Haier Twin-tub Washing Machine manual

T win-tub Washing Machine User's manual T win-tub Washing Machine User's manual This manual is for Please read this manual carefully before using. Retain it for future reference. Special number:0030807643[...]

Contents Safety precautions Installation and adjustment Preparation before washing The musts in washing Usage of the detergent Washing sequence Disposal after washing Names of the parts The cover 2 Packing list Trouble-Shooting Answers to question Specification ×°Ïä˵Ã÷ W ater inlet hose Gland Lint filter Packing list Twin-tub washing machi[...]

¸÷²¿Î»Ãû³Æ 1 Meaning and description of the symbols Warning sign Forbidding sign Contents marked with that symbol are related to the safety of the product and the personal safety of the users. Please operate in strict conformity to the contents, otherwise it may cause damage of the machine or injure the personal safety of the user . Conte[...]

×¢ÒâÊÂÏî 2 Safety precautions Please insert the power cord into special receptacle with rated vol- tage.Be sure to use single-phase three pins receptacle.The earthing terminal of the receptacle must be earthed reliably.If possible,please adopt electric leakage protector. When the machine is normally using, please put the power plug at the l[...]

×¢ÒâÊÂÏî 3 Do not stretch hands into the working machine. It is dangerous even if the rotation is slow. T ake special care of the children. Safety precautions Do not put any hot or heavy items ( such as the kettle with hot water ) on the washing machine. Do not decompose, repair or alter the machine by yourself. Handicapped or children with[...]

Overflow filter Lint filter If the extra hose is too long, cut it either at point A or B. <10cm B A > 30mm <1.5m 4 Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter After opening the p[...]

Install the water inlet hose; Select the water level Select water level according to the quantity of the laundries. Set the water level adjusting lever to needed line. Insert the water inlet hose into the water-filling entrance on the control panel directly.(pull it out to dismantle it) Maximum Max. Minimum Min Medium Med Water level indicator Wate[...]

Ï´Ç°×¼±¸ Preparation before washing 1.Connect the water inlet hose. 2.Confirm that the washing machine is earthed reliably . Th en insert the power plug into the receptacle. Do not connect the earth terminal to the gas pipe and tap water pipe. 3.Put down the drain hose . 4.Slanting or uneven ground may result in unstable working or abnormal[...]

Ï´µÓÎïµÄ²Î¿¼ÖØÁ¿ Ï´µÓÐëÖª Ï´µÓ¼ÁµÄʹÓà The capacity of washing and spinning of the machine refer to the weight of the standard laundries under dry condition that can be washed or spinned in one time. Laundries quantity in one washing cycle shall be lower than the standard capacity. the largest capacity is only th[...]

Âé Spin timer Wash timer Wash selector Water-filling entrance (T o set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). (Strong current, standard current) (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). SPIN TIMER WASH TI[...]

Rinse with water-filling Rinsing 1.Put the laundries Put the laundries into the wash tub. Select suitable current according to the laundries. 2.Adjust the water level Set the water level with water level adjusting lever according to the laundries quantity. Then fill suitable water continuously . 3.Rinse Adjust the wash timer to 5-7 minutes to do ri[...]

Rinse with stored water 1. Put the laundries into the wash tub. Select suitable current according to the laundries. 2. Fill water to preset water level. 3. Rinse Adjust the wash timer to 2-3 minutes to do rinsing. When the laundries quantity is few, please use "Standard" current. If you use "Strong" current, it may splash. Rinsi[...]

Ï´ºó´¦Àí After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. T ake off the overflow filter. As indicated in the figure, nip the elastic fixing claw and pull it to the direc[...]

Ï´ºó´¦Àí Cleaning the overflow filter 2. T ake off the corrugation pipe. Dismantle the upper part of the corrugation pipe inside the overflow filter ( as indicated in Figure 1). 3. Cleaning the overflow filter Clean the lint around the filter and flush with tap water. 4. Install the overflow filter. (1).Install the corrugation pipe. (2).Ins[...]

3.in stall th e after cle aning, ins tall it a s or igin as sure it r eliable protective co ver Ï´ ºó ´¦ Àí Cleaning the protective cover 2.cl eaning di rty under th e take o ut th e su ndries us ing the pl ier o r ot her wi ry protective co ver Wipe the complete unit with soft cloth twisted dry. Wipe with neutral detergent if too dirty Do [...]

T rouble-shooting Answers to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do [...]