Grizzly G1032 manual

DUST COLLECTOR MODEL G1032 INSTRUCTION MANUAL COPYRIGHT © 1992 BY GRIZZLY INDUSTRIAL WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. REVISED NOVEMBER, 1997. PRINTED IN USA DISCONTINUED MACHINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE LAST CONF[...]

-B- G1032 Dust Collector WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints. • Crystalline silica from bricks,[...]

G1032 Dust Collector -1- Table Of Contents PAGE 1. SAFETY ....................................................................................................................2 SAFETY RULES FOR ALL TOOLS ....................................................................2 ADDITIONAL SAFETY INSTRUCTIONS FOR DUST COLLECTORS ................3 2. CIRCU[...]

-2- G1032 Dust Collector WARNING: For Your Own Safety Read Instruction Manual Before Operating Collector Safety Instructions For Power Tools These safety rules cannot cover every situation in a work shop. Consider your conditions when setting up or operating your dust collector. SECTION 1: SAFETY a) Always wear eye protection. b) Always keep guards[...]

G1032 Dust Collector -3- Additional Safety Instructions For Dust Collectors 17. DON’T OVERREACH. Keep proper footing and balance at all times. 18. CHECK FOR DAMAGED PARTS. Before further use of the tool, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function-c[...]

Figure 1. Improper connections of the electrical-grounding conductor can result in risk of electric shock. The conductor with green or green and yellow striped insulation is the electrical-grounding conductor. If repair or replacement of the electric cord or plug is necessary, do not connect the equipment grounding conductor to a live terminal. Und[...]

G1032 Dust Collector -5- Grizzly Industrial, Inc. is proud to offer the Model G1032 Dust Collector. This dust collector is a part of Grizzly’s growing family of fine machinery. When used according to the guidelines set forth in this manual, you can expect years of trouble- free, enjoyable operation and proof of Grizzly’s commitment to customer [...]

-6- G1032 Dust Collector Unpacking The Model G1032 Dust Collector is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call Customer Service immediately for advice. Save the containers and all packing materials for possible inspection by the carrier or its a[...]

G1032 Dust Collector -7- Site Considerations When placing the G1032 Dust Collector in your shop, three major considerations should be addressed: working clearances, lighting and elec- trical, and circuit loading. 1. Working Clearances: Be sure to allow your- self sufficient room to safely operate your machines in any foreseeable operation. Consider[...]

-8- G1032 Dust Collector SECTION 4: ASSEMBLY Beginning Assembly Assembly of the G1032 is straightforward. We have organized the assembly process into steps. Please follow them in sequence. Caution: All die-cut metal parts have a sharp edge (called “flashing”) on them after they are formed. This is removed at the factory. Sometimes though, a bit[...]

G1032 Dust Collector -9- Figure 3. Figure 4. Support Column There is one support column that holds the col- lector body & fan/motor assembly and the collec- tor. Attach it to the base plate using the four (4) 5 ⁄ 16 " - 18 x 3 ⁄ 4 " hex bolts provided. Figure 3. Fan / Motor The collector body includes the fan assembly, switch, and[...]

-10- G1032 Dust Collector Figure 5. Figure 6. Collector The collector attaches to each support bracket. The inside of the collector is funnel shaped and directs the air around in a cyclone motion. Make sure that the inside taper (funnel) is faced down- ward and the collector inlet faces toward the col- lector body. Figure 5. Bags Slip the collectio[...]

G1032 Dust Collector -11- SECTION 6: OPERATIONS Please review the safety rules if you are not sure about the risks associated with operating this machine. Turn on the power supply at the main panel if not already on. Flip toggle switch on and be ready to switch off just in case there is a prob- lem. The dust collector should run smoothly and be fre[...]

-12- G1032 Dust Collector Mobile For mobility, the G1032 is mounted on casters and can be moved within close proximity to one or two woodworking machines, depending on the model. You will need a flexible duct to connect each machine with a collection hood. If you wish to specifically direct air flow while the dust collec- tor is attached to more th[...]

G1032 Dust Collector -13- System Grounding Since plastic hose is abundant, relatively inex- pensive, easily assembled, and airtight, it is a very popular material for conveying dust from woodworking machines to the dust collector. We recommend using flexible hose (flex-hose) to connect the woodworking machine to the dust collector. However, plastic[...]

-14- G1032 Dust Collector SECTION 7: MAINTENANCE Lubrication Periodic maintenance will ensure safe operation, long dust collector life, and low overall cost of operation. Routinely check the condition of the following items and repair or replace as necessary: 1. Loose mounting bolts, collector body, outlet, and support bracket mounting bolts. 2. Wo[...]

G1032 Dust Collector -15- SECTION 8: CLOSURE The following pages contain parts diagram, parts list, general machine data a n d Warranty/Return information for your Model G1032 Dust Collector. If you need parts or help in assembling your machine, or if you need operational information, we encourage you to call the appropriate region- al Service Depa[...]

-16- G1032 Dust Collector REF PART # DESCRIPTION 01 P1032001 CASTOR 02 PS01 PHLP HD SCREW 10-24 X 1 ⁄ 2 04 P1032004 BASE 05 PS06 PHLP HD SCREW 10-24 X 3 ⁄ 8 06 P1032006 INLET COVER 07 P1032007 SPECIAL CAP SCREW 08 P1032008 SETSCREW 09 P1032009 SPECIAL WASHER 10 P1032010 FAN 11 P1032011 COLLECTOR BODY 12 PW07 FLAT WASHER 5 ⁄ 16 '' 13[...]

G1032 Dust Collector -17- GRIZZLY MODEL G1032 DUST COLLECTOR Design Type: ........................................................................................Single Stage - Upright on Casters Overall Dimensions & Specifications: Base ............................................................................................................[...]

-18- G1032 Dust Collector Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written war[...]

10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8" Drill Press ___Mini Lathe ___8" Table Saw ___10" - 12" Thickness Planer ___8" - 10" Bandsaw ___Scroll Saw ___Disc/Belt Sander ___Spindle/Belt Sander ___Mini Jointer ___Other_________[...]

FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_______________________________ Street_______________________________ City______________State______Zip______ Send a Grizzly Catalog to a friend:[...]