Hanns.G JW199D manual

19 inch Wide Screen TFT LCD Monitor JW199D USER’S MANUAL[...]

User’s Manual 2 Before operating the monitor, please read th is manual thoroughly. Th is manual should be retained for future reference. FCC Class B Radio Frequency Interference S t atement This equipment has been tested and found to comp ly with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are desi[...]

Congratulations! You have just purchased a TCO' 99 approved and labeled product! Your choice has pr ovided y ou with a product developed for professional use. Your purchase has al so contributed to reducing the burden o n the environment and also t o the further development of environm entally adapted electronics products. Why do we have envir[...]

computers. The labeling scheme is developed as a joint effort by the TCO (The S wedish Confederation of Professional Employees), by Svenska Natursk yddsforeningen (The Swedish Society for Nature Conservation), and b y Statens Energimyndighet (The Swedish National Energy Administration). Approval requirem ents cover a wide range of issues: environme[...]

TCO Development SE-114 94 Stockholm , Sweden Fax: +46 8 782 92 07 Em ail (Internet): development@tco.se Current inform ation regardi ng TCO' 99 approved and labeled products m ay also be obtained via the Internet, using the address: http://www.tco-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed cir[...]

TCO'99 requireme nt states that batte ries, the color-generating lay ers of displa y screens and the electrical or electronics components must not contain any cadmium. Mercury Mercury is sometimes found in batt eries, relays and switches. It dam ages the nervous system and is toxic in high doses. The relevant TCO' 99 requirement states th[...]

User’s Manual 7 Recycling Information We, the Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier ear th via appropriate treatment and recycling of industrial technology devic es at the end-of-life. These devices contain recyclable materials, which can be re-decomposed and re-integra[...]

8 T ABLE OF CONTENTS SAFETY NOTICE ........................................................................................... 9 PRECAUTIONS ......................................................................................... 9 SPECIAL NOTES ON LCD MONIT ORS ................................................... 10 BEFORE YOU OPERA TE THE MONIT O[...]

User’s Manual 9 SAFETY NOTICE 1. The changes or modifications not expr essly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2. Shielded interface cables and AC power cord , if any , must be used in order to comply with the emission limits. 3. The manufacturer is not responsible for [...]

10 SPECIAL NOTES ON LCD MONITORS The following symptoms are normal with LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. T urn off the Power Switch and then turn it on agai n to make sure the flicker disappears. • Y ou may find slightly uneven brightness on the s[...]

User’s Manual 11 BEFORE YOU OPERA TE THE MONIT OR FEA TURES • 19” Wide screen TFT Color LCD Monitor • Crisp, Clear Display for Windows • Recommended Resolutions : 1440 X 900 @60Hz • EP A ENERGY ST AR ® • Ergonomic Design • S pace Saving, Comp act Case Design CHECKING THE CONTENTS OF THE P ACKAGE The product p ackage should include [...]

User’s Manual 12 INST ALLA TION INSTRUCTIONS Inst all Remove Figure.1. Installing and Removing the Base INSTALLATION: 1. Align the monitor with the opening in the base. 2. Note that the longer secti on of the base points forward. 3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly. 4. Verify tha[...]

User’s Manual 1 3 MAKING CONNECTIONS CONNECTING TO A PC T urn off your computer befor e performing the procedure below . 1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer ’s D-Sub port. 2. Connect one end of the DVI-D cable (Dual input mode optional) to the back of the monitor and connect[...]

User’s Manual 1 4 ADJUSTING THE VIEWING ANGLE • For optimal viewing it is recommended to look at the full face of t he monitor , then adjust the monitor ’s angle to your own preference. • Hold the stand so you do not topple the m onitor when you change the monitor ’s angle. • Y ou are able to adjust the monitor ’s angle from -5 ° to [...]

User’s Manual 1 5 OPERA TING INSTRUCTIONS GENERAL INSTRUCTIONS Press the power button to turn the monitor on or off. The other contro l buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the [...]

User’s Manual 1 6 FRONT P ANEL CONTROL • Power Button: Press this button to switch ON/OFF of monitor ’s power . • Power Indicator: — Power On mode. Orange — Power Saving mode. • MENU / ENTER: 1. Activate the OSD menu or adjust t he function settings and confirmation or 2. Exit OSD menu when in volume OSD status. • Adjust : 1. Activa[...]

User’s Manual 1 7 HOW T O ADJUST A SETTING M M a a i i n n M M e e n n u u FUNCTION DESCRIPTION Brightness Select the 「 Brightness 」 option on the 「 Main Menu 」 . Enter the option by pressing the button again, and adjust the level. Contrast Select the 「 Contrast 」 option on the 「 Main Menu 」 . Enter the option by pressing the butt[...]

User’s Manual 1 8 Clock Adjustment Select the 「 Clock Adjustment 」 option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level. Phase Adjustment Select the 「 Phase Adjustment 」 option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level. Exit Exit [...]

User’s Manual 1 9 OSD Color Select the 「 OSD Color 」 setting option to adjust the color of the OSD. Enter the option and adjust the level. Language Select the 「 Language 」 option to change the language of the OSD. Enter the option and select a language. (Reference only , the OSD Language is depended on selected model) Exit Exit the OSD me[...]

User’s Manual 20 PLUG AND PLA Y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of it s identity and, depending on the level of DDC used, communicate additional information about its display cap abilities. The DDC2B is a bidire[...]

User’s Manual 21 TECHNICAL SUPPORT (F AQ) Q & A FOR GENERAL PROBLEMS PROBLEM & QUESTION POSSIBLE SOLUTION Power LED is not on *Check if the Power Switch is in the ON position *Power Cord should be connected No Plug & Play *Check if the PC system is Plug & Play compatible *Check if the V ideo Card is Plug & Play compatible *Che[...]

User’s Manual 22 ERROR MESSAGE & POSSIBLE SOLUTIONS  CABLE NOT CONNECTED : 1. Check that the signal-cable is pr operly co nnected, If the connector is loose, tighten the connector ’s screws. 2. Check the signal-cable’s connection pins for damage.  INPUT NOT SUPPORT : Your computer has been set to unsuitable di splay mode, set the co[...]

User’s Manual 2 3 APPENDIX SPECIFICA TIONS Driving system TFT Color LCD Size 19.0" LCD Panel Pixel pitch 0.2835mm(H) x 0.2835mm(V) H-Frequency 30KHz – 80KHz V ideo V -Frequency 55 – 75Hz Display Colors 16.2M Colors Max. Resolution 1440 x 900 @75Hz Plug & Play VESA DDC2B TM ON Mode ≤ 42W Power Saving Mode ≤ 1W EP A ENERGY ST AR ®[...]