HandHeld Entertainment 4800p manual

4800p Quick Start Guide[...]

1 Note: Refer to your user’s guide for information about cleaning your device. Getting S tarted Turn off computer’s powe r before connecting the scanner, then power up the computer once the scanner is fully connected. USB Connection[...]

2 Reading T echniques The 4800p scans bar codes and also captures images. It can be used with or without a stand. The 4800p’s viewfinder projects a green aiming beam that should be centered over the bar code, but can be positioned in any direction for a good read. Hold the scanner with the aiming beam cent ered over the bar code. The 4800p beeps [...]

3 4800p S tand The stand holds the 4800p at a fixed distance for capturing images or read ing bar codes on security/ identification cards. The wedge insert supplied with the stand provides the optimum angle for scanning and capturing images in most lighting conditions. The card should be placed on the wedge with the bar code closest to th e back of[...]

4 Interface Scan the bar code that describes the PC or interface you are using. USB Keyboard (PC) Emulate External Keyboard USB Japanese Keyboard (PC) USB COM Port Emulation USB HID Bar Code Imager[...]

5 Keyboard Country Scan the Program Keyboard Country bar code below, then scan the numeric bar code(s) from page 9, then the Save bar code to program the keyboard for your country. As a general rule, the following characters are not supported by the scanner for countries other than the United States: @ | $ # { } [ ] = / ‘ < > ~. Note: For[...]

6 Reread Delay This sets the time period before the scanner can read the same bar code a second time. Setting a reread delay protects agai nst accidental rereads of the same bar code. Suffix If you want a carriage re turn after the bar code, scan the Add CR Suffix bar code . To add a tab after the bar code, scan the Add T ab Suffix bar code. Otherw[...]

7 Add Code ID Prefix to all Symbologies Scan the following bar code if you wish to add a Code ID prefix to all symbologies at once. Note: For a complete list of Code IDs, see the User’s Guide for your product at our website, www.handheld.com. Function Code T ransmit When this selection is en abled and function codes are contained within t he scan[...]

8 Data Format Editor Instructions The following are abbreviated instructions for entering a data format. For complete instructions refer to your User’s Guide, available at our website, www.handheld.com . 1. Scan the Enter Data Format symbol. 2. Primary/Alternate Format: scan 0 for Primary Format. 3. Terminal Type: scan 99 for any terminal type. 4[...]

9 Programming Chart 0 2 1 4 3 5 6 7[...]

10 A B C D E F 9 8 Save[...]

11 V isual Xpress™ To obtain access to addi tional features for the imager, use Visual Xpress, available from our website at www.handheld.com. For complete download instructions and descriptions of Visual Xpress features, refer to your User’s Guide. T echnical Assistance If you need assistance inst alling or troubleshooting your imager, please [...]

12 Europe, Middle East, and Africa Telephone: +31 (0) 40 7999 393 Fax: +31 (0) 40 2425 672 E-mail: eurosupport@handheld.com Asia Pacific Telephone - Hong Kong: +852-3188-3485 or 2511-3050 Telephone - China: +86 21 6361 3818 E-mail: aptechsupport@handheld.com Japan Telephone: +813 5770-6312 E-mail: aptechsupport@handheld.com Malaysia Telephone: +603[...]

13 paid) with a copy of th e dated purchase record attached. Contact the appr opriate location below to obtain a Return Material Authorization number (RMA #) before returning the product. North America Telephone: (800) 782-4263 Fax: (803) 835-8012 E-mail: naservice@handheld.com Latin America Telephone: (803) 835-8000 Telephone: (800) 782-4263 Fax: [...]

14 Online Product Service and Repair Assistance You can also access pro duct service and repair assistance online at www.handheld.com . Limited W arranty Hand Held Products, Inc. ("Hand Held Products") warrants its products to be free from defects in materials and workmanship and to conform to Hand Held Products published specifications a[...]

15 This warranty shall extend from the time of shipment for the duration published by H and Held Products for the product at the time of purchase ("Warranty Period"). Any defective product must be returned (at purchaser’s expense) during the Warranty Period to Hand Held Products factory or authorized service center for inspection. No pr[...]

16 HAND HELD PRODUCTS RESPONSIBILITY AND PURCHASER’S EXCLUSIVE REMEDY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT. IN NO EVENT SHALL HAND HE LD PRODUCTS BE LIABLE FOR INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, AND, IN NO EVENT, SHALL ANY LIABILITY OF HAND HELD PRODUCTS ARISING IN CONNECTION WITH ANY P[...]

17 Disclaimer Hand Held Products, Inc. (“Hand Held Products”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult Hand Held Products to determine whether any such changes have been made. The information in this publication does not[...]

18[...]

Hand Held Products 700 Visions Drive P.O. Box 208 Skaneateles Falls, NY 13153-0208 4800P-QS Rev A 10/07[...]