments Caution Each hardware resource in the system must be assigned a unique interrupt request (IRQ) number and an I/O address range. If these settings overlap, the system will not function properly. Below is a list of the factory-set IRQs and addresses used in th[...]

26 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Diagnostics and Troubleshooting This section consists of “Self-Test Diagnostics,” “Troubleshooting,” and “Corrective Actions.” “Self-Test Diagnostics,” describes how to respond to errors that could be detected by the automatic self test that is p[...]

GFK-1425B Touch Display Products: IC752CTD400/450 27 Troubleshooting Powerup Symptom Possible Causes Solution For Windows NT systems only: The following error message appears: The system could not log you on. Make sure your User name and Domain are correct ... You did not type ge for the password during initial setup. Set the logon password to ge .[...]

28 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Display Symptom Possible Causes Solution Characters are dim. Computer screen is in direct light. Change lighting or adjust contrast. Display is blank (PWR indicator is lighted). Screen has overheated. If Display Station is in direct sunlight, move it and allow i[...]

GFK-1425B Touch Display Products: IC752CTD400/450 29 Touch Screen Note Operating temperature can affect touch screen calibration. If touch screen operation is slightly off, recalibrate it by running calibration from the Touch Screen icon in Control Panel. Symptom Possible Causes Solution Cursor does not respond at all to touch. Touch screen disable[...]

30 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Communications PLC/CPU Connection Symptom Possible Causes Solution CIMPLICITY does not communicate with a PLC that has been autoconfigured (AUTOCONFIG/DEFAULT/I/O error). The system is attempting to communicate with a 90-30 PLC using the SNP driver and a CIMPLIC[...]

GFK-1425B Touch Display Products: IC752CTD400/450 31 MODBUS RTU Communications Symptom Possible Causes Solution Communications between the host computer and the controller are unsuccessful. COM port not configured in system. Verify that the COM port is configured in the system. Cabling between computer and controller. Verify that the cable between [...]

32 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Printing Symptom Possible Causes Solution Printer will not turn on. Cables not connected properly. Printer power cord not plugged in. Ensure that the cables are properly connected and that the power cord is connected to the electrical outlet. Printer will not pr[...]

GFK-1425B Touch Display Products: IC752CTD400/450 33 Corrective Actions Auto Logon Error Message All Windows NT CIMPLICITY Display Station products have the auto logon feature enabled with ge as the password. This feature eliminates the need for a keyboard to type C TRL -A LT -D EL and enter a password. If, during initial setup, you do not type ge [...]

34 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B CMOS Checksum Error If the CMOS battery has failed, the following error messages will be displayed on the screen: CMOS checksum error - Defaults loaded CMOS battery failed If you see the above message, you can still operate the Display Station by pressing the D [...]

GFK-1425B Touch Display Products: IC752CTD400/450 35 Frequently Asked Questions Hardware FAQs My touch screen isn’t working. What should I do? Ensure that the Touch Screen settings (in the Control Panel, double click the Touch Screen icon) are set as described in “Touch Screen Driver for Windows” on page 22. Where is the right mouse button wh[...]

36 CIMPLICITY® Display Station Touch Display: IC752CTD400/450 – March 1998 GFK-1425B Software FAQs What HMI software comes preloaded on the Touch Display product? Beginning in mid-February 1997, all units come preloaded with the full point count version of HMI software. You can get either Windows ’95 or Windows NT operating system with the dev[...]

GFK-1425B Touch Display Products: IC752CTD400/450 37 Specifications Features Microprocessor Pentium 133 MHz Math Coprocessor built in User memory 32 Mbyte Operating System Microsoft Windows 95 or Microsoft Windows NT Hard Disk 1.2 Gbyte ISA bus card slots Six total. Two full length slots available for additional cards. Total current available for s[...]

Index GFK-1425B Index-1 A AC Input, 13 Air filter, 11 Audible warning, 16 Auto Logon error message, 33 Autologon, 19 B Backplane reserved I/O address, 8 BIOS settings, 24 C Calibrating the touch screen, 33 Card Clamp, 7 Catalog numbers floppy disk drive IC752FPY000, 3 Touch Display IC752CTD400, 2 IC752CTD450, 2 Catalog numbers, upgrades IC752HDD200[...]

Index Index-2 CIMPLICITY® Display Station Touch Display: IC752CTD400/450–March 1998 GFK-1425B N Network communications troubleshooting, 31 P PLC/CPU connection troubleshooting, 30 Power Input, 13 Powering up, 16 Powerup troubleshooting, 27 Printing troubleshooting, 32 Product features, 2 R Registering your CIMPLICITY software, 21 Reset accidenta[...]