Gigabyte GA-Q87M-D2H manual

GA-Q87M-D2H User's Manual Rev . 1002 1 2ME- Q87MD2H- 1002R[...]

Motherboard GA-Q87M-D2H Jun. 5, 2013 Jun. 5, 2013 Motherboard GA-Q87M-D2H Copyright © 2013 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in this manual are legally registered to their respective owners. Disclaimer Information in this manual is protected by copyright laws and is the property of GIGABYTE. Changes to t[...]

- 3 - T able of Contents GA - Q87M- D2H M other board Layout .............................................................................. 4 GA - Q87M- D2H M other board Bloc k Diagram ................................................................. 5 Chapter 1 Hardware Inst allation ...............................................................[...]

- 4 - GA- Q87 M -D2H Motherboard La yout The box contents above are for reference only and the actual items shall depend on the product package you obtain. The box contents are subject to change without notice. Box Contents 5 GA-Q87M-D2H motherboard 5 Motherboard driver disk 5 T wo SA T A cables 5 User's Manual 5 I/O Shield KB_MS CPU_F AN LGA1[...]

- 5 - GA- Q87M- D2H Motherboard Block Diagram PS/2 KB/Mouse LGA1 150 CPU DMI 2.0 FDI CPU CLK+/- (100 MHz) BIOS DDR3 1600/1333 MHz Dual Channel Memory LPC Bus Intel ® Q87 iTE ® Super I/O PCIe CLK (100 MHz) PCIe CLK (100 MHz) PCI Express Bus 1 PCI Express x16 x1 LAN RJ45 Intel ® GbE LAN 1 PCI PCI Bus PCI CLK (33 MHz) PCIe to PCI Bridge x1 x1 1 PCI[...]

- 6 - Chapter 1 Hardware Installation 1- 1 Installation Precautions The motherboard contains numerous delicate electronic circuits and components which can become damaged as a result of electrostatic discharge (ESD). Prior to installation, carefully read the user's manual and follow these procedures: • Prior to installation, make sure the ch[...]

- 7 - 1- 2 P roductSpe cications CPU  Support for Intel ® Core ™ i7 processors/Intel ® Core ™ i5 processors/ Intel ® Core ™ i3 processors/Intel ® Pentium ® processors/Intel ® Celeron ® processors in the LGA1 150 package (Go to GIGABYTE's website for the latest CPU support list.)  L3 cache varies with CPU Chipset [...]

- 8 - USB  Chipset: - Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB headers) - Up to 8 USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers) Internal Connectors  1 x 24-pin A TX main power connector  1 x 4-pin A TX 12V power connector  6 x SA [...]

- 9 - Unique Features  Support for APP Center * Available applications in APP Center may differ by motherboard model. Supported functions of each application may also differ depending on motherboard specications. - EZ Setup - USB Blocker  Support for ON/OFF Charge Bundled Software  Norton ® Internet Security (OEM version)  Intel ® [...]

- 10 - DualChannelMemoryConguration This motherboard provides four DDR3 memory sockets and supports Dual Channel T echnology . After the memory is installed, the BIOS will automatically detect the specications and capacity of the memory . Enabling Dual Channel memory mode will double the original memory bandwidth. The four DDR3 memor[...]

- 1 1 - Activity LED Connection/ Speed LED LAN Port Activity LED: Connection/Speed LED: State Description Orange 1 Gbps data rate Green 100 Mbps data rate Off 10 Mbps data rate State Description Blinking Data transmission or receiving is occurring On No data transmission or receiving is occurring DVI-D Port (Note) The DVI-D port conforms to the DVI[...]

- 12 - 1- 7 Internal Connec tors Read the following guidelines before connecting external devices: • First make sure your devices are compliant with the connectors you wish to connect. • Before installing the devices, be sure to turn off the devices and your computer . Unplug the power cord from the power outlet to prevent damage to the devices[...]

- 13 - 1/2) A TX_12V/A TX (2x2 12V Power Connector and 2x12 Main Power Connector) With the use of the power connector , the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector , rst make sure the power supply is turned off and all devices are properly installed. The power co[...]

- 14 - 5) SA T A3 0/1/2/3/4/5 (SA T A 6Gb/s Connectors) The SA T A connectors conform to SA T A 6Gb/s standard and are compatible with SA T A 3Gb/s and SA T A 1.5Gb/s standard. Each SA T A connector supports a single SA T A device. The Intel ® Q87 Chipset supports RAID 0, RAID 1, RAID 5, and RAID 10. Refer to Chapter 3, "Conguring SA T A H[...]

- 15 - 7) F_AUDIO (Front Panel Audio Header) The front panel audio header supports Intel High Denition audio (HD) and AC'97 audio. Y ou may connect your chassis front panel audio module to this header . Make sure the wire assignments of the module con - nector match the pin assignments of the motherboard header . Incorrect connection betwee[...]

- 16 - 1 1) F_USB1/F_USB2 (USB 2.0/1.1 Headers) The headers conform to USB 2.0/1.1 specication. Each USB header can provide two USB ports via an optional USB bracket. For purchasing the optional USB bracket, please contact the local dealer . Pin No. Denition Pin No. Denition 1 Power (5V) 6 USB DY+ 2 Power (5V) 7 GND 3 USB DX- 8 GND 4 USB D[...]

- 17 - 13) LPT (Parallel Port Header) The LPT header can provide one parallel port via an optional LPT port cable. For purchasing the optional LPT port cable, please contact the local dealer . 15) BA T (Battery) The battery provides power to keep the values (such as BIOS congurations, date, and time information) in the CMOS when the computer is [...]

- 18 - Chapter 2 BIOS Setup • Because BIOS ashing is potentially risky, if you do not encounter problems using the current version of BIOS, it is recommended that you not ash the BIOS. T o ash the BIOS, do it with caution. Inadequate BIOS ashing may result in system malfunction. • It is recommended that you not alter the default set[...]

- 19 - 2- 2 M.I. T . Whether the system will work stably with the overclock/overvoltage settings you made is dependent on your overall system congurations. Incorrectly doing overclock/overvoltage may result in damage to CPU, chipset, or memory and reduce the useful life of these components. This page is for advanced users only and we recommend y[...]

- 20 - & CPU PLL Selection Allows you to set the CPU PLL. Auto lets the BIOS automatically congure this setting. (Default: Auto) & Filter PLL Level Allows you to set the Filter PLL. Auto lets the BIOS automatically congure this setting. (Default: Auto) & Uncore Ratio Allows you to set the CPU Uncore ratio. The adjustable range is [...]

- 21 - ` Advanced Memory Settings &  ExtremeMemoryProle (X.M.P .) (Note) , System Memory Multiplier , Memory Frequency(MHz) The settings above are synchronous to those under the same items on the Advanced Frequency Settings menu. & Performance Enhance Allows the system to operate at three different performance levels.  [...]

- 22 - ` PC Health Status & Reset Case Open Status  Disabled Keeps or clears the record of previous chassis intrusion status. (Default)  Enabled Clears the record of previous chassis intrusion status and the Case Open eld will show "No" at next boot. & Case Open Displays the detection status of the chassis intrusion detec[...]

- 23 - 2-3 Syst em This section provides information on your motherboard model and BIOS version. Y ou can also select the default language used by the BIOS and manually set the system time. & System Language Selects the default language used by the BIOS. & System Date Sets the system date. The date format is week (read-only), month, date, a[...]

- 24 - 2- 4 BIOS Features & Boot Option Priorities Species the overall boot order from the available devices. For example, you can set hard drive as the rst priority ( Boot Option #1 ) and DVD ROM drive as the second priority ( Boot Option #2 ). The list only displays the device with the highest priority for a specic type. For example,[...]

- 25 - & Fast Boot Enables or disables Fast Boot to shorten the OS boot process. Ultra Fast provides the fastest bootup speed. (Default: Disabled) & Limit CPUID Maximum (Note) Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating[...]

- 26 - & Storage Boot Option Control Allows you to select whether to enable the UEFI or legacy option ROM for the storage device controller.  Disabled Disables option ROM.  Legacy only Enables legacy option ROM only . (Default)  UEFI only Enables UEFI option ROM only .  Legacy First Enables legacy option ROM rst.  UEFI First E[...]

- 27 - & Init Display First Species the rst initiation of the monitor display from the installed PCI graphics card, PCI Express graphics card or the onboard graphics.  IGFX Sets the onboard graphics as the rst display .  PCIe 1 Slot Sets the graphics card on the PCIEX16 slot as the rst display . (Default)  PCIe 2 Slot Sets [...]

- 28 -  Disabled The USB 3.0 ports are routed to the EHCI controller and the xHCI controller is turned off. All USB 3.0 devices function as High Speed devices regardless of xHCI software support/availability .  Man ual Allows you to determine whether to rout the USB 3.0 ports to the xHCI or EHCI controller before booting to OS, and also provi[...]

- 29 - ` Serial A T A Port 0/1/2/3/4/5 & Port 0/1/2/3/4/5 Enables or disables each SA T A port. (Default: Enabled) & Hot plug Enables or disable the hot plug capability for each SA T A port. (Default: Disabled) ` Intel(R)Anti-TheftT echnologyConguration This section allows you to enable/disable Intel Anti-Theft T echnology (Inte[...]

- 30 - & Power Loading Enables or disables dummy load. When the power supply is at low load, a self-protection will activate caus - ing it to shutdown or fail. If this occurs, please set to Enabled . Auto lets the BIOS automatically congur this setting.(Default:Auto) & Resume by Alarm Determines whether to power on the system at a desire[...]

- 31 - & RC6(Render Standby) Allows you to determine whether to let the onboard graphics enter standby mode to decrease power consumption. (Default: Enabled) & Power On By Keyboard Allows the system to be turned on by a PS/2 keyboard wake-up event. Note: T o use this function, you need an A TX power supply providing at least 1A on the +5VSB[...]

- 32 - & Exit Without Saving Press <Enter> on this item and select Ye s . This exits the BIOS Setup without saving the changes made in BIOS Setup to the CMOS. Select No or press <Esc> to return to the BIOS Setup Main Menu. & Load Optimized Defaults Press <Enter> on this item and select Ye s to load the optimal BIOS default[...]

- 33 - The BIOS Setup menus described in this section may differ from the exact settings for your motherboard. The actual BIOS Setup menu options you will see shall depend on the motherboard you have and the BIOS version. C-2.ConguringLegacyRAIDROM Enter the Intel ® legacy RAID BIOS setup utility to congure a RAID array . Skip th[...]

- 34 - Making a SA T A RAID/AHCI Driver Diskette With the correct BIOS settings, you are ready to install Windows 8/7. Installing Windows 8/7 As Windows 7 already include Intel ® SA T A RAID/AHCI driver , you do not need to install separate RAID/AHCI driver during the Windows installation process. After the operating system is installed, we recomm[...]

- 35 - Regulator y Statements Regulatory Notices This document must not be copied without our written permission, and the contents there of must not be imparted to a third party nor be used for any unauthorized purpose. Contravention will be prosecuted. We believe that the information contained herein was accurate in all respects at the time of pri[...]

- 36 - Conta ct Us GIGA-BYTE TECHNOLOGY CO., L TD. Add res s: No. 6, Ba o Chia ng Roa d, Hs in-Ti en Di st., N ew T ai pei Ci ty 2 31, Taiwan TEL: + 88 6 -2- 8912- 40 00 , F A X : +88 6 -2- 8912- 40 0 5 T ec h. an d Non -T ech . Sup por t (Sa les /M ar keti ng) : htt p://gg ts.g igaby te. co m.t w WEB a ddr ess ( Engl ish): htt p:// w ww.gi gaby te[...]